basic electrostatic spray finishing

8/9/2019 Basic Electrostatic Spray Finishing

1/34

Basic ElectrostaticSpray Finishing

Concept and Theory Training


2/34


3/34

Introduction

Welcome to Basic Electrostatic Spray Finishing , a learning module in Graco’s basic concept and

theory sales training curriculum. Your understanding of the information in this module providesthe basis for further study of specific Graco products. Your ability to successfully promote and sellGraco’s products depends in part on how well you learn the basics and then apply this knowledgeto addressing your customers’ needs for Graco equipment.

While this curriculum best fits the requirements of Graco and distributor sales people, it will also benefit anyone whose job function depends on knowledge of Graco’s products.

Module Overview

This module introduces basic information on electrostatic spray finishing processes, including theunderlying terms, concepts, and principles. You will understand how electrostatic charging can be

used with a variety of spray finishing systems to improve spray transfer efficiency.

How to Use This Module

The curriculum consists of a series of self-study modules. As the term self-study implies, you workthrough the materials on your own at a comfortable pace. Plan sufficient time (approximately 30minutes) to complete at least one section of a module in a working session.

This module combines a variety of features that make the learning process convenient andproductive:

• Learning objectives

• Text

• Charts and illustrations

• Progress checks

• Additional resources

Learning Objectives

Each section of materials offers a set of learning objectives. Read the objectives and use them toguide you to the most important concepts. After you finish each section and before you completethe progress check, reread the learning objectives to confirm that you understand the key concepts.

Text

Definitions, examples, and explanations comprise the learning module text. Read it carefully andreturn for review if necessary.

Basic Electrostatic Spray Finishing 1


4/34

Charts and Illustrations

An important element of any instruction is visualizing the concepts. This module contains graphicsand illustrations to enhance the text material. Whenever appropriate, the module also containscharts that help you organize or summarize information.

Progress Checks

Progress checks are self-tests that provide reinforcement and confirm your understanding ofimportant topics. After completing each major section of the module, return to review theobjectives, and then work through each of the progress check items. Upon completion, check youranswers against those provided. If you answered any incorrectly, return to the text and reread thepertinent information.

Additional Resources

This module may refer you to other documents or sources that expand on the concepts covered inthe module. The reference will include the name of the source and how you can obtain it.

Basic Electrostatic Spray Finishing2


5/34

Introduction to ElectrostaticSpray Finishing

Learning Objectives

This section provides a foundation for learning about electrostatic spray finishing. The term electro-statics or electrostatic spray finishing refers to a spray finishing process in which electrical charges andelectric fields are used to attract particles of atomized coating material to the target (the object to becoated). In the most common types of electrostatic systems, electrical charges are applied to thecoating material and the target is grounded, creating an electric field. The charged particles ofcoating material are drawn by the electric field to the surface of the grounded target because of theattraction of opposing electrical charges. Other, less common types of electrostatic systems apply anelectrical charge to the target and ground the coating material, or apply opposite electrical chargesto the coating material and the target. After completing this introduction to electrostatic sprayfinishing, you will be able to:

• Define the termelectrostatics

as it applies to spray finishing.• Discuss how electrostatic spray charging is used to improve the transfer efficiency of

spray finishing.

• Name several types of spray finishing systems with which electrostatics are used.

• Recognize key terms used to discuss electrostatic spray charging.

Why Use Electrostatic Spray Finishing?

Electrostatic spray charging improves the transfer efficiency of spray finishing equipment. Thetransfer efficiency improvements occur because the electrostatic forces help overcome other forces,

such as momentum and air flow, that can cause the atomized materials to miss the intended target.Electrostatic methods save coating material, time, and labor. More of the material is attracted to andadheres to the target, and less material is lost in the spray booth and the surrounding environment.Electrostatic methods also lower solvent emissions into the air since less coating material is neededto coat each part.

Types of Electrostatic Systems

Electrostatic spray finishing systems can be either automatic or manual.

Automatic Electrostatic Systems

The automatic electrostatic systems include:

• High speed rotational (stationary or reciprocating) atomizers

• Reciprocating discs

• Automatic air spray, airless, air assisted airless, or HVLP spray guns



6/34


7/34

Key Terms

Figure 2 below provides definitions for many of the terms used to explain electrostatic spraycharging. Review the definitions now. You can refer back to these definitions, as needed, whileyou proceed through this module or other training on Graco electrostatic products.

Key Terms For Understanding Electrostatics

Current The flow of electrons.Measured in amps, milliamps, or microamps.

Voltage The force or pressure pushing electrons.Measured in volts or kilovolts.

Circuit A completed (circular) electrical path that permitsthe flow of electrons.

Ground Within a circuit, a connection to earth potentialor true earth ground.

Conductor Material through which electrons can easily flow.

Resistor Material through which electrons cannot easily flow,and used to control the flow of electrons inelectrical circuits.Measured in ohms or megohms.

Insulator Non-conductive, highly resistive material thatstops the flow of electrons.

Ionization The process by which molecules gain orlose electrons.

Generator A machine that changes mechanical energy intoelectrical energy.

Alternator A generator that changes mechanical energy toalternating current.

Power Supply A device that converts one type of electricalpower to a different type of electrical power—forexample, from low voltage AC to high voltage DC.

Capacitance The storage or accumulation of electrical charges

on a conductive surface that is insulated fromother conductive surfaces so that it will hold itselectrical charge.

Capacitor A device within an electrical circuit used to holdelectrical charges.

Transfer The percent of coating materials that reaches the targetEfficiency when spraying.

Figure 2 Key terms for electrostatics



8/34

Understanding Particle Charges

Learning Objectives

To understand electrostatic spray charging, you must first be able to identify the types of chargedparticles that make up matter and explain how charged particles impact one another. After com-pleting this section on electrical charges, you will be able to:

• Name the types of particle charges that make up matter.

• Explain how electrically charged particles act on other particles with the same ordifferent charges.

• Describe the forces of electric fields.

Dynamics Among Charged Particles

All matter has an electrical charge. Matter is made up of three types of electrically charged particles:

1. Negatively charged particles have excess electrons.

2. Positively charged particles have excess protons.

3. Neutral particles have a balanced number of electrons and protons.

Particles and objects with like charges repel each other, whereas particles with unlike charges attracteach other. A single, isolated particle that is either negatively or positively charged will attract neu-tral particles. Charged particles are also attracted to the closest grounded surface.

The three types of electrically charged particles are illustrated in Figure 3.

Figure 3 Electrically charged particles


Negatively charged particle

Positively charged particle Neutral particle

05048


9/34

Electric Fields

Electric (or electrostatic) fields are the lines of force that originate on a charged object and terminateon an oppositely charged object, or ground. Thus, there is an electric field between a chargedparticle (or object) and a grounded object. There is a field between the ionizing needle and thegrounded object. There is also an electric field between oppositely charged particles. The fieldstrength is measured in volts per meter.

A charged particle that enters an electrostatic field will be subjected to the force that exists in thefield, just as an object with mass is subjected to a force in a gravitational field. It is this force thatis used in electrostatic spray charging, as you will learn in the sections to follow.

In electrostatic spray finishing, an electric field is created by the ionizing needle. As the paintparticles are charged, fields form between the particles and the grounded object. The benefits of

electrostatic spray finishing are due to the electric fields between the needle and the groundedobject, and the fields between the charged paint particles and the grounded object.



10/34

Progress Check

Directions: After answering the following questions, compare your answers with those provided

in the answer key following this progress check. If you responded to any items incorrectly, returnto the text and review the appropriate topics.

1. Which of the following accurately describe an electrostatic spray finishing system?(Select all that apply.)

a. Electrical charges are applied to the coating material, and the target is grounded.

b. Electrical charges are applied to the target, and the coating material is grounded.

c. Opposite electrical charges are applied to the coating material and the target.

d. The momentum of air flow is used to attract the coating material to the target.

2. The advantage of using electrostatics with spray finishing processes is:

a. More coating material enters the surrounding environment.

b. More solvent emissions are released in the air.

c. A greater percentage of sprayed coating material reaches the target.

d. More air flow impacts the spray.

3. With which of the following spray systems can electrostatics be used?

a. Manual systems.

b. Automatic systems only.c. Airless and air-assisted systems only.

d. Both manual and automatic systems.

For items 4 through 7, match the terms with their definitions.

Terms

a. Ionization

b. Generator

c. Resistor

d. Ground

Descriptions

____ 4. A connection is made to earth (ground).

____ 5. Molecules gain or lose electrons.

____ 6. Controls the flow of electrons in circuits.

____ 7. Changes mechanical energy to electrical energy.



11/34


12/34

Answers to Progress Check

1. a, b, and c. In most electrostatic spray charging systems, electrical charges are applied to thecoating material and the target is grounded. Other, less common types of electrostatic systemsapply an electrical charge to the target and ground the coating material, or apply electricalcharges to both the coating material and the target.

2. c. The advantage of using electrostatics with other spray finishing processes is that a greaterpercentage of sprayed coating material reaches the target.

3. d. Electrostatics can be used with both manual and automatic spray finishing systems.

4. d. A ground is a connection to an earth potential or a true earth ground.

5. a. Ionization is when molecules gain or lose electrons.

6. c. A resistor is used to control the flow of electrons in circuits.

7. b. A generator changes mechanical energy to electrical energy.

8. a, e, and f. Negative particles and positive particles attract each other. Neutral particles areattracted to both positive particles and negative particles.

9. c. An electric field can exist between a charged object and an oppositely charged object

or ground.



13/34

Electrostatic Spray Finishing Equipment

Learning Objectives

This section explains how electrostatic spray charging equipment uses the charges and the force of an electric field to improve the efficiency of spray finishing. After completing this section on electro-static spray charging equipment, you will be able to:

• Identify the basic parts of an electrostatic spray finishing system.

• Explain how electrostatics impact the transfer efficiency of spray finishing processes.

• Identify the electrostatic charging methods.

• Describe the wraparound effect of electrostatic spray charging.

• Describe the key characteristics of electrostatic spray charging equipment.

• Explain the optimal conditions and applications for electrostatic spray charging.

The Electrostatic Spray Charging Process

The illustration in Figure 4 shows the basic components of electrostatic spray equipment. Amongthese basic components are:

• A spray gun or atomizer

• Particles of atomized coating material, which are emerging from the gun in a spray pattern

• An ionizing needle located in or near the stream of coating material

• The target, or object, to be coated

The equipment components illustrated in Figure 4 work together as an electrostatic spray finishingsystem. In the example in Figure 4, the ionizing needle applies an electrical charge to the particles of material. (In an electrostatic system, the coating material may be charged either before or after it isatomized.)

Figure 4 Basic components of electrostatic spray equipment


Earth Earth

Earth

Target object

Ionizing

needle

Atomizer

(sprayer)

Charged

coating

particles

Paint

High voltage

power supply

05050


14/34

As illustrated in Figure 5, the electrical field between the ionizing needle and the grounded object

helps drive the charged spray particles to the grounded target. The force of the electrostatic fieldcauses a greater percentage of the charged spray particles to reach the grounded object, rather thanmiss the target or be swept away by surrounding air flow. In other words, the transfer efficiency of the spray finishing process is improved through electrostatics because the electrical field draws anincreased number of particles to the target.

Figure 5 The electric field of an electrostatic system

Electrostatic Charging Methods

There are four types of electrostatic charging methods. The four electrostatic charging methods are:

• Corona charging

• Contact charging, (also called conduction charging)

• Induction charging, (also called non-contact charging)

• Frictional charging, (also called tribo charging)

Of these methods, corona and contact (conduction) charging are the two primary methods used inliquid electrostatic spray finishing.

The four charging methods are explained and illustrated on the pages to follow.


Electric

Field

Electrostatic

Sprayer

Grounded

Target

05049


15/34

Corona Charging

The corona charging method utilizes a pointed or sharply curved electrode that is raised to a highelectrical potential. The intense electric field at the electrode breaks down the surrounding air andcreates ions, which are then free to attach themselves to the atomized coating material.

Figure 6 Corona charging

Contact Charging

The contact charging (or conduction) method utilizes a direct charge transfer, rather than ionization.In this method, an electric charge flows from a source of high potential (voltage) to the coatingmaterial that has come into contact with the source.

Figure 7 Contact or conduction charging

A limitation of contact charging is that it is not easily used to apply an electrostatic charge to

insulating coating materials. It is limited to relatively conductive coatings.


Liquid droplet

charged by

conduction

Earth Earth

EarthIonizing

needle

Paint

High voltagepower supply

05050

05051


16/34

Induction Charging

The induction charging method uses an electric field to induce charge onto an earthed (grounded)object that is near a charged surface. If the ground is removed from the object, the induced chargecannot be dissipated, and the object retains its charge. Induction charging is also limited torelatively conductive coatings.

Figure 8 Induction charging

Frictional Charging

Frictional charging is familiar to many people, yet often misunderstood. In frictional charging,contact or friction between two unlike materials generates a charge. The amount of charge thatis generated depends on the nature of the contact, the electrical properties of the materials, andthe conditions of humidity and temperature.

Efficiency of Electrostatic Spray Charging

Electrostatics can be used with any atomization spray application process to improve its transferefficiency. However, the addition of electrostatics does not make the spray application process100 percent efficient. For example, a spray gun without electrostatics may have an efficiency of25 percent transfer of paint to the object. By adding electrostatics, transfer efficiency may beincreased significantly.


Liquid dropletscharged by

induction

05052


17/34

The Wraparound Effect

Wraparound is the effect of electrostatic spray charging in which the spray is directed at only oneside of the object, yet more than one side of the object is coated. This wraparound effect occurswhen spray particles that have moved past the targeted surface are drawn back to the object

by the electrostatic forces.

Figure 9 The wraparound effect

While the wraparound effect may contribute to the increased efficiency of electrostatic methods,wraparound is not the primary source of increased transfer efficiency. Rather, the main benefitof electrostatics is the improved transfer efficiency of paint to the primary surface.


Grounded

object

Secondary

surface

Primary surface, heaviest

concentration of paint

Charged

fluid

05053


18/34

The Faraday Cage Effect

The wraparound effect may be a disadvantage in some spray finishing applications. For example,objects with deep cavities are not ideal for electrostatic spray finishing processes. This is because thepaint is drawn to the outermost points of the object, which can lead to uneven coating. This type of uneven coating is the result of the Faraday cage effect, as illustrated in Figure 10.

Figure 10 The Faraday cage effect

Optimal Electrostatic Applications

Electrostatic spray charging works best when the spray particles are small and light because theelectrostatic forces can more easily overcome the momentum forces on the particles. Electrostaticspray charging has the greatest positive impact in directing and controlling particles that aremoving at a low velocity. Extraneous forces, such as excess air movement, should be eliminatedas much as possible to aid the electrostatic process, while still meeting OSHArequirements. Inaddition, the object to be coated must be conductive or have a conductive backing or coating.The target must also be well grounded.

The Faraday cage effect comes into play when an electrostatic process is used to finish parts orobjects with deep cavities. These types of objects are not ideal for electrostatic applications becausethe paint is drawn to the outermost points of the object’s surface, leading to uneven coating. How-ever, good operator technique can overcome most Faraday cage effect situations. For example, withGraco electrostatic spray gun technology, the operator can easily turn the voltage down or off toovercome the problem.

Key Equipment Characteristics

Terms that are often used to describe the qualities of electrostatic systems or equipment are stiff (or uninhibited) and resistive. In electrostatic applications, the terms stiff and resistive are usedas antonyms (or opposites).


Target area

Charged

fluid

Grounded

object

05054


19/34

Stiff Systems

Stiff systems are also called uninhibited systems. These terms describe automatic electrostatic finishingequipment that places little or no resistance in the path of the electrical power that is charging thespray application tool. Stiff systems provide relatively constant voltage output, regardless ofcurrent draw.

Stiff systems are capable of current levels and discharges that can ignite flammable vapors, andmay provide a significant electric shock hazard to humans. Therefore, stored energy must be bledoff the equipment to ground before the operator approaches the equipment.

Resistive Systems

You may recall from an earlier section (defining electrostatic terms) that the term resistive refers to

material through which electrons cannot easily flow. Resistive systems are safer than stiff systems, but the energy release from arcing the charge system to ground still may ignite flammable vapors.Resistive systems may be manual or automatic.

In resistive systems, the voltage drops off significantly when excess current is drawn. The maxi-mum current output (short circuit) of a resistive system would typically not exceed 200 microamps,whereas a stiff system might deliver 5000 microamps or more of current.

The chart in Figure 11 shows the voltage and current of resistive and stiff systems.

Figure 11 Resistive and stiff electrostatic systems

Nonincendive Systems

The term nonincendive is also used to describe some resistive manual and automatic equipment.Discharges from a device or system that is nonincendive is incapable of igniting the flammablevapors from typical paint solvents.

Nonincendive systems minimize the energy release from the high voltage system by minimizingthe capacitance of the charging system and utilizing proper spray gun design. In many cases, localfire codes or regulations require that electrostatic sprayers meet nonincendive requirements, or

standards.


05055

Stiffsystem

Current 200 microamps

Resistive system

8 0 K . V .

V o l t a g e


20/34

To summarize the key characteristics of electrostatic spray equipment, you need to remember that:

• Stiff systems have current levels and discharges that can ignite flammable vapors• Resistive systems are safer than stiff systems, but still may ignite flammable vapors

• Only nonincendive systems are incapable of igniting typical paint solvent vapors

High Voltage Power Supplies

In electrostatic spray charging, some systems may use cables to bring the power or charge to thespray gun. Graco electrostatic spray guns do not use cables because they have an internal powersupply. In electrostatic systems, the cable types, and alternatives to cables, are:

• High voltage cable

• Low voltage cable

• Graco systems with internally generated power (and no cables)

In systems that use a high voltage cable, the power supply is remote from the sprayer and uses a highvoltage cable to transmit voltage to the spray gun.

With a low voltage cable, the power supply is also remote from the sprayer, but the cable is low volt-age and smaller in diameter. In these systems, voltage is increased inside the spray gun through atransformer and a cascade multiplier.

Graco electrostatic spray guns have internally generated power, and therefore do not require cables,as shown in Figure 12. In Graco systems, voltage is generated and multiplied through an internal

power supply within the spray gun barrel. Graco systems use air power to spin an alternator togenerate voltage. Therefore, the device does not need cables or an external power supply.

Figure 12 Internally generated power in Graco electrostatic spray guns


05056

Power supply

Electrodeneedle

Ground wire

Paint inlet

Conductivegroundedair hose

Air inlet

Air supply


21/34

Voltage isolation units, as pictured in Figure 13, prevent the spraying voltage from being depleted toground through the paint supply. This method is used only with highly conductive, non-flammablewater borne coating materials.

Figure 13 Voltage isolation unit

Electrostatic Accessories

The accessories that are commonly used with electrostatic spray charging equipment are:

• A high voltage probe and meter to measure voltage output from the spray gun

• A paint resistivity meter to measure the resistivity or conductivity of the coating material

• A megohm meter to check electrical grounding, as well as electrical continuity within

the system• A microamp meter to measure the current flow in the system


Air supply

Ground wire

Electricallyconductiveair hose

Voltage control

Fluid supply

Gracoelectrostatic gun

05057


22/34

Progress Check


in the answer key following the progress check. If you responded to any items incorrectly, returnto the text and review the appropriate topics.

1. Which of the following statements accurately describes how a Graco electrostatic spraycharging system improves transfer efficiency? (Select only one answer.)

a. Neutral particles are driven by an electric field to the positively charged target.

b. Neutral particles are driven by an electric field to the negatively charged target.

c. Charged particles are driven by an electric field to the grounded target.

d. Grounded particles are driven by an electric field to the charged target.

2. Which of the following are electrostatic charging methods? (Select all that apply.)

a. Corona

b. Contact

c. Conduction

d. Induction

e. Non-contact

f. Frictional.

3. Which of the following statements about the wraparound effect are true? (Select all that apply.)a. Wraparound coats all sides of an object evenly.

b. Wraparound is effective for grooved surfaces.

c. Wraparound accounts for the primary efficiency gain of electrostatics.

d. Wraparound means particles that have passed the front surface of the target are drawn backto other surfaces.



23/34

4. Which of the following electrostatic spray charging systems may potentially ignite typical paint

solvent vapors when discharging to ground? (Select all that apply.)a. Stiff systems

b. Resistive systems

c. Nonincendive systems.

5. Which of the following methods of delivering power to the applicator are used in Graco elec-trostatic spray guns? (Select all that apply.)

a. High voltage cable

b. Low voltage cable

c. Internally generated power.

6. Which conditions are most optimal for electrostatic spray charging?

a. Small, light particles moving at a high velocity

b. Small, light particles moving at a low velocity

c. Large, heavy particles moving at a high velocity

d. Large, heavy particles moving at a low velocity.



24/34


1. c. In a Graco electrostatic spray charging system, charged particles are driven by an electricfield to the grounded target to improve transfer efficiency.

2. a, b, c, d, e, and f. The names of the four types of electrostatic charging methods are corona,contact or conduction, induction or non-contact, and frictional.

3. d. Wraparound means particles that have passed the target are drawn back. The otherstatements are false.

4. a and b. Stiff systems have current levels and discharges that can ignite flammable vapors.Resistive systems are safer than stiff systems, but still may ignite flammable vapors. Only

nonincendive system discharges are incapable of ignition.

5. c. Graco electrostatic spray guns use internally generated power, and therefore they haveno cables.

6. b. In electrostatic spray charging, the optimal conditions have small, light particles movingat a low velocity.



25/34


26/34


27/34

Electrostatic Equipment Safety

Learning Objectives

Safety measures are even more critical in electrostatic spray charging because of the added electricalcharges. The primary hazards with electrostatic spray equipment are electrostatic shock, flash fires,unintended pressure release, and skin injection (with high-pressure systems only). Therefore, thissection covers safety measures you must take when using electrostatic spray charging equipment.After completing this section on safe use of electrostatic equipment, you should be able to:

• Explain the basic safety measures necessary for safe operation of electrostatic sprayfinishing equipment.

• Describe safe methods for spraying flammable and non-flammable coating materialswith electrostatic spray finishing equipment.

• Respond appropriately to safety approval information.

Preventing Electrical Hazards

In electrostatic spray charging, coating materials are often flammable. The spray finishing deviceutilizes high voltage, creating the potential for an arc. Therefore, flash fires can occur when equip-ment is used improperly or when the operator does not follow proper grounding procedures.

Grounding is a key component of electrostatic safety. This means that operators of electrostaticspray finishing equipment must:

• Ground all conductive objects in the spray area, including all persons. (Agood operatorpractice is to have the palm of a hand in contact with the gun handle.)

• Stay clear of electrostatic charged equipment.

• Ensure that any electrostatic charge has been dissipated before approaching the device forany reason, such as for cleaning and maintenance.

• Never immerse electrostatic spray equipment in solvent for cleaning, because solvents cancause electric shorts or damage electrostatic spray equipment.

• Use only coating materials for which the electrostatic spray equipment has been approved.

• Never isolate flammable materials.

• Check grounding frequently.

• Perform flushing and cleaning operations with the voltage off.

• Stop spraying immediately if there are any shocks or arcing.



28/34

The illustration in Figure 15 points out the key safety features of electrostatic spray charging

equipment.

Figure 15 The safety features of electrostatic spray charging equipment

Graco electrostatic spray guns are grounded through special air hoses which are conductive andhave left-hand threads to match the spray gun’s air inlet threads.

Preventing Non-Electrical Hazards

For non-electrical hazards, electrostatic safety procedures are similar to those used with other typesof spray finishing equipment. Users of electrostatic spray finishing equipment must:

• Avoid approaching the front of the spray gun when it is pressurized.

• Never point the gun at yourself or another person.

• Be aware that the electrode (needle) is sharp and can cause injury.

• Always follow pressure relief procedures before servicing the equipment.

• Follow coating and solvent manufacturers’ recommendations for safe handling of materials.

• Make sure that all operators are properly trained.


Power supply

Nonconductive,insulating barrel

Resistors

Needleelectrode

Tip guardand warning

Paint inlet

Air inlet

Conductive handle

Left handthread

Groundwire

Airsupply

Conductivegroundedair hose

Fluid tube(serves astrigger guard)

Trigger safety

Voltage (ES)on/off switch

05056


29/34

Handling Flammable Coating Materials

Operators must follow several rules to safely handle flammable coating materials with electrostaticsystems. First of all, do not electrically isolate flammable coating materials. This applies to any fluidwith a flash point of less than 140ºF (60ºC), or containing more than 20 percent organic solvents.Always use approved nonincendive spray equipment for flammable coating materials wheneverpossible.

Handling Non-Flammable Coating Materials

With electrostatic systems using nonflammable coating materials, including many water bornecoatings, the fire hazard is essentially eliminated.

However, water borne materials are highly conductive, and they are often isolated so that a chargecan be applied to them. When the coating material and supply system are raised to a high voltage,they store up sufficient energy to provide an uncomfortable electrostatic shock if approached by anoperator. For this reason, the supply system is designed to prevent access to any charged surfacesor objects. However, the front of the gun remains accessible and will release an electric discharge,or arc, if it is approached when it is charged.

With isolated systems, you must make sure the voltage is discharged before approaching the frontof the gun. Operators must also make sure the voltage is discharged before servicing the coatingmaterial supply system.

Understanding Safety Approvals For electrostatic spray charging systems, there are approval agencies around the world that exam-ine, test, and approve nonincendive electrostatic spray equipment for use in hazardous locations.These agencies examine and test the equipment against safety standards, including tests that verifythat the equipment will not ignite the coating materials that are approved for use with that equip-ment. Approvals are based on the ignitability of the coating materials that can be used with theequipment. In other words, equipment approval specifies the class and division of coating materi-als that can be used with the equipment. Graco nonincendive equipment can be used to spraycoating materials that are classified as Class 1, Group D or safer.



30/34

Progress Check


in the answer key following the progress check. If you responded to any items incorrectly, returnto the text and review the appropriate topics.

1. Which of the following types of coating materials can be described as dead? (Select allthat apply.)

a. Highly resistive coating materials

b. Highly conductive coating materials

c. Non-flammable coating materials

d. Coating materials that will not wrap.

2. Which coating materials should be electrically isolated for safe electrostatic spraying?

a. Non-flammable coating materials

b. Flammable coating materials

c. Both non-flammable and flammable coating materials.

3. Which of the following are potential hazards of electrostatic equipment? (Select all that apply.)

a. Electrostatic shock

b. Flash fires

c. Skin injectiond. Needle puncture.

4. What does equipment approval information tell you? (Select only one answer.)

a. The equipment can be safely used by untrained operators.

b. The equipment can be immersed for cleaning.

c. Properly used equipment is not capable of igniting any materials.

d. Properly used equipment will not ignite specified coating material vapors.



31/34


1. a. Highly resistive coating materials are described as dead. The others are not.

2. a. Only non-flammable coating materials can be electrically isolated.

3. a, b, c, and d. The hazards of electrostatic equipment include electric shock, flash fires, skininjection, and needle puncture injury. Note that these hazards apply to all spray processes,not just electrostatic.

4. d. Equipment approval information tells you that the equipment will not ignite approvedcoating materials.



32/34

Basic Electrostatic Spray Finishing

Module Evaluation

The purpose of this Module Evaluation is to help the Graco Technical Communications department determine

the usefulness and effectiveness of the module.

Instructions: Please complete the evaluation, tear it on the perforation, and return it Graco Technical Communications Department, P.O. Box 1441, Minneapolis, MN 55440-1441, USA.

1. Based on the objectives, this module:

Significantly exceeded my expectations

Exceeded my expectations

Met my expectations

Was below my expectations Was significantly below my expectations

2. Why did you select the above rating?

3. How do you plan to use the module information in your job?

4. How do you think the module could be improved?

I verify that I have successfully completed Module No. 321-028Title: Basic Electrostatics

Signature _________________________________________________

Date _______________________


33/34

Graco

Technical Communications Dept.

P.O. Box 1441

Minneapolis, MN 55440-1441 U.S.A.

(fold here)

(fold here)


34/34

This module was developed by the Graco Technical Communications Department with assistance from

the following individuals:

Tony Brajdich

Michelle Hagman

Bob Lind

Glen Muir

Al Orr

David West

Todd Daniels - Midway Industrial Supply

The Graco Concept and Theory Training program consists of the following topics:

Fluid Basics

Atomization

Electrostatic Spray Finishing

Safety

Airspray Technology

Fluid Types: Paints and Other Coatings

Fluid Types: Lubricants

Fluid Types: Sealants and Adhesives

Airless Atomization

Spraying Techniques

Transfer Efficiency

Fluid MovementFluid Controls

Pumps

Motors and Power Sources

Plural Component Paint Handling

Plural Component Sealant and Adhesive Handling

Paint Circulating Systems

Automatic Finishing

Lube Reels and Dispense Valves

Lube Metering Systems

Electronic Fluid Management Systems

basic electrostatic spray finishing

Documents