axle holders din 15058
DESCRIPTION
Axle Holders DIN 15058TRANSCRIPT
-
General tolerancesDIN ISO 2768-medium
Subject to technical alterations
We accept no responsibility for incorrect or incomplete details or
information given
mbo products are available from MARYLAND METRICS
Axle holders DIN 15058
mbo standard 35
20_0712/2012
- 123 -
For axle diameterd2
Order number a b1) c1 c2 d12) f g h
Fastening screwsthread according to DIN
13
Weightkg/pcs.
RangePreferred diameter
Sheet 1Regular thread
Sheet 5 and 6Fine-pitch
thread
above 16
up to 25
18
10 35 0000 0020/... 20 5 60 36 916
3
10 M 8 M 8x1 0.04220
422 1725 18 4.5
above 25
up to 40
28
10 35 0000 0025/... 25 6 80 50 11
224.5
12 M 10 M 10x1 0.085
(30)5.5
32 23(35)
246
366.5
40 26
above 40
up to 63
45
10 35 0000 0030/... 30 8 100 70 13
31 6.5
16 M 12 M 12x1.5 0.19
50 33 7(55)
357.5
56 8(60) 36 963 37 9.5
above 63
up to 100
70
10 35 0000 0040/... 40 10 140 100 17
45 10
20 M 16 M 16x1.5 0.4(75) 47 10.580 48 1290 52 13
100 56 14above
100up to 160
110
10 35 0000 0050/... 50 12 190 140 21
65 15
25 M 20 M 20x1.5 0.9125 71 16.5140 77 18160 85 20
above 160
up to 250
180
10 35 0000 0060/... 60 16 250 200 25
98 22
32 M 24 M 24x1.5 1.75200 105 25220 112 28250 125 30
avoid sizes quoted in brackets wherever possible1) the width of the groove in the axle depends on the operating conditions and the semi-finished product used for the axle holder
2) state other hole diameters when ordering
Material: St 37 - 1alternative: stainless steel (supplement to order number .../000)
Special versions upon request
Surface protection:
Identifier Supplement to order number
bright .../001electr. galvanised white (layer min. 5 m) .../013
Example for ordering: Axle holders according to DIN 15058, a = 30 mm, b = 8 mm, bright;Order number: 10 35 0000 0030/001
Return to main fastener catalog indexhttp://mdmetric.com/fastindx/indexmstr.htm
Return to chapter index http://mdmetric.com/fastindx/chapterj2.htm
Return to Maryland Metrics home pagehttp://mdmetric.com/index.html
MARYLAND METRICS Fastener Catalog - Chapter J2 P.O. Box 261 Owings Mills, MD 21117 USA phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 email: [email protected] web: http://mdmetric.com RFQ form: http://mdmetric.com/rfq.htm copyright 2013 maryland metrics/mbo osswald - ver jj15f
How to order: Please prefix the mbo part number or description with R239- example: R239-10 01 0004 9001/014