bellows style - air lift company · (4) 18549 m-18 fw (4) 18551 wave washer .72” i.d. (4) 10324...
TRANSCRIPT
KitP/N
Compressed Length Extended Length Total Stroke Load Capacity @100 psi
Designed Ride Height
Eye Mount Stud Mount Eye Mount Stud Mount
82102 9.35” 9.01” 12.33” 11.99” 2.58” 900 lbs. 10.5” - 11.0”
82104 10.55” 10.21” 14.73” 14.39” 3.78” 900 lbs. 12.0” - 13.0”
82106 11.95” 11.61” 17.53” 17.19” 5.18” 900 lbs. 14.0” - 16.0”
82107 13.50” 13.16” 19.50” 19.16” 5.60” 900 lbs. 16.0” - 18.0”
w w w . a i r l i f t p e r f o r m a n c e . c o m • 8 0 0 . 2 4 8 . 0 8 9 2
KitP/N
Compressed Length Extended Length Total Stroke Load Capacity @100 psi
Designed Ride Height
Eye Mount Stud Mount Eye Mount Stud Mount
82601 8.85” 8.51” 11.83” 11.49” 2.58” 2000 lbs. 9.5” - 10.5”
82603 10.05” 9.71” 14.23” 13.89” 3.78” 2000 lbs. 11.5” - 12.5”
82605 11.45” 11.11” 17.03” 16.69” 5.18” 2000 lbs. 13.0” - 15.0”
82607 13.00” 12.66” 19.00” 18.66” 5.60” 2000 lbs. 15.0” - 17.0”
Port Size 3/8” - 18 NPT
Maximum Diameter 7.00”
Port Size 1/4” - 18 NPT
Maximum Diameter 5.10”
BELLOWS STYLE
SLEEVE STYLE
SlamAirTM shocks are designed as a direct replacement for a coil-over suspension. Air suspension will provide the best possible ride quality, but the true benefit is the aggressive show stance that only air can provide. With on-board control, road hazards are no longer a problem. Lift the vehicle up to clear a speed bump or get easy access to your trailer, then lay it back down for your preferred stance. A wide variety of upper and lower end options are available.
HOW TO ORDER1) Choose your air bag style:
sleeve or bellows2) Choose your length3) Choose your upper and
lower end options4) Enjoy the ride!
Includes(2) 67049 Eye Mount(4) 10324 Polyurethane
Bushing(2) 10672 Sleeve 1.5” Long
.706” O.D., .625” I.D.(2) 10673 Sleeve 1.5” Long
.706” O.D., .50” I.D.(4) 17312 SS Fastener 1/4”-
28 UNF x 5/8”(2) 18596 9/16”-18 Jam Nut
Zinc
Bushing MountP/N 34471
Upper Stud MountP/N 34472
Includes(2) 67085 Stud Mount 2.25”(4) 10607 Polyurethane
Bushing w/ Flat Washer(2) 10673 Bushing Sleeve(4) 17312 SS Fastener 1/4”-
28 UNF x 5/8”(2) 18475 Nyloc Nut 3/8”-24
Clear Zinc(2) 18596 9/16”-18 Jam Nut
Zinc
Spherical Bearing MountP/N 34474
Includes(2) 67049 Eye Mount(2) 10317 Spherical
Bearings(4) 10318 Clip(4) 17312 SS Fastener
1/4”-28 UNF x 5/8”(2) 18596 9/16”-18 Jam Nut
Zinc
Bushing MountP/N 34480
Includes(2) 67063 Eye Mount(4) 10324 Polyurethane
Bushing(2) 10672 Sleeve 1.5” Long
.706” O.D., .625” I.D.(2) 10673 Sleeve 1.5” Long
.706” O.D., .50” I.D.(4) 17312 SS Fastener 1/4”-
28 UNF x 5/8”(2) 18596 9/16”-18 Jam Nut
Zinc
Upper Stud MountP/N 34481
Includes(2) 67065 Stud Mount 2.25”(4) 10607 Polyurethane
Bushing w/ flat Washer(2) 10673 Bushing Sleeve(4) 17312 SS Fastener 1/4”-
28 UNF x 5/8”(2) 18475 Nyloc Nut 3/8”-24
Clear Zinc(2) 18596 9/16”-18 Jam Nut
Zinc
Spherical Bearing MountP/N 34528
Includes(2) 67063 Eye Mount(4) 10317 Spherical Bearing(4) 17312 SS Fastener 1/4”-
28 UNF x 5/8”(4) 10318 Clip(2) 18596 9/16”-18 Jam Nut
Zinc
Stud AdapterP/N 34475
Tee Bar Trunion MountP/N 34478
Bushing P/N 34476
Spherical BearingP/N 34477
Includes(2) 10317 Spherical Bearing(4) 10318 C-clip
Includes(4) 10324 Polyurethane Bushing(2) 10672 Bushing Sleeve (2) 10673 Bushing Sleeve
Includes(2) 10663 Tee Bar Trunion(4) 10812 C-Clip(4) 18549 M-18 FW (4) 18551 Wave Washer .72” I.D.(4) 10324 Polyurethane Bushings
Includes(2) 10649 Mounting Bkt(2) 17140 Carriage bolts
3/8” -16 x 2 G5(2) 17338 Hex Cap Screws 5/8”-
11 UNC x 3-1/2” Long(2) 18548 Nyloc Nut 5/8”-11 UNC (2) 18407 Flat Washers 3/8”(2) 18435 Nyloc Nuts 3/8”-16(4) 10324 Bushings(2) 10672 Sleeves 5/8”
Bellows End Options Sleeve End Options
Sleeve StyleBellows Style
Universal Lower End Options for Sleeve or Bellows
w w w . a i r l i f t p e r f o r m a n c e . c o m • 8 0 0 . 2 4 8 . 0 8 9 2AD-664 03/16
(3.66”)