c. v.b. srl valvole industriali - fast · pdf filec. v.b. srl valvole industriali - fast track...

C.V.B. Valvole Industriali s.r.l.

Via Goito, 13 – 21052 Busto Arsizio (Va) - Italy

Tel: (+39).0331.621009 Fax: (+39).0331.326769

C. C. C.VVV...BBB. . . SRLSRLSRL VALVOLEVALVOLEVALVOLE INDUSTRIALIINDUSTRIALIINDUSTRIALI --- FASTFASTFAST TRACKTRACKTRACK

COMPANYCOMPANYCOMPANY PROFILEPROFILEPROFILE



Tel: (+39).0331.621009 Fax: (+39).0331.326769

www.cvbvalves.com E-mail: [email protected]

C.V.B. valvole industriali S.r.l. is an Italian leading manufacturing company located at 25 Km. north of Milan and established in 2004 to provide

top quality metal to metal triple offsets torque seated quarter turn valve solution to the Oil and Gas Market. Although their relatively newly built

story as Company they can present a thirty year experience in the Valve Market due to both their management and employees consolidated pre-

sence either in the Industrial and Petrochemical Valve Markets. During these years C.V.B. s.r.l. have performed a constant growth business wise

and size wise following the increased demand for a vast range of products and solutions so far.

Product wise C.V.B. s.r.l. went through an internal re-organization with different product lines in such a way it would be possible to serve the

Market with specific products and services.

Presently the Product Range consist of:

• Triple eccentric metal to metal torque seated quarter turn valve ANSI standard from 3 up to 48” , from 150 up to 900 pressure class–

Materials: WCB, LCB, LCC, WCC, WC6, WC9, CF8, CF8M,CF3M,Titanium- Others according to ASTM Standard- Double Flanged, Lug, Wafer,

Butt Welded Type - QTV Series

• Triple eccentric metal to metal torque seated quarter turn valve DIN from 80 up to 1400 diameter, from PN 10 up to PN 80 pressure

class- Materials: Carbon steel: 1.0460-1.0619,Stainless Steel: 1.4581-1.4552, Alloy Steel: 1.7363-1.7365 - QTV DIN Series

• Double eccentric H.P. Valve -Soft Seated, Fire Safe Seat, Metal Seated ANSI standard from 2 up to 24”, 150,300 pressure class –

Materials: WCB,CF8,CF8M, Others according to ASTM Standard – Wafer and Lug Type - HP.BFL Series

• Rubber lined butterfly valves -from 2” up to DN 48”, ANSI 150 and PN from 6 up 25 pressure class- Materials:Grey and Ductile Iron,

WCB, CF8M, Aluminum Bronze, Aluminum – Wafer and Lug Type - BFL Series

• Control Dampers for Hot Air and Fumes up to 700°C- from DN32 up to DN 1200 diameter, PN 6 up to PN 16 pressure class- Materials:

Grey and Ductile Iron, WCB,CF8M, Others according to ASTM Standard – Double Flanged, Wafer and Lug Type - CD Series

• Check Valves Tilting Disc - Large Diameter Non return and tight shut off valve with counterweight and damper - For water and

gas/steam lines - Ideal application as protection of rotary equipments such pupm, compressors and turbines against reverse flow. As the

pressure drops in a pipeline the check valve begins to close. From DN 500 up to DN 3000, PN 6 up to PN 25 - SCTD Series

• Large Diameter Butterfly Valves for Control ad Regulation of large flow rates with tight shut off in both directions - Sealing ring on the

disc—Double eccentricity - From DN 500 up to DN 3000, Pressure classes from PN 2,5 up to PN 16 - LD Series



Tel: (+39).0331.621009 Fax: (+39).0331.326769


The C.V.B. s.r.l. manufacturing plant is devoted to the production of the Triple Eccentric Zero Leakage Quarter Turn Metal Seated Valves. The

valves can be supplied either manual or motor operated.

Together with the workshop it has been created a dedicated automation center which takes care of all the non bare shaft valves orders.

C.V.B. s.r.l has developed a sub-suppliers network in such a way it is possible to keep under control all the manufacturing steps through a

continuous monitoring and inspecting process.

All the valves, either manufactured inside or outside, are final tested on 100 % basis.

MANUFACTURINGMANUFACTURINGMANUFACTURING PLANTPLANTPLANT

DESIGN DESIGN DESIGN CRITERIACRITERIACRITERIA

Material and Design criteria are in strict accordance with pressure vessel codes. The valve body itself is stronger then the pipe to which is

connected and designed for same working conditions.

The trim, shaft, pins and keys are substantially oversized because are designed with the same allowable stresses of the body.

APPLICABLEAPPLICABLEAPPLICABLE STANDARDSSTANDARDSSTANDARDS

• Design : According to ASME SEC.VIII and IX – ASME SEC.III ANSI B 16.34 – ANSI B31.1B31.3

• Face to Face lenght : According to API 609, BS 5155, ISO 5752 for double flanged

• Body Flange Drilling : According to ANSI B 16.5 for cl. 150 up to cl. 900

According to MSS SP 44 for cl. 150 and cl. 300

According to BS 3293 for cl. 150 and cl. 300

According to UNI-DIN-ISO for cl. PN6 up to cl. PN 160

Inspection and testing: According to API 598 ( resilient seated )

According to API 6 D ( metal seated )

According to ANSI B 16 104 cl. VI leakage

According to MSS – SP 61

Upon Request Special testing

• Marking : According to MSS- SP 25

Leakage Tests According to ANSI B 16.104 - FCI 70 - 2 - 1998 - Specially required for CONTROL VALVES

CLASS MAX. Leakage Rate TEST FLUID PRESSURE TEST

IV 0.01% of max. rated valve capacity Air or water 45 – 60 PSI ( 3—4 bar )

V 0,0005 ml/min/mm.Dn”/bar differential Water 45 – 60 PSI ( 3—4 bar )

VI DN 3’’ 6 bubble/min Air or nitrogen 50 PSI ( 3,5 bar )




VI DN10’’ 11,1 ml/min Air or nitrogen 50 PSI ( 3,5 bar )

VI DN12” 16,0 ml/min Air or nitrogen 50 PSI ( 3,5 bar )



LEAKAGE RATE/MIN ACCORDING TO API 598 - Specially required for ON - OFF / INSULATION VALVES

* API 598 provides the following leak rates and indicate that the metal seated butterfly

Valves can have a leak rate mutually agreed between purchaser and manufacturer.

* API 598 does not require an high pressure closure air test for resilient seated valves. This air test is applied for

metal seated butterfly valves only if requested by purchaser.

METAL SEATED VALVES RESILIENT SEATED VALVES

PRESSURE TEST 110% rating 80% PSI 110% of rating

Liquid Test Gas Test Liquid and Air

DN<=6’’ 12 drops/min 24 air bubbles 0 drops

8’’<DN<12’’ 20 drops/min 40 air bubbles 0 drops

DN>14’’ 28 drops/min 56 air bubbles 0 drops

LEAKAGE TESTS AS PER API 6D specially related to ball, check, gate and plug valves

Air Leakage Test for metal seated butterfly valves only upon Customer request .

Valves tested on both directions.

PRESSURE CLASS HYDRAULIC TEST AIR TEST ADMISSIBLE LEAKAGE RATE

CLASS PSI PSI

150 Lbs 300 80 0

300 Lbs 800 80 0

600 Lbs 1600 80 0

900 Lbs 2400 80 0

SEAT LEAKAGE TEST ACCORDING TO MSS-SP-61

Liquid Seat Test at 110% of the Nominal Valve Pressure.

Pneumatic Seat Test at 80 PSI.

The maximum allowable leakage:10 ml of liquid/hour or3l of gas/inch of nominal diameter/ hour



Tel: (+39).0331.621009 Fax: (+39).0331.326769


QUALIYQUALIYQUALIY ANDANDAND CONFORMITYCONFORMITYCONFORMITY SYSTEMSYSTEMSYSTEM

According to the European Pressure Equipment Directive 97/23/CE as per module H conformity evaluation procedure. Applied Quality

System UNI EN ISO 9001:2000 ( TUV International Certification )

ALLOWABLE ALLOWABLE ALLOWABLE LEAKAGELEAKAGELEAKAGE RATESRATESRATES ACCORDINGACCORDINGACCORDING TOTOTO STANDARDSSTANDARDSSTANDARDS

CCC...VVV...BBB. . . FASTFASTFAST TRACKTRACKTRACK DIVISIONDIVISIONDIVISION

CCC...VVV...BBB. . . SERVICESERVICESERVICE ANDANDAND TRAININGTRAININGTRAINING TEAMTEAMTEAM



Tel: (+39).0331.621009 Fax: (+39).0331.326769


To support in the most effective way Customers Maintenance needs in terms of shortest delivery time of various type of valves to complete

their urgent requests, C.V.B. s.r.l. started to develop a Commercial Division – Fast Track Division – which is able to supply Gate, Globe, Plug

and Ball Valves produced either in cast steel or forged. The C.V.B. Fast Track Division can supply valves made in Bronze as well as in various

alloys.

On request C.V.B. s.r.l. together with their external Experienced Engineers organize customized Training Courses for Maintenance, Technical

and Commercial people.

C.V.B. also has established a Service Team which can provide a professional After Sales supports on the field.

CCC...VVV...BBB. STANDARD ALLOWABLE MATERIALS. STANDARD ALLOWABLE MATERIALS. STANDARD ALLOWABLE MATERIALS

Material Cast Steel Forged Steel

———————— ——————————— ————————————

Carbon Steel ASTM A 216 WCB ASTM A 105

ASTM A 216 WCC ————————- ———————————— —————————————

Low Temperature ASTM A 352 LCB ASTM A 350 LF2

Carbon Steel ASTM A 352 LC1 ASTM A 352 LC2

ASTM A 352 LC3 ASTM A 350 LF3

————————— ———————————— —————————————

ASTM A 217 WC1 ASTM A 182 F1

ASTM A 217 WC4 ASTM A 182 F2

Alloy Steel ASTM A 217 WC5 ASTM A 217 WC6 ASTM A 182 F11

ASTM A 217 C5 ASTM A 182 F5

ASTM A 217 C12 ASTM A 182 F9

ASTM A 182 F6

————————— ———————————— —————————————

ASTM A 351 CF8 ASTM A 182 F304H

ASTM A 351 CF3 ASTM A 182 F304

Stainless Steel ASTM A 351 CF8M ASTM A 182 F316H

ASTM A 351 CF3M ASTM A 182 F316L ASTM A 351 CF8C ASTM A 182 F347H

———————————— ————————————-- ————————————— Austenitic Stainless Steel ASTM A 182 F44

————————————- ————————————— —————————————-

Ferric-Austenitic ASTM A 182 F51

Stainless - Steel

————————————- ————————————— —————————————-

Nickel—Alloy HASTELLOY INCOLOY

————————————- ————————————— —————————————-

Nickel - Copper Alloy MONEL

————————————- ————————————— —————————————--

C.V.B. Valvole Industriali s.a.s.


Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. CERTIFICATIONS. CERTIFICATIONS. CERTIFICATIONS

ATEX CERTIFICATION ATEX CERTIFICATION ATEX CERTIFICATION ISO 9001:2000 CERTIFICATION ISO 9001:2000 CERTIFICATION ISO 9001:2000 CERTIFICATION



Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. . . CERTIFICATIONSCERTIFICATIONSCERTIFICATIONS

PEDPEDPED CERTIFICATION CERTIFICATION CERTIFICATION



Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. . . TESTTESTTEST CERTIFICATES CERTIFICATES CERTIFICATES

FIREFIREFIRE SAFESAFESAFE CERTIFICATE CERTIFICATE CERTIFICATE FIREFIREFIRE SAFESAFESAFE TECHNICALTECHNICALTECHNICAL REPORTREPORTREPORT

C.V.B. srl puo’ realizzare e documentare, attraverso un ente esterno certificato, test secondo le principali normative

internazionali.

A richiesta C.V.B. Effetta life cycle test presso un Laboratorio esterno certificato.



Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. . . PEDPEDPED DECLARATIONDECLARATIONDECLARATION OFOFOF CONFORMITYCONFORMITYCONFORMITY

C.V.B. srl can supply Declaration of Conformity as per Directive 97/23/EC.



Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. . . PARTNERSPARTNERSPARTNERS



Tel: (+39).0331.621009 Fax: (+39).0331.326769


C.V.B. can provide special valves made of various materials and up to 3.000 mm. Diameter.

A Sister Company with larger facility provides the necessary welding and machining sourse for these special valve types.

Through another Sister Company we can also source the necessary overlay work for the seat hard-facing step requested for the triple offset

metal seated valves.

Stellite 6, 12, 21, Tribaloy are the most common hard-facing materials C.V.B. utilize depending from the type of application.

C.V.B. can provide butterfly and metal to metal quater turn valves made of special material such as titanium, aluminum bronze, duplex,

superduplex, hastelloy, and other exotic materials .




Tel: (+39).0331.621009 Fax: (+39).0331.326769



Three Piece Body Ball Valve

Nr Description Materials

1 Wrench Carbon Steel Carbon Steel

2 Nut Carbon Steel Stainless steel

3 Washer Carbon Steel Carbon Steel

4 Gland Carbon Steel Stainless steel

5 Stem A 304 / A 316 A 316

6 Stem seal PTFE PTFE

7 Seat PTFE PTFE

8 Lateral body Carbon Steel A 316

9 Ball A 304 / A 316 A 316

10 Bolt Carbon Steel Carbon Steel

11 Body Carbon Steel A 316

Series 800 PSI – PN 64 Sizes

1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”

B 10 10 15 20 25 32 40 50 65 80 100

H 46 46 53 55 65 70 90 100 195 218 238

L 145 145 145 145 180 180 275 275 380 380 440

S 65 65 65 73 90 98 104 125 190 203 229



Tel: (+39).0331.621009 Fax: (+39).0331.326769



One Piece Body Ball Valve



2 Nut Carbon Steel Stainless steel

3 Washer Carbon Steel Carbon Steel


5 Stem A 304 / A 316 A 316


7 Ball A 304 / A 316 A 316

8 Lateral body Carbon Steel A 316

9 Seat PTFE PTFE

10 Gasket PTFE PTFE


Series 800 PSI – 3000 PSI Sizes

1/4” 3/8” 1/2” ¾” 1” 1 1/4” 1 1/2” 2”

B 10 10 15 20 25 32 40 50

H 45 45 52 55 65 70 93 103

L 145 145 145 145 180 180 275 275

S 65 65 75 90 100 120 135 155



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Ball Valve with B.W. and S.W. connections - Full Bore


1 Body Carbon Steel AISI 316

2 Nipples Carbon Steel AISI 316

3 Seats PTFE PTFE

4 Ball Carbon Steel A 316

5 Stem A 304 / A 316 A 316

6 O-ring PTFE PTFE

7 Gasket PTFE PTFE

8 Pressing Bush Carbon Steel A 316

9 Stop Carbon Steel A 316

10 Disc Springs Spring Steel Spring Steel

11 Nut – Lock Nut Carbon Steel Stainless steel

12 Hand Lever Carbon Steel Carbon Steel

Series 800 LBS – 3000 LBS Sizes

1/4”1/4”1/4”1/4” 3/8”3/8”3/8”3/8” 1/2”1/2”1/2”1/2” 3/4”3/4”3/4”3/4” 1”1”1”1” 1 1/4”1 1/4”1 1/4”1 1/4” 1 1/2”1 1/2”1 1/2”1 1/2” 2”2”2”2” 2 1/2”2 1/2”2 1/2”2 1/2” 3”3”3”3” 4”4”4”4”

DE 10 10 15 20 25 32 40 50 65 80 100

L 67 67 75 90 105 120 135 155 190 205 230

L1 267 267 275 290 305 320 335 355 390 405 430

H 72 72 75 85 95 100 105 115 130 145 200

M 148 148 148 180 180 240 240 280 380 380 470

Z/X 8 / 5 8 / 5 10/5,5 12/7,5 12/7,5 14 / 9 14 / 9 14 / 9 22/14 22/14 30/18



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Threaded Three Way Ball Valve - Full Bore


1 Body Carbon Steel AISI 316

2 Ring Nut Carbon Steel AISI 316

3 Seats PTFE PTFE

4 Ball A 304 / A 316 A 316

5 Stem A 304 / A 316 A 316

6 O-ring PTFE PTFE

7 Gasket PTFE PTFE

8 Pressing Bush A 304 / A 316 A 316


10 Disc Springs Spring Steel Spring Steel

11 Nut – Lock Nut Carbon Steel Stainless steel

12 Hand Lever Carbon Steel Carbon Steel

Series 800 LBS – 1500 LBS Sizes

1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2”

DE 10 10 15 20 25 30 38

L 75 75 90 110 125 135 160

H 70 70 90 93 110 115 120

A 45 45 60 70 80 90 100

B 37,5 37,5 45 55 62,5 67,5 80

M 148 148 180 180 240 240 240

Z/X 10/5,5 10/5,5 12/7,5 12/7,5 14/9 14/9 14/9



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Wafer Body Type Ball Valve - Full Bore



2 Gland Nut Carbon Steel Stainless steel


4 Disk Spring Steel Spring Steel



7 Stem A 304 / A 316 A 316

8 Ball A 304 / A 316 A 316

9 Seat PTFE PTFE

10 Ring Carbon Steel A 316

11 Gasket PTFE PTFE


UNI PN 10 / 16 Sizes

3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”

H 65 75 85 95 100 120 125 140 160 190

D 90 90 100 110 130 140 150 175 190 220

S 36 36 39 43 51 63 83 107 120 152

L 145 145 145 180 180 275 275 380 380 440



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Split Body Type Ball Valve - Full Bore



2 Gland Nut Carbon Steel Stainless steel

3 Stop Carbon Steel Stainless steel

4 Disk spring Spring Steel Spring Steel



7 Stem A 304 / A 316 A 316

8 Ball A 304 / A 316 A 316

9 Seat PTFE PTFE

10 Gasket PTFE PTFE

11 Bolts Carbon Steel Stainless steel

12 Lateral Body Carbon Steel A 316


ANSI 150 - 300 Sizes

1 1/2” 2” 2 1/2” 3” 4” 5” 6” 8” 10” 12” 14”

S 165 178 190 203 229 254 267 292 533 610 686

S11 191 216 241 283 305 381 403 419 566 648 762

H 120 125 140 160 190 240 270 320 370 420 475

L 275 275 380 380 440 500 800 800 800 800 800



Tel: (+39).0331.621009 Fax: (+39).0331.326769


1 For ANSI 300 only


Trunnion Mounted Type Ball Valve - Full Bore


1 Stem A 304 / A 316 A 316



4 Stud Carbon Steel Stainless steel

5 Stem seal Graphoil Graphoil

6 Ball A 304 / A 316 A 316

7 Seat Graphoil Graphoil

8 Seat Ring Carbon Steel Stainless steel

9 Spring Spring Steel Spring Steel

10 Screw Carbon Steel Stainless steel

11 Body Carbon Steel Stainless steel

12 Stem Below A 304 / A 316 A 316

ANSI 600

ANSI 1500

Sizes

4” 6” 8” 10” 12” 14” 16”

S 432 559 660 787 838 889 991

H 230 251 311 325 359 378 397

S 546 705 832 991 1130 1257 1384

H 200 258 335 392 470 492 524

L According to Rating of Valve



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Steel Gate Valve B.B. - Reduced Bore

Class 800 Lbs RB Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 80 90 110 127 127 130

C (Center to Top) 140 166 181 215 251 276

Notes

Also available in classes: 800 lbs Full Bore – 1500 lbs – 2500 lbs – Welded bonnet – Bellow seal – Cryogenic type



Tel: (+39).0331.621009 Fax: (+39).0331.326769


Forged Steel Globe Valve B.B. - Reduced Bore


1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 80 90 110 127 127 130

C (Center to Top) 152 155 181 238 289 290

Notes

Also available in classes: 800 lbs Full Bore – 1500 lbs – 2500 lbs – Welded bonnet – Bellow seal – Cryogenic type


Forged Steel Bellow Seal Globe Valve B.B. - Reduced Bore

Nr Parts Materials

1 Handwheel ASTM A 105 N

2 Stem A 479 TP 410

3 Gland Nut A 194 Gr. 2H

4 Gland Stud AISI 410

5 B / B Bolts A 193 B7

6 Bonnet ASTM A 105 N

7 Body ASTM A 105 N + St 6

8 Spring St. Steel

9 Gland Flange ASTM A 105 N

10 Packing Gland A 479 TP 316

11 Lower Gasket F 316 + Graphite

12 Bellow A 182 F316L

13 Disc A 479 TP 410 + St 6


1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 90 90 110 155 170

C (Center toTop) 140 140 161,5 223 238,5

D (Bore) 12 12 17 26 32

Notes

Valves with integral seats - Also available 800 lbs Full Bore – Welded bonnet



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Steel Check Valve Bolted Cover - Piston, Swing, Ball


1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 80 90 110 127 155 170

C (Center to Top) 49 56 69 73 95 105

Notes

Also available in classes: 800 lbs Full Bore – 1500 lbs – 2500 lbs – Welded bonnet



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Steel Gate Valve B.B. Flanged Rf- Conventional Bore

Class 150 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 108 118 127 165 178

C (Center to Top) 170 195 203 243 262

Class 300 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 140 153 165 191 216

C (Center to Top) 170 195 203 243 262

Notes

Also available in classes: 600 lbs – 1500 lbs – 2500 lbs – Welded bonnet – Bellow seal – From 150 lbs up to 2500 lbs Full Bore



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Steel Globe Valve B.B. Flanged Rf - Reduced Bore

Class 150 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 108 118 127 140 165 203

C (Center to Top) 152 155 181 238 289 290

Class 300 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A

(Face to Face)

152 178 203 216 229 267

C

(Center to Top)

152 155 181 238 289 290

Notes

Also available in classes: 600 lbs – 1500 lbs – 2500 lbs – Welded bonnet – Bellow seal – From 150 lbs up to 2500 lbs Full Bore



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Steel Check Valves Bolted Cover Flanged Rf –Piston, Swing, Ball

Class 150 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 108 118 127 140 165 203

C (Center to Top) 49 56 67 73 95 105

Class 300 Lbs Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2”

A (Face to Face) 152 178 203 216 229 267

A (Face to Face) 1 152 178 216 229 241 267

C (Center to Top) 49 56 67 73 95 105

Notes

Also available in classes: 600 lbs – 1500 lbs – 2500 lbs – Welded bonnet – Bellow seal – From 150 lbs up to 2500 lbs Full Bore 1 ��



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Cast Steel Gate Valves

Part Materials

Body ASTM A 216 WCB ASTM A 351 CF8M

Bonnet Carbon Steel Stainless steel

Flexible wedge 13% Cr. Faced AISI 316

Seat ring 13% Cr. Faced AISI 316

Stem ASTM A 182 F6 AISI 316

Back seat 13% Cr. AISI 316

Bonnet gasket Asbestos free Asbestos free

Stem packing Graphite Graphite

Bolts A 193 B7 A 193 B8

Nuts A 194 2H A 194 Gr. 8

Class 150 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 178 203 229 267 292 330 356 381 406 432 457 508

D 152 191 229 280 343 406 483 533 597 635 699 813

F 16 19 24 25,5 28,5 30,5 32 35 36,5 40 43 48

Class 300 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 216 283 305 403 419 457 502 762 838 914 991 1143

D 165 210 254 318 381 445 521 584 648 711 775 914,5

F 22,5 28,5 32 36,5 41,5 48 51 54 57,5 60,5 63,5 70

Notes

Also available in classes: 600 lbs – 900 lbs – 1500 lbs –



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Cast Steel Globe Valves

Part Materials


Bonnet Carbon Steel Stainless steel

Disc 13% Cr. Faced AISI 316


Stem ASTM A 182 F6 AISI 316

Back seat 13% Cr. AISI 316

Bonnet gasket Asbestos free Asbestos free

Stem packing Graphite Graphite

Bolts A 193 B7 A 193 B8

Nuts A 194 2H A 194 Gr. 8

Class 150 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 203 241 292 406 495 622 699 787 914

D 152 191 229 280 343 406 483 533 597

F 16 19 24 25,5 28,5 30,5 32 35 36,5

Class 300 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 267 318 356 445 559 622 711

D 165 210 254 318 381 445 521

F 22,5 28,5 32 36,5 41,5 48 51

Notes




Tel: (+39).0331.621009 Fax: (+39).0331.326769



Cast Steel Swing Check Valves

Part Materials


Cover Carbon Steel Stainless steel

Disc 13% Cr. Faced AISI 316


Gasket Asbestos free Asbestos free

Bolts A 193 B7 A 193 B8

Nuts A 194 2H A 194 Gr. 8

Class 150 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 203 241 292 406 495 622 699 787 914

D 152 191 229 280 343 406 483 533 597

F 16 19 24 25,5 28,5 30,5 32 35 36,5

Class 300 Lbs Sizes

2” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20” 24”

S 267 318 356 445 559 622 711

D 165 210 254 318 381 445 521

F 22,5 28,5 32 36,5 41,5 48 51

Notes




Tel: (+39).0331.621009 Fax: (+39).0331.326769



Forged Strainers “ Y “ Type

Part Materials

1 Body ASTM A105 ASTMA350LF2 ASTMA182F11 ASTMA182F316

2 Screen AISI 304 AISI 304 orNr

316

AISI 304 or 316 AISI 304 or 316

3 Gasket Stainless Steel +

Graphite

Stainless Steel +

Graphite

Stainless Steel +

Graphite

Stainless Steel +

Graphite

4 Cover Carbon Steel Carbon Steel Carbon Steel Stainless Steel

5 Drain Plug ASTM A182 F304 ASTM A182 F304 ASTM A182 F304 ASTM A182 F316

Sizes

1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 1

S 90 110 130 160 160 160

H 60 75 93 120 120 145

H1 105 140 155 195 195

1 Flanged Cover



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Cast Steel Strainers “ Y “ Type

Nr Part Materials

1 Body ASTM A 216 WCB ASTM A352 LCB ASTM A351 CF8M

2 Screen AISI 304 AISI 304 or 316 AISI 316

3 Cover ASTM A 105 ASTM A350 LF2 ASTM A182 F316

4 Gasket Stainless Steel +

Graphite

Stainless Steel + Graphite Stainless Steel + Graph-

ite

5 Bolts ASTM A192 B7 ASTM A320 L7 ASTM A192 B8

6 Nuts ASTM A 194 2H ASTM A194 Gr.4 ASTM A194 Gr.8

7 Drain Plug ASTM A182 F304 ASTM A182 F304 ASTM A182 F316

Sizes

2” 2 1/2” 3” 4” 6” 8” 10” 12”

S 203 216 241 292 406 495 622 699

ANSI 150 H 205 230 255 300 390 490 550 640

H1 270 360 360 380 570 700 820 1100

S 267 318 356 445 559 622 711

ANSI 300 H 235 285 320 420 480 600 690

H1 270 360 510 670 750 820 1150



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Knife Gate Valves

DN Y N N1 K D H

50 125 4xM16 - 45 155 370

65 145 4xM16 - 45 180 405

80 160 4xM16 - 45 195 435

100 180 4xM16 4xM16 50 215 445

125 210 4xM16 4xM16 50 250 480

150 240 4xM20 4xM20 55 275 535

200 295 4xM20 4xM20 60 335 660

250 350 6xM20 6xM20 60 390 765

300 400 6xM20 6xM20 60 445 880

350 460 10xM20 6xM20 70 505 970

400 515 10xM24 6xM24 90 560 1085

450 565 14xM24 6xM24 110 610 1180

500 620 14xM24 6xM24 110 670 1300

600 725 14xM27 6xM27 110 780 1500

700 840 16xM27 8xM27 110 895 1700

800 950 16xM30 8xM30 110 1010 1900

Dimension table

��

��

��

��!��"��#�� #��



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Appendices

MATERIAL CORRESPONDANCE



Tel: (+39).0331.621009 Fax: (+39).0331.326769


Materials Type Cast Steel Forged Steel

ASTM A216 WCB ASTM A105

Carbon Steel ASTM A216 WCC

ASTM A352 LCB ASTM A350 LF2

Low Temperature ASTM A352 LC1

Carbon Steel ASTM A352 LC2

ASTM A352 LC3 ASTM A350 LF3

ASTM A217 WC1 ASTM A182 F1


ASTM A217 WC5



ASTM A217 C5 ASTM A182 F5

ASTM A217 C12 ASTM A182 F9

ASTM A182 F6

ASTM A351 CF8 ASTM A182 F304

ASTM A351 CF3 ASTM A182 F304L

ASTM A351 CF8M ASTM A182 F316

ASTM A351 CF3M ASTM A182 F316L

ASTM A351 CF8C ASTM A182 F347

ASTM A182 F44

Ferric-Austenitic ASTM A182 F51

Stainless Steel

Nikel-Alloy HASTELLOY®

INCOLOY®

MONEL

Stainless Steel

Austenitic Stainless Steel

Alloy Steel

Nikel-Copper-Alloy


Appendices

Material Characteristics

ASTM A216 A352 A217 A351 A350 A182 A182

Grade / Symbol WCB LCB WC6 CF8M LF2 F11 F316

Carbon C% Max Max Max Max Max Max Max

0,300 0,300 0,200 0,080 0,350 0,300 0,200 0,080

Manganese Mn % Max Max 0,500 Max 0,600 Max 0,300 Max

1,000 1,000 0,800 1,500 1,050 1,350 0,800 2,000

Phosphorus P % Max Max Max Max Max Max Max Max

0,040 0,040 0,040 0,040 0,040 0,035 0,040 0,040

Sulphur S % Max Max Max Max Max Max Max Max

0,045 0,045 0,045 0,040 0,050 0,040 0,040 0,030

Silicon Si % Max Max Max Max Max 0,150 0,500 Max

0,600 0,600 0,600 1,500 0,350 0,300 1,000 1,000

Chromium Cr % Max Max 1,000 18,000 1,000 16,000

0,500 0,500 1,500 21,000 1,500 18,000

Molybdenom Mo % Max Max 0,450 2,000 0,440 2,000

0,200 0,200 0,650 3,000 0,650 3,000

Nikel Ni % Max Max 9,000 10,000

0,500 0,500 12,000 14,000

Copper Cu % Max Max

0,300 0,500

Tensile strength 49,2 45,7 49,2 49,2 49,2 49,2 49,2 52,7

kg/cm 2 min.

Yeld Point 25,3 24,5 28,1 21,1 25,3 25,3 28,1 21,1

kg/cm 2 min.

Elongation min % 22 24 20 30 22 22 20 30

Reduction of area 35 35 35 30 30 30 50

min %

Brinnel Hardness ı 187 143

207

A105



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Appendices

VALVE MATERIALS



Tel: (+39).0331.621009 Fax: (+39).0331.326769


SERIE PIANE A COLLARINO CIECHE

PN6 UNI EN 1092-1 PN 6 (EX UNI 2276) UNI EN 1092-1 PN 6 (EX UNI 2280) UNI EN 1092-1 PN 6 (EX UNI 6091)






Appendices

UNI EN FORGED FLANGES

CLASSE SLIP ON WELDING NECK BLIND FLANGE

150# SO 150# WN 150# BF 150#

300# SO 300# WN 300# BF 300#

400# SO 400# WN 400# BF 400#

600# SO 600# WN 600# BF 600#

900# SO 900# WN 900# BF 900#

1500# SO 1500# WN 1500# BF 1500#

2500# SO 2500# WN 2500# BF 2500#

ANSI B 16.5 FORGED FLANGES



Tel: (+39).0331.621009 Fax: (+39).0331.326769


Flanges UNI Sizes

Ø 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" 10" 12"

DN 10 15 20 25 32 40 50 65 80 100 125 150 200 250 300

Flange diameter 90 95 105 115 140 150 165 185 200 220 250 285 340 395 445

Holes center line 60 65 75 85 100 110 125 145 160 180 210 240 295 350 400

Holes number 4 4 4 4 4 4 4 4 4 8 8 8 8 12 12

Holes diameter 14 14 14 14 18 18 18 18 18 18 18 22 22 22 22

Flange diameter 90 95 105 115 140 150 165 185 200 220 250 285 340 405 460


Holes number 4 4 4 4 4 4 4 4 8 8 8 8 12 12 12

Holes diameter 14 14 14 14 18 18 18 18 18 18 18 22 22 25 25

Flange diameter 90 95 105 115 140 150 165 185 200 235 270 300 360 425 485


Holes number 4 4 4 4 4 4 4 8 8 8 8 8 12 12 16

Holes diameter 14 14 14 14 18 18 18 18 18 22 25 25 25 30 30

Flange diameter 90 95 105 115 140 150 165 185 200 235 270 300 375 450 515


Holes number 4 4 4 4 4 4 4 8 8 8 8 8 12 12 16

Holes diameter 14 14 14 14 18 18 18 18 18 22 25 25 30 33 33

Flange diameter 100 105 130 140 155 170 180 205 215 250 295 345 413 470 530


Holes number 4 4 4 4 4 4 4 8 8 8 8 8 12 12 16

Holes diameter 14 14 18 18 22 22 22 22 22 25 30 33 36 36 36

Flange diameter 100 105 130 140 155 170 195 220 230 265 315 355 430 505 585


Holes number 4 4 4 4 4 4 4 8 8 8 8 12 12 12 16

Holes diameter 14 14 18 18 22 22 25 25 25 30 33 33 36 39 42

Flange diameter 100 105 130 140 155 170 195 220 230 265 315 355 430 505 585


Holes number 4 4 4 4 4 4 4 8 8 8 8 12 12 12 16

Holes diameter 14 14 18 18 22 22 25 25 25 30 33 33 36 42 42

Dri

llin

g

PN

10

Dri

llin

gD

rill

ing

PN

16

PN

25

Dri

llin

gD

rill

ing

Dri

llin

gD

rill

ing

PN

40

PN

64

PN

10

0P

N 1

60


Appendices

UNI EN 1092 PIANE FORGED FLANGES



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Appendices

ANSI B 16.5 FORGED FLANGES SLIP ON

Flanges ANSI B 16.5 Sizes

Ø 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4" 5" 6" 8" 10" 12"

DN 15 20 25 32 40 50 65 80 100 125 150 200 250 300

Flange diameter 88,9 98,5 108,0 117,3 127,0 152,4 177,8 190,5 228,6 254,0 279,4 342,9 406,4 482,6

Holes center line 60,5 69,9 79,3 88,9 98,5 120,7 139,7 152,4 190,5 215,9 241,3 298,5 362,0 431,8

Holes number 4 4 4 4 4 4 4 4 8 8 8 8 12 12

Holes diameter 16 16 16 16 16 19 19 19 19 22 22 22 25 25

Flange diameter 95,3 117,3 124,0 133,4 155,5 165,1 190,5 209,5 254,0 279,4 317,5 381,0 444,5 520,7


Holes number 4 4 4 4 4 8 8 8 8 8 12 12 16 16

Holes diameter 16 19 19 19 22 19 22 22 22 22 22 25 29 32

Flange diameter 95,3 117,3 124,0 133,4 155,5 165,1 190,5 209,5 254,0 279,4 37,5 381,0 444,5 520,7


Holes number 4 4 4 4 4 8 8 8 8 8 12 12 16 16

Holes diameter 16 19 19 19 22 19 22 22 25 25 25 29 32 35

Flange diameter 95,3 117,3 124,0 133,4 155,5 165,1 190,5 209,5 273,0 330,2 355,6 419,1 508,0 558,8


Holes number 4 4 4 4 4 8 8 8 8 8 12 12 16 20

Holes diameter 16 19 19 19 22 19 22 22 25 29 29 32 35 35

Flange diameter 120,7 130,0 149,4 158,8 177,8 215,9 244,4 241,3 292,1 349,2 381,0 469,9 546,1 609,6


Holes number 4 4 4 4 4 8 8 8 8 8 12 12 16 20

Holes diameter 22 22 25 25 29 25 29 25 32 35 32 38 38 38

Ser

ie 6

00

Ser

ie 9

00

Dri

llin

gD

rill

ing

Dri

llin

g

Ser

ie 1

50

Dri

llin

gD

rill

ing

Ser

ie 3

00

Ser

ie 4

00



Tel: (+39).0331.621009 Fax: (+39).0331.326769



Appendices

METRIC EQUIVALENTS



Tel: (+39).0331.621009 Fax: (+39).0331.326769


CCC...VVV...BBB. SRL REFERENCE LIST. SRL REFERENCE LIST. SRL REFERENCE LIST



Tel: (+39).0331.621009 Fax: (+39).0331.326769




Tel: (+39).0331.621009 Fax: (+39).0331.326769


c. v.b. srl valvole industriali - fast · pdf filec. v.b. srl valvole industriali - fast track...

Documents