brochure hrl a4 4seiter eng ansicht
TRANSCRIPT
-
7/28/2019 Brochure HRL A4 4Seiter ENG Ansicht
1/4
Energy-eicient production o quality chips
Drum Chipper HRL
The MAIER Drum Chipper HRL is a high-perormance machine or the
production o high-quality chips or the PB-, MDF- and OSB-plants, as
well as or the biomass, pelletizing, WPC/WFC industry and many other
applications. As the core machine or the wood yard MAIER Drum Chip-
pers eectively process round wood, log ends, slabs and ocuts, veneer
residues or waste wood.
Free choice o wood assortment
Optimal chip quality
Chip length o 4180 mm
Energy-ecient size-reduction
Capacity o 5140 t bd./h
Individual turn-key solutions or
chipping lines incl. tailor-made
conveyor systems
Tried and trusted worldwide
Advanced and reliable technology
Broad application spectrum
Low-maintenance and service-riendly
High machine availability
Feeding o the material to the drum chipper
is eected by means o a eeding belt or a
vibration conveyor. The material is seized by
specially toothed ineed rollers and continu-
ously ed to the chipping rotor. The knives
o the rotor cut the material to the required
chip length. To avoid oversizes the chipped
material passes through an individually ad-
apted reractioning grid and is discharged
rom the machine by a screw, trough-chain
or belt conveyor.
Depending on the individual requirements,
the chippers can be equipped with variouseatures.
Your benefits
-
7/28/2019 Brochure HRL A4 4Seiter ENG Ansicht
2/4
Drum Chipper HRL
Features
Infeed system Specially adapted ast rotating clearing roller to avoid
damages o the eeding belt
Ineed rollers with aggressive shaped teeth or optimal material eeding;
narrow running gaps prevent clogging o material
Ineed rollers in segmented design to reduce maintenance time (optional)
Lateral swing side wall sealing with patented push arm or clean operation o the chipper
Chipping rotor
Patented slewable knie clamping plate or quick and easy knie replacement
Exchangeable thread bushes to ensure proper clamping o chipping knives
Regrindable wear plates under the chipping knives
Wear-protection o the chip-pocket edge
Extra heavy-duty execution to increase the rotational energy to avoid current peaks
Rotor brake to minimize the braking period
Machine casing
Counter knie, screw-astened, regrindable, once turnable, hydraulically moveable
Reractioning grid in welded execution and/or as perorated plate, made o
wear-resistant special steel, in divided execution or easy exchange, adapted to input
and required output material
Slewable crane or disassembly o the reractioning grid and liting o chipper knives to
the maintenance platorm (optional)
Specially damped base rame or the reduction o structure-borne noise transmission
-
7/28/2019 Brochure HRL A4 4Seiter ENG Ansicht
3/4
Drum Chipper HRL
Innovations
Maxi-chips production with HRL-OSBThe Drum Chipper type HRL-OSB is designed or the production o chips with length up
to 180 mm. This chipper orms the irst process step o the 2-stage OSB system developed
and patented by MAIER. In the second step, these maxi chips are cut to strands or the
production o OSB by the MAIER Strand Flaker MSF.
Among others, maxi chips can be used directly e.g. or the production o charcoal.
Special machine design
Chip length up to 180 mm
Utilisation o raw materials previously considered to be unavailable or OSB production
Micro-chips production with HRL-M
The special Drum Chipper type HRL-M with modiied rotor design is used or the produc-
tion o very small micro-chips, e.g. or pelletizing and WPC/WFC industry, as well as or
smokehouses.
Special rotor design
Processing o variable wood assortments
Continuous production o micro-chips with length 4 mm possible
Tight particle size distribution
The Drum Chipper type HRL-B is specially
designed or the processing o variable input
materials, rom green waste up to round
wood, into chips or biomass power plants or
the pelletizing industry.
Tried and trusted technology based on the
high requirements o the panel board industry
Robust, reliable, eicient
Large inlet cross-section
Optimal material eeding with proven
ineed-roller system
0%
5%
10%
15%
20%
25%
30%
35%
40%
45%
2
>4
>6
>8
>10
>12
>14
Chip length [mm]Biomass production with HRL-B
1st Stage
MAIER Drum Chipper HRL-OSB
2nd StageMAIER Strand Flaker MSF
-
7/28/2019 Brochure HRL A4 4Seiter ENG Ansicht
4/4
April2013
B. MAIER Zerkleinerungstechnik GmbH
Dieenbacher Group
Schweriner Strae 1
33605 Bieleeld (Germany)
Tel +49 521-584943-20
Fax +49 521-584943-21
www.maier-dieenbacher.de
Please contact us or urther inormation:
This product inormation is based on our experience and our current state o knowledge. All data contained herein are or general orientation only, non-binding and may not be valid or all sorts oapplications. Since the unction and the perormance o our products also depend on the individual actors o the intended use, we recommend discussing specic applications with our technicaladvisory service. Due to our continuous product optimization we reserve the right to change our products and this product inormation at any time without prior notice. B. MAIER Zerkleinerungstechnik GmbH, Bieleeld. All rights reserved.
Subject to technical modications. IR = ineed roller1) Intermediate sizes on request2) Reerring to round wood with a density o 450 kg bd./m3, a 1113% lling ratio o the ineed, and a chip length o 40 mm.3) Chip volume fow reerring to a bulk weight o 150 kg/m3.4) Dimensions o complete machine exc lusive o main motor.
The Maier Drum Chippers can be equipped
with single or tandem drive. Depending on
the installed drive power and the electric
power supply dierent start-up concepts
can be realized.
Direct start-up via star-delta switch
Start-up via sot starter or requency
converter to avoid current peaks
Start-up via hydraulic starting unit to
avoid current peaks
(Uncoupling o the hydraulic motor via
clutch ater start-up possible)
Drive concepts for thedrum chipper
Technical Data
Drum Chipper HRL
Solid wood
1 m = 1 m
Single drive Double driveSingle drive
with
hydraulic cluth
Slabs & ocuts
1 rm = 0,60 m
Round wood
1 rm = 0,75 m