BlackBerry Z30 Battery ReplacementReplace the internal Battery of this device

Written By: Hans

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 8

INTRODUCTION

Replace the internal Battery of this device

TOOLS:iFixit Opening Tools (1)

Spudger (1)

T5 Torx Screwdriver (1)

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 8

https://www.ifixit.com/Store/Parts/iFixit-Opening-Tool/IF145-335-2http://www.ifixit.com/Tools/Spudger/IF145-002http://www.ifixit.com/Tools/T5-Torx-Screwdriver/IF145-039-2

Step 1 — Battery cover

Remove the battery cover bygrabbing the notch under the bottomspeakers and lifting.

Step 2 — Remove SIM and Media Card

Remove the SIM card and the MediaSD card by pushing on them.

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 8

Step 3 — Unscrewing the LCD panel

Locate and unscrew all 10 T5 screws around the back cover

Step 4 — Separate the LCD from the Frame

Use Plastic opening tools to separate the LCD from the Main body

Do NOT remove the screen yet, it is attached with a very fragile ribbon to the main board.

Start on the same side of the Audio Jack

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 8

Step 5 — Remove the LCD

Use a plastic tool to carefully switch up the LCD ribbon holder

Detach the LCD from the main board

When installing the new LCD, make sure the ribbon is inserted to the white line.

Step 6 — LCD Panel removal

You can now detach the LCD Panelfrom the main frame.

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 8

Step 7 — Untie the System board

With a plastic tool, untie the systemboard by detaching the ribbonsattached to it

The battery ribbon is on the bottomright

Be gentle when detaching theseRibbons as they are very easy totear and damage.

Step 8 — Untie the System board Part 2

Be gentle as any other system boardribbons, they are very easy todamage

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 8

Step 9 — Untie the system board Part 3

Power Button /Audio Jack

Flash

Rear Facing Camera

Step 10 — System board removal

Once all Ribbons untied, gentlywiggle the system board out of theframe

Do not pull hard as there might be aribbon on the way

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 8

To reassemble your device, follow these instructions in reverse order.

This document was last generated on 2017-06-24 12:28:18 PM.

Step 11 — Remove the Rear Camera

Use a pair of pliers to remove the rear facing camera

Step 12 — Remove the Battery

If this is the original battery, it might be hold down by VERY strong adhesive on the top, middle andbottom part. Be careful not to damage the battery

As pointed in the comments, be careful about the NFC membrane when removing the battery. Useheat to loosen the glue.

BlackBerry Z30 Battery Replacement

© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 8

BlackBerry Z30 Battery ReplacementWritten By: HansINTRODUCTION

TOOLS:Step 1 — Battery coverStep 2 — Remove SIM and Media CardStep 3 — Unscrewing the LCD panelStep 4 — Separate the LCD from the FrameStep 5 — Remove the LCDStep 6 — LCD Panel removalStep 7 — Untie the System boardStep 8 — Untie the System board Part 2Step 9 — Untie the system board Part 3Step 10 — System board removalStep 11 — Remove the Rear CameraStep 12 — Remove the Battery