bottom rail angle bracket installation...bracket and rail installed bottom rail witness line witness...

Post Sleeve Post Sleeve 2" Space 3/8" to Center of Hole Pre Drill 3/16" Hole 2. Cut Bottom Rail at Angle and Install Bracket on Rail • Cut Bottom Rail at angle needed for bottom rail installation. • Place bottom rail bracket on underside of bottom rail. • Align side of keyhole with center “witness” line Screw hole will be offset from center “witness” line (see above). 4. Transfer Bracket Screw Location • Measure to keyhole location marked on post sleeve. • Transfer measurement to keyhole location to measurement taken in Step 1 • Drill a 3/16" hole where measurement marks meet. • Install #14 x 2" screw to within 1/8" of mounting surface. • Check screw head clearance using a bottom bracket and adjust clearance between screw head and post/mounting surface to obtain a snap in fit. Post Sleeve Post Sleeve Witness Line Offset Screw Position Post Sleeve (bottom view) Bottom Rail Bracket and Rail Installed Bottom Rail Witness Line Witness Line Equal Distance 1. Measure for Bottom Rail Bracket Screw Determine distance from deck surface to bottom of rail. Add 3/8" and lightly mark this dimension across post. 3. Mark Bottom Bracket Screw Location on Post • At a comfortable height to work place cut bottom rail against post. • Measure from rail to side of post sleeve on either side of cut bottom rail to position cut bottom rail on center of post sleeve. • While holding cut bottom rail against post sleeve, reach under rail and mark keyhole location on post sleeve. Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by the installer. It is the installer’s responsibility to secure proper building permits, review local codes and safety needs and meet or exceed them. The instructions provided by Fairway are a guide and may not account for every special circumstance. The installer must indentify and execute the installation approach that is appropriate for every application. CP310 BOTTOM RAIL ANGLE BRACKET INSTALLATION ™ BY ™ EnvisionOutdoorLiving.com 1-800-598-5245 © 2021 FAIRWAY ARCHITECTURAL RAILING SOLUTIONS

Upload: others

Post on 21-Aug-2021

2 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: BOTTOM RAIL ANGLE BRACKET INSTALLATION...Bracket and Rail Installed Bottom Rail Witness Line Witness Line Equal Distance 1. Measure for Bottom Rail Bracket Screw Determine distance

PostSleeve

2" Space

3/8" to Center of HolePre Drill 3/16" Hole

2. Cut Bottom Rail at Angle and Install Bracket on Rail• Cut Bottom Rail at angle needed for bottom rail installation.

• Place bottom rail bracket on underside of bottom rail.

• Align side of keyhole with center “witness” lineScrew hole will be offset from center “witness” line (see above).

4. Transfer Bracket Screw Location• Measure to keyhole location marked on post sleeve.

• Transfer measurement to keyhole location tomeasurement taken in Step 1

• Drill a 3/16" hole where measurement marks meet.

• Install #14 x 2" screw to within 1/8" of mounting surface.

• Check screw head clearance using a bottom bracket and adjust clearancebetween screw head and post/mounting surface to obtain a snap in fit.

Post

Sle

eve

Post

Sle

eve

Witness Line

Offset Screw Position

Post

Sle

eve

(bottom view)

Bottom RailBracket and Rail Installed

Bottom Rail

Witness Line

WitnessLine

EqualDistance

1. Measure for Bottom Rail Bracket ScrewDetermine distance from deck surface to bottom of rail.Add 3/8" and lightly mark this dimension across post.

3. Mark Bottom Bracket Screw Location on Post• At a comfortable height to work place cut bottom rail against post.

• Measure from rail to side of post sleeve on either side of cut bottom rail toposition cut bottom rail on center of post sleeve.

• While holding cut bottom rail against post sleeve, reach under rail andmark keyhole location on post sleeve.

Fairway Architectural Railing Solutions will not be held liable for incorrect or unsafe installations by the installer. It is the installer’s responsibility to secure proper building permits, review local codes and safety needs and meet or exceed them. The instructions provided by Fairway are a guide and may not account for every special circumstance. The installer must indentify and execute the installation approach that is appropriate for every application.

CP310

BOTTOM RAIL ANGLE BRACKET INSTALLATION™

BY ™

Ultra Torque / Power Torque bottom bracket cup

WINDLOAD POST - Wayne Dalton Bracket Installation Locate the bottom bracket assembly and align it to the bottom of the post. Secure the bottom bracket to the bottom of the windload

Ready-To-Assemble VersaRail - Freedom · 2 Bracket Balusters Bottom Rail Locking Strip Base Mount Base Trim Center Support Post Post Top Top Rail Pro˜ le Top Rail Locking Strip BEFORE

including Top-Down/Bottom-Up...bottom rail handle and push up slowly. Always keep the bottom rail level. Top-Down Bottom-Up Cordless Shades To raise and lower the shade from the bottom,

CRANKSET / BOTTOM BRACKET COMPATIBILITY CHART - ROAD

Elevator rail bracket improvement project

Place Measuring Tape at BOTTOM of Upper Rail and Measure Downward Towards the Bottom Rail

Aqua Tub Door & EX/RT Panel - dreamline.com4. Take apart the Bottom bracket (14). Place the Bottom bracket base into the notch on the bottom of the Stationary glass (02) from inside

COMPATIBLE WITH ALL BOTTOM BRACKET …rotorbike.com/wp-content/uploads/2017/03/ROTOR-BB-Crank...COMPATIBLE WITH ALL BOTTOM BRACKET STANDARDS W =68 mm BB30 F-Si Ai Cannondale INPOWER