best of selection - ptsc
TRANSCRIPT
BEST OF SELECTIONHIGH PERFORMANCE PRODUCTS
QUICK-SEARCH YG-1 PRODUCTS!!www.yg1.kr
YG1YEBS190822003Search ‘YG-1’ on social media outlets
HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909E-mail : [email protected]
Note The new address above has currently been updated to the new Korean postal standard valid since 2014. Notice that the physical Head Office location did NOT change.
2 www.yg1.kr 3www.yg1.kr
FOR HIGH-HARDENED STEELS (HRc50-70)
• Made from premium grade carbide material for oil mist / high-speed machining
• YG-1’s customized coating, along with negative rake angles• Excellent finished surface
FEATURES & BENEFITS• Square Ø 0.1mm - Ø 25mm (.004 - 1")• Corner Radius Ø 0.5mm - Ø 20mm (1/16 - 1") • Ball Nose Ø 0.1mm - Ø 25mm (1/32 - 1/4")
RANGE
BLUE- Coated Solid Carbide End Mills for High-Hardened Steels
Nano Grain Carbide
Negative Rake Angle
Corner Geometries
Blue Coating
Miniature 2 FluteCorner Radius
4 FluteCorner Radius
2&4 FluteBall Nose
4 FluteHigh Feed
6&8 Flute45 ̊Helix
HIGH-SPEED MACHINING FOR EXOTIC MATERIALS
Y-Coated Solid Carbide End Mills for Titanium and other Exotic Materials
• For Titanium, Stainless Steels and also excellent for Steels• For high-speed machining and heavy cutting• Dual stepped-core on 4 flute, 5 flute with multiple helix
FEATURES & BENEFITS• Square Ø 6mm - Ø 25mm (1/8 - 1")• Corner Radius Ø 6mm - Ø 25mm (1/8 - 1")• Roughing Ø 6mm - Ø 25mm (1/4 - 1")
RANGE
TitaNox Power for exotic materials, holds a 4 flute double core, 5 flute multiple helix, and rougher. It shows excellent performances on Titanium, Stainless Steels and also on Steels. With a 2-stepped core and multiple helix, along with YG-1’s special coating, its latest technology makes it possible for heavy profiling and high-speed machining.
▶ 2 STEP CORE4 Flute Double Core End Mills With Corner Radius
Large Chip Pocket• Excellent Chip Evacuation.• Minimizes Chips from Clogging• Good Performance for Slotting Applications
Thick Core• Higher Rigidity• Better Stability Preventing Tool bending• Good Performance for Shouldering Applications
Y-Coated /4 FLUTE
Y-Coated /5 FLUTE
TiAlN-Coated /Roughing
THE FIRST CHOICE FOR PRE-HARDENED STEELS (-HRc55)
Y-Coated Solid Carbide End Mills for Die & Mold Industries
• Large product line with various sizes & shapes• Edge preparation preventing chipping, achieving excellent
finish, and longer tool life in high-speed cutting • Unequal index & multiple helix exclusively designed
to reduce vibration and also to achieve excellent chip evacuation
FEATURES & BENEFITS• Square Ø 0.1mm - Ø 25mm (.004 - 1")• Corner Radius Ø 0.2mm - Ø 20mm (.008 - 3/4") • Ball Nose Ø 0.1mm - Ø 25mm (.004 - 3/4”)
RANGE
Optimal Edge Preparation
Ultra Micro grain - Nano Grain Carbide
Unequal Index & Multiple Helix Available on4G Mills, 4 Flute Multiple Helix End Mills
A1 A2
A2A1≠A2
A1
Y-Coated Solid Carbide End Mills for Heavy Cutting
• High volume cutting with excellent surface finish (heavy cutting)• Excellent on Stainless Steels, Mild Steels and Cast Iron• Unique flute and corner design for chip formation and longer tool life• Optimized coating for wear reduction and heat resistance• Great performance with trochoidal machining
FEATURES & BENEFITS
Unequal Index
High PerformanceCorner Geometriesincluding Chamfer
Multiple Helix Design
Premium GradeCarbide Substrate
YG-1 Tailor-made Coating
• Square Ø 3mm - Ø 25mm (1/8 - 1")• Corner Radius Ø 3mm - Ø 25mm (1/8 - 1")• Ball Nose Ø 3mm - Ø 25mm (1/8 - 1")
RANGE
35˚ / 37˚ Helix
4 Flute
45˚ Helix
6 Flute 4 Flute Ball Nose
35˚ / 37˚ Helix
HEAVY CUTTING APPLICATIONS (-HRc40)
2 FluteBall Nose
2 FluteExtended neck
2 FluteCorner RadiusExtended neck
4 FluteCorner Radius Extended neck
2 FluteBall Nose
Extended neck
4 Flute Extended neck
▶ What's New!!You can find new items with Shank Diameter 6mm and less in these types as below;
Special Chip Splitter DesignShorter Chip Length at high axial machining, improving chip removal from both the component and the machine
Chip Splitters
6 Flute Chip Splitters
Launching Jan of 2020
MILLING TOOLS MILLING TOOLS
4 www.yg1.kr 5www.yg1.kr
TOOL SOLUTIONS FOR INDUSTRIES
EXCELLENT PRODUCTIVITY BY REDUCING TOOL SET-UP TIME
HIGH PRECISION CUTTING WITH COST EFFICIENCY
Modular Type, Y-Coated Exchangeable Carbide Heads for Pre-Hardened Steels with both Carbide & Steel Holders
• Reduces 1/10 of the time spent to change tools than conventional solid tools
• Outstanding cutting abilities and wear resistance made from advanced coating and geometry
• Multiple helix applied to minimize vibration when cutting
FEATURES & BENEFITS
• Square Ø 10mm - Ø 32mm (3/8 - 1-1/4")• Corner Radius Ø 10mm - Ø 32mm (3/8 - 1-1/4")• Ball Nose Ø 10mm - Ø 32mm (3/8 - 1-1/4")
RANGE
Coated Exchangeable Carbide Inserts with both Carbide & Steel Holders for Various Materials
-Xmill
• Re-generation(holder) service• For General Purpose, Pre-Hardened Steels, High-Hardened Steels,
Stainless Steels and Graphite• Ball Nose, Corner Radius, Full Radius and also high feed types available• Holders available in both Carbide & Steel• Long tool life with high wear resistance• Increased precision by tightening the tolerance and grinding the
internal Screw hole of holders and Inserts
FEATURES & BENEFITS• Ball Ø 8mm - Ø 33mm (5/16 - 1-1/4") • Corner Radius Ø 8mm - Ø 33mm (5/16 - 1-1/4")
RANGE
- SMART
COMPOSITE MATERIALS
Taper Neck ShankStraight Neck Shank
Tool set-up time per piece
Changing conventional Solid End Mills
Changing modular heads
About 10 minutes
About 1 minute
Steel Ball Holders
Carbide Corner Radius Holders
Steel Corner Radius Holders
Carbide Ball Holders
For High-Hardened Steels(XMB260T, XMR260T)
For General Purpose(XMB110A, XMR110A)
For Pre-Hardened Steels(XMB120C, XMR120C)
For Graphite / Diamond Coated(XMB110D, XMR110D)
Full Radius(XMM110V)
High Feed Insert(XMF110V)
For Stainless Steel (XMB130A, XMR110A)
HIGH PERFORMANCE END MILLS FOR ALUMINUMHIGH FEED, HIGH RPM and HIGH CHIP REMOVALDLC-Coated & Non - Coated Solid Carbide End Mills for Aluminum Alloy, Non-Ferrous & Non-Metallic Materials
• Designed for Aluminum Alloys used in Aerospace industries• Special geometries applied to control weight balance for quality
performance on higher RPM making an excellent surface finish through stable machining
• High corner protection made from special shape and rake angle inside the radius
• Excellent performance with high feed, high RPM, high chip removal(heavy cutting)
FEATURES & BENEFITS
ALU-POWER HPC
Engineered Flute Design Effective chip evacuation at high feed rates with lower cutting forces than competitive products
Ideal Symmetrical Shape• 3 Flute design “To the center” - all 3 flutes come to center
• Designed with high spindle speeds in mind
• Highly effective in plunging and helical ramping
Cylindrical Land• Increased performance over a variety of cutting conditions
• Helps in reduction of vibration and chatter
Long Reach Neck Tools Available • Variable lengths of necks for deep pockets and long reach processing
• Short flute length for higher rigidity
Tough Micro - Grain Carbide Material Provides edge strength and unsurpassed tool life
RANGE
TYPE(SERIES)SIZE RANGE
INCH METRIC3 Flute Square Ø 1/8~1 Ø 3~25mm3 Flute Square with Neck Ø 1/4~1 Ø 6~20mm3 Flute Corner Radius Ø 1/8~1(R.010~.250) Ø 6~20mm (R0.3~4mm)3 Flute Corner Radius with Neck Ø 1/4~1(R.010~.250) Ø 6~20mm (R0.3~4mm)
※ Available in Non-coated & DLC coated items
DLC COATED
Diamond Coated Compression Routers• The unique flute structure provides good surface finish, longer tool life and requires less cutting force• Reduces delamination and fibers pullout• Roughing and finishing processes• Diamond coating with excellent abrasion resistance
Diamond Coated Chip Breaker Routers
Solid Carbide Drills
• The unique flute structure provides good surface finish, longer tool life and requires less cutting force• Reduces delamination and uncut fibers• Roughing and finishing processes• Multiple flute • Diamond coating with excellent abrasion resistance• Fine nick type
A combination of perfect carbide choice with innovative design and adapted CVD coating make YG-1 CFRP drills a good choice for Composite drilling
Slotting Side Milling Plunging, Pocketing
End Teeth Type
No End CutType 1
Burr EndType 2
End Mill EndType 3
Drill EndType 4
COMPOSITEMATERIALS
TOOL SOLUTIONS FOR INDUSTRIES
Scan QR Code to See More Tools for COMPOSITE METERIALS
MILLING TOOLS MILLING TOOLS
6 www.yg1.kr 7www.yg1.kr
P Steel
Hard
Tough
YG1001 High hardness grade for Best Productivity
YG3010 First choice for Finishing Steels
YG3020 Balanced grade between Hardness and Toughness
YG3030 High toughness grade for Heavy Interrupted cut
M Stainless
Steel
Hard
Tough
YG211 High wear resistance grade for Stainless Steel
YG3030 CVD Grade for high speed cutting on STS
YG213 First choice of general stainless steel application
YG214 High toughness grade for Unstable Machining
K Cast Iron
ISO K10 YG1001 First choice for Grey Cast Iron
ISO K15 YG3010 First choice for Ductile Cast Iron
N Non-
ferrous Metals
DLC YG100 DLC Coated grade for High alloyed Aluminum
Uncoated YG10 Uncoated grade for General Aluminum application
Cast ironSpeed
Feed
YG1001
YG3010
Non-ferrous MetalsSpeed
Feed
YG10
YG100
SteelsSpeed
Vcm/min.
(inch/min.)
FeedFn
mm/rev.(inch/rev.)
220(720)
YG3010
YG1001
YG3020
YG801
YG3030
SpeedStainless steels
Feed
YG3030YG211
YG214
YG213
FinishingRoughing
-UF For Finishing
-UL Semi-Finishing and Sticky Materials
-UM Medium (for Unstable Condition)
-UG Medium (for Stable Condition)
-UC Medium Roughing
-UR Roughing and Heavy Interrupted Cut
FinishingRoughing
-MF Finishing
-MM Medium
-MR Roughing
Chipbreakers for Steel Chipbreakers for Stainless steelStable
Unstable
-UC Medium Roughing
-UR Roughing and Heavy Interrupted Cut
..MA Cast Iron Heavy Roughing (Flat type)
-KR Cast Iron heavy Roughing (Big K-land)
Chipbreakers for Cast iron
-AL From Roughing to Finishing
Chipbreakers for Non-ferrous Metals
Steels
UR
UC
6(.24)
4(.16)
2(.08)
Fnmm/rev.
(inch/rev.)0.2 0.4 0.6
Apmm
(inch)
UL
UF
UM
UG
(.008) (.016) (.024)
6(.24)
4(.16)
2(.08)
Fn
Ap Stainless steels
MF
MR
MM
(.008) (.016) (.024)0.2 0.4 0.6
Cast iron..MA
6(.24)
4(.16)
2(.08)
UR
UC
KR
(.008) (.016) (.024)Fn
Ap
0.2 0.4 0.6
Non Ferrous Metals
AL
6(.24)
4(.16)
2(.08)
(.008) (.016) (.024)Fn
Ap
0.2 0.4 0.6
ISO Turning – GradesOptimized ISO Turning Grades to Boost Up Your Productivity from Interrupted Cut to Continuous Cut
ISO Turning – ChipbreakersOptimized ISO Turning Chipbreakers to Boost Up Your Productivity from Roughing to Finishing
INDEXABLE TOOLSINDEXABLE TOOLS
8 www.yg1.kr 9www.yg1.kr
INDEXABLE TOOLSINDEXABLE TOOLS
GRADES
Optimal PVD Coating for Milling application
Micro grain size carbide • Multi-Purpose Grade with optimal thermal resistance & added strength• Sub-micron substrate designed for demanding application
YG602 P M K S
for Milling
Optimal PVD Coating for Milling application
Micro grain size carbide • High adhesive strength and toughness between the substrate and coating layer• Sub-micron substrate designed for demanding application
YG622 P K
for Milling
PRODUCT LINE
CHIPBREAKERS
–AL• For Aluminum• Very Sharp Geometry
–ST• For Stainless Steel, Super Alloy• Sharp Geometry
General Inserts(GN)
• First Choice for General Application
–TR• For Hardened Steel• Reinforced Geometry
...W / ...N • For Hardened Material and Cast Iron
SNMX8 Corner NegativeØ 50mm ~ Ø 100mm
ONMU16 Corner Negative
Ø 63mm ~ Ø 315mm
SDMT4 Corner
Square High FeedØ 32mm ~ Ø 100mm
APKT-TR, ST, AL2 Corner Positive
APKT 10 : Ø16mm ~ Ø 100mmAPKT 16 : Ø25mm ~ Ø 200mm
Chipbreakers
Grade
Optimal PVD Coating for Drilling application
Micro grain size carbide
Parting & Groove
Universal grade for General Drilling Application• Ultra Dense PVD Coating with optimal thermal resistance & strength
• Sub-Micron substrate designed for demanding application
YG602 P20 - P35 M20 - M40 K20 - K40 S15 - S25
TD. SeriesTDN TDP TDY
2, 3, 4
PRODUCT LINE
PRODUCT LINE
Popular 3 corner drill insertWCMX 04/05/06/08Diameter Ø 20mm ~ Ø 60mm
WCMX SeriesEconomic 4 corner drill insertSPMX 05/06/07/09/11/14Diameter Ø 13mm ~ Ø 50mm
SPMX Series
-PTDP
13°
• Parting & Grooving (Positive)
-NTDN
• Parting & Grooving (General)
-YTDY
• Groove Turn
YG-1 MillingVarious Insert Milling Series to Meet Your Tooling Needs from Shoulder Milling to High Feed Milling
Parting & Groove Turn Universal Easy-to-Choose Parting & Groove Turn Insert Grade for Various Application
YG-1 Drilling Universal Easy-to-Choose Drilling Insert Grade for Various Kinds of Material
YG-1 MillingVarious Insert Milling Series to Meet Your Tooling Needs from Shoulder Milling to High Feed Milling
10 www.yg1.kr 11www.yg1.kr
DREAM DRILLS - HIGH FEED
INCREASE YOUR PRODUCTIVITY UP TO 2 TIMES HIGHER
H- Coated 3 Flute Solid Carbide Drillswith Coolant Holes for Faster Drilling on Steels and Cast Iron
• Ø 5mm - Ø 20mm (.1969"-.7874")• Drill Depth: 3xD, 5xD
RANGE• For Carbon Steels, Alloy Steels (-HRc35), Cast Iron• Increases productivity due to 1.5 to 2 times faster feeding speed than
2 flute drills• Multi-layered coating delivers outstanding productivity and reliability
FEATURES & BENEFITS1200
1000
800
600
400
200
0
(Holes)
1000
800
600
400
200
0
(Holes)
600
500
400
300
200
100
0
300
250
200
150
100
50
0
(Holes) (Holes)
Pro
ductiv
ity
Pro
ductiv
ity 1,592 mm/min.
1.4 times UP
1,114 mm/min.
Ø 6.0 5xD
1200
1000
800
600
400
200
0
(Holes)
1000
800
600
400
200
0
(Holes)
600
500
400
300
200
100
0
300
250
200
150
100
50
0
(Holes) (Holes)
Pro
ductiv
ity
Pro
ductiv
ity
1.6 times UP
1,600 mm/min.1,003 mm/min.
Ø 10.0 5xD
PRODUCTIVITY (Carbon Steel)
Radius Thinning
3-Cutting Edges & Margins
FAST AND STABLE DRILLING FOR A WIDE VARIETY OF APPLICATIONS
X-Coated(2XD), TiAlN Coated(5XD), Micro Grain Flat Bottom Solid Carbide Drills (180˚point angle) for Drilling a Variety of Contoured and Sloped Surfaces
DREAM DRILLS - FLAT BOTTOM
• 180 degree point angle enables drilling of horizontal and sloped surfaces.
• Excellent chip evacuation by optimized flute shape.• High strength cutting edge to improve tool life.• Can be used in a variety of drilling applications.
FEATURES & BENEFITS• Ø 3mm - Ø 20mm (.1181"-.7874")• Drill Depth: 2XD, 5XD
RANGE
Inclined Entry Guide Drilling
Curved Surface
Inclined Exit Cross Drilling
Chained Hole
Counter Boring
Thin Plate Blind Hole for Threading
Internal Cooling Holes
High Strength Cutting Edge
180 Degree
180 Degree
Chamfer
2XD 5XD
High Strength Cutting Edge
Double MarginHole straightness and roundness provide good alignments
COST EFFICIENT HIGH PERFORMANCE EXCHANGEABLE DRILLING TOOLS
H- Coated Carbide Inserts and Premium Steel Holders
• For Carbon Steels, Alloy Steels and Cast Iron• Secure and quick clamping system• High performance with cost efficiency• Multi-layered coating delivers outstanding productivity and reliability
FEATURES & BENEFITS
• Ø 10mm - Ø 33.73mm (.3937"-1.3281")• Holder Length: 3xD, 5xD, 8xD
RANGE
Cylindrical shank with a parallel flataccording to ISO9766Plain shank and Whistle notch shankare available on request
Body Clearancefor elimination undesirable contact with work piece
Ground bright finished shankfor more precise clamping
Internal cooling channel for higher drilling performance
Optimized flute shapefor better chip evacuation
Torx Plus Screwfor clamping insert
Nickel-plated Steel holderfor corrosion resistance and wear resistance
Optimized Point Geometry of i-One Drills Ensures Centering Ability and Smoother Cutting
Multi-layered "H"-coated Micro Grain
Carbide Insert
- ONE DRILL
FOR DEEP HOLE DRILLING WITHOUT PECKING OPERATION
DREAM DRILLS - MQL
• Optimized Special Flutes are ideal for Outstanding Chip Removability and productive Drilling
• Upgraded TiAlN Nano Layer Full Coating• Compatible with the MQL(Minimum Quantity Lubrication) System• For Carbon Steels, Alloy Steels, Pre-Hardened Steels and Cast Iron
FEATURES & BENEFITS
RANGE
Higher Productivity than Conventional HSS Deep Hole Drills
Tolerance h6
DIN 6535 HAK
4-Facet point for good centering capability
Tolerance h7
Polished flute for enhanced chip
evacuation
* Drilling Depth 35xD(Ø3~Ø6), 40xD(Ø3~Ø6) are Special Series
10XD
15XD
20XD
10XD
15XD
20XD
25XD
30XD
[Ø3~Ø14]
[Ø3~Ø12]
[Ø3~Ø12]
[Ø3~Ø14]
[Ø3~Ø12]
[Ø3~Ø12]
[Ø3~Ø10]
[Ø3~Ø8]
End
Mill
Sha
nk
HOLEMAKING TOOLS HOLEMAKING TOOLS
12 www.yg1.kr 13www.yg1.kr
3 TIMES FASTER THAN NORMAL TAPS
▶ PRODUCTIVITY Up to 3 times Faster in tapping compared to conventional taps (General Steel)
Prod
ucti
vity
Cost
Prof
it
Synchro Tap
General Tap
30~45 m/min.
3 Times Faster
10~20 m/min.
Spira
l Flu
te
Spira
l Poi
nt
Stra
ight
Flu
te
Cold
For
min
g• Spiral Flute M3 - M20 (#4-3/4")• Spiral Point M3 - M20 (#4-3/4")• Straight Flute M3 - M20 (#4-3/4")• Cold Forming M3 - M12 (#4-1/2")
RANGE
• High productivity by high-speed machining• Shorten thread length and higher thread reliefs• Close tolerance concentricity eliminating oversized threads
FEATURES & BENEFITS
TiAlN, TiN-Coated HSS-PM Taps for High-Speed Tapping on Rigid CNC Machines
Prevents Chip Packing by Applying Short Thread Length and High Spiral Angle
Reduces Chattering by Tight Shank Tolerance
Compared to Normal Taps
GENERAL USE FOR VARIOUS MATERIALS
Bright, Steam Tempered, TiAlN, TiN-Coated HSS-E Taps for Multi-Purpose
Combo Tap’s geometry provides enough flute space resulting in smooth chip evacuation and therefore a continuous production process. Guarantee a high level of process reliability even under unfavorable conditions.
• For Steels, Stainless Steels, Cast Iron and Non- Ferrous Materials
• Prevents over & under feeding by its optimized flank geometry
• Constant threading quality preventing oversized threading
FEATURES & BENEFITS
• Spiral Flute M2 - M30 (#4-1")• Spiral Point M2 - M30 (#4-1")
RANGE
Spiral Flute Taps
PATENTED
Spiral Point Taps
HYDRAULIC CHUCK
TOOLING SYSTEM
Milling High Speed Cutting Fine Drilling
ReamingTapping &
Tread Milling Chamfering
Milling High-Speed Cutting Fine Drilling
Reaming Tapping & Thread Milling Chamfering
APPLICATION
Superb T.I.R. Accuracy & Repeatability≤ 0.003mm (Direct Clamping)
Basic G2.5 25,000 RPM Balanced
Excellent Vibration Damping • To increase tool life• For better roughness• For better accuracy
Vacuum Filling System for injection of 100% purehydraulic oil guaranteeing stable torque power
Various Size of Reduction SleeveØ 3mm - Ø 25mm
Superb T.I.R Accuracy≤ 0.003mm
Basic Balancing GradeMin. G2.5/25,000rpm
Strong Torque PowerMin. 18Nm ~ 550Nm
Standard and Slim Design• Standard 4.5° • Slim 4.0°• Extra Slim 3.0°
SHRINK FIT HOLDER
TOOL HOLDERSTHREADING TOOLS
MEMO
*
BRAZIL
CANADA
COLOMBIA
MEXICO
UNITED STATES
AMERICAS
EGYPT
SOUTH AFRICA
AFRICA
BELGIUM
CROATIA
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALY
LITHUANIA
NORWAY
POLAND
PORTUGAL
ROMANIA
RUSSIA
SERBIA
SLOVENIA
SPAIN
SWEDEN
SWISS
THE NETHERLANDS
TURKEY
UNITED KINGDOM
EUROPE ASIA PACIFICAUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
IRAN
ISRAEL
JAPAN
MALAYSIA
PAKISTAN
PHILIPPINES
SINGAPORE
SOUTH KOREA
TAIWAN
THAILAND
UNITED ARAB EMIRATES
VIETNAM
C
M
Y
CM
MY
CY
CMY
K
��∏± º”¡� π◊ ≪�ø〈¡�ª� ¡§∫∏.pdf 1 2018. 3. 23. 오전 10:35
MEMO
*
BRAZIL
CANADA
COLOMBIA
MEXICO
UNITED STATES
AMERICAS
EGYPT
SOUTH AFRICA
AFRICA
BELGIUM
CROATIA
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALY
LITHUANIA
NORWAY
POLAND
PORTUGAL
ROMANIA
RUSSIA
SERBIA
SLOVENIA
SPAIN
SWEDEN
SWISS
THE NETHERLANDS
TURKEY
UNITED KINGDOM
EUROPE ASIA PACIFICAUSTRALIA
CHINA
HONG KONG
INDIA
INDONESIA
IRAN
ISRAEL
JAPAN
MALAYSIA
PAKISTAN
PHILIPPINES
SINGAPORE
SOUTH KOREA
TAIWAN
THAILAND
UNITED ARAB EMIRATES
VIETNAM
C
M
Y
CM
MY
CY
CMY
K
��∏± º”¡� π◊ ≪�ø〈¡�ª� ¡§∫∏.pdf 1 2018. 3. 23. 오전 10:35
* For the more information on sales network, please contact the head o�ce as below;
YG-1 HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909 e-mail : [email protected] www.yg1.kr
HIGH QUALITY PRODUCTS and forON TIME DELIVERY
Since 1982, YG-1 has been committed to quality, innovation and the unique customer experience. Our performance and experience have granted YG-1 the global impression of one of the leading manufacturers of high quality cutting tool solutions. This global footprint expands over 75 countries, with international logistic centers, pledging to our customers to give the best service available today - and tomorrow.
BELGIUM FINLAND ITALY THE NETHERLANDSPORTUGAL SLOVENIA
DENMARK HUNGARY POLAND SERBIA SWISS
CZECH REPUBLIC GERMANY NORWAY RUSSIA SWEDEN UNITED KINGDOM
CROATIA FRANCE LITHUANIA ROMANIA SPAIN TURKEY
EUROPE
HONG KONG TAIWANISRAEL PAKISTAN
INDIA THAILANDJAPAN PHILIPPINES
CHINA SOUTH KOREAIRAN MALAYSIA VIETNAM
AUSTRALIA SINGAPOREINDONESIA UNITED ARAB EMIRATES
ASIA PACIFIC
CANADA UNITED STATESBRAZIL MEXICOCOLOMBIA
AMERICAS
SOUTH AFRICAEGYPT
AFRICA
* For the more information on sales network, please contact the head o�ce as below;
YG-1 HEAD OFFICE 211, Sewolcheon-ro, Bupyeong-gu, Incheon, South KoreaPhone : +82-32-526-0909 e-mail : [email protected] www.yg1.kr
HIGH QUALITY PRODUCTS and forON TIME DELIVERY
Since 1982, YG-1 has been committed to quality, innovation and the unique customer experience. Our performance and experience have granted YG-1 the global impression of one of the leading manufacturers of high quality cutting tool solutions. This global footprint expands over 75 countries, with international logistic centers, pledging to our customers to give the best service available today - and tomorrow.