www.moog.com/medical

Combining the familiarity of a syringewith the modularity of a flexible

disposable pump system.

Beeline®

Disposable Post-Operative Pain Control Pump

Moog is a registered trademark of Moog, Inc. All trademarks indicatedherein are the property of Moog, Inc. and/or its subsidiaries.

© 2009 Moog, Inc. All rights reserved. MD 40918-001 Rev. B

Beeline’s unique design is easy for the clinician to fill, followed by uncomplicated continuous infusion for higher patient satisfaction and improved outcomes. The Beeline is ideal for the flexible delivery requirements of chemotherapy, antibiotics, and pain management therapies.

FlexibleFeatures a wide range of flow sets (0.6 to 250 ml/hr) that were designed specifically for antibiotic, chemotherapy, and pain management applications.

Easy to read 5 mL graduation marks make for improved infusion monitoring.

tf 800.970.2337 ph 801.264.1001fx 801.264.1051 www.moog.com/medical

Moog Medical Devices Group4314 Zevex Park LaneSalt Lake City, UT 84123 USA

DisposableAvailable as a 100 mL or 275 mL syringe reservoir, the Beeline eliminates need for IV poles, roller clamps, or drop counting resulting in improved compliance and clinical efficacy in the hospital or at home.

Reduces Total CostNo programming knowledge is required, thus reducing training costs, simplifying therapy, and providing greater patient engagement and satisfaction.

Safe and AccurateDisposable reservoir does not need to be cleaned or calibrated, eliminating the possibility of patient-to-patient contamination. Reservoir is made of rigid polypropylene, reducing the concern of bursting, damage, or affecting patient infusion.

Product Specifications

Pumping Mechanism: Spring-driven syringe style action

Fill Volume:100 mL + 10 mL optional overfill275 mL + 10 mL optional overfill

Flow Rate Accuracy: +/- 15% of nominal flow rate

Dimensions:100 mL Infuser = 13 cm (5.1”) x 7 cm (2.8”)275 mL Infuser = 19 cm (7.5”) x 7 cm (2.8”)

Weight:100 mL Infuser = 180 g (unfilled)275 mL Infuser = 240 g (unfilled)

Positive Pressure: 6 psi nominal / 310 mmHg

Infusion Sets:Slow-flow: 0.6, 0.8, 1.5, 2.0, 4.0, 5.0, 8.0, 10.0 mL/hrFast-flow: 50, 100, 200, 250 mL/hr

Fluid Path Materials:

Slow-flow (< 20 mL/hr): polyethylene, polypropylene, silicone, butyl rubber, nitrile rubber, PVC, acrylic, PTFE, cellulose acetate, glass. Latex-free. Contains DEHP.

Fast-flow (≥ 20 mL/hr): polyethylene, polypropylene, silicone, butyl rubber, nitrile rubber, PVC, acrylic. Latex-free. DEHP-free.

Operating Temperature:Calibrated to deliver solution at the labeled nominal flow rate when the temperature of the infusate at the distal Luer is 86°F / 30°C (slow-flow infusion sets) and 72°F / 22°C (fast-flow infusion sets). Flow rate increases approximately 1% per 1°F / 0.56°C increase in temperature.

Fluid Viscosity:Calibrated using 5% Dextrose in Water (slow-flow infusion sets) and 0.9% Normal Saline (fast-flow infusion sets) as the infusate. Flow rate increases as fluid viscosity decreases.

Head Height:Calibrated with the infuser 45.7 (18”) cm below the infusion site at the patient. Flow rate decreases approximately 6% for every 25.4 (10”) cm that the infuser is lowered.

Visual Alerts:Graduation marks at 5 mL intervals to allow monitoring of infusion status. Clear polypropylene barrel allows for visualization of reservoir contents.

Product Description Case Size Order Code

Beeline Infuser, 110 ml 10 BL1N00

Beeline Infuser, 275 ml 10 BL2N00

Beeline Tubing Set, 0.6 ml/hr 10 BL1D0/6

Beeline Tubing Set, 0.8 ml/hr 10 BL1D0/8

Beeline Tubing Set, 1.5 ml/hr 10 BL1D1/5

Beeline Tubing Set, 2.0 ml/hr 10 BL1D002

Beeline Tubing Set, 4.0 ml/hr 10 BL1D004

Beeline Tubing Set, 5.0 ml/hr 10 BL1D005

Beeline Tubing Set, 8.0 ml/hr 10 BL1D008

Beeline Tubing Set, 10.0 ml/hr 10 BL1D010

Beeline Tubing Set, 50.0 ml/hr 10 BL1D050

Beeline Tubing Set, 100.0 ml/hr 10 BL1D100

Beeline Tubing Set, 200.0 ml/hr 10 BL1D200

Beeline Tubing Set, 250.0 ml/hr 10 BL1D250