Brian Scott MarshPO Box 187

2274 North Co Rd 61Hartford, Alabama 36344Hisinspirations@aol.com

(334)248-2075 CellDOB: 12/13/1965

ObjectiveA Challenging Career that provides a constant learning experience as well as a secure future.

Skills* FAA Airman Certificate - Airframe & Powerplant Ratings (AP2778318)*Read and follow Blueprints, Ad’s or any other type technical materials.*Level II NDT / NDI Inspection ET, UT, LPI With required OJT and Classroom Training documents. Trained to NAS410 standards.* NDT Instruments used: USM 35, USN 50, Zetect Miz, Nortec 2000, Phasic 3d, UniWest Pro, and Olympus 1200, Epoch 600, to name a few. *Work without supervision

Employment

Commercial Jet Advanced MRO Solutions100 Jet Services WayDothan, Al 36303May 2014 – Present

Quality Control Inspector with primary responsibilities as company level II NDT Inspector. Responsible for all aspects of NDT related duties to include tooling and equipment. Accomplish any and all NDT related inspections to include AD/SB inspections in ET, UT, and FPI methods.

Flightstar Aircraft ServicesFlight Line DriveJacksonville, Fl. 32222April 2012 – April 2014

Quality Control Supervisor – Level II NDTResponsible for all aspects of the quality department from primary and secondary inspections, to managing the quality department work flow of twenty plus lines of maintenance at any given time. Accomplished NDT inspections as required and directed lower level inspectors as needed to complete daily inspection departmental goals. Major carriers included Delta, SouthWest, and FedEx to name but a few.I resigned this position due to my father’s poor health. He passed away a short time after leaving this great company.

Pemco World Air Services - November 18, 1996 – April 2012100 Pemco Dr.Dothan, Al. 36303(334)983-4571

**Dothan Alabama Plant closed and the company does not plan to reopen the Dothan facility.

I have been employed with Pemco for some 16 years. My experience involves light to heavy maintenance checks as well as passenger to freighter conversions. I have spent the last 8 years as an Aircraft / NDT / NDI / Inspector often working alone to accomplish any related inspection work. From June 2011 through November 2011, I was the sole NDT Inspector at our Cincinnati (CVG) facility. Accomplishing Primary and Secondary inspections as required while this facility was being approved for its own 145 Repair Station License with NDT capabilities. During this time, I traveled as required, maintained communication Dothan Director of Quality as required, directed the flow and completion of inspections.Prior to inspection, I worked as an Aircraft Mechanic Lead for 5 years. Directed flow of aircraft maintenance, rigged cable systems, general maintenance and preventive maintenance, trouble shooting of flight controls and other aircraft systems and their required components. I have heavy maintenance experience on Boeing 727, 737-300,400, and New Generation aircraft, 757-200, 767, McDonnell Douglas DC8, DC9, DC10, MD80, Airbus A300, A319 & A320 series aircraft. Also worked CRJ series aircraft to include heavy NDT inspections of these aircraft.

While at Pemco, I’ve received training classes given by Pemco, America West, Airtran, Northwest, Delta, Southwest, SkyWest, ASA, to name but a few. I have 40 hour general familiarization on DC9, DC10, 737-300-400 to include 80 hour systems training for New Generation aircraft, Airbus A319 - A320. L382 (C130)For my first 3 years at Pemco, I worked as structural mechanic, accomplishing structural sheet metal repairs as required. To include cargo conversions, skin replacements/repairs, frame replacements/repairs, ect…

Education

Geneva County High School - Hartford, Al.Aviation Education Consultants - Ozark, Al.

Military Service

Alabama Army NG131st Armor1984-1992Honorable Discharge with 8 years service.

References

References upon request

Comments

Thank you for your time and consideration.