Molded GripSpray Wand

TriggerSpray Gun

High PressureHose

By-passUnloader Valve

UDORHigh PressurePlunger Pump

InletFilter

InletSupply Line

By-passHose

DualInlet

Discharge

BallValve

High PressureSpray Nozzle

SupplyTank

Molded GripSpray Wand

TriggerSpray Gun

High PressureHose

By-passUnloader Valve

UDORHigh PressurePlunger Pump

InletFilter

InletSupply Line

By-passHose

Inlet

Discharge

BallValve

High PressureSpray Nozzle

SupplyTank

BASIC TANK FEED HIGH PRESSURE CLEANING SYSTEM PLUMBING DIAGRAMUp to 7 GPM

BASIC TANK FEED HIGH PRESSURE CLEANING SYSTEM PLUMBING DIAGRAMOver 7 GPM. DUAL INLET REQUIRED

NOTE: For Tank Feed Systemsover 7 GPM, feed pumps throughBOTH inlets to ensure proper flowand prevent cavitation and dam-age to pump.

WARNING: Consult UDOR U.S.A. for plumbing requirements on high speed, 3400 RPM Pumps.

Required GPM Min. Feed Line Size Inlet Filter (40 Mesh Max.)2 - 4 GPM 3/4" 3/4" 20-40 Mesh Screen5 - 7 GPM 1" 1" 20-40 Mesh Screen8 - 15 GPM 1-1/2" 1-1/2" 20-40 Mesh Screen

PLUMBING REQUIREMENTS

NOTE: All plumbing accessoriesshould be the same or greaterdiameter as the feed line. All ballvalves should be full port valves.

Optional ThermalRelief Valve

Optional ThermalRelief Valve

129

UDOR U.S.A. Plunger Pump Parts Breakdowns & Reference Guide

NOTE: On any tank feed systemeach pump must be fed by itsown separate feed line only.Never feed multiple pumps withone common feed line.

NOTE: On any tank feed systemeach pump must be fed by itsown separate feed line only.Never feed multiple pumps withone common feed line.

1" Hose

1-1/2" Hose

3/4" Minimum

3/4" Minimum