bodytalk

APRIL 2013

Nexa Autocolor WB advert.indd 1 18/03/2013 09:09:32

NatioNwide Coverage:

Aberdeen 0845 034 0850

Basingstoke 01256 320 641

Birmingham 0121 313 2252

Bristol 01179 828 397

Chelmsford 01245 266 736

Glasgow 0141 332 7007

Inverness 0845 241 2561

Leeds 0113 243 0481

Maidstone 01622 790305

Newcastle 0191 276 6566

Northampton 01604 624 211

Plymouth 01752 338 172

Swansea 01792 587 196

Warrington 01925 810 276

1889 - 2013: Experience Makes A Difference

[email protected]

@BBDUK

BODYTALKaLSo iN tHiS iSSUe:

Nexa Autocolor Waterborne Clearcoat

Revamp The Headlamp

Win Goodwood Festival Of Speed Tickets

End to end repair… the green way

BODYTALK

P210-8861 HArdener

Dedicated hardener to be used with P910-5510

Part No: ICIP21088610050

mAsK fILm dIsPenser

Sturdy, portable, polythene masking •dispenser Simple construction •Can be used vertical or horizontal •Fast roll change •Fits the majority of masking film rolls •Position dispenser next to vehicle, pull film •over the vehicle and cut to size

Part no: BdPBmfd

£27.99OFFER

WHAT’S NEW

WATerBorne CLeArCoAT P910-5510

Nexa Autocolor is committed to developing innovative and environmentally sustainable solutions that are used to maintain, repair and protect cars.

Nexa Autocolor is proud to introduce a new Waterborne Clearcoat to offer customers an end to end green repair system. The launch of this new Waterborne Clearcoat builds on the heritage of the world’s first waterborne basecoat technology introduced in 1992, the ground-breaking ‘next generation’ Aquabase Plus basecoats introduced in 2006 and the Eco+ PET primer technology launched in 2012.

Developed using the most advanced waterborne clearcoat technology available, the new Waterborne Clearcoat dramatically reduces solvent emissions by 74% when compared to a typical solventborne clearcoat, improving air quality, and allowing Bodyshops to dramatically reduce their emissions without compromising on quality.

It is simple to mix and easy to use, benefitting from a ‘one-visit’ application process. The superb gloss levels with continued gloss holdout achieved ensure a quality reproduction of the OE finish.With its one visit application, there is no need for additional bake cycles offering an optimal process to ensure that the bodyshop remains productive and profitable whilst delivering a high quality repair. The addition benefit of the low odour technology used in P910-5510 gives a more pleasant mixing room environment

Part no: ICIP91055100100

P980-2252 THInner

Dedicated thinner to be used with P910-5510

LIgHTnIng mAsK

Anti-static paint absorbent film.Suitable for waterborne and 2K paint systems•Supplied in a sturdy dispenser box•

Part no: size

BdPBLm120 120m x 5m

BdPBLm150 150m x 4m

Buy any 3 rolls for £52.99

WHeeL mAsKs

An elasticated wheel cover made from polypropylene. Reduces cleaning time, versatile, easy to store•Quickly mask wheels and tyres from overspray•Fits over most common sizes wheels•Lightweight•Supplied in packs of 4•Also available in Tyvek for greater durability•

Part No: BdPBWm

£3.49OFFER

sAfeTY BLAde CUTTer

Allows the safe cutting of masking materials without the •risk of damaging the vehicle’s paintworkDual edged blade•Reduces risk of tearing poly/paper or marking a vehicle•Safer for user•

Part no: BdPBsBC

sWAge TAPe

Specifically designed to aid the masking of swage lines, sunken screens, roof rails and other difficult masking areas.

Unique flat and wide design gives increased rigidity making •masking swage lines quick and easy - no more sags Open cell foam easily absorbs overspray•Rounded edges allow for a seamless transition of the newly •applied paint into the existingTwo adhesive tracks ensure •secure attachment to any panelCustom adhesive formula •allows for easy adjustment or repositioningEasy to remove - no ghosting •or adhesive transferSuitable for use in low bake •ovensSupplied in a convenient 40 •meter dispenser box (5 tracks of 8 meters)

Part No: BdPBfsT

£12.99OFFER

emBLem AdHesIve TAPe

For professional re-application of vehicle badges and emblems •Saves time as there is no need to cut around double sided tape•It is also ideal for positioning parts before final fixing or for •fixing decorative and promotional items10 sheets 50mm x 300mm•

Part No: BdPBeAT

£14.99OFFER

seAm seALer TAPe 9mm x 10m

A flat seam replacement tape designed to replace door skin seams.

Overpaintable immediately •Transparent•Flexible •Excellent resistance to solvent, chemical, UV and heat, making •the tape bond securely to a very wide range of substrates

Part No: BdPBssT

£11.99OFFER

BodY rePAIr TAPe

A 30 micron aluminium foil based tape •Allows punctured or pierced bodywork to be repaired with •minimum effortProvides a reliable substrate to fill over•Good UV resistance•50mm x 3m•

Part No: BdPBrT

£2.99OFFER

End to end repair... the green way

yOU WILL ALSO NEED…

Buy a pack of 10 for £5.90

door sKIn foAm fILm 600mm x 10m

Replaces inner door skin membrane - An easy way to replace •the inner door skin membraneEasy fit - This comes in a single length which can be cut to •size. The release liner grid printed on to the paper to allow difficult shapes to be cut from it easilySound deadening - Once fitted this also has sound •deadening properties to reduce road noiseDispensing roll - It is easily dispensed from the box•

Part No: BdPBdsff

£23.99OFFER

PLAsTIC mIxIng CUPs

A premium cup specifically designed for paint mixing. Featuring accurate calibrations that can be read from the inside. The flat, wide, base ensures all products are fully mixed and the cup is stable. It is available in a large range of sizes complemented by a similar range of tight fitting lids.

Versatile•Easy to use, easy to store•Less risk of spillages, secure for transportation•Suitable for both solvent and water based paint•Flat bottoms aid stirring•Protection from dust and contaminants•Space efficient •Compatible with ‘Colad PCLS System’•

Part No: Size Qty Offer

BDPBPMC350 350ml Pack of 50 £5.99

£5.99FROM

£97.41TRADE

£85.11TRADE

£40.20TRADE

BODYTALK

P210-8861 HArdener

Dedicated hardener to be used with P910-5510

mAsK fILm dIsPenser

Sturdy, portable, polythene masking •dispenser Simple construction •Can be used vertical or horizontal •Fast roll change •Fits the majority of masking film rolls •Position dispenser next to vehicle, pull film •over the vehicle and cut to size

Part no: BdPBmfd

£27.99OFFER

WHAT’S NEW

WATerBorne CLeArCoAT P910-5510

Nexa Autocolor is committed to developing innovative and environmentally sustainable solutions that are used to maintain, repair and protect cars.

Nexa Autocolor is proud to introduce a new Waterborne Clearcoat to offer customers an end to end green repair system. The launch of this new Waterborne Clearcoat builds on the heritage of the world’s first waterborne basecoat technology introduced in 1992, the ground-breaking ‘next generation’ Aquabase Plus basecoats introduced in 2006 and the Eco+ PET primer technology launched in 2012.

Developed using the most advanced waterborne clearcoat technology available, the new Waterborne Clearcoat dramatically reduces solvent emissions by 74% when compared to a typical solventborne clearcoat, improving air quality, and allowing Bodyshops to dramatically reduce their emissions without compromising on quality.

It is simple to mix and easy to use, benefitting from a ‘one-visit’ application process. The superb gloss levels with continued gloss holdout achieved ensure a quality reproduction of the OE finish.With its one visit application, there is no need for additional bake cycles offering an optimal process to ensure that the bodyshop remains productive and profitable whilst delivering a high quality repair. The addition benefit of the low odour technology used in P910-5510 gives a more pleasant mixing room environment

Part no: ICIP91055100100

P980-2252 THInner

Dedicated thinner to be used with P910-5510

LIgHTnIng mAsK

Anti-static paint absorbent film.Suitable for waterborne and 2K paint systems•Supplied in a sturdy dispenser box•

Part no: size

BdPBLm120 120m x 5m

BdPBLm150 150m x 4m

Buy any 3 rolls for £52.99

WHeeL mAsKs

An elasticated wheel cover made from polypropylene. Reduces cleaning time, versatile, easy to store•Quickly mask wheels and tyres from overspray•Fits over most common sizes wheels•Lightweight•Supplied in packs of 4•Also available in Tyvek for greater durability•

Part No: BdPBWm

£3.49OFFER

sAfeTY BLAde CUTTer

Allows the safe cutting of masking materials without the •risk of damaging the vehicle’s paintworkDual edged blade•Reduces risk of tearing poly/paper or marking a vehicle•Safer for user•

Part no: BdPBsBC

sWAge TAPe

Specifically designed to aid the masking of swage lines, sunken screens, roof rails and other difficult masking areas.

Unique flat and wide design gives increased rigidity making •masking swage lines quick and easy - no more sags Open cell foam easily absorbs overspray•Rounded edges allow for a seamless transition of the newly •applied paint into the existingTwo adhesive tracks ensure •secure attachment to any panelCustom adhesive formula •allows for easy adjustment or repositioningEasy to remove - no ghosting •or adhesive transferSuitable for use in low bake •ovensSupplied in a convenient 40 •meter dispenser box (5 tracks of 8 meters)

Part No: BdPBfsT

£12.99OFFER

emBLem AdHesIve TAPe

For professional re-application of vehicle badges and emblems •Saves time as there is no need to cut around double sided tape•It is also ideal for positioning parts before final fixing or for •fixing decorative and promotional items10 sheets 50mm x 300mm•

Part No: BdPBeAT

£14.99OFFER

seAm seALer TAPe 9mm x 10m

A flat seam replacement tape designed to replace door skin seams.

Overpaintable immediately •Transparent•Flexible •Excellent resistance to solvent, chemical, UV and heat, making •the tape bond securely to a very wide range of substrates

Part No: BdPBssT

£11.99OFFER

BodY rePAIr TAPe

A 30 micron aluminium foil based tape •Allows punctured or pierced bodywork to be repaired with •minimum effortProvides a reliable substrate to fill over•Good UV resistance•50mm x 3m•

Part No: BdPBrT

£2.99OFFER

End to end repair... the green way

yOU WILL ALSO NEED…

Buy a pack of 10 for £5.90

door sKIn foAm fILm 600mm x 10m

Replaces inner door skin membrane - An easy way to replace •the inner door skin membraneEasy fit - This comes in a single length which can be cut to •size. The release liner grid printed on to the paper to allow difficult shapes to be cut from it easilySound deadening - Once fitted this also has sound •deadening properties to reduce road noiseDispensing roll - It is easily dispensed from the box•

Part No: BdPBdsff

£23.99OFFER

PLAsTIC mIxIng CUPs

A premium cup specifically designed for paint mixing. Featuring accurate calibrations that can be read from the inside. The flat, wide, base ensures all products are fully mixed and the cup is stable. It is available in a large range of sizes complemented by a similar range of tight fitting lids.

Versatile•Easy to use, easy to store•Less risk of spillages, secure for transportation•Suitable for both solvent and water based paint•Flat bottoms aid stirring•Protection from dust and contaminants•Space efficient •Compatible with ‘Colad PCLS System’•

Part No: Size Qty Offer

£5.99FROM

£97.41TRADE

£85.11TRADE

£40.20TRADE

BODYTALK

Headlamp repair is one way to make all repair models more profitable or affordable. With the increasing prices on new headlamp units (e.g. over £700 for the new BmW 5 series xenon) there is a huge demand to be able to repair cosmetic damage to headlamp lenses.

now you can repair a headlamp with cosmetic damage rather than have to replace it with Bodylines latest range of products.

To begin the repair, use a Bodyline 80mm P80 gripspeed disc to sand the damaged area. follow this by sanding the complete headlamp with a Bodyline 80mm P180 gripspeed disc to remove the 80 grade scratches and original Uv coating. mirror this process with the P320, P500 & P1000 80mm gripspeed discs -

this will give the required surface to complete the repair.

now all the damage has been removed, the headlamp needs preparing for the topcoat (re-application of the Uv coating).

firstly, prepare the edges of the headlamp using the Bodyline Ultra-fine Weave Pad to give a mechanical key. Clean the repaired area using a solvent degreaser and Waterbased Pre-Cleaner in combination with the Bodyline Pre-Cleaning Cloth to remove any dust or contaminates. mask the surrounding areas of the headlamp to protect the undamaged areas.

Again, clean the headlamp with the Bodyline eC degreaser & Bodyline Pre-Cleaning cloth to ensure the surface is completely

clean and ready for application of topcoat.

Using the pre measured product, mix the contents of the Headlamp repair Kit together by simply pouring the Bodyline Headlamp repair Activator (small pot) into the Bodyline Headlamp Coating and stir thoroughly . (1 kit contains enough material to repair and protect 2 headlamps)

spray the first coat of headlamp protection and allow to flash off for 5 minutes before applying the second coat. Allow the coats to dry for 30 minutes at 60°C. The special chemical capabilities of the coatings are designed to withstand the double Uv attack from sunlight. If the Uv Light is able to penetrate through the lens it will bounce back off the reflector which

could also damage the inside of the lens - this can be very harmful to plastic finishes. The innovative coating also has the capability to allow it to withstand abrasion from carwashes and stone chipping.

once the headlamp has been allowed to dry, the repair is complete and is ready to be reassembled on the car. from start to finish the whole repair process can be completed within 2 hours, enabling an easy repair that offers additional labour charges (rather than potentially very expensive replacement unit cost!)

We find the 80mm discs are ideal for small area repair techniques and hard to reach areas that need a high standard of preparation. They come in a wide range of grits, which make them suited to a wide range of applications in our bodyshop. not only are they a great performing disc they represent great value for money compared to others brands on the market. The 80mm Bodyline discs are an invaluable product to any bodyshops production.

Alan Bowdley - Lead Paintersovereign Horseboxes, Wolverhampton

Product of the month

Top Tips - Headlamp Repair

Bodyline gripspeed 80mm 3 Hole discs are superior performance discs

designed for smart repairs, smaller areas & wheel repairs. By using the smaller discs this makes it possible to keep the repair localised.

The small diameter of the discs allows for awkward areas to be accessed easily ensuring a consistent repair is attained. By using a 2.5mm orbital sander with the gripspeed 80mm discs this produces a finer scratch pattern on the finer graders which will ultimately help to reduce polishing time and overall process time of the repair. greater user control over sanding is also gained by using the smaller sander unit as the orbit can be controlled and confined.

With the incorporated ceramic grain properties of the discs, improved cutting and maximized stock removal is achieved allowing for a consistent finish. The ingenious stearate coating significantly reduces clogging of the abrasive. The noticeable net result is an increased service lifetime.

Available in a full grit range, Bodylines gripspeed 80mm 3 Hole discs meet every step of the repair process making them the ideal choice for any Bodyshop.

R E V A M P T H E H E A D L A M P

HeAdLAmP refInIsH KIT

Specifically formulated UV resistant coating, to enable the repair of cosmetic scuffs and scratches to the headlamp lens. By following the Bodyshop Headlamp Refinish Process, a bodyshop can now repair a cosmetically damaged headlamp where previously a costly new unit would be required. 1 kit contains enough product to coat 2 headlamps.

Simple 2:1 mixing ratio•1 kit can be invoiced to one vehicle repair•Increased UV resistance•Full adhesion to plastics•Excellent abrasion resistance•

Part no: BDPBHRK

£29.99OFFER

Pre CLeAnIng CLoTH 28 x 37Cm - 400 sHeeTs

The ultimate wipe for use while solvent wiping, resistant to solvents, and is hard-wearing, making it the perfect solution for pre-paint solvent wiping jobs.

Silicone-free - safe to use•Solvent-resistant - allows the usage of different •solventsLow solvent extractables - preserves clean surfaces•Very low linting - minimizes fibre shedding•

Part No: BdPBPCC

ULTrA fIne HAnd PAds PACK of 10

Long product life, consistent surface finish•Non metallic, 3D construction of nylon fibres•Water & solvent resistant, resists clogging & smearing•Uniform finish, conformable•No work place contamination, no break through on •coatingHighly adaptable to contours, excellent for keying surfaces•Can be used wet or dry, usable on both sides•

Part no: BdPBWPHUf

£7.49OFFER

grIPsPeed 80mm dIsCs

A superior performance abrasive disc•Paper Discs P80 to P500 grit •Incorporating Ceramic Grain for improved cutting, stock removal and longer service life•Ingenious stearate coating for reduced clogging and longer service life•

Part no: description grit

BdPsAd80803 3 Hole gripspeed Paper 80mm disc P80

£29.99OFFER

£5.99OFFER

BODYTALK

Headlamp repair is one way to make all repair models more profitable or affordable. With the increasing prices on new headlamp units (e.g. over £700 for the new BmW 5 series xenon) there is a huge demand to be able to repair cosmetic damage to headlamp lenses.

now you can repair a headlamp with cosmetic damage rather than have to replace it with Bodylines latest range of products.

To begin the repair, use a Bodyline 80mm P80 gripspeed disc to sand the damaged area. follow this by sanding the complete headlamp with a Bodyline 80mm P180 gripspeed disc to remove the 80 grade scratches and original Uv coating. mirror this process with the P320, P500 & P1000 80mm gripspeed discs -

this will give the required surface to complete the repair.

now all the damage has been removed, the headlamp needs preparing for the topcoat (re-application of the Uv coating).

firstly, prepare the edges of the headlamp using the Bodyline Ultra-fine Weave Pad to give a mechanical key. Clean the repaired area using a solvent degreaser and Waterbased Pre-Cleaner in combination with the Bodyline Pre-Cleaning Cloth to remove any dust or contaminates. mask the surrounding areas of the headlamp to protect the undamaged areas.

Again, clean the headlamp with the Bodyline eC degreaser & Bodyline Pre-Cleaning cloth to ensure the surface is completely

clean and ready for application of topcoat.

Using the pre measured product, mix the contents of the Headlamp repair Kit together by simply pouring the Bodyline Headlamp repair Activator (small pot) into the Bodyline Headlamp Coating and stir thoroughly . (1 kit contains enough material to repair and protect 2 headlamps)

spray the first coat of headlamp protection and allow to flash off for 5 minutes before applying the second coat. Allow the coats to dry for 30 minutes at 60°C. The special chemical capabilities of the coatings are designed to withstand the double Uv attack from sunlight. If the Uv Light is able to penetrate through the lens it will bounce back off the reflector which

could also damage the inside of the lens - this can be very harmful to plastic finishes. The innovative coating also has the capability to allow it to withstand abrasion from carwashes and stone chipping.

once the headlamp has been allowed to dry, the repair is complete and is ready to be reassembled on the car. from start to finish the whole repair process can be completed within 2 hours, enabling an easy repair that offers additional labour charges (rather than potentially very expensive replacement unit cost!)

We find the 80mm discs are ideal for small area repair techniques and hard to reach areas that need a high standard of preparation. They come in a wide range of grits, which make them suited to a wide range of applications in our bodyshop. not only are they a great performing disc they represent great value for money compared to others brands on the market. The 80mm Bodyline discs are an invaluable product to any bodyshops production.

Alan Bowdley - Lead Paintersovereign Horseboxes, Wolverhampton

Product of the month

Top Tips - Headlamp Repair

Bodyline gripspeed 80mm 3 Hole discs are superior performance discs

designed for smart repairs, smaller areas & wheel repairs. By using the smaller discs this makes it possible to keep the repair localised.

The small diameter of the discs allows for awkward areas to be accessed easily ensuring a consistent repair is attained. By using a 2.5mm orbital sander with the gripspeed 80mm discs this produces a finer scratch pattern on the finer graders which will ultimately help to reduce polishing time and overall process time of the repair. greater user control over sanding is also gained by using the smaller sander unit as the orbit can be controlled and confined.

With the incorporated ceramic grain properties of the discs, improved cutting and maximized stock removal is achieved allowing for a consistent finish. The ingenious stearate coating significantly reduces clogging of the abrasive. The noticeable net result is an increased service lifetime.

Available in a full grit range, Bodylines gripspeed 80mm 3 Hole discs meet every step of the repair process making them the ideal choice for any Bodyshop.

R E V A M P T H E H E A D L A M P

HeAdLAmP refInIsH KIT

Specifically formulated UV resistant coating, to enable the repair of cosmetic scuffs and scratches to the headlamp lens. By following the Bodyshop Headlamp Refinish Process, a bodyshop can now repair a cosmetically damaged headlamp where previously a costly new unit would be required. 1 kit contains enough product to coat 2 headlamps.

Simple 2:1 mixing ratio•1 kit can be invoiced to one vehicle repair•Increased UV resistance•Full adhesion to plastics•Excellent abrasion resistance•

Part no: BDPBHRK

£29.99OFFER

Pre CLeAnIng CLoTH 28 x 37Cm - 400 sHeeTs

The ultimate wipe for use while solvent wiping, resistant to solvents, and is hard-wearing, making it the perfect solution for pre-paint solvent wiping jobs.

Silicone-free - safe to use•Solvent-resistant - allows the usage of different •solventsLow solvent extractables - preserves clean surfaces•Very low linting - minimizes fibre shedding•

Part No: BdPBPCC

ULTrA fIne HAnd PAds PACK of 10

Long product life, consistent surface finish•Non metallic, 3D construction of nylon fibres•Water & solvent resistant, resists clogging & smearing•Uniform finish, conformable•No work place contamination, no break through on •coatingHighly adaptable to contours, excellent for keying surfaces•Can be used wet or dry, usable on both sides•

Part no: BdPBWPHUf

£7.49OFFER

grIPsPeed 80mm dIsCs

A superior performance abrasive disc•Paper Discs P80 to P500 grit •Incorporating Ceramic Grain for improved cutting, stock removal and longer service life•Ingenious stearate coating for reduced clogging and longer service life•

Part no: description grit

£29.99OFFER

£5.99OFFER

distribution Ltd is the owner or the licensee of all intellectual property

rights arising out of or in connection with this document. The document

and its content are protected by copyright laws. All such rights are

reserved. The content of this document is provided without any

guarantees, conditions or warranties as to its accuracy and, to the fullest

extent permitted by law, Brown Brothers distribution Ltd disclaims

all liability and responsibility arising from any reliance placed on this

document and its content. All prices are subject to change, offers expire

30th April 2013. Pictures for representation purposes only. THe

2 WeeKend enTrY TICKeTs

To goodWood fesTIvAL of

sPeed (11th-14th July 2013)

HoW mUCH 150 meTre x 4 meTre mAsKIng sHeeT fILm Is Used Per JoB As An AverAge BAsed on PUrCHAses for 200,000 rePAIrs A – 6.45 B – 5.81 C – 6.28 d – 5.64

PLeAse send YoUr AnsWers ALong WITH YoUr nAme And ConTACT nUmBer To [email protected]

CLosIng dATe for enTrIes Is 31sT mAY 2013. WInner WILL Be AnnoUnCed WITHIn 30 dAYs of THe ComPeTITIon CLosIng dATe.

Terms And CondITIons AvAILABLe on reqUesT from YoUr LoCAL BroWn BroTHers rePresenTATIve

TrAffIC fILm remover sTAndArd ConCenTrATe

A concentrated traffic film remover. Silicone free•Cost effective, economical in use•Free rinsing•Pre-dilute 1 part concentrate with 7 parts water•Machine dilution, 2%•Manual dilution, 1:4•

Part no: description Offer

BdPBTfrs5 5 Litres £6.99

BdPBTfrs25 25 Litres £23.99

£6.99FROM

CLeAn & sHIne sHAmPoo 5 LITres

A unique cationic shampoo developed for the washing of vehicles. It facilitates thorough cleaning without excessive foam and de-waters the vehicle completely on rinsing, leaving the windows spotlessly bright and the paintwork glossy and free from unsightly limescale deposits.

High wax finish•Easy to use•Fast streak free drying•Manual dilution 0.2%-0.5%•

Part no: BdPBCss5

£8.49OFFER

CLAY BAr 200gm

Easy to use, no training required•Safe but effective•Reduces contaminant removal time•Contains no hazardous elements•Can be used over and over again•Silicone free•Removes overspray and minor imperfections•Use prior to polishing•

Part no: BdPBCB

£14.99OFFER

CLeArCoAT AerosoL

A high performance 1K lacquer which gives a crystal clear finish that can be applied over all water and solvent based basecoats and is ideal for smart repairs.

Two nozzles - 1 variable (producing a changeable fan) •& 1 standard round nozzleUltra glossy•UV and petrol resistant•Crystal clear•Fast drying•Can be machine polished•

Part no: BdPBCCA

£4.99OFFER

WALK THIs WAY To WArrIngTon

We are pleased to announce the relocation of our manchester branch to Warrington as part of ongoing developments to improve the branch network. The relocation to the 7418 sq. ft. branch provides Warrington with the much needed storage to ensure maximum stock holding of core lines, a fully equipped dedicated mixing room & improved road links to customers.

bodytalk

Documents