boq of civil work for the proposed ... fabrication and supply of angle iron or t iron door/window...

BOQ OF CIVIL WORK

S.N. DESCRIPTION OF ITEM OF WORKTOTAL

QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10

1 EXCAVATION in foundation in ordinary Soil ( Loam clay or sand )including lift upto 1.5m lead upto 30.0 m & including filling watering andramming of excavated earth into the space between the building & sides offoundation trenches or into the plinth and removal & disposal surplus earthas directed by the engineer I/C within a lead of 30 m.from foundationtrenches. 1070.64 CUM. 62.70 67129.13

2 Filling of available excavated earth in trenches, plinth, sides of foundationetc. inlayers not exceeding 20 cms in depth, consolidating each deposited layerby ramming and watering including lead upto 50m & lift upto 1.50m.

1070.64 CUM. 38.00 40684.32

3 Filling BY CARTED earth in trenches, plinth, sides of foundation etc.inlayers not exceeding 20 cms in depth, consolidating each deposited layer byramming and watering including lead upto 50m & lift upto 1.50m.

947.17 CUM. 308.75 292438.74

4 Sand filling in plinth including supply of necessary quantity of sand from adistance not exceeding 8.00Kms. From the site of work including watering,dressing etc. labour & T &P etc. required for proper completion of worksaplings of girth upto 30 ground level and removal of rubbish upto a distsnceof 50m out side the periphery of area cleared. under floor fine sand.

187.31 CUM. 513.00 96090.03

BOQ OF CIVIL WORK FOR THE PROPOSED CONSTRUCTIONDEGREE COLLEGE (MAIN BUILDING, BOYS & GIRLS HOSTEL)

AT BALRAMPUR U.P.

4 Sand filling in plinth including supply of necessary quantity of sand from adistance not exceeding 8.00Kms. From the site of work including watering,dressing etc. labour & T &P etc. required for proper completion of worksaplings of girth upto 30 ground level and removal of rubbish upto a distsnceof 50m out side the periphery of area cleared. under floor fine sand.

187.31 CUM. 513.00 96090.03

5 Providing and laying Cement concrete 1:4:8 (1cement :4 C. sand :8 gradedstone ballast 40 mm. nominal size) including supply of all materials, labourand T&P etc. required for proper completion of the work and curing complete,also including cost of formwork in foundation.

224.85 CUM. 4085.00 918512.25

6 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in RCC raft foundation andfooting, excluding its fixing and binding wire and including necessarycentering and shuttering etc and also including S/o all materials required forproper completion of the work. Binding wire to be supplied by the contractorfree of cost. 361.26 CUM. 5700.00 2059182.00

7 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in COLUMN, excluding its fixingand binding wire and including necessary centering and shuttering etc and alsoincluding S/o all materials required for proper completion of the work.Binding wire to be supplied by the contractor free of cost.

208.40 CUM. 7125.00 1484850.00

(Satnan)

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10Asst. Account Officer

8 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 , excluding its fixing and bindingwire and including necessary centering and shuttering etc and also includingS/o all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. But in plinth beams in 1:1.5:3 i.e.having spans upto 6 metres. 66.22 CUM. 7125.00 471817.50

9 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in lintels of doors and windows,excluding its fixing and binding wire and including necessary centering andshuttering etc and also including S/o all materials required for propercompletion of the work. Binding wire to be supplied by the contractor free ofcost. 68.80 CUM. 6460.00 444448.00

10 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in , excluding its fixing and bindingwire and including necessary centering and shuttering etc and also includingS/o all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. But in slab

541.68 CUM. 6650.00 3602172.00

11 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in , excluding its fixing and bindingwire and including necessary centering and shuttering etc and also includingS/o all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. But in HAVIER beams havingspans upto 6 metres. 315.15 CUM. 7410.00 2335261.50

11 R.C.C. work with cement approved coarse sand and 2cm Gauge approvedstone ballast in the proportion of 1:1.5:3 in , excluding its fixing and bindingwire and including necessary centering and shuttering etc and also includingS/o all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. But in HAVIER beams havingspans upto 6 metres. 315.15 CUM. 7410.00 2335261.50

12 Class-150 brick work in 1:6 cement and COARSE sand mortar in foundationand plinth including supply of all materials, labour tools and plants, etc.Required for proper completetion of the work. 517.79 CUM. 3562.50 1844626.88

13 Class-150 brick work in 1:6 cement and COARSE sand mortar inSUPERSTRUCTURE including supply of all materials, labour tools andplants, etc. Required for proper completetion of the work

G.F. 265.69 CUM. 3890.25 1033600.52

F.F. 239.87 CUM. 3890.25 933154.27

S.F. 194.06 CUM. 3929.15 762491.33

T.F. 134.33 CUM. 3968.06 533028.83

MUMTY 65.19 CUM. 4006.96 261213.56

14 Class-150 HALF brick work in 1:3 cement and COARSE sand mortar inSUPERSTRUCTURE including supply of all materials, labour tools andplants, etc. Required for proper completetion of the work.

G.F. 137.01 CUM. 4336.75 594178.12

F.F. 133.39 CUM. 4336.75 578479.08

S.F. 52.44 CUM. 4380.12 229693.36

T.F. 37.38 CUM. 4423.49 165349.87

MUMTY 0.00 CUM. 4466.85 0.00

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10 (Satnan)Asst. Account Officer

15 Painting on D.P.C. With one coats of airblown bitumen 85/50 or 85/25 @1kg/sq.m approx. Including cost of fuel if any. 177.56 S.Q.M. 103.31 18344.17

16 25 mm thick damp proof course with cement with approoved coarse sand1:2:4 any including water proofing materials as ordered by the engineer-in-charge in the proportion as specification by the manufacture including supplyof all material, labour and tools and plants etc. required for proportioncompletion of the work including proper curing and shuttering as necessary.

177.56 S.Q.M. 237.50 42170.50

17 Providing and injecting chemical emulsion for preconstructional antitermitetreatment and creating a chemical barrier under and alround the coloumnpitswall tench basement excavation top surface if plinth filling junction of walland floor along the external perimer of binding expansion joints,surroundingof pipes and conduits etc.complete(plinth area of the building at ground flooronly shall be measured as per I.S.6313(Part ll 1981) aldrine emulsifiableconcrete or any other approved material such as hepthachlor or chlordancewill be used.The rate of application of chemical emulsion shall be as follows:-(1) treatment for masonary & foundation 5 litres per sq.m. (2) back fill inimmediate contract with foundation 7.5 litre per sq.m (3)treatment of topsurface of plinth filling 5 liters per sq.m. (4) treatment of soil along externalparameter of building 7.50 lire per sq.m.

1384.37 S.Q.M. 228.00 315636.36

18 Mild steel or iron in plain work such as in reinforced concreted or reinforcedbrick work (when not included in overall rates) wrought to required shape asnecessary including bending for proper completion of the work and includingsupply of steel its wastage. Bend hooks and authorized overlapping shall bemeasured. 2453.00 qui 6175.00 ##########

18 Mild steel or iron in plain work such as in reinforced concreted or reinforcedbrick work (when not included in overall rates) wrought to required shape asnecessary including bending for proper completion of the work and includingsupply of steel its wastage. Bend hooks and authorized overlapping shall bemeasured. 2453.00 qui 6175.00 ##########

19 Providing and fixing SS sliding door bolts ISI marked anodised transparent ordyed to required colour or shade with nuts and screws etc. complete : 250x16mm. 177.00 Nos 237.50 42037.50

20 Providing and fixing SS tower bolts ISI marked anodised transparent or dyedto required colour or shade with necessary screws etc. complete : 250x10 mm.

859.00 Nos. 118.75 102006.25

21 Providing and fixing SS handles ISI marked anodised transparent or dyed torequired colour or shade with necessary screws etc. complete :125 mm.

859.00 Nos. 90.25 77524.75

22 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mmangle iron and 3 mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approvedsteel primerUsing M.S. angels 40x40x6 mm for diagonal braces

129.00 SQM 2794.90 360542.10

23 Supply and fixing of flush Doors commercial quality conforming to I.S. 2202Part 1 (1983) including fixing of wooden cleats and stoppers and includingfixing and adjustment of hinges bolts locks handles springs fitting withnecessary screws to be supplied

32 mm thick for double leaf shutters 55.54 SQM 2207.37 122597.47

32 mm thick single leaves 281.21 SQM 2207.37 620735.22

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10 (Satnan)Asst. Account Officer

1 Fabrication and supply of Angle Iron or T iron door/window chaukhat frame,record racks etc. including cost of steel all carriage, welding, cutting, labour,grinding, smooth finishing, staple plate 6mm thick welded in back flange ofhinges, cost of 14 gauge hinges for 100mm. & 75mm.and 16 gauge hingesthreading, all screws, nuts, bolts, arrangement for locking, tower bolts, tie rod,hold fasts etc. Complete job and including applying of one coat completion ofwork as per direction of Engineer in charge.

2635.50 KG 77.85 205173.6824 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and

cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S.Sheet, joints mitred, welded and grinded finish, with profiles of required size,including fixing of necessary butt hinges and screws and applying a primingcoat of approved steel primer Fixing with 15x3 mm lugs 10 cm longembedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 20 mm nominal size)

16991.36 KG 126.97 2157350.50

25 Providing & fixing glass panes with putty and glazing clips in steel doors,windows, clerestory windows, all complete with 3.7 MM 530.98 SQM 691.32 367074.44

26 Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete.

26 Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc. including priming coat withapproved steel primer all complete.

Fixed to steel windows by welding 7964.70 KG 97.99 780480.86

27 Providing and fixing stainless steel (Grade 304) railing made of hallow tubes,chanells, plates etc. including welding grinding buffing, polising and makingcorvechare (wherever required) and fitting the same with necessary stainlesssteel nuts and bolts complete, i/c fixing railing with necessary accessories andstainless steel dash fasteners, stainless steel bolts etc. of required size on thetop of the floor or the side of waist slab with suitable arrangement as perapproval of Engineer in charge.(for payment purpose only weight of stainlesssteel members shall be considered excluding fixing assessories such as nuts,bolts, fasteners etc.

2084.55 K.G. 580.55 1210175.08

28 Providing and laying "brick coba" 12 mm thick laid with M-150 class brick batcoba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base ofcement mortar 1:4 cement and coarse sand mixed with water proofingcompound spreading cement slurry mixed with aerelic cement concrete waterproofing compound filled gaps of coba & top of coba mortar mixed withwater proofing compound in 1:4 cement and coarse sand mortar finfishedsmooth & top mashed false square 30 x 30 cm and side wall parapet shall bemonotythic plaster wall upto 30 cm higher and junction and corner shall berounded by brick ballast cement and coarse sand masonary coba with topfinished plaster mixed with acetic water proofing compound @ 2% by weight& including S/o all material, labour, T&P etc complete for proper completionof work.

1384.37 SQM. 807.50 1117878.78

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 1029 12 mm cement plaster in single coat on fair side of single or half brick wall for

single or half brick wall for interior plastering upto floor two level includingbrick wall for interior plastering upto floor two level including internalrounded angles chamfers and/or rounded angles not exceeding 80mm in girthand finished evenand smooth no. extra for mixing and additive. (iii) 1cement:6 C. sand 7778.59 SQM. 135.14 1051179.21

(Satnan)Asst. Account Officer

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10

30 15 mm cement plaster in single coat on rough side of single or half brick wallfor interior plastering upto floor two level including internal rounded anglesnot exceeding 80mm in girth and finished even and smooth (i) 1 cement: (iii)1 cement: 6 C. sand 6599.21 SQM. 156.51 1032858.86

31 12 mm cement plaster in single coat on fair side of single or half brick wall forsingle or half brick wall for interior plastering upto floor two level includingbrick wall for interior plastering upto floor two level including internalrounded angles chamfers and/or rounded angles not exceeding 80mm in girthand finished evenand smooth no. extra for mixing and additive. (i) 1 cement: 3course sand in ceiling. 4010.89 SQM. 151.05 605844.93

32 15 mm cement plaster in 1:4 (1 cement : 4 coarse sand) finished rough withsponge. 426.66 SQM. 169.67 72391.40

33 Making grooves 10 to 12 mm wide x 8 mm deep in plaster the all or in ceilingvertically of horizontally as required. 10052.60 R.M. 10.93 109824.66

34 Making drip course in sunshade or FACIA as per direction of Engineer-in-charge including supply of all materials labour etc. required proper completionof work. 444.20 R.M. 26.46 11752.42

35 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming toIS : 15622, of approved make, in all colours, shades, except White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1Cement : 4 Coarse sand), including pointing the joints with white cement andmatching pigments etc., complete. 285.14 SQM. 792.35 225929.97

35 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer), of 1st quality conforming toIS : 15622, of approved make, in all colours, shades, except White, Ivory,Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1Cement : 4 Coarse sand), including pointing the joints with white cement andmatching pigments etc., complete. 285.14 SQM. 792.35 225929.97

36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, inall colours, shades except burgundy, bottle green, black of any size asapproved by Engineer-in-Charge, in skirting, risers of steps and dados, over12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) jointingwith grey cement slurry @ 3.3kg per sqm, including pointing in white cementmixed with pigment of matching shade complet

1269.12 SQM. 753.92 956814.95

37 Providing and laying vitrified floor tiles Kajaria KERRO brand or Equivalentbrand of super quality in different size (Thickness specified by manufacturer)with water absorption make in all colors and shade laid on 20 mm thickcement mortar 1:4 (1 cement : 4 coarse sand ) including grouting the joint withwhite cement and matching pigments etc. complete ( Size of Tile 600 x 600mm) 2675.00 SQM. 1332.42 3564232.85

38 Kota stone slab flooring over 20 mm (average) thick base laid over and jointedwith grey cement slurry mixed with pigment to match the shade of the slab,including rubbing and polishing complete with base of cement mortar 1 : 4 (1cement : 4 coarse sand 743.48 SQM. 1018.12 756944.07


BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10

39 Providng and fixing Granite 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen plateforms, vanitycounters, windows sills, facias and similar locations of required size, approvedshade, colour and texture laid over 20mm thick base cement mortar 1:4(1cement : 4 coarse sand). 344.22 Sqm 3581.22 1232715.08

40 GLASS STRIP 3.7MM THICK WITH 4CM DEPTH 884.04 MT. 32.11 28386.52

41 Distempering (two coat) with oil bound distemper of approved brand andmanufacture and of required shade on undecorated wall surface to give aneven shade over and including a priming coat with cement primer of approvedbrand and manufacture such as Berger, J&N Shalimar, Asian Paints afterthoroughly brushing the sufface free from mortar dropping and other foreinmatter and also including prepairing the surface even with Plaster of Paris orapproved synthetic material and sand papered smooth including cost of allmaterial 13008.86 SQM. 48.45 630279.27

42 Finishing walls with Premium Acrylic Smooth exterior paint with Siliconeadditives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 5302.09 SQM. 85.50 453328.70

43 Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete 18310.95 SQM. 81.13 1485567.37

43 Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete 18310.95 SQM. 81.13 1485567.37

44 Painting two coats over priming coat on steel & other metal surfaces up to 10cm width or sq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-gloss apcolite superlac, Dulux specified finishing to give an even shade &incl. cleaning the surface of all dirt, dust & other foreighn matter sandpreparing and knotting incl. cost of all etc. required for proper completion ofwork. 1536.83 SQM. 78.38 120449.21

45 Painting two coats over priming coat on wood surfaces up to 10 cm width orsq,mt in areas with superior synthetic enamel such as Luxol-3 Hi-glossapcolite superlac, Dulux specified finishing to give an even shade & incl.cleaning the surface of all dirt, dust & other foreighn matter sand preparingand knotting incl. cost of all etc. required for proper completion of work.

665.84 SQM. 80.47 53576.82

46 P / F unplasticified - 110 mm dia P. V. C pipe clips of approved designto unplasticised - P. V. C . rain water pipes by means of 50 x 50 x50mm hard wood plugs, screwed with M. S. screws of required lengthincluding cuitting brick work and fixing in cement mortor 1 : 4(1cement : 4 coarse sand. ) 386.70 MT. 207.67 80305.99

47 Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement: 3coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thickbed of dry brick ballast 40 mm nominal size, well rammed and consolidatedand grouted with fine sand, including finishing the top smooth.

353.61 SQM. 360.00 127300.48

(Satnan)

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10Asst. Account Officer

48 Brick edging 7cm wide 11.4cm. deep to plinth protection with bricks of classdesignation 75 including grouting with cement mortar 1:4 (1 cement : 4 finesand) 353.61 MT. 36.62 12950.08

49 C/O Apron drain 353.61 MT. 1355.23 479223.59

50 Providing /laying of light cinder filling/ 25 mm O.B. brick ballast under floorof toilet /sunken roofs 85.54 CUM. 988.00 84513.52

51 Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofing cementcompound consisting of applying : a) First layer of slurry of cement @ 0.488kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. Thislayer will be allowed to air cure for 4 hours. b) Second layer of slurry ofcement @ 0.242 kg/sqm mixed with water proofing cement compound @0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed withwater curing for 48 hours. The rate includes preparation of surface, treatmentand sealing of all joints, corners, junctions of pipes and masonry with polymermixed slurry

285.14 SQM 242.25 69075.17

52 Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steelpulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer. 32.40 SQM 4729.05 153221.30

52 Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steelpulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer. 32.40 SQM 4729.05 153221.30

53 Providing and fixing curtain rods of 1.25 mm thick brass plates withtwo brass brackets fixed with brass screws and wooden plugs etc.wherever necessary complete.

20 mm diameter. 129.40 SQM 199.98 25876.77

54 Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessaryfilling up the gaps at junctions, i.e. at top, bottom and sides with requiredEPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /stainless steel screws, all complete as per architectural drawings and thedirections of Engineer-in-charge. (Glazing, paneling and dash fasteners to bepaid for separately) :Polyester powder coated aluminium (minimum thicknessof polyester powder coating 50 micron)

Polyester powder coated aluminium (minimum thickness of polyester powdercoating 50 micron) 247.40 KG 354.35 87666.19

For shutters of doors, windows & ventilators including providing and fixinghinges/ pivots and making provision for fixing of fittings wherever requiredincluding the cost of EPDM rubber / neoprene gasket required (Fittings shallbe paid for separately) Powder coated aluminium (minimum thickness ofpowder coating 50 micron) 247.40 KG 406.22 100498.83

BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 10 (Satnan)Asst. Account OfficerProviding and fixing glazing in aluminium door, window, ventilator etc.complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1With float glass panes of 5.0 mm thickness shutters and partitions etc. withEPDM rubber / neoprene gasket. 11.13 SQM 958.55 10668.66

Providing and fixing 12 mm thick prelaminated particle board flat pressedthree layer or graded wood particle board conforming to IS: 12823 Grade lType ll, in panelling fixed in aluminum doors, windows shutters and partitionframes with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineer-in-charge Pre-laminatedparticle board with decorative lamination on both sides

12.37 SQM 1012.80 12528.27

55 Providing and fixing double action hydraulic floor spring of approved brandand manufacture conforming to IS 6315 having brand logo embossed on thebody/plate with double spring mechanism and door weight upto 125 kg, fordoors, including cost of cutting floors, embedding in floors as required andmaking good the same matching to the existing floor finishing and coverplates with brass pivot and single piece M.S. sheet outer box with slide palteetc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness.Floor Spring 6.00 No 1919.05 11514.29Floor Spring 6.00 No 1919.05 11514.29

56 Providing and supplying aluminium extruded tubular and other aluminiumsections as per the architectural drawings and approved shop drawings , thealuminium quality as per grade 6063 T5 or T6 as per BS 1474,including superdurable powder coating of 60-80 microns conforming to AAMA 2604 ofrequired colour and shade as approved by the Engineer-in-Charge. ( The itemincludes cost of material such as cleats, sleeves, screws etc. necessary forfabrication of extruded aluminium frame work. Nothing extra shall be paid onthis account). 2800.00 K.G. 321.34 899745.00

57 Designing, fabricating, testing, protection, installing and fixing in positionsemi (grid) unitized system of structural glazing (with open joints) for linear aswell as curvilinear portions of the building for all heights and all levels,including:

a) Structural analysis & design and preparation of shop drawings for thespecified design loads conforming to IS 875 part III (the system must passedthe proof test at 1.5 times design wind pressure without any failure), includingfunctional design of the aluminum sections for fixing glazing panels ofvarious thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets,screws, toggles, nuts, bolts, clamps etc., structural and weather siliconesealants, flashings, fire stop (barrier)-cum-smoke seals, microwave curedEPDM gaskets for water tightness, pressure equalisation & drainage andprotection against fire hazard including:

280.00 SQM 2343.46 656168.80


BOQ OF CIVIL WORK


QTY.UNIT RATE

AMOUNTRs

1 4 5 6 9 1058 Providing, assembling and supplying vision glass panels (IGUs) comprising of

hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panelunits of size and shape as required and specified, comprising of an outer heatstrengthened float glass 6mm thick, of approved colour and shade withreflective soft coating on surface # 2 of approved colour and shade, an innerHeat strengthned clear float glass 6mm thick, spacer tube 12mm wide,dessicants, including primary seal and secondary seal (structural siliconesealant) etc. all complete for the required performances, as per theArchitectural drawings, as per the approved shop drawings, as specified andas directed by the Engineer-in-Charge. The IGUs shall be assembled in thefactory/ workshop of the glass processor. (Payment for fixing of IGU Panels inthe curtain glazing is included in cost of item No.26.2) For payment, only theactual area of glass on face # 1 of the glass panels (excluding the areas of thegrooves and weather silicone sealant) provided and fixed in position, shall bemeasured in sqm

280.00 SQM 3751.50 1050420.70

59 Extra for openable side / top hung vision glass panels (IGUs) includingproviding and supplying at site all accessories and hardwares for the openablepanels as specified and of the approved make such as heavy duty stainlesssteel friction hinges, min 4 -point cremone locking sets with stainless steelplates, handles, buffers etc. including necessary stainless steel screws/fasteners, nuts, bolts, washers etc. all complete as per the Architecturaldrawings, as per the approved shop drawings, as specified and as directed bythe Engineerin- Charge. 28.00 SQM 2880.69 80659.18

59 Extra for openable side / top hung vision glass panels (IGUs) includingproviding and supplying at site all accessories and hardwares for the openablepanels as specified and of the approved make such as heavy duty stainlesssteel friction hinges, min 4 -point cremone locking sets with stainless steelplates, handles, buffers etc. including necessary stainless steel screws/fasteners, nuts, bolts, washers etc. all complete as per the Architecturaldrawings, as per the approved shop drawings, as specified and as directed bythe Engineerin- Charge. 28.00 SQM 2880.69 80659.18

60 Boring, Providing and installing cast in situ single under reamed piles ofspecified diameter and length below pile cap in M-25 cement concrete, tocarry a safe working load not less than specified, excluding the cost of steelreinforcement but including the cost of boring with bentonite solution andlength of the pile to be embeded in pile cap etc. all complete (length of pile forpayment shall be measured upto to the bottom of pile cap) :

300 mm dia Pile 0.00 M 1962.23 0.00

400 mm dia Pile 1861.50 M 2347.64 4370131.86

61 Vertical load testing of piles in accordance with IS 2911 (Part IV) includinginstallation of loading platform and preparation of pile head or construction oftest cap and dismantling of test cap after test etc. complete as per specification& the direction of Engineer in-charge.

INITIAL TEST 1.00 EACH 53516.16 53516.16

ROUTINE TEST 1.00 EACH 32550.99 32550.99

TOTAL 62226016.07

G. TOTAL 62226016.07

SAY RS. 622.26 LACS.


BOQ of W/S & Sanitary Work

S.N. DESCRIPTION OF ITEMSTOTAL

QTY.UNIT RATE AMOUNT Rs

SANITIARY FIXTURE & ACCESSORIES

1 Providing and fixing water closet squatting pan(Indian type W.C. pan ) with 100mm sand cast IronP or S trap, 10 litre low level white P.V.C. flushingcistern with manually controlled device (handlelever) conforming to IS : 7231, with all fittings andfixtures complete including cutting and making goodthe walls and floors wherever required :

White Vitreous china Orissa pattern W.C. pan ofsize 580x440mm with integral type foot rests.

36.00 each 3101.99 111671.55

2 Providing and fixing white vitreous china pedestaltype water closet (European type) with seat and lid,10 litre low level white vitreous china flushingcistern & C.P. flush bend with fittings &C.I.brackets, 40mm flush bend, overflowarrangement with specials of standard make andmosquito proof coupling of approved municipaldesign complete including painting of fittings andbrackets, cutting and making good the walls andfloors wherever required :

BOQ OF W/S & SANATARY WORK FOR THE PROPOSED CONSTRUCTIONDEGREE COLLEGE (MAIN BUILDING, BOYS & GIRLS HOSTEL)

AT BALRAMPUR U.P.

2 Providing and fixing white vitreous china pedestaltype water closet (European type) with seat and lid,10 litre low level white vitreous china flushingcistern & C.P. flush bend with fittings &C.I.brackets, 40mm flush bend, overflowarrangement with specials of standard make andmosquito proof coupling of approved municipaldesign complete including painting of fittings andbrackets, cutting and making good the walls andfloors wherever required :

W.C. pan with ISI marked white solid plastic seatand lid. 20.00 each 4404.44 88088.75

3 Providing and fixing white vitreous china flat backor wall corner type lipped front urinal basin of430x260x350mm and 340x410x265mm sizesrespectively with automatic flushing cistern withstandard flush pipe and C.P. brass spreaders withbrass unions and G.I clamps complete, includingpainting of fittings and brackets, cutting and makinggood the walls and floors wherever required :

One urinal basin with 5 litre white P.V.C. automaticflushing cistern 4.00 each 3015.87 12063.48Range of two urinal basins with 5 litre white P.V.C.automatic flushing cistern 20.00 each 4908.56 98171.10





4 Providing and fixing wash basin with C.I. brackets,15 mm C.P. brass pillar taps,32 mm C.P. brass wasteof standard pattern, including painting of fittings andbrackets, cutting and making good the wallswherever require :

A White Vitreous China Wash basin size 550x400 mmwith a pair of 15 mm C.P. brass pillar taps. 4.00 each 1872.78 7491.13

B White Vitreous China Flat back wash basin size550x400 mm with single 15 mm C.P. brass pillartap. 38.00 each 1614.95 61368.20

5 Providing and fixing Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with C.I.brackets and stainless steel plug 40 mm includingpainting of fittings and brackets, cutting and makinggood the walls wherever required :

Kitchen sink with drain boardA 510x1040 mm bowl depth 200mm. 0.00 each 5594.93 0.00

Kitchen sink without drain boardKitchen sink without drain boardB 610x460 mm bowl depth 200 mm. 10.00 each 3739.72 37397.23

6 Providing and fixing P.V.C. waste pipe for sink orwash basin including P.V.C. waste fittings complete.

Flexible pipeA 32 mm dia 66.00 each 68.92 4548.89B 40 mm dia 10.00 each 71.16 711.557 Providing and fixing 100 mm sand cast Iron grating

for gully trap. 134.00 each 27.65 3704.438 Providing and fixing mirror of superior glass (of

approved quality) and of required shape and sizewith plastic moulded frame of approved make andshade with 6 mm thick hard board backing :

Rectangular shape 453x357mm 66.00 each 665.29 43908.819 Providing and fixing 600x120x5mm glass shelf with

edges round of supported on anodised aluminiumangle frame with C.P. brass brackets and guard railcomplete fixed with 40 mm long screws, rawl plugsetc., complete. 4.00 each 496.09 1984.36

10 Providing and fixing toilet paper holder :17.34.1 20.00 each 322.86 6457.15

(Satnan)




Asst. Account Officer




11 Providing and fixing soil, waste and vent pipes :100 mm dia.

A Sand cast iron S&S pipe as per IS: 1729. 575.00 metre 812.11 466961.81

12 Providing and fixing M.S. holder-bat clamps ofapproved design to Sand Cast iron/cast iron (spun)pipe embedded in and including cement concreteblocks 10x10x10cm of 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20mmnominal size) including cost of cutting holes andmaking good the walls etc. :

A For 100 mm dia. Pipe 152.00 each 133.62 20309.86

13 Providing and fixing bend of required degree withaccess door, insertion rubber washer 3 mm thick,bolts and nuts complete.

100 mmA Sand cast iron S&S as per IS - 1729 38.00 each 323.29 12284.8314 Providing and fixing heel rest sanitary bend

100 mm diaA Sand cast iron S&S as per IS - 1729 38.00 each 301.20 11445.51A Sand cast iron S&S as per IS - 1729 38.00 each 301.20 11445.5115 Providing and fixing single equal plain junction of

required degree with access door, insertion rubberwasher 3 mm thick, bolts and nuts complete.

100x100x100 mmA Sand cast iron S&S as per IS - 1729 76.00 each 460.09 34966.4616 Providing and fixing terminal guard:

100 mmA Sand cast iron S&S as per IS - 1729 38.00 each 235.03 8931.1417 Providing and fixing collar:

100 mmA Sand cast iron S&S as per IS - 1729 76.00 each 183.16 13920.1618 Providing lead caulked joints to sand cast

iron/centrifugally cast (spun) iron pipes and fittingsof diameter:

A 100 mm 755.00 each 220.69 166617.1819 Providing and fixing trap of self cleansing design

with screwed down or hinged grating with orwithout vent arm complete, including cost of cuttingand making good the walls and floors :

100 mm inlet and 100 mm outletA Sand Cast Iron S&S as per IS: 1729. 134.00 each 714.59 95755.06

(Satnan)




Asst. Account Officer




20 Painting sand cast iron/ centrifugally cast (spun) ironsoil, waste vent pipes and fittings with paint of anycolour such as chocolate grey, or buff etc. over acoat of primer (of approved quality) for new work :

A 100 mm diameter pipe 6000.00 metre 32.16 192945.00

21 Providing and fixing PTMT towel rail complete withbrackets fixed to wooden cleats with CP brassscrews with concealed fitting arrangement ofapproved quality and colour.

450MM long towel rail with total length of 495mm,78mm wide and effective height of 88mm, weighingnot less than 170gms. 27.00 each 388.46 10488.29

WATER SUPPLY PIPES AND FITTING22 Providing and fixing G.I. pipes complete with G.I.

fittings and clamps, including cutting and makinggood the walls etc.

Internal work – Exposed on wall.A 15 mm dia. nominal bore 410.00 metre 172.28 70635.83B 20 mm dia. nominal bore 360.00 metre 210.43 75753.00B 20 mm dia. nominal bore 360.00 metre 210.43 75753.00

C 25 mm dia. nominal bore 245.00 metre 268.19 65705.33

D 32 mm dia. nominal bore 0.00 metre 316.83 0.0023 Concealed pipe including painting with anti

corrosive bitumastic paint, cutting chases andmaking good the wall

A 15 mm dia nominal bore 700.00 metre 250.52 175360.50B 20 mm dia nominal bore 178.00 metre 283.15 50400.2624 Providing and fixing G.I. pipes complete with G.I.

fittings including trenching and refilling etc.

External workA 40 mm dia. nominal bore 900.00 metre 310.79 279713.25

BRASS FITTINGS25 Providing and fixing brass bib cock of approved

quality :

15 mm nominal bore 72.00 each 246.86 17773.7426 Providing and fixing brass stop cock of approved

quality :

A 15 mm nominal bore 222.00 each 246.86 54802.37

B 20 mm nominal bore 18.00 each 326.75 5881.55





27 Providing and fixing gun metal gate valve with C.I.wheel of approved quality (screwed end) :


28 Providing and fixing ball valve (brass) of approvedquality, High or low pressure, with plastic floatscomplete :


29 Providing and fixing uplasticised PVC connectionpipe with brass unions :

30 cm length15 mm nominal bore 206.00 each 56.00 11536.52

30 Providing and fixing C.P. brass shower rose with 15or 20 mm inlet :

100 mm diameter 16.00 each 67.83 1085.2831 Painting G.I. pipes and fittings with synthetic

enamel white paint over a ready mixed priming coat,both of approved quality for new work :

A 15 mm diameter pipe. 1110.00 metre 8.17 9068.70

B 20 mm diameter pipe. 538.00 metre 9.60 5162.11

C 25 mm diameter pipe. 245.00 metre 12.68 3107.21

D 32 mm diameter pipe. 0.00 metre 14.96 0.0032 Painting G.I. pipes and fittings with two coats of

anti-corrosive bitumastic paint of approved quality :

A 15 mm diameter pipe 700.00 metre 4.99 3491.25B 20 mm diameter pipe 178.00 metre 5.84 1039.9733 Providing and filling sand of grading zone V or

coarser grade all-round the G.I. pipes in externalwork.

A 40 mm diameter pipe 900.00 metre 63.22 56900.2534 Providing and fixing G.I. Union in G.I. pipe

including cutting and threading the pipe and makinglong screws etc. complete (New work)


B 20 mm nominal bore 9.00 each 169.91 1529.17





35 Providing and placing on terrace (at all floor levels)RCC water storage tank with cover and makingnecessary holes for inlet, outlet and overflow pipesbut without fittings and the base support

80000.00 per litre 14.25 1140000.00FOR RCC UG SUMP 50000.00 per litre 14.25 712500.00C.P.BRASS FITTINGS.

36 Providing and fixing C.P. brass bib cock ofapproved quality conforming to IS:8931

15 mm nominal bore. 4.00 each 435.48 1741.9237 Providing and fixing C.P. brass long nose bib cock

of approved quality conforming to IS standards andweighing not less than 810 gms.

15 mm nominal bore. 8.00 each 755.44 6043.5238 Providing and fixing C.P. brass stop cock

(concealed) of standard design and of approvedmake conforming to IS:8931.

15 mm nominal bore. 4.00 each 587.77 2351.0639 Providing and fixing C.P. brass angle valve for basin

mixer and geyser points of approved qualityconforming to IS:8931 a) 15 mm nominal bore

39 Providing and fixing C.P. brass angle valve for basinmixer and geyser points of approved qualityconforming to IS:8931 a) 15 mm nominal bore

15mm nominal bore 4.00 each 481.37 1925.46EXTERNAL SEWERAGE SYSTEM

40 Excavating trenches of required width for pipes,cables, etc, including excavation for sockets, depthupto 1.5 m including getting out the excavatedmaterials, returning the soil as required in layers notexceeding 20 cm in depth including consolidatingeach deposited layers by ramming, watering etc.stacking serviceable material for measurements anddisposal of unserviceable material as directed,within a lead of 50m :

Pipes, cables etc. exceeding 80 mm dia but notexceeding 300 mm dia. 525.00 metre 159.13 83540.63

41 Providing, laying and jointing glazed stonewarepipes grade ‘A’ with stiff mixture of cement mortarin the proportion of 1:1 (1 cement : 1 fine sand)including testing of joints etc. complete :

A 150 mm diameter 525.00 metre 286.81 150572.63





42 Providing and laying cement concrete 1:5:10 (1cement : 5 coarse sand : 10 graded stone aggregate40 mm nominal size) all-round S.W. pipes includingbed concrete as per standard design:

A 150 mm diameter S.W. pipe 550.00 metre 631.56 347358.00

43 Providing and fixing square-mouth S.W. gully trapgrade 'A'’ complete with C.I. grating brick masonrychamber with water tight C.I. cover with frame of300 x300 mm size (inside) the weight of cover to benot less than 4.50 kg and frame to be not less than

100x100 mm size P typeWith F.P.S. Bricks class designation 75 29.00 each 1444.86 41900.80

44 Constructing brick masonry manhole in cementmortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. topslab with 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarsesand : 8 grade

44 Constructing brick masonry manhole in cementmortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. topslab with 1:2:4 mix (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarsesand : 8 grade

Inside size 90x80 cm and 45 cm deep including C.I.cover with frame (light duty) 455x610 mm internaldimensions total weight of cover and frame to be notless than 38 kg (weight of cover 23 kg and weight offrame 15 kg) :

With F.P.S. bricks with class designation 75 35.00 each 7659.57 268084.78

45 Inside size 120x90 cm and 90 cm deep includingC.I. cover with frame (medium duty) 500 mminternal diameter, total weight of cover and frame tobe not less than 116 kg (weight of cover 58 kg andweight of frame 58 kg) :

With F.P.S. bricks class designation 75 12.00 each 16712.40 200548.80

TOTAL 5370486.71

G. TOTAL 5370486.71


boq of civil work for the proposed ... fabrication and supply of angle iron or t iron door/window...

Documents