bmw e46 m3 supersprint headers, connecting pipes and x-pipe installation in long island , new york
Post on 12-Sep-2014
1.214 views
DESCRIPTION
This Dinan M3 already had a host of goodies before it came to us. The owner is very meticulous and only puts the best parts on his car and wants his car worked on by professionals.As expected, he was on the quest for more performance, so he purchased the Supersprint headers, connecting pipes and x-pipe from our online store and brought the car in to have them installed.Another successful installation and happy customer.TRANSCRIPT
www.rpmnorth.com
European Car Products, Performance, Repair and maintenance
BMW E46 M3 Supersprint Headers, Connecting Pipes and X-Pipe installation in Long Island , New York
Phone: (516) 870-0351 E-mail: [email protected]
www.rpmnorth.comRPM Racing,120, Fairchild Ave Plainview, NY-11803
E-mail: [email protected]
This Dinan M3 already had a host of goodies before it came to us. The owner is
very meticulous and only puts the best parts on his car and wants his car worked
on by professionals.
E-mail: [email protected]
Here’s the immaculate M3
E-mail: [email protected]
The Methanol injection kit was installed first while waiting for the headers to arrive. We
also downloaded and saved the “tune” from the Dinan ECU flash.
E-mail: [email protected]
Here’s the Supersprint system laid out. It comes with the hardware and flanges to bolt
right up without any cutting or welding.
E-mail: [email protected]
We then removed the stock headers and connecting pipes.
E-mail: [email protected]
The engine mount was removed to make room to get the stock headers out and new
ones in.
E-mail: [email protected]
After supporting the engine, the headers were removed and preparation for the new
headers began.
E-mail: [email protected]
Now you can see the differences between the stock exhaust and the Supersprint exhaust.
E-mail: [email protected]
After swapping the O2 sensors from the stock system over to the Supersprint system, the new
system was installed.
Note: The Supersprint headers and pipes have ample bungs to accept the O2 sensors in different locations for your convenience.
E-mail: [email protected]
Everything was bolted up and checked for proper clearances. All O2 sensors were
reconnected and the car was started, warmed up and checked for exhaust leaks.
E-mail: [email protected]
No leaks, no rattles…all looks good. Better yet, sounds great!After all the hardware was installed, we re-tuned the
ECU for the increase in boost and new exhaust system. Furthermore, we adjusted the ECU to take care of the
check engine lights triggered by the O2 sensors.
E-mail: [email protected]
…Another successful installation and happy customer.
www.rpmnorth.com
European Car Products, Performance, Repair and maintenance
Phone: (516) 870-0351 E-mail: [email protected]
www.rpmnorth.comRPM Racing,120, Fairchild Ave Plainview, NY-11803
We also keep branded aftermarket auto parts
with original company warranty.Give your BMW a new LIFE.