bermad waterworks
TRANSCRIPT
i n f o @ b e r m a d . c o m • w w w . b e r m a d . c o mThe information herein is subject to change without notice. BERMAD shall not be held liable for any errors. All rights reserved.© Copyright by BERMAD. PC7WE00 04
BERMAD Water Control Solutions
BERMADPetroleum
BERMADFire Protection
BERMADGardening
BERMADAgriculture
BERMADWaterworks
stu
di[
o]z With representation on every continent and across some 86 countries,
BERMAD is an undisputed world leader in control valves, maintaining
broad training and parts distribution networks all over the globe.
Wherever your location, BERMAD is there.
BERMAD International Head Offices:
• BERMAD Australia
• BERMAD Brazil
• BERMAD Chile
• BERMAD China
• BERMAD Colombia
• BERMAD Italy
• BERMAD Mexico
• BERMAD Peru
• BERMAD UK
• BERMAD USA
i n f o @ b e r m a d . c o m • w w w . b e r m a d . c o m
BERMAD Worldwide
America • Europe • Asia • Australia • Africa
W a t e r C o n t r o l S o l u t i o n s
BERMAD Waterworks700 & 800 SeriesHydraulic Control Valves
Managing the world’s most precious resources
International Standards and Approvals:
SIISO 9001
Qu
al
it
yA s s u r e
dF
ir
m
1
Founded in 1965, BERMAD knows the value of a single drop of water and howbest to reap its full advantage. Today BERMAD serves global customers in a widerange of fields, anywhere in the world.
BERMAD – Provider of SolutionsCombining its expertise, leading-edge technology and precision engineering,BERMAD provides customized solutions for the control and management ofwater/fluid treatment and supply.
Waterworks – National, regional and municipal distribution networks, high-risebuildings and luxury hotels, water systems at industrial facilities, power stations.
Fire Protection – Factories and industrial yards, high-rise and public buildings, hazardous zones atoil and gas facilities, power plants, off-shore installations, aviation and marine environments, refineries.
Petroleum – Petroleum distribution terminals, tank farms.
Irrigation – Main networks for agricultural projects, purified waste water projects,central control-head and infield networks, greenhouses, commercial and residential gardening.
Water metering – Bulk in water supply systems, domestic water metering, remote read-out capabilities,pre-payment systems.
Efficiency and Quality – BERMAD’s Core CompetenciesBERMAD’s workforce of over 450 includes a high proportion of skilled personnel. Computerized systems(Oracle ERP) enable full control and management at all levels of production, marketing and shipment, whileensuring rapid turnaround and always-on-schedule delivery. Strict Quality Assurance keeps BERMAD incompliance with ISO 9001-2000 and a range of international quality and ecology standards.
BERMAD – A Worldwide PresenceWith 9 subsidiaries throughout the world, and operations in over 80 countries on 5 continents, BERMADhas a formidable global presence. Its worldwide customer training facilities and parts distribution networksensure uninterrupted customer service anywhere in the world.
Precision Engineering – A BERMAD CommitmentComprehensive fluid management systems are only as effective as their smallest component. That’s whyBERMAD systems are based on components designed, developed and manufactured in-house, with theability to adapt solutions to any customer need; constantly integrating the latest, most reliable manufacturingtechniques, and providing every customer with the most comprehensive commercial and technical supportin the world.
BERMAD - a global leader in managing the world’s most precious resources
Groupe
USA United Kingdom Germany*(in Process)
Russia France Austria Belgium
BERMAD WaterworksAbout Bermad
Main areas of activity include:
2
BERMAD 700 & 800 Series,Control Valves for Waterworks & Industrial Applications
At the heart of BERMAD’s waterworks activities, covering every water supply and distribution system application, is the BERMAD700 Series line of control valves and its high-pressure version, the 800 Series. Developed by BERMAD's creative engineeringand based on cutting-edge technologies, these Series offer a variety of control features from pressure reducing, relief andsustaining; through level, pump, surge, flow and burst control; to solenoid and electronic control. Optimally designed andexpertly integrated by BERMAD engineers into systems providing just the right models and configurations, the BERMAD 700& 800 Series control valves meet every national, regional, and municipal water supply need, as well as the special needs ofindustrial facilities, high-rise and public buildings, and luxury hotels.
For National, Regional and Municipal Distribution Networks, system design and operation starts with careful examinationof expected flow and pressure ranges, the parameters that determine major system components, including pump stations,reservoirs, supply lines, water treatment plants and desalination systems. These components are then integrated into pressurezones with leakage reduction means, to ensure a continuous, reliable and smooth supply of waterthrough an efficient and cost-effective network.
For Industrial Facilities, a reliable, uninterrupted supply of water is vital. When production processes rely on a high flow ofhigh-quality water at a constant flow and temperature, any interruption or deviation can be devastatingly costly. Where firehazards are in close proximity to workers, expensive equipment, or residential areas, absolutely reliable large-scale, self-supply,backup systems are a must.
BERMAD Waterworks
3
High-Rise Buildings have unique requirements, which must be taken into accountwhen designing and installing their water supply and distribution systems.BERMAD solutions give careful consideration to issues such as:■ While single source supply is common, supply cut-off is unacceptable.■ Water damage in a high-rise building can be extremely costly.■ Valves are often located in close proximity to prestigious residential and office space.■ The main supply line is exposed to increasingly high head at lower zones.■ A multiplicity of systems requires integration and control.■ Maintenance personnel are not always skilled with control valves.
BERMAD is a world leader in its field with major market shares in North and South America, Europe, Asia, Africa, and Australia.The breadth of BERMAD’s activities, through its subsidiaries, representatives and customers, allows us to stay close to ourmarkets, continuing to increase and develop one of our most important assets - the accumulated know-how covering a rangeof systems, applications, and ideal solutions customized to every need.
This catalogue is intended to be a useful working tool for project investors, consulting engineers, construction supervisors,installation contractors, and maintenance personnel.
Luxury Hotels have all the special requirements of high-rise buildings,with the additional requirement of catering to high-water-consumptionfacilities such as jacuzzis, spas, swimming pools, artificial waterfallsand fountains. These systems typically handle aggressive water withcorrosive materials, while needing to operate very accurately underlow-pressure conditions. Any system failure is a breach of customerservice, which in the hospitality industry is totally unacceptable.
All the above systems require a multitude of valves with a variety of control features, construction materials and pressure ratings.BERMAD’s double-chambered 700 and 800 Series control valves are built from optimal materials to provide long-term operatingreliability under extremes of pressure, while allowing easy inline maintenance. The culmination of BERMAD’s experience andknow-how, the 700 and 800 Series ensures a smooth and reliable water supply, with efficient and integrated system operationbacked by BERMAD’s professional engineering support.
BERMAD Waterworks
The basic Model 700/705 diaphragm-actuated and the 800/805piston-actuated valves are hydraulically-operated, globe valves in eitherthe standard oblique (Y) or angle pattern design. Each valve comprisestwo major components: the body-seat assembly and the actuatorassembly.
The actuator assembly is unitized and is removable from the body asan integral unit. It consists of both an upper and a lower control-chamber.Each basic valve can easily be configured, on-site, either as asingle-chamber control valve (Model 705/805), or a double-chambercontrol valve (Model 700/800). The shaft sub-assembly, in both singleand double-chambered versions is center-guided, providing anunobstructed seat area.
The Model 700/800 Basic double-chambered valve operation isindependent of valve differential pressure since the line pressure actuallyserves as the actuator differential pressure. This develops maximumpower, ensuring immediate valve response. The upper control-chamberis pressurized to close, and vented to open the valve. The lower control-chamber is usually vented to the atmosphere, but can also be pressurizedto power the valve open.
The Model 705/805 Basic Valve uses valve differential pressure to powerthe actuator open or closed. The lower control-chamber, which servesto cushion the closing of the valve, is exposed to the downstreampressure, through a fixed orifice connected to the downstream side ofthe valve. The pressure in the upper control-chamber varies, usuallyresulting from the combined action of a regulating pilot and a fixedorifice. This varying pressure modulates the valve to open or close.
The Basic Hydraulic Valve is available in a wide range of materials, sizes,pressure ratings, and end connections. Single or double-chamberedversions are used as the main valve in all 700 and 800 Series applications.
Basic Valve
4
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Diaphragm Actuated Valve
Piston Actuated Valve
BERMAD 24”, 28”, 30”, 32” 700 Series Control Valves are hydraulically operated,diaphragm actuated globe pattern valves. The valve is comprised of two majorcomponents, the body assembly and the actuator assembly. The actuatorassembly is removable from the body as an integral unit. It consists of twocontrol chambers, an upper and a lower. The actuator can be converted on-sitefrom single to double-chambered actuator and vice-versa according to therequired control function.Servo-Check - the actuator can be equiped with an independent action,non-slam check feature.
Applications■ Large-scale pumping systems■ National and municipal distribution networks■ Reservoir and dam level control■ Large-scale industrial applications■ All 700 series applications: Pressure-reducing,
Pressure-sustaining, Level-control etc.
24”-32” (600-800 mm)
Large Diameter Hydraulic Control ValveThe Best of the Biggest
5
Large Diameter Hydraulic Control Valve
13,000 m3/h Pressure-Reducing & Sustaining Station
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
6
Closed PositionThe closed adjustable pilot valve trapsline pressure in the upper controlchamber. The resulting superior forcemoves the valve to the fully closedposition and provides drip-tight sealing.
Modulating PositionThe pilot valve senses line pressurechanges and opens or closesaccordingly. It controls the accumulatedpressure in the valve upper controlchamber, causing main valve tomodulate to an intermediate positionand maintain the preset pressure value.
Open PositionThe open pilot valve releases linepressure from the upper control chamber.The line pressure acting on both thelower control chamber and the seal-disk,moves the valve to the open position.
Modulating Mode
Powered Open PositionLine pressure is applied to the lowercontrol chamber as pressure in the uppercontrol chamber is vented. This, togetherwith the line pressure acting on theseal-disk, creates a force that powersthe valve to the open position.
On-Off Modes
Closed PositionLine pressure applied to the uppercontrol chamber of the valve creates asuperior force that moves the valve tothe closed position and providesdrip-tight sealing.
Open PositionDischarging the pressure in the uppercontrol chamber to atmosphere or someother lower pressure zone causes theline pressure acting on the seal-disk tomove the valve to the open position.
Pressure Reducing Models
Principle of Operation
* All text written above is valid for both 700 and 800 Series.
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
7
[1] - Double-Chambered Actuator■ Actuator assembly can be removed as one integral unit■ Simple on-site conversion to single-chambered■ Same valve body accepts both actuators (Diaphragm and Piston)
[2] - Diaphragm AssemblyThe flexible, unshaped, nylon-reinforced diaphragm is supported over the majority of its surface.Diaphragm load is limited to only the stretching forces applied to the active area.
[3] - Piston AssemblyVented lower chamber provides differential piston principle of operation and air cushioning. Constant active area togetherwith the sturdy construction and unobstructed long travel ensures stable and accurate regulation. The “shaft diameter”central guiding and the dynamic piston-seal reduce friction and jamming risk.
[4] - Cover PlugEnables on-site retrofit of:■ Indicator [4A]: For visual valve position indication■ Limit Switch: For signaling valve position.■ Position Transmitter: For analog transmission of valve position.
[5] - Inherent Separation PartitionThe inherent separation includes the bearing [5A], which provides complete central guiding for the valve moving assembly.The separation partition separates the lower control chamber from the flow in both the single-chambered, andthe double-chambered configurations.
[6] - SpringRequired for single-chambered configurations. Superfluous for double-chamberedconfigurations (unless check feature is required).
[7] - Seal Disc AssemblySelf-aligning, seal disk assembly provides balanced, free movement and a resilient seal for perfect, drip-tight sealing. It enables using several variations of seals and plugs for a wide range of applications and working conditions.
[8] - SeatStainless steel, raised, replaceable in-line and on-site.
[9] - Wide Body (“Y” or Angle pattern)Hydro-dynamically designed for efficient flow with minimal pressure loss and excellent resistance to cavitation. Full bore,valve port area clear of obstructions; no ribs or stem guides. Increases capacity by 25% over standard globe valves.
[10] - End ConnectionsConforms to pressure ratings and standards of: ISO, ANSI, JIS, BS, and others.
Valve Plug OptionsFlat disc“Quick opening plug”: Standard plug provides high flow and quickresponse.
Throttling PlugA throttling plug is used in order to provide more accurate, stableand smooth response for pressure and flow regulation while reducingnoise and vibration. Two types are available:“U” shape (standard) and “V” shape.
Product Features
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
8
[1]
[2][3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[5]
[7]
700 SeriesActuator
800 SeriesActuator
Product Features
[A4]
[5A]
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
9
Applications■ Flow and leakage reduction■ Cavitation damage protection■ Throttling noise reduction■ Burst protection■ System maintenance savings
Pressure-Reducing ValvesEstablishing various pressure zones is one of the most common means to achieve balance in water transmissionand distribution networks. Pressure-Reducing Valves (PRV) “force” the dynamic parameters of the supply systeminto a constant predetermined delivery pressure. “Active PRV”, through definition of minimum required pressureat each pressure zone’s critical point, enables continuous readjustment of delivery pressure. This allows thesystem to work at a lower average pressure.
Model 820
Model 720
The Model 820 piston-actuated Pressure-Reducing Valve enablesoperation at higher upstream pressures. It extends the pressure-rating rangeupper-limit to 40 bar (600 psi).
The Model 720 Pressure-Reducing Valve is a hydraulically operated,diaphragm-actuated, control valve that reduces higher upstream pressure tolower constant downstream pressure regardless of fluctuating demand or varyingupstream pressure.
Model 720
Model 820
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Note: see reduction ratio tabels at ordering guide pages 28&30
Model 820-PP
10
Applications■ Long downhill lines■ Serial pressure-reduction■ Leakage and burst protection■ High differential pressure systems■ Protection against cavitation damage■ Throttling noise reduction
The Model 720-PD Proportional Pressure-Reducing Valve is a hydraulically operated,diaphragm-actuated, control valve that reduces higher upstream pressure to lowerdownstream pressure at a fixed ratio.
The Model 820-PP piston-actuated Proportional Pressure-Reducing Valve enablesoperation at higher upstream pressures.It extends both the valve pressure-rating range upper-limit to 40 bar (600 psi) andthe reduction fixed ratio selection.
Model 720-PD
Model 720-PD
Model 820-PP
Proportional Pressure-Reducing ValvesHigh differential pressure along supply lines and across valves represent major problems in distribution systems.■ Serial pressure-reduction - Prevents downhill line from exceeding its pressure rating.■ Primary pressure-reduction - Protects second stage valves against cavitation damage and from high throttling
noise levels.Proportional Pressure-Reducing Valves provide an elegant, cost-effective and simple answer to these problems.
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Note: see reduction ratio tabels at ordering guide pages 28&30
Model 750-66-B
Applications■ Reservoir filling■ Very low supply-pressure■ Low noise generation■ Energy cost-critical systems■ Reservoir outlet-distribution routing
Level Control Valve with Float PilotFloat controlled valves combine the advantages of excellent hydraulic control valves with the simplicity of mechanicalfloats. The ability to separate the main valve from the float eliminates most of the installation and maintenanceproblems associated with mechanical float valves. The wide selection of floats types makes Float Control Valvesthe solution wherever level control is required.
The Model 750-66-B Level Control Valve with Bi-Level Vertical Float is ahydraulically-controlled, diaphragm-actuated, double-chambered control valve.The valve is hydraulically powered to fully open at pre-set reservoir low-level,and to shut off at a pre-set high level regardless of valve differential pressure.
11
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
12
Level Control Valve with Altitude PilotWater tanks, water towers, and existing reservoirs are some examples of places where level control is requiredbut arrangements for installation of a float pilot are complicated and expensive. For these reservoirs, the LevelControl Valves with Altitude Pilot saves the need for internal float installation, while retaining simplicity andreliability for a wide selection of applications.
Applications■ High-level reservoirs and water towers■ Energy cost-critical systems■ Systems with poor water-quality■ Inherent refreshing■ Level-sustaining at reservoir outlet
The Model 750-80-X Level Control Valve is a hydraulically-controlled,diaphragm-actuated, control valve that shuts off at a pre-set reservoir high-level andfully opens in response to an approximately one-meter (three-foot) level drop, as sensedby the 3-way altitude pilot mounted on the main valve.
Model 750-80-X (780-X)
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Model 740
Model 840
Model 840
Applications■ Isolation of pump start-and-stop effects from system, for:
❑ Solitary single speed pumps❑ Battery of single speed pumps (add and switch)❑ Battery of variable speed pumps (add)
13
Booster Pump Control ValvesPump Control Valves protect pumps, pipelines, and other system components by isolating the pipeline from thesudden velocity changes associated with pump starting and stopping. The “Active Check Valve” logic of operationis a pumping-system control method that prevents the system from experiencing surges rather than eliminating them.
The Model 740 Booster-Pump Control Valve is a hydraulically operated,diaphragm-actuated, active check valve that opens fully or shuts off in responseto electric signals. It isolates the pump from the system during pump startingand stopping, to prevent pipeline surges.
The Model 840 piston-actuated Booster-Pump Control Valve enables operationat high-pressure pumping systems. It extends the pressure-rating rangeupper-limit to 40 bar (600 psi).
Model 740
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
14
Surge Anticipating ValvesAbrupt pump stopping is followed by a pressure drop as the water column continues traveling along the line.The returning column hits the closed pump check valve, creating a high-pressure surge-wave, which travels atup to 4 Mach. Eliminating such a surge requires anticipation and pre-action. Surge Anticipating Valves react tothe pressure drop, accepting the returning column while already open, thus eliminating the surge.
Applications■ Eliminates surge for all pumping systems:
❑ Booster and deep well, single & variable speed■ Eliminates surge for all distribution networks:
❑ Municipal, high-rise buildings, sewage, HVAC, irrigation❑ Difficult to maintain, remote locations, older systems
Model 735-M
The Model 735-M Surge-Anticipating Valve is an off-line, hydraulically-operated,diaphragm-actuated valve. The valve, sensing line pressure, opens in response to thepressure drop associated with abrupt pump stoppage. The pre-opened valve dissipatesthe returning high pressure wave, eliminating the surge. The Model 735-M smoothlycloses drip-tight as quickly as the relief feature allows, while preventing closing surge.The valve also relieves excessive system pressure.
The Model 835-M piston-actuated Surge-Anticipating Valve enables operationat high-pressure pumping systems. It extends the pressure-rating range upper-limitto 40 bar (600 psi).
Model 835-MModel 735-M
Model 835-M
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
15
Applications■ Prioritizing pressure zones■ Ensuring controlled pipeline fill-up■ Preventing pipeline emptying■ Pump overload & cavitation protection■ Safeguarding pump minimum flow■ Excessive line-pressure protection
The Model 730 Pressure-Relief/Sustaining Valve is a hydraulically-operated,diaphragm-actuated, control valve that can fulfill either of two separate functions.When installed in-line, it sustains minimum pre-set, upstream (back-) pressureregardless of fluctuating flow or varying downstream pressure. When installedas a circulation valve, it relieves excessive line-pressure when above maximumpre-set.
Pressure-Relief/Sustaining ValvesPressure-Relief/Sustaining Valves protect pumps and water distribution systems from two extreme situations:■ When installed off-line, they relieve damaging excessive pressure■ When installed in-line, they sustain minimum back-pressure thus prioritizing pressure zones, preventing line
emptying, pump overload, etc.
Model 730
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Model 736
16
Applications■ Pump overload & cavitation protection■ Safeguarding pump minimum flow■ Emergency filter by-pass■ Balancing between circuits in HVAC systems
The Model 736 Differential-Pressure Sustaining Valve is a hydraulically- operated,diaphragm-actuated, control valve that sustains minimum pre-set, differential pressurebetween two points regardless of fluctuating flow or varying upstream pressure.
Differential-Pressure Sustaining ValveDifferential-Pressure (∆P) Sustaining Valves are well suited for:■ Pumps with varying suction pressure regimes that require constant ∆P as overload & cavitation protection.■ Filtration Systems upstream from firewater networks that require a bypass to progressively
compensate for excessive demand.■ Air Conditioning Systems with varying demands that require constant ∆P between distribution
and collection lines.
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Flow Control ValvesSystem design starts from expected flow range that determines pump-stations characteristics and location,supply lines layout and size, reservoirs location and volume, etc. Significant deviation from designed flow rangemight disrupt water supply or even damage system components. Appropriate design, placement, and use ofFlow Control Valves protect the system from excessive flow.
Applications■ Securing design specifications■ Prioritizing main system over sub-system■ Limiting consumers over-demand■ Maintaining pre-set maximum flow through filters■ Pump overload and cavitation protection
The Model 770-U Flow Control Valve is a hydraulically operated, diaphragm-actuated, control valve that maintains pre-set maximum flow, regardless offluctuating demand or varying system pressure.
17
Model 770-U
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
18
The Model 790-M Burst Control Valve is a hydraulically-operated, diaphragm-actuated,control valve that upon sensing flows in excess of setting, shuts off and locksdrip-tight, until it is manually reset. As long as flow is lower than the setting, the valveremains fully open, minimizing head-loss.
Burst Control ValveEvery water system is vulnerable to bursts, whether due to system hydraulic and installation problems or externalmechanical damage. Burst Control Valves isolate the damaged zone until manually reset, to minimize wastingof water, land erosion and the damage that can be caused to houses, roads and equipment.
Model 790-M
Applications■ Zonal shut-off at burst■ “Older” burst-susceptible networks■ Outlets from reservoir at earthquake risk■ Vulnerable network infrastructure facilities■ Networks liable to mechanical damage
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
The Model 710 Solenoid-Controlled Valve is a hydraulically-operated,diaphragm-actuated, control valve that either opens fully or shuts off inresponse to electric signals.For very low-pressure applications, refer to the Full-Powered Opening andClosing Model 710-B.
Solenoid-Controlled ValvesSolenoid-Controlled Valves, by using very low electric power, allow activation of on/off valves of all sizes savingthe infrastructures involved when applying motorized valves. The electric signal used to activate the solenoid canbe sent directly from timers, clocks, etc. or through a control system according to pressure, level, flow, qualityand other system management considerations.
Applications■ Network management optimizing■ Pressure-zone isolating■ Burst excess-flow shut-off■ Reservoir overflow safety back-up■ Switching between "on-duty" valves■ Automatic refreshing of reservoirs
Model 710
19
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Model 718-03
Applications■ Control pressure, flow, level, temperature, etc■ Flow control as a function of reservoir level■ Pressure control as a function of demand■ Flow control as a function of temperature in HVAC systems■ Mixture quality control in Mixing Junctions
Electronic-Control ValveElectronic-Control Valves combine the advantages of excellent modulating, line-pressure driven, hydraulic valveswith the electronic control world. In today's world of water supply - modern, dynamic and communication-intensiveelectronic control valves are needed for real-time control of pressures, flows, temperatures, levels, etc. both assingle variables, and as a function of each other.
20
The Model 718-03 Electronic-Control Valve is a hydraulically-operated,diaphragm-actuated, control valve that, in response to signals from an electroniccontroller, modulates open or closed to control pressure, level, flow, temperature and/orother parameters requiring control, according to the set values programmed into thecontroller. For very low pressure applications, refer to the full-powered opening andclosing Model 718-03-B.
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
21
Available Sizes & Patterns11/2” - 20” (40 - 500 mm) - Y and Angle24” - 32” (600 - 800 mm) - Globe
Connection StandardFlanged: ISO 7005-2 (ANSI B-16.42),Threaded: NPT or BSP 40, 50, 65 & 80 mm
Water TemperatureUp to 80ºC (180°F)
Working pressureISO PN 16: 16 bar Class #150: 250 psiISO PN 25: 25 bar Class #300: 400 psi
Standard Materials❑ Main valve body and cover
Ductile iron EN 1563 (ASTM A-536)❑ Main valve internals
Stainless steel and bronze❑ Control Trim
Brass components/accessoriesForged brass fittings & copper tubing
❑ ElastomersNBR (Buna-N)
❑ CoatingFusion Bonded Epoxy, RAL 5005 (Blue)NSF 61 and WRAS approvedor Electrostatic Polyester Powder, RAL 6017 (Green)WRAS approved
Optional Materials❑ Main valve body/internals
Carbon steel (ASTM A-216-WCB)Stainless steel 316 CF8M (316)AluminumNickel Aluminum BronzeTitaniumAlloy 20DuplexHastalloyMarine Bronze254 SMO
❑ Control TrimStainless steel 316Hastalloy C-276
❑ ElastomersEPDMViton
Technical Specifications
700 Series
Available Sizes & Patterns11/2” - 20” (40 - 500 mm) - Y Pattern11/2” - 18” (40 - 450 mm) - Angle
Connection StandardFlanged: ISO 7005-1 (ANSI B16.5),
Water TemperatureUp to 80ºC (180°F)
Working pressureISO PN 16: 16 bar Class #150: 250 psiISO PN 25: 25 bar Class #300: 400 psiISO PN 40: 40 bar Class #400: 600 psi
Standard Materials❑ Main valve body
Carbon steel (ASTM A-216-WCB)Ductile iron EN 1563 (ASTM A-536)
❑ Valve cover (piston cylinder)Bronze or stainless steel
❑ Main valve internalsStainless steel and bronze
❑ Control TrimBrass components/accessoriesForged brass fittings & copper tubing
❑ ElastomersNBR (Buna-N)
❑ CoatingFusion Bonded Epoxy, RAL 5005 (Blue)NSF 61 and WRAS approvedor Electrostatic Polyester Powder, RAL 6017 (Green)WRAS approved
Optional Materials❑ Main valve body/internals
Stainless steel 316 CF8M (316)AluminumNickel Aluminum BronzeeTitaniumAlloy 20DuplexHastalloyMarine Bronze254 SMO
❑ Control TrimStainless steel 316Hastalloy C-276
❑ ElastomersEPDMViton
800 Series
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
10 100 1,000 10,000
0.1
0.2
0.3
0.4
0.50.60.70.80.91.0
1
2
3
4
5678910
100 1,000 10,000
Rate of Flow - m3/h
Pre
ssure
Loss
- b
ar
Pre
ssure
Loss
- p
si
Rate of Flow - gpm
1.5"
2"
2.5"
3"
4"
6"
8"
10"
12"
14"
16"
18"
20"
28"
50 500 5,000
50 500 5,000
32"
24"
22
Flow Data
Where:Kv = Valve flow coefficient (flow in m3/h at 1bar Diff. Press.)Cv = Valve flow coefficient (flow in gpm at Diff. Press. 1psi)Q = Flow rate (m3/h ; gpm)∆P = Differential pressure (bar ; psi)Gf = Liquid specific gravity (Water = 1.0)
Valve flow coefficient, Kv or Cv
Cv = 1.155 Kv
Kv(Cv)=Q Gf
∆P
Y-PatternFlat Disc
Y-PatternU-Plug
AngleFlat Disc
AngleU-Plug
Valve Flow Coefficient
mm 40 50 65 80 100 150 200 250 300 350 400 450 500inch 1.5” 2” 2.5” 3” 4” 6” 8” 10” 12” 14” 16” 18” 20”
Kv 42 50 55 115 200 460 815 1,250 1,850 1,990 3,310 3,430 3,550
Cv 49 58 64 133 230 530 940 1,440 2,140 2,300 3,820 3,960 4,100
Kv 36 43 47 98 170 391 693 1,063 1,573 1,692 2,814 2,916 3,018
Cv 41 49 54 113 200 450 800 1,230 1,820 1,950 3,250 3,370 3,490
Kv 46 55 61 127 220 506 897 1,375 2,035 2,189 3,641 3,773 NA
Cv 53 64 70 146 250 580 1,040 1,590 2,350 2,530 4,210 4,360 NA
Kv 39 47 51 108 187 430 762 1,169 1,730 1,861 3,095 3,207 NA
Cv 45 54 59 124 220 500 880 1,350 2,000 2,150 3,580 3,710 NA
Flow Chart
G-PatternFlat Disc
mm 600 700 750 800inch 24” 28” 30” 32”
Kv 7,350 7,500 7,500 7,500
Cv 8,490 8,670 8,670 8,670
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
23
Dimensions & Weights
Flanged
Y Pattern
H
h
L
W
40205155782399.12051557823910
502101658324410.62101658324412.2
6522217895257132221859525715
802502001003052226420710531425
1003202231153663733525012737843
1504153201434927543332015950885
200500390172584125524390191602146
250605480204724217637480223742245
300725550242840370762550261859410
350733550268866381767570295893434
400990740300110884610247403251133900
4501000740319112794510307403571165967
5001100740358116796211367503891197986
ISO
PN 10
; 16
ISO
PN 20
; 25
mmLWhH
Weight (Kg)LWhH
Weight (Kg)
SI 700 Metric
Angle Pattern
W
H
h
LR
4012415578852279.5124165788522711
50124155838522710124165858522711.5
6514917895109251201491859510925113.5
8015220010010228121.515920710510928723
1001902221151273423520025012713535041
1502253201431524417123432015916545481
200265390172203545118277390191216558138
250320480204219633205336480223236649233
300396550248273777350415550261294796390
350400550264279781370419550293299801245
40045074029936910828004677403253861099855
45045074032037010828204677403583861099870
ISO
PN 10
; 16
ISO
PN 20
; 25
mmLWRhH
Weight (Kg)LWRhH
Weight (Kg)
700 & 800 Series, PN16 & PN25 Y Pattem ValvesLength according to EN 558-1
inch2”
21/2”3”4”5”6”8”
mm506580100125150200
mm230290310350400480600
Size inch10”12”14”16”18”20”
mm250300350400450500
mm730850980110012001250
SizeLEN LEN
* For Ordering, Specify according to Ordering Guide, End Connection window.
Angle Pattern
H
LR
h
W
5012112240832255.5
65140122481022427
801591635511529415
BSP
; NPT
mmLWRhH
Weight (Kg)
Y Pattern
L
W
H
Threaded
BSP
; NPT
mmLW
hH
Weight (Kg)
h
40155122
402015.5
50155122
402025.5
65212122
482098
80250163
5626417
* L is according to LEN.
W
L
H
h
G Pattern 60014501250470196532501500125047019653500
70016501250490198537001650125049019853700
75017501250520201539001750125052020153900
80018501250553204841001850125055320484100
ISO
PN 10
; 16
ISO
PN 20
; 25
mmLWhH
Weight (Kg)LWhH
Weight (Kg)
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Dimensions & Weights
24
SI 800 Metric
Y Pattern
L
ISO
PN 10
; 16
ISO
PN 25
; 40*
4020515678260N/A10.720515678260N/A11.8
5021016683265N/A1321016683265N/A15
6522219095278N/A1622219095278N/A18.4
80250200100327N/A28264210105332N/A32
100320229115409N/A48335254127422N/A56
15041528614352613594433318159542135106
200500344172650135162524382191666130190
250605408204763142272637446223783142307
300725484242942154455762522261961154505
350733536268969154482767590295996154549
40099060030011541911000102465032511791911070
450100063831911731911074103071435712081911095
50011007163581211191109611367783891241N/A
1129
H
h
P
W
mmLWhHP
Weight* (Kg)LWhHP
Weight* (Kg)
*Weight - For PN 40 and other cast-steel valves, multiply the weight by 1.024
Angle Pattern 401241567885252N/A10.71241507885252N/A11.8
501241668385252N/A131241558585264N/A15
6514919095109271N/A1614919095109271N/A18.4
80152200100102308N/A26159200105109315N/A30
100190229115127390N/A46200254127135398N/A54
15022528514315247614190234318159165491141101
200265344172203619141153277381191216632136179
250320408204219717156259336446223236733156292
300396496248273911156433415522261294930156481
350400528264279915156459419586293299935156523
400450598299369114419595046765032538611601951017
4504506403203701144195102046771635838611601951051
ISO
PN 10
; 16
ISO
PN 25
; 40*
mmLWRhHP
Weight* (Kg)LWRhHP
Weight* (Kg)
W
P
H
h
LR
*Weight - For PN 40 and other cast-steel valves, multiply the weight by 1.024
Control Chamber Displacement Volume
mm 40-65 80 100 150 200 250 300-350 400-500 600-800
Liter 0.125 0.3 0.45 2.15 4.5 8.5 12.4 29.9 98.0
Liter 0.04 0.12 0.3 1.1 2.3 4.0 8.0 18.7 -
Volume 700
Volume 800
Sizes
SI 700 & 800 Metric
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
US 700 English
Flanged
Y Pattern 11/2”8.16.13.19.4208.16.13.19.422
2”8.16.13.39.6238.36.53.39.627
21/2”8.37.03.710.1298.77.33.710.133
3”9.87.93.912.049
10.48.14.112.455
4”12.68.84.514.482
13.29.85.014.995
6”16.312.65.619.416517.012.66.320.0187
8”19.715.46.823.027620.615.47.523.7322
10”23.818.98.028.547825.118.98.829.2540
12”28.521.79.533.181630.021.710.333.8904
14”28.921.710.634.184030.222.411.635.2957
16”39.029.111.843.6186540.329.112.844.61984
18”39.429.112.644.4208340.529.114.145.92132
20”43.329.114.145.9212144.729.515.347.12174
ANSI
125 ;
150
ANSI
250 ;
300
inchLWhH
Weight (lb)LWhH
Weight (lb)
H
h
L
W
W
L
H
h
G Pattern 24”5749
18.577
71505949
18.577
7700
28”65491978
814065491978
8140
30”7049
20.579.385807049
20.579.38580
32”7349
21.880.690207349
21.880.69020
ANSI
125 ;
150
ANSI
250 ;
300
inchLWhH
Weight (lb)LWhH
Weight (lb)
Threaded
Angle Pattern 11/2”4.96.13.13.38.9214.96.53.13.38.924
2”4.96.13.33.38.9224.96.53.33.38.925
21/2”5.97.03.74.39.9445.97.33.74.39.930
3”6.07.93.94.011.1476.38.14.14.311.351
4”7.58.74.55.013.5777.99.85.05.313.890
6”8.912.65.66.017.41579.212.66.36.517.9179
8”10.415.46.88.021.526010.915.47.58.522.0304
10”12.618.98.08.624.945213.218.98.89.325.6514
12”15.621.79.810.730.677216.321.710.311.631.3860
14”15.721.710.411.030.781616.521.711.511.831.5540
16”17.729.111.814.542.6176418.429.112.815.243.31885
18”17.729.112.614.542.6180818.429.114
15.243.31918
ANSI
125 ;
150
ANSI
250 ;
300
inchLWRhH
Weight (lb)LWRhH
Weight (lb)W
H
h
LR
25
Dimensions & Weights
Angle Pattern 2”4.84.81.63.38.912
21/2”5.54.81.94.09.515
3”6.36.42.24.511.633
BSP
; NPT
inchLWRhH
Weight (lb)
H
LR
h
W
Y Pattern 11/2”6.14.8
1.67.912
2”6.14.8
1.68.012
21/2”8.34.8
8.28.218
3”9.86.4
2.210.437
BSP
; NPT
inchLW
hH
Weight (lb)L
W
H
h
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
Dimensions & Weights
26
US 800 English
Y Pattern
L
ANSI
150
ANSI
300
11/2”8.16.13.110.2N/A248.16.13.110.2N/A26
2”8.16.13.310.4N/A298.36.53.310.4N/A33
21/2”8.37.03.710.9N/A358.77.33.710.9N/A40
3”9.87.93.912.9N/A62
10.48.14.113.1N/A70
4”12.68.84.516.1N/A10613.29.85.016.6N/A123
6”16.312.65.620.75.320717.012.66.321.35.3233
8”19.715.46.825.65.335620.615.47.526.25.3418
10”23.818.98.0305.659825.118.98.830.85.6675
12”28.521.79.537.16.1
100130.021.710.337.86.1
1111
14”28.921.710.638.16.1
106030.222.411.639.26.1
1208
16”39.029.111.845.47.5
220040.329.112.846.47.5
2354
18”39.429.112.646.27.5
236340.529.114.147.67.5
2409
20”43.329.114.147.77.5
241144.729.515.348.97.5
2484
inchLWhHP
Weight* (lb)LWhHP
Weight* (lb)
H
h
P
W
*Weight - For ANSI 400 and other cast-steel valves, multiply the weight by 1.024
Angle Pattern 11/2”4.96.13.13.39.9N/A244.96.53.13.39.9N/A26
2”4.96.13.33.310.4N/A294.96.53.33.310.4N/A33
21/2”5.97.03.74.310.7N/A355.97.33.74.310.7N/A40
3”6.07.93.94.012.1N/A576.38.14.14.312.4N/A66
4”7.58.74.55.015.4N/A1017.99.85.05.315.7N/A119
6”8.912.65.66.018.75.61989.212.66.36.519.35.6222
8”10.415.46.88.024.45.633710.915.47.58.524.925.6394
10”12.618.98.08.628.26.157013.218.98.89.328.96.1642
12”15.621.79.810.735.96.195316.321.710.311.636.66.1
1058
14”15.721.710.411.036.06.1
101016.521.711.511.836.86.1
1151
16”17.729.111.814.545.07.7
209018.429.112.815.245.77.7
2237
18”17.729.112.614.545.07.7
224418.429.114
15.245.77.7
2312
ANSI
150
ANSI
300
inchLWRhHP
Weight* (lb)LWRhHP
Weight* (lb)
W
P
H
h
LR
*Weight - For ANSI 400 and other cast-steel valves, multiply the weight by 1.024
Control Chamber Displacement Volume
inch 11/2”-21/2” 3” 4” 6” 8” 10” 12”-14” 16”-20” 24”-32”
Gallon 0.04 0.08 0.12 0.57 1.19 2.25 3.28 7.88 25.9
Gallon 0.01 0.03 0.08 0.29 0.61 1.06 2.12 4.95 -
Volume 700
Volume 800
Sizes
US 700 & 800 English
BERMAD Waterworks700 & 800 Series
Hydraulic Control Valves
27
Ordering Guide
C6”WW 720 55 Y
Construction Materials Code
Ductile Iron - Standard CCast Steel SSt. Steel 316 NNickel Aluminum Bronze UOther materials available on request.
Pattern Code
Oblique (up to 20”) YAngle (up to 18”) AGlobe (24-32” only) G
BERMAD Waterworks700 Series
Size
11/2” 40 mm2” 50 mm21/2” 65 mm3” 80 mm4” 100 mm5” * 125 mm6” 150 mm8” 200 mm10” 250 mm12” 300 mm14” 350 mm16” 400 mm18” 450 mm20” 500 mm24” 600 mm28” 700 mm30” 750 mm32” 800 mm*Reduced Port
Basic Valve (Double-Chambered Actuator) 700Basic Valve (Single-Chambered Actuator) 705Solenoid-Controlled Valve 710Electronic Control Valve 718Pressure-Reducing Control Valve 720Pressure-Sustaining & Reducing Valve 723Differential Pressure-Reducing Control Valve 726Flow Control Valve, Constant Downstream Pressure 727Electronic Pressure-Reducing Valve 728Pressure-Sustaining Valve 730Pressure-Relief Valve, Quick Type 73QPressure-Sustaining Valve Remote Sensing Type 730RSurge-Anticipating Valve 735Differential Pressure-Sustaining Valve 736Electronic Pressure-Sustaining Valve 738Booster Pump Control Valve 740Booster Pump Control & Pressure-Reducing Valve 742Booster Pump Control & Pressure-Sustaining Valve 743Deep-Well Pump Hydraulic Control Valve 744Deep-Well Pump Electric Control Valve 745Booster Pump & Flow Control Valve 747Pump Circulation & Pressure Sustaining Control Valve 748Pump Circulation & Flow Control Valve 749 Level Control Valve 750Level Control & Pressure-Sustaining Valve 753Level & Flow Control Valve 757Level Sustaining Valve (Reservoir Outlet) 75AHydraulic Check Valve 760Flow Control Valve 770Flow Control & Pressure-Reducing Control Valve 772Flow Control & Pressure-Sustaining Control Valve 773Burst Control Valve (Excessive Flow) 790Check Valve (Lift-Type) 70NStrainer (Stone and Gravel Trap) 70FOther primary features available on request.
Primary Features CodeAdditional Features(Multiple Choices Permitted) Code
No Additional Feature 00Closing and Opening Speed-Control 03Differential Pressure 06Hydraulic Override 09Check-Lock 11High Sensitivity Pilot 12Electronic Control 18Check Feature 20Solenoid-Controlled & Check Feature 25Pressure Reducing Feature 2QTwo-Stage Opening 30Relief Override 3QElectrically Selected Multi-Level Setting 45Downstream Over Pressure Guard 48Closing Surge Prevention 49Electronic Multi-Level Setting - Type 4R 4RElectronic Multi-Level Setting - Type 4T 4THydraulic Control 50Hydraulic Accelerator Control 54Solenoid-Controlled 55Electric Override 59Modulating Horizontal Float 60Bi-Level Electric Float 65Bi-Level Vertical Float 66Modulating Vertical Float 67Bi-Directional Flow 70Altitude Pilot 80Modulating Altitude Control 82Sustaining Altitude Pilot 83Hydraulic Positioning 85Bi-Level Altitude Control 86Altitude Control with Bi-Directional Flow 87
2-14 meter Setting M65-22 meter Setting M515-35 meter Setting M425-70 meter Setting M8
Closing at Downstream Pressure Drop 91Proportion - Standard PDProportion - Optional PD2Other additional features available on request.
Sector Code
WWWAWSWCWH
WaterworksWW Aggressive WaterWW SeawaterWW Air ConditioningWW Hot Water
05.2004
28
CB F4ACEB16
Coating Code
Epoxy FB Blue RAL 5005 EBPolyester Green RAL 6017 PGPolyester Blue RAL 5010 PBUncoated UCTransparent Polyurethane top coating isavailable for epoxy coated valves.Other coatings available on request.
Voltage-Main Valve Position(When Solenoid De-energized) Code
24VAC/50Hz - Normally Closed 4AC24VAC/50Hz - Normally Open 4AO24VAC/50Hz - Last Position 4AP24VAC/60Hz - Normally Closed 46C24VAC/60Hz - Normally Open 46O24VAC/60Hz - Last Position 46P24VDC - Normally Closed 4DC24VDC - Normally Open 4DO24VDC - Last Position 4DP24VDC - Latch Solenoid 4DS220VAC/50-60Hz Last Position 2AP220VAC/50-60Hz Normally Closed 2AC220VAC/50-60Hz Normally Open 2AO220VDC - Normally Closed 2DC220VDC - Normally Open 2DO220VDC - Latch Solenoid 2DS110VAC/50-60Hz Normally Closed 5AC110VAC/50-60Hz Normally Open 5AO110VDC - Normally Closed 5DC110VDC - Normally Open 5DO110VDC - Latch Solenoid 5DSOther electrical ratings available on request.
24V
AC
DC
220V
110V
DC
AC
DC
AC
Ordering Guide
ISO - 16 16ISO - 25 25EN Drilled ISO-16 E6EN Drilled ISO-25 E5ANSI - 150 A5ANSI - 300 A3BST - D BDJIS - 16 J6JIS - 20 J2BSP BPBSP - 25 bar PHNPT NPNPT - 25 bar NH
Other end connections available on request.
End Connections Code
(up
to 3
”)
Flan
ged
Thre
aded
BERMAD Waterworks700 Series
Additional AttributesUnlimited Selection Code
V-Port Throttling Plug (U-Type) VLarge Control Filter FValve Position Indicator IElectric Limit-Switch SValve Position Transmitter QFlow Stem MLifting Spring LBalancing Piston GOrifice Assembly UPressure Separator dDouble-Chambered (Active) B3-way Control Loop XManual Selector ZFlow Over the Seat OSt. St. 316 Control Accessories NSt. St. 316 Actuator Internal Assembly DSt. St. 316 Internal Trim (Closure & Seat) TDelrin Bearing RHigh-Grade Bearing & Stem KSt. St. Bolts & Nuts mSpecial Elastomers for Seals & Diaphragm EPressure Gauge 6
Other additional attributes are optional.Please consult our sales department for further information.
05.2004
Tubing & Fittings Code
Copper Tubing & Brass Fittings CBSt. St. 316 Tubing & Fittings NNPlastic Reinforced Tubing& Brass Fittings
Plastic Reinforced Tubing & St. St. 316 Fittings
Plastic ReinforcedTubing & Fittings
Monel Tubing & Fittings MM
PB
PN
PP
Reduction Ratios TablePlug Type
Valve Size11/2”- 21/2”40- 65 mm
3”80 mm
4”100 mm
6”150 mm
8”200 mm
10”250 mm12-14”
300-350 mm16-20”
400-500 mm
3.72.52.62.22.52.02.52.02.42.02.32.02.22.02.22.0
V-PortFlat-Disc4.02.72.92.42.82.22.72.22.62.22.52.22.42.22.32.2
Standard ratio Optional ratio
29
Y6”WW 820 55 PB
Ordering Guide
Pattern Code
Oblique Y
Angle A
S
BERMAD Waterworks800 Series
No Additional Feature 00Closing and Opening Speed-Control 03Hydraulic Override 09Check-Lock 11Electronic Control 18Check Feature 20Solenoid-Controlled & Check Feature 25Pressure Reducing Feature 2QTwo-Stage Opening 30Relief Override 3QElectrically Selected Multi-Setting Levels 45Downstream Over Pressure Guard 48Closing Surge Prevention 49Electronic Multi-Level Setting - Type 4R 4RElectronic Multi-Level Setting - Type 4T 4THydraulic Control 50Hydraulic Accelerator Control 54Solenoid-Controlled 55Electric Override 59Modulating Horizontal Float 60Bi-Level Electric Float 65Bi-Level Vertical Float 66Modulating Vertical Float 67Bi-Directional Flow 70Altitude Pilot 80Modulating Altitude Control 82Sustaining Altitude Pilot 83Hydraulic Positioning 85Bi-Level Altitude Control 86
2-14 meter Setting M65-22 meter Setting M515-35 meter Setting M425-70 meter Setting M8
Closing at Downstream Pressure Drop 91Proportional PPSingle-Chambered PADouble-Chambered PBOther additional features available on request.
CodeAdditional Features(Multiple Choices Permitted)Size
11/2” 40 mm2” 50 mm21/2” 65 mm3” 80 mm4” 100 mm6” 150 mm8” 200 mm10” 250 mm12” 300 mm14” 350 mm16” 400 mm18” 450 mm20” 500 mm (u
p to
PN
25)
Primary Features Code
Basic Valve (Double-Chambered Actuator) 800Basic Valve (Single-Chambered Actuator) 805Solenoid-Controlled Valve 810Electronic Control Valve 818Pressure-Reducing Control Valve 820Pressure-Sustaining & Reducing Valve 823Flow Control Valve,Constant Downstream PressurePressure-Sustaining Valve 830Pressure-Relief Valve, Quick Type 83QSurge-Anticipating Valve 835Booster Pump Control Valve 840Booster Pump Control & Pressure-Reducing ValveBooster Pump Control & Pressure-Sustaining ValveDeep-Well Pump Electric Control Valve 845Booster Pump & Flow Control Valve 847Pump Circulation & Pressure SustainingControl ValvePump Circulation & Flow Control Valve 849Level Control Valve 850Hydraulic Check Valve 860Flow Control Valve 870Burst Control Valve (Excessive Flow) 890Strainer (Stone and Gravel Trap) 80FCheck Valve (Lift Type) 80NOther primary features available on request.
848
827
842
843
Sector Code
WWWAWSWCWH
WaterworksWW Aggressive WaterWW SeawaterWW Air ConditioningWW Hot Water
Construction Materials Code
Cast Steel SDuctile Iron CSt. Steel 316 NNickel Aluminum Bronze UOther constructional materials availableon request.
06.2004
30
NN FVI4ACEB40
Ordering Guide
BERMAD Waterworks800 Series
Tubing & Fittings Code
Copper Tubing & Brass Fittings CBSt. St. 316 Tubing & Fittings NNMonel Tubing & Fittings MMOther tubing & fittings available on request.
Coating Code
Epoxy FB Blue RAL 5005 EBPolyester Green RAL 6017 PGPolyester Blue RAL 5010 PBUncoated UCTransparent Polyurethane top coating isavailable for epoxy coated valves.Other coatings available on request.
Voltage-Main Valve Position(When Solenoid De-energized) Code
24VAC/50Hz - Normally Closed 4AC24VAC/50Hz - Normally Open 4AO24VAC/50Hz - Last Position 4AP24VAC/60Hz - Normally Closed 46C24VAC/60Hz - Normally Open 46O24VAC/60Hz - Last Position 46P24VDC - Normally Closed 4DC24VDC - Normally Open 4DO24VDC - Last Position 4DP24VDC - Latch Solenoid 4DS220VAC/50-60Hz Last Position 2AP220VAC/50-60Hz Normally Closed 2AC220VAC/50-60Hz Normally Open 2AO220VDC - Normally Closed 2DC220VDC - Normally Open 2DO220VDC - Latch Solenoid 2DS110VAC/50-60Hz Normally Closed 5AC110VAC/50-60Hz Normally Open 5AO110VDC - Normally Closed 5DC110VDC - Normally Open 5DO110VDC - Latch Solenoid 5DSOther electrical ratings available on request.
24V
AC
DC
220V
110V
DC
AC
DC
AC
06.2004
Additional AttributesUnlimited Selection Code
V-Port Throttling Plug (U-Type) VLarge Control Filter FValve Position Indicator IElectric Limit-Switch SValve Position Transmitter QFlow Stem MLifting Spring LBalancing Piston GOrifice Assembly UPressure Separator dDouble-Chambered (Active) B3-way Control Loop XManual Selector ZFlow Over the Seat OSt. St. 316 Control Accessories NSt. St. 316 Actuator Internal Assembly DSt. St. 316 Internal Trim (Closure & Seat) TDelrin Bearing RHigh-Grade Bearing & Stem KSt. St. Bolts & Nuts mSpecial Elastomers for Seals & Diaphragm EPressure Gauge 6
Other additional attributes are optional.Please consult our sales department for further information.
End Connections Code
ISO PN 16 16ISO PN 25 25ISO PN 40 40EN Drilled ISO-16 E6EN Drilled ISO-25 E5ANSI 150 A5ANSI 300 A3ANSI 400 A4JIS 16 J6JIS 20 J2JIS 30 J3Other end connections availableon request.
Flan
ged
Reduction Ratios Table
ReductionRatioValve Size
2.3
2.3
2.5
2.2
2.3
2.3
2.1
2.2
11/2”- 21/2”40- 65 mm
3”80 mm
4”100 mm
6”150 mm
8”200 mm
10”250 mm12-14”
300-350 mm*16-20”
*400-500 mm
* Available up to PN 25
i n f o @ b e r m a d . c o m • w w w . b e r m a d . c o mThe information herein is subject to change without notice. BERMAD shall not be held liable for any errors. All rights reserved.© Copyright by BERMAD. PC7WE00 04
BERMAD Water Control Solutions
BERMADPetroleum
BERMADFire Protection
BERMADGardening
BERMADAgriculture
BERMADWaterworks
stu
di[
o]z With representation on every continent and across some 86 countries,
BERMAD is an undisputed world leader in control valves, maintaining
broad training and parts distribution networks all over the globe.
Wherever your location, BERMAD is there.
BERMAD International Head Offices:
• BERMAD Australia
• BERMAD Brazil
• BERMAD Chile
• BERMAD China
• BERMAD Colombia
• BERMAD Italy
• BERMAD Mexico
• BERMAD Peru
• BERMAD UK
• BERMAD USA
i n f o @ b e r m a d . c o m • w w w . b e r m a d . c o m
BERMAD Worldwide
America • Europe • Asia • Australia • Africa
W a t e r C o n t r o l S o l u t i o n s
BERMAD Waterworks700 & 800 SeriesHydraulic Control Valves