ca sysview performance management 14.0 ca rs · pdf fileca sysview performance management 13.9...
TRANSCRIPT
CA SYSVIEW Performance Management 14.0 1
CA RS 1409 Service ListCA SYSVIEW Performance Management 14.0 1
CA RS 1409 Service List
Release Service Description Type
14.0 RO70267 CSCHEDUL day field incorrect when turned off PTF
RO70334 CICS SNMP trap alert description is truncated PTF
RO70343 CICS abend S0C4 task GSVCSDCS module GSVCDCCR PTF
RO70540 GSVC100W Message incorrect when bad CICS TRANID PTF
RO70578 LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED PTF
RO71580 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO72154 ATTN key not always honored in logstream searches PTF
RO72315 Provide totals in SMF summary records instead of averages PTF
RO72335 SMF71 type records not processed at z/os 1.13 PTF
RO72413 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72632 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO72996 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this release is 12
CA SYSVIEW Performance Management 13.9 2
CA RS 1409 Service ListCA SYSVIEW Performance Management 13.9 2
CA RS 1409 Service List
Release Service Description Type
13.9 RO67986 CICS DLI variables may produce incorrect results PTF
RO70118 Provide totals in SMF summary records instead of averages PTF
RO70538 GSVC100W Message incorrect when bad CICS TRANID PTF
RO70577 LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED PTF
RO71579 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO71876 SMF71 type records not processed at z/os 1.13 PTF
RO72153 ATTN key not always honored in logstream searches PTF
RO72418 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72674 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73030 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this release is 10
CA SYSVIEW Performance Management 13.7 3
CA RS 1409 Service ListCA SYSVIEW Performance Management 13.7 3
CA RS 1409 Service List
Release Service Description Type
13.7 RO70113 Provide totals in SMF summary records instead of averages PTF
RO70182 GSVC100W Message incorrect when bad CICS TRANID PTF
RO71662 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO72405 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72735 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73034 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this release is 6
CA SYSVIEW Performance Management 13.5 4
CA RS 1409 Service ListCA SYSVIEW Performance Management 13.5 4
CA RS 1409 Service List
Release Service Description Type
13.5 RO71614 GSVC100W Message incorrect when bad CICS TRANID PTF
RO72420 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72739 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73035 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this release is 4
CA SYSVIEW Performance Management 5
CA RS 1409 Service List for CNM4D50CA SYSVIEW Performance Management 5
CA RS 1409 Service List for CNM4D50
FMID Service Description Type
CNM4D50 RO71614 GSVC100W Message incorrect when bad CICS TRANID PTF
RO72420 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72739 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73035 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this FMID is 4
CA SYSVIEW Performance Management 6
CA RS 1409 Service List for CNM4D70CA SYSVIEW Performance Management 6
CA RS 1409 Service List for CNM4D70
FMID Service Description Type
CNM4D70 RO70113 Provide totals in SMF summary records instead of averages PTF
RO70182 GSVC100W Message incorrect when bad CICS TRANID PTF
RO71662 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO72405 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72735 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73034 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this FMID is 6
CA SYSVIEW Performance Management 7
CA RS 1409 Service List for CNM4D90CA SYSVIEW Performance Management 7
CA RS 1409 Service List for CNM4D90
FMID Service Description Type
CNM4D90 RO67986 CICS DLI variables may produce incorrect results PTF
RO70118 Provide totals in SMF summary records instead of averages PTF
RO70538 GSVC100W Message incorrect when bad CICS TRANID PTF
RO70577 LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED PTF
RO71579 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO71876 SMF71 type records not processed at z/os 1.13 PTF
RO72153 ATTN key not always honored in logstream searches PTF
RO72418 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72674 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO73030 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this FMID is 10
CA SYSVIEW Performance Management 8
CA RS 1409 Service List for CNM4E00CA SYSVIEW Performance Management 8
CA RS 1409 Service List for CNM4E00
FMID Service Description Type
CNM4E00 RO70267 CSCHEDUL day field incorrect when turned off PTF
RO70334 CICS SNMP trap alert description is truncated PTF
RO70343 CICS abend S0C4 task GSVCSDCS module GSVCDCCR PTF
RO70540 GSVC100W Message incorrect when bad CICS TRANID PTF
RO70578 LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED PTF
RO71580 XSSYSTEM column displayed when XSYSTEM component is turned off PTF
RO72154 ATTN key not always honored in logstream searches PTF
RO72315 Provide totals in SMF summary records instead of averages PTF
RO72335 SMF71 type records not processed at z/os 1.13 PTF
RO72413 SYSL003E SYSLOG FOR SYSTEM NOT FOUND PTF
RO72632 DELAYS MISSING DETAIL DATA FOR REASON XCF PTF
RO72996 GSV3211E XUTLR PING request abended U2999-1201 PTF
The CA RS 1409 service count for this FMID is 12
CA SYSVIEW Performance Management 14.0 9
CA RS 1409 - PTF RO70267 DetailsCA SYSVIEW Performance Management 14.0 9
CA RS 1409 - PTF RO70267 Details
Release Service Details14.0 RO70267 RO70267 M.C.S. ENTRIES = ++PTF(RO70267)
DESC(CSCHEDUL day field incorrect when turned off)
/*
PROBLEM DESCRIPTION:
If a specific day of the week is turned off via the CSCHEDUL display
the following day is the one that actually gets turned off.
When overtyping the day of the week with 'NO' for a function you do not
want scheduled, the following day is the one that gets turned off.
SYMPTOMS:
The incorrect day of the week is turned off when modifying the
CSCHEDUL display.
IMPACT:
Incorrect day of the week is turned off for scheduled function.
CIRCUMVENTION:
Turn off the previous day of the week from the one you actually are
turning off.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0002).
CA SYSVIEW Performance Management 14.0 10
CA RS 1409 - PTF RO70334 DetailsCA SYSVIEW Performance Management 14.0 10
CA RS 1409 - PTF RO70334 Details
Release Service Details14.0 RO70334 RO70334 M.C.S. ENTRIES = ++PTF(RO70334)
DESC(CICS SNMP trap alert description is truncated)
/*
PROBLEM DESCRIPTION:
This fix addresses the following problems:
1. When the length of the CICS SNMP trap alert message is greater
than 255 bytes a section of the description field at the end of the
message will be truncated.
2. No SNMP trap event notification is sent when an exception alert
is triggered for a CICS defined threshold or state rule.
SYMPTOMS:
1. The description field of CICS SNMP trap message is truncated.
For example, the SNMP trap message for TSUMRATE variable
is being received as:
CAGSVX02 ... Transaction summary - Rate per miSNMPDATA
2. No SNMP trap message is sent when an exeption alert is triggered
for CICS threshold or state rule.
IMPACT:
Missing data in CICS SNMP trap message.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0005).
++HOLD(RO70334) FMID(CNM4E00)
SYSTEM
REASON(RESTART)
DATE(14142)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 14.0 11
CA RS 1409 - PTF RO70343 DetailsCA SYSVIEW Performance Management 14.0 11
CA RS 1409 - PTF RO70343 Details
Release Service Details14.0 RO70343 RO70343 M.C.S. ENTRIES = ++PTF(RO70343)
DESC(CICS abend S0C4 task GSVCSDCS module GSVCDCCR)
/*
PROBLEM DESCRIPTION:
Abend S0C4 is possible in the SYSVIEW for CICS System Data Collection
Subtask, GSVCSDCS. This is a timing related problem that can occur when
two or more asynchronous tasks attempt to read from and write to the
same data collection element in parallel. The data collection elements
are not properly serialized.
SYMPTOMS:
Messages similar to the following may be observed in the CICS joblog:
GSVC991E (SDCS) Task GSVCSDCS Module GSVCDCCR Offset 0000211A
GSVC992E (SDCS) Abend S0C4 PSW 078C1001 B97D3682 Ilc 4 Intc 11
GSVC996E (SDCS) Registers at entry to abend
GSVC995E (SDCS) AR/GR 00: 00000000/00000000_00000000
01: 00000000/00000000_3994B436
GSVC995E (SDCS) AR/GR 02: 00000000/00000000_269E3880
03: 00000000/00000000_0001B160
GSVC995E (SDCS) AR/GR 04: 00000000/00000000_001BB060
05: 00000000/00000048_001BF4C0
GSVC995E (SDCS) AR/GR 06: 00000000/00000000_39685000
07: 00000000/00000000_39685000
GSVC995E (SDCS) AR/GR 08: 00000000/00000000_397D8DE8
09: 00000000/00000000_398E9000
GSVC995E (SDCS) AR/GR 10: 00000000/00000000_2697A000
11: 00000000/00000000_397D34D8
GSVC995E (SDCS) AR/GR 12: 00000000/00000000_399198D0
13: 00000000/00000000_398EA708
GSVC995E (SDCS) AR/GR 14: 00000000/00000000_397D1791
15: 00000000/00000000_397D34D8
GSVC998E (SDCS) End of symptom dump
GSVC300I (SDCS) SVC dump Requested
GSVC305I (SDCS) SDUMPX complete, SVC dump captured
GSVC404I (SDCS) Task GSVCSDCS has been zIIP disabled
GSVC014I (SDCS) Subtask GSVCSDCS restarting
GSVC404I (SDCS) Task GSVCSDCS has been zIIP enabled
IMPACT:
SYSVIEW for CICS system data collection is temporarily interrupted
until the GSVCSDCS subtask recovers and restarts.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0006).
++HOLD(RO70343) FMID(CNM4E00)
SYSTEM
REASON(RESTART)
DATE(14142)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 14.0 12
CA RS 1409 - PTF RO70540 DetailsCA SYSVIEW Performance Management 14.0 12
CA RS 1409 - PTF RO70540 Details
Release Service Details14.0 RO70540 RO70540 M.C.S. ENTRIES = ++PTF(RO70540)
DESC(GSVC100W Message incorrect when bad CICS TRANID)
/*
PROBLEM DESCRIPTION:
When a user enters a CICS transaction with an invalid ID such as ".8",
any resulting GSVC100W threshold message will not show the invalid
transaction id properly causing the parsing of this message to be
incorrect.
SYMPTOMS:
If user enters a CICS transaction with an invalid ID such as ".8",
the transaction id is being concatenated to other field(s) in the GSVC100W
similar to the following message:
GSVC100W (TPPT) TRANEND TRANS LIFETIME.8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname.8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
When the correct format of the message should be:
GSVC100W (TPPT) TRANEND TRANS LIFETIME .8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname .8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
IMPACT:
Incorrect information received when parsing the GSVC100W message.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
PRE(RO70272)
SUP(TSE0010).
++HOLD(RO70540) FMID(CNM4E00)
SYSTEM
REASON(RESTART)
DATE(14150)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 14.0 13
CA RS 1409 - PTF RO70578 DetailsCA SYSVIEW Performance Management 14.0 13
CA RS 1409 - PTF RO70578 Details
Release Service Details14.0 RO70578 RO70578 M.C.S. ENTRIES = ++PTF(RO70578)
DESC(LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED)
/*
PROBLEM DESCRIPTION:
When CAPMAINT runs to clean up old Capture data sets --
on demand or via SCHEDULE (normally at noon and midnight)
-- it uses an incorrect User ID (GSVVCAPI) for every data
set that is migrated or multi-volume.
SYMPTOMS:
When the Capture Maintenance event is run to clean up
old capture data sets, one of the following messages will
be issued once for every capture data set that is either
migrated or multi-volume:
If the security system is ACF2:
ACF01004 LOGONID GSVVCAPI NOT FOUND
If the security system is Top Secret:
TSS7145E ACCESSOR ID GSVVCAPI NOT DEFINED TO SECURITY
If the security system is RACF:
ICH08001I GSVVCAPI NOT DEFINED TO RACF
IMPACT:
Unable to use CAPMAINT to clean up migrated or multi-volume
data sets.
CIRCUMVENTION:
For migrated data sets: Recall them before CAPMAINT runs.
For multi-volume data sets: None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0012).
CA SYSVIEW Performance Management 14.0 14
CA RS 1409 - PTF RO71580 DetailsCA SYSVIEW Performance Management 14.0 14
CA RS 1409 - PTF RO71580 Details
Release Service Details14.0 RO71580 RO71580 M.C.S. ENTRIES = ++PTF(RO71580)
DESC(XSSYSTEM column displayed when XSYSTEM component is turned off)
/*
PROBLEM DESCRIPTION:
When starting SYSVIEW with the cross system component turned off it
will still display the XSSystem column when issuing cross system
capable commands.
The following option is specified in the system configuration member
of the system parmlib concatenation:
Component-XSYSTEM No
SYMPTOMS:
After starting SYSVIEW with the cross system component turned off, you
will still see the XSSystem column in cross system eligible commands.
When listing the cross system commands with the XSCMDS command, the
DATA and GROUP columns display garbage for all commands.
IMPACT:
Extra column displayed for cross system eligible commands.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
PRE(RO71062)
SUP(TSE0026).
CA SYSVIEW Performance Management 14.0 15
CA RS 1409 - PTF RO72154 DetailsCA SYSVIEW Performance Management 14.0 15
CA RS 1409 - PTF RO72154 Details
Release Service Details14.0 RO72154 RO72154 M.C.S. ENTRIES = ++PTF(RO72154)
DESC(ATTN key not always honored in logstream searches)
/*
PROBLEM DESCRIPTION:
When executing any of the following commands that browse
or search log streams, it should be possible to interrupt
the command at any time:
AUDITLog
CSYSDATA
CTRANLog
CTRANSUM
HCLog
IMSOMAT
IMSRSLog
IMSTLog
MQRLog
OPERLOG
PLOTLOG
SMFLOG
XLOG
The search is interruptible 100% of the time (using the
PA1 key) when SYSVIEW is being run from a VTAM session.
The search should also be interruptible 100% of the time
(using the ATTN key) when SYSVIEW is being run from a
TSO or ISPF session, but is, in fact, only interruptible
about 30-40% of the time in the following circumstances:
- The system does not have any zIIP processors, or
- the zIIPEnable parameter in the OPTIONS member of
Parmlib is set to NO.
SYMPTOMS:
When trying to stop a long-running command that is
browsing or searching a log stream, the ATTN key is not
always effective.
"|", "|A", or "|I" may be displayed on the user's screen
by the TSO command processor, but the long-running log
stream command will continue running. The meaning of
these displays may be found in section "How Attention
Interruptions are Processed" of IBM's TSO Programming
Guide (SA22-7788 for z/OS 1.x; SA32-0981 for z/OS 2.x).
IMPACT:
It will not always be possible to interrupt long-running
commands that access a log stream. When the command is
not interruptible, the only ways to stop it are to:
- cancel the user's SYSVIEW session from the
USERS display
- cancel the user's entire TSO session
- simply allow the command to continue running
until it completes on its own.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
PRE(RO70441)
SUP(TSE0033).
CA SYSVIEW Performance Management 14.0 16
CA RS 1409 - PTF RO72315 DetailsCA SYSVIEW Performance Management 14.0 16
CA RS 1409 - PTF RO72315 Details
Release Service Details14.0 RO72315 RO72315 M.C.S. ENTRIES = ++PTF(RO72315)
DESC(Provide totals in SMF summary records instead of averages)
/*
PROBLEM DESCRIPTION:
Currently SYSVIEW CICS Transaction Summary records (subtype 25) contain
average time values. When using Report Writer to summarize multiple
intervals, it will average a total of averages which provides an
incorrect average value.
This fix changes the SMF 255 subtype 25 records so they are straight
totals instead of averages. This includes all of the time values
included in the CTRANSUM record produced. Once this fix is applied
there will also be a new version bit setting that can be evaluated to
determine if a record was produced before or after this fix is applied.
With this fix applied CTSD_Hdr_RecVerCurr will be equal to the value
of CTSD_Hdr_RecVer04 as it is defined in CNM4BMAC(CSMF025) and
CNM4ZMAC(CSMF025).
This fix also changes the value of CTSD_Count to be CTSD_Included
in CNM4BMAC(CSMF025), and will now represent just the Included value
and not include the Excluded number after this fix is applied.
SYMPTOMS:
Averages in Report Writer reports shows much smaller than they should
be.
IMPACT:
Averaging in Report Writer provides incorrect values.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0036).
++HOLD(RO72315) FMID(CNM4E00)
SYSTEM
REASON(ENH)
DATE(14212)
COMMENT(
Prior to this PTF the times saved in the CTRANSUM SMF 255 subtype
25 record contained an average time in the Transaction Summary
area. With this fix all times will now reflect total times rather
than averages.
This change was to address an issue in Report Writer when reporting
on time values because Report Writer in turn averaged the values
resulting in incorrect reporting.
This fix also provides a version level for the records. With this
fix applied the version will now be set to 04 and can be checked in
field CTSD_Hdr_RecVer of the CSMF025 macro layout located in
CNM4BMAC library.
).
CA SYSVIEW Performance Management 14.0 17
CA RS 1409 - PTF RO72335 DetailsCA SYSVIEW Performance Management 14.0 17
CA RS 1409 - PTF RO72335 Details
Release Service Details14.0 RO72335 RO72335 M.C.S. ENTRIES = ++PTF(RO72335)
DESC(SMF71 type records not processed at z/os 1.13)
/*
PROBLEM DESCRIPTION:
At z/OS 1.13 the SMF 71 triplet section 'Swap Placement Section' is
no longer valid and will contain zeros. When using Report Writer
to produce PAGE type reports, the SMF 71 records were bypassed due
to the Swap Placement section being empty.
SYMPTOMS:
Reports not produced using PAGE variables in Report Writer at
z/OS 1.13, where reports were produced at 1.12 successfully.
IMPACT:
Reports are not produced.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA EXPLORE Report Writer 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0037).
CA SYSVIEW Performance Management 14.0 18
CA RS 1409 - PTF RO72413 DetailsCA SYSVIEW Performance Management 14.0 18
CA RS 1409 - PTF RO72413 Details
Release Service Details14.0 RO72413 RO72413 M.C.S. ENTRIES = ++PTF(RO72413)
DESC(SYSL003E SYSLOG FOR SYSTEM NOT FOUND)
/*
PROBLEM DESCRIPTION:
Some SYSLOG job output on the JES PURGE queue causes a problem when
trying to view the current SYSLOG from SYSVIEW.
SYMPTOMS:
Entering the SYSLOG command while SYSLOG output is on the PURGE queue
results in the following error message:
SYSL003E SYSLOG for <sysid> system not found
IMPACT:
Temporarily unable to use the SYSLOG command.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0038).
CA SYSVIEW Performance Management 14.0 19
CA RS 1409 - PTF RO72632 DetailsCA SYSVIEW Performance Management 14.0 19
CA RS 1409 - PTF RO72632 Details
Release Service Details14.0 RO72632 RO72632 M.C.S. ENTRIES = ++PTF(RO72632)
DESC(DELAYS MISSING DETAIL DATA FOR REASON XCF)
/*
PROBLEM DESCRIPTION:
When a job is delayed due to XCF resources the DELAYS command display
only shows a single path.
SYMPTOMS:
When a job shows as being delayed for Reason XCF on the DELAYS command
display, the Detail field will only contain a single path even though
it may be waiting on more than one path.
IMPACT:
DELAYS only shows limited reasons for XCF delays.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0039).
CA SYSVIEW Performance Management 14.0 20
CA RS 1409 - PTF RO72996 DetailsCA SYSVIEW Performance Management 14.0 20
CA RS 1409 - PTF RO72996 Details
Release Service Details14.0 RO72996 RO72996 M.C.S. ENTRIES = ++PTF(RO72996)
DESC(GSV3211E XUTLR PING request abended U2999-1201)
/*
PROBLEM DESCRIPTION:
Issuing PING for an IPV6 address is not handled correctly.
SYMPTOMS:
Issuing the PING command for an IPV6 address fails with the
following error when zIIPEnable YES:
GSV3211E XUTLR PING request abended U2999-1201
The following abend messages appear in the SYSVIEW STC joblog:
GSVX964E (UTIL) XRREX TERM not valid, XRREX INIT not done
GSVX451E (UTIL) Abend U2999-1201 in Utility services
GSVX457I (UTIL) Psw 078C0000 BA7550D4 Ilc 2 Intc 0D
GSVX477I (UTIL) Key 8 State SUP Am 31 Asc PRI
GSVX458I (UTIL) Module GSVXNUC Addr 3A714000 Offset 000410D4
GSVX458I (UTIL) NucMod GSVXIIPR Addr 3A750D18 Offset 000043BC
GSVX473I (UTIL) Routne ZPPP$$ Addr 3A754EA0 Offset 00000234
GSVX459I (UTIL) Data at PSW addr 3A7550CE
GSVX460I (UTIL) A7F81201 0A0DB982 0000B982
GSVX455I (UTIL) General registers at entry to abend
GSVX467I (UTIL) R0-R1 00000000_00000000 00000000_04000BB7
GSVX467I (UTIL) R2-R3 00000000_00000080 00000000_3BB79170
GSVX467I (UTIL) R4-R5 00000000_00000054 00000000_3A8E6704
GSVX467I (UTIL) R6-R7 00000000_00000000 00000000_3BB79C48
GSVX467I (UTIL) R8-R9 00000000_3B37A000 00000000_3B7B6060
GSVX467I (UTIL) R10-R11 00000000_3A755470 00000000_3B378000
GSVX467I (UTIL) R12-R13 00000000_3A754EA0 00000000_3B383428
GSVX467I (UTIL) R14-R15 00000000_BA7550CA 00000000_00001201
GSVX475I (UTIL) Access registers at entry to abend
GSVX461I (UTIL) AR0-AR3 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR4-AR7 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR8-AR11 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR12-AR15 00000000 00000000 00000000 00000000
GSVX462I (UTIL) End of symptom dump
Issuing the PING command for an IPV6 address works with
zIIPEnable NO, but a successive PING for an IPV4 address will
time out.
IMPACT:
An abend may occur with a dump being taken, and the UTIL task
in the SYSVIEW server address space may have to be recycled
using the Stop/Start or possibly Cancel/Start line commands
from the ASADMIN command display.
CIRCUMVENTION:
Temporarily specify zIIPEnable NO in the OPTIONS parmlib member
to circumvent the U2999-1201 abend.
PRODUCTS AFFECTED:
CA SYSVIEW 14.0
*/.
++VER(Z038) FMID(CNM4E00)
SUP(TSE0040).
CA SYSVIEW Performance Management 13.9 21
CA RS 1409 - PTF RO67986 DetailsCA SYSVIEW Performance Management 13.9 21
CA RS 1409 - PTF RO67986 Details
Release Service Details13.9 RO67986 RO67986 M.C.S. ENTRIES = ++PTF(RO67986)
DESC(CICS DLI variables may produce incorrect results)
/*
PROBLEM DESCRIPTION:
Requesting CICS DLI reports in Report Writer may produce incorrect
columns of data due to a problem determining what variables
should be reported on.
SYMPTOMS:
Duplicate columns of data may be produced when using variables like
GN, GNP, and GHNP. When running Report Writer with similar variables
you may end up with duplicate columns of data, for example you may
have 2 columns for DLI DB GN and DLI DB GHN.
IMPACT:
Duplicate data in Report Writer output.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA EXPLORE Report Writer 13.9
*/.
++VER(Z038) FMID(CNM4D90)
PRE(RO63658 RO68319)
SUP(TSD9103).
CA SYSVIEW Performance Management 13.9 22
CA RS 1409 - PTF RO70118 DetailsCA SYSVIEW Performance Management 13.9 22
CA RS 1409 - PTF RO70118 Details
Release Service Details13.9 RO70118 RO70118 M.C.S. ENTRIES = ++PTF(RO70118)
DESC(Provide totals in SMF summary records instead of averages)
/*
PROBLEM DESCRIPTION:
Currently SYSVIEW CICS Transaction Summary records (subtype 25) contain
average time values. When using Report Writer to summarize multiple
intervals, it will average a total of averages which provides an
incorrect average value.
This fix changes the SMF 255 subtype 25 records so they are straight
totals instead of averages. This includes all of the time values
included in the CTRANSUM record produced. Once this fix is applied
there will also be a new version bit setting that can be evaluated to
determine if a record was produced before or after this fix is applied.
With this fix applied CTSD_Hdr_RecVerCurr will be equal to the value
of CTSD_Hdr_RecVer04 as it is defined in CNM4BMAC(CSMF025) and
CNM4ZMAC(CSMF025).
This fix also changes the value of CTSD_Count to be CTSD_Included
in CNM4BMAC(CSMF025), and will now represent just the Included value
and not include the Excluded number after this fix is applied.
SYMPTOMS:
Averages in Report Writer reports shows much smaller than they should
be.
IMPACT:
Averaging in Report Writer provides incorrect values.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
CA EXPLORE Report Writer r13.9
*/.
++VER(Z038) FMID(CNM4D90)
PRE(RO67937)
SUP(TSD9134).
++HOLD(RO70118) FMID(CNM4D90)
SYSTEM
REASON(ENH)
DATE(14136)
COMMENT(
Prior to this PTF the times saved in the CTRANSUM SMF 255 subtype
25 record contained an average time in the Transaction Summary
area. With this fix all times will now reflect total times
rather than averages.
This change was to address an issue in Report Writer when
reporting on time values because Report Writer in turn averaged
the values resulting in incorrect reporting.
This fix also provides a version level for the records. With
this fix applied the version will now be set to 04 and can be
checked in field CTSD_Hdr_RecVer of the CSMF025 macro layout
located in CNM4BMAC library.
).
CA SYSVIEW Performance Management 13.9 23
CA RS 1409 - PTF RO70538 DetailsCA SYSVIEW Performance Management 13.9 23
CA RS 1409 - PTF RO70538 Details
Release Service Details13.9 RO70538 RO70538 M.C.S. ENTRIES = ++PTF(RO70538)
DESC(GSVC100W Message incorrect when bad CICS TRANID)
/*
PROBLEM DESCRIPTION:
When a user enters a CICS transaction with an invalid ID such as ".8",
any resulting GSVC100W threshold message will not show the invalid
transaction id properly causing the parsing of this message to be
incorrect.
SYMPTOMS:
If user enters a CICS transaction with an invalid ID such as ".8",
the transaction id is being concatenated to other field(s) in the GSVC100W
similar to the following message:
GSVC100W (TPPT) TRANEND TRANS LIFETIME.8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname.8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
When the correct format of the message should be:
GSVC100W (TPPT) TRANEND TRANS LIFETIME .8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname .8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
IMPACT:
Incorrect information received when parsing the GSVC100W message.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
PRE(RO68346 RO69924)
SUP(TSD9143).
++HOLD(RO70538) FMID(CNM4D90)
SYSTEM
REASON(RESTART)
DATE(14150)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 13.9 24
CA RS 1409 - PTF RO70577 DetailsCA SYSVIEW Performance Management 13.9 24
CA RS 1409 - PTF RO70577 Details
Release Service Details13.9 RO70577 RO70577 M.C.S. ENTRIES = ++PTF(RO70577)
DESC(LOGONID/ACCESSOR/USER ID GSVVCAPI NOT FOUND/DEFINED)
/*
PROBLEM DESCRIPTION:
When CAPMAINT runs to clean up old Capture data sets --
on demand or via SCHEDULE (normally at noon and midnight)
-- it uses an incorrect User ID (GSVVCAPI) for every data
set that is migrated or multi-volume.
SYMPTOMS:
When the Capture Maintenance event is run to clean up
old capture data sets, one of the following messages will
be issued once for every capture data set that is either
migrated or multi-volume:
If the security system is ACF2:
ACF01004 LOGONID GSVVCAPI NOT FOUND
If the security system is Top Secret:
TSS7145E ACCESSOR ID GSVVCAPI NOT DEFINED TO SECURITY
If the security system is RACF:
ICH08001I GSVVCAPI NOT DEFINED TO RACF
IMPACT:
Unable to use CAPMAINT to clean up migrated or multi-volume
data sets.
CIRCUMVENTION:
For migrated data sets: Recall them before CAPMAINT runs.
For multi-volume data sets: None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
SUP(TSD9145).
CA SYSVIEW Performance Management 13.9 25
CA RS 1409 - PTF RO71579 DetailsCA SYSVIEW Performance Management 13.9 25
CA RS 1409 - PTF RO71579 Details
Release Service Details13.9 RO71579 RO71579 M.C.S. ENTRIES = ++PTF(RO71579)
DESC(XSSYSTEM column displayed when XSYSTEM component is turned off)
/*
PROBLEM DESCRIPTION:
When starting SYSVIEW with the cross system component turned off it
will still display the XSSystem column when issuing cross system
capable commands.
The following option is specified in the system configuration member
of the system parmlib concatenation:
Component-XSYSTEM No
SYMPTOMS:
After starting SYSVIEW with the cross system component turned off, you
will still see the XSSystem column in cross system eligible commands.
When listing the cross system commands with the XSCMDS command, the
DATA and GROUP columns display garbage for all commands.
IMPACT:
Extra column displayed for cross system eligible commands.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
PRE(RO70976)
SUP(TSD9152).
CA SYSVIEW Performance Management 13.9 26
CA RS 1409 - PTF RO71876 DetailsCA SYSVIEW Performance Management 13.9 26
CA RS 1409 - PTF RO71876 Details
Release Service Details13.9 RO71876 RO71876 M.C.S. ENTRIES = ++PTF(RO71876)
DESC(SMF71 type records not processed at z/os 1.13)
/*
PROBLEM DESCRIPTION:
At z/OS 1.13 the SMF 71 triplet section 'Swap Placement Section' is
no longer valid and will contain zeros. When using Report Writer
to produce PAGE type reports, the SMF 71 records were bypassed due
to the Swap Placement section being empty.
SYMPTOMS:
Reports not produced using PAGE variables in Report Writer at
z/OS 1.13, where reports were produced at 1.12 successfully.
IMPACT:
Reports are not produced.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA EXPLORE Report Writer 13.9
*/.
++VER(Z038) FMID(CNM4D90)
SUP(TSD9157).
CA SYSVIEW Performance Management 13.9 27
CA RS 1409 - PTF RO72153 DetailsCA SYSVIEW Performance Management 13.9 27
CA RS 1409 - PTF RO72153 Details
Release Service Details13.9 RO72153 RO72153 M.C.S. ENTRIES = ++PTF(RO72153)
DESC(ATTN key not always honored in logstream searches)
/*
PROBLEM DESCRIPTION:
When executing any of the following commands that browse
or search log streams, it should be possible to interrupt
the command at any time:
AUDITLog
CSYSDATA
CTRANLog
CTRANSUM
HCLog
IMSOMAT
IMSRSLog
IMSTLog
MQRLog
OPERLOG
PLOTLOG
SMFLOG
XLOG
The search is interruptible 100% of the time (using the
PA1 key) when SYSVIEW is being run from a VTAM session.
The search should also be interruptible 100% of the time
(using the ATTN key) when SYSVIEW is being run from a
TSO or ISPF session, but is, in fact, only interruptible
about 30-40% of the time in the following circumstances:
- The system does not have any zIIP processors, or
- the zIIPEnable parameter in the OPTIONS member of
Parmlib is set to NO.
SYMPTOMS:
When trying to stop a long-running command that is
browsing or searching a log stream, the ATTN key is not
always effective.
"|", "|A", or "|I" may be displayed on the user's screen
by the TSO command processor, but the long-running log
stream command will continue running. The meaning of
these displays may be found in section "How Attention
Interruptions are Processed" of IBM's TSO Programming
Guide (SA22-7788 for z/OS 1.x; SA32-0981 for z/OS 2.x).
IMPACT:
It will not always be possible to interrupt long-running
commands that access a log stream. When the command is
not interruptible, the only ways to stop it are to:
- cancel the user's SYSVIEW session from the
USERS display
- cancel the user's entire TSO session
- simply allow the command to continue running
until it completes on its own.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
PRE(RO61837 RO64495 RO70024 RO70440)
SUP(TSD9161).
CA SYSVIEW Performance Management 13.9 28
CA RS 1409 - PTF RO72418 DetailsCA SYSVIEW Performance Management 13.9 28
CA RS 1409 - PTF RO72418 Details
Release Service Details13.9 RO72418 RO72418 M.C.S. ENTRIES = ++PTF(RO72418)
DESC(SYSL003E SYSLOG FOR SYSTEM NOT FOUND)
/*
PROBLEM DESCRIPTION:
Some SYSLOG job output on the JES PURGE queue causes a problem when
trying to view the current SYSLOG from SYSVIEW.
SYMPTOMS:
Entering the SYSLOG command while SYSLOG output is on the PURGE queue
results in the following error message:
SYSL003E SYSLOG for <sysid> system not found
IMPACT:
Temporarily unable to use the SYSLOG command.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
SUP(RO64339 TSD9163).
CA SYSVIEW Performance Management 13.9 29
CA RS 1409 - PTF RO72674 DetailsCA SYSVIEW Performance Management 13.9 29
CA RS 1409 - PTF RO72674 Details
Release Service Details13.9 RO72674 RO72674 M.C.S. ENTRIES = ++PTF(RO72674)
DESC(DELAYS MISSING DETAIL DATA FOR REASON XCF)
/*
PROBLEM DESCRIPTION:
When a job is delayed due to XCF resources the DELAYS command display
only shows a single path.
SYMPTOMS:
When a job shows as being delayed for Reason XCF on the DELAYS command
display, the Detail field will only contain a single path even though
it may be waiting on more than one path.
IMPACT:
DELAYS only shows limited reasons for XCF delays.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
SUP(TSD9164).
CA SYSVIEW Performance Management 13.9 30
CA RS 1409 - PTF RO73030 DetailsCA SYSVIEW Performance Management 13.9 30
CA RS 1409 - PTF RO73030 Details
Release Service Details13.9 RO73030 RO73030 M.C.S. ENTRIES = ++PTF(RO73030)
DESC(GSV3211E XUTLR PING request abended U2999-1201)
/*
PROBLEM DESCRIPTION:
Issuing PING for an IPV6 address is not handled correctly.
SYMPTOMS:
Issuing the PING command for an IPV6 address fails with the
following error when zIIPEnable YES:
GSV3211E XUTLR PING request abended U2999-1201
The following abend messages appear in the SYSVIEW STC joblog:
GSVX964E (UTIL) XRREX TERM not valid, XRREX INIT not done
GSVX451E (UTIL) Abend U2999-1201 in Utility services
GSVX457I (UTIL) Psw 078C0000 BAA36B3C Ilc 2 Intc 0D
GSVX477I (UTIL) Key 8 State SUP Am 31 Asc PRI
GSVX458I (UTIL) Module GSVXNUC Addr 3A715000 Offset 00321B3C
GSVX458I (UTIL) NucMod GSVXIIPR Addr 3AA327A0 Offset 0000439C
GSVX473I (UTIL) Routne ZPPP$$ Addr 3AA36928 Offset 00000214
GSVX459I (UTIL) Data at PSW addr 3AA36B36
GSVX460I (UTIL) A7F81201 0A0DB982 0000B982
GSVX455I (UTIL) General registers at entry to abend
GSVX467I (UTIL) R0-R1 00000000_00000000 00000000_04000BB7
GSVX467I (UTIL) R2-R3 00000000_00000080 00000000_3B64E170
GSVX467I (UTIL) R4-R5 00000000_00000054 00000000_3AAFDA14
GSVX467I (UTIL) R6-R7 00000000_00000000 00000000_3B64EC48
GSVX467I (UTIL) R8-R9 00000000_3B359000 00000000_3B3BD060
GSVX467I (UTIL) R10-R11 00000000_3AA36ED8 00000000_3B357000
GSVX467I (UTIL) R12-R13 00000000_3AA36928 00000000_3B380428
GSVX467I (UTIL) R14-R15 00000000_BAA36B32 00000000_00001201
GSVX475I (UTIL) Access registers at entry to abend
GSVX461I (UTIL) AR0-AR3 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR4-AR7 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR8-AR11 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR12-AR15 00000000 00000000 00000000 00000000
GSVX462I (UTIL) End of symptom dump
Issuing the PING command for an IPV6 address works with
zIIPEnable NO, but a successive PING for an IPV4 address will
time out.
IMPACT:
An abend may occur with a dump being taken, and the UTIL task
in the SYSVIEW server address space may have to be recycled
using the Stop/Start or possibly Cancel/Start line commands
from the ASADMIN command display.
CIRCUMVENTION:
Temporarily specify zIIPEnable NO in the OPTIONS parmlib member
to circumvent the U2999-1201 abend.
PRODUCTS AFFECTED:
CA SYSVIEW 13.9
*/.
++VER(Z038) FMID(CNM4D90)
SUP(TSD9166).
CA SYSVIEW Performance Management 13.7 31
CA RS 1409 - PTF RO70113 DetailsCA SYSVIEW Performance Management 13.7 31
CA RS 1409 - PTF RO70113 Details
Release Service Details13.7 RO70113 RO70113 M.C.S. ENTRIES = ++PTF(RO70113)
DESC(Provide totals in SMF summary records instead of averages)
/*
PROBLEM DESCRIPTION:
Currently SYSVIEW CICS Transaction Summary records (subtype 25) contain
average time values. When using Report Writer to summarize multiple
intervals, it will average a total of averages which provides an
incorrect average value.
This fix changes the SMF 255 subtype 25 records so they are straight
totals instead of averages. This includes all of the time values
included in the CTRANSUM record produced. Once this fix is applied
there will also be a new version bit setting that can be evaluated to
determine if a record was produced before or after this fix is applied.
With this fix applied CTSD_Hdr_RecVerCurr will be equal to the value
of CTSD_Hdr_RecVer04 as it is defined in CNM4BMAC(CSMF025) and
CNM4ZMAC(CSMF025).
This fix also changes the value of CTSD_Count to be CTSD_Included
in CNM4BMAC(CSMF025), and will now represent just the Included value
and not include the Excluded number after this fix is applied.
SYMPTOMS:
Averages in Report Writer reports shows much smaller than they should
be.
IMPACT:
Averaging in Report Writer provides incorrect values.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
CA EXPLORE Report Writer r13.7
*/.
++VER(Z038) FMID(CNM4D70)
PRE(RO67840 RO56237)
SUP(TSD7246).
++HOLD(RO70113) FMID(CNM4D70)
SYSTEM
REASON(ENH)
DATE(14136)
COMMENT(
Prior to this PTF the times saved in the CTRANSUM SMF 255 subtype
25 record contained an average time in the Transaction Summary
area. With this fix all times will now reflect total times
rather than averages.
This change was to address an issue in Report Writer when
reporting on time values because Report Writer in turn averaged
the values resulting in incorrect reporting.
This fix also provides a version level for the records. With
this fix applied the version will now be set to 04 and can be
checked in field CTSD_Hdr_RecVer of the CSMF025 macro layout
located in CNM4BMAC library.
).
CA SYSVIEW Performance Management 13.7 32
CA RS 1409 - PTF RO70182 DetailsCA SYSVIEW Performance Management 13.7 32
CA RS 1409 - PTF RO70182 Details
Release Service Details13.7 RO70182 RO70182 M.C.S. ENTRIES = ++PTF(RO70182)
DESC(GSVC100W Message incorrect when bad CICS TRANID)
/*
PROBLEM DESCRIPTION:
When a user enters a CICS transaction with an invalid ID such as ".8",
any resulting GSVC100W threshold message will not show the invalid
transaction id properly causing the parsing of this message to be
incorrect.
SYMPTOMS:
If user enters a CICS transaction with an invalid ID such as ".8",
the transaction id is being concatenated to other field(s) in the GSVC100W
similar to the following message:
GSVC100W (TPPT) TRANEND TRANS LIFETIME.8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname.8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
When the correct format of the message should be:
GSVC100W (TPPT) TRANEND TRANS LIFETIME .8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname .8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
IMPACT:
Incorrect information received when parsing the GSVC100W message.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
*/.
++VER(Z038) FMID(CNM4D70)
PRE(RO64039 RO69925)
SUP(TSD7248).
++HOLD(RO70182) FMID(CNM4D70)
SYSTEM
REASON(RESTART)
DATE(14136)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 13.7 33
CA RS 1409 - PTF RO71662 DetailsCA SYSVIEW Performance Management 13.7 33
CA RS 1409 - PTF RO71662 Details
Release Service Details13.7 RO71662 RO71662 M.C.S. ENTRIES = ++PTF(RO71662)
DESC(XSSYSTEM column displayed when XSYSTEM component is turned off)
/*
PROBLEM DESCRIPTION:
When starting SYSVIEW with the cross system component turned off it
will still display the XSSystem column when issuing cross system
capable commands.
The following option is specified in the system configuration member
of the system parmlib concatenation:
Component-XSYSTEM No
SYMPTOMS:
After starting SYSVIEW with the cross system component turned off, you
will still see the XSSystem column in cross system eligible commands.
When listing the cross system commands with the XSCMDS command, the
DATA and GROUP columns display garbage for all commands.
IMPACT:
Extra column displayed for cross system eligible commands.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
*/.
++VER(Z038) FMID(CNM4D70)
PRE(RO71165)
SUP(TSD7262).
CA SYSVIEW Performance Management 13.7 34
CA RS 1409 - PTF RO72405 DetailsCA SYSVIEW Performance Management 13.7 34
CA RS 1409 - PTF RO72405 Details
Release Service Details13.7 RO72405 RO72405 M.C.S. ENTRIES = ++PTF(RO72405)
DESC(SYSL003E SYSLOG FOR SYSTEM NOT FOUND)
/*
PROBLEM DESCRIPTION:
Some SYSLOG job output on the JES PURGE queue causes a problem when
trying to view the current SYSLOG from SYSVIEW.
SYMPTOMS:
Entering the SYSLOG command while SYSLOG output is on the PURGE queue
results in the following error message:
SYSL003E SYSLOG for <sysid> system not found
IMPACT:
Temporarily unable to use the SYSLOG command.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
*/.
++VER(Z038) FMID(CNM4D70)
SUP(RO64304 TSD7273).
CA SYSVIEW Performance Management 13.7 35
CA RS 1409 - PTF RO72735 DetailsCA SYSVIEW Performance Management 13.7 35
CA RS 1409 - PTF RO72735 Details
Release Service Details13.7 RO72735 RO72735 M.C.S. ENTRIES = ++PTF(RO72735)
DESC(DELAYS MISSING DETAIL DATA FOR REASON XCF)
/*
PROBLEM DESCRIPTION:
When a job is delayed due to XCF resources the DELAYS command display
only shows a single path.
SYMPTOMS:
When a job shows as being delayed for Reason XCF on the DELAYS command
display, the Detail field will only contain a single path even though
it may be waiting on more than one path.
IMPACT:
DELAYS only shows limited reasons for XCF delays.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
*/.
++VER(Z038) FMID(CNM4D70)
PRE(RO54237)
SUP(TSD7274).
CA SYSVIEW Performance Management 13.7 36
CA RS 1409 - PTF RO73034 DetailsCA SYSVIEW Performance Management 13.7 36
CA RS 1409 - PTF RO73034 Details
Release Service Details13.7 RO73034 RO73034 M.C.S. ENTRIES = ++PTF(RO73034)
DESC(GSV3211E XUTLR PING request abended U2999-1201)
/*
PROBLEM DESCRIPTION:
Issuing PING for an IPV6 address is not handled correctly.
SYMPTOMS:
Issuing the PING command for an IPV6 address fails with the
following error when zIIPEnable YES:
GSV3211E XUTLR PING request abended U2999-1201
The following abend messages appear in the SYSVIEW STC joblog:
GSVX964E (UTIL) XRREX TERM not valid, XRREX INIT not done
GSVX451E (UTIL) Abend U2999-1201 in Utility services
GSVX457I (UTIL) Psw 078C0000 BAA6099A Ilc 2 Intc 0D
GSVX477I (UTIL) Key 8 State SUP Am 31 Asc PRI
GSVX458I (UTIL) Module GSVXNUC Addr 3A713000 Offset 0034D99A
GSVX458I (UTIL) NucMod GSVXIIPR Addr 3AA5C8A8 Offset 000040F2
GSVX473I (UTIL) Routne ZPPP$$ Addr 3AA607A0 Offset 000001FA
GSVX459I (UTIL) Data at PSW addr 3AA60994
GSVX460I (UTIL) A7F81201 0A0DB982 0000B982
GSVX455I (UTIL) General registers at entry to abend
GSVX467I (UTIL) R0-R1 00000000_00000000 00000000_04000BB7
GSVX467I (UTIL) R2-R3 00000000_00000080 00000000_3B5B5170
GSVX467I (UTIL) R4-R5 00000000_00000054 00000000_3AB24ADC
GSVX467I (UTIL) R6-R7 00000000_00000000 00000000_3B5B5C30
GSVX467I (UTIL) R8-R9 00000000_3B2F4000 00000000_3B347060
GSVX467I (UTIL) R10-R11 00000000_3AA60C50 00000000_3B2DB000
GSVX467I (UTIL) R12-R13 00000000_3AA607A0 00000000_3B2FA428
GSVX467I (UTIL) R14-R15 00000000_BAA60990 00000000_00001201
GSVX475I (UTIL) Access registers at entry to abend
GSVX461I (UTIL) AR0-AR3 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR4-AR7 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR8-AR11 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR12-AR15 00000000 00000000 00000000 00000000
GSVX462I (UTIL) End of symptom dump
Issuing the PING command for an IPV6 address works with
zIIPEnable NO, but a successive PING for an IPV4 address will
time out.
IMPACT:
An abend may occur with a dump being taken, and the UTIL task
in the SYSVIEW server address space may have to be recycled
using the Stop/Start or possibly Cancel/Start line commands
from the ASADMIN command display.
CIRCUMVENTION:
Temporarily specify zIIPEnable NO in the OPTIONS parmlib member
to circumvent the U2999-1201 abend.
PRODUCTS AFFECTED:
CA SYSVIEW 13.7
*/.
++VER(Z038) FMID(CNM4D70)
SUP(TSD7275).
CA SYSVIEW Performance Management 13.5 37
CA RS 1409 - PTF RO71614 DetailsCA SYSVIEW Performance Management 13.5 37
CA RS 1409 - PTF RO71614 Details
Release Service Details13.5 RO71614 RO71614 M.C.S. ENTRIES = ++PTF(RO71614)
DESC(GSVC100W Message incorrect when bad CICS TRANID)
/*
PROBLEM DESCRIPTION:
When a user enters a CICS transaction with an invalid ID such as ".8",
any resulting GSVC100W threshold message will not show the invalid
transaction id properly causing the parsing of this message to be
incorrect.
SYMPTOMS:
If user enters a CICS transaction with an invalid ID such as ".8",
the transaction id is being concatenated to other field(s) in the GSVC100W
similar to the following message:
GSVC100W (TPPT) TRANEND TRANS LIFETIME.8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname.8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
When the correct format of the message should be:
GSVC100W (TPPT) TRANEND TRANS LIFETIME .8 U013 NONE PROBLEM 877
V= 0.000642 W= 0.000001 P= 0.000001 UPPER 0.000000
jobname .8 89 U013 SYSVDEV
Desc='Life time of transaction '
Policy=00000048_80BA76C0
IMPACT:
Incorrect information received when parsing the GSVC100W message.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.5
*/.
++VER(Z038) FMID(CNM4D50)
PRE(RO64038 RO67177 RO47369)
SUP(TSD5319).
++HOLD(RO71614) FMID(CNM4D50)
SYSTEM
REASON(RESTART)
DATE(14190)
COMMENT(
Apply this fix and either recycle the CICS region, or use the
GSVT (terminate) and GSVS (start) transactions to recycle
SYSVIEW/CICS within the CICS region.
).
CA SYSVIEW Performance Management 13.5 38
CA RS 1409 - PTF RO72420 DetailsCA SYSVIEW Performance Management 13.5 38
CA RS 1409 - PTF RO72420 Details
Release Service Details13.5 RO72420 RO72420 M.C.S. ENTRIES = ++PTF(RO72420)
DESC(SYSL003E SYSLOG FOR SYSTEM NOT FOUND)
/*
PROBLEM DESCRIPTION:
Some SYSLOG job output on the JES PURGE queue causes a problem when
trying to view the current SYSLOG from SYSVIEW.
SYMPTOMS:
Entering the SYSLOG command while SYSLOG output is on the PURGE queue
results in the following error message:
SYSL003E SYSLOG for <sysid> system not found
IMPACT:
Temporarily unable to use the SYSLOG command.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.5
*/.
++VER(Z038) FMID(CNM4D50)
SUP(RO48334 RO64340 TSD5326).
CA SYSVIEW Performance Management 13.5 39
CA RS 1409 - PTF RO72739 DetailsCA SYSVIEW Performance Management 13.5 39
CA RS 1409 - PTF RO72739 Details
Release Service Details13.5 RO72739 RO72739 M.C.S. ENTRIES = ++PTF(RO72739)
DESC(DELAYS MISSING DETAIL DATA FOR REASON XCF)
/*
PROBLEM DESCRIPTION:
When a job is delayed due to XCF resources the DELAYS command display
only shows a single path.
SYMPTOMS:
When a job shows as being delayed for Reason XCF on the DELAYS command
display, the Detail field will only contain a single path even though
it may be waiting on more than one path.
IMPACT:
DELAYS only shows limited reasons for XCF delays.
CIRCUMVENTION:
None.
PRODUCTS AFFECTED:
CA SYSVIEW 13.5
*/.
++VER(Z038) FMID(CNM4D50)
PRE(RO53957)
SUP(TSD5327).
CA SYSVIEW Performance Management 13.5 40
CA RS 1409 - PTF RO73035 DetailsCA SYSVIEW Performance Management 13.5 40
CA RS 1409 - PTF RO73035 Details
Release Service Details13.5 RO73035 RO73035 M.C.S. ENTRIES = ++PTF(RO73035)
DESC(GSV3211E XUTLR PING request abended U2999-1201)
/*
PROBLEM DESCRIPTION:
Issuing PING for an IPV6 address is not handled correctly.
SYMPTOMS:
Issuing the PING command for an IPV6 address fails with the
following error when zIIPEnable YES:
GSV3211E XUTLR PING request abended U2999-1201
The following abend messages appear in the SYSVIEW STC joblog:
GSVX964E (UTIL) XRREX TERM not valid, XRREX INIT not done
GSVX451E (UTIL) Abend U2999-1201 in Utility services task
GSVX457I (UTIL) Psw 078C0000 BA9785B4 Ilc 2 Intc 0D
GSVX477I (UTIL) Key 8 State SUP Am 31 Asc PRI
GSVX458I (UTIL) Module GSVXNUC Addr 3A710000 Offset 002685B4
GSVX458I (UTIL) NucMod GSVXIIPR Addr 3A974F60 Offset 00003654
GSVX473I (UTIL) Routne ZPPP$$ Addr 3A9783C0 Offset 000001F4
GSVX459I (UTIL) Data at PSW addr 3A9785AE
GSVX460I (UTIL) A7F81201 0A0DEBF1 96A00024
GSVX455I (UTIL) General registers at entry to abend
GSVX467I (UTIL) R0-R1 00000000_00000000 00000000_04000BB7
GSVX467I (UTIL) R2-R3 00000000_00000080 00000000_3B97D520
GSVX467I (UTIL) R4-R5 00000000_00000054 00000000_3AA2CCA4
GSVX467I (UTIL) R6-R7 00000000_00000000 00000000_3B97DFC8
GSVX467I (UTIL) R8-R9 00000000_3B5BD000 00000000_3B6DB2E0
GSVX467I (UTIL) R10-R11 00000000_3A9787E0 00000000_3B5AE000
GSVX467I (UTIL) R12-R13 00000000_3A9783C0 00000000_3B5C3428
GSVX467I (UTIL) R14-R15 00000000_BA9785AA 00000000_00001201
GSVX475I (UTIL) Access registers at entry to abend
GSVX461I (UTIL) AR0-AR3 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR4-AR7 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR8-AR11 00000000 00000000 00000000 00000000
GSVX461I (UTIL) AR12-AR15 00000000 00000000 00000000 00000000
GSVX462I (UTIL) End of symptom dump
Issuing the PING command for an IPV6 address works with
zIIPEnable NO, but a successive PING for an IPV4 address will
time out.
IMPACT:
An abend may occur with a dump being taken, and the UTIL task
in the SYSVIEW server address space may have to be recycled
using the Stop/Start or possibly Cancel/Start line commands
from the ASADMIN command display.
CIRCUMVENTION:
Temporarily specify zIIPEnable NO in the OPTIONS parmlib member
to circumvent the U2999-1201 abend.
PRODUCTS AFFECTED:
CA SYSVIEW 13.5
*/.
++VER(Z038) FMID(CNM4D50)
SUP(RO51506 TSD5328).