awards and accolades - nitrkl.ac.inenglish).pdfawards and accolades • think odisha leadership...

AWARDS AND ACCOLADES• Think Odisha Leadership Award, The Times of India in 2009.

• “Outstanding Engineering Institute of Eastern India”, Star News in 2011.

• “Best Government Engineering College”, Star News in 2011.

• Ranked 18th DQ CMR T-School Survey 2011.

• Ranked 12th overall and 8th for academic, Data Quest Survey 2011.

• 2nd prize in design category at the formula SAE-India Design Challenge – Society of Automotive Engineers (SAE-India).

• Ranked 1 by World Bank amongst all technical institutes of the country for project implementation.

• “Outstanding Engineering Institute” (East), ABP News in 2012.

• “Best Government Engineering College”, ABP News in 2012.

• Ranked 19th by Outlook-MDRA Engineering Colleges Survey 2012.

• Ranked 15th by DQ CMR T-School Survey 2012.

• “Outstanding Contribution to Education” to Prof. S. K. Sarangi, Director.

• The World Education Congress in 2012.

• Ranked 5th among the best universities of the country and 1067th position among World Universities by Cyber metrics survey in 2012 a Spain based research group.

• “Education Leadership Award” to Prof. S. K. Sarangi, Director, ET NOW in 2013.

• Ranked 1 among NITs and ranked 7th among all India Technical Institutions in Academic Environment.

• “Outstanding Engineering Institute (East)”, ABP News in 2013.

• “Best Government Engineering College” – ABP News in 2013.

• Ranked 11th by DQ-CMR Best Tech. School Survey 2013-14.

• Ranked 7th by Global Human Resource Development Centre, CSR Engineering Institute Survey 2014.

• “Outstanding Engineering Institute (East)” – ABP News in 2014.

• Ranked 9th in DQ-CMR, Top T-Schools, 2015.

• Ranked 13th in Careers 360, Outstanding Universities (Engineering Public), March 2015.

• Ranked 7th among Top Engineering Colleges of Super Excellence by CSR-GHRDC Survey – 2015.

• Ranked 12th in India (1st among all NITs) and 1621 Globally among overall Institutes of World in Webometrics ranking of world Universities.

• Ranked 111 in QS BRICS ranking – 2016 (Institutional Ranking among BRICS countries constituting Brazil, Russian, India, China, South Africa).

• Ranked 19th in NIRF 2016 ranking by MHRD.

VisionTo become an internationally acclaimed institution of higher learning that will serve as a source of knowledge and expertise for society and be a preferred destination for undergraduate and graduate studies.

MissionTo advance and spread knowledge in the area of Science & Technology leading to creation of wealth and welfare of humanity.

Quality PolicyEvery student and employee of NIT Rourkela as well as all external agencies providing service to the Institute shall strive to achieve quality, speed and economy (in that order of importance) in all their endeavors. They will employ and create TECHNOLOGY to enhance productivity, protect the environment and uphold human dignity.

Transparency PolicyEvery faculty, officer and staff of the institute shall perform his duties with complete transparency and will voluntarily share all information available to him with all stakeholders and the public.

Privileged information, such as question papers (before a test), personal data and confidential information of other organizations kept at the disposal of the institute will, however, remain protected as long as such protection is necessary for welfare of the stake holder.

Guiding Principles• Build an environment that is conducive to academic

pursuit, nurturing creative thoughts and inculcating a spirit of inquiry.

• Promote free exchange of knowledge and experience with others, while respecting each other’s right to intellectual property.

• Ensure quality, speed, economy and transparency in all spheres of our activities.

• Create a truly multicultural community and promote cultural bonding and teamwork among all.

• Provide opportunity to every member of the Institute for achieving academic excellence, developing all round personality and realizing his or her full potential.

• Adopt state of the art technology in all endeavors.

• Serve the society around, using the knowledge and expertise of the Institute.

Annual Report - 2016-17National Institute of Technology Rourkela

iv

NIT RourkelaProducing Technology &

Technologists for the nation.

ContentsVISION AND MISSION iv

LIST OF FIGURES

LIST OF TABLES

INTRODUCTION 02

Historical Background

Location

Campus Infrastructure

THE BOG AND OTHER COMMITTEES 03-06

Board of Governors

Finance Committee

Building & Works Committee

Members of the Senate

DEANs AND HODs 07

EDUCATION SYSTEM 08-13

B. Tech. / M. Tech. Dual Degree / Integrated M. Sc. Degree

Postgraduate Courses (M. Tech. / M. Sc. / MA / MBA – 2 Years duration)

Admission Procedure

Programme Structure

Registration

Research programmes (Ph. D. and M. Tech. (Res))

Results

M Sc, MA and MBA Programmes

ACADEMIC PROGRAMMES / COURSES OFFERED 14-19

B. Tech. Course offered at NIT Rourkela

M. Tech. Course offered at NIT Rourkela

Post Graduate Specialization in Business Administration

Post Graduation in Science and Arts

M. Tech. Dual Degree (B. Tech. and M. Tech. in 5 Years)

Course-wise Enrolment with Reservation Category (UG and PG)

Post Graduate Courses

TRAINING AND PLACEMENT AT NIT ROURKELA 20

Training and Placement Centre

DEPARTMENTS AND ACADEMIC UNITS 21-185

DEPARTMENT OF BIOTECHNOLOGY AND MEDICAL ENGINEERING 21-30

Faculty

Publication

Publications in Journals

Publications in Conferences

Papers Accepted for Publication

Books / Book Chapter

Patent

Awards Received / Distinction Achieved

By Faculty

By Students

Seminar, Symposia, Summer / Winter School, Short Term Course / Workshops conducted by the Department, Participation by Faculty Members

Research Projects

Consultancy Services

Institutional Programme Support / Centre of Excellence

List of Laboratories

Ph. D. Degrees awarded by the Department

DEPARTMENT OF CIVIL ENGINEERING 31-42

Faculty

Publication






By Faculty

By Students

Technical Association / Societies


Research Projects





M. Tech. Research Degrees awarded by the Department

DEPARTMENT OF CHEMICAL ENGINEERING 43-49

Faculty

Publication





By Students


Research Projects



DEPARTMENT OF CERAMIC ENGINEERING 49-55

Faculty

Publication




Patent


By Faculty



Research Projects





DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING 55-65

Faculty

Publication






By Faculty

By Students



Research Projects





DEPARTMENT OF CHEMISTRY 65-76

Faculty

Publication





Patent


By Faculty

By Students



Research Projects




DEPARTMENT OF EARTH & ATMOSPHERIC SCIENCES 76-82

Faculty

Publication





By Faculty



Research Projects



DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING 82-94

Faculty

Publication





Patent


By Faculty



Research Projects





DEPARTMENT OF ELECTRICAL ENGINEERING 94-102

Faculty

Publication





Patent


By Faculty

By Students



Research Projects





DEPARTMENT OF FOOD PROCESS ENGINEERING 103-108

Faculty

Publication




Research Projects


DEPARTMENT OF HUMANITIES AND SOCIAL SCIENCES 109-116

Faculty

Publication






By Faculty

By Students



Research Projects


DEPARTMENT OF INDUSTRIAL DESIGN 117-123

Faculty

Publication



Patent


By Faculty

By Students

Research Projects




M. Tech. Research Degrees awarded by the Department 124-133

DEPARTMENT OF LIFE SCIENCE

Faculty

Publication




Patent


By Faculty

By Students



Research Projects



DEPARTMENT OF MATHEMATICS 134-137

Faculty

Publication





DEPARTMENT OF MECHANICAL ENGINEERING 138-151

Faculty

Publication





Patent


By Faculty

By Students



Research Projects




DEPARTMENT OF METALLURGICAL & MATERIALS ENGINEERING 152-161

Faculty

Publication






Research Projects




DEPARTMENT OF MINING ENGINEERING 162-169

Faculty

Publication





By Faculty

By Students



Research Projects






DEPARTMENT OF PLANNING & ARCHITECTURE 170-173

Faculty


By Faculty


DEPARTMENT OF PHYSICS & ASTRONOMY 174-181

Faculty

Publication






Research Projects



SCHOOL OF MANAGEMENT 182-185

Faculty

Publication





By Faculty



Research Projects



ACADEMIC CENTRES 186-200

Computer Centre

Hardware Purchased

Software Purchased

Workshops

Biju Patnaik Central Library

Students Activity Centre (SAC) and Technical Clubs

Health Centre

STAFF POSITION 200-203

Administration and Scientific Officer positions

Teaching Staff

Non-Teaching Staff

CONVOCATION 203

MAJOR EQUIPMENT PURCHASED DURING THE FINANCIAL YEAR 2014-15 204

INTERNATIONAL RELATIONS AND COLLABORATION 205

HALL OF RESIDENCE 210-211

AUDIT REPORT 239

STATEMENT OF ACCOUNTS 246

ANNEXURE

Annexure 1: SIRE or Practical Training undertaken by students in industries during May-July, 2015 212

Annexure 2: Local Study Tours conducted (for students) 217

Annexure 3: Placement Record (for UG courses): 2014-15 218

Annexure 4: Fresh Appointments (Regular) 222

Annexure 5: Staff Relieved on Retirement 222

Annexure 6: Teaching Staff Relieved on Resignation 222

Annexure 7: Non-Teaching Staff Relieved on Resignation 223

Annexure 8: Staff Relieved on Voluntary Retirement 223

Annexure 9: Staff Expired 223

Annexure 10: Non-Academic Staff (Non-Teaching) 223

Annexure 11: Training Status (Staff members deputed / Sponsored for Training & Learning) 231

Annexure 12: Institute Gold Medals 232

Annexure 13: Institute Silver Medals (B. Tech.) 232

Annexure 14: Institute Silver Medals (M. Tech.) 232

Annexure 15: Institute Silver Medals (M. Sc., MA & Integrated M. Sc.) 233

Annexure 16: Institute Silver Medals (B. Tech. & M. Tech. Dual Degree) 233

Annexure 17: Endowment Medals and Awards 234

Annexure 18: Codes of different Departments and Offices 234

LIST OF TABLES

Table 1: Name and Contact Details of Board of Governors 03

Table 2: Name and Contact Details of Members of Finance Committee 04

Table 3: Name and Contact Details of Members of Building & Works Committee 04

Table 4: Details of Project Work, Seminar and Technical Writing 09

Table 5: Results of B. Tech. Programme (Graduation Batch 2016) 11

Table 6: Results of M. Tech. Dual Degree (Graduation Batch 2016) 11

Table 7: Results of M. Tech. Programme (Graduation Batch 2016) 12

Table 8: Results of All Programmes (Graduation Batch 2016) 13

Table 9: Details of Reservation Category break-up in number 17

Table 10: B. Tech. / B. Arch. Student Strength Year-wise 17

Table 11: Integrated M. Sc. (5 years) Student Strength Year-wise 18

Table 12: M. Tech. Dual Degree (5 years) Student Strength Year-wise 18

Table 13: M. Sc. / MBA / MA (2 years) Student Strength Year-wise 19

Table 14: M. Tech. (2 years) Student Strength Year-wise 19

Table 15: Sanctioned manpower of NIT Rourkela 201

Table 16: Details of Sanction of Officer Posts and position held as on 30th June 2015 201

Table 17: Details of number of faculty members as on 30th June 2015 (Department-wise) 202

Table 18: Different post of Supporting Staff in NIT Rourkela 202

Table 19: Major Equipments purchased during the academic year 204

Table 20: Participation of faculty members on collaboration with International Universities and attending conferences (International Travel only)

205

National Institute of Technology, Rourkela was established on 15th August, 1961 as Regional Engineering College jointly supported by Government of India and Government of Odisha. The college started with only three under-graduate programmes in the disciplines of Mechanical Engineering, Electrical Engineering and Civil Engineering and was affiliated to Utkal University in the beginning and later to Sambalpur University in 1967. The college had its natural growth over time and kept on adding programmes like Metallurgical & Materials Engineering (1963), Chemical Engineering (1963), Mining Engineering (1979), Computer Science & Engineering (1986), Applied Electronics & Instrumentation Engineering (1987), Ceramic Engineering (1994), Physics (1961), Chemistry (1962), and Mathematics (1965). The post graduate programmes and the research programmes in select branches were initiated. As it grew the college was made academically autonomous in 1992 but remained affiliated to Sambalpur University.

However the turn-around came on 26th June, 2002 when the college was declared as National Institute of Technology and was completely taken to the fold of Ministry of Human Resource Development, Government India as a centrally funded institution and was made a Deemed University. The administrative structure, the source of finance and the status of the institute got reformed. The objective was redefined. National Institute of Technology, Rourkela prepared itself for a giant leap in every front. The culture and the ethos of the institute took contemporary turn to promote healthy and productive attitudes towards learning, life and work and to develop ambitions of achievements; striving for the maximum for every stakeholder.

The NIT Act by Government of India came into force on 15th August, 2007 and the institute was declared as an Institute of National Importance. Working in the line of the Act, the institute went through a complete metamorphosis. The prime mover had been set to go through major transformation. The NIT era has so far been a great journey. New programmes like Communication Engineering (2005), Biotechnology and Medical Engineering (2007), Life Science (2009), Industrial Design (2010), MBA (2010), Development Studies (2010), Planning and Architecture (2013), Food Process Engineering (2013), Earth and Atmospheric Science (2013) and 27 different specializations in the post graduate programme of various disciplines have been added considering the market demand. In the coming academic session post graduate programmes in Polymers, Plastics and Wood Engineering under Mechanical Engineering and Business Intelligence and Analytics under Computer Science and Engineering Department will be started. Today NIT Rourkela stands to be the institute with the widest range of programmes among all NITs. New and innovative additions to the galaxy of curricula along-with increase in the intake capacity to every programme are attracting bright students from across the country. All academic programmes have been modified and expanded considering the present scenario of technological and scientific developments. The research programmes have been given grander emphasis. Sponsored research programmes are given a thrust and the highly motivated faculties are continuously trying to multiply it by manifold. The research programmes in all the Departments have seen phenomenal growth. The infrastructure, such as academic buildings, laboratory facilities, students’ hostels, faculty and staff residence, common facilities and conveniences have been created and are continuously scaled up to cater to the present as well as future needs.

National Institute of Technology Rourkela continues to be ranked as one of the top institutes of the country. The institute, now, is placed only amongst a few counted one. It attracts the best students from the country for its Bachelor’s, Master’s and Doctoral programmes, and in the 54 years of its existence, more than 18000 students have graduated from NIT Rourkela. The alumni of the institute have distinguished themselves through their achievements and contributions in diverse fields, and the engagement with the alumni continues to grow. Research is an increasing focus of activity of the institute coupled with strong efforts to see that the fruits of the research are translated into commerce through licensing or through startups. The institute continues to attract outstanding faculty members, and this is at the core of the growth of the institute. Presently, we have 275 faculty members – the largest by far among all the NITs – with many of them internationally reputed for their research contributions. It may be worth mentioning that NIT Rourkela is the first NIT to adopt IIT-like 4-Tier flexible faculty structure and has been attracting bright and reputed faculty into its fold. The Institute continues to build links with international and national peer universities to enhance research and educational programmes.

1. INTRODUCTION


02

Board of Governors (Ref: MHRD Order No. F.14-3/2011-TS.III, Dt. 31.03.2011)

Table 1: Name and Contact details of Board of Governors, NIT, Rourkela

Sl.No Name Contact No.1. Prof. Animesh Biswas

Acting Chairman & DirectorNational Institute of TechnologyRourkela -769 008 (Odisha)

0661- 2462001(0)/2472050(0)/2463001(O)Mob: 9437972455Fax: 2472926/ 2462022E. Mail:

2. Shri S. P. Goyal, IASJoint Secretary, Technical EducationGovernment of IndiaDept. of Secondary & Higher Education,Ministry of Human Resource Development,Sashtri Bhavan, New Delhi- 110 001.

011-23383451(O) 011-23382298(Fax) +91-9453050000(M) e-mail: [email protected]

3. Mrs. Darshana Momaya DabralJoint Secretary & Financial Advisor,MHRD, Govt. of India,Dept. of Secondary & Higher Education,Shastri Bhawan, New Delhi – 110 001.

Ph. No. 011-23382696Fax: 011-23070668email: [email protected]

4. Prof. (Ms) Shobhana NarasimhanProfessorTheoretical Sciences UnitJNCASR, Bangalore-560064

Ph: 080-22082833(O)/22082707(Secy.)Fax:08022082766M: 9880641962E-Mail: [email protected]

5. Prof.(Ms) Shobhona SharmaSenior Professor & Chairperson Department of Biological Sciences,Tata Institute of Fundamental Research(TIFR)HomiBhabha Road, Navy Nagar, Colaba Mumbai- 400005, INDIA

Tel:022-22782625/22782865/22782320(O)Fax: 022-22804610/22804611M: 9987260961Email: [email protected]

6. Shri Sanjay Kr. Singh, IASCommissioner-Cum-Secretary Skill Development & Technical Education Department, Govt. of Odisha, Odisha State Secretariat, Bhubaneswar-751 001.

Ph: 0674-2391319(O)Fax: 0674-2391324M: 08130585511Email: [email protected]

7. Prof. V. Chandrasekhar, Director National Institute of Science Education and Research (NISER), Institute of Physics Campus, Sachivalaya Marg,P.O.- Sainik School, Bhubaneswar, Orissa - 751 005

Ph: 0674-2304005 / 2741225(R) Fax: 0674-2304070M: 09415132221 Email [email protected], [email protected]

8. Prof. R V Raja KumarDirectorIndian Institute of Technology BhubaneswarToshali Bhawan, satyanagar, Bhubaneswar-751 013

Ph: 0674-2570334)Fax: 0674-2576004M: E-mail: [email protected]

9. Prof. Banshidhar MajhiProfessor, CSNational Institute of Technology, Rourkela.

Ph: 0661-2462355 (0), 2463355(R)M: 9437221124E. Mail: [email protected]

10. Prof. Hrushikesh NaikAssociate Professor, MNN.I.T., Rourkela.

0661-2462603(O)/ 0661-2463603(R)M: 9937115419Email: [email protected]

11. Prof. S. K. PatelRegistrar & Secretary, BOG, I/C.National Institute of TechnologyRourkela – 769 008(Orissa)

Tel: 0661-2462516(O)/2463516®/2476773 (O)Fax: 0661-2472926Mobile: 9437484951E. Mail: [email protected]/[email protected]

2. THE BOG AND OTHER COMMITTEES


03

Finance CommitteeTable 2: Name and Contact details of Members of Finance Committee

Sl.No Name Contact No.1. Prof. Animesh Biswas

Acting Chairman & DirectorNational Institute of TechnologyRourkela -769 008 (Odisha)

0661- 2462001(0)/2472050(0)/2463001(O)Mob: 9437972455Fax: 2472926/ 2462022E. Mail: [email protected]

2. Shri S. P. Goyal, IASJoint Secretary, Technical EducationGovernment of IndiaDept. of Secondary & Higher Education,Ministry of Human Resource Development,Sashtri Bhavan, New Delhi- 110 001.

011-23383451(O) 011-23382298(Fax) +91-9453050000(M) e-mail: [email protected]

3. Mrs. Darshana Momaya Dabral, Joint Secretary & Financial Advisor,MHRD, Govt. of India,Dept. of Secondary & Higher Education,Shastri Bhawan, New Delhi – 110 001.

Ph. No. 011-23382696Fax: 011-23070668email: [email protected]

4. Prof. (Ms) Shobhana Narasimhan,ProfessorTheoretical Sciences UnitJNCASR, Bangalore-560064

Ph: 080-22082833(O)/22082707(Secy.)Fax:08022082766M: 9880641962E-Mail: [email protected]

5. Prof. Hrushikesh NaikAssociate Professor, MEN.I.T., Rourkela.

0661-2462603(O)/ 0661-2463603(R)M: 9937115419Email: [email protected]

6. Prof. S. K. PatelRegistrar & Secretary, BOG, I/C.National Institute of TechnologyRourkela – 769 008(Orissa)

Tel: 0661-2462516(O)/2463516(R)/2476773(O)Fax: 0661-2472926Mobile: 9437484951E. Mail: [email protected]/[email protected]

Building & Work CommitteeTable 3: Name and Contact details of Members of Building & Works Committee

Sl. No. Name of the Members Contact No. & Email ID

1. Prof. Animesh Biswas, Director & Chairman, BWC, N.I.T., Rourkela

Ph:-0671-2462001(O)Fax:- 2472926Mob:- 9415132483, 9437972455Email: [email protected]

2. Mr. S.P. Goyal, Joint Secretary (TEL)Dept. of Secondary & Higher Education,Ministry of Human Resource Development,122B-C, Shastri Bhawan, New Delhi- 110001.

Ph:- 011- 23383451(O)Fax:- 011-23382298Mob:-09453050000Email:- [email protected]

3. Shri Ajaya Kr. Nayak, DGM PL No.917095Civil Engineering, Town Engineering Department,SAIL, RSP, Rourkela. Qr. No.C-2, Sector-1, Rourkela.

Mob:- 08895500078


04

Sl. No. Name of the Members Contact No. & Email ID

4. Shri Vinod Kr Shrivastava, DGM PL. No.041492Refrigeration & Air Conditioning, RSP,SAIL, RSP, RourkelaQr. No.B/ 56, Sector-5, Rourkela-769 002

Ph:-0661-25139639Mob:- 08895500102

5. Prof. B. Majhi,Professor, CSN.I.T., Rourkela.

Ph:- 0661-2462355(O)/2463355(R)Mob:-9437221124Email: bmajhi @nitrkl.ac.in

6. Prof. C. R. Patra Professor, CEDean (PD), NIT., Rourkela.

Ph:-0661-2462316(O)/ 2463316 (R)Mob:-9437085492Email: [email protected]

7. Prof. S.K. Patel, Registrar & Secretary I/c, BWC, NIT., Rourkela

Ph:-0661-2462021/ 2476773 (O)Fax: 0661-2462022Mob:- 9437484951Email: [email protected]

Members of the Senate

A) Director: 1. Prof. Animesh Biswas, Director - Chairman, Senate

2. Shri S. K. Patel, Registrar I/C - Secretary I/C., Senate

B) External: 3. Prof. R.K. Mishra, Electronics Science, - Member Berhampur University, Bhanja Vihar, Berhampur- 760007

4. Prof. P.K. Biswas - Member Department of E & ECE Engineering IIT, Kharagpur – 721 302

5. Prof. Padmabati Gahan - Member Department of BUSINESS ADMINISTRATION Sambalpur University, Jyoti Vihar Sambalpur, Odisha- 768019 (INDIA)

C) All Professors: 6. Prof.(Mrs) Krishna Parmanik, BM - Member 7. Prof. K.C. Patra, CE - Member 8. Prof. M. Panda, CE - Member 9. Prof. N. Roy, CE - Member 10. Prof. S.P.Singh, CE - Member 11. Prof. S. K. Sahu, CE - Member 12. Prof. C.R. Patra, CE - Member 13. Prof. R. K. Singh, CH - Member 14. Prof. S.K. Rath, CS - Member 15. Prof. B. Majhi, CS - Member 16. Prof. S. Bhattacharya, CR - Member 17. Prof. Japesh Bera, CR - Member 18. Prof. K.K. Mohapatra, EC - Member 19. Prof. S.K. Patra, EC - Member 20. Prof. S. Meher, EC - Member 21. Prof. J. K. Satapathy, EE - Member 22. Prof. B. Subudhi, EE - Member


05

23. Prof. A. K. Panda, EE - Member 24. Prof. B.B.Biswal, IT - Member 25. Prof. G.K.Panda, MA - Member 26. Prof. S. Chakravarty, MA - Member 27. Prof. K. C. Pati, MA - Member 28. Prof. B.K. Nanda, ME - Member 29. Prof. R.K. Sahoo, ME - Member 30. Prof. K.P. Maity, ME - Member 31. Prof. S.S. Mohapatra, ME - Member 32. Prof. D.R.K. Parhi, ME - Member 33. Prof. S. K. Acharya, ME - Member 34. Prof. S.K. Sahoo, ME - Member 35. Prof. B.B. Verma, MM - Member 36. Prof. B.C. Ray, MM - Member 37. Prof. S.C. Mishra, MM - Member 38. Prof. B.K. Pal, MN - Member 39. Prof. S. Jayanthu, MN - Member 40. Prof. D. P. Tripathy, MN - Member 41. Prof. S. Panigrahi, PH - Member

D) Invitees. 42. Prof. M K Gupta, Head, BM - Invitee 43. Prof. T.K. Dan, Head, EC - Invitee 44. Prof. S. Sarkar, Head, MM - Invitee 45. Prof. Ritwik Sarkar, Head,CR - Invitee 46. Prof. D.P.Mohapatra, Head, CS - Invitee 47. Prof. N.R.Mishra, Head, HS - Invitee 48. Prof. Pawan Kumar,Head, PH - Invitee 49. Prof. Saurav Chatterjee,Head, CY - Invitee 50. Prof. Bibekanand Mallick,Head, LS - Invitee 51. Prof. D.Bag, Head, SM - Invitee 52. Prof. Md. Rajik Khan, ID - Invitee 53. Prof. Md. Equinnuddin, ER - Invitee 54. Prof. Basudutta Sarkar, PA - Invitee 55. Prof. Sabyasachi Mishra, FP - Invitee 56. Prof. M R Barik, CE - Chief Warden 57. Mr. K. P. Panigrahi, Asst. Registrar, Academic(Res.) - Invitee 58. Mr. Ashis Kumar Behera, Asst. Registrar (UG & PG), - Invitee


06

DEANs AND HODs

List of DEAN as on 31.03.2017 1. Dean (FW) - Prof. B B Biswal, ID 2. Dean (SW) - Prof. D.R. K. Parhi, ME 3. Dean (Academic) - Prof. B. Majhi, CS 4. Dean (PD) - Prof. C.R. Patra, CE 5. Dean (SR) - Prof. G.K. Panda, MA 6. Dean (AR) - Prof. B. Subudhi, EE

List of Head of Departments as on 31.03.20171. Bio-Medical Engg. (BM) Prof. Mukesh Ku. Gupta2. Ceramic Engg. (CR) Prof. B. B. Nayak3. Chemical Engg. (CH) Prof. R. K. Singh4. Chemistry (CY) Prof. S. Chetterjee5. Civil Engg. (CE) Prof. S.K. Sahu6. Computer Science Engg. (CS) Prof. D. P. Mohapatra7. Earth & Atmospheric Sciences (EA) Prof. Md. Equinnuddin8. Electrical Engg. (EE) Prof. J K Satpathy9. Electronics & Communication Engg. (EC) Prof. K.K. Mohapatra10. Food Processing (FP) Prof. S. Mishra11. Humanities & Social Science (HS) Prof. Nihar Ranjan Mishra12. Industrial Design (ID) Prof. Md. Rajik Khan13. Life Science (LS) Prof. S.K. Bhutia14. Mathematics (MA) Prof. K. C. Pati15. Mechanical Engg. (ME) Prof. S.S. Mohapatra16. Metallurgical & Materials Engg. (MM) Prof. S.C. Mishra17. Mining Engg. (MN) Prof. M K Mishra18. Planning & Architecture (PA) Prof. (Ms.) Basudatta Sarkar19. Physics (PH) Prof. P. Kumar20. School of Management (SM) Prof. D. Bag21. Workshop (WS) Prof. Saurav Datta, ME


07

3. EDUCATION SYSTEMB. Tech. / M. Tech. Dual Degree / Integrated M. Sc. Degree

i) Admission Procedure Admission to all Undergraduate courses and 5-year Dual Degree / Integrated Degree Programmes is made in the Autumn

Semester at the first year level through the national JEE (main) examination and allocation of seats is made through the Central Seat Allocation Board (CSAB). Besides, a specified number of foreign nationals / NRI selected under the policy laid down by Government of India are admitted directly to the 1st year of any of the courses.

ii) Programme Structure The duration of the programme leading to B. Tech. degree is four years and Dual Degree B. Tech. & M. Tech. and Integrated

M. Sc. is five years. The curricula for the different degree programmes are proposed by the respective departments and recommended by the Undergraduate Programme Evaluation Committee (UGPEC) before being approved by the Senate. The departments also prepare the syllabus of each programme and constituent courses containing the scope of studies, detailed instructions to be imparted, course outcome and course objectives. The curricula and syllabi are approved by Senate.

All subjects have a Lecture-Tutorial-Practical (L-T-P) component to indicate the contact hours. The Tutorial (T) or Practical (P) component may be absent in certain courses. Separate pure laboratory subjects (O-O-P) may exist in certain cases as decided by the Senate. All subjects have a credit count ‘C’. Teachings of subjects are reckoned in terms of credits.

In each of the first two semesters, two credits are assigned for Extra Academic Activity (EAA) consisting of 3 hours activity per week. The EAA is chosen from N.S.S., N. C. C., or any other physical education approved by Senate. The curricula of B. Tech. programmes also includes compulsory Short-term Industrial or Research Experience (SIRE) of 8 weeks duration after 6th semester in any reputed industry, research organization or a reputed institute which is evaluated in the 7th semester. Research project carries a total of 10 credit distribution between 7th & 8th semester. The summary of credits assigned to research projects and seminar and technical writing is presented in Table-4.

Course Structure of M. Tech. Dual Degree from 1st to 6th semester is similar to B. Tech. courses of the department. The 7th & 8th semester typically contains five theory courses and three laboratory courses. SIRE is evaluated at the end of 7th semester. The research project starts on completion of 8th semester (during Summer Vacation which is evaluated at the end of 9th semester) and continues till end of 10th semester. The curricula of 9th & 10th semester constitute two theory courses, research project and seminar and technical writing. Total project credit is 40. The summary of credits assigned to research projects, seminar and technical writing is presented in Table-4.

iii) Registration Students are registered in 2nd year (3rd semester) at the end of 1st year on completion of following:

(a) Completion at least 40 credits of courses out of the prescribed course for the first two semesters and secured ‘P’ or higher grade.

(b) Obtain a Cumulative Grade Point Average (CGPA) of not lower than 5.70.

(c) If the CGPA at the end of the first year is between 5.00 and 5.69 (both inclusive), the student is permitted to suspend studies and resume it in the following year along with the next batch of students. The B. Tech. programme must then be completed within 6 years of the original admission. However, if the CGPA is less than 6.00 in the repeat year, the student needs to leave the Institute to pursue other academic avenues.

(d) While registering for 3rd, 5th or 7th semester, a student may register for backlog courses of 1st, 3rd or 5th semester and while registering for 4th, 6th or 8th semester, may register for backlog courses of 2nd, 4th or 6th semester. A student has to appear for both Mid-Semester and End-Semester examinations and the grades are awarded based on the marks of the examinations. The Teacher’s assessment component is carried forward from the original evaluation. The registration for backlog papers is done at the time of semester registration. Backlog courses are awarded one grade lower than the secured grade. (‘P’ grade remains as ‘P’ as exception).

(e) A student may opt to repeat a course in which case he/she need to attend classes, and there is no reduction of grade awarded. In such case they are not eligible for awards / medals and prizes which are based on academic performance. If regulations and examination schedule otherwise permit, a student may register for spring semester elective in autumn semester and vice-versa. A student may change an elective course if the pre-requisites are satisfied. If a student has completed 8 semesters of study but has ‘F’ grades in few course, he must register for them as full time courses and attend classes in term of 9th semester if time table permits. The time limit for completion of B. Tech. programme is 6 years.


08

(f) It is necessary for students to maintain a minimum CGPA of 6.00 at all times. If the CGPA falls below 6.00, he / she should enter into slow place programme in own interest. When a student of 1st semester gets a CGPA score below 6.00 or a student of any other semester scores CGPA below 6.00 for two consecutive semesters, parents are required to visit the Institute and are apprised of the position. Students of 3rd or higher semesters are permitted to register in the next semester only in slow pace, in such a manner that he has a possibility of improving his CGPA above 6.00. Parents and students give an undertaking that they are aware of the possibility of leaving the Institute. If at the end of 3rd consecutive semester, CGPA remains below 6.00; the student will enroll only in backlog courses with ‘P’ grade with no new course. If a student gets CGPA below 6.00 in the 4th consecutive semester, he / she must leave the Institute to pursue other avenues of study.

In truly exceptional circumstances, if the arithmetic of the grade card dictate that the required improvement can only be achieved in at least 2 semesters, the Senate, at its discretion may sanction 2 semesters instead of one to improve CGPA with a maximum of 4 new courses spanning over two semesters.

Table 4: Details of Project Work, Seminar and Technical Writing

Course Number of Semesters

Typical credit per semester

Total course credit

Project work credit

Semester assigned for project

Seminar & Technical

Writing creditB. Tech.(4 years)

8 23 – 30 210 – 220 10 7th & 8th 4

M. Tech. Dual Degree(5 years)

10 23 – 30 260 – 270 40 9th & 10th and summer term after

8th semester

8

Integrated M. Sc.(5 years)

10 21 – 30 260 – 270 16 7th, 8th, 9th & 10th

4

M. Tech.(2 years)

4 25 – 26 100 – 104 40 3rd & 4th 8

MBA(2 years)

4 26 – 29 110 3 4th 8

M. Sc.(2 years)

4 23 – 29 100 – 108 10 3rd & 4th 4

MA(2 years)

4 20 – 27 101 10 3rd & 4th 4

M. Tech. (R)(> 2 years)

4 – 8 16 – 26 > 160 > 78 All > 12

Ph. D.(> 3 years)

6 – 16 16 – 26 > 156 > 126 All > 16

Postgraduate Courses (M. Tech. / M. Sc. / MA / MBA – 2 Years duration)The M. Tech. regulation provides the necessary guidelines for the Postgraduate programme in Engineering of two years duration. Persons working in various organizations can join the same course in a slow pace spanning over 3 years duration. In such case the course work is of 2 years (4 semesters) duration and the third year is devoted for Research Project.

Similarly the MA / M. Sc. / MBA regulation provides guideline for these courses. The duration of MA / M. Sc. / MBA course is two years (broken up to four semesters) and 3 years for those admitted under slow pace category.

The institute offered 28 regular M. Tech., 4 M. Sc. (2 years), 3 MBA, and on MA in development studies programmes.

iv) Admission Procedure

M. Tech.The courses leading to M. Tech. degree are open to candidates who have obtained the requisite qualification with 60% marks or 6.50 CGPA in aggregate in the qualifying examination. Admission for the GATE qualified candidates is made through Common Admission Process called Central Counselling for Master’s of Technology (CCMT). When GATE qualified candidates are not available, admission is done on the basis of merit as detailed in M. Tech. regulation.


09

Relaxation up to 5% of marks or 0.5 CGPA is allowed by Senate for sponsored candidates with proven research or profession experience. Sponsored candidates are not eligible to receive scholarship even if they are qualified in GATE. These candidates should have total of minimum two years full time work experience in the sponsoring organization. There is no age restriction. However, preference is given to those who are below 45 years.

M. Sc. (Chemistry, Life Science, Mathematics and Physics)For admission to M. Sc., candidates must have required B. Sc. degree with the subject applied for as one of the subjects (either Pass or Honours), Mathematics in +2 levels is compulsory for Chemistry, Mathematics and Physics courses. The admission to the above programmes is made on the basis of career mark and through all India examination. [JAM]

M. A. (Development Studies)The requisite academic qualification for MA in Development Studies is B. Tech. / B. A. / B. Sc. / B. Com. With 55% marks or 6.00 CGPA. Amongst B. A. / B. Sc. / B. Com. applicants with honours are given preference. Admission to the programme is made on the basis of career mark.

M. B. A.The minimum eligibility criterion for admission to MBA is B. Tech. degree in any branch of engineering with 60% marks or 6.50 CGPA. Applicants who have qualified at national or international tests for admission to Business Schools and secured high scores get preference. Final selection is made on the basis of Group Discussion and Personal Interview conducted at the Institute, along with academic career and score of national or international tests for admission to Business Schools.

v) Programme StructureTeaching for the courses is reckoned in credits, as specified against each subject. Due credit is given to lecture, tutorial (theory) and practical components for a given subject. The first two semesters have theory and practical (laboratory) subjects and a compulsory Seminar and Technical Writing of 2 credits in each semester. The total course credits in the 1st and 2nd semester together range between 46 to 48 credits. The summer vacation constitute a part of the 3rd semester. The summer work (either industrial training or industrial project or any assigned work in the institute) carries 4 credits and this is evaluated in 3rd semester. The 3rd and 4th semester mostly constitute the project work. The comprehensive viva-voce is carried out based on all subjects taught in first two semesters. The complete course structures for M. Tech. prorgrammes of all departments are thoroughly reviewed in the PGPEC and recommendations are placed in the Senate for approval.

Project Work and Seminar and Technical Writing constitute an important aspect of the curricula. Details of credit and Seminar and Technical Writing are presented at Table-4.

Class Tests, assignments, tutorials, viva-voce, laboratory assignments, etc., are the constituent components of continuous assessment process and a student must fulfil all these requirements as prescribed by the teacher / coordination committee of the subject. If due to any compelling reason (such as participation in national / international events with due approval of the institute illness, calamity in the family, etc.) a student fails to meet any of the requirements within / on the scheduled date and time, the teacher / coordination committee may take such steps (including conduction of compensatory tests / examinations) as are deemed fit to ensure a fair assessment.

vi) RegistrationStudents in Postgraduate programmes register for the course at the beginning of each semester. The courses do not have summer / supplementary examination. Students securing ‘F’ grade in any course appear the examination in the following session. Attendance in all classes is compulsory and regulation is similar to Undergraduate course.

The summary of the results of the graduating students in Postgraduate studies is presented from Table-5 to Table-8.

Research Programmes (Ph. D. and M. Tech. [Res.])The minimum qualification required for admission to Ph. D. programmes in Engineering, Science, Management and Humanities and Social Sciences is one of the following:

(a) M. E. / M. Tech. / M. Pharm. in relevant discipline with at least 6.50 CGPA or 60 percent marks in aggregate in both B. Tech. (or M. Sc. / M. Pharm. / MCA) and M. Tech. from a recognized technical Institute or University.

(b) B. E. / B. Tech. / B. Pharm. / MCA or equivalent discipline with CGPA or 7.00 or 65% marks in aggregate.

(c) M. Sc. in Basic Sciences with CGPA 7.00 or 65% marks in aggregate in relevant disciplines.

(d) M.B.B.S. with CGPA 6.50 or 60% marks in aggregate.

(e) M. Sc. / M. A. / MBA / M. Com. / M. A. in Humanities and Social Sciences with CGPA 6.50 or 60% marks in aggregate.


10

Selection of candidates for M. Tech. (Res) is made on the basis of written test and / or interview conducted by the Department. The minimum qualification required for admission to M. Tech. (R) programme in Engineering, Science, Management or Social Sciences is one of the following:

(f) B. E. / B. Tech. / B. Pharm. / MCA or equivalent in relevant discipline with 60% marks in aggregate or 6.50 CGPA.

(g) M. Sc. in Basic Sciences with 60% marks in aggregate (or 6.50 CGPA) in relevant disciplines.

(h) M.B.B.S. with 60% marks in aggregate (or 6.50 CGPA).

(i) M. Sc. / M. A. / MBA / M. Com. in Humanities, Social Sciences or Management with 60% marks or 6.50 CGPA.

(j) Selections of candidates are made on the basis of interview conducted by the department concerned.

ResultsSummary of results of different academic programme is presented from Table-5 to Table-8.

B. Tech. ProgrammeTable 5: Results of B. Tech. Programme (Graduation Batch 2017)

Sl.No

Branch No. Regis. Graduated in 2017 Total Passed

% PassedHonours 1st Class 2nd Class

1 Biomedical 26+3* 6 16 1+2* 25 86.212 Biotechnology 23+3* 11 6+1* 1* 19 73.083 Civil Engineering 42+7* 20 20+5* 2* 47 95.924 Chemical Engineering 46+5* 18 25+1* 1+2* 47 92.165 Ceramic Engineering 28 10 11 0 21 756 Computer Science & Engineering 77+3* 31 37+2* 2 72 907 Electronics & Communication Engineering 37+2* 20 12+1* 1+1* 35 89.748 Electrical Engineering 60+3* 23 35 1+2* 61 96.839 Electronics & Instrumentation Engineering 32 18 11 0 29 90.6310 Food Process Engineering 19 8 10 0 18 94.7411 Industrial Design 28+1* 12 14+1* 0 27 93.112 Mechnical Engineering 94+2* 53 37+1* 0 91 94.7913 Metallurgical & Materials Engineering 42+5* 19 20+3* 1+2* 45 95.7414 Mining Engineering 33+2* 15 14 1* 30 85.71 TOTAL 623 264 283 20 567 91.01

*Students admitted prior to 2013 but graduated in 2017

Dual Degree B. Tech. & M. Tech. ProgrammeTable 6: Results of M. Tech. Dual Degree (Graduation Batch 2017)

Sl.No



1 CE3 : Transportation Engineering 8+1* 3+1* 4 1 9 100

2 CE4 : Water Resources Engineering 9 1 8 0 9 100

3 CH1 : Chemical Engineering 8 6 2 0 8 100

4 CR2 : Industrial Ceramics 9+2* 4 4+1* 1+1* 11 100

5 CS1 : Computer Science 10 3 5 0 8 80

6 CS2 : Information Security 9 3 5 0 8 88.89

7 EC2 : VLSI Design and Embedded Systems

9 4 4 0 8 88.89

8 EC5 : Communication & Networks 10 6 1 1 8 80

9 EE1 : Electronic Systems & Communication

8 3 3 1 7 87.5

10 EE3 : Control & Automation 8 2 5 0 7 87.5

11 EE4: Power Electronics & Drive 10 2 7 0 9 90


11

Sl.No



12 ME4 : Mechatronics & Automation 10 4 5 0 9 90

13 MM1 : Metallurgical & Materials Engineering

9+1* 3 4+1* 1 9 90

14 MN1 : Mining Engineering 7 1 5 0 6 85.71

TOTAL 128 46 64 6 116 90.63


M. Tech. ProgrammeTable 7: Results of M. Tech. Programme (Graduation Batch 2017)

Sl.No Branch No. Regis. Graduated in 2017

% Passed

1 BM1 : Biomedical Engineering 8 8 1002 BM2 : Biotechnology 12 12 1003 CE1 : Geotechnical Engineering 12+3* 12+3* 1004 CE2 : Structural Engineering 15+2* 14+2* 94.125 CE3 : Transportation Engineering 16 16 1006 CE4 : Water Resources Engineering 9+2* 9+2* 1007 CH1 : Chemical Engineering 9 9 1008 CH2 : Safety Engineering 18 18 1009 CR2 : Industrial Ceramics 10 8 8010 CS1 : Computer Science 18 18 10011 CS2 : Information Security 17+1* 17+1* 10012 CS3 : Software Engineering 12 11 91.6713 CS4 : Analytics & Decision Sciences 4 3 7514 EC2 : VLSI Design and Embedded Systems 16 16 10015 EC3 : Electronics and Instrumentation Engineering 13 13 10016 EC5 : Communication and Networks 16 16 10017 EC6 : Signal and Image Processing 17 16 94.1218 EE1 : Electronic Systems and Communication 18 17 94.4419 EE3 : Control and Automation 16 15 93.7520 EE4 : Power Electronics and Drives 16+2* 16+2* 10021 EE5 : Industrial Electronics 11 11 10022 ID1 : Industrial Design 17 17 10023 ME1 : Machine Design and Analysis 13+1* 12+1* 92.8624 ME2 : Production Engineering 15 15 10025 ME3 : Thermal Engineering 18+1* 18+1* 10026 ME5 : Cryogenic and Vacuum Technology 17+2* 17+2* 10027 ME6 : Plastic Composite & Timber Technology 12 12 10028 MM1 : Metallurgical and Materials Engineering 12 11 91.6729 MM2 : Steel Technology 13 13 10030 MN1 : Mining Engineering 8 8 100 TOTAL 422 412 97.63



12

M. Sc.,Integrated M.Sc, M. A. and M. B. A. ProgrammesTable 8: Results of All Programmes (Graduation Batch 2017)

Sl.No Branch No. Regis. Graduated in 2017 Total Passed % Passed

1st Class 2nd Class

1 SM1: School of Management 35 34 0 34 97.14

2 AG2: Applied Geology 20+1* 20+1* 0 21 100

3 AS2: Atmospheric Sciences 3 3 0 3 100

4 CY2: Chemistry 24 24 0 24 100

5 LS2: Life Science 20+1* 20+1* 0 21 100

6 MA2: Mathematics 18 16 2 18 100

7 PH2: Physics 19 16 1 17 89.47

8 HS1: Humanities 10+1* 8+1* 2 11 100

9 Chemistry 18+6* 10+2* 1+1* 14 58.33

10 Mathematics 14 8 1 9 64.29

11 Physics 17+6* 13+2* 4* 19 82.61



13

4. ACADEMIC PROGRAMMES / COURSES OFFERED

Courses Offered at NIT RourkelaB. Tech. - 4 years

B. Arch. - 5 years

M. Tech. - 2 years

M. Tech. Dual Degree - 5 years

M. Sc. - 2 years

M. Sc. Integrated Course - 5 years

M. A. Development Studies - 2 years

M. B. A. - 2 years

Ph. D.

B. Tech. Course Offered at NIT Rourkela

B. Tech.B. Arch (30) Electronics & Communication (35)Bio Medical (30) Electronics & Instrumentation (35)Bio-technology (30) Food Process (30)Ceramic (35) Industrial Design (30)Chemical (50) Mechanical (80)Civil (40) Metallurgical & Materials (50)Computer Science (70) Mining (35)Electrical (60)

M. Tech. Course Offered at NIT Rourkela

M. Tech.1. Biotechnology & Medical Engineering

• Biomedical Engineering• Biotechnology

2. Civil Engineering

• Geotechnical Engineering• Structural Engineering• Transportation Engineering• Water Resources Engineering

3. Chemical Engineering

• Chemical Engineering• Safety Engineering

4. Ceramic Engineering

• Industrial Ceramics

5. Computer Science & Engineering

• Computer Science• Information Security• Software Engineering


14

6. Electronics & Communication Engineering

• VLSI Design & Embedded Systems• Electronics & Instrumentation• Communication & Networks• Signal & Image Processing

7. Electrical Engineering

• Electronic Systems & Communications• Control & Automation• Power Electronics & Drives• Industrial Electronics

8. Industrial Design

9. Mechanical Engineering

• Machine Design & Analysis• Production Engineering• Thermal Engineering• Cryogenic & Vacuum Technology

10. Metallurgical & Materials Engineering

• Metallurgical & Materials Engineering• Steel Technology

11. Mining Engineering

Post Graduate Specialization in Business AdministrationM. B. A.

Human Resources Finance Marketing

Post-Graduation in Science and ArtsM. Sc. and M. A.

(30 seats in each specialization)

Applied Geology Mathematics M.A. in Development Studies

Atmospheric Science Physics

Chemistry Life Science

Integrated M. Sc. (5 Years) Course offered at NIT RourkelaM. Sc.

5 years Integrated Course (30 seats each)

Chemistry Mathematics Physics Life Science

M. Tech. Dual Degree (B. Tech. & M. Tech. in 5 Years)M. Tech. Dual Degree

B. Tech. & M. Tech. in 5 Years

1. Civil Engineering

• M. Tech. in Geotechnical• M. Tech. in Transportation• M. Tech. in Water Resources

2. Chemical Engineering

• M. Tech. in Chemical

3. Ceramic Engineering

• M. Tech. in Ceramic


15

4. Computer Science & Engineering

• M. Tech. in Computer Science• M. Tech. in Information Security

5. Electronics & Communication Engineering

• M. Tech. in Communication & Signal Processing

6. Electronics & Instrumentation Engineering

• M. Tech. in VLSI Design & Embedded Systems

7. Electrical Engineering

• M. Tech. in Electronic Systems & Communications• M. Tech. in Power Control & Drives• M. Tech. in Control & Automation

8. Mechanical Engineering

• M. Tech. in Mechatronics & Automation

9. Metallurgical & Materials Engineering

• M. Tech. in Metallurgical & Materials

10. Mining Engineering

• M. Tech. in Mining

Statistics of Students in Different Courses

30 | P a g e

o M. Tech. in Water Resources

2. Chemical Engineeringo M. Tech. in Chemical

3. Ceramic Engineeringo M. Tech. in Ceramic

4. Computer Science & Engineeringo M. Tech. in Computer Scienceo M. Tech. in Information Security

5. Electronics & Communication Engineeringo M. Tech. in Communication & Signal Processing

6. Electronics & Instrumentation Engineeringo M. Tech. in VLSI Design & Embedded Systems

7. Electrical Engineeringo M. Tech. in Electronic Systems & Communicationso M. Tech. in Power Control & Driveso M. Tech. in Control & Automation

8. Mechanical Engineeringo M. Tech. in Mechatronics & Automation

9. Metallurgical & Materials Engineeringo M. Tech. in Metallurgical & Materials

10. Mining Engineeringo M. Tech. in Mining

Statistics of Students in Different Courses

Course-wise Enrolment with Gender Break-up (UG & PG)

2%

44%

16%

10%1%

16%

4%6% 1% 0%

Total Student Strength is 5660B.ArchB.TechM.TechM.Tech (Dual)M.Tech (Res.)Ph.DM.Sc.M.Sc. IntegratedMBAMA

Course-wise Enrolment with Gender Break-up (UG & PG)

31 | P a g e

Course-wise Enrolment with Reservation Category (UG & PG)

Table 9: Details of Reservation Category break-up in number

Sl.NoProgramme Name OP OPPH SC SCPH ST STPH BC BCPH Foreign Strength Female Male

1 B.Arch 8 1 2 0 2 0 4 0 0 17 5 12

2 B.Tech 244 7 78 2 42 0 156 5 64 598 478 120

3Intergated M.Sc 26 1 8 0 6 0 12 0 0 53 15 38

4

Dual Degree B.Tech & M.Tech 58 2 20 0 11 0 35 1 5 132 32 100

5 M.Tech 203 2 80 1 25 0 172 1 2 486 103 102

6 M.Sc 67 0 23 0 8 0 46 0 0 144 55 89

7 MA 4 1 0 0 0 0 3 0 0 8 3 5

8 MBA 30 0 0 0 2 0 7 0 0 39 7 32

9 Ph.D. 112 0 7 0 2 0 31 0 0 152 49 103

10 M.Tech.(R) 3 0 0 0 0 0 0 0 0 3 1 2

Total 755 14 218 3 98 0 466 7 71 1477 748 603

Table 10: (A) B. Tech. Student strength year-wise

Branch Code

1st Year (2016) 2nd Year (2015) 3rd Year (2014) 4th Year (2013)

TOTALSanctioned Strength

Actual +Foreig

nSanctioned

StrengthActual +Forei

gnSanctioned

StrengthActual

+ForeignSanctioned

StrengthActual

+Foreign

BM 30 19 + 1 30 19 30 23 30 24 86

BT 30 25 + 1 30 24 30 23 30 23 96

CR 35 25 35 30 + 1 35 32 35 28 116

CH 50 42 + 3 50 46 + 1 50 46 + 2 50 47 + 1 188

0%

20%

40%

60%

80%

100%

B.A

rch

B.Te

ch

M.T

ech

M.T

ech

(Dua

l)

M.S

c

Int.

M.S

c

MBA M

A

601885 726 557

153258 55

9

28472 194 109

9696 22

9

Male Female


16

Course-wise Enrolment with Reservation Category (UG & PG)Table 9: Details of Reservation Category break-up in number

Sl. No

Programme Name OP OPPH SC SCPH ST STPH BC BCPH Foreign Strength Female Male

1 B.Arch 8 1 2 0 2 0 4 0 0 17 5 12

2 B.Tech 244 7 78 2 42 0 156 5 64 598 478 120

3Intergated M.Sc 26 1 8 0 6 0 12 0 0 53 15 38

4

Dual Degree B.Tech & M.Tech 58 2 20 0 11 0 35 1 5 132 32 100

5 M.Tech 203 2 80 1 25 0 172 1 2 486 103 102

6 M.Sc 67 0 23 0 8 0 46 0 0 144 55 89

7 MA 4 1 0 0 0 0 3 0 0 8 3 5

8 MBA 30 0 0 0 2 0 7 0 0 39 7 32

9 Ph.D. 112 0 7 0 2 0 31 0 0 152 49 103

10 M.Tech.(R) 3 0 0 0 0 0 0 0 0 3 1 2

Total 755 14 218 3 98 0 466 7 71 1477 748 603

Table 10: (A) B. Tech. Student strength year-wise

Branch Code

1st Year (2016) 2nd Year (2015) 3rd Year (2014) 4th Year (2013)TOTALSanctioned

Strength Actual

+ForeignSanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

BM 30 19 + 1 30 19 30 23 30 24 86

BT 30 25 + 1 30 24 30 23 30 23 96

CR 35 25 35 30 + 1 35 32 35 28 116

CH 50 42 + 3 50 46 + 1 50 46 + 2 50 47 + 1 188

CE 40 38 + 5 40 39 + 2 40 37 + 4 40 38 + 6 169

CS 70 70 + 20 70 66 + 2 70 69 + 22 70 68 + 9 326

EC 35 35 + 9 35 35 + 1 35 31 + 4 35 35 + 3 153

EI 35 34 + 1 35 34 35 34 35 32 135

EE 60 59 + 6 60 56 + 1 60 60 60 59 + 2 243

ID 30 22 30 29 30 26 30 28 105

ME 80 77 + 13 80 77 + 2 80 74 + 10 80 78 + 17 348

MM 50 40 50 48 50 46 50 43 177

MN 35 31 + 5 35 33 + 1 35 33 35 32 + 1 136

FP 30 16 30 15 30 26 30 22 79


17

(B) B. Arch. Student strength year-wise

Department1st Year (2016) 2nd Year (2015) 3rd Year (2014) 4th Year (2013) 5th Year (2012)

TOTALSanctioned Actual Sanctioned Actual Sanctioned

Actual +Foreign

Sanctioned Actual

+ForeignSanctioned Strength

Actual +Foreign

Architecture 20 17 20 16 30 26 + 1 30 28 - - 88

Table 11: Integrated M. Sc. (5 Years) Student strength year-wise

Branch Code1st Year 2nd Year 3rd Year 4th Year 5th Year

TotalSanctioned Actual Sanctioned Actual Sanctioned Actual Sanctioned Actual Sanctioned Actual

CY 30 14 30 21 30 28 30 24 30 18 105LS 30 12 30 16 30 18 30 11 57MA 30 13 30 17 30 24 30 20 30 16 90PH 30 14 30 23 30 25 30 23 30 17 102

Table 12: M. Tech. Dual Degree (5 Years) Student strength year-wise

Department

1st Year (2016) 2nd Year (2015) 3rd Year (2014) 4th Year (2013) 5th Year (2012)

TOTALSanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

Sanctioned Strength

Actual +Foreign

Transportation

Engineering10 9 10 9 10 10 10 9 10 8 45

Water Resources

Engineering10 10 10 10 10 10 10 10 10 10 50

Chemical Engineering 10 10 10 9 + 1 10 9 + 1 10 9 10 8 47

Industrial Ceramic 10 7 10 8 10 8 10 10 10 9 42

Computer Science 10 10 + 2 10 10 + 2 10 10 + 2 10 10 + 1 10 9 56

Information Security 10 9+2 10 9+2 10 10 + 1 10 10 + 1 10 9 53

VLSI Design and

Embedded System10 9 10 9 10 10 10 9 10 9 46

Communication and

Networks10 10 10 9 10 10 10 10 + 1 10 10 50

Electronic Systems

and Communication10 10 10 9 10 10 10 8 10 8 45

Control and

Automation10 9 10 7 10 10 10 10 + 1 10 9 46

Power Electronics and

Drive10 9 10 10 10 10 10 9 10 10 48

Mechatronics and

Automation10 10 + 1 10 10 10 10 10 10 10 10 51

Metallurgical and

Materials Engineering10 7 10 7 10 9 10 10 10 9 42

Mining Engineering 10 8 10 10 10 10 10 8 10 9 45


18

Table 13: M. Sc. / MBA / MA (2 Years) Student strength year-wise

Branch 1st Year 2nd Year

TotalSanctioned Actual Sanctioned Actual

M. Sc.AG2: Applied Geology 30 27

2220 47

AS2: Atmospheric Science 15 11 2 13CY2 : Chemistry 30 25 22 24 49LS2 : Life Science 30 27 30 21 48MA2 : Mathematics 30 26 22 18 44PH2 : Physics 30 28 22 20 48Total (M. Sc.) 165 144 118 83 227HS1 : MA in Developmental Studies 30 8 30 10 18SM1 : School of Management 60 39 60 35 74

Table 14: M. Tech. (2 Years) Student strength year-wise

Courses1st Year 2nd Year

TotalSanctioned Actual Sanctioned Actual

BM1: Biomedical Engineering 25 10 25 8 18

BM2: Biotechnology 25 12 25 12 24

CE1: Geotechnical Engineering 25 18 25 15 33

CE2: Structural Engineering 25 21 25 18 39

CE3: Transportation Engineering 25 20 25 17 37

CE4: Water Resources Engineering 25 18 25 11 29

CH1: Chemical Engineering 25 10 25 10 20

CH2: Safety Engineering 30 14 30 18 32

CR2: Industrial Ceramics 25 12 25 10 22

CS1: Computer Science 25 18 25 19 37

CS2: Information Security 25 16 25 16+2 34

CS3: Software Engineering 25 19 25 12+1 32

CS4: Analytics and Decision Sciences 20 9 20 8 17

EC2: VLSI Design & Embedded Systems 25 15 25 16 31

EC3: Electronics & Instrumentation Engineering 25 16 25 14 30

EC5: Communication & Networks 25 17 25 17 34

EC6: Signal & Image Processing 25 18 25 18 36

EE1: Electronic Systems & Communication 25 18 25 18 36

EE3: Control & Automation 25 18 25 19 37

EE4: Power Electronics & Drives 25 15 25 17 32

EE5: Industrial Electronics 25 19 25 12 31

ID1: Industrial Design 25 18 25 17 35

ME1: Machine Design & Analysis 25 17 25 14 31

ME2: Production Engineering 25 19 25 16 35

ME3: Thermal Engineering 25 17 25 20 37

ME5: Cryogenic & Vacuum Technology 25 19 25 17 36

ME6: Plastic & Polymer Technology 25 12 25 12 24

MM1: Metallurgical & Materials Engineering 25 16 25 13 29

MM2: Steel Technology 25 17 25 13 30

MN1 : Mining Engineering 25 14 25 8 22

Total 750 482 750 407 920


19

5. TRAINING AND PLACEMENTTraining and Placement Centre:The Training and Placement Centre has been actively performing and coordinating a number of professional activities for the students. Some of the major activities relating to the students are Practical Training, Local Study Tours to industries and Campus Placement. Like previous years the Centre had a series of such activities during the academic year 2016-17.

Practical Training:Practical Training is an integral part of engineering education that aims at making students familiar with the culture and environment of industries and getting practical knowledge on working of equipments, plants and processes which cannot be accommodated or explained in a laboratory. Students are exposed to the concept of plant management and organization at first hand. Practical Training for 766 B.Tech. and M. Tech. (Dual Degree) students were arranged in 243 different organizations/industries throughout the country during May-July 2016 who had completed pre-final year studies. Eight weeks of Practical Training at the end of 3rd Year are completed by each student before appearing at the final examination.

List of industries where students were deputed for SIRE is presented at Annexure-1 SIRE or Practical Training undertaken by students in industries during May-July, 2016.

Local Study ToursLocal Study Tours were arranged for B. Tech. and M. Tech. (Dual Degree) students in their 3rd year and final year by the Training & Placement Centre. The students visited different industries / organizations in and around Rourkela pertinent to their respective curricula during the period September, 2015 – March, 2016, as detailed in Annexure-2.

Campus PlacementDuring the academic session 2015-16, 139 Companies from different sectors visited our institute for campus placement. In all 998 offers have been issued to our students. The list of companies who visited the institute and the record of placement for the academic year 2015-16 are presented in Annexure-3.


20

6. DEPARTMENTS AND ACADEMIC UNITS

Department of BIOTECHNOLOGY AND MEDICAL ENGINEERING

Student Intake in 2016-17

36 | P a g e




Total Student Strength

Placement Statistics

2022

3

26

0

5

10

15

20

25

30

B.Tech. M.Tech (2 Years) Ph.D.

BM BT

8696

1824

0

20

40

60

80

100

120

BM BT

B.Tech M.Tech ( 2 Years)


36 | P a g e






2022

3

26

0

5

10

15

20

25

30

B.Tech. M.Tech (2 Years) Ph.D.

BM BT

8696

1824

0

20

40

60

80

100

120

BM BT

B.Tech M.Tech ( 2 Years)


21


BIO Medical Engineering

37 | P a g e


BIO Technology

FACULTY

SL Name & Specialization1 Prof. Mukesh K. Gupta ([email protected])

Associate Professor, Ph.D. (Konkuk University, S. Korea)(Head of the Department) , Animal Biotechnology, Genetic Engineering, Transgenesis, Assisted Reproductive Technologies, Animal Cloning, Stem Cells.

2. Prof. Krishna Pramanik ([email protected])

2

1 1 1

2

4

0

0.5

1

1.5

2

2.5

3

3.5

4

4.5

Aakash Institute Avanti Fellows iBooks Pradan Siemens TCS

2

1 1 1 1

5

0

1

2

3

4

5

6

Aakash Institute Affine Analytics Avanti Fellows Pradan Siemens TCS

BIO Technology

37 | P a g e


BIO Technology

FACULTY

SL Name & Specialization1 Prof. Mukesh K. Gupta ([email protected])

Associate Professor, Ph.D. (Konkuk University, S. Korea)(Head of the Department) , Animal Biotechnology, Genetic Engineering, Transgenesis, Assisted Reproductive Technologies, Animal Cloning, Stem Cells.

2. Prof. Krishna Pramanik ([email protected])

2

1 1 1

2

4

0

0.5

1

1.5

2

2.5

3

3.5

4

4.5

Aakash Institute Avanti Fellows iBooks Pradan Siemens TCS

2

1 1 1 1

5

0

1

2

3

4

5

6

Aakash Institute Affine Analytics Avanti Fellows Pradan Siemens TCS

FACULTYSL Name & Specialization1

Prof. Mukesh K. Gupta ([email protected])Associate Professor, Ph.D. (Konkuk University, S. Korea)(Head of the Department), Animal Biotechnology, Genetic Engineering, Transgenesis, Assisted Reproductive Technologies, Animal Cloning, Stem Cells.

2. Prof. Krishna Pramanik ([email protected])Professr, Ph.D. (Calcutta University)Nanobiotechnology / Nanomedicine, Biomaterial & Tissue Engineering, Stem cell Biology

3 Prof. Subhankar Paul ([email protected])Associate Professor, Ph.D. (IIT Delhi) Nanotechnology in Cancer Therapy, Biosensing, Biomolecule-based Nanostructure Development & Bioapplication

4 Prof. Indranil Banerjee ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Regenerative Medicine & Tissue Engineering, Biomicrofluidics, Theranostics Systems


22

SL Name & Specialization5 Prof. Kunal Pal ([email protected])

Assistant professor, Ph.D. (IIT Kharagpur)Biomedical Signal Processing, Biomedical Instrumentation, Soft materials, Controlled Drug Delivery Systems, Tissue Engineering

6 Prof. Nandini Sarkar ([email protected])Assistsnt Professor,Ph.D. (IIT Guwahati)Protein Misfolding and Aggregation, Protein Engineering

7 Prof. Amit Biswas ([email protected])Assistant professor, Ph.D. (IIT Kharagpur) Biomaterials, Surface Engineering, Corrosion and Oxidation of Materials

8 Prof. Angana SarkarEnvironmental Microbiology, Ecology and Biotechnology

9 Prof. A.Thirugnanam ([email protected])Assistant professor, Ph.D. (IIT Madras) Biomechanics, Biotransport, Biomaterials

10 Prof. Devendra Verma ([email protected])Assistant proefessor, Ph.D. (North Dakota State University , ND, USA)Tissue Engineering, Wound Healing and Wound Management

11 Prof. Kasturi Dutta Bioprocess development for industrially important products, Enzymology, Bioenergy,

12 Prof. Nivedita Patra ([email protected])Assistant professor, Ph.d. (IIT Delhi)Bioprocess Engineering

13 Prof. P. Balasubramanian (([email protected])Assistant Professor, Ph.D. (IIT Madras)Agriculture and Environmental Biotechnology

14 Prof. Bibhukalyan Prasad Nayak ([email protected])Assistant Professor, MBBS, MMST (IIT Kharagpur)Regenerative Medicine, Neurodegenerative Disorders, Bioinformatics, Rehabilitative Tissue

15 Prof. Sirsendu Sekhar Ray ([email protected])Assistant Professor, MBBS, MMST (IIT Kharagpur)Tissue Engineering, Cryobiology, Nanobiotechnology

PUBLICATION

Publications in Journals• Sarkar, A. Sar, P. Islam, E., Hexavalent Chromium Reduction by Microbacterium oleivorans A1: A Possible Mechanism of

Chromate-Detoxification and-Bioremediation. Recent patents on biotechnology 2015, 9 (2), 116-129.

• Mohapatra, B.; Sarkar, A. Joshi, S. Chatterjee, A. Kazy, S. K. Maiti, M. K. Satyanarayana, T. Sar, P., An arsenate-reducing and alkane-metabolizing novel bacterium, Rhizobium arsenicireducens sp. nov., isolated from arsenic-rich groundwater. Archives of microbiology 2017, 199 (2), 191-201.

• Jena, S.; Sakhare, G. M. Panda, S. K.; Thirugnanam, A., Evaluation and Prediction of Human Gait Parameters Using Univariate, Multivariate And Stepwise Statistical Methods. Journal of Mechanics in Medicine and Biology 2017, 1750076.

• Vyas, V.; Kaur, T.; Thirugnanam, A., Chitosan composite three dimensional macrospheric scaffolds for bone tissue engineering. International Journal of Biological Macromolecules 2017.

• Kaur, T.; Kulanthaivel, S.; Thirugnanam, A.; Banerjee, I.; Pramanik, K., Biological and mechanical evaluation of poly (lactic-co-glycolic acid)-based composites reinforced with 1D, 2D and 3D carbon biomaterials for bone tissue regeneration. Biomedical Materials 2017, 12 (2), 025012.

• Vyas, V.; Kaur, T.; Kar, S.; Thirugnanam, A., Biofunctionalization of commercially pure titanium with chitosan/hydroxyapatite biocomposite via silanization: evaluation of biological performances. Journal of Adhesion Science and Technology 2017, 31 (16), 1768-1781.

• Kaur, T.; Thirugnanam, A.; Pramanik, K., Effect of carboxylated graphene nanoplatelets on mechanical and in-vitro biological properties of polyvinyl alcohol nanocomposite scaffolds for bone tissue engineering. Materials Today Communications 2017, 12, 34-42.


23

• Majumder, O.; Bankoti, A. K. S.; Kaur, T.; Thirugnanam, A.; Mondal, A. K., The influence of silane and silane–PMMA coatings on the in vitro biodegradation behavior of AE42 magnesium alloy for cardiovascular stent applications. RSC Advances 2016, 6 (109), 107344-107354.

• Ramajayam, K.; Kumar, A.; Sarangi, S.; Thirugnanam, A., A Novel Adjuvant-Solution Layer Strategy for Improving the Efficacy of Cryosurgery. CryoLetters 2016, 37 (5), 346-356.

• Ramajayam, K.; Kumar, A.; Sarangi, S.; Thirugnanam, A., A numerical study on optimising the cryosurgical process for effective tumour necrosis. Heat and Mass Transfer 2017, 53 (5), 1685-1697.

• Thiagarajan, J.; Srividya, P.; Balasubramanian, P., Thermogravimetric and Decomposition analysis of Jatropha, Castor and Pongamia Deoiled seed cakes. International Journal of Innovations in Engineering and Technology, 7 (2) 2016, 417-425.

• Aly, N.; Balasubramanian, P., Effect of Geographical Coordinates on Carbon Dioxide Sequestration Potential by Microalgae. International Journal of Environmental Science and Development 2017, 8 (2), 147.

• Thiagarajan, J.; Srividya, P.; Balasubramanian, P., Thermal Behavior and Pyrolytic Kinetics of De-Oiled Jatropha Seed Cake. International Journal of Innovations in Engineering and Technology, 7(2):417-425.

• Biswas, P.; Karn, A. K.; Kale, P. G.; Balasubramanian, P., Biosensor for detection of dissolved chromium in potable water: A review. Biosensors and Bioelectronics 2017.

• Rangabhashiyam, S.; Balasubramanian, P., Lignocellulosic biosorbents for the removal of hexavalent chromium from aqueous solutions: A review, Journal of Environment and Biotechnology Research 2016, 5(1), 39-46.

• Buriuli, M.; Verma, D., Polyelectrolyte Complexes (PECs) for Biomedical Applications. In Advances in Biomaterials for Biomedical Applications, Springer: 2017, pp 45-93.

• Yadav, I.; Rathnam, V. S.; Yogalakshmi, Y.; Chakraborty, S.; Banerjee, I.; Anis, A.; Pal, K., Synthesis and characterization of polyvinyl alcohol-carboxymethyl tamarind gum based composite films. Carbohydrate Polymers 2017, 165, 159-168.

• Yadav, I.; Kasiviswanathan, U.; Soni, C.; Paul, S. R.; Nayak, S. K.; Sagiri, S. S.; Anis, A.; Pal, K., Stearic Acid Modified Stearyl Alcohol Oleogel: Analysis of the Thermal, Mechanical and Drug Release Properties. Journal of Surfactants and Detergents 2017, 20 (4), 851-861.

• Shaw, G. S.; Pandey, P. M.; Yogalakshmi, Y.; Banerjee, I.; Al-Zahrani, S.; Anis, A.; Pal, K., Synthesis and Assessment of Novel Gelatin–Chitosan Lactate Cohydrogels for Controlled Delivery and Tissue Engineering Applications. Polymer-Plastics Technology and Engineering 2017, 1-11.

• Shaw, G. S.; Biswal, D.; Banerjee, I.; Pramanik, K.; Anis, A.; Pal, K., Preparation, Characterization and Assessment of the Novel Gelatin–tamarind Gum/Carboxymethyl Tamarind Gum-Based Phase-Separated Films for Skin Tissue Engineering Applications. Polymer-Plastics Technology and Engineering 2017, 56 (2), 141-152.

• Pandey, P. M.; Nayak, S. K.; Shaw, G. S.; Uvanesh, K.; Banerjee, I.; Al-Zahrani, S.; Anis, A.; Pal, K., An in-Depth Analysis of the Swelling, Mechanical, Electrical, and Drug Release Properties of Agar–Gelatin Co-Hydrogels. Polymer-Plastics Technology and Engineering 2017, 56 (6), 667-677.

• Pandey, P. M.; Nayak, S. K.; Shaw, G. S.; Uvanesh, K.; Banerjee, I.; Al-Zahrani, S.; Anis, A.; Pal, K., An in-Depth Analysis of the Swelling, Mechanical, Electrical, and Drug Release Properties of Agar–Gelatin Co-Hydrogels. Polymer-Plastics Technology and Engineering 2017, 56 (6), 667-677.

• Kulanthaivel, S.; VS, S. R.; Agarwal, T.; Pradhan, S.; Pal, K.; Giri, S.; Maiti, T. K.; Banerjee, I., Gum tragacanth–alginate beads as proangiogenic–osteogenic cell encapsulation systems for bone tissue engineering. Journal of Materials Chemistry B 2017, 5, 4177-4189.

• Kodela, S. P.; Pandey, P. M.; Nayak, S. K.; Uvanesh, K.; Anis, A.; Pal, K., Novel agar–stearyl alcohol oleogel-based bigels as structured delivery vehicles. International Journal of Polymeric Materials and Polymeric Biomaterials 2017, 66 (13), 669-678.

• Dhal, S.; Mohanty, A.; Yadav, I.; Uvanesh, K.; Kulanthaivel, S.; Banerjee, I.; Pal, K.; Giri, S., Magnetic nanoparticle incorporated oleogel as iontophoretic drug delivery system. Colloids and Surfaces B: Biointerfaces 2017, 157, 118-129.

• Yadav, I.; Shaw, G. S.; Nayak, S. K.; Banerjee, I.; Shaikh, H.; Al-Zahrani, S.; Anis, A.; Pal, K., Gelatin and amylopectin-based phase-separated hydrogels: An in-depth analysis of the swelling, mechanical, electrical and drug release properties. Iranian Polymer Journal 2016, 25 (9), 799-810.

• Singh, V.; Uvanesh, K.; Behera, R. R.; Baruah, S.; Agarwal, T.; Banerjee, I.; Pal, K., Effect of Polysaccharides on the Properties of the Mucoadhesive Poly (Vinyl Alcohol) Multicore–Shell Microparticles. Polymer-Plastics Technology and Engineering 2016, 55 (9), 879-888.

• Pandey, S.; Senthilguru, K.; Uvanesh, K.; Sagiri, S.; Behera, B.; Babu, N.; Bhattacharyya, M.; Pal, K.; Banerjee, I., Natural gum modified emulsion gel as single carrier for the oral delivery of probiotic-drug combination. International Journal of Biological Macromolecules 2016, 92, 504-514.

• Roy, S.; Mohanty, M.; Pasayat, S.; Majumder, S.; Senthilguru, K.; Banerjee, I.; Reichelt, M.; Reuter, H.; Sinn, E.; Dinda, R., Synthesis, structure and cytotoxicity of a series of Dioxidomolybdenum (VI) complexes featuring Salan ligands. Journal of Inorganic Biochemistry 2017, 172, 110-121.


24

• Mallick, S.; Shaw, G.; Uvanesh, K.; Biswal, D.; Nayak, S.; Sagiri, S.; Singh, V.; Bhattacharya, M.; Anis, A.; Pal, K., An In-depth Analysis of the Mechanical, Electrical, and Drug Release Properties of Gelatin–Starch Phase-Separated Hydrogels. Polymer-Plastics Technology and Engineering 2016, 55 (16), 1731-1742.

• Agarwal, T.; Narayan, R.; Maji, S.; Behera, S.; Kulanthaivel, S.; Maiti, T. K.; Banerjee, I.; Pal, K.; Giri, S., Gelatin/Carboxymethyl chitosan based scaffolds for dermal tissue engineering applications. International Journal of Biological Macromolecules 2016, 93, 1499-1506.

• Agarwal, T.; Kabiraj, P.; Narayana, G. H.; Kulanthaivel, S.; Kasiviswanathan, U.; Pal, K.; Giri, S.; Maiti, T. K.; Banerjee, I., Alginate bead based hexagonal close packed 3D implant for bone tissue engineering. ACS applied materials & interfaces 2016, 8 (47), 32132-32145.

• Pallavi, P.; Kumar, G. M., Synthesis and characterization of films based on cross linked blends of poly (vinylalcohol) and poly (vinylpyrrolidone) with glutaraldehyde for tissue engineering application. Materialwissenschaft und Werkstofftechnik 2017, 48 (6), 611-622.

• Pushp, P.; Ferreira, F. C.; Cabral, J. M. S.; Gupta, M. K., Improved survival of cardiac cells on surface modified electrospun nanofibers. Polymer Science, Series A 2017, 59 (4), 515-523.

• Kumari, N.; Gupta, M. K.; Singh, R. K., Open encapsulation-vitrification for cryopreservation of algae. Cryobiology 2016, 73 (2), 232-239.

• Das, T.; Kolli, V.; Karmakar, S.; Sarkar, N., Functionalisation of Polyvinylpyrrolidone on Gold Nanoparticles Enhances Its Anti-Amyloidogenic Propensity towards Hen Egg White Lysozyme. Biomedicines 2017, 5 (2), 19.

• Chatterjee, R.; Kolli, V.; Sarkar, N., Trehalose and Magnesium Chloride Exert a Common Anti-amyloidogenic Effect Towards Hen Egg White Lysozyme. The Protein Journal 2017, 36 (2), 138-146.

• Mahanta, S.; Prathap, S.; Ban, D. K.; Paul, S., Protein functionalization of ZnO nanostructure exhibits selective and enhanced toxicity to breast cancer cells through oxidative stress-based cell death mechanism. Journal of Photochemistry and Photobiology B: Biology 2017.

• Panda, P. K. Behera, B.; Meher, B. R.; Das, D. N.; Mukhopadhyay, S.; Sinha, N.; Naik, P. P.; Roy, B.; Das, J.; Paul, S., Abrus Agglutinin, a type II ribosome inactivating protein inhibits Akt/PH domain to induce endoplasmic reticulum stress mediated autophagy‐dependent cell death. Molecular carcinogenesis 2017, 56 (2), 389-401.

• Ban, D. K.; Paul, S., Nano Zinc Oxide Inhibits Fibrillar Growth and Suppresses Cellular Toxicity of Lysozyme Amyloid. ACS applied materials & interfaces 2016, 8 (46), 31587-31601.

• Ban, D. K.; Paul, S., Protein corona over silver nanoparticles triggers conformational change of proteins and drop in bactericidal potential of nanoparticles: Polyethylene glycol capping as preventive strategy. Colloids and Surfaces B: Biointerfaces 2016, 146, 577-584.

• Kumar, B.; Kulanthaivel, S.; Mondal, A.; Mishra, S.; Banerjee, B.; Bhaumik, A.; Banerjee, I.; Giri, S., Mesoporous silica nanoparticle based enzyme responsive system for colon specific drug delivery through guar gum capping. Colloids and Surfaces B: Biointerfaces 2017, 150, 352-361.

Publications in Conferences• Biswas R, Sarkar A., Isolation and characterization of arsenite oxidizing strains for their potential in arsenic bioremediation.

Submitted to the upcoming conference, National Conference on Waste to Energy, Carbon Capture and Storage [NCWECCS-2017], 3-5 August 2017, National Institute of Technology Rourkela, Odisha.

• Gupta K, Maurya V, Sarkar A., Advancement of omics: New era in waste management. Submitted to the upcoming conference, National Conference on Waste to Energy, Carbon Capture and Storage [NCWECCS-2017], 3-5 August 2017, National Institute of Technology Rourkela, Odisha.

• Jena S, Sakhare G M, SPanda S K, Thirugnanam A., Determining predictability of human gait parameters using univariate and multivariate regression studies. National Conference on Biomechanics and Rehabilitation Engineering, 15-16 September, 2016, North Eastern Hill University, Shillong, pp. 44-50.

• Vyas V, Kaur T, Thirugnanam A., Chitosan composite three dimensional macropsheric scaffolds for bone tissue engineering. 11th Asia Pacific Chitin and Chitosan Symposium & 5th Indian Chitin and Chitosan Society Symposium, 28 -30 September 2016, Kochi.

• Kumari C, Kumar A, Sarangi S K, Thirugnanam A., An experimental and numerical study for cryogen spray cooling. 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, 15 -17 December 2016, MNNITA, Allahabad, U.P., India.

• Natamai P V, Chowdhury S, Chaurasia R, Kaur T, Thirugnanam A., Drug eluting chitosan and tamarind seed polysaccharide hydrogels with herbal extracts for diabetic wound healing. 9th International Conference on Materials for Advanced Technologies, 18 -23 June 2017, Suntec Singapore.


25

• Pradhan A, Nayak S K, Pande K, Ray S S, Pal K, Champaty B, Anis A, Tibarewala D., Acquisition and classification of EMG using a dual-channel EMG biopotential amplifier for controlling assistive devices. India Conference (INDICON), 2016 IEEE Annual. 2016: IEEE.

• Nayak S K, Suman S, Nayak B M, Banerjee I, Pal K, Champaty B, Mohapatra B, Tibarewala D., Effect of Cannabis consumption on ANS and conduction pathway of heart of Indian paddy field workers. India Conference (INDICON), 2016 IEEE Annual. 2016: IEEE.

• Mokashi C, Nayak S K, Pradhan A, Rout S K, Pal K, Champaty B, Anis A., Effect of sound in a horror movie clip on the physiology of the ANS and the conduction pathway of the heart. India Conference (INDICON), 2016 IEEE Annual. 2016: IEEE.

• Guttala P K, Gupta M K., Virtual screening of potential inhibitors of anti-influenza A H1N1. Symposium on Accelerating Biology-Delivering precision, 17-19 January 2017, Center for Development of Advanced Computing (CDAC), Delhi.

• Patra T P, Gupta M K., Cryopreservation of somatic cells by encapsulation-vitrification in alginate microbeads. International Conference on Reproductive Health with Emphasis on Strategies for Infertility, Assisted Reproduction and Family Planning, 23-15 January 2017, Indian Society for Study of Reproduction and Fertility (ISSRF), AIIMS, Delhi.

• Bhaskar R, Sahoo B, Gupta M K., In vitro spermatogenesis of motile sperm in Capra hircus by an organ culture method. International Conference on Reproductive Health with Emphasis on Strategies for Infertility, Assisted Reproduction and Family Planning, 23-15 January 2017, Indian Society for Study of Reproduction and Fertility (ISSRF), AIIMS, Delhi.

• Guttula P K, Gupta M K., Exploring the molecular mechanism of pluripotency in male germ-line stem cells in silico. National Seminar on Genetics and Genome Analysis for novel therapeutics, 19-21 December 2016.

• Pushp P, Simoes I N, Ferreira F, Cabral J M S, Pramanik K, Gupta M K., Isolation and Proliferation of Umbilical Cord Derived Mesenchymal Stem Cells for Tissue Engineering Application. The 9th World Congress on Preventive and Regenerative Medicine conference (WCPRM), 13-15 November 2016, KIIT University, Bhubaneswar.

• Nayak S, Nayak A, Satpathy M, Bala A, Pal K, Ray S S., Effect of different solvents on the fluroroscence property of calcium-doped vanadium oxide nanoparticles. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Bala A, Shubam S, Rozalin K, Sahoo D, Singh K A, Banerjee I, Ray S S., Extraction of cellulose nanocrystals from parthenium weed. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Nimal T R., Sahoo D, Shuvam S, Satpathy M, Tripathy S P, Ray S S., Development of Extracellular matrix-nanohydroxyapatite Porous Composite Scaffold for Cancellous Bone Tissue Engineering. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Bala A, Tripathy S P, Nayak S, Goyal P, Singh K A, Pramanik K, Ray S S., Electrospun silk nanofibres exhibit amyloid-like features. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Bala A, Singh K A, Nayak A, Nayak S, Pal K, Pramanik K, Ray S S., Nanotoxicity of Nitrogen and phosphorous-doped graphene quantum dot, from Cigarettes. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Singh K A, Bala A, Nayak S, Nayak A, Ray S S., Health hazards of triple-doped graphene quantum dot from petrol engine exhausts. Recent Advances in Nanosciences and Nanotechnology-2016 (ICRAN-2016), 19-20 December 2016, JNU Delhi.

• Tripathy S P, Parida K, Mohapatra S, Gupta N., Water hyacinth: The most invasive weed, ISSRD Engineering Students Innovation Challenge -2017, 28-29 January 2017, Bangalore.

• Singh K A, Sahoo D, Subham S, Nayak A., Graphene quantum dots: The killer in air? ISSRD- Engineering Students Innovation Challenge 2017, 28-29 January 2017, Bangalore.

• Tripathy S P, Satpathy M, Mishra P., Extraction of quantum dots from Ghee: ISSRD- Engineering Students Innovation Challenge 2017, 28-29 January 2017, Bangalore.

Paper Accepted for Publication• Yadav, J.; Balabantaray, S.; Patra, N., Statistical Optimization of Fermentation Conditions For The Improved Production of

Poly-Β-Hydroxybutyrate From Bacillus subtilis. Chemical Engineering Communications 2017, (just-accepted).

• Panda, I.; Balabantaray, S.; Sahoo, S K.; Patra, N., Mathematical Model of Growth and Poly-hydroxybutyrate Production Using Microbial Fermentation of Bacillus subtilis. Chemical Engineering Communications 2017, (just-accepted).

• Paul, S. R. Nayak, S. K.; Yogalakshmi, Y.; Singh, V. K.; Rath, A.; Banerjee, I.; Anis, A.; Pal, K., Understanding the effect of tamarind gum proportion on the properties of tamarind gum based hydroethanolic physical hydrogels. Polymer-Plastics Technology and Engineering 2017, (just-accepted).

• Pandey, P. M. Banerjee, I.; Anis, A.; Pal, K., An Insight on the Swelling, Viscoelastic, Electrical and Drug Release Properties of Gelatin-Carboxymethyl Chitosan Hydrogels. Polymer-Plastics Technology and Engineering 2016, (just-accepted).


26

Books / Book Chapter• Aggarwal, S. Ezhil Venuswaran, R. R.; Balasubramanian, P., Impact of Hydrochloric Acid on Phase Formation of Titanium

Dioxide Nanoparticles. In Materials, Energy and Environment Engineering: Select Proceedings of ICACE 2015, Mohan B, R.; Srinikethan, G.; Meikap, B. C., Eds. Springer Singapore: Singapore, 2017; pp 153-158.

• Balasubramanian, P. Karthickumar, P., Biofertilizers and Biopesticides: A Holistic Approach for Sustainable Agriculture. Sustainable Utilization of Natural Resources 2017, 255.

• Rangabhashiyam, S. Balasubramanian, P., Dye removal prospectives using diverse adsorbents for synthetic dye adsorption. LAP LAMBERT Academic Publishing GmbH & Co. KG, Germany. ISBN: 9783330063709.

• Buriuli, M.; Verma, D., Polyelectrolyte Complexes (PECs) for Biomedical Applications. In Advances in Biomaterials for Biomedical Applications, Springer: 2017; pp 45-93.

• Yadav, I.; Nayak, S. K. Pandey, P. M.; Biswal, D.; Anis, A.; Pal, K., An Insight on the Texture and Electrical Properties of Tomato Ketchup on a Temperature Scale. In Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, IGI Global: 2017; pp 399-417.

• Nayak, S. K. Srivastava, U.; Tibarewala, D.; Thakur, G.; Mohapatra, B.; Pal, K., Effect of Odia and Tamil Music on the ANS and the Conduction Pathway of Heart of Odia Volunteers. In Pattern and Data Analysis in Healthcare Settings, IGI Global: 2017; pp 240-263.

• Nayak, S. K. Nawaz, A.; Champaty, B.; Shahnawaz, M.; Tibarewala, D.; Mohapatra, B.; Pal, K., Development of an Intelligent Cradle to Monitor Bed-Wet and Hyperthermia Conditions. In Handbook of Research on Wireless Sensor Network Trends, Technologies, and Applications, IGI Global: 2017; pp 482-503.

• Kulkarni, G. D. Nayak, S. K.; Das, K. Kar, J. P.; Mohapatra, B.; Tibarewala, D.; Anis, A.; Pal, K., Designing and Evaluation of Aluminium Thin-Film Electrochemical Sensors for Biomedical Analysis. In Handbook of Research on Manufacturing Process Modeling and Optimization Strategies, IGI Global: 2017; pp 430-453.

• Ray, A.; Nayak, S. K. Champaty, B. Tibarewala, D.; Pal, K., Non-Linear Analysis of Heart Rate Variability and ECG Signal Features of Swimmers from NIT-Rourkela: A Case Study. Computational Tools and Techniques for Biomedical Signal Processing 2016, 56.

• Mohapatra, B. C. B. Pal, S. S. R. K., Voluntary Blink Controlled Communication Protocol for Bed-Ridden Patients. Handbook of Research on Wireless Sensor Network Trends, Technologies, and Applications 2016, 162.

• Patra, N. Srivastava, A. K., Mass Production of Artemisinin Using Hairy Root Cultivation of Artemisia annua in Bioreactor. Bioprocessing of Plant In Vitro Systems 2017, 1-17.

• Sar, P.; Mohapatra, B.; Ghosh, S.; Paul, D.; Sarkar, A.; Kazy, S., Geomicrobiology of Arsenic-Contaminated Groundwater of Bengal Delta Plain. In Handbook of Metal-Microbe Interactions and Bioremediation, CRC Press: 2017; pp 333-353.

• Sarkar, A. Biswas, R., Application of “Omics” tools in Soil microbiology: The state of the art. Accepted in Springer publication; 2017.

• Sarkar, A. Gupta, N.; Kamari, N. Gupta, K., Microbial interaction with metals and metalloids: a prospective clean environment. Accepted in Springer publication; 2017.

Patents• A method of rapid detection of DNA fragmentation in human sperm. Indian Patent (#201731016070; Filed on 08.05.2017).

(Inventors: Sawan Katiyar, Ashish Dutta, Mukesh Kumar Gupta).

• Ready-to-use PVA-PVP based patch for wound dressing and tissue engineering applications. (#201731016071; Filed on 08.05.2017). (Inventors: Pallavi Pushp, Samruddhi Kelkar, Neelesh Sharma, Mukesh Kumar Gupta).


By Faculty:• Prof. M.K.Gupta became Executive Member of HERITAGE Network, Ecole Centrale de Nantes, France. (Since 06.04.2017).

• Prof. M.K.Gupta became Member of External Examiner Board, University of Malaya, Malaysia. (Since April 2017).

• Prof. M.K.Gupta became the Nominee of the Committee for Prevention and Control of Experimentation on Animals (CPCSEA), Ministry of Environment, Forest and Climate Change (MoEF & CC) (Since 06.04.2017).

• Prof. M.K.Gupta became Member of Board of Studies, Amity University, Ranchi, (Since 01. 04.2017).

• Prof. M.K.Gupta was the recipient of Faculty Academic Exchange to University of Warsaw, Poland under the framework of NAMASTE, Erasmus Mundus.

• Prof. K.Pal was selected as Recruitment Committee Member of Odisha State Medical Corporation Ltd. for the recruitment of Consultant (Procurement) and Consultant (Equipments).


27

• Prof. K.Pal was Paper setter for the recruitment of Consultant (Procurement) and Consultant (Equipments) for Odisha State Medical Corporation Ltd.

• Prof. N.Patra received Early Career Research Award of Rs. 14 Lacs for 3 years (2017-2020) by SERB, DST, GoI.

• Prof. S.S.Ray received Best Supervisor award at national level at ISSRD, Engineering Students Innovation Challenge -2017.

• Prof. P. Balasubramanian received Young Scientists of the Year (2016) award from National Environmental Science Academy (NESA), New Delhi, India on 20th Nov 2016.

• Prof. P. Balasubramanian received Best paper award in International Conference on Environmental Engineering and Applications - 2016, on 25-27th Jul’ 2016 by Asia Pacific Chemical, Biological and Environmental Engineering society held at Kuala Lumpur, Malaysia.

• Prof. I. Banerjeee Awarded ‘Certificate of Outstanding Contribution in Reviewing’ by Carbohydrate Polymer , an Elsevier Journal of Impact Factor 4.81.

By Students:• Best paper award to Mr. Suraj K. Nayak in INDICON-2016 for the paper titled: Effect of cannabis consumption on the heart

and the ANS of Indian paddy-field workers.

• Best national project award under “Biotechnology” category”;at ISSRD, Engineering Students Innovation Challenge -2017.

• Best national Project under “Social innovation” category”;at ISSRD, Engineering Students Innovation Challenge -2017.

• Best Poster award under “Biotechnology” category at ISSRD, Engineering Students Innovation Challenge -2017.

• The 2nd Best project award at ICRAN-2016, JNU, Delhi.

• Five students were selected for BIRAC-SRISTI GYTI Appreciation Awards for Rs 1, 00,000 each.

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Prof. A. Sarkar delivered an invited lecture on Molecular tools required for the screening of organism and molecular

characterization in the TEQIP-II sponsored STTPon Bioprocess Development, Reactor, Design and Analysis, at NIT Raipur on 12.01.2017.

• Prof. N. Patra delivered an invited lecture on Bioreactors for Plant Cell Culture in One week short term training program on “Bioprocess Development, Reactor Design and Analysis” at NIT Raipur on 12.07.2017.

• Prof. S.S. Ray attended Workshop and training on Indian Patent, Trademark and Design; Nagpur, Sept 19-30, 2016.

• Prof. I. Banerjee delivered an invited lecture on Proangiogenic Nano-Biomaterials for Bone Tissue Engineering at MG University Kottayam, Kerala, India on 13th August, 2016.

RESEARCH PROJECTSName of the Project Sponsoring

AgencyName of the PI /

Co-PITotal Value

(Rs. in Lakhs)Start Date Close Date

Molecular characterization of arsenic (As) transformation mechanisms of arsenite oxidizing bacteria isolated from contaminated groundwater of Bihar to elucidate their potential application in As-bioremediation”

DST, SERB Dr. Angana Sarkar 1500000 28-03-2015 ongoing

Exploitation of arsenite oxidizing bacteria in development of pH dependent bio-sensor for rapid arsenic detection

DST, WTIDr. Angana Sarkar and Dr. SougataKar

4900000 21-06-2017 ongoing

Construction of pH based arsenic bio-sensor using engineered arsenite oxidizing strain

TEQIP Phase II Dr. Angana Sarkar 250000 09-09-2016 ongoing


28

Name of the Project Sponsoring Agency

Name of the PI / Co-PI

Total Value (Rs. in Lakhs)

Start Date Close Date

Development of ultra fine grained titanium for medical implants

DST SERBDr. A. Thirugnanam

25.8 Aug 2013 Oct 2016

Testicular stem cell-mediated transgenesis for production of granulocyte colony stimulating factor (G-CSF).

DBT Mukesh Kumar Gupta

63.84 2015 2018

In vitro spermatogenesis as a method to bypass pre- and post-meiotic barriers to spermatogenic process and restoration of fertility

ICMRMukesh Kumar Gupta

33.79 2015 2018

Analysis of spermatozoal RNA and its functional relevance to fertility.

CSIRMukesh Kumar Gupta

11.50 2015 2018

Fermentation-assisted technologies for the enrichment and recovery of novel bioactive compounds from food industry wastes of contaminated coastal Odisha

SERB, DST, GoI Nivedita Patra 14.02Approved on

28th May 20172020

Stability, mutagenesis and functional studies on Fibroblast Growth Factor Homologous Factors

DBT Dr. Nandini Sarkar

28.08 2013 2016

Preparation of stable self-assembled hybrid nano-structure of bovine α-lactalbumin and egg white lysozyme for the evaluation of anti-proliferative activity in multiple cancer cells: Study of simultaneous targeting, therapy and anticancer drug delivery application

Science and Engineering Research Board (SERB), DST

Prof. S.Paul 47 Sep 2016 Sep 2019

Protective autophagy by secretory clusterin associated with cell survival and chemoresistance in oral cancer

Board of Research in Nuclear Sciences (BRNS), Department of Atomic Energy (DAE)

Prof. S. Bhutia (LS) and Prof. S Paul (BM)

33.4 Mar 2017 Mar 2020

CONSULTANCY SERVICESSponsors Address Title of the Project Faculty Name

Cytometry solutions Pvt. Ltd. Understanding the cell physiology under the influence of physical and chemical stimuli

Prof. I.Banerjee


29

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCEName of the Project Sponsoring

AgencyName of the Coordinator



Bioinformatics infrastructure facility DBT Mukesh Kumar Gupta Rs. 31.64 Lakhs 2013 2018

LIST OF LABORATORIES DEVELOPED Sl. No. Name of the Laboratories

1 Biomimetics Laboratory2 Gene Manipulation Laboratory3 Protein Engineering Laboratory4 Smart Materials laboratory

PH.D. DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis Supervisor

Shitarashmi Sahu Conversion of Cotton Gin Waste To Bioethanol: Pretreatment, Hydrolysis and Fermentation

Prof. Krishna Pramanik

Bhisham Narayan Singh Development of Novel Silk Fibroin/Carboxymethyl Cellulose based Nanofibrous Scaffolds for Bone Tissue Engineering Application


Sirsendu Sekhar Ray Cryopreservation Strategy for Adipose Tissue and Adipose Tissue Derived Stem Cells by Developing Non-Toxic Freezing Solutions


Biswadeep Chaudhuri Development of Novel scaffolds for Skeletal Muscle Tissue Engineering Applications


Varshini Vishwanath Development of Silk-Fibroin/Chitosan based Porous Scaffolds for Cartilage Tissue Engineering


Bibhukalyan Prasad Nayak Analysis and quantification of physical fatigue in automobile drivers: A biomedical approach

Prof. Mukesh K. Gupta

Deependra Kumar Ban Interaction of Metal-Based Nanoparticles with Proteins: Relation to Structure, Function and Amyloid Forming Propensity of Lysozyme and α-Lactalbumin

Prof. Subhankar Paul

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis SupervisorGauri Shankar Shaw Preparation and Characterization Of Gelatin-Tamarind Gum / Carboxymethyl

Tamarind Gum Based Phase Separated Hydrogels And Films For Tissue Engineering Applications

Prof. Kunal Pal and Prof. Krishna Pramanik


30

Department of CIVIL ENGINEERING


53 | P a g e





43

77

19

5

0

10

20

30

40

50

60

70

80

90

B.Tech. M.Tech. ( 2 Years) M.Tech. Dual( 5 Years) Ph.D.

69

138

95

0

20

40

60

80

100

120

140

160

B.Tech M.Tech ( 2 Years) M.Tech Dual (5 Years)


53 | P a g e





43

77

19

5

0

10

20

30

40

50

60

70

80

90

B.Tech. M.Tech. ( 2 Years) M.Tech. Dual( 5 Years) Ph.D.

69

138

95

0

20

40

60

80

100

120

140

160

B.Tech M.Tech ( 2 Years) M.Tech Dual (5 Years)


54 | P a g e

FACULTY:

SL Name & Specialization1 Prof.(Mrs.) Asha Patel ([email protected])

Associate professor,M.Sc (Engg.)(Sambalpur)Structural Engineering

2 Prof. Awadhesh Kumar, Water Resource Engineering ([email protected])Associate Professor,Ph.D.(NIT Rourkela)Water Resources Engineering

3 Prof. Nagendra Roy, Geotechnical Engineering ([email protected])Professor,Ph.D. (IIT Delhi)Geotechnical Engineering

4 Prof.(Mrs.) Kaoli Karar(Paul) ([email protected])Assistant Professor,Ph.D. (IIT ,Kharagpur)Environmental Engineering

5 Prof. Kanhu C. Patra, Water Resources Engineering ([email protected])Professor,Ph.D.(IIT Kharagpur)Water Resources Engineering

6 Prof. Kishanjit K. Khatua, ([email protected])Associate Professor,Ph.D.(NIT Rourkela)Water Resources Engineering

7 Prof. Kishore C. Biswal, Structural Engineering ([email protected])Associate Professor,Ph.D .(IIT Kharagpur)Structural Engineering

8 Prof. Mahabir Panda, Transportation Engineering ([email protected])Professor,Ph.D. (IIT Kharagpur)Transportation Engineering

9 Prof. Mahendra Gattu, ([email protected])Assistant Professor , Ph.D. (Northwestern university)Structural Engineering

10 Prof. Manoranjan Barik, Structural Engineering ([email protected],in)Associate Professor,Ph.D.(IIT ,Kharagpur)Structural Engineering

11 Prof. Nagendra Roy, Geotechnical Engineering ([email protected])Professor, Ph.D. (IIT Delhi)

43 3

1 1 1 1 1

3

1

14

23

1 1 1

0

2

4

6

8

10

12

14

16

3SC Solutions Deloitte Infosys (CoreDivision)

KECInternational

TCS ZS Associates


31

FACULTY: SL Name & Specialization1 Prof.(Mrs.) Asha Patel ([email protected])

Associate professor,M.Sc (Engg.)(Sambalpur)Structural Engineering

2 Prof. Awadhesh Kumar, Water Resource Engineering ([email protected])Associate Professor,Ph.D.(NIT Rourkela)Water Resources Engineering

3 Prof. Nagendra Roy, Geotechnical Engineering ([email protected])Professor,Ph.D. (IIT Delhi)Geotechnical Engineering

4 Prof.(Mrs.) Kaoli Karar(Paul) ([email protected])Assistant Professor,Ph.D. (IIT ,Kharagpur)Environmental Engineering

5 Prof. Kanhu C. Patra, Water Resources Engineering ([email protected])Professor,Ph.D.(IIT Kharagpur)Water Resources Engineering

6 Prof. Kishanjit K. Khatua, ([email protected])Associate Professor,Ph.D.(NIT Rourkela)Water Resources Engineering

7 Prof. Kishore C. Biswal, Structural Engineering ([email protected])Associate Professor,Ph.D .(IIT Kharagpur)Structural Engineering

8 Prof. Mahabir Panda, Transportation Engineering ([email protected])Professor,Ph.D. (IIT Kharagpur)Transportation Engineering

9 Prof. Mahendra Gattu, ([email protected])Assistant Professor , Ph.D. (Northwestern university)Structural Engineering

10 Prof. Manoranjan Barik, Structural Engineering ([email protected],in)Associate Professor,Ph.D.(IIT ,Kharagpur)Structural Engineering

11 Prof. Nagendra Roy, Geotechnical Engineering ([email protected])Professor, Ph.D. (IIT Delhi)Geotechnical Engineering

12 Prof. Pradip Sarkar, Structural Engineering([email protected])Associate Professor,Ph.D. (IIT,Madras)Structural Engineering

13 Prof. Prashant K. Bhuyan, Transportation Engineering([email protected])Assistant Professor,Ph.D.(IIT, Bombay)Transportation Engineering

14 Prof. Rabi Narayan Behera ([email protected])Assistant Professor , Ph.D. (NIT Rourkela)Geotechnical Engineering

15 Prof. Robin Davis, Structural Engineering ([email protected])Assistant Professor,Ph.D. (IIT,Madras)Structural Engineering

16 Prof. Sanat Nalini Sahoo ([email protected])Assistant professor, Ph.D.Water Resources Engineering

17 Prof. Sarat K. Das, Geotechnical Engineering ([email protected])Associate Professor,Ph.D. (IIT, Kanpur)Geotechnical Engineering

18 Prof. Shishir Kumar Sahu , Structural Engineering ([email protected])Professor & H.O.D ,Ph.D. (IIT ,Kharagpur)Structural Engineering


32

SL Name & Specialization19 Prof. Somesh Jena, Environmental Engineering ([email protected])

Assistant Professor,M.Tech. (ISM Dhanabad)Environmental Engineering

20 Prof. Suresh P. Singh, Geotechnical Engineering ([email protected])Professor,Ph.D.(Anna University)Geotechnical Engineering

21 Prof. Ujjal Chattaraj, Transportation Engineering ([email protected])Assistant Professor,Ph.D.(IIT,Kanpur)Transportation Engineering

22 Prof. U. K. Mishra, Structural Engineering ([email protected])Assistant Professor,M.Tech.(Sambalpur)Structural Engineering

PUBLICATION:

Publications in Journals• M. Panda, M. M. Padhi and J. P. Giri, “Use of emulsion for warm mix asphalt”, International Journal of Transportation Science

and Technology, vol. 6, no. 1, pp. 78-85, 2017, DOI: 10.1016/j.ijtst.2017.04.001

• A. K. Das and M. Panda, “Investigation on rheological performance of Sulphur Modified Bitumen (SMB) binders”, Construction and Building Materials, vol. 149, pp. 724–732, 2017, DOI: 10.1016/j.conbuildmat.2017.05.198

• I. Panda, S. Jain, S. K. Das and R. Jayabalan “Characterization of red mud as a structural fill and embankment material using bioremediation”, International Biodeterioration & Biodegradation, vol 119, pp. 368-376, 2017

• S. Bhattacharya, Pavani and S. K. Das “Prediction of uplift capacity of suction caisson in clay using functional network and multivariate adaptive regression spline”, Scientia Iranica, In press, 2017

• S. Suman, R. Mohanty and S. K. Das “Modelling the pullout capacity of ground anchors using multi-objective feature selection”, Arabian Journal for Science and Engineering, vol 42, no. 3, pp. 1231-1241, 2017, DOI: 10.1007/s13369-016-2361-6

• Shakti Suman, S. Z. Khan, S. K. Das, S.K. Chand “Slope stability analysis using artificial intelligence techniques”, Natural Hazards, vol. 84, no. 20, pp. 727-748, 2016, DOI: 10.1007/s11069-016-2454-2

• S. N. Sahoo, and P. Sreeja, “Sensitivity of Imperviousness Determination Methodology on Runoff Prediction.” ISH Journal of Hydraulic Engineering, Taylor and Francis Publications, 2017, DOI: 10.1080/09715010.2017.1301832

• S. P. Singh, S. Rout and A. Tiwari “Quantification of desiccation cracks using image analysis technique”, International Journal of Geotechnical Engineering, 2017, DOI: 10.1080/ 19386362.2017.1282400

• M. Murmu and S. P. Singh “Effects of Curing Temperature on Strength of Lime Activated Slag Cement”, International Journal of Civil Engineering, vol 15, no. 4, pp. 575-584. 2017, DOI: 10.1007/s40999-017-0166-y

• S. Kant, J. Panda, R. Gautam, P. K .Wang and S. P. Singh “Significance of aerosols influencing weather and climate over Indian region”, International Journal of Earth and Atmospheric Science, vol. 04, no. 01, pp. 01-20, 2017.

• S. P. Singh, N. Roy, and S. Sangita “Strength and hydraulic conductivity of sedimented ash deposits treated with lime column”, International Journal of Geotechnical Engineering, 2016, DOI: 10.1080/19386362.2016.1208415

• S. P. Singh and S. Sangita, (2016) Mitigation of leaching of major and trace elements from pond ash deposits by lime column treatment. International Journal of Geotechnical and Geological Engineering, vol. 34, no. 6, pp. 2019–2031, 2016, DOI: 10.1007/s10706-016-0080-0

• S. Purohit and U. Chattaraj “An Approach to Simulate the Speed of Non-Motorized Vehicles With Respect to Various Parameters”, IOSR Journal of Engineering (IOSRJEN), vol. 07, no. 01, pp. 29-38, 2017.

• K. K. Sahoo; P. Sarkar and R. Davis “Mechanical properties of silica fume concrete designed as per construction practice” Construction Materials, Proceedings of the Institution of Civil Engineers, 2017, DOI: 10.1680/jcoma.16.00085

• A. Bhosale, R. Davis and P. Sarkar “Vertical irregularity of building: regularity index versus seismic risk” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, 2017, DOI: 10.1061/AJRUA6.0000900

• K. K. Sahoo; A. K. Sathyan; P. Sarkar and R. Davis “Improvement of the mechanical properties of mortar and concrete using ureolytic bacteria” Construction Materials, Proceedings of the Institution of Civil Engineers, 2017, DOI: 10.1680/jcoma.16.00022

• C. Kumari; B. Das, R. Jayabalan, R. Davis and P. Sarkar “Effect of non-ureolytic bacteria on engineering properties of cement mortar” ASCE Journal of Materials in Civil Engineering, 2017, DOI: 10.1061/(ASCE)MT.1943-5533.0001828


33

• A. Mistri, R. Davis and P. Sarkar “Condition assessment of fire affected reinforced concrete shear wall building – A case study” Advances in Concrete Construction, Techno Press, 2016, DOI: 10.12989/acc.2016.4.2.000

• B. Balakrishnan and P. Sarkar “Efficacy of code provisions for seismic design of asymmetric RC building” Journal of The Institution of Engineers (India): Series A, Springer, vol. 97, no. 2, pp. 111-120, 2016, DOI: 10.1007/s40030-016-0156-0

• P. Sarkar; A. Meher Prasad and D. Menon “Seismic evaluation of RC stepped building frames using improved pushover analysis” Earthquakes and Structures, Techno Press, vol. 10, no. 4, pp. 913-938, 2016, DOI: 10.12989/eas.2016.10.4.913

• K. K. Sahoo; A. K. Sathyan; C. Kumari; P. Sarkar and R. Davis “Investigation of cement mortar incorporating Bacillus sphaericus” International Journal of Smart and Nano Materials, Taylor and Francis, vol. 7, no. 2, pp. 91-105, 2016, DOI: 10.1080/19475411.2016.1205157

• K. K. Sahoo; P. Sarkar and R. Davis “Behaviour of recycled coarse aggregate concrete: age and successive recycling” Journal of The Institution of Engineers (India): Series A, Springer, vol. 97, no. 2, pp. 147-154, 2016, DOI: 10.1007/s40030-016-0154-2

• K. K. Sahoo; M. Arakha, P. Sarkar; R. Davis and S. Jha “Enhancement of properties of recycled coarse aggregate concrete using bacteria”, International Journal of Smart and Nano Materials, Taylor and Francis, vol. 7, no. 1, pp. 22-38, 2016, DOI: 10.1080/19475411.2016.1152322

• D. C. Haran Pragalath, A. Bhosale, R. Davis and P. Sarkar “Multiplication Factor for Open Ground Storey Buildings – A Reliability Based Evaluation”, Earthquake Engineering and Engineering Vibration, Springer, vol. 15, no. 2, pp. 283-295, 2016, DOI: 10.1007/s11803-016-0322-4.

• A. Mistri and P. Sarkar “Capacity Design of Reinforced Concrete Framed Building for Earthquake Loading” Indian Journal of Science and Technology, vol. 9, no. 30, pp. 1-8, 2016, DOI: 10.17485/ijst/2016/v9i30/99225

• M. Venugopal, A. Patel and V. Rajesh “A detailed study on rectangular RC beam with circular opening under torsional load”, i-manager’s Journal of Civil Engineering, vol. 7, no. 2, Dec. 2016 – Feb. 2017

• M. Venugopal, A. Patel and V. Rajesh “An experimental study on RC beam with rectangular openings: torsional load”, i-manager’s Journal of Civil Engineering, vol. 7, no. 2, Mar – May. 2017

• S. Barik and K. K. Paul “Extraction of lipid and identification of reuse techniques for kitchen food waste”, Journal of Environmental Chemical Engineering, Elsevier, vol. 5, no. 1, pp. 196-204, 2016.

• S. Barik and K. K. Paul “Utilization of kitchen food waste for physico-chemical characterization”, Journal of Civil Engineering and Environmental Technology, vol. 3, no. 1, pp. 10-12, 2016

• M. Biswal, S. K. Sahu, A. V. Asha and N. Nanda “Hygrothermal effects buckling of composite shell-experimental and FEM results”, Steel and Composite Structures, vol. 22, no. 6, pp. 1445-1463, 2016.

• S. Day, T. Mukhopadhyay, S. K. Sahu and S. Adhikari “Effects of cutout on stochastic natural frequency of composite curved panels”, Composites Part B: Engineering, vol. 105, pp. 188-202, 2016.

• M. Biswal, S. K. Sahu and A. V. Asha “Vibration of composite cylindrical shallow shells subjected to hygrothermal loading-experimental and numerical results”, Composites Part B: Engineering, vol. 98, pp. 108-119, 2016

• M. Biswal, S. K. Sahu and A. V. Asha “Dynamic stability of woven fiber laminated composite shallow shells in hygrothermal environment”, International Journal of Structural Stability and Dynamics, vol. 17, no. 8 , 1750084, 2016, DOI: 10.1142/S0219455417500845.

• H. S. Panda, S. K. Sahu and P. K. Parhi “Thermal effects on Parametric instability of delaminated woven fabric composite curved panels”, International Journal of Structural Stability and Dynamics, 2016, DOI: 10.1142/S0219455417500080.

• D. Jena and K. C. Biswal “A numerical study of violent sloshing problems with modified MPS method”, International Journal of Hydrodynamics, vol. 29, no. 4, pp. 659-667, 2017.

• J. B. Swain and K. C. Patra “Streamflow estimation in ungauged catchments using regional flow duration curve: A comparative study”, Journal of Hydrologic Engineering, ASCE, 2016 DOI: 10.1061/ (ASCE) HE.1943-5584.0001509.

• J. B. Swain, M. M. Sahoo and K. C. Patra “Homogeneous region determination using linear and nonlinear techniques”, Physical Geography, Taylor and Francis, vol. 37, no. 5, pp. 361-384, 2016.

• B. Kumar, K. C. Patra and V. Lakshmi “Daily Rainfall Statistics of TRMM and CMORPH: A Case for Trans-boundary Gandak River Basin”, . Springer, vol. 125, no. 5, pp. 919–934, 2016.

• B. Kumar, K. C. Patra and V. Lakshmi “Error in Digital Network and Basin Area Delineation Using D 8 Method- A Case Study in a sub basin of the Ganga”, Journal of Geological Society of India, Springer, vol. 89, no. 1, pp. 65-70, 2016.

• M. M. Sahoo, K. C. Patra and J. B. Swain “Application of Baye’s Bayes Rule and Entropy Weight Method for Water Quality Evaluation”, European Journal of Environmental and Civil Engineering, Taylor and Francis, vol. 21, pp. 1-23, 2016.


34

• B. Kumar, B. K. Chandola, D. Mohan and K. C. Patra “A way to identify groundwater potential zones (GWPZs) in rocky terrains (India)”, Ecology Environment and Conservation, vol. 22, no. 3, pp. 1237-1244, 2016.

• S. Panda and M. Barik “Large amplitude free flexural vibration of arbitrary thin plates using superparametric element”. International Journal of Dynamics and Control, Springer, 2017, DOI: 10.1007/s40435-016-0275-5

• S. Panda and M. Barik “Large Amplitude Free Flexural Vibration of Stiffened Plates Using Superparametric Element”, Journal of Computational and Nonlinear Dynamics, ASME, vol. 12, no. 3, 2017, DOI: 10.1115/1.4034679.

• S. Panda and M. Barik “Large Deflection of Arbitrary Thin Plates using Superparametric Finite Element”, Asian Journal of Civil Engineering (BHRC), vol. 18, no. 2, pp. 207-234, 2017.

• S. Panda and M. Barik “Finite Element Dynamic Analysis of Thin Plates with Complicated Geometry”, International Journal of Mechanical and Production Engineering, vol. 4, no. 3, pp. 19–22, 2016.

• K. Devi and K. K. Khatua “Flow Distribution in an Unsymmetrical Compound Channel”, ISH Journal of Hydraulic Engineering, Taylor & Francis, 2017: DOI: 10.1080/09715010.2017.1340096

• K. Devi, K. K. Khatua, B. S. Das and J. R. Khuntia “Evaluation of interacting length in prediction of over bank flow”, ISH Journal of Hydraulic Engineering, Taylor & Francis, vol. 23, no. 2, pp. 187-194, 2017, DOI: 10.1080/09715010.2016.1275828

• B. Naik, K. K. Khatua, N. Wright and A. Sleigh “Stage Discharge Prediction for Converging Compound Channels with Narrow Floodplains”, Journal of Irrigation and Drainage Engineering, vol. 143, no. 8, 2017, DOI: 10.1061/(ASCE)IR.1943-4774.0001184

• K. Devi, K. K. Khatua and J. R. Khuntia “Boundary Shear Stress Distribution for a Two-Stage Asymmetric Compound Channel”, Arabian Journal for Science and Engineering, Springer, vol. 42, no. 3, pp. 1077–1091, 2017.

• K. Devi and K. K. Khatua “Depth averaged velocity and boundary shear stress prediction in asymmetric compound channels”, Arabian Journal for Science and Engineering, Springer, 2017, DOI: 10.1007/s13369-017-2486-2.

• B. S. Das, K. K. Khatua and K. Devi “Numerical solution of depth-averaged velocity and boundary shear stress distribution in converging compound channels”, Arabian Journal for Science and Engineering, Springer, vol. 42, no. 3, pp. 1305-1319, 2017, DOI: 10.1007/s13369-016-2382-1

• S. Dash and K. K. Khatua “Sinuosity Dependency on Stage-Discharge in Meandering Channels”, Journal of Irrigation and Drainage, ASCE, vol. 142, no. 9, 2016, DOI: 10.1061/(ASCE)IR.1943-4774.0001037

• K. Devi and K. K. Khatua “Prediction of depth averaged velocity and boundary shear distribution of a compound channel based on the mixing layer theory”, Flow Measurement and Instrumentation, Elsevier, vol. 50, pp. 147-57, 2016, DOI: 10.1016/j.flowmeasinst.2016.06.020

• B. Naik and K. K. Khatua “Boundary shear stress distribution along the converging floodplain of a non-prismatic compound channel flow”, ISH Journal of Hydraulic Engineering, Taylor & Francis, vol. 22, no. 2, pp. 212-219, 2016, DOI: 10.1080/09715010.2016.1165633

• B. Naik and K. K. Khatua “Water surface profile computation for compound channels with narrow flood plains”, Arabian Journal for Science and Engineering, Springer, vol. 42, no. 3, pp. 941–955, 2017, DOI: 10.1007/s13369-016-2236-x

• K. Devi, K K. Khatua and J. R. Khuntia “Discharge assessment in an asymmetric compound channel by zero shear interface method”, ISH Journal of Hydraulic Engineering, Taylor & Francis, vol. 23, no. 2, pp. 126-134, 2017, DOI: 10.1080/09715010.2016.1250231

• K. Devi, K. K. Khatua, and B. S. Das “A numerical solution for depth-averaged velocity distribution in an open channel flow”, ISH Journal of Hydraulic Engineering, Taylor and Francis, vol. 22, no. 3, pp. 262-271, 2016, DOI: 10.1080/09715010.2016.1184104

• M. M. Sahoo, K. C. Patra, J. B. Swain and K. K. Khatua “Application of Baye’s Bayes Rule and Entropy Weight Method for Water Quality Evaluation”, European Journal of Environmental and Civil Engineering, Taylor and Francis, vol. 21, no. 6, pp. 730-752, 2017, DOI: 10.1080/19648189.2016.1150895

• R. Sahu, C. R. Patra, B. M. Das and N. Sivakugan “Bearing capacity of shallow strip foundation on geogrid-reinforced sand subjected to inclined load”. International Journal of Geotechnical Engineering, Taylor & Francis, vol. 10, no. 2, pp. 183-189, 2016

• R. Sahu, C. R. Patra, B. M. Das and N. Sivakugan “Ultimate bearing capacity of rectangular foundation on geogrid-reinforced sand under eccentric load”. International Journal of Geotechnical Engineering, Taylor & Francis, vol. 10, no. 1, pp. 52-56, 2016.


35

Publications in Conferences• M. Panda, J. Ojha and S. Purohit, “Development and evaluation of Sulphur Modified Bitumen binder”, Eighth International

Conference on Maintenance and Rehabilitation of Pavements (MAIREPAV-8), Singapore, 27-29 July 2016, pp. 774-783.

• R. N. Behera, C.R. Patra “Ultimate Bearing Capacity of Strip Footing under Eccentrically Inclined Load” Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• R. N. Behera, A. Kumar, S. K. Sasmal, C. R. Patra “Geotechnical and Geoenviornmental Characterization of TTPS Pond Ash and its Utilization” Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• A. Vamsi, R. N. Behera, C. R. Patra “Development of Alternate Liner Material by Blending Fly Ash, Local Soil and Bentonite” Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• K. Swain, M. Mahamaya, S. Alam, S. K. Das “Stabilization of dispersive soil using biopolymer”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• P. S. Parhi, L. Garanayak, M. Mahamaya, S. K. Das “Stabilization of an expansive soil using alkali activated fly ash based geopolymer”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• H. S. J. Dash and S. K. Das “Characterization of dredged sand from Chilka lake as a geomaterials with and without biopolymer”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• H. S.J. Dash and S. K. Das “Utilization of dredged Chilka sand as a construction material” International Conference on Recent Advances in Mechanics & Materials (ICRAMM- 2016), December 17–18, 2016, Burla, Odisha

• S. Rout and S. P. Singh “An Experimental Investigation on the Geoengineering Properties of Pond Ash-Bentonite Mixes”, Indian Geotechnical Conference (IGC 2016), December 15-17, 2016, IIT Madras, Chennai, India.

• S. Samantasinghar and S. P. Singh “Synthesis of Fly Ash-GGBS Blended Geopolymer Composits”, Indian Geotechnical Conference (IGC 2016), December 15-17, 2016, IIT Madras, Chennai, India.

• S. P. Singh, S Samantasinghar and D. Sindhuja “Influence of GGBS on Strength of Red Mud Stabilized by Alkalination Process”, Indian Geotechnical Conference (IGC 2016), December 15-17, 2016, IIT Madras, Chennai, India.

• A. Pani and S. P. Singh “Geo-engineering properties of sedimented flyash bed stabilized by chemical columns”, Indian Geotechnical Conference (IGC 2016), December 15-17, 2016, IIT Madras, Chennai, India.

• S. Rout and S. P. Singh “Assessing the suitability of compacted bentonite-pond ash mixes as a landfill liner”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• S. P. Singh, S. Samantasinghar and D. Sindhuja “Stabilization of red mud using ground granulated blast furnace slag by geopolymerization technique”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• A. Pani and S. P. Singh “Effect of temperature on strength and microstructure of lime stabilized fly ash”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• A. Pani and S. P. Singh “Influences of curing conditions on strength and microstructure of lime- amended fly ash”. 10th International conference on the bearing capacity of roads, railways and airfields, June 28-30, 2017, Athens, Greece

• S. Mohanty, N. Roy and S. P. Singh “Strength Characteristics of Dispersive Soil by Using Industrial By-Products”, GeoMEast 2017 International Congress and Exhibition on Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, Egypt

• S. Sahoo, S. P. Singh and R. Das “Effects of Delay Time on Plasticity and Compaction Characteristics of Lime Modified Expansive Soil”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• S. P. Singh, A. Mohanbabu and H. Namdeo “Stabilization of Thick Flyash Slurry Using Alkali Activation”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• S. Samantasinghar, S. P. Singh and S. Palsule “Synthesis and Characterization of Geo-polymer Grout Material”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• A. Pani and S.P. Singh “Stabilization of Sedimented Fly ash Deposits Using Chemical Columns”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• S. P. Singh, P. Nanda and I. Sengupta “Effect of Slenderness Ratio on the Behaviour of Encased Stone Column”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India


36

• S. Rout and S.P. Singh “Effects of Molding Moisture Content on Strength and Hydraulic Properties of Pond ash-Bentonite Mixes”, Indian Geotechnical Conference (GeoNEst-2017), 14-16 December 2017, IIT Guwahati, India

• N. S. Rahmatyar and U Chattaraj “Optimization of the Public Transport Network for a Multiple-Core City: Case Study of Kabul” IRF International Conference, March 13, 2016, Kolkata, India.

• U. Chattaraj, A. Das and M. Biswal “Studies on pedestrian fundamental diagram considering impacts of gender mix”, 12th Transportation Planning and Implementation Methodologies for Developing Countries (TPMDC 2016), December 19-21, 2016, Mumbai, India.

• U. Chattaraj, M. Biswal and Jyoti Das “Studies on Three Dimensional Pedestrian Motion on Railway Foot over Bridge”, 12th Transportation Planning and Implementation Methodologies for Developing Countries (TPMDC 2016), December 19-21, 2016, Mumbai, India.

• N. C. Kavuri, K. K. Paul and N. Roy “Chemical characterization of PM10 aerosol in urban region of Indian steel city, Rourkela”, International Conference on Aerosol Climate Change Connection, May 25-27, 2017, Darjeeling, India.

• N. C. Kavuri, K. K. Paul, N. Roy, P. Paul and A Kumar “Enrichment analysis of aerosol in urban region of Indian steel city, Rourkela”, International Conference on Aerosol Climate Change Connection, May 25-27, 2017, Darjeeling, India.

• K. C. Patra and Sachin “Evaluation of Empirical Equations for Dam Breach Parameters and its Application in Indian Dam Failure Cases”, 37th IAHR World Congress, August 13-18, 2017, Kuala Lumpur, Malasiya,.

• S. Mishra and K. C. Patra “Indexing of Water Quality for River Flows”, 7th International Conference on Sustainable Built Environment (ICSBE 2016), December 16-18, 2016 Kandy, Sri Lanka.

• B. Kumar, V. Laxmi and K. C. Patra “Assessing Hydrological Uncertainty Using the SWAT Model to Simulate Streamflow Over the Alpine Himalayas”, Poster ID: H43A-1392, American Geological Union (AGU), December 12-16, 2016, San Francisco, United States.

• S. Panda and M. Barik “Finite Element Buckling Analysis of Thin Plates with Complicated Geometry”, The sixth international conference on structural engineering, mechanics and computation, September 05-07, 2016, pp. 867–871, Cape Town, South Africa.

• B. P. Mishra and M. Barik “NURBS Augmented Finite Element Method (NAFEM) for Bending of Thin Arbitrary Plates”, The sixth international conference on structural engineering, mechanics and computation, September 05-07, 2016, pp. 516–521, Cape Town, South Africa.

• S. Panda and M. Barik “Nonlinear Transient Vibration Analysis of Arbitrary Thin Plates Using Superparametric Element”, International Congress and Exhibition, Sustainable Civil Infrastructures: Innovative Infrastructure Geotechnology, July 15-19, 2017, pp. 366–372, Cham, Egypt.

• K. Devi, K. K. Khatua, N. Wright and A. Sleigh “Two Dimensional solution for estimation of depth averaged velocity in two stage open channel” 7th International Conference on Flood Management (ICFM7), September 05-07, 2017, University of Leeds, U. K.

• K. Devi, K. K. Khatua, B. S. Das and J. R. Khuntia “Prediction of calibrating coefficients for rough compound channel flow”, 7th International Conference on Flood Management (ICFM7), September 05-07, 2017, University of Leeds, U. K.

• J. R. Khuntia, K. K. Khatua and K. Devi “Application of multilinear regression analysis for zonal flow distribution of a two stage open channel” 7th International Conference on Flood Management (ICFM7), September 05-07, 2017, University of Leeds, U. K.

• B. S. Das, K. K. Khatua, N. Wright and K. Devi “Application of the Independent Subsection Method to Compound Channel having Non-Prismatic Floodplains” 7th International Conference on Flood Management (ICFM7), September 05-07, 2017, University of Leeds, U. K.

• B. S. Das, K. K. Khatua, K. Devi and J. R. Khuntia “Experimental Investigation on a Compound Channel having Diverging Floodplains”, 7th International Conference on Flood Management (ICFM7), September 05-07, 2017, University of Leeds, U. K.

• A. Pradhan, K K Khatua & S.S. Dash. “Apparent shear stress analysis in meandering compound channels” River Flow 2016, St. Louis, Iowa City, USA, July 11-14, 2016, ISBN-978-1-138-02913-2, pp 472-479.

• B. S. Das, K K Khatua and K. Devi. “Prediction of energy loss in compound channel having enlarging floodplain”, River Flow 2016, July 11-14, 2016, pp. 65-72, St. Louis, Iowa City, USA.

• K. Devi, K. K. Khatua and J. R. Khuntia “Prediction of mixing layer in symmetric and asymmetric compound channels”, River Flow 2016, July 11-14, 2016, pp. 39-47, St. Louis, Iowa City, USA.

• K. Devi, Khatua, K. K. and B. S. Das “Apparent shear in an asymmetric compound channel”, River Flow 2016, July 11-14, 2016, pp. 48-56, St. Louis, Iowa City, USA.


37

• K. Devi, Khatua K..K and B. S. Das “Apparent Shear Stress in an Unsymmetrical Compound Channel Flow” International Conference on Hydraulics, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• Devi K., K..K. Khatua and J. R. Khuntia “Application of Shiono and Knight Method in Smooth and Rough Asymmetric Compound Channel Flow”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• J. R. Khuntia, K. Devi and K. K. Khatua “Calibrating Coefficients for Prediction of Depth Averaged Velocity Distribution”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• J. R. Khuntia,K. K. Khatua and S. Jena “Secondary Flow Effect in Discharge Prediction for Smooth and Rough Open Channel Flow”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• B. S. Das and K. K .Khatua “Critical Appriasal of Various Approaches to Predict Flow in Compound Channel Having Converging and Diverging Floodplains”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• P. Singh, A. Kumar and K. K. Khatua “Concept of Turbulence Modelling and Its Application in Open Channel Flow”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• B. S. Das, K. K. Khatua and K. Devi “Effect of eddy viscosity and secondary flow circulation in compound channel having non prismatic flood plains”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• A. Kumar, P. Singh and K. K. Khatua “Comparision of 2D & 3D Modeling of Converging & Diverging Floodplains”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• S. S. Dash, K. K. Khatua and A. Pradhan, “Modelling of Depth Averaged Velocity in a Meandering Compound Channel”, International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), CWPRS Pune

• K. Devi, K. K. Khatua and J. R. Khuntia, “Prediction of Interacting length for evaluation of Discharge in symmetric and asymmetric compound channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• K. Devi, K. K. Khatua and S. Sial “Apparent Shear Stress in an Asymmetric Compound Channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• K. Devi, K. K. Khatua and R. N. S. D. Samal “Evaluation of Zero Shear Interface Methods in an Asymmetric Compound Channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• A. Pradhan, K. K. Khatua and S. S. Dash “Effect of Roughness on Velocity Distribution Prediction in a Highly Meandering Channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• S. Sankalp, K. K. Khatua and A. Pradhan, “Effect of Roughness on Velocity Distribution Prediction in a Highly Meandering Channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• P. Patel, K. K. Khatua and A. Pradhan, “Discharge Prediction in Straight Compound Channels using Artificial Neural Network”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• A. Nayak, K. K. Khatua and A. Pradhan “Evaluation of Discharge Prediction Methodologies for Compound Meandering Channels”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• B. S. Das, K.K. Khatua and K. Devi “Evaluation of depth averaged velocity and boundary shear stress distribution by Lateral Distribution Method”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune

• D. Khuntia, K. K. Khatua and S. S. Dash “Prediction of Boundary Shear Stress in Highly Meandering Compound Channel”, 21st International Conference on Hydraulics, Water Resources and Coastal Engineering (Hydro2016), December 08-10, 2016, Central Water and Power Research Station (CWPRS), Pune


38

• R. Sahu, C. R. Patra and B. P. Sethy “Prediction of ultimate bearing capacity of eccentrically loaded rectangular footing by ANN”, sixth Indian Young Geotechnical Engineers Conference, March 10-11, 2017, NIT Tirchy, India.

• B. P. Sethy, C. R. Patra and R. Sahu “Ultimate bearing capacity of square foundation on homogeneous sand under eccentric loading”, sixth Indian Young Geotechnical Engineers Conference, March 10-11, 2017, NIT Tirchy, India.

Paper Accepted for Publication• R. N. Behera. “Discussion of Bearing Capacity of Shallow Strip Foundations in Sand under Eccentric and Oblique Loads by R.

Ganesh, Sunil Khuntia, and Jagdish Prasad Sahoo”, International Journal of Geomechanics, ASCE.

• P. N. Mishra, S. K. Das and R Mohanty “Electrical Conductivity of microbially treated Geomaterials and Industrial Wastes”, Journal of Hazardous, Toxic and Radioactive waste, ASCE

• S. N. Sahoo, and P. Sreeja, “Detention ponds for managing flood risk due to increased imperviousness: A case study in an urbanizing catchment of India.” Natural Hazards Review, ASCE.

• U. Chattaraj, D. Kahali and A. K. Das “Studies on Impacts of Gender Mix on Pedestrian Fundamental Diagram,” Journal of European Transport.

• D. Jena and K. C. Biswal “Violent Sloshing and wave impact in a seismically excited tank: A mesh free particle approach”, Journal of Engineering Mechanics, ASCE.

• B. Kumar, K. C. Patra and V. Lakshmi “Evaluating SWAT model outputs uncertainty due DEM resolution and resampling techniques in a large Himalayan River Basin”, Journal of Hydrology Engineering, ASCE

• A. Pradhan and K. K. Khatua “Roughness coefficients in meandering compound channels” Korean Society of Civil Engineers, Springer

Books / Book Chapter• M. Mahamaya and S. K. Das “The Biopolymer Stabilization of Fly Ash and Coal Mine Overburden for Erosion Resistance”

Chapter 11, Biopolymers: Structure, Performance and Applications (Editors: A. K. Mishra, C. M. Hussain and S.B. Mishra), Nova Science Publishers, 2017, ISBN: 978-1-53611-885-8

• M. M. Sahoo, K. C. Patra and J. B. Swain “Analysis and Prediction of Water Quality Using Principal Component Analysis and Neural Network”, Chapter 12, Soil and Water Engineering Principles and Applications of Modeling (Editors: B Panigrahi and M. R. Goyal), Part III: Research Advances in Soil and Water Engineering, E-Book ISBN: 9781771883931

• R. Sahu, C. R. Patra, N. Sivakugan and B. M. Das “Bearing capacity prediction of inclined loaded strip footing on reinforced sand by ANN”. Advances in reinforced soil structures. Springer, pp. 97-109, 2017.

• B. P. Sethy, C. R. Patra, N. Sivakugan and B. M. Das “Prediction of ultimate bearing capacity of eccentrically loaded rectangular foundations using ANN”, Advances in reinforced soil structures. Springer pp. 148-159.

PatentTitle: A corrosion resistant cementitious material from industrial waste

Inventors: S. K. Das, L Garanayak, M. Mahamaya,

Patent Application No. 201731017301/Kol (17.05.2017)


By Faculty:

By Students:

Institution Awards: • Mahasakti Mahamaya: Institution of Engineers (India), Odisha Chapter. For paper ‘Characterization of controlled low strength

material using fly ash and mine over burden’

• Gyana Ranjan Khuntia: Best Master thesis by my M. Tech student at HYDRO-2016 during Dec 2016 at CWPRS, Pune

Technical Association / Societies• Dr. R. N. Behera: Life Member of Indian Geotechnical Society with membership no. (LM 4180).


39

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Prof. P. K. Bhuyan organized (with International Expert) GIAN short term course on “Freight Transportation Demand Modeling”

during December 11-19, 2016 at NIT Rourkela.

• Prof. M. Panda organized (with International Expert) GIAN short term course on “Maintenance and Preservation Treatment of Highways to Economically Enhance Service Life in Sustainable Manner” during December 21-30, 2016 at NIT Rourkela.

• Prof. R. N. Behera attended short term course on “Advanced Engineering Optimization through Intelligent Techniques” during Feb. 06-10, 2017 at NIT Surat.

• Prof. R. N. Behera attended “Recent Advances in Earthquake Geotechnical Engineering” during Nov. 30, 2016 at IIT Bhubaneswar.

• Prof. R. N. Behera attended “6th Asia Pacific Ministerial Conference on Housing and Urban Development (APMCHUD)” during Dec. 14-16, 2016 at Vigyan Bhawan, New Delhi, India.

• Prof. S. K. Das organized Short term course on “Slope stability analysis for Civil and Mining Engineers” during September 28-30, 2016 at NIT Rourkela.

• Prof. S. P. Singh organized short term course on “Advanced Water Treatment Technologies (AWTT -2016)” during October 19-21, 2016 at NIT Rourkela

RESEARCH PROJECTSName of the Project Sponsoring Agency Name of the

PI /Co-PITotal Value


A study on use of fly ash and slag in road pavement

Works Dept. Govt. of Odisha

Prof. M. Panda 44.36 12-10-2015 30-06-2017

Utilisation of fly ash in structural applications

Works Dept. Govt. of Odisha

Prof. S.K. Sahu 32.58 12-10-2015 30-06-2017

Development of a relationship between TIA and EIA for urban Indian catchments

SERB, DSTDr. (Mrs) S. N.

Sahoo27.12 Sep 2016 Sep 2019

Empirical Studies on Level of Service Sensitivity of Railway Footbridges in India and Prediction of Some Safety Measures

SERB, DST Dr. U.Chattaraj 25.87 21-10-2014 02-10-2017

Seismic Performance Assessment of Open Ground Storey Buildings in India

SERB, DST Dr. R. Davis 16.94 Oct 2013 Oct 2016

CONSULTANCY SERVICESSponsor Address Title of the Project Faculty NameJSPL Raigarh Consultancy on Ash dyke C. R. PatraSKS Power Generation Ltd, Raigarh

Design of containment system for fly ash. C. R. Patra

CSPGCLAsh filling works and safety of ash dam at Korba east & Korba west.

C. R. Patra

NTPC Vindyanchal Feasibility study for construction of ash mound. C. R. Patra

NTPC FarakkaButtressing of Nishindra ash dyke lagoon I & II of NTPC Ltd, Farakka.

C.R. Patra

CSPGCL Champa, RaipurPlanning design and preparing for extension of starter dyke of ash bund of Marwa thermal power project.

C. R. Patra

CSPGCL Korba EastScientific study on feasibility of ash filling in low lying area near angle station at KTPS, CSPGCL, Korba East.

C. R. Patra

CSPGCL Korba WestRaising the height of lagoon- I and 1st stage of raising and construction of starter dyke along BC line at ash bund unit- I & II village janbu at HTPS, CSPGCL, Korba west.

C. R. Patra


40

Sponsor Address Title of the Project Faculty Name

NTPC KanihaDesign of ash mound over lagoon- I&II of the disposal area of NTPC Kaniha.

C. R. Patra

NTPC Kaniha Design of lagoon for keeping dredged material of OFL at Stage-II. C. R. Patra

Aditya Aluninum Ltd.Design mix of available natural soil, flyash, bottom ash and bentonite to be used as liner material for ash pond Ludhapali.

C. R. Patra

Aditya Aluminum Ltd. Lapanga, Sambalpur

For planning and design of ash pond of Aditya Aluminium. C. R. Patra

NHAI, Bhubaneswar Road Safety Audit M. PandaRW Dept, Govt. of Odisha New Technology Applications in Roads M. PandaRW Dept, Govt. of Odisha Study of Suitability of slag for use in GSB and Base layer M. PandaNHAI, Keonjhar Conformity of BC I Mix Design M. PandaOMC Ltd., BBSR Scrutiny of DPR of 4-lane CC Road of South Kaliapani Mines M. PandaTrack & Tower Infratech Pvt Ltd, Hyderabad

NTPC-LARA MGR Works, Raigarh, RITES, Track & Tower R. N. Behera

Essar Power, Orissa Ltd, Paradeep Design, vetting of clay liner ash area S. K. Das

National Rural Roads Development Agency (NRRDA), Govt. of India

Scrutiny of PMGSY and ADB Sponsored Rural Road ProjectsM. Panda and S. P. Singh etc.

L & T Constructions, JharsugudaConstruction of new proposed Railway siding of OPGC Ltd, at IB Thermal Banaharpalli

S. P. Singh and S. K. Das

L&T Limited, Transportation Infrastructure

Proof-checking of POT-PTFE bearing design P. Sarkar, R. Davis

ARSS Infrastructure Projects Ltd. Structural Design Proof-checking of Station BuildingR. Davis, P. Sarkar and K. K. Khatua

WOODHILL Infrastructure Projects Ltd.

Structural Design Proof-checking of Station BuildingP. Sarkar, R. Davis and K. K. Khatua

Odisha Industrial Infrastructure Development Corp.

Structural Design Proof-checking of RC BuildingsP. Sarkar, K. C. Patra and R. Davis

WOODHILL Infrastructure Projects Ltd.

Structural Design Proof-checking of Staff Quarters R. Davis and P. Sarkar

ARSS Infrastructure Projects Ltd. Structural Design Proof-checking of Staff Quarters P. Sarkar and R. DavisMahanadi Coalfields Limited, Orient Area

Condition Assessment of Buildings at Mahanadi Coalfields Limited

R. Davis, P Sarkar and S K Sahu

Asthalakshmi Construction Structural Design Proof-checking of Box-girder Bridge R. Davis and P. SarkarPluto Plaza Pvt. Ltd. Structural Design Proof-checking of shopping mall cum multiplex P. Sarkar and R. DavisARSS Infrastructure Projects Ltd. Structural Design Proof-checking of box-culvert P. Sarkar and R. Davis

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCE

Name of the Project

Sponsoring Agency

Name of the Coordinator




41

LIST OF LABORATORIES DEVELOPED 1. Structural Engineering Laboratory2. Highway Concrete Laboratory3. Geotechnical Engineering Laboratory4. Environmental Engineering Laboratory5. Surveying Laboratory6. Remote Sensing Laboratory7. Material Testing Laboratory8. Hydraulic Machine Laboratory9. Fluid Mechanics Laboratory10. Computer Laboratory-I11. Computer Laboratory-II


Madhusmita Biswal Vibration, Buckling and Dynamic Stability of Laminated Composite Curved Panels in Hygrothermal Environment

Prof. S. K. Sahu and Prof.(Ms.) A. V. Asha

Kirtikanta Sahoo Studies on Concrete made of Recycled Materials for Sustainability Prof. P. Sarkar and Prof. R. DavisNibedita Guru Flood Frequency Analysis of Partial Duration Series using Soft

Computing Techniques of Mahanadi River Basin In IndiaProf. Ramakar Jha

Himanshu Sekhar Panda

Vibration, Buckling and Parametric Instability of Delaminated Composite Panels in Hygrothermal Environment

Prof. S. K. Sahu

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis Supervisor

Pragyan Paramita Das Primary and Secondary Compression Behaviour of Soft Clay Prof. C. R. Patra

Kajal Panigrahi Experimental Study of Flow through Rigid Vegetation in Open Channel

Prof. K. K. Khatua and Prof. K .C. Patra

Sumit B. Kumaranerjee

Experimental Study On Resistance in Gravel Bed Channels Prof. K. K. Khatua


42

Department of CHEMICAL ENGINEERING


73 | P a g e





53

24

7

0

10

20

30

40

50

60

B.Tech. M.Tech. (2 Years) Ph.D.

188

5247

0

20

40

60

80

100

120

140

160

180

200

B.Tech M.Tech (2 Years) M.Tech Dual (5 Years)


73 | P a g e





53

24

7

0

10

20

30

40

50

60

B.Tech. M.Tech. (2 Years) Ph.D.

188

5247

0

20

40

60

80

100

120

140

160

180

200



74 | P a g e

FACULTY:

SL Name & Specialization1 Prof. (Ms.) Abanti Sahoo ([email protected])

Associate Professor, Ph. D. (Sambalpur University)Fluidization and Bioenergy

2 Prof. Santanu Paria ([email protected])Associate Professor, Ph. D. (IIT, Bombay)Nanotechnology and Interfacial phenomena

3 Prof. Pradip Chowdhury ([email protected])Assistant Professor, Ph. D. (IIT, Guwahati)Adsorptive gas separation and energy storage; Photocatalysis and polymer degradation; Membrane separation; Modeling, simulation and conceptual designing of distillation processes

4 Prof. Sujit Sen ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Heterogeneous Catalysis, Green Technology and Engineering. Synthesis of fine chemicals, zeolites

5 Prof. Akhilesh Kumar Sahu ([email protected])Assistant Professor, Ph. D. (IIT, Kanpur)Thin-film Dynamics, Interfacial Fluid Mechanics, Non-Newtonian Flows, Computational Fluid Dynamics

6 Prof. Hara Mohan Jena ([email protected])Assistant Professor, Ph. D. (NIT, Rourkela)Process Dynamics and Control, Multiphase Fluidization

7 Prof. (Ms.) Madhushree Kundu ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Fluid Phase Equilibrium, Process Modeling; Simulation & Control, Chemometrics

8 Prof. Arvind Kumar ([email protected])Assistant Professor, Ph. D. (IIT, Roorkee)Industrial Pollution Abatement, Disaster Management, Petroleum Refining

9 Prof. Soumya Sanjeeb Mohapatra ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Heat transfer operations

10 Prof. (Ms.) Susmita Mishra ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Biochemical Engineering, Adsorption, Environmental Engineering

1

3

2

1 1 1

3

2 2

1

3

2

6

3

5

2

0

1

2

3

4

5

6

7

AffineAnalytics

Deloitte EXL Service L&TConstruction

Mu Sigma Pradan Sun Pharma Vedanta


43

FACULTY:SL Name & Specialization1 Prof. (Ms.) Abanti Sahoo ([email protected])

Associate Professor, Ph. D. (Sambalpur University)Fluidization and Bioenergy

2 Prof. Santanu Paria ([email protected])Associate Professor, Ph. D. (IIT, Bombay)Nanotechnology and Interfacial phenomena

3 Prof. Pradip Chowdhury ([email protected])Assistant Professor, Ph. D. (IIT, Guwahati)Adsorptive gas separation and energy storage; Photocatalysis and polymer degradation; Membrane separation; Modeling, simulation and conceptual designing of distillation processes

4 Prof. Sujit Sen ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Heterogeneous Catalysis, Green Technology and Engineering. Synthesis of fine chemicals, zeolites

5 Prof. Akhilesh Kumar Sahu ([email protected])Assistant Professor, Ph. D. (IIT, Kanpur)Thin-film Dynamics, Interfacial Fluid Mechanics, Non-Newtonian Flows, Computational Fluid Dynamics

6 Prof. Hara Mohan Jena ([email protected])Assistant Professor, Ph. D. (NIT, Rourkela)Process Dynamics and Control, Multiphase Fluidization

7 Prof. (Ms.) Madhushree Kundu ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Fluid Phase Equilibrium, Process Modeling; Simulation & Control, Chemometrics

8 Prof. Arvind Kumar ([email protected])Assistant Professor, Ph. D. (IIT, Roorkee)Industrial Pollution Abatement, Disaster Management, Petroleum Refining

9 Prof. Soumya Sanjeeb Mohapatra ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Heat transfer operations

10 Prof. (Ms.) Susmita Mishra ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Biochemical Engineering, Adsorption, Environmental Engineering

11 Prof. Basudeb Munshi ([email protected])Associate Professor, Ph. D. (BITS, Pilani)Separation Technology (Reactive Distillation), Process Control and CFD

12 Prof. Aditya Kumar ([email protected])Assistant Professor, Ph. D. (University of Siegen, Germany)Nanotribology, Nanomechanics, Interfacial Science, and Biomimetics

13 Prof. Raghubansh Kumar Singh ([email protected])Professor, Ph. D. (Sambalpur University)Fluidization Engg, Thermodynamics and Chemical Reaction Engineering, Bio Fuels

PUBLICATION

Publications in Journals• Suneeta Kumari,, Sri Hari Kumar Annamareddy, Sahoo Abanti and Pradip Kumar Rath, “Physicochemical properties

and characterization of chitosan synthesized from fish scales, crab and shrimp shells”, International Journal of Biological Macromolecules, Available online 1 May 2017.

• Pranati Sahoo and Abanti Sahoo, “Fluidized bed reactor for treatment of gaseous pollutant: Flourides a case study”, Process Safety and Environmental Protection 1 0 3 ( 2 0 1 6 ) 259–270 : Available online 9th August 2016.

• K. Jagajjanani Rao and S. Paria. J. “Phytochemicals Mediated Synthesis of Multifunctional Ag-Au-TiO2 Heterostructure for Photocatalytic and Antimicrobial Applications.” J. Cleaner Production. 165, 360-368, 2017.

• K. Jagajjanani Rao, N. V. S. Praneeth, and S. Paria. “A Promising Technique of Aegle Marmelos Leaf Extract Mediated Self-Assembly for Silver Nanoprism Formation.” AIChE J. Accepted, 2017.


44

• N. Saxena, T. Naik, and S. Paria. “Organization of SiO2 and TiO2 Nanoparticles into Fractal Patterns on Glass Surface for the Generation of Superhydrophilicity.” J. Phys. Chem. C. 121, 2428–2436, 2017.

• R. Purbia and S. Paria “Au/AgBr-Ag Heterostructure Plasmonic Photocatalyst with Enhanced Catalytic Activity under Visible Light.”. Dalton Transactions. 46, 890-898, 2017.

• Prince George, N Dhabarde and P Chowdhury, “Rapid synthesis of Titanium based Metal Organic framework (MIL-125) via microwave route and its performance evaluation in photocatalysis,” Materials Letters, 186, 151-154, 2017, cited by 02 [On line].

• Ujjal Mondal, Sujit Sen, “Multivariate Analysis in Selective Nitroacetophenone Conversion by Hydrogen Sulfide under Phase Transfer Catalysis”, Org. Process Res. Dev. 2017, 21 (1), 23-30.

• Sujit Sen, Ujjal Mondal, Gaurav Singh, “Dual Optimization in Phase Transfer Catalyzed Synthesis of Dibenzyl Sulfide using Response Surface Methodology (RSM)”, Org. Process Res. Dev. 2016, 20 (10), 1765–1773.

• Preeti Jha, Ujjal Mondal, Devipriya Gogoi, Gaurav Singh, Sujit Sen, “Novelties of selective triphasic synthesis of bis-(p-chlorobenzyl) sulfide using hydrogen sulfide and reusable phase transfer catalyst”, J Mol. Catal. A: Chem. 2016, 418, 30-40.

• Gaurav Singh, Priya G. Nakade, Dorothy Chetia, Preeti Jha, Ujjal Mondal, Saroj Kumari, Sujit Sen, “Kinetics and mechanism of phase transfer catalyzed synthesis of aromatic thioethers by H2S-rich Methyldiethanolamine”, J Ind. Eng. Chem. 2016, 37, 190-197.

• Gaurav Singh, Priya G. Nakade, Pratik Mishra, Preeti Jha, Sujit Sen, Ujjal Mondal, “Kinetic investigation on liquid–liquid–solid phase transfer catalyzed synthesis of dibenzyl disulfide with H2S-laden monoethanolamine”, J Mol. Catal. A: Chem. 2016, 411, 78–86

• Ujjal Mondal, Aslam Puthankot, Sujit Sen, Gaurav Singh, “Novelties of triphasic phase transfer catalysed Zinin reduction of nitrochlorobenzene by H2S-laden monoethanolamine”, RSC Adv., 2016, 6, 23666-23676.

• Arvind Kumar and Hara Mohan Jena. “Removal of methylene blue and phenol onto prepared activated carbon from Fox nutshell by chemical activation in batch and fixed-bed column”, Journal of Cleaner Production: Volume 137 (2016), Page 1246-1259.

• Arvind Kumar and Hara Mohan Jena. “Preparation and characterization of high surface area activated carbon from Fox nut (Euryale ferox) shell by chemical activation with H3PO4”. Results in Physics: Volume 6 (2016), Page 651-658.

• Sangram Shamrao Patil and Hara Mohan Jena. “Isolation and Characterization of phenol degrading bacteria from soil contaminated with paper mill wastewater”. Indian J Biotechnology: Volume 15 (3) (2016), Page 407-411.

• Arvind Kumar and Hara Mohan Jena. “Adsorption of Cr(VI) from aqueous solution by prepared high surface area activated carbon from Fox nutshell by chemical activation with H3PO4”. Journal of Environmental Chemical Engineering: Volume 5 (2017), Page 2032–2041.

• Arvind Kumar and Hara Mohan Jena. “Adsorption of Cr(VI) from aqueous phase by high surface area activated carbon prepared by chemical activation with ZnCl2”. Process Safety and Environmental Protection: Volume 109 (2017), Page 63–71.

• Satya Sundar Mohanty and Hara Mohan Jena. “Biodegradation of Phenol by Free and Immobilized Cells of a Novel Pseudomonas sp. nbm11”. Brazilian Journal of Chemical Engineering: Volume 34 (01) (2017), Page 75 – 84.

• Omar, Rahul, Jena, Hara Mohan, 2017. “Statistical Analysis of the Dynamic Liquid Saturation in a Trickle Bed”. International Journal of Chemical Sciences: Volume 15(2) (2017), Page 133.

• Kundu, M., and S. Adak. “Vapour-liquid equilibrium and physicochemical properties of novel aqueous blends of (2-Diethylaminoethanol+ Piperazine) for CO2 appropriation”. Journal of Chemical & Engineering Data, 2017, 62 (7), pp 1937–1947.

• Kundu, M., and Damarla, Seshu, K. “Generalized mathematical model of chronic Hepatitis C infection, Journal of Fractional Calculus and Applications”. 2017, Vol. 8(2), pp. 1-19.

• Das, Sougat and Kundu, M. “Performance of Hydrocarbon Based Mixed Refrigerants in Cryocoolers”. International Journal of Engineering Trends and Technology (IJETT), 2016, Vol. 41(4), 170-174.

• Sougat Das and Madhusree Kundu. “Evaluation of Green Refrigerant Performance for VCR”. International Journal of new Technologies in Science and Engineering (IJNTSE). 2016, Vol. 3(12), 26-34.

• B. P. Patel, A. Kumar. “Biodegradation of 2,4-dichlorophenol by Bacillus endophyticus strain: optimization of experimental parameters using response surface methodology and kinetic study”, Desalination and Water Treatment 57(34) 15932-15940 (2016).

• B. P. Patel, A. Kumar “Multi-substrate biodegradation of chlorophenols by defined microbial consortium”. 3 Biotech (2016).

• B. P. Patel, A. Kumar “Biodegradation of 4-chlorophenol in an airlift inner loop bioreactor with mixed consortium: effect of HRT, loading rate and biogenic substrate”. Biotech (2016), 6:117.

• L. S. Singh, B. K. Mishra, A. Kumar “Removal of phenol from aqueous solution by Mahua seed activated carbon: Kinetic, isotherm, mass transfer and isosteric heat of adsorption studies” Chem. Ind. Chem. Eng. Q. 22 (3) 263−273 (2016).


45

• B. P. Patel, A. Kumar “Optimization study for maximizing 2, 4-dichlorophenol degradation by Kocuria rhizophila strain using response surface methodology and kinetic study” Desalination and Water Treatment 57(39) 18314-18325 (2016).

• Debalaxmi Pradhan, R.K. Singh, Harisankar Bendu, Rachna Mund, “Pyrolysis of Mahua seed (Madhuca indica) – Production of biofuel and its characterization”, Energy Conversion and Management 108 (2016) 529–538.

• Tanmya Rout, Debalaxmi Pradhan, R.K. Singh, Namrata Kumari. “Exhaustive study of products obtained from coconut shell pyrolysis”. Journal of Environmental Chemical Engineering (2016).

• Ashish Dewangan, Debalaxmi Pradhan, R.K. Singh, “Co-pyrolysis of sugarcane bagasse and low-density polyethylene: Influence of plastic on pyrolysis product yield”, Fuel, 185 (2016), 508-516.

• V. K. Singh, A. B. Soni, R. K. Singh, “Process Optimization Studies of Malachite Green Dye Adsorption onto Eucalyptus (Eucalyptus globules) Wood Biochar Using Response Surface Methodology”, Oriental journal of chemistry, Vol. 32, No. (5), 2621-2631, 2016.

• Singh, V. K., A. B. Soni, and R. K. Singh. “Auramine O Dye Adsorption onto Ganga Imli (Pithecellobium Dulce) Wood Biochar: Process Optimization Using RSM.” International Journal of Chemical Sciences 14, no. 4, 2116-2138, 2016.

• Singh, V. K., A. B. Soni, and R. K. Singh. “Auramine ‘O’dye adsorption onto de-oiled cotton seed cake biochar: process optimization using Response Surface Methodology for maximizing adsorbate removal.” International journal of chemtech research, Vol.9, No.07 pp 340-353, 2016

• V. K. Singh, A. B. Soni, R. K. Singh, “Comparitive study of central composite and Box-Behnken design for the optimization of dye malachite green adsorption onto activated sal seed (shorearobusta) biochar”, Journal of Enivironmental Biology vol 38(7), 2017.

• Adya Das and Susmita Mishra. “Decolorization of Different Textile Azo Dyes using an Isolated Bacterium Enterococcus durans GM13.” Int. J. Curr. Microbiol. App. Sci 5, no. 7, pp. 676-686, 2016.

• Adya Das and Susmita Mishra. “Removal of textile dye reactive green-19 using bacterial consortium: Process optimization using response surface methodology and kinetics study.” Journal of Environmental Chemical Engineering 5, no. 1, pp. 612-627, 2016.

• Shilpi Das and Susmita Mishra. “Box-Behnken statistical design to optimize preparation of activated carbon from Limonia acidissima shell with desirability approach.” Journal of Environmental Chemical Engineering 5, no. 1, pp. 588-600, 2017.

• M. A. Devani, B. Munshi, J. U. K. Oubagaranadin, B. B. Lal and S. Mandal, “Remediation of Hg(II) from solutions using Cajanus cajan husk as a new sorbent” Environmental Technology, vol. `38, pp. 1878-1889, 2017.

• N.H. Bhatt, Lily, R. Raj, P. Varshney, A.R. Pati, D. Chouhan, A. Kumar, B. Munshi, and S.S. Mohapatra, “Enhancement of heat transfer rate of high mass flux spray cooling by ethanol-water and ethanol-tween20-water solution at very high initial surface temperature”, International Journal of Heat an d Mass Transfer, vol. 110, pp. 330-347, 2017,

• N.H. Bhatt, D. Chouhan, A. R. Pati, P. Varshney, L. Das, A. Kumar, B. Munshi, A. Behera and Soumya S. Mohapatra, “Role of Water Temperature in Case of High Mass Fl ux Spray Cooling of a Hot AISI 304 Steel Plate at Different Initial Surface Temperatures”, Experimental Heat Transfer, vol. 30, pp. 369-390, 2017.

• A. Khapre, D. Rajavaths avai and B. Munshi, “Study on residence time distribution of CSTR using CFD”, Indian Journal of Chemical Technology, vol. 100, pp. 975- 991, 2016.

• A. Khapre and B. Munshi, “Data on the mixing of non-Newtonian fluids by a Rushton turbine in a cylindrical tank”, Data in Brief, vol. 8, pp. 1416-1432, 2016.

Publications in Conferences• Dr. Abanti Sahoo delivered a talk On ‘Municipal Wastes’, In TEQIP sponsored Short term Course “Industrial And municipal

waste management” organised by Mechanical Engg. Dept., NIT Rourkela during 24-25th Jan-2017

• Vikas Kumar, R.K. Singh and P Chowdhury, “Separation of Chromium (VI) Contaminant by using Sunflower oil as a Green Solvent in Liquid Membrane Application,” International Conference on Water: From Pollution to Purification (ICW 2016), December 12-15, 2016, School of Environmental Sciences, Advanced Centre of Environmental Studies and Sustainable Development (ACESSD), Mahatma Gandhi University, Kottayam, Kerala. (Abstract ID: P-62), page no. 72 in ICW 2016 souvenir).

• Vikas Kumar, R.K. Singh and P Chowdhury, “Proficient Liquid membrane reusability studies for maximizing the utilization of resources for the facilitated transport of Lignosulfonate from the paper mill effluent”, Young Scientist Conclave, India International Science Festival (IISF 2016), December 5-10, 2016, National Physical Laboratory, New Delhi.

• Sivamani S, Sujit Sen, “Resource Recovery of Waste Fly-ash in Synthesis of Zeolite”, Indian Chemical Engineering Congress (CHEMCON-2016), ACTEM, IIT Madras, December 27-30, 2016.

• Kundu M., Kundu P. (2016). Classification of Tea Samples Using SVM as Machine Learning Component of E-Tongue, In the proceedings of IEEE sponsored International Conference on Intelligent Control, Power and instrumentation (ICICPI-2016) held during October 21-23, 2016, Kolkata, India.


46

• S. Adak and M. Kundu (2016). CO2 Capture Using Novel (Trisodium Salt of Nitrilotriacetic acid +Piperazine) Blend. In the proceedings of Chemcon 2016, held during 27-30 December 2016 at Chennai, India.

Paper Accepted for Publication• B. P. Patel, A. Kumar “Biodegradation and Co-metabolism of Monochlorophenols and 2,4-Dichlorophenol by Microbial

Consortium” (doi:10.1002/clen.201700329).

• Sayantani Sikdar, Madhusree kundu, “ Detection and abatement of heavy metals”, ChemBioEng Review, 2017 (accepted)

Books • Harjeet Nath and Abanti Sahoo, “Abatement of Fluorides by Fluidized Bed Reactor: Aspen Plus Simulation”, LAP LAMBERT

Academic Publishing (2016-04-14).

• Madhusree Kundu, Palash Kundu, Seshu Kumar Damarla (2017). “A Chemometric Approach to Monitoring: Product Quality Assessment, Process Fault Detection and Miscellaneous Applications”, CRC Press, Taylor & Francis Group (In Press) (https://www.crcpress.com/Chemometric-Monitoring-Product- Quality-Assessment-Process-Fault-Detection/Kundu-Kundu-Damarla/p/book/9781498780070).

• Soumya R. Sahoo, Madhusree Kundu, “Control of Plant Wide Processes Using Fractional Order Controller”, ISBN (978‐3‐659‐93660‐9), LAP LAMBERT academy publishing, Category: Technology, Published on August 2016.

• Gangotree Rai, Madhusree Kundu, “Fault Detection and Diagnosis in Chemical and Plant-Wide Processes through Signed Diagraph”, ISBN (978-3-330-33115-0), LAP LAMBERT academy publishing, Category: Technology, Published on 19 July 2017.

Book Chapter• “Clay-Semiconductor Nanocomposites for Photocatalytic Applications.” N. V. S. Praneeth and Santanu Paria, Clay Minerals:

Properties, Occurrence and Uses, Chapter-5, Nova Science Publishers, Inc., USA, 2017, ISBN: 978-1-53610-838-5.

Patent


By Faculty:

By Students:

Technical Association / SocietiesDr. H.M. Jena, Honorary Regional Secretary of IIChE Rourkela Regional Centre

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Dr. Arvind Kumar organized (Course coordinator) STC on INDUSTRIAL & MUNCIPAL WASTE MANAGEMENT from 24/01/2017

to 25/01/2017 at NIT Rourkela.

• Dr. Arvind Kumar organized (Course coordinator) STC on INDUSTRIAL SAFETY AND HAZARDS MANAGEMENT from 03/10/2016 to 04/10/2016 at NIT Rourkela.


47


AgencyName of the PI Total Value (Rs.

in Lakhs)Start Date Close Date

Development of Yolk/Shell or Movable Core/shell Type Novel Nanocatalysts for the Production of Methanol via Photochemical Reduction of CO2

BST-SERB Santanu Paria 38 Sep 2016 Aug 2019

Fundamental Investigations of Cationic Surfactants with Bitumen Product Components

Shell India Pvt. Ltd., Bangalore

Santanu Paria 25 Aug 2014 July 2019

Two stage synthesis of aromatic thioethers using hydrogen sulfide and reusable phase transfer catalyst

SERB, DST Dr. Sujit Sen 24.62 24-07-2013

23-07-2016

Numerical Study of Coating Flows on Non-flat Discrete Objects

SERB-DST Akhilesh Kumar Sahu

23 Sep 2016 Sep 2019

Study the feasibility of treatment of seepage water from chromite mine quarries of Odisha

Ministry of Mines, Govt of

India, New delhi

S.Mishra 32 1-4-2016 31-3-2019



Name of the Project

Sponsoring Agency Name of the Coordinator




PH.D. DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis SupervisorMr. Deo Karan Ram Experimental and Computational Studies on Fluidized Bed Reactor for

Production of Clean EnergyAbanti Sahoo

Gaurav Singh Phase Transfer Catalyzed Synthesis of Organosulfur Fine Chemicals using Hydrogen Sulfide

Dr. Sujit Sen

Ujjal Mondal Chemoselective Reduction of Nitroarenes using Hydrogen Sulphide under Phase Transfer Catalysis

Dr. Sujit Sen

Arvind Kumar Preparation and Characterization of novel activated carbon for adsorption and adsorption assisted biodegradation of organic and inorganic water pollutants

Dr. Hara Mohan Jena

Ms. Adya Das A Study on Evaluation of Indigenous Microbial Consortium for Enhanced Decolorization of Textile Azo Dyes and Feasibility for Simultaneous Bioelectricity Generation in A Microbial Fuel Cell

Dr. S.Mishra


48


Preeti Jha Two Stage Synthesis of Aromatic Thioether using HydrogenSulfide and Reusable Phase Transfer Catalyst

Dr. Sujit Sen

Shaleka Agrawal Thin-liquid-film flow on a topographically patterned rotating cylinder Dr. Akhilesh Kumar Sahu

Ms. Shreeparna Mishra Preparation and Characterization of Cassia 4-Hydroxy benzoic acid resin for Removal of Cr6+ from water

Dr.S.Mishra

Department of CERAMIC ENGINEERING


84 | P a g e





25

12

7 7

0

5

10

15

20

25

30

B.Tech. M.Tech. ( 2 Years) M.Tech Dual (5 Years) Ph.D.

116

22

42

0

20

40

60

80

100

120

140



84 | P a g e





25

12

7 7

0

5

10

15

20

25

30

B.Tech. M.Tech. ( 2 Years) M.Tech Dual (5 Years) Ph.D.

116

22

42

0

20

40

60

80

100

120

140



49


85 | P a g e

FACULTY

SL Name & Specialization1 Prof. Santanu Bhattacharyya, ([email protected])

Professor, Ph.D. (IIT Kanpur)Ceramic Processing, Green shape forming, Structural ceramics

2 Prof. Japes. Bera ([email protected])Professor, Ph.D. (Calcutta University)Ferrite, Ferroelectrics

3 Prof. Swadesh K. Pratihar, ([email protected]) Associate Professor & HOD, Ph.D. (Jadavpur University)Electroceramics, Solid Oxide Fuel Cells

4 Prof. Ritwik Sarkar, ([email protected])Associate Professor, Ph.D. (Jadavpur University)Refractory, Bioceramics, Industrial Solid Waste Management

5 Prof. D. Sarkar, ([email protected])Associate Professor, Ph.D. (NIT Rourkela)Structural Ceramics

6 Prof. Bibhuti B. Nayak, ([email protected])Associate Professor, Ph.D. (IIT Bombay)Phosphor materials, Porous materials, Ferromagnetic, Magnetic-dielectric composite materials, Solid-oxide fuel cell, Nanostructured materials

7 Prof. Ranabrata Mazumder,([email protected])Associate Professor, Ph.D. (Jadavpur University)Electroceramics

8 Prof. Sumit Kumar Pal, ([email protected])Assistant Professor, Ph.D. (Jadavpur university)Glass and Glass Ceramic

9 Prof. Shantanu K. Behera, ([email protected])Assistant Professor, Ph.D. (Lehigh University , USA)Grain-Boundary Engineering, Li-ion Batteries, Graphene, Polymer Derived Ceramics

10 Prof. (Mrs.) SunipaBhattacharyya,([email protected])AssistantProfessor, Ph.D. (Jadavpur University)

1 1

4

2

1

2 2

1

5

3

4

1 1

0

1

2

3

4

5

6

AakashInstitute

BhushanPower &

Steel Limited(BPSL)

FuturaCeramics

Imerys Somany TRL KrosakiRefractories

Ltd.

Vedanta

FACULTYSL Name & Specialization1 Prof. Santanu Bhattacharyya, ([email protected])

Professor, Ph.D. (IIT Kanpur)Ceramic Processing, Green shape forming, Structural ceramics

2 Prof. Japes. Bera ([email protected])Professor, Ph.D. (Calcutta University)Ferrite, Ferroelectrics

3 Prof. Swadesh K. Pratihar, ([email protected]) Associate Professor & HOD, Ph.D. (Jadavpur University)Electroceramics, Solid Oxide Fuel Cells

4 Prof. Ritwik Sarkar, ([email protected])Associate Professor, Ph.D. (Jadavpur University)Refractory, Bioceramics, Industrial Solid Waste Management

5 Prof. D. Sarkar, ([email protected])Associate Professor, Ph.D. (NIT Rourkela)Structural Ceramics

6 Prof. Bibhuti B. Nayak, ([email protected])Associate Professor, Ph.D. (IIT Bombay)Phosphor materials, Porous materials, Ferromagnetic, Magnetic-dielectric composite materials, Solid-oxide fuel cell, Nanostructured materials

7 Prof. Ranabrata Mazumder,([email protected])Associate Professor, Ph.D. (Jadavpur University)Electroceramics

8 Prof. Sumit Kumar Pal, ([email protected])Assistant Professor, Ph.D. (Jadavpur university)Glass and Glass Ceramic

9 Prof. Shantanu K. Behera, ([email protected])Assistant Professor, Ph.D. (Lehigh University , USA)Grain-Boundary Engineering, Li-ion Batteries, Graphene, Polymer Derived Ceramics

10 Prof. (Mrs.) SunipaBhattacharyya,([email protected])AssistantProfessor, Ph.D. (Jadavpur University)Processing and Characterisation of ceramic materials, Structural ceramic, Ceramic adsorbents

11 Prof. Sudip Dasgupta, ([email protected])Assistant Professor, Ph.D. (Washington State University, USA)Biomaterials and Drug delivery

12 Prof. Arindam Paul, ([email protected])Assistant Professor, Ph.D. (IISC Banagalore)Structural Ceramics, Mechanical Behavior, Composite Materials, Non-equilibrium Processing of Ceramics


50

SL Name & Specialization13 Prof. Partha Saha, ([email protected])

Assistant Professor, Ph.D. (The University of Alabama, USA)Light Metal, Ceramics, Batteries, Nanomaterials Synthesis

14 Dr. Arun Chowdhury ([email protected])Assistant professor, M.Tech. (IIT-BHU)Electroceramics

PUBLICATION

Publications in Journals• Sanjay Krishna Mohan and Ritwik Sarkar, Effect of insitu generated nascent magnesia and alumina from nitrate precursor on

reaction sintered magnesium aluminate spinel, Materials and Design, 110, 145–156 (2016).

• Akhilesh K Singh and Ritwik Sarkar, Development of spinel sol bonded high pure alumina castable, Ceramic International. 42 [15] 17410–17419 (2016).

• Venkatesh Pilli and Ritwik Sarkar, A comparative study on bonding systems in alumina-silicon carbide-carbon-based trough castable, Iron making and steel making, 43 [9] 705 - 711 (2016).

• Satyananda Behera and Ritwik Sarkar, Effect of different metal powder anti-oxidants on N220 nano carbon contains low carbon MgO-C refractory, Ceramic International, 42 [16] 18484 – 18494 (2016).

• Sanjay Krishna Mohan and Ritwik Sarkar, Reaction sintered zinc oxide incorporated magnesium aluminate spinel from commercial grade oxide reactants, Journal of the Australian Ceramic Society, 53 [1] 207–216 (2017).

• Rupita Ghosh, Ritwik Sarkar, Soumitra Paul, Hydroxyapatite based machinable bioceramic: an in depth investigation on drilling parameters and bioactivity, Journal of Alloys and Compounds, 723 [5] 43–49 (2017).

• Ritwik Sarkar and Adityapratap Dhall Samant, Study on the effect of deflocculant variation in high alumina low cement castable, Interceram- Refractories Manual, (2016) 28-34.

• Ritwik Sarkar and Jotothu Srinivas, Effect of cement and sol combined binders on high alumina refractory castables, Refractories World Forum, 8 [4] 73 – 78 (2016).

• Ritwik SarkarParticle size distribution for refractory castables: a review, Interceram, 65 [3] 82-86 (2016).

• Kandi, K.K., Punugupati, G., Pal, S.K., Rao Chilakalapalli, S.P. ; Effect of Monomers Content and their Ratio on Gelcasting of Fused Silica Ceramics;Transactions of the Indian Ceramic Society;75 (3), pp. 185-188.

• K. Sarath, M. Monalisa, G. Ulahannan, D. Sarkar, H. S. Maiti, “Preparation of YAG Nanopowder by Different Routes and Evaluation of their Characteristics including Transparency after Sintering”, J Australian Ceram Soc, DOI: 10.1007/s41779-017-0088-9, 2017.

• S. Adhikari, S. Mandal, D. Sarkar, D. H. Kim, G. Madras, Novel nanoadsorbent WO3 for dye removal: kinetics and equilibrium, Applied Surface Science, 420, 472–482, 2017.

• D. Sarkar, S. Mandal, B.S. Reddy, N. Bhaskar, D. Sundaresh, B. Basu, ZrO2-toughened Al2O3-based near-net shaped femoral head: Unique fabrication approach, 3D microstructure, burst strength, Materials Science & Engineering C. 77 [1] 1216-1227, 2017.

• S. Adhikari, R. Swain, D. Sarkar, G. Madras, Wedge-like WO3 architectures for efficient electrochromism and photoelectrocatalytic activity towards water pollutants, Molecular Catalysis, 432, 76-87, 2017.

• S. Adhikari, R. Gupta, A.Surin, T. Satish Kumar, S. Chakraborty, D.Sarkar, G. Madras, Visible light assisted improved photocatalytic activity of combustion synthesized spongy-ZnO towards dye degradation and bacterial inactivation, RSC Advances; 6, 80086-80098, 2016.

• B.K. Barkey, S.S. Das, A. Meher, P. Saha, Preparation and Microstructural Characterization of Niobium Pentaoxide Doped Barium Strontium Titanate Glass and Glass-Ceramics, Transaction of Indian Ceramic Society, 76 [1] 21–30, 2017.

• Soumini Mondal, Sudip Dasgupta,.KanchanMaji “MgAl- Layered Double Hydroxide Nanoparticles for controlled release of Salicylate”, Materials Science and Engineering: C ,Volume 68, pp 557-564, 2016.

• Sunipa Bhattacharyya and Pallavi Suhasini Behera “Synthesis and characterization of nano-sized α-alumina powder from kaolin by acid leaching process” Applied Clay Science, 146 [286-290] 2017.

• Sunipa Bhattacharyya and Rupali Singh “Effect of solution ph on mullite phase formation from a diphasic precursor powder” journal of the Australlian ceramic society, 52 [20-31], 2016.

• Pallavi Suhasini Behera, Sunipa Bhattacharyya and Ritwik Sarkar, Nano alumina: A review of powder synthesis methods, Interceram, 65, [10-16], 2016.


51

• N. Singh, R. Mazumder, P. Gupta, D. Kumar, “Polymer-assisted co-precipitation route for the synthesis of Al2O3–13% TiO2 nanocomposite”, Bull. Mater. Sci. Vol. 40, No. 3, pp. 527–535, 2017.

• R Vinaykumar, R. Mazumder, J. Bera, “Characterization of SrCo1.5Ti1.5Fe9O19 hexagonal ferrite synthesized by sol-gel combustion and solid state route”, Journal of Magnetism and Magnetic Materials Vol.429, pp 359-366, 2017

Publications in Conferences• Sudip Dasgupta, “Controlled Release of Ibuprofen using Mg Al LDH Nano Carrier” International Conference on Materials,

Alloys and Experimental Mechanics (ICMAEM) 2017.

• G.Jayarao, R.Mazumder, S.Bhattacharyya, P.Chaudhuri, “Electrical and thermal properties of Li4SiO4 - Li2TiO3 Composite Ceramic Prepared by Solid-State Synthesis Method”, 2nd Workshop on Lithium Ceramics for Tritium Breeding (LCTB-2016) held at IIT Madras during 23-24, August 2016.

• R. Mazumder, G. Jayarao, “Development of Li4SiO4 Ceramics for Test Blanket Module: Addressing Some Critical Issues from Powder Synthesis to Pebble Fabrication” 2nd Workshop on Lithium Ceramics for Tritium Breeding (LCTB-2016) held at IIT Madras during 23-24, August 2016.

• P. Adhikari, R.Mazumder, S. Abhinay “Electrical and Mechanical Properties of 0.5Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3 (BZT–0.5BCT) composite Ceramics Reinforced by Small Amount of Nano-oxides”, International Conference on Technologically Advanced Materials (ICTAM) and Asian Meeting on Ferroelectricity (AMF10)” November 7-11, 2016 at University of Delhi, New Delhi.

• S. Abhinay, R. Mazumder, “Phase Evolution, Densification and Electrical Properties of 0.9[KNbO3] -0.1 [BaNi½Nb½O3-δ] Semiconducting Ferroelectric Ceramics Prepared By Conventional Sintering and Microwave Sintering”, International Conference on Technologically Advanced Materials (ICTAM) and Asian Meeting on Ferroelectricity (AMF10)” November 7-11, 2016 at University of Delhi, New Delhi.

• A. Chowdhury, Electrical and Magnetic Behavior of Magnetoelectric BaTiO3-NiFe2O4 Composites: Effect of Phase Connectivity of the Constituent Phases, Presented at ICMAT-2017 ((18-23 June), Suntec City, Singapore; Symp: S) Spintronics and Magnetic Materials.

Paper Accepted for Publication• Sintered porous balls from rice husk for thermal insulation in iron and steel industries, Ritwik Sarkar and Megha Acharya,

Available online, Ironmaking and steelmaking.

• Formation of Mg2C3 phase in N220 Nanocarbon containing Low Carbon MgO-C Composition, Satyananda Behera and Ritwik Sarkar, Bulletin of Materials Science, Online available.

• High alumina castables: a comparison among various sol-gel bonding systems, Akhilesh K Singh and Ritwik Sarkar, Journal of the Australian Ceramic Society, Online available.

• Aiswarya Dash, Sumit K Pal, Indranil Banerjee, Subhabrata chakraborty, Rare-earth doped SiO2-CaF2 glass ceramic nano-particle with upconversion properties; International Journal of Applied Ceramic Technology , 2017.

• S. Adhikari, D. Sarkar, G. Madras, Hierarchical design of CuS architectures for visible light photocatalysis of 4-chlorophenol, ACS Omega, July 2017.

• P. Saha, P. H. Jampani, M. K. Datta, D. Hong, B. Gattu, P. Patel, K. Kadakia, A. Manivannan, and P. N. Kumta, A Rapid Solid-State Approach to Electrochemically Active Chevrel Phases (Mo6T8; T = S, Se) for Rechargeable Magnesium Batteries, Nano Research.

• “Microstructure and Electrical Properties of Porous BZT-0.5BCT ceramics: Effect of pore formers (PVA and PVP)” S. Abhinay, S. Bhukania, R. Mazumder, Ferroelectrics, (2017) Article in Press.

Books / Book Chapter• Ritwik Sarkar, Refractory Technology: Fundamentals and Applications, CRC Press, US, 2016. (www.crcpress.com/Refractory-

Technology-Fundamentals-and-Applications/Sarkar/p/book /9781498754255).

• S. Adhikari, A. K . Mishra, D. Sarkar, Ceramic based nanomaterials for multifunctional application’ in a book entitled ‘Smart Ceramics: Preparation, properties and applications’ published by Pan Stanford Publisher, Singapore. 2017, 3rd chapter. (https://www.crcpress.com/Smart-Ceramics-Preparation-Properties-and-Applications/ Mishra/p/book/9789814774307

• S. Adhikari, N. K. R. Eswar, A. K. Mishra, D. Sarkar, G. Madras, Functionally active nanomaterials for environmental remediation, in a book entitled ‘Nanotechnology in Environmental Science’ published by Wiley-VCH Publishers. Printing in progress.


52

Patent• Satyananda Behera and Ritwik Sarkar, Anti-oxidants in low carbon MgO-C refractory, Patent filed in India, Application No.

201631023920, dated 13.07.2016

• Rupita Ghosh and Ritwik Sarkar, Machinable tricalcium phosphate- lanthanum phosphate bioceramic composite for biomedical application, Patent filed in India, Application No. 2017631023920, dated 16.03.2017.

• D. Sarkar, B. Sambireddy, S. Mandal, B. Basu, “Patient specific near-net shaped uniaxially pressed femoral head and acetabular socket, and Fabrication method thereof”, European Patent, Application Number PCT/IB2017/050590, Dated 3rd February 2017.

Patent submitted in Institute for further processing• Self-adjustable multi-color emissions from single phase europium doped yttrium borate phosphor (Inventors: Shubham

Srivastava, Bihbuti Bhusan Nayak and Shantanu Kumar Behera).

• Tunable emission colors from single phase terbium doped yttrium borate phosphor (Inventors: Shubham Srivastava, Bihbuti Bhusan Nayak and Shantanu Kumar Behera)


By Faculty:• Dr. Ritwik Sarkar is working as Asst Editor, IRMA (Indian Refractory Makers Association) Journal.

• Dr. Ritwik Sarkar represented the Council as Member of Indian Institute of Ceramics.

• Dr. Ritwik Sarkar worked as Member, Examination Committee & Publication Committee, Indian Inst. of Ceramics.

By Students:• D. Soumya (Ph D scholar) received the Third Best Poster Paper Award for her Poster Paper “Fabrication of Porous Alumina

using a Natural Foaming Agent” in the 80th Annual Session of Indian Ceramic Society held during December 12-16, 2016 at Hyderabad.


SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Prof. Sudip Dasgupta attended Workshop- “Challenges and Opportunities in Bioceramic Materials for Orthopedic and Dental

Application (COBMODA- 2016)”- Organizer and Convener-Prof. Sudip Dasgupta.

• Prof. Sudip Dasgupta attended Workshop- “Hydroxyapatite for Orthopedics & Dental Implants by Ion Implantation Method (HODIIIM- 2016)”- Participated as invited delegate and presenter.

• Prof. R. Mazumdar Presented in 2nd Workshop on Lithium Ceramics for Tritium Breeding (LCTB-2016) R.Mazumder, G.Jayarao, “Development of Li4SiO4 Ceramics for Test Blanket Module: Addressing Some Critical Issues from Powder Synthesis to Pebble Fabrication” held at IIT Madras, during 23-24, August 2016.


53


AgencyName of the PI / Co-PI



Borohydride synthesis and photoluminescence properties of lanthanide ions doped and co-doped YBO3 phosphor nanomaterials

CSIR Dr. B. B. Nayak ~ 10 Jan 2015 Dec 2017

Fabrication of porous and hollow metal oxide nanostructured materials via gas bubbles template method for different applications

Nano mission, DST

Dr. B. B. Nayak ~ 51 March 2016 March 2019

Development of functionally graded bioglass ceramic scaffold for bone tissue engineering

DST-SERB Dr. S. K. Pal 70 (approved)

Manufacturing of patient-specific Zirconia toughened Alumina based femoral ball head prototype development DBT, India Dr. D. Sarkar 52.37 Dec 2015 Dec 2020Corrosion behavior of novel Mg- 4wt. % Y- 4wt. % Zn – 0.2wt. % Ca- 0.5 wt. % Zr alloys DST–SERB

(ECRA)Dr. P. Saha 53 Oct 2016 Oct 2019

Synthesis of surface modified ceramic adsorbent for deflurination of drinking water

DST-SERB Dr. (Mrs) S. Bhattacharyya

20.36 31-03-2016 30-03-2019

Injectable and Photocurable Alginate-Hydroxyapatite Paste for Bone Regeneration

CSIR Dr. Sudip Dasgupta 22 03-03-2016 03-03-2019

Injectable Nanocrystalline Hydroxyapatite-Polyanhydride Based Paste for Bone substitution DBT Dr. Sudip Dasgupta 45 15-03-2017 15-03-2020“Fabrication of Li4SiO4 pebbles with optimized strength and porosity by Extrusion-Spherodization technique” PFRC, BRNS S. Bhattacharyya

and R. Mazumder11.59 Aug 2016 Jan 2018

CONSULTANCY SERVICESSponsors Address Title of the Project Faculty

Tata Steel, Jamshedpur Corrosion Kinetics and Atmospheric Influence on Thermo-Mechanical behavior of Nonoxide Refractories

Dr. D. Sarkar


Name of the Project






54


Mr. Nadiya Bihary Nayak Borohydride synthesis for development of porous zirconium oxide nanopowders for novel applications

Dr. Bibhuti Bhusan Nayak

Kanchan Maji Gelatin Chitosan and Bioactive Nanoceramic Based Composite Scaffold for Orthopaedic Application

Dr. Sudip Dasgupta

Mr. Akhilesh Kumar Singh Study on the effect of different sols on high alumina refractory castable

Dr. Ritwik Sarkar


Mr. Sanjay Krishna Mohan Densification and Characterization of Magnesium Aluminate Spinel from Commercial Grade Reactants: Effect of Milling and Additives.

Dr. Ritwik Sarkar

Mr. Ezhil Venuswaran R. R Development of Porosity Gradient Bioglass Ceramic Scaffold Dr. S.K. Pal

K Sarath Chnadra Processing and Properties of Polycrystalline Nd:YAG Ceramics Debasish Sarkar

Department of COMPUTER SCIENCE & ENGINEERING


93 | P a g e





90

62

23

8

0

10

20

30

40

50

60

70

80

90

100

B.Tech. M.Tech. M.Tech Dual ( 5 Years) Ph.D.

326

120 109

0

50

100

150

200

250

300

350

B.Tech M.Tech (2 Years) M.Tech Dual ( 5 Years)


55


93 | P a g e





90

62

23

8

0

10

20

30

40

50

60

70

80

90

100

B.Tech. M.Tech. M.Tech Dual ( 5 Years) Ph.D.

326

120 109

0

50

100

150

200

250

300

350

B.Tech M.Tech (2 Years) M.Tech Dual ( 5 Years)


94 | P a g e

FACULTY

SL Name & Specialization

1Prof. Santanu Kumar Rath ([email protected])Professor & HOD, Ph.D. (IIT Kharagpur)Software Engineering, Data Mining, Bio-informatics, IT Strategy

2Prof. Banshidhar Majhi ([email protected])Professor, Ph.D.(CSE)Image Processing, Data Compression, Cryptography and Security, Soft Computing

3

Prof. Durga Prasad Mohapatra ([email protected])Associate Professor, Ph.D.(IIT Kharagpur)Software Engineering, Programme Slicing, Software Testing, Distributed Systems, Real-time Systems

4Prof. Suchismita Chinara ([email protected])Assistant professor, Ph.D. (NIT Rourkela)Wired and Wireless Computer Networks, Data Communications

5Prof. Pankaj Kumar Sa ([email protected])Assistant Professor, Ph.D. (NIT Rourkela)Image Processing, Graphics, Computer Vision

6Prof. Ashok Kumar Turuk ([email protected])Associate Professor, Ph.D. (IIT Kharagpur)Optical Network, Wireless Network, Network Security, Mobile Computing, Embedded Systems

7Prof. Bibhudatta Sahoo ([email protected])Assistant Professor, Ph.D.(NIT Rourkela)Data Structure & Algorithm Design, Parallel & Distributed Systems

8Prof. Pabitra Mohan Khilar ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Parallel & Distributed Processing, Fault-tolerant Computing, Cluster and Grid Computing, Wireless Ad-hoc Networks

3

6

12 2

3

5

12

12

1 1 12

4

1

8

3

1

5

23

43

4

21

14

4 4

1 1

7

12

0

2

4

6

8

10

12

14

16

Amazon Cerner Dolcera ITES Itron SandipUniversity

UnitedHealthGroup

FACULTYSL Name & Specialization1 Prof. Santanu Kumar Rath ([email protected])

Professor & HOD, Ph.D. (IIT Kharagpur)Software Engineering, Data Mining, Bio-informatics, IT Strategy

2 Prof. Banshidhar Majhi ([email protected])Professor, Ph.D.(CSE)Image Processing, Data Compression, Cryptography and Security, Soft Computing

3 Prof. Durga Prasad Mohapatra ([email protected])Associate Professor, Ph.D.(IIT Kharagpur)Software Engineering, Programme Slicing, Software Testing, Distributed Systems, Real-time Systems

4 Prof. Suchismita Chinara ([email protected])Assistant professor, Ph.D. (NIT Rourkela)Wired and Wireless Computer Networks, Data Communications

5 Prof. Pankaj Kumar Sa ([email protected])Assistant Professor, Ph.D. (NIT Rourkela)Image Processing, Graphics, Computer Vision

6 Prof. Ashok Kumar Turuk ([email protected])Associate Professor, Ph.D. (IIT Kharagpur)Optical Network, Wireless Network, Network Security, Mobile Computing, Embedded Systems

7 Prof. Bibhudatta Sahoo ([email protected])Assistant Professor, Ph.D.(NIT Rourkela)Data Structure & Algorithm Design, Parallel & Distributed Systems


56

SL Name & Specialization8 Prof. Pabitra Mohan Khilar ([email protected])

Assistant Professor, Ph.D. (IIT Kharagpur)Parallel & Distributed Processing, Fault-tolerant Computing, Cluster and Grid Computing, Wireless Ad-hoc Networks

9 Prof. Ramesh Kumar Mohapatra ([email protected])Assistant Professor, M.Tech. (NIT Rourkela)Automata Theory, Compiler Design, Optical Character Recognition, Cryptography

10 Prof. Sujata Mohanty ([email protected])Assistant Professor, Ph.D. (NIT Rourkela)Cryptography, Information Security

11 Prof. Korra Sathyababu ([email protected])Assistant Professor, Ph.D, M.Tech. (NIT Rourkela)Data Engineering, Privacy, Social Computing

12 Prof. Manmath Narayan Sahoo ([email protected])Assistant professor, M.Tech.(NIT Rourkela)Fault Tolerant Systems, Distributed Systems, Computer Networks

13 Prof. Ratnakar Dash ([email protected])Assistant Professor, Ph.D. (NIT Rourkela)Signal Processing, Image Processing

14 Prof. Bidyut Kumar Patra ([email protected])Assistant Professor, Ph.D. (IIT Guwahati)Data Mining, Pattern Recognition

15 Prof. Ruchira Naskar ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Digital Forensics, Multimedia Security, Cryptography

16 Prof. Sambit Bakshi ([email protected])Assistant Professor, Ph.D. (NIT Rourkela)Image Processing, Computer Vision, Surveillance Systems

17 Prof. Anup Nandy ([email protected])Assistant Professor, B.Tech(WBUT), M.Tech (IIIT Allahabad)Pattern Recognition, Soft Computing, Robotics, Biological Motion Analysis

18 Prof. Sumanta Pyne ([email protected])Assistant Professor, ME, (BESU Shibpur)Low Power VLSI, Computer Networks

PUBLICATION

Publications in Journals• Alekha Kumar Mishra, Asis Kumar Tripathy, Arun Kumar, and Ashok Kumar Turuk, “A Replica Detection Scheme Based on

the Deviation in Distance Traveled Sliding Window for Wireless Sensor Networks,” Wireless Communications and Mobile Computing, Volume 2017, 2017.

• Niranjan Kumar Ray, Ashok Kumar Turuk, “A framework for post-disaster communication using wireless ad hoc networks,” INTEGRATION the VLSI journal, Volume 58, 2017, Pages 274-285.

• Niranjan Kumar Ray and Ashok Kumar Turuk, “A Hybrid Energy Efficient Protocol for Mobile Ad Hoc Networks,” Journal of Computer Networks and Communications, Volume 2016, 2016.

• A. Nandy, R. Chakraborty, P. Chakraborty, “Cloth invariant gait recognition using pooled segmented statistical features”, vol.191, pp. 117-140, Neurocomputing, 2016.

• Nandy, A. Pathak, P. Chakraborty, “A study on gait entropy image analysis for clothing invariant human identification”, Multimedia Tools and Applications, vol. 76, no. 7, pp. 9133-9167, 2017.

• Sambit Kumar Mishra, Ranith Sardar, Bibhudatta Sahoo, and Sanjay Kumar Jena. “Optimizing Execution Delay in Mobile Cloud Computing.” International Journal of Control Theory and Applications, Vol. 9, No. 40, pp. 237-245, 2017.

• Mayank Tiwary, Kshira Sagar Sahoo, Bibhudatta Sahoo, and Rachita Misra, “CPS: a dynamic and distributed pricing policy in cyber foraging systems for fixed state cloudlets,” Computing, 2017, Vol. 99, No. 5, pp. 447-463.

• Kshira Sagar Sahoo, Bibhudatta Sahoo, Ratnakar Dash, and Brojo Kishor Mishra, “Improving Resiliency in SDN using Routing Tree Algorithms,” International Journal of Knowledge Discovery in Bioinformatics, 2017, Vol. 7, No. 1, pp. 42-57.


57

• Pramit Mazumdar, Bidyut Kr. Patra, Russell Lock, and Korra Sathya Babu, “An Approach to Compute User Similarity for GPS Applications,” Knowledge-Based System, Vol. 113, 2016, Pages 125–142.

• J. Singh, P. M. Khilar, D. P. Mohapatra, “Dynamic slicing of distributed Aspect-Oriented Programs: A context-sensitive approach,” Computer Standards & Interfaces, Vol. 52, 2017, pp.71-84.

• M. Sahu, D. P. Mohapatra, “Computing Dynamic Slices of Feature-Oriented Programs using Execution Trace File,” ACM SIGSOFT Software Engineering Notes, Vol. 42, No. 2, 2016, pp. 1-16.

• M. Sahu, D. P. Mohapatra, “Forward Dynamic Slicing of Web Applications,” ACM SIGSOFT Software Engineering Notes, Vol. 41, No. 3, 2016, pp. 1-7.

• S. Godboley, A. Dutta, D. P. Mohapatra, R. Mall, “J3 Model: A novel framework for improved Modified Condition/Decision Coverage analysis,” Computer Standards & Interfaces, Vol. 50, 2016, pp. 1-17.

• Deepak Ranjan Nayak, Ratnakar Dash, Banshidhar Majhi, and Pankaj K. Sa, “Pathological Brain Detection Systems: A Review,” CSI Communication, Vol. 40, No. 6, 2016, pp.13-16.

• Deepasikha Mishra, Banshidhar Majhi, Pankaj Kumar Sa, and Ratnakar Dash, “Development of robust neighbor embedding based super-resolution scheme,” Neurocomputing, Vol. 202, 2016, pp. 49-66.

• Siddhartha Narayana, Ram Prasad Padhy, Suman Kumar Choudhury, and Pankaj K. Sa, “Autonomic unmanned aerial vehicles: A computer vision perspective,” CSI Communications, Vol. 40, No. 4, 2016, pp. 14-18.

• Ansuman Mahapatra, Pankaj K. Sa, Banshidhar Majhi, and Sudarshan Padhy, “MVS: A multi-view video synopsis framework,” Signal Processing: Image Communication, Vol. 42, 2016, pp. 31-44.

• Rahul Raman, Pankaj K. Sa, and Banshidhar Majhi, “Direction prediction for avoiding occlusion in visual surveillance,” Innovations in Systems and Software Engineering, Vol. 12, No. 3, 2016, pp. 201-214.

• Sonali Mishra, Banshidhar Majhi, Pankaj Kumar Sa, and Lokesh Sharma, “Gray level co-occurrence matrix and random forest based acute lymphoblastic leukemia detection,” Biomedical Signal Processing and Control, Vol. 33, 2017, pp. 272-280.

• Aparajita Nanda, Pankaj Kumar Sa, and Suman Kumar Choudhury, “An unsupervised meta-graph clustering based prototype-specific feature quantification for human re-identification in video surveillance,” Engineering Science and Technology, an International Journal, Vol. 20, No. 3, 2017, pp. 1041-1053.

• A. Nanda, P.K. Sa, S.K. Choudhury, S. Bakshi, and B. Majhi, “A Neuromorphic Person Re-Identification Framework for Video Surveillance,” IEEE Access, Vol. 5, No. 1, 2017, pp. 6471-6482.

• J.K. Rout, A. Dalmia, K.-K.R. Choo, S. Bakshi, and S.K. Jena, “Revisiting Semi-supervised Learning for Online Deceptive Review Detection,” IEEE Access, Vol. 5, No. 1, 2017, pp. 1319 – 1327.

• R. Raman, P.K. Sa, S. Bakshi, and Banshidhar Majhi, “Direction Estimation for Pedestrian Monitoring System in Smart Cities: An HMM Based Approach,” IEEE Access, Vol. 4, No. 1, 2016, pp. 5788 – 5808.

• S.K. Choudhury, P.K. Sa, B. Majhi, and S. Bakshi, “An evaluation of background subtraction for object detection vis-a-vis mitigating challenging scenarios,” IEEE Access, Vol. 4, No. 1, 2016, pp. 6133 – 6150.

• J. Rout, S. Singh, S.K. Jena, and S. Bakshi, “Deceptive Review Detection Using Labeled and Unlabeled Data,” Multimedia Tools and Applications, Vol. 76, 2017, pp. 3187–3211.

• R. Raman, P.K. Sa, B. Majhi, S. Bakshi, “Acquisition and corpus description of NITR conscious walk dataset,” ACM SIGBioinformatics Record, Vol. 7, No. 1, 2017, pp. 1.

• R. Raman, P.K. Sa, B. Majhi, S. Bakshi, “Acquisition and corpus description of a constrained lip database captured from handheld devices: NITRLipV2 (MobioLip),” ACM SIGBioinformatics Record, Vol. 7, No. 1, 2017, pp. 2.

• R.R. Swain and P.M. Khilar, “Composite Fault Diagnosis in Wireless Sensor Networks Using Neural Networks,” Wireless Personal Communications, Vol. 95, No. 3, 2016, pp. 2507–2548, 2017, Springer.

• S.K. Bhoi and P.M. Khilar, “VehiHealth: An Emergency Routing Protocol for Vehicular Adhoc Network to support Health Care System,” Journal of Medical Systems, Vol. 40, No. 3, 2016, pp. 1-12.

• N. Panigrahi and P.M. Khilar, “Multi-hop consensus time synchronization algorithm for sparse wireless sensor network: A distributed constraint-based dynamic programming approach,” Adhoc Networks, Vol. 61, 2017, pp. 124-138.

• M. Singh and P.M. Khilar, “Mobile Beacon Based Range Free Localization Method for Wireless Sensor Networks,” International Journal of Wireless Networks, Vol. 23, No. 4, 2017, pp. 1285-1300, Springer

• R.R. Swain, T. Dash, and P.M. Khilar, “An Effective graph-theoretic Approach Towards Simultaneous Detection of Faults and Cuts in Wireless Sensor Networks,” International Journal of Communication Systems, Vol. 30, No. 13, 2017, pp. 1-19.

• N. Panigrahi and P.M. Khilar, “Energy Consumption Analysis of Consensus Time Synchronization Algorithms for Wireless Sensor Networks,” International Journal of Wireless Communications, Vol. 2, No. 2, 2017.


58

• Deepak Ranjan Nayak, Ratnakar Dash, Banshidhar Majhi, “Stationary wavelet transform and AdaBoost with SVM based pathological brain detection in MRI scanning,” CNS & Neurological Disorders-Drug Targets, Vol. 16, No. 2, 2017, pp.137-149.

• Deepak Ranjan Nayak, Ratnakar Dash, Banshidhar Majhi, Vijendra Prasad, “Automated pathological brain detection system: A fast discrete curvelet transform and probabilistic neural network based approach,” Expert Systems With Applications, Vol. 88, 2017, pp. 152-164.

• Ramesh Kumar Mohapatra, Banshidhar Majhi and Sanjay Kumar Jena. “Two-stage classification approach for the recognition of handwritten atomic Odia character.” International Journal of Applied Pattern Recognition, Vol. 4, No. 1, 2017.

• R. Dixit, R. Naskar and S. Mishra, “A blur-invariant copy-move forgery detection technique with improved detection accuracy utilizing SWT-SVD”, IET Image Processing, Vol. 11, No. 5, 2017, pp. 301 – 309.

• Sandipan Basu, Mahasweta Sarkar, Santosh Nagaraj, and Suchismita Chinara, “A survey on ultra wideband and ultrasonic communication for body area network,” International Journal of Ultra Wideband Communications and Systems, Vol 3, issue 3, 2016.

• Lov Kumar and Santanu Kumar Rath, “An Empirical Analysis of the Effectiveness of Software Metrics and Fault Prediction Model for Identifying Faulty Classes,” Computer Standards & Interfaces, Vol 53, 2017, pp. 1-32.

• Lov Kumar, Mukesh Kumar, and Santanu Kumar Rath, “Maintainability prediction of web service using support vector machine with various kernel methods,” International Journal of System Assurance Engineering and Management, Vol. 8, No. 2, 2017, pp. 205–222.

• Lov Kumar, Aneesh Krishna, and Santanu Kumar Rath, “The impact of feature selection on maintainability prediction of service-oriented applications,” Service Oriented Computing and Applications, Vol. 11, No. 2, 2017, pp. 137–161.

• Tripathy Abinash, Ankit Agrawal, and Santanu Kumar Rath, “Classification of sentiment reviews using n-gram machine learning approach,” Expert Systems with Applications, Vol. 57, 2016, pp. 117-126.

• Mukesh Kumar, Nitish Kumar Rath, and Santanu Kumar Rath 2016. “Analysis of microarray leukemia data using an efficient MapReduce-based K-nearest-neighbor classifier,” Journal of Biomedical Informatics, Vol. 60 ,2016, pp. 395-409.

• Lov Kumar and Santanu Kumar Rath, “Hybrid Functional Link Artificial Neural Network Approach for Predicting Maintainability of Object-Oriented Software,” Journal of System and Software, Vol. 121, 2016.

• Rohit Kumar Das, Sanjeet Kumar Nayak, Sourav Kumar Bhoi, Suman Kumar Choudhury, Banshidhar Majhi, and Sujata Mohanty, “BSEA: A Blind Sealed-Bid E-Auction Scheme for E-Commerce Applications,” Computers, Vol. 5, 2016.

• Susmita Mandal, Sujata Mohanty, and Banshidhar Majhi, “An ID-based authenticated three-party key exchange protocol,” ACCENTS Transactions on Information Security, Vol. 2, No. 7, 2017, pp. 2455-7196.

Publications in Conferences• Ranjita Kumari Dash, Jose´ L. Risco-Mart´ın , Ashok Kumar Turuk , Jose´ L. Ayala, A Thermal Driven Genetic Algorithm for

Three Dimensional Network-on-Chip Systems, 48th Proceedings of the Summer Computer Simulation Conference, SCSC ’16, Montreal, Quebec, Canada, pp. 47:1 – 47:8, July 24-27, 2016.

• Ranjita Kumari Dash, Jose´ L. Risco-Mart´ın, Ashok Kumar Turuk , Jose´ L. Ayala, Bio-inspired thermal management techniques for three dimensional heterogeneous stacked network-on-chip systems, BioSMART 2016, Dubai, United Arab Emirates, 4-7 Dec. 2016.

• P. Maiti, S. K. Addya, B. Sahoo, and A. K. Turuk ,“Energy Efficient Wireless Body Area Network WBAN),” Handbook of Research on Advanced Wireless Sensor Network Applications, Protocols, and Architectures, IGI Global, pp. 413-432, 2016.

• P. Maiti, B. Sahoo, and A. K. Turuk, “Service oriented fault monitoring in Internet of Things device management, ”IEEE International Conference on Signal Processing ,Communication, Power and Embedded System (SCOPES-2016), pp. 243-248 , 2016.

• P. Maiti, B. Sahoo, A.K. Turuk, and S. Satpathy, “Sensors Data Collection Architecture in the Internet of Mobile Things as a Service (IoMTaaS) Platform,” IEEE International conference on I-SMAC (IoT in Social, Mobile, Analytics and Cloud), 2017.

• Kshira Sagar Sahoo, Bibhudatta Sahoo, Ratnakar Dash, and Mayank Tiwary, “Solving Multi-Controller Placement Problem in Software Defined Network,” 15th International Conference on Information Technology (ICIT), IEEE, 2016.

• Raj Kumar, Mayank Tiwary, Abhishek Singh, Kshira Sagar Sahoo, and Bibhudatt Sahoo, “Improving Quality of Services During Device Migration in Software Defined Network,” International Conference on Advanced Computing and Intelligent Engineering (ICACNI), Springer, 2016.

• Kshira Sagar Sahoo, Mayank Tiwary, Abhishek Singh, Bata Krishna Tripathy, and Bibhudatta Sahoo, “Load Prediction Mechanism for Layer 3 SDN Controllers,” 18th International Conference on Distributed Computing and Networking (ICDCN) Doctoral Symposium, ACM, 2017.


59

• Sambit Kumar Mishra, Kshira Sagar Sahoo, Bibhudatta Sahoo, and Sanjay Kumar Jena, “Metaheuristic Approaches to Task Consolidation Problem in the Cloud,” Resource Management and Efficiency in Cloud Computing Environments, pp. 168, 2016.

• Sambit Kumar Mishra, Priti Paramita Parida, Sampa Sahoo, Bibhudatta Sahoo, and Sanjay Kumar Jena, “Improving Energy Usage in Cloud Computing Using DVFS,” International conference on Advanced Computing and Intelligent Engineering (ICACIE), Springer, 2016.

• Sambit Kumar Mishra, Md. Akram Khan, Bibhudatta Sahoo, and Sanjay Kumar Jena, “Time Efficient Task Allocation in Cloud Computing Environment,” International Conference on Convergence of Technology (I2CT), IEEE, 2017.

• Sambit Kumar Mishra, Bibhudatta Sahoo, and Sanjay Kumar Jena, “A Secure VM Consolidation in Cloud Using Learning Automata,” 5th International Conference on Advanced Computing, Networking, and Informatics (ICACNI), Springer, 2017.

• Pramit Mazumdar, Bidyut Kr. Patra, and Korra Sathya Babu, “An Effective POI Recommendation in various Cold-start Scenarios,” The 22nd International Conference on Management of Data (COMAD), 2017.

• Rama Syamala Sreepada, Bidyut Kr. Patra, and Antonio Hernando, “Multi-criteria Recommendations through Preference Learning,” The 4th ACM IKDD Conference on Data Sciences (CoDS-2017), 2017.

• S. Godboley, A Dutta, A. Das, and D. P. Mohapatra, “Measuring MC/DC at Design Phase using UML Sequence Diagram and Concolic Testing,” 13th International IEEE India Conference (INDICON), 2016, pp. 1-6.

• A. Dutta, S. Godboley and D. P. Mohapatra, “Measuring Hit Ratio metric for SOA based Application using Black-box testing,” 3rd International Conference on Computational Intelligence in Data Mining (ICCIDM), 2016.

• M. Sahu and D. P. Mohapatra, “Interprocedural Conditioned Slicing,” 3rd International Conference on Computational Intelligence in Data Mining (ICCIDM-2016), Springer, 2016.

• M. Sahu and D. P. Mohapatra, “Relevant Slicing of feature-Oriented Programs,” 1st International Conference on Advanced Computing and Intelligent Engineering (ICACIE), Springer, 2016.

• S. Godboley, A Dutta, and D. P. Mohapatra, “Java-HCT: An approach to increase MC/DC using hybrid concolic testing for Java programs,” Federated Conference of Computer Science and Information Systems (FedCSIS-2016), IEEE, 2016, pp. 1709-1713.

• A. Dutta, S. Godboley and D. P. Mohapatra, “COLT: Extending CONCOLIC testing to measure LCSAJ Coverage,” IEEE Region 10 Conference (TENCON-2016), 2016, pp. 373-378.

• V. Panthi, and D. P. Mohapatra, “ACO based embedded system testing using UML Activity Diagram,” IEEE Region 10 Conference (TENCON-2016), 2016, pp. 237-242.

• P. Mahali, S. Arabinda, A.A. Acharya, and D. P. Mohapatra, “Test case generation for concurrent systems using UML activity diagram,” IEEE Region 10 Conference (TENCON-2016), 2016, pp. 428-435.

• R. Naidu, S.K. Bharti, K.S. Babu, R.K. Mohapatra, “Sentiment Analysis using Telugu SentiWordNet,” International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET), IEEE, 2017.

• R. Naidu, S.K. Bharti, K.S. Babu, R.K. Mohapatra, “Text Summarization with Automatic Keyword Extraction in Telugu e-Newspapers,” International Conference on Smart Computing and Informatics (SCI 2017), Springer, 2017.

• Anshuman Das Mohapatra and Manmath Narayan Sahoo, “Modelling of a Fibonacci Sequence 8-bit Current Steering DAC to Improve the Second Order Nonlinearities,” International Conference on Advanced Computing and Intelligent Engineering (ICACIE), 2016.

• C.R. Panigrahi, J.L. Sarkar, B. Pati, S. Bakshi, “E3M: An Energy Efficient Emergency Management System using mobile cloud computing,” IEEE International Conference on Advanced Networks and Telecommunications Systems (ANTS), 2016.

• Suman Kumar Choudhury, Pankaj Kumar Sa, Ram Prasad Padhy, and Banshidhar Majhi, “A denoising inspired deblurring framework for regularized image

• restoration,” IEEE Annual India Conference(INDICON), 2016, pp. 1-6.

• Deepasikha Mishra, Banshidhar Majhi, Pankaj Kumar Sa, “Improved Feature Selection for Neighbor Embedding Super-Resolution Using Zernike Moments,” International Conference on Computer Vision and Image Processing, 2017, pp.13-24.

• Sonali Mishra, Lokesh Sharma, Bansidhar Majhi, and Pankaj Kumar Sa, “Microscopic Image Classification Using DCT for the Detection of Acute Lymphoblastic Leukemia (ALL),” International Conference on Computer Vision and Image Processing, 2017, pp.171-180.

• Sonali Mishra, Bansidhar Majhi, and Pankaj Kumar Sa, “A survey on automated diagnosis on the detection of Leukemia: A hematological disorder,” International Conference on Recent Advances in Information Technology (RAIT), 2016, pp. 460-466.

• Aparajita Nanda, and Pankaj K. Sa, “Single-Shot Person Re-identification by Spectral Matching of Symmetry-Driven Local Features,” Advanced Computing and Systems for Security, 2017, pp. 147-159.


60

• Sonali Mishra, Banshidhar Majhi, Pankaj Kumar Sa, and Faiza Siddiqui, “GLRLM based Feature Extraction for Acute Lymphoblastic Leukemia(ALL) Detection,” International Conference on Advanced Computing, Networking, and Informatics (ICACNI), 2017, pp. 1-6.

• S.K.Bhoi, M.Singh and P.M.Khilar, “Predicting Link failure in Vehicular Communication System Using Link Existence Diagram (LED)”, Proceedings of International Conference on Advanced Computing, Networking, and Informatics (ICACNI), Springer, 2016.

• R.R. Swain, P.M.Khilar, “A Fuzzy MLP Approach for Fault Diagnosis in Wireless Sensor Networks,” In the proceedings of IEEE Region Ten Conference (TENCON), 2016.

• Dibyasundar Das, Ratnakar Dash, and Banshidhar Majhi. “Odia Compound Character Recognition Using Stroke Analysis.” Computational Intelligence in Data Mining. Springer, Singapore, 2017. Pp. 325-332.

• Reddy Naidu, Santosh Kumar Bharti, Korra Sathya Babu, Ramesh Kumar Mohapatra. Text Summarization with Automatic Keyword Extraction in Telugu e-Newspapers. In International Conference on Smart Computing and Informatics (SCI 2017), 2017.

• Reddy Naidu, Santosh Kumar Bharti, Korra Sathya Babu, Ramesh Kumar Mohapatra. Sentiment Analysis using Telugu SentiWordNet. In Proceedings of International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET), Chennai, IEEE, 2017.

• V.U. Sameer, R. Naskar, N. Muthsyala and K. Kalyan, “Deep Learning based Counter-Forensic Image Classification for Camera Model Identification”, 16th International Workshop on Digital Forensics and Watermarking (IWDW) 2017, Madgeburg, Germany.

• A. Roy, R. S. Chakraborty, V.U. Sameer and R. Naskar, “Camera Source Identification Using Discrete Cosine Transform Residue Features and Ensemble Classifier”, IEEE Conference on Computer Vision and Pattern Recognition Workshops (CVPRW) 2017, Honolulu, Hawai, USA.

• D. B. Tariang, A. Roy, R. S. Chakraborty and R. Naskar, “Automated JPEG Forgery Detection with Correlation based Localization”, IEEE International Conference on Multimedia and Expo (ICME) 2017, Hong Kong.

• N. N. Dafale and R. Naskar, “Sensor Pattern Noise based Source Anonymization”, IEEE Third International Conference on Sensing, Signal Processing and Security (ICSSS) 2017, Chennai, India.

• P. Sengupta, V.U. Sameer, R. Naskar and E. Kalaimannan, “Source Anonymization of Digital Images: A Counter–Forensic Attack on PRNU based Source Identification Techniques”, Annual Conference on Digital Forensics, Security and Law (ADFSL) 2017, Florida, USA.

• V.U. Sameer, A. Sarkar and R. Naskar, “Copy–Move Forgery Detection Exploiting Statistical Image Features”, 2017 IEEE International Conference on Wireless Communications Signal Processing and Networking (WisPNET 2017), Chennai, India.

• R. Dixit, R. Naskar and A. Sahoo, “Copy–Move Forgery Detection Exploiting Statistical Image Features”, 2017 IEEE International Conference on Wireless Communications Signal Processing and Networking (WisPNET 2017), Chennai, India.

• V.U. Sameer, Sugumaran S., R. Naskar, “Digital Forensic Source Camera Identification with Efficient Feature Selection using Filter, Wrapper and Hybrid Approaches”, 12th International Conference on Information Systems Security (ICISS 2016), Jaipur, India. Proceedings published in Lecture Notes in Computer Science, vol. 10063, pp. 409-425, 2016.

• Rohit Sahoo, Ashutosh Dwibedi, and Suchismita chinara, “Blended evaluation: A paradigm change in higher education by the use of ICT”, International Conference on Innovative Research in Computer Science, E-learning, Information and Communication Technology, pp. 178-181, 2016.

• Anurag Patra, Suchismita Chinara, and Manu Ellapila, “A Dynamic Contention MAC Protocol for Wireless Sensor Networks,” International Conference on High Performance control, Communication, and Computing, Malayasia, 2017.

• Nandanwar Chethan Damodar, Manu Elappila, Anurag Patro, Suchismita Chinara, “ENL-AODV: Energy and Load Based Routing Protocol in Ad-Hoc Networks,” International Conference on Optical & Wireless Technologies (OWT2017), Springer, 2017.

• Sujata Mohanty, SS Sahoo, and Banshidhar Majhi, Certificateless nominative signature scheme based upon DLP, International Conference on Electrical, Electronics, and Optimization Techniques, ICEEOT 2016, pp. 1241-1245.

Paper Accepted for Publication• Ranjita Kumari Dash, Jose´ L. Risco-Mart´ın, Ashok Kumar Turuk , Vinod Pangracious, Jose´ L. Ayala, Amartya Majumdar, “A

Bio-Inspired Hybrid Thermal Management Approach for Three-Dimensional Network-on-Chip Systems,” IEEE Transactions on NanoBioscience, 2017, In Press.

• Ravi Sanka Barpanda, Ashok Kumar Turuk, Bibhudatta Sahoo, “Analysis of wavelength reservation based quality of service differentiation in optical burst switching networks using Markov model,” Egyptian Informatics Journal, 2016, In Press.

• A. Nandy, P. Chakraborty, “A study on human gait dynamics: Modeling and Simulation on OpenSim Platform”, Multimedia Tools and Applications, 2016, Online.


61

• S. Godboley, A. Dutta, D. P. Mohapatra, R. Mall, “GECOJAP: A Modern Technique to Gear Coverage Criteria,” Computer Standards & Interfaces, Elsevier, 2017, In press.

• V. Panthi, D. P. Mohapatra, “An Approach for Web Application Testing using MBT,” International Journal System Assurance Engineering and Management, Springer, 2017, In press.

• V. Panthi, D. P. Mohapatra, “A Framework for Generating Prioritized Test Scenarios using Firefly Optimization,” International Journal of Computing Science & Mathematics, 2016, In press.

• R. Raman, S.K. Choudhury, and S. Bakshi, “Spatiotemporal Optical Blob Reconstruction for Object Detection in Grayscale Videos,” Multimedia Tools and Applications, Springer, 2016, In Press.

• S. Bakshi, P.K. Sa, H. Wang, S.S. Barpanda, and B. Majhi, “Fast Periocular Authentication in Handheld Devices with Reduced Phase Intensive Local Pattern,” Multimedia Tools and Applications, 2017, In Press.

• S.K. Choudhury, P.K. Sa, R.P. Padhy, S. Sharma, S. Bakshi, “Improved pedestrian detection using motion segmentation and silhouette orientation,” Multimedia Tools and Applications, 2017, In Press.

• A. Nanda, D.S. Chauhan, P.K. Sa, and S. Bakshi, “Illumination and scale invariant relevant visual features with hypergraph-based learning for multi-shot person re-identification,” Multimedia Tools and Applications, 2017, In Press.

• S. S. Barpanda, P. K. Sa, O. Marques, B. Majhi, and S. Bakshi, “Iris Recognition with Tunable Filter Bank Based Feature,” Multimedia Tools and Applications, 2017, In Press.

• J. K. Rout, K.-K. R. Choo, A. K. Dash, S. Bakshi, S. K. Jena, and K. L. Williams, “A Model for Sentiment and Emotion Analysis of Unstructured Social Media Text,” Electronic Commerce Research, 2017, In Press.

• S.K. Choudhury, P.K. Sa, K.-K.R. Choo, and S. Bakshi, “Segmenting foreground objects in a multi-modal background using modified Z-score,” Journal of Ambient Intelligence and Humanized Computing, 2017, DOI: 10.1007/s12652-017-0480-x.

• M.Singh, S.K. Bhoi and P.M.Khilar, “Omnidirectional Radio Propagation Antenna Using Organized Grouping of Monopole Antennas,” National Academy Science Letters, Springer, 2017.

• Deepak Ranjan Nayak, Ratnakar Dash, Banshidhar Majhi, “Pathological brain detection using curvelet features and least squares SVM,” Multimedia Tools and Applications, 2016.

• R. Dixit and R. Naskar, “Review, Analysis and Parameterization of Techniques for Copy-Move Forgery Detection in Digital Images”, IET Image Processing, 2017.

• Manu Elappila, Suchismita Chinara, Dayal Ramakrushna Parhi, “Survivable Path Routing in WSN for IoT applications”. Journal of Pervasive and Mobile Computing, 2017.

• Lov Kumar, Sai Kshna Sripada, Ashish Sureka, Santanu Kumar Rath, “Effective Fault prediction Model Developed Using Least Square Support Vector Machine (LSSVM),” Journal of System and Software, Elsevier, 2017.

• Ashish Kumar Dwivedi, Anand Tirkey, and Santanu Ku Rath, “Software Design Pattern Mining using Classification-based Techniques,” Frontiers of Computer Science, Springer, 2017.

• Lov Kumar and Santanu Kumar Rath, “Effective Fault Prediction Model Developed Using Extreme Learning Machine with Various Kernel Methods,” Journal of Frontiers of Information Technology & Electronic Engineering, 2017.

• Susmita Mandal, Sujata Mohanty, and Banshidhar Majhi, “Design of electronic payment system based on authenticated key exchange,” Electronic Commerce Research, 2016.

Books / Book Chapter• Ashok Kumar Turuk, Bibhudatta Sahoo, and Sourav Kanti Addya (Ed.), Resource Management and Efficiency in Cloud

Computing Environments, IGI Global, 2016.

• Niranjan Kumar Ray, and Ashok Kumar Turuk (Ed.), Handbook of Research on Advanced Wireless Sensor Network Applications, Protocols, and Architectures, IGI Global, 2016.

• Anamay Sarkar, Bibhudatta Sahoo, and Kshirasagar Sahoo, “Deployment of Controllers in Wide Area Software-Defined Networks,” LAP LAMBERT Academic Publishing, 2017.

• Devang Swami and Bibhudatta Sahoo, “Service Model for Big Data Applications in the Cloud,” LAP LAMBERT Academic Publishing, 2017.

• Pankaj K. Sa, Manmath N. Sahoo, M.Murugappan, Yulei Wu, and Banshidhar Majhi (Ed.), Progress in Intelligent Computing Techniques: Theory, Practice, and Applications : Proceedings of the 4th International Conference on Advanced Computing, Networking, and Informatics (ICACNI 2016), Advances in Intelligent Systems and Computing, Springer, 2017.


62

Patent


By Faculty:• Prof. Durga Prasad Mohapatra received Sandeep Mohapatra Memorial award for the year 2017, by Institution of Engineers

(India).

• Prof. S.K. Rath received Best Paper award at IEEE conference at BHU IIT Varanasi during 9th to 11th Dec. 2016 with his doctoral student Mr. Lov Kumar.

• Prof. S.K. Rath received Best Paper award at COSMAR 2016, IISC, Bangalore during 11th - 12th Nov. 2016, with his doctoral student Ms. Sukanya Panda.

• Prof. B. Majhi received Samanta Chandra Sekhar Award for the year 2016 from ODISHA BIGYAN ACADEMY.

By Students:• Sangharatna Godbole received Sandeep Mohapatra Memorial award for the year 2017, by Institution of Engineers (India).

• Arpita Dutta received Sandeep Mohapatra Memorial award for the year 2017, by Institution of Engineers (India).


SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• GIAN Course on Recommender System (December 5, 2016-December 14, 2016), Coordinator: Prof. Bidyut Kumar Patra.

RESEARCH PROJECTSName of the Project Sponsoring Agency Name of the PI Total Value


Human Cognitive State Estimation through Multi-modal Gait Analysis

SERB, Govt. of India

Dr. Anup Nandy 20.372 2017 2020

Slicing of Aspect-Oriented and Web-Based Applications

DST, Govt. of India Dr. D.P. Mohapatra 16.40 2012 2015

Designing of Mining Method, Strata Monitoring

SECL, Chhatisgarh Dr. S. JayantuDr. P.M. Khilar

Dr. L.P. Roy

12 2016 2018

Detection of Cyber Forgery in Multimedia Data through Blind Digital Forensics

YSS, BRNS Dr. R. Naskar 24 2016 2019

Digitization of steel microstructure images, modelling of plain carbon steel microstructure evolution during heat treatment using cellular automata and phase field modeling methods, and development of a software tool for providing guidance in designing heat treatment process using machine learning based classification techniques

ECR, SERB Dr. R. Naskar 20.832 2016 2019

Development of a Digital Forensic System for Blind Source Camera Identification of Contentious Images using Machine Learning

CSIR Dr. R. Naskar 6.582 2017 2020


63


INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCE Name of the Project Sponsoring Agency Name of the

CoordinatorTotal Value


EQUIPMENT ACQUIRED SL Name of the Equipment Amount (Rs. in Lakhs)

1 Microprocessor Kits 4.972 Communication Kits 6.54

LIST OF LABORATORIESSL Name of the Laboratories1 Network Security Laboratory2 Advanced Software Engineering 3 Information Security4 Computer Vision Laboratory5 Microprocessor Laboratory6 Communication Laboratory7 Embedded Systems and Robotics Laboratory8 Computing Laboratory - I9 Computing Laboratory - II10 Computing Laboratory - III11 Parallel and Distributed Computing Laboratory12 Distributed Object Systems Laboratory13 FIST Laboratory14 Advanced Networking Laboratory15 Pattern Recognition Laboratory16 Recommender Systems and Information Filtering Laboratory17 Visual Surveillance Research Laboratory18 Wireless Networks and Computing Laboratory19 Machine Intelligence and Biomotion Laboratory20 Cloud Computing Laboratory21 Knowledge and Data Engineering Laboratory22 Secured Computing & Advanced Machine Learning Laboratory23 Cryptography Laboratory24 Energy Efficient Computing Laboratory25 Digital Forensic Laboratory


64


Sashank Mouli Effort Estimation methods in software development using machine learning algorithms

Prof. S. K. Rath

Abhinash Tripathy Sentiment Analysis using Machine Learning Techniques Prof. S. K. Rath

Mukesh Kumar Analysis of Microarray Data Using Machine Learning Techniques on Scalable Platform

Prof. S. K. Rath

Jagannath Singh Slicing of Aspect-Oriented Programs and Its Application to Code Refactoring

Prof. D.P. Mohapatra

Saurabh K. Bhoi Path Selection Based Routing Protocols for Urban Vehicular Adhoc Networks

Prof. P.M. Khilar

Munesh Singh Geometric Constraint Based Range Free Localization Scheme For Wireless Sensor Networks

Prof. P.M. Khilar

Niranjan Panigrahi Consensus-based Time Synchronization in Algorithms for Wireless Sensor Networks With Topological Optimization Strategies for Performance Improvement

Prof. P.M. Khilar

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENT Name of the Student Title of Thesis Supervisor

Department of CHEMISTRY


111 | P a g e





25

14

17

0

5

10

15

20

25

30

M.Sc. ( 2 Years) Int. M.Sc. (5 Years) Ph.D.

49

105

0

20

40

60

80

100

120

M.Sc. ( 2 Years) Int. M.Sc. (5 Years)


65


111 | P a g e





25

14

17

0

5

10

15

20

25

30

M.Sc. ( 2 Years) Int. M.Sc. (5 Years) Ph.D.

49

105

0

20

40

60

80

100

120



112 | P a g e

FACULTY

SL Name & Specialization1 Prof. Raj Kishore Patel ([email protected])

Associate Professor, Ph. D. (Sambalpur University)Organic & Environmental Chemistry.

2 Prof. Braja Gopal Mishra ([email protected])Associate Professor, Ph. D. (IIT, Madras)Physical Chemistry

3 Prof. Saurav Chatterjee ([email protected])Associate Professor, Ph. D. (IIT, Bombay)Organometallic Chemistry

4 Prof. Rupam Dinda ([email protected])Associate Professor, Ph. D. (IACS Kolkata)Bioinorganic Chemistry

5 Prof. Niranjan Panda ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Organic Chemistry

6 Prof. Garudadhwaj Hota ([email protected])Associate Professor, Ph. D. (IIT, Mumbai)Material Chemistry

7 Prof. (Ms.) Aparna Mondal ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Materials Chemistry, Inorganic Chemistry

8 Prof. (Ms.) Sabita Patel ([email protected])Assistant Professor, Ph. D. (Sambalpur University)Organic Reaction Mechanism, Physical-organic Chemistry

9 Prof. (Ms.) Sasmita Mohapatra ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Materials Chemistry

10 Prof. (Ms.) Usharani Subuddhi ([email protected])Assistant Professor, Ph. D. (IIT, Madras)Physical Chemistry

11 Prof. Supratim Giri ([email protected])Assistant Professor, Ph. D. (Iowa State University, USA)

1

2

1 1

0

0.5

1

1.5

2

2.5

Aakash Institute Chinmaya Vidyalaya iBooks Sandip University

FACULTYSL Name & Specialization1 Prof. Raj Kishore Patel ([email protected])

Associate Professor, Ph. D. (Sambalpur University)Organic & Environmental Chemistry.

2 Prof. Braja Gopal Mishra ([email protected])Associate Professor, Ph. D. (IIT, Madras)Physical Chemistry

3 Prof. Saurav Chatterjee ([email protected])Associate Professor, Ph. D. (IIT, Bombay)Organometallic Chemistry

4 Prof. Rupam Dinda ([email protected])Associate Professor, Ph. D. (IACS Kolkata)Bioinorganic Chemistry

5 Prof. Niranjan Panda ([email protected])Associate Professor, Ph. D. (IIT, Kharagpur)Organic Chemistry


66

SL Name & Specialization6 Prof. Garudadhwaj Hota ([email protected])

Associate Professor, Ph. D. (IIT, Mumbai)Material Chemistry

7 Prof. (Ms.) Aparna Mondal ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Materials Chemistry, Inorganic Chemistry

8 Prof. (Ms.) Sabita Patel ([email protected])Assistant Professor, Ph. D. (Sambalpur University)Organic Reaction Mechanism, Physical-organic Chemistry

9 Prof. (Ms.) Sasmita Mohapatra ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Materials Chemistry

10 Prof. (Ms.) Usharani Subuddhi ([email protected])Assistant Professor, Ph. D. (IIT, Madras)Physical Chemistry

11 Prof. Supratim Giri ([email protected])Assistant Professor, Ph. D. (Iowa State University, USA)Physical Chemistry

12 Prof. Priyabrat Dash ([email protected])Assistant Professor, Ph. D. (University of Sakatchewan, Canada)Materials Chemistry/Nano Chemistry

13 Prof. Debayan Sarkar ([email protected])Assistant Professor, Ph. D. (IACS, Kolkata) Organic Synthesis and Catalysis

14 Prof. V. Siva Kumar ([email protected])Assistant Professor, Ph. D. (IIT, Madras)Inorganic Chemistry

15 Prof. Harekrishna Sahoo ([email protected])Assistant Professor, M.Sc, M.Tech, Ph. D. (Germany)Physical Chemistry

16 Prof. (Ms.) Madhurima Jana ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Computational Biophysical Chemistry

17 Prof. Jaya Prakash Madda ([email protected])Assistant Professor, Ph. D. ( University of Hyderabad)Materials Chemistry

18 Prof. Sarojlochan Samal ([email protected])Assistant Professor, Ph. D. (IIT, Delhi)Solid State and Materials Chemistry

19 Prof. Rabindra Kumar Behera ([email protected])Assistant Professor, Ph. D. (TIFR, Mumbai)Bio-inorganic Chemistry

20 Prof. Gokarneswar Sahoo ([email protected])Assistant Professor, Ph. D.Organocatalysis, Natura Product Synthesis

21 Prof. Arunabha Thakur ([email protected])Inspire Faculty, Ph. D. (IIT, Madras)Organometallic Chemistry

22 Prof. Santanab Giri ([email protected])Inspire Faculty, Ph. D. (IIT, Kharagpur)Theoretical Computational Chemistry, Metal Cluster, Cluster Assembly, Superatom


67

PUBLICATION

Publications in Journals• A. Baral, L. Satish, D. Dash, H. Sahoo*, and M. Ghosh, Construing the interactions between MnO2 nanoparticle and Bovine

serum albumin: Insight into the structure and stability of protein-nanoparticle conjugate, New Journal of Chemistry 2017, Accepted.

• L. Satish, S. Millan, S. Das, S. Jena and H. Sahoo*, Thermal aggregation of Bovine serum albumin in conventional buffers: An Insight into molecular level interactions, Journal of Solution Chemistry, 2017, 46(4), 831-848.

• S. Millan, L. Satish, K. Bera, B. Susrisweta, DV Singh, and H. Sahoo*, A Spectroscopic and Molecular simulation approach towards the binding affinity between Lysozyme and Phenazinium dyes: An effect on protein conformation, The Journal of Physical Chemistry B, 2017, 121(7), 1474-1485.

• J. Shakya, H. Sahoo and T. Mohanty, A study on the interaction between molybdenum disulfide and rhodamine B by spectroscopic methods, Journal of Materials Science, 2017, 52, 3831-3840.

• Satish, S. Millan, and H. Sahoo*, Spectroscopic Insight into the Interaction of Bovine Serum Albumin with Imidazolium-Based Ionic Liquids in Aqueous Solution, Luminescence, 2016, doi: 10.1002/bio.3239.

• A. S. Patel, H. Sahoo& T. Mohanty, Investigating the energy transfer from dye molecules to DNA stabilized Au Nanoparticles, Journal of Fluorescence, 2016, 26, 1849-1855.

• N. Panda, S.A. Yadav, S. Giri “Palladium-Catalyzed oxidative Sulfamidation: A Stereoselective Synthesis for Enesulfonamides”, Adv. Synth. Catal., Vol. 359, pp. 654-662.

• L. Rout, A. Kumar, R. S. Dhaka, G.N. Reddy, S. Giri, P. Dash* “Bimetallic Au-Cu Alloy Nanoparticles on Reduced Graphene Oxide Support: Synthesis, Catalytic Activity and Investigation of Synergistic Effect by DFT Analysis, Appl. Catal. A: General, 538, 107, 2017 (IF: 4.339).

• B. Ekka, R. S. Dhaka, R. K. Patel*, P. Dash* “Fluoride Removal in Waters using Ionic Liquid-Functionalized Alumina as a Novel Adsorbent”, J. Cleaner Prod., 151, 303, 2017. (IF: 5.715)

• A. Kumar, L. Rout, L. S. K. Achary, R. S. Dhaka, P. Dash* “Greener Route for Synthesis of aryl and alkyl-14H-dibenzo [a.j] xanthenes using Graphene Oxide-Copper Ferrite Nanocomposite as a Recyclable Heterogeneous Catalyst”, Sci. Rep., 2017, 7, 42975. (IF: 5.228).

• S. A. Pappus, B. Ekka, S. Sahu, D. Sabat, P. Dash, M. Mishra* “A toxicity assessment of Hydroxyapatite nanoparticles on development and behavior of Drosophila melanogaster, J. Nanopart. Res., 2017, 19 (4), 136. (IF: 2.020)

• S.Dhal, A.Mohanty, I.Yadav, K. Uvanesh, S Kulanthaivel, I.Banerjee, K Pal, S.Giri, Magnetic nanoparticle incorporated oleogel as iontophoretic drug delivery system. Colloids and Surfaces B: Biointerfaces, 157 (2017), 118-129 (Impact factor: 3.88).

• S. Kulanthaivel, S. Rathnam V. S., T. Agarwal, S. Pradhan, K. Pal, S. Giri, T. K. Maiti and I. Banerjee, Gum tragacanth–alginate beads as proangiogenic–osteogenic cell encapsulation systems for bone tissue engineering, J. Mater. Chem. B, 5 (2017), 4177 (Impact factor: 4.54)

• B. Kumar,S. Kulanthaivel, A. Mondal, S. Mishra, B. Banerjee, A. Bhaumik, I. Banerjee and S. Giri Mesoporous Silica Nanoparticle Based Enzyme Responsive System for Colon Specific Drug Delivery through Guar Gum Capping. Colloids and Surfaces B: Biointerfaces, 152 (2017), 352-361 (Impact factor: 3.88)

• T. Agarwal, P. Kabiraj, G. H. Narayana, S. Kulanthaivel, U. Kasiviswanathan, K. Pal, S. Giri, T. K. Maiti and I. Banerjee, Alginate Bead Based Hexagonal Close Packed 3D Implant for Bone Tissue Engineering. ACS Appl. Mater. Interfaces, 8 (2016), 32132−32145 (Impact factor: 7.50).

• V. K. Singh, I. Yadav, S. Kulanthaivel, B. Roy, S. Giri, T. K. Maiti, I. Banerjee and K. Pal, Groundnut oil based emulsion gels for passive and iontophoretic delivery of therapeutics, Designed monomers and polymers, 19 (2016), 297-308 (Impact factor: 1.497).

• S. Mohapatra*, S. R. Rout, R. K. Das, S. Nayak and S. K. Ghosh, Highly hydrophilic luminescent magnetic mesoporous carbon nanospheres for controlled release of anticancer drug and multimodal imaging, Langmuir, 2016, 32, 1611-1620. (I.F. 4.4)

• R. K. Das, J. P. Kar and S. Mohapatra,* Enhanced photodegradation of organic pollutants by carbon quantum dot (CQD) deposited Fe3O4@mTiO2 nano-pom-pom balls, Industrial & Engineering Chemistry Research, 2016, 55, 5902-5910. (I.F. 2.58)

• R. K. Das and S. Mohapatra,* Highly luminescent heteroatom doped carbon quantum dots for ultrasensitive sensing of glucosamine and targeted imaging of liver cancer cells, J. Mat. Chem. B., 2017, 5, 2190-2197. (I.F. 4.8)

• S. Kasturi and V. Sivakumar*, “Li3BaSrLa3(WO4)8:Eu3+ and Its Solid Solutions : A New Red Emitting Phosphor - Structure, Synthesis and Appraisal of Optical Properties’’ ChemistrySelect, 2, 5143–5156,2017.


68

• B. Rajamouli, and V. Sivakumar, “Effect of carbazole functionalization with a spacer moiety in the phenanthroimidazole bipolar ligand in a europium (III) complex on its luminescence properties: combined experimental and theoretical study’’ New J. Chem., 41, 1017-1027, 2017, [cited by 2]

• B. Rajamouli, C. S. DwarakaViswanath, S. Giri, C. K. Jayasankar and V. Sivakumar, “Carbazole functionalized new bipolar ligand for monochromatic red light emitting Europium (III) complex: combined experimental and theoretical study”- New J. Chem., 41, 3112-3123, 2017, [cited by 2]

• B. Rajamouli and V. Sivakumar, “Eu (III) complexes for LEDs based on carbazole- and fluorene-functionalized phenanthro-imidazole ancillary ligands: Detailed photophysical and theoretical study’’ Chemistry Select, 2, 4138–4149, 2017, [cited by 2]

• T. Jairam, Hidayath Ulla, K. AravindBabu, M.N. Satyanarayan, V. Sivakumar. “Star-Shaped Phenanthroimidazole-triphenylamine based yellow organic emitter for organic light emitting diodes” Chemistry select, ChemistrySelect, 2, 2611– 2620, 2017.

• S. Kasturi and V. Sivakumar*, “Luminescence properties of La2W2−xMoxO9 (x = 0–2):Eu3+ materials and their Judd–Ofelt analysis: novel red line emitting phosphors for pcLEDs” Mater. Chem. Front., 1, 5502-561, 2017, [cited by 2]

• K.AravindBabu, S. Giri, V. Sivakumar*, “Triphenylamine based Donor–π–Acceptor Organic Phosphors: Synthesis, Characterization and Theoretical study”, Mater. Chem. Front., 2017, Advance Article (chosen as a best work by Editor). DOI: 10.1039/c6qm00031b.

• S. Kasturi and V. Sivakumar*, “Eu2+ luminescence in Ca3Si2O7 and spectral widening and tuning of Eu2+ emission color (orangish-red to green) by crystal chemical substitution”, RSC Adv, 6, 98652-98662, 2016, [cited by 4]

• S. Kasturi and V. Sivakumar*, “Synthesis and Optical Properties of New Red Emitting Phosphor Li3BaSrGd3-xEux(MO4)8 for White LEDs”, Chemistry select, 1, 5448 -5462, 2016, [cited by 1]

• S. Kasturi, S. Satish Kumar and V.Sivakumar*, “Synthesis and photoluminescence properties of red emitting phosphor La2–xEuxLi0.5Al0.5O4 [x = 0.2–2] with K2NiF4 structure” Luminescence: The Journal of Biological and Chemical Luminescence, 32, 880-887, 2016.

• B. Rajamouli, S. Giri, V. Krishnan and V. Sivakumar*, “New dual characteristic bidentate ligand for ternary mono nuclear Europium (III) molecular complex: synthesis, photophysical, electrochemical and theoretical study” Eur. J. Inorg Chem., 3900-3911, 2016. [cited by 4]

• S. Kasturi, U.V. Varadaraju and V. Sivakumar*, “Synthesis and photoluminescence of Eu(II) in Barium zinc orthosilicate - A Novel green color emitting phosphor for white LEDs” Luminescence: The Journal of Biological and Chemical Luminescence, 32, 3342-340, 2016, [cited by 1].

• S. Kasturi, V. Sivakumar* and Duk young jeon, “Europium-activated rare earth fluoride (LnF3:Eu3+–Ln = La, Gd) nanocrystals prepared by using ionic liquid/NH4F as a fluorine source via hydrothermal synthesis” The Journal of Biological and Chemical Luminescence, 31, 1138-1145, 2016.

• The Beckmann rearrangement in the framework of reaction electronic flux.S. Giri, R. Inostroza-Rivera, M. Jana. Theor.Chem. Acc. 2017, 136, 9.

• Delineating the conformational flexibility of trisaccharides from NMR spectroscopy experiments and computer simulations. M. Yang, T. A. d’Ortoli, E. Säwén, M. Jana, G. Widmalm, A.D. MacKerell Jr. Phys. Chem. Chem. Phys.2016, 18, 18776.

• Effect of ethanol concentrations on temperature driven structural changes of Chymotrypsin Inhibitor D. Mohanta and M. Jana J. Chem. Phys.2016, 144, 165101.

• ‘Synthesis, structure and cytotoxicity of a series of Dioxidomolybdenum(VI) complexes featuring Salan ligands’, S. Roy, M. Mohanty, S. Pasayat, S. Majumder,K. Senthilguru, I. Banerjee,M. Reichelt,H. Reuter,E. Sinnand R. Dinda*, J. Inorg. Biochem., 2017, 172, 110.

• ‘Versatile Reactivity and Theoretical Evaluation of Mono- and DinuclearOxidovanadium(V) Compounds of Aroylazines: Electrogeneration of Mixed Valence VIVVV Complexes’, S. P. Dash, S. Roy, M. Mohanty, M. F. N. N. Carvalho, M. L. Kuznetsov, J. C. Pessoa, A. Kumar, Y. P. Patil, A. Crochet, R. Dinda*, Inorg. Chem., 2016, 55, 8407.

• ‘Study of DNA/BSA interaction and catalytic potential of oxidovanadium(V) complexes with ONO donor ligands’ , S. P. Dash, A. K. Panda, S. Dhaka, S. Pasayat, A. Biswas, M. R. Maurya, P. K. Majhi, A. Crochet, R. Dinda*, Dalton Trans., 2016, 45, 18292.

• S. Giri*, R. I. Rivera and M. Jana”The Beckman Rearrangement in the Framework of Reaction Electronic Flux” Theo. Chem. Acc. 2017, 136, 9.

• N. Panda, SA. Yadav and S. Giri”Palladium‐Catalyzed Oxidative Sulfamidation: A Stereoselective Synthesis for Enesulfonamides”Adv. Synth &Catal. 2017, doi:10.1002/adsc.201601048.

• G. N. Reddy and S. Giri*”M3NiAu5 [M= Na, K]: A Possible All Metal Magnetic Zintl Phase”Chem. Select. 2017, 2, 1530.

• L Rout, A Kumar, RS Dhaka, GN Reddy, S Giri, P Dash “Bimetallic Au-Cu alloy nanoparticles on reduced graphene oxide support: Synthesis, catalytic activity and investigation of synergistic effect by DFT analysis”Applied Catalysis A: General 2017, 538, 107.


69

• B Rajamouli, CSD Viswanath, S Giri, CK Jayasankar, VSivakumar “Carbazole functionalized new bipolar ligand for monochromatic red light-emitting europium (III) complex: combined experimental and theoretical study”New Journal of Chemistry 2017, 41, 3112.

• G. N. Reddy and S. Giri* “Organic Heterocyclic Molecules become Superalkalis” Phys. Chem. Chem. Phys., 2016, 18, 24356.

• S. Giri, G. N. Reddy and Puru Jena “Organo-Zintl Cluster [P7R4]: A New Class of Superalkalis” J. Phys. Chem. Letts. 2016, 7, 800-805.

• G. N. Reddy and S. Giri* “Super/hyperhalogen aromatic heterocyclic compounds” RSC Advances 2016, 6, 47145-47150.

• J. A. Teprovich, Jr., A. L. Washington, II, J. Dixon, P. A. Ward, J. H. Christian, B. Peters, J. Zhou, S. Giri, D. N. Sharp, J. A. Velten, R. N. Compton, P. Jenab and R. Zidan “Investigation of hydrogen induced fluorescence in C60 and its potential use in luminescence down shifting applications” Nanoscale, 2016, 44, 18760.

• B Rajamouli, P Sood, S Giri, V Krishnan and V Sivakumar “A Dual‐Characteristic Bidentate Ligand for a Ternary Mononuclear Europium (III) Molecular Complex–Synthesis, Photophysical, Electrochemical, and Theoretical Study” European Journal of Inorganic Chemistry2016, 24, 3900.

• S. Mishra; S. Dewangan; S. Giri; S. M. Mobin and Saurav Chatterjee “Synthesis of diferrocenylhydrazone-enone receptor molecule: Electronic com-munication, metal binding and DFT stud,y European Journal of Inorganic Chemistry 2016, 5485.

• AravindBabuKajjamSantanabGiri and Sivakumar V. “Triphenylamine-based donor–π–acceptor organic phosphors: synthesis, characterization and theoretical study” Materials Chemistry Frontiers, 2016 DOI: 10.1039/C6QM00031B”

• J. P. Dhal, S. K. Sahoo, B. G. Mishra, G. Hota, MgFe2O4-Fe2O3 heterostructured nanomaterials: Synthesis and photocatalytic study, Materials Letters, 196, 95–99, 2017.

• Shabna Patel, and G. Hota; “Iron oxide nanoparticles functionalized PAN nanofibers: Synthesis and adsorption studies” RSC Advances, 6, 15402, 2016.

• J. P. Dhal, S. K. Sahoo, B. G. Mishra, G. Hota, CuO decorated α-Fe2O3 nanorods: a novel visible light photocatalyst for degradation of Methyl orange (Communicated).

• Shabna Patel, and G. Hota, Synthesis and surface functionalization of e-spun PAN nanofibers membrane for adsorption of anionic dye from aqueous media (Communicated).

• Debayan Sarkar*, M.K.Ghosh, Nilendri Rout, Puspendu Kuila , “A Jack of Trio”- Robust One-pot Metal free Oxidative Amination, Azidation and Peroxidation of Phenols, New Journal Of Chemistry, 2017, 2017, 41, 3715—3718.

• Debayan Sarkar* and Sagarika Behera , Facile TMSOI Catalysed Stereoselective Synthesis of 2-Methylene Selanyl-4-Chromanols and Anti-Cancer Activity, Tetrahedron, Accepted Article.

• Susheeranjan Sahoo, Debayan Sarkar, Stereoselective synthesis of trans-2,3-dihydrobenzofurans via radical induced cyclopropyl ring fragmentation, Beilstein Journal Of Organic Chemistry – Accepted Article

• Debayan Sarkar* , Manoj Kumar Ghosh , Story of Heliannuols – A Unique Class of Structurally Diverse Benzoxacycles, Synthesis and Structural Revision, Current Organic Chemistry- Accepted Article

• S. Pradhan, J. Saha and B. G. Mishra, Morphology controlled phosphate grafted SnO2-ZrO2 nanocomposite oxides prepared by urea hydrolysis method as efficient hetrogeneous catalyst towards synthesis of 3- substituted indoles, New Journal of Chemistry, DOI: 10.1039/C7NJ00249A, 2017.

• Y.P. Bhoi, B.G. Mishra, Single step combustion synthesis, characterization and photocatalytic application of α-Fe2O3-Bi2S3 heterojunctions for efficient and selective reduction of structurally diverse nitroarenes., Chemical Engineering Journal 316, 70, 2017.

• Uttam Kumar Sahu, Siba Sankar Mahapatra, Raj Kishore Patel, Synthesis and characterization of an eco friendly composite of jute fiber and Fe2O3 nanoparticles and its application as an adsorbent for removal of As(V) from water, Journal of Molecular Liquids 273 (2017) 313-321.

• Basanti Ekka, Manoj Kumar Sahu, Raj Kishore Patel, Priyabrat Dash, Titania coated silica nanocomposite prepared via encapsulation method for the degradation of Safranin-O dye from aqueous solution: Optimization using statistical design, Water Resources and Industry,2016, http://dx.doi.org/10.1016/j.wri.2016.08.001

• Sushil Ranjan Bhatta, Varun Bheemireddy, Aruabha Thakur, A Redox-Driven Fluorescence ‘Off-On’ Molecular Switch Based on a 1,1α-Unsymmetrically Substituted bi-Ferrocenyl Coumarin System: Mimicking Combinational Logic Operation, Organometallics 2017, 36, 829–838

• Aruabha Thakur*, Varun Bheemireddy , Sushil Ranjan Bhatta, Access to an Abnormal Position of N-heterocyclic Carbene-Mn(II)-Complex by Pyrazolyl Phosphane with a Labile P-N Bond, J. Organomet. Chem, 2017, 832, 42-46

• Sushil Ranjan Bhatta, Varun Bheemireddy, Aruabha Thakur, Ferrocene-Triazole-Napthalene Triad: A Highly Selective and Sensitive Probe for Hg(II) and Cu(II) in Aqueous Medium, Sensors and Actuators B, 2017, 240, 640-65


70

• Sagnika Pradhan, Vivekananda Sahu, B.G. Mishra, CaO-ZrO2 nanocomposite oxide prepared by urea hydrolysis method as heterogeneous base catalyst for synthesis of chromene analogues. Journal of Molecular Catalysis A: Chemical, 425, 297, 2016.

• Sushil Ranjan Bhatta, Varun Bheemireddy, GonelaVijaykumar,Arunabha Thakur, Triazole appended mono and 1,1α di-substituted ferrocene-naphthalene conjugates: Highly selective and sensitive multi-responsive probes for Hg(II), Sensors and Actuators B 240 (2017) 640–650.

• Aruabha Thakur, Dipendu Mandal, Neutral tris(azolyl)phosphanes: An intriguing class of molecules in chemistry., Coordination Chemistry Reviews 329 (2016) 16–52

• Arunabha Thakur, Pavan Kumar Vardhanapu, Vijay Kumar Gonela, Sushil Ranjan Bhatta, Investigation on reactivity of non-classical carbenes with sterically hindered Lewis acid, B(C6F5)3 under inert and open conditions, J. Chem. Sci. Vol. 128, No. 4, 2016, pp. 613–620.

• Debayan Sarkar*,M.K.Ghosh, Nilendri Rout, PTAB Mediated Robust One-pot Synthesis of Spiroxacycles– an Economic Route- Stereoselective Synthesis of Spiroxadieneones, Organic and Biomolecular Chemistry, RSC, 2016, 14, 7883-7886.

• “Atom – Economic Palladium Carbon Catalysed de novo synthesis of Tri- substituted Nicotinonitriles” - Debayan Sarkar*, Nilendri Rout, Manoj Kumar Ghosh, SantanabGiri, K. Neue and H. Reuter. Journal of Organic Chemistry, 2017 ( Accepted Article ) (I.Factor – 4.849)

• “A Jack of Trio”- Robust One-pot Metal free Oxidative Amination, Azidation and Peroxidation of Phenols. Debayan Sarkar*, M.K.Ghosh, Nilendri Rout, PuspenduKuila 2017, New Journal Of Chemistry, 2017, 41, 3715—3718 (I.Factor - 3.227)

• Story of Heliannuols – A Unique Class of Structurally Diverse Benzoxacycles, Synthesis and Structural Revision. Debayan Sarkar*,Manoj Kumar Ghosh 2017 ( Current Organic Chemistry- Accepted Article)(I.Factor – 1.98) (BSP-COC-2016-969)

Publications in Conferences• Jitendra Kumar Sahoo, JuhiRath, Priyabrat Dash, and HarekrushnaSahoo*, EDTA functionalized magnetic nanoparticle as

a multifunctional adsorbent for congo red dye fromcontaminanted water, AIP Conference Proceedings (Bhubaneswar, India, December 26-30, 2016), 2017 (Accepted).

• Elemental Analysis of Various Feathers of Indian Rose Ringed Parakeet Psittaculakrameri, D Sabat, S Millan, P SuchismitaSethy, S Marathe, H Sahoo, M Mishra, 3rd International Multidisciplinary Microscopy and Microanalysis Congress (InterM) Proceedings, (Oludeniz, Turkey, 19-23 October 2015) 2016 (Accepted).

• I. Mattan, N. Panda “Synthesis of dibenzofurans viaC-H activation of ortho-iododiaryl ethers, “CRSI-GDChAngewandte Symposium, 13th July 2016”

• P. Mishra, N. Panda “Silver mediated annulation of enol-esters to isocoumarins” CRSI-GDChAngewandte Symposium, 13th July 2016”.

• J. K. Sahoo, J. Rath, P. Dash, H. Sahoo EDTA functionalized magnetic nanoparticle as a functional adsorbent for Congo red dye from contaminated water, AIP Conf. Proc., 1832, 050087, 2017.

• “Design Of Graphene Oxide-CuFe2O4 Nanocomposite A Highly Selective And Sensitive Room Temperature Ammonia Gas Sensor” 21st CRSI National Symposium in Chemistry (NSC-21),CSIR-Indian Institute of Chemical Technology, Hyderabad, July 13-16, 2017.

• “Ternary Graphene Oxide (GO)-CuFe2O4–ZnO Nanocomposite: A Magnetically Recyclable Hybrid for Photo degradation of Organic Pollutant under Solar Light” International Union of Materials Research Society, IISc Bangalore., Dec 11-16, 2016.

• “Bimetallic Nanoparticle Anchored Graphene Oxide as an Efficient Catalyst for Reduction of P-Nitrophenol” International Union of Materials Research Society, IISc Bangalore., Dec 11-16, 2016.

• “Design Of Graphene Oxide- CuFe2O4 Nanocomposite A Highly Selective And Sensitive Room Temperature Ammonia Gas Sensor” International Union of Materials Research Society, IISc Bangalore., Dec 11-16, 2016.

• Luminescent magnetic mesoporous carbon nanospheres for controlled release of anticancer drug and multimodal imaging, World Congress on Drug Discovery and Development, 23rd Nov to 25th Nov 2016, IISC Bengaluru.

• Fluorescence magnetic mesoporous carbon for delivery of doxorubicin, NANO INDIA, 15th-17th March, IIT Delhi.

• Boronic acid functionalized carbon quantum dot for sensing glucosamine, Recent Advances in Materials Chemistry, 24th-25th Feb, 2017, Utkal University, Bhubaneswar.

• K. AravndBabu, Alberto Bossi and V.Sivakumar*, “Near-IR Emitting Iridium(III) Complexes with Heteroaromaticiqbt (1-(benzo[b]thiophen-2-yl)-isoquinoline) Ancillary Ligand for OLED Applications” in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• B. Rajamouli and V. Sivakumar*, “New ternary Europium (III) molecular complex for OLEDs: combined experimental and theoretical study” in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• Kasturi S and V. Sivakumar*, “Red emitting Li3BaSrY3(WO4):Eu3+(0 – 3, in steps of 0.3):A new generation phosphor for white LEDs, synthesis and characterization” in NCLA-2017, Jan 9-11, IICT- Hyderabad.


71

• T. Jairam and V. Sivakumar*, “High Efficient Non-Doped Organic Light Emitting Devices Based on Star-Shaped Triphenylamine-Phenanthroimidazole Fluorophores” in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• R. Mari Kumar and V. Siva Kumar*, “Synthesis and Photoluminescence studies of Eu3+doped KGd5O5(VO4)2 Red phosphor for solid state lighting” in NCLA-2017, Jan 9-11, IICT- Hyderabad. in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• Rachana Devi, B. Rajamouli and V. Sivakumar*, “Design, synthesis and photophysical properties of bi-dentate ligand for Dy(III) complexes” in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• B.Rajamouli and V.Sivakumar*, “Synthesis of binuclear nuclear Eu(III) complex and their photophysical study for phosphorescent OLEDs’’ in NCLA 2016 February 18 - 20, R.T.M. Nagpur University, Nagpur, Maharashtra.

• S.Kasturi and V. Sivakumar*, “Li3BaSrLa3-x Eux (WO4)8 – A new red emitting phosphor, synthesis and investigation of structural and luminescence behavior.”, NCLA 2016, Nagpur.

• K.AravindBabu and V.Sivakumar*, “Green emitting heterolepticIr(III) complexes and their photophysical study’’ in NCLA 2016 February 18 - 20, R.T.M. Nagpur University, Nagpur, Maharashtra – Oral presentation.

• RupamDinda*, ‘Chemistry of variable valence oxidometal (Mo and V) complexes: Solution behaviour, theoretical and biological evaluation’, 2nd National Conference on New Frontiers in Chemistry - From Fundamentals to Applications – II (NFCFA – 2017), BITS-Pilani, Goa Campus, Goa, India, 28-29 January, 2017.

• RupamDinda*, ‘Versatile reactivity and theoretical evaluation of non-oxido and oxidometal (Mo and V) complexes of mono- and dibasic Ligands: Solution behavior and biological activities’, 5th Symposium on Advanced Biological Inorganic Chemistry (SABIC-2017), Kolkata, India, 7-11 January, 2017.

• RupamDinda*, ‘Chemistry of non-oxidovanadium(IV) and oxidovanadium(V) complexes of aroylazines: Versatile reactivity and theoretical evaluation’, The 10th International Vanadium Symposium (V10): Chemistry, Biological Chemistry, & Toxicology, Howard International House, Taipei, Taiwan, 6-9 November, 2016.

• Pilli Govindaiah, participated in workshop and presented a poster entitled: “In Silico Design, Synthesis, Characterization, Virtual Screening and Biological Evaluation of Novel phenyleneBis(Cyanoacetylhydrazone) Isomers” in International conference on Drug design held at JNU Delhi from April 7th to 9th,2017.

• Invited Lecture in “ International Conferrence in Frontiers in Chemical Sciences 2017, 16-18 March 2017 at Central University Jharkhand, Ranchi

• Invited Presentation at Dr. Reddy’s Institute of Life Sciences, Hyderabad, 23rd Oct. 2016

Paper Accepted for Publication• M. Mishra,* D. Sabat, B. Ekka, S. Sahu, U.P, P. Dash, “Oral Intake of Zirconia Nnaoparticle alters neuronal Development and

Behavioior of Drosophila melanogaster”, J. Nanopart. Res., 2017. (Accepted) (IF: 2.020)

• B. Rajamouli and V. Sivakumar, “Bi-nuclear luminescent Europium(III) molecular complexes for white light emitting diodes: Experimental and theoretical study’’ Photochemical &Photobiological Sciences, 2017 (Accepted).

Books / Book Chapter• L. Satish, S. Millan, J. Sahoo, G. Chakraborty, L. Swain, S. K. Mishra, and H. Sahoo*, Renaissance of Bioremediation:

Degradation of Environmental Pollutants”, In Environmental Science and Engineering, (Chief Editor: Dr. B. R. Gurjar and Executive Editor: Dr. J. N. Govil), Studium Press LLC, USA, 2017, pp xxx - xxx (ISBN 1-62699-096-4).

• L. Satish, S. Millan and H. Sahoo*, Protein stability and conformation: An impact of ionic liquids (Editor: LudumilaBucur), Lambert Publication, Germany 2017 .ISBN 978-3-330-04179-0.(In press).

• V. Sivakumar and Rajamouli B., Molecular designing of Luminescent Europium Metal Complexes for OLEDs: An Overview, 2016, Pan Stanford Publishing, Singapore.

• V. Sivakumar and Kasturi S., Eu3+ based orange - red emitting inorganic colour convertors: An overview, 2016, Pan Stanford Publishing, Singapore.

Patent• “PTAB”- a multipurpose economic reagent for all Dearomatisation reactions- in the process of PATENT Filling- D. Sarkar,

M.K.Ghosh, N.Rout 2017


72


By Faculty:• H. K. Sahoo Outstanding Faculty Award, 2017, Venus International Foundation, Chennai.

• Dr. P. Dash Reviewer of prestigious chemistry journals like Applied Surface Science, RSC Advances, Beilstein journal of Nanotechnology, Current Organic Chemistry, catalysis letters, materials letters, chemosphere, and journal of molecular catalysis A, chemical, Journal of Water Process Engineering, Current Nanoscience, etc.

• Dr. Sasmita Mohapatra: Odisha Young Scientist Award, Odisha Bigyan Academy, Department of Science and Technology, Government of Odisha.

• VIFA International Young Scientist Award 2017.

• Tohoku University Visiting Professor – Awarded (Dec 2017 – June 2018).

• “Certificate of Appreciation” by Education Expo-FBA- 2017 (Young Scientist Category).

By Students:• S. Millan, Best Poster Award, International Conference at Berhampur University, 5-7th March 2017.

• Mr. Aniket Kumar received the “Best presentation of the Institute” “Research Scholar’s Week 2017” (RSW-2017) held at NIT Rourkela, 2016.

• Rahul K. Das: Best Oral Presentation Award, World congress on drug discovery and development, 23rd Nov to 25th Nov 2016, IISC Bengaluru.

• Best Poster Award: R. Mari Kumar and V. Siva Kumar*, “Synthesis and Photoluminescence studies of Eu3+doped KGd5O5(VO4)2 Red phosphor for solid state lighting” in NCLA-2017, Jan 9-11, IICT- Hyderabad. in NCLA-2017, Jan 9-11, IICT- Hyderabad.

• Best Poster Award: T. Jairam and V. Sivakumar*, “Synthesis and photo physical studies of new Triphenylamine - Phenontroline based bipolar material for phosphorescent OLED” in NCLA 2016 February 18 - 20, R.T.M. Nagpur University, Nagpur, Maharashtra.

• Appreciation Award: K.AravindBabu and V.Sivakumar*, “Green emitting heterolepticIr(III) complexes and their photophysical study’’ in NCLA 2016 February 18 - 20, R.T.M. Nagpur University, Nagpur, Maharashtra – Oral presentation.

• G. Naaresh Reddy; Best Poster Award, Theoretical Chemistry Symposium, University of Hyderabad, December 2016.

• Best Poster Prize by Ph.D Student Mr. SushreeRanjanSahoo at “ International Conferrence in Frontiers in Chemical Sciences 2017, 16-18 March 2017 at Central University Jharkhand, Ranchi.

• Best Institute M.Sc,. Project 2017 by Mr. Suchit Gupta.

Technical Association / Societies• Dr. G Sahoo joined as Member in Orissa Chemical Society.

• Dr. H. K.Sahoo elected as Life time Member: Indian Photobiology Society, Orissa Chemical Society.

• Dr. N. Panda elected as Life member- Chemical Research Society of India (CRSI), 2017.

• Dr. P Dash elected as Member of MRS (Materials Research Society) and CSC (Canadian Society of Chemistry).

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Dr. G Sahoo has participatedin “30th Annual Conference of Orissa Chemical Society” held at KIIT University, Bhubaneswar

during 24-25th December 2016.

• Dr.P dash given Guest Lecture “Measurement of Surface Area and Porosity of Solid Samples utilising Gas Adsorption Techniques”, 17th September, 2016, NIT Rourkela, TEQIP-II sponsored workshop on “Challenges in Synthetic Chemistry and its Industrial Applications” (CSCIA).

• Dr. P Dash given Guest of Honour Lecture in “Zoom into an Alternate World of Nanoscience and Nanotechnology” 26th February, 2017, Christ College, Cuttack, Odisha, UGC workshop on “Emerging areas in Chemistry”.

• Dr.P Dash Acted as co-ordinator and judge in the poster session on “Research Scholar’s Week 2017” (RSW-2017) held at NIT Rourkela, 2016.

• Prof. R Dinda attended and presented a lecture at ‘The 10th International Vanadium Symposium (V10): Chemistry, Biological Chemistry, & Toxicology, Howard International House, Taipei, Taiwan, 6-9 November, 2016.


73

• Prof. R Dinda went for short term research stay for two months (4th May to 30th June, 2017) as DAAD Visiting Scientist at University of Jena, Germany funded by DAAD.


AgencyName of the PI Total Value


Exploration of Mn/Fe based ternary chalcogenides for possible applications in magnetic refrigeration

SERB, DST Dr. Saroj L Samal 29.9 09-03-2016 09-03-2019

Investigation of the magnetic structure of gold based intermetallics and FeSb2Se4 related compounds

UGC-DAE CSR Saroj L Samal 10.5 01-01-2016 01-01-2019

Photocatalytic ozonation route for removal of pesticides from aqueous sources. 2016-2019

DST-WTI Dr. B.G. Mishra 26.5 2016 2019

Catalytic application of zirconia based nanosize functional heterogeneous catalyst. 2016-2019

BRNS Dr. B.G. Mishra 23.12 2016 2019

Bromophycolides as

Antimalarial and Anticancer Natural Products: Their Total Synthesis using

AsymetricOrganocatalytic α-bromination Reaction.

Science and Engineering

Research Board, DST, New Delhi

Gokarneswar Sahoo

40,92,000.00 19-01-2017 18-01-2020

Interaction between Glycans and GDNF. MRP (DAAD)Start-up grant

Dr. Harekrushna Sahoo

10 Approved

Exploring Molecular Intricacy – Developing Facile Catalytic Asymmetric Oxidative Dearomatisation Reactions (CAODRs) ( Sanctioned) 2017- 2020

DST-SERB Dr. D. Sarkar 42 2017 2020

Ruthenium catalysed Non-Metathesis Couplings

DST-INSPIRE FACULTY AWARD.

Dr. D. Sarkar 35 2014 2019

Transition-metal catalyzed C-H activation and functionalization: Synthesis of newer heterocycles

CSIR N. Panda 24.96 24-4-2017 23-4-2020

Development and Reactions of StereoselectiveEnamides and Enol-esters

SERB N. Panda 40.6 Oct 2014 Oct 2017

Synthesis, characterization and reactivity of transition metal clusters and their potential towards metal nanoparticles

SERB S. Chatterjee 38 2014 Aug 2017

Design of binary materials using transition metal chalcogenide and pnictide complexes. 2015-2017

DST-DAAD, Indo–German Joint research

project

S. Chatterjee 12 2015 2017

Spatial distribution of uranium and water quality parameters from ground water and drinking water

BRNS Dr. Priyabrat Dash ~25 June 2016 May 2018

Spatial distribution of uranium and water quality parameters from ground water and drinking water in Sundargarh, Sambalpur, and Jharsuguda

BRNS Dr. Priyabrat Dash

(co-PI)

~25 July 2014 June 2017

Development of colon specific drug delivery system using natural carbohydrate polymer capped, photoluminescent mesoporous silica nanoparticles.

DST-WOS-A SupratimGiri (PI) 16.5 July 2016 Apr 2019


74


Name of the PI Total Value (Rs. in Lakhs)


functionalized magnetic oxide luminescent carbon dot hybrid hollow spheres for multimodal imaging

DST-SERB Dr. Sasmita Mohapatra

40 Dec 2015 Dec 2018

Metal free deep blue emitting fluorophores for organic light emitting diodes:

approaching NTSC standard

SERB, DST Prof. V. Sivakumar

~43 Approved

“Molecular design, synthesis and evaluation of novel hydrazone derivatives and their transition metal complexes as potential anticancer agents”

DBTSanction No: 6242- P112/

RGCB/PMD/DBT/RPDA/2015

Dr. Rupam Dinda 27 2015 2018

Theoretical Investigation on Magnetic All Metal and Organo-Zintl Cluster

DST Dr. Santanab Giri 35 Oct 2014 Oct 2019

Insights into the mechanism of chemical reactions: A conceptual density functional and ab-initio molecular dynamics study

DST SERB Dr. Santanab Giri 20 Mar 2016 Mar 2019



Name of the Project





1. Organocatalysis and natural product laboratory (G Sahoo)

2. Nanochemistry laboratory

3. Molecular simulation and computational chemistry research laboratory

4. Cell culture laboratory

5. Bio-orgranometallic research laboratory ( Dr. S Chatterjee)

EQUIPMENT ACQUIREDSl. No. Name of the Equipment Amount (Rs. In Lakhs)

1. Multi frequency Sonicator ( P Dash) 1.10

2. Spectrofluorometer 32 lakhs


75


B. Rajamouli Rational design and synthesis of optoelectronic lanthanide based molecular materials for OLEDs (Thesis submitted)

Prof. V. Sivakumar

Satabdi Roy Chemistry of Transition Metal Complexes with O- and/or N- Donor Ligands: Synthesis, Characterization and Study of Reactivit

Dr.Rupam Dinda

Sasmita Mishra Synthesis of Cp based organometallic compounds and their electrochemical and biological studies

Prof. S. Chatterjee

Vijaylakshmi Tirkey Ferrocene Based Ligand System and their Metal Complexes ( Thesis submitted) Prof. S. Chatterjee


Department of EARTH & ATMOSPHERIC SCIENCES


130 | P a g e




FACULTY

SL Name & Specialization1 Prof. Sk. Md. Equeenuddin ([email protected])

Assistant Professor, Ph. D. (IIT, Kharagpur)Aqueous Geochemistry, Hydrogeology, Nanogeosciences, Metal Mobilization,Application of Remote Sensing

2 Prof. Hrusikesh Mishra ([email protected])Visiting Professor, Ph. D. (University of Wollongong, Australia)Coal Petrology and its application to Coal and Hydrocarbon Exploration,CBM & Shale Gas Exploration

38

7

0

5

10

15

20

25

30

35

40

M.Sc. (2 Years) Ph.D.

60

0

10

20

30

40

50

60

70

M.Sc. ( 2 Years)


130 | P a g e




FACULTY

SL Name & Specialization1 Prof. Sk. Md. Equeenuddin ([email protected])

Assistant Professor, Ph. D. (IIT, Kharagpur)Aqueous Geochemistry, Hydrogeology, Nanogeosciences, Metal Mobilization,Application of Remote Sensing


38

7

0

5

10

15

20

25

30

35

40

M.Sc. (2 Years) Ph.D.

60

0

10

20

30

40

50

60

70

M.Sc. ( 2 Years)


76

FACULTYSL Name & Specialization

1 Prof. Sk. Md. Equeenuddin ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Aqueous Geochemistry, Hydrogeology, Nanogeosciences, Metal Mobilization, Application of Remote Sensing


3 Prof. Jagabandhu Panda ([email protected])Assistant Professor, Ph. D. (IIT, Delhi)Mesoscale and Regional Scale Modelling, Urbanization Effects, Remote Sensing Applications in Atmospheric Science, Aerosol-Cloud Interaction

4 Prof. Sakthi Saravana Chinnasamy ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Ore Geology, Metamorphic Petrology, Fluid Inclusion Studies

5 Prof. Bhaskar Kundu ([email protected])Assistant Professor, Ph.D (CSIR-NGRI, Hyderabad)Tectonic Geodesy (Seismology, Crustal Deformation study, Active Tectonics)

6 Prof. Naresh Krishna Vissa ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur)Air-Sea Interactions, Physical Oceanography

7 Prof. Rekha S ([email protected]) Assistant Professor, Ph. D. Metamorphic Petrology, Structural Geology, Geochronology

8 Prof. Bhishma Tyagi ([email protected]) Assistant Professor, Ph. D. Dynamics of Atmospheric Boundary Layer, Air Pollution Study, Atmospheric Modeling

9 Prof. Krishna Kishore Osuri ([email protected]) Assistant Professor, Ph. D.Numerical Weather Prediction, Data assimilation, Tropical Cyclone and Monsoon Rainfall, Land Surface Processes, Climate Studies

PUBLICATION

Publications in Journals• Kundu, B., Vissa, N.K., Panda, D., Jha, B., Asaithambi, R., Tyagi, B., Mukherjee, S., “Influence of a meteorological cycle in

mid-crustal seismicity of the Nepal Himalaya”, Journal of Asian Earth Sciences, vol. 146, pp. 317–325, 2017.

• Gogikar, P., and Tyagi, B., “Assessment of particulate matter variation during 2011–2015 over a tropical station Agra, India”, Atmospheric Environment, vol. 147, pp. 11-21, 2016, cited by 3.

• Osuri KK, R Nadimpalli, U C Mohanty and D Niyogi, 2016: Prediction of intensity changes of very severe cyclonic storm Phailin over Bay of Bengal using HWRF modelling system, Quarterly Journal of Royal Meteorological Society, DOI: 10.1002/qj.2956, (in press).

• Osuri KK, R. Nadimpalli, U. C. Mohanty, F.Chen, M. Rajeevan, and D. Niyogi: 2016: Improved prediction of severe thunderstorms over the Indian Monsoon region using high resolution soil moisture and temperature initialization, Nature Sci. Rep. 7, 41377; doi: 10.1038/srep41377.

• Pothapakula P K, KK Osuri, S Pattanayak, U C Mohanty, S Sil and Raghu Nadimpalli, 2017: Observational perspective of SST changes during life cycle of tropical cyclones over Bay of Bengal, Natural Hazards, DOI 10.1007/s11069-017-2945-9.

• Nageswararao MM, UC Mohanty, AP Dimri and Osuri KK, 2017: Probability of occurrence of monthly and seasonal winter precipitation over Northwest India based on antecedent-monthly precipitation. Theoretical and Applied Climatology, 1-13, DOI 10.1007/s00704-017-2171-0.

• P. K. Sahoo, S. Tripathy, M. K. Panigrahi, Sk. Md. Equeenuddin, “Anthropogenic contamination and risk assessment of heavy metals in stream sediments influenced by acid mine drainage from a northeast coalfield, India”, Bulletin of Engineering Geology and Environment, 76(2), 537-552, 2017, cited by 0 [On Line].


77

• A. Kumar, D. Mishra, Sk. Md. Equeenuddin, H. J. Cho, G. Rastogi, “Differential impact of anniversary-severe cyclones on water quality of a tropical coastal lagoon”, Estuaries and Coasts, 40(2), 317-342, 2017, cited by 0 [On Line].

• Sk. Md. Equeenuddin, S. Tripathy, P. Sahoo, A. Ranjan, “Geochemical characteristics and mode of occurrence of trace elements in coal at West Bokaro coalfield”, International Journal of Coal Science and Technology, 3(4), 399-406, 2016, cited by 0 [On Line].

• F. Bastia, Sk. Md. Equeenuddin, “Spatio-temporal variation of water flow and sediment discharge in the Mahanadi river, India”, Global and Planetary Change, 144, 51-66, 2016 cited by 1 [On Line].

• B. K. Pattnaik, Sk. Md. Equeenuddin, “Potentially toxic metal contamination and enzyme activities in soil around chromite mines at Sukinda ultramafic complex, India”, Journal of Geochemical Exploration, 168, 127-136, 2016, cited by 2 [On Line]

• P. K. Sahoo, Sk. Md. Equeenuddin, M. A. Powell, “Trace elements in soil around coal mines: current scenario, impact and available techniques for management”, Current Pollution Report, 2, 1-14, 2016, cited by 1 [On Line].

• S.S. Chinnasamy, B. Mishra “Genetic implications of disordered graphite in the Jonnagiri granodiorite-hosted gold deposit, Eastern Dharwar Craton”, India. Ore Geology Reviews, Vol.89 pp. 587-593, 2017.

• B Kundu, NK Vissa, D Panda, B Jha, R Asaithambi, B Tyagi, S Mukherjee, “Influence of a meteorological cycle in mid-crustal seismicity of the Nepal Himalaya”, Journal of Asian Earth Sciences,In-press,2017.

• K Gahalaut, A Hassoup, H Hamed, B Kundu, V Gahalaut, “Long-Term and Annual Influence of Aswan Reservoir (Egypt) on the Local Seismicity: A Spatio-Temporal Statistical Analysis”, Pure and Applied Geophysics, 174 (1), 133-150,2017.

• Rajeev Kumar Yadav,P.N.S. Roy,Sandeep Kumar Gupta, P.K. Khan, J.K. Catherine, Sanjay K. Prajapati,Amit Kumar, N. Puviarasan,dHarsh Bhu,M. Devachandra, Javed Malik, Bhaskar Kundu, Chandrani Debbarma, V.K. Gahalaut, “Rupture model of Mw 7.8 2015 Gorkha, Nepal earthquake: Constraints from GPS measurements of coseismic offsets”, Pure and Applied Geophysics, 174 (1), 133-150, 2017.

• B. Kundu, A Ghosh, M Mendoza, R Bürgmann, VK Gahalaut, D Saikia, “Tectonic tremor on Vancouver Island, Cascadia, modulated by the body and surface waves of the Mw 8.6 and 8.2, 2012 East Indian Ocean earthquakes”, Geophysical Research Letters, 43 (17), 9009-9017,2016.

• V.K. Gahalaut, B. Kundu, “The 4 January 2016 Manipur earthquake in the Indo-Burmese wedge, an intra-slab event”, Geomatics, Natural Hazards and Risk, 7 (5), 1506-1512,2016.

• R.K. Yadav, H Nankali, B. Kundu, P Patel, VK Gahalaut, “Finite fault slip models for the 11 August 2012 Varzaghan-Ahar, NW Iran earthquakes (Mw 6.4 and 6.3) from near-field GPS measurements of coseismic offsets”, Journal of Asian Earth Sciences, 115, 268-272,2016.

• Jain S., J. Panda, Sudhansu S. Rath, and P.C.S. Devara, “Evaluating Land Surface Models in WRF Simulations over DMIC Region”, Indian Journal of Science and Technology, vol. 10, pp. 1-24, 2017, cited by 0 [On Line].

• Kant S., J. Panda, R. Gautam, P. K. Wang and S. P. Singh, “Significance of Aerosols Influencing Weather and Climate over Indian Region”, Int. J. of Earth and Atmos. Science, vol. 04, pp. 1–20, 2017, cited by 0 [On Line].

• Shrivastava D., B. Nayak, S. Kant, and J. Panda, “A Review on Health Impacts of Air Pollutants with a Special Mention to Eastern Parts of India, a Growing Hub for Diseases”, Int. J. of Earth and Atmos. Science, vol. 04, pp. 21-23, 2017, cited by 0 [On Line].

• Kumar A, M.S. Shekhar, J. Panda, and A. Singh, “Improving Mesoscale Precipitation Forecast Over Different Stations in Western Himalaya Using Model Output Statistics”, Int. J. of Earth and Atmos. Science, vol. 04, pp. 34-43, 2017, cited by 0 [On Line].

• Anoop Kumar Mishra, J. Panda, and Mohammd Rafiq, “Increasing Risk of Droughts and Floods and Decline in Ground Water Level in Warming Environment”, Int. J. of Earth and Atmos. Science, vol. 04, pp. 127-132, 2017, cited by 0 [On Line].

Publications in Conferences• Gogikar, P., and Tyagi, B., “Air Quality Assessment over Mining area of Chandrapur during 2012-2016”, National Conference

on Sustainable Mining Practices, National Institute of Technology Rourkela, 2-3 December, 2016.

• K K Osuri, Raghu Nadimpalli, U. C. Mohanty, F.Chen , M. Rajeevan , and D. Niyogi, 2016: Impact of high resolution land surface initialization in prediction of deep convection over the eastern parts of India, National Symposium on Tropical Meteorology: Climate Change and Coastal Vulnerability [TROPMET-2016], Siksha ‘O’ Anusandhan University, Bhubaneswar, 18-21 December 2016.

• Nanda Kishore Reddy B, R Venkatesan, S Sivareddy, KK Osuri, U C Mohanty, 2016: Subsurface thermohaline features of warm core eddy in North Bay of Bengal using Moored Buoy Observations, National Symposium on Tropical Meteorology: Climate Change and Coastal Vulnerability [TROPMET-2016], Siksha ‘O’ Anusandhan University, Bhubaneswar, 18-21 December 2016.


78

• Raghu Nadimpalli, , KK. Osuri, U. C. Mohanty, S. Sil,, 2016, Impact of vortex initialization in the predictions of Tropical cyclones over Bay of Bengal, National Symposium on Tropical Meteorology: Climate Change and Coastal Vulnerability [TROPMET-2016], Siksha ‘O’ Anusandhan University, Bhubaneswar, 18-21 December 2016.

• Raghu Nadimpalli., KK. Osuri, U. C. Mohanty and D. Niyogi, 2016: Prediction of intensity changes of very severe cyclonic storm Phailin over Bay of Bengal using HWRF modelling systems, National Symposium on Tropical Meteorology: Climate Change and Coastal Vulnerability [TROPMET-2016], Siksha ‘O’ Anusandhan University, Bhubaneswar, 18-21 December 2016.

• Bhattacharya S, KK Osuri, Raghu Nadimpalli, U C Mohanty, S Kiran Prasad, 2016: Precipitation assimilation and Impact studies on simulation of track and intensity of tropical cyclones over NIO basin, National Symposium on Tropical Meteorology: Climate Change and Coastal Vulnerability [TROPMET-2016], Siksha ‘O’ Anusandhan University, Bhubaneswar, 18-21 December 2016.

• S.S. Chinnasamy, “Ore fluid characteristics of orogenic gold deposits: An overview”, National Symposium on Challenges and Strategies on Mineral Exploration and Mining, Nagpur India Journal of Geosciences Research, Vol.1, pp 279-280, 2017.

• S.S. Chinnasamy, Preliminary fluid inclusion study from Chigargunta gold deposit at south Kolar greenstone belt Asian Current Research in Fluid Inclusion (ACROFI-IV) IIT Bombay, p 160, 2016.

• V.R. Troll, F. Weis, C. Harris, E. Jonsson, K. Högdahl, M. Millet, A. Barker, S. S. Chinnasamy, K. P. Nilsson Magmatic origin of ‘Kiruna-type’ apatite-iron-oxide ores revealed by Fe-O isotope correlations International Geological Congress (IGC), Cape Town, 2016.

• Sk. Md. Equeenuddin and Basanta K Kishan, “Assessment of chromium pollution at Nuasahi-Baula mines, Odisha”, National Conference on Sustainable Mining Practices, National Institute of Technology Rourkela, 2-3 December, 2016

Paper Accepted for Publication

Books / Book Chapter• Dev Niyogi, S. Subramanian and KK. Osuri, 2015: The Role of Land-Surface Processes on Tropical cyclones: Introduction to

Land-Surface Models, Advanced Numerical Modeling and Data Assimilation Techniques for Tropical Cyclone Prediction, pp 221 – 246, The Springer Netherlands, Eds. UC Mohanty and S.G. Gopalakrishnan, ISBN 978-94-024-0894-2 (HB), ISBN 978-94-024-0896-6 (e-book).

• Dev Niyogi, KK. Osuri, S. Subramanian and U. C. Mohanty, 2015: The Role of Land-Surface Processes on extreme weather events: Land data Assimilation System, Advanced Numerical Modeling and Data Assimilation Techniques for Tropical Cyclone Prediction, pp 247-266, The Springer Netherlands, Eds. UC Mohanty and S.G. Gopalakrishnan, ISBN 978-94-024-0894-2 (HB), ISBN 978-94-024-0896-6 (e-book).

• Routray A, KK. Osuri, S. Pattanayak, and U. C. Mohanty, 2015: Introduction to Data Assimilation Techniques and Ensemble Kalman Filter, Advanced Numerical Modeling and Data Assimilation Techniques for Tropical Cyclone Prediction, pp 307 – 330, The Springer Netherlands, Eds. UC Mohanty and S.G. Gopalakrishnan, ISBN 978-94-024-0894-2 (HB), ISBN 978-94-024-0896-6 (e-book).

• Mohanty UC, KK.Osuri and Sujata Pattanayak, 2015: Tropical Cyclone Research over the North Indian Ocean: Impact of data and vortex initialization in High Resolution Mesoscale Models, Advanced Numerical Modeling and Data Assimilation Techniques for Tropical Cyclone Prediction, pp 465 – 498, The Springer Netherlands, Eds. UC Mohanty and S.G. Gopalakrishnan, ISBN 978-94-024-0894-2 (HB), ISBN 978-94-024-0896-6 (e-book).

• Singh K., J. Panda, K. K. Osuri and N. K. Vissa, “Progress in tropical cyclone predictability and present status in the North Indian Ocean region”, Book chapter for the book “RECENT HURRICANE RESEARCH II: DYNAMICS, PREDICTION, AND DETECTION” (ISBN 978-953-51-4702-2), 24pp, 2016, cited by 0 [On Line].

Patent


By Faculty:Prof J Panda received Best paper publication award 2016 from Indian Society of Remote Sensing

By Students:

Technical Association / Societies• Life member: Indian Society of Remote Sensing• Life member: Indian Meteorological Society • Member: Asia Oceania Geosciences Society


79

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS

Conducted:

Attended:• 10-14 July 2017: Participated in Training program on “Greenhouse gases measurements, interpretation and inverse modeling”

organized by Indian Institute of Tropical Meteorology, Pune, India



(Rs. inLakhs)Start Date Close Date

Recoverable reserve estimation using non-gaussian copula-based ore body simulation along with open pit and stope optimization techniques

Ministry of Mines, Govt. Of

India

Sk. Md. Equeenuddin

12.3 01-09-2014 Continuing

Structure, metamorphism and chronology of melting and deformation in the Kerala Khondalite Belt and across the Achankovil Shear Zone: relevance to Gondwanaland assembly

SERB, Department of Science & Technology,

Govt. of India

Dr. Rekha S. 31.2 23-02-2015 23-02-2018

Stable isotopic and fluid inclusion studies on orogenic gold deposits in the Dharwar Craton:Implications on source of gold transporting fluids and metals.


Govt. of India

Dr. Sakthi Saravanan

Chinnasamy

23.00 16-10-2015 15-10-2018

Interaction of urban boundary layer with mesoscale weather in coastal and continental city environment


Govt. of India

Dr. Jagabandhu Panda

34.232 09-09-2016 08-09-2019

Analysing Martian atmospheric characteristics pertaining to dust storms, dust devils and clouds using MOM observations and a numerical model

SAC-ISRO Dr. Jagabandhu Panda

18.332 01-10-2016 30-09-2016

Preparing a size based database of North Indian Ocean cyclones and studying their meteorological characteristics using scatterometer products and two numerical models during warming climate scenario

Space Applications

Centre, Ahmedabad

Dr. Jagabandhu Panda

21.132 May 2017 May 2020

Process identification of pre-monsoon season convectiveactivity genesis and response of thermodynamics under a climate change scenario over Eastern and NortheasternIndia


Govt. of India

Dr. Bhishma Tyagi

Rs. 2362200 Aug 2017 Aug 2020

Bay of Bengal mesoscale eddies role on rainfall, convection and winds: A multi-sensor study

Ministry of Earth Sciences, Govt.

of India

Naresh Krishna Vissa

22.482 Dec 2016 Dec 2019


80


Name of the PI Total Value(Rs. inLakhs)


Probing the changes in the frequency and intensity of short-duration extreme rainfall events over east coast of India


Govt. of India

Naresh Krishna Vissa

23.902 Mar 2017 Mar 2020

Advancing prediction skill of rapid intensity changes of Tropical cyclones over North Indian Ocean.


Govt. of India

Dr. Krishna Kishore Osuri

44.912 Mar 2017 Mar 2020

Improvement in heavy rainfall prediction over Eastern sector of India using high resolution mesoscale analysis and modelling system

Ministry of Earth Sciences, Govt.

of India

Dr. Krishna Kishore Osuri

57.90 Jun 2017 Jun 2020

Crustal deformation study across Narmada-Son Failed rift zone, Central India

MoES Dr. Bhaskar Kundu

102.00 2017 2022


Kamaljeet Singh Ahluwalia, Barbil Surface run-off management study at Nuagaon iron ore mines, Guali

Sk. Md. Equeenuddin

NTPC, Kania Examination of Petrography of aggregate and alkali aggregate reactivity study

Sk. Md. Equeenuddin

BYGGING India Limited Examination of Petrography of aggregate and alkali aggregate reactivity study

Sk. Md. Equeenuddin

Odisha Mining Corporation Limited Surface run-off management study at 3 iron and 2 Chromite mines, OMC

H. B. Sahu

Sk. Md. Equeenuddin


Name of the Project




EQUIPMENT ACQUIREDSl. No. Name of the Equipment Amount (Rs. in Lakhs)

1. Automatic Weather Station & portable weather kit 82. Linkam THMSG 600 Geological Heating Freezing Stage for Fluid Inclusion Studies 10.53. Petrological Microscope 20.004. Microtop II SUNPHOTOMETER 10.05. AquaChem Software 2.06. R730 server with two processors having Linux OS and additionally Intel Parallel Studio

put in a 42U rack 17.0

7. One high-end desktop and one L655 EPSON all in one machine 1.3


81

LIST OF LABORATORIESSl. No. Name of the Laboratories

1. Atmospheric Instrumentation2. Modelling and Simulation Laboratory3. Petrology4. Fluid Inclusion microthermometry lab Equipment: LINKAM THMSG600 Heating freezing stage.5. Structural Geology6. Optical Microscope7. Established Coal Geology8. Modelling and Simulation9. Geochemistry10. Hydrogeology



Department of ELECTRONICS & COMMUNICATION ENGINEERING


139 | P a g e




Placement StatisticsElectronics & Communication Engineering

44

66

19

16

35

0

10

20

30

40

50

60

70

B.Tech. M.Tech.(2 Years) M.Tech Dual (5Years)

M.Tech.(Res.) Ph.D.

EC EI

153

131

141

135

120

125

130

135

140

145

150

155

B.Tech. M.Tech. (2 Years) M.Tech Dual (5 Years)

EC EI


82


139 | P a g e




Placement StatisticsElectronics & Communication Engineering

44

66

19

16

35

0

10

20

30

40

50

60

70

B.Tech. M.Tech.(2 Years) M.Tech Dual (5Years)

M.Tech.(Res.) Ph.D.

EC EI

153

131

141

135

120

125

130

135

140

145

150

155


EC EI


Electronics & Communication Engineering

140 | P a g e

Electronics & Instrumentation Engineering

FACULTY MEMBERS

SL Name & Specialization1 Prof. Kamalakanta Mahapatra ([email protected])

Professor , Ph.D. (IIT Kanpur) Power Electronics, Electronic Circuits & Design, VLSI Design, Embedded Systems, IOT for critical application

2 Prof. Sarat Kumar Patra ([email protected])Professor , Ph.D. (Edinburgh)Signal Processing, Fuzzy Systems, Mobile Communication

3 Prof. Sukadev Meher ([email protected])Professor, Ph.D. (NIT Rourkela)Digital Image Processing, Digital Signal Processing, computer vision, electronics instrumentation

1 1 1 12

1 1 12

1

3

1

32 2 2

1 12

11

3

1

16

21

4

0

2

4

6

8

10

12

14

16

18

Amdocs CDK Global GigacomSemiconductor

L&T Heavy SankalpSemiconductor

Wipro

1

2

1 1 1

2

1

4

1

2 2

7

1

2

1

0

1

2

3

4

5

6

7

8

ACT Corp CDK Global Ford L&T Construction UnitedHealth Group


140 | P a g e


FACULTY MEMBERS

SL Name & Specialization1 Prof. Kamalakanta Mahapatra ([email protected])

Professor , Ph.D. (IIT Kanpur) Power Electronics, Electronic Circuits & Design, VLSI Design, Embedded Systems, IOT for critical application



1 1 1 12

1 1 12

1

3

1

32 2 2

1 12

11

3

1

16

21

4

0

2

4

6

8

10

12

14

16

18

Amdocs CDK Global GigacomSemiconductor

L&T Heavy SankalpSemiconductor

Wipro

1

2

1 1 1

2

1

4

1

2 2

7

1

2

1

0

1

2

3

4

5

6

7

8

ACT Corp CDK Global Ford L&T Construction UnitedHealth Group


83

FACULTY MEMBERSSL Name & Specialization

1 Prof. Kamalakanta Mahapatra ([email protected])Professor , Ph.D. (IIT Kanpur) Power Electronics, Electronic Circuits & Design, VLSI Design, Embedded Systems, IOT for critical application



4 Prof. Santanu Kumar Behera ([email protected])Associate Professor , Ph.D. (Jadavpur)Microwave Engg., Microstrip Antenna, Active Integrated Antenna

5 Prof. Tarun Kumar Dan ([email protected])Associate Professor , M.Tech (IIT, Kharagpur) Instrumentation

6 Prof.(Mrs.) Poonam Singh ([email protected])Associate Professor , Ph. D. (IIT, Kharagpur)Wireless Communication

7 Prof. Umesh Chandra Pati ([email protected])Associate Professor , Ph.D. (IIT, Kharagpur) Digital Image Processing, Instrumentation

8 Prof. Debiprasad Priyabrata Acharya ([email protected])Associate Professor , Ph.D. (NIT Rourkela) Digital & Analog VLSI Design, Embedded Hardware & Software, Internet of Things, VLSI Signal Processing, Wireless Integrated Circuits

9 Prof. Samit Ari ([email protected])Assistant Professor , PhD (IIT, Kharagpur) Digital Signal Processing, Image Processing, Pattern Recognition, Biomedical Signal Processing, Computer Vision and Neural Network

10 Prof. Siddharth Deshmukh ([email protected])Assistant Professor, PhD. (Kansas State University USA) Wireless communication, Statistical Signal Processing, Optimization theory, Networked Controlled Systems

11 Prof. Manish Okade ([email protected])Assistant Professor, Ph.D. (IIT, Kharagpur), M.Tech (IIT, Kharagpur) Video Analysis, Image Forensics

12 Prof. Ajit Kumar Sahoo ([email protected])Assistant Professor , Ph.D. (NIT Rourkela) Digital Signal Processing, Radar Signal Processing, Evolutionary Computation, Neural Network

13 Prof. Lakshi Prosad Roy ([email protected])Assistant Professor , Ph.D. (IIT, Kharagpur) Detection and Estimation, DSP, Statistical Signal Processing, MIMO Radar technology, GPRProcessing and Telemedicine

14 Prof. Munshi Nurul Islam ([email protected])Assistant Professor , Ph.D. (IIT Kanpur)Semicondutor devices (modeling, characterization and fabrication), microelectronics, VLSI

15 Prof. Santos Kumar Das ([email protected])Assistant Professor, MS (IISc. Bangalore), Ph.D.(NIT Rourkela) Computer Networking, Sensor Networking, Optical Networking, Smartcard and Biometric technology

16 Prof. Sougata Kumar Kar ([email protected]) Assistant Professor, Ph.D.( IIT Kharagpur) Analog integrated circuit, Sensor interfacing circuits, Instrumentation, Biomedical circuit


84


17 Prof. Santanu Sarkar ([email protected]) Assistant Professor, MS. (IIT Kharagpur) VLSI, Analog and Mixed Signal Design, High Speed data Converter Design, and Radiation Hardening by Design

18 Prof. Subrata Maiti ([email protected])Assistant Professor , M Tech (IIT Kanpur) Radio frequency engineering, Electromagnetic modelling, inverse scattering, ground penetrating radar modelling, GPR signal processing

19 Prof. Ayas Kanta Swain ([email protected])Assistant Professor , M.Tech (NIT Rourkela) Network on Chip Design, VLSI Design and Embedded Systems

20 Prof. Upendra Kumar Sahoo ([email protected])Assistant Professor, Ph.D. ( NIT Rourkela) Digital Signal Processing

21 Prof. Shrishailayya Mallikarjunayya Hiremath ([email protected])Assistant Professor , M.Tech (NIT Rourkela)Wireless Communication with prospective signal processing cognitive radio, LTE (MIMO), WCDMA, Intelligent Signal Processing techniques (ANFIS, Neural Networks), DSP, Digital Communication

22 Prof. Banibrata Mukherjee, ( [email protected])Assistant Professor, Ph.D. ( IIT, Kharagpur )Electrostatically actuated MEMS and NEMS, Modeling, design and fabrication of microstructure, MEMS capacitive accelerometer.

23 Prof. Prashanth Vooka, ([email protected]) Assistant Professor, Ph.D.Capacitive Sensors, Signal-conditioning Circuits, Measurements and Instrumentation

PUBLICATION

Publications in Journals• Maiti, Subrata, Sarat Kumar Patra, and Amitabha Bhattacharya. “A Modified Plane Wave Model for Fast and Accurate

Characterization of Layered Media.” IEEE Transactions on Microwave Theory and Techniques (2017).

• Chithra, R., Robert Bestak, and Sarat Kumar Patra. “Efficient resource allocation for network-assisted multi-link device-to-device communication.” International Journal of Communication Systems 30, no. 7 (2017).

• Acharya, Aditya, and Sukadev Meher. “Efficient fuzzy composite predictive scheme for effectual 2-D up-sampling of images for multimedia applications.” Journal of Visual Communication and Image Representation 44 (2017): 156-186.

• Acharya, Aditya, and Sukadev Meher. “Composite high frequency predictive scheme for efficient 2-D up-scaling performance.” Multimedia Tools and Applications (2017): 1-37.

• MAHAPATRA, DHEEREN, Soumya Ray, and Lakshi Prosad Roy. “Maximum A Posteriori Based Texture Estimation by Despeckling of SAR Clutter Amplitude Data.” IET Image Processing (2017).

• MAHAPATRA, DHEEREN, and Lakshi Prosad Roy. “An Empirical Model for SAR Ground Clutter Data.” IET Signal Processing (2017).

• Pandey, Achala, and Umesh Chandra Pati. “Development of saliency-based seamless image compositing using hybrid blending (SSICHB).” IET Image Processing 11.6 (2017): 433-442.

• Nanda, Umakanta, and Debiprasad Priyabrata Acharya. “Adaptive PFD selection technique for low noise and fast PLL in multi-standard radios.” Microelectronics Journal 64 (2017): 92-98.

• Nayak, Debasish, Debiprasad Priyabrata Acharya, and Kamalakanta Mahapatra. “A read disturbance free differential read SRAM cell for low power and reliable cache in embedded processor.” AEU-International Journal of Electronics and Communications 74 (2017): 192-197.

• Nayak, Debasish, Debiprasad Priyabrata Acharya, and Kamalakanta Mahapatra. “Current Starving the SRAM Cell: A Strategy to Improve Cell Stability and Power.” Circuits, Systems, and Signal Processing 36.8 (2017): 3047-3070.

• Nanda, Umakanta, Debiprasad Priyabrata Acharya, and Sarat Kumar Patra. “Design of an efficient phase frequency detector to reduce blind zone in a PLL.” Microsystem Technologies 23.3 (2017): 533-539.


85

• R. K. Patjoshi, V. R. Kolluru, and K. Mahapatra, “Power quality enhancement using fuzzy sliding mode based pulse width modulation control strategy for unified power quality conditioner,” International Journal of Electrical Power & Energy Systems, vol. 84, pp. 153–167, 2017.

• V. K. Sharma and K. K. Mahapatra, “Mil based visual object tracking with kernel and scale adaptation,” Signal Processing: Image Communication, vol. 53, pp. 51–64, 2017.

• R. K. Patjoshi and K. Mahapatra, “High-performance unified power quality conditioner using non-linear sliding mode and new switching dynamics control strategy,” IET Power Electronics, 2017.

• A. Singh, A Amini, P. Singh, F. Marvasti, “A New Set of Codes with Low Complex Decoder for Overloaded Synchronous CDMA” IET Communications, Vol. 10, pp. 1236-1245, 2016.

• A. Singh, A Amini, P Singh, F Marvasti, “Twin Tree hierarchy: A Regularized approach to Construction for signature Matrices for overloaded CDMA” Wireless Communication and Mobile Computing (Wiley), Vol. 16, pp. 3070-3088, 2016.

• Anoop Kumar Mishra, Debmalya Mallick, and Poonam Singh, “Combined effect of RF impairment and CEE on the performance of dual-hop fixed-gain AF relaying,” IEEE Communications Letters, vol. 20, no. 9, pp. 1725–1728, Jun. 2016.

• Das, S. K., A. K. Samantray, and S. K. Patra. “Hybrid crosstalk aware Q-factor analysis for selection of optical virtual private network connection.” International Journal of Electronics 103, no. 1 (2016): 113-129.

• Maji, Pallab, Sarat Kumar Patra, and Kamalakanta Mahapatra. “Design of real-time reconfigurable fuzzy logic controller with M-FRHC rule reduction technique.” Journal of intelligent & fuzzy systems 30, no. 4 (2016): 1973-1986.

• Mohanty, Sanatan, and Sarat Kumar Patra. “Performance Evaluation of Quality of Service in IEEE 802.15. 4-Based Wireless Sensor Networks.” Handbook of Research on Advanced Wireless Sensor Network Applications, Protocols, and Architectures (2016): 213.

• Singh, Mangal, and Sarat Kumar Patra. “Partial Transmit Sequence Based Cuckoo Search Optimization for Peak-to-Average Power Ratio Reduction in Orthogonal Frequency Division Multiplexing Systems.” Journal of Computational Intelligence and Electronic Systems 5, no. 1 (2016): 28-34.

• Sahoo, S., K. V. Kiran, V. Kumar, D. Yadav, N. K. Barpanda, and Santos Kumar Das. “Quality Analysis in Phase Modulated Radio over Fiber in WDM/DWDM Network.” Journal of Optical Communications, DOI 10.1515/joc-2016-0060.

• Singh, Deepak, and Sukadev Meher. “Direction-adaptive fixed length discrete cosine transform framework for efficient H. 264/AVC video coding.” Signal Processing: Image Communication 48 (2016): 22-37.

• Singh, Deepak, and Sukadev Meher. “Direction-Adaptive Motion Estimation (DAME) for Efficient Video Compression.” IETE Technical Review 33.3 (2016): 231-243.

• Panda, Deepak Kumar, and Sukadev Meher. “Detection of moving objects using fuzzy color difference histogram based background subtraction.” IEEE Signal Processing Letters 23.1 (2016): 45-49.

• Locharla, Govinda Rao, Sudeendra Kumar Kallur, Kamala Kanta Mahapatra, and Samit Ari. “Implementation of MIMO data reordering and scheduling methodologies for eight-parallel variable length multi-path delay commutator FFT/IFFT.” IET Computers & Digital Techniques 10, no. 5 (2016): 215-225.

• Pandey, N., and L. P. Roy. “Convex optimisation based transmit beampattern synthesis for MIMO radar.” Electronics Letters 52.9 (2016): 761-763.

• Kumar, Sananda, A.K.Sahoo, U.K.Sahoo and D.P.Acharya. “QR-based robust diffusion strategies for wireless sensor networks using minimum-Wilcoxon-norm.” IET Signal Processing 10.5 (2016): 439-448.

• Kumar, Sananda, A.K.Sahoo, U.K.Sahoo and D.P.Acharya. “Diffusion minimum-Wilcoxon-norm over distributed adaptive networks: Formulation and performance analysis.” Digital Signal Processing 51 (2016): 156-169.

• Okade, Manish, and Prabir Kumar Biswas. “A novel moving object segmentation framework utilizing camera motion recognition for H. 264 compressed videos.” Journal of Visual Communication and Image Representation 36 (2016): 199-212.

• Okade, Manish, Gaurav Patel, and Prabir Kumar Biswas. “Robust Learning-Based Camera Motion Characterization Scheme With Applications to Video Stabilization.” IEEE Transactions on Circuits and Systems for Video Technology 26.3 (2016): 453-466.

• Padhee, Subhransu, Umesh Chandra Pati, and Kamalakanta Mahapatra. “Overview of High-Step-Up DC–DC Converters for Renewable Energy Sources.” IETE Technical Review (2016): 1-17.

• Pandey, Achala, and Umesh Chandra Pati. “A novel approach to multi-scale blending based on saliency mapping for multimedia image compositing applications.” Computers & Graphics 59 (2016): 93-106.

• Paul, Sourabh, and Umesh C. Pati. “Remote Sensing Optical Image Registration Using Modified Uniform Robust SIFT.” IEEE Geoscience and Remote Sensing Letters 13.9 (2016): 1300-1304.

• Sahu, Sangeeta, and Umesh Chandra Pati. “Intensity-based registration of medical images.” International Journal of Computational Vision and Robotics 6.4 (2016): 319-330.


86

• Mukherjee, Banibrata, K. B. M. Swamy, and Siddhartha Sen. “Dynamic characteristics of voltage induced reciprocated bending in double cantilever configuration of asymmetric comb drive MEMS.” Microsystem Technologies 22.5 (2016): 1089-1103.

• Vooka, Prashanth., and B. George. “Capacitance-to-digital converter for leaky capacitive sensors. “ Electronics Letters 52.6 (2016): 456-458.

• Nayak, Debasish, Debiprasad Priyabrata Acharya, and Kamalakanta Mahapatra. “An improved energy efficient SRAM cell for access over a wide frequency range.” Solid-State Electronics 126 (2016): 14-22.

• V. K. Sharma, S. Kumar, and K. K. Mahapatra, “Iterative and fully pipelined high throughput efficient architectures of AES in FPGA and ASIC,” Journal of Circuits, Systems and Computers, vol. 25, no. 05, p. 1650049, 2016.

• R. K. Patjoshi and K. Mahapatra, “Resistive optimization with enhanced PLL based nonlinear variable gain fuzzy hysteresis control strategy for unified power quality conditioner,” International Journal of Electrical Power & Energy Systems, vol. 83, pp. 352–363, 2016.

• K. S. Kumar, G. H. Rao, S. Sahoo, and K. Mahapatra, “Secure split test techniques to prevent ic piracy for iot devices,” Integration, the VLSI Journal, 2016.

• S. Padhee, U. C. Pati, and K. Mahapatra, “Overview of high-step-up dc-dc converters for renewable energy sources,” IETE Technical Review, pp. 1-17, 2016.

Publications in Conferences• A. Singh, P. Singh, A. Amini and F. Marvasti, “Comparison Aided Decoding (CAD) for a New set of Codes for Overloaded

Synchronous CDMA, “22nd IEEE NCC, IIT Guwahati, March, 2016.

• A. Singh, P. Singh, On the Complementary Nature of the Signature Matrices with orthogonal Subsets for Overloaded CDMA, “IEEE Region 10 Conference (TENCON), November, 2016, Singapore.

• Anoop Kumar Mishra, Debmalya Mallick, Mareesh Issar, and Poonam Singh, “Performance analysis of dual-hop DF relaying systems in the combined presence of CEE and RFI,” in Proc. IEEE COMSNETS, 2017, Bangalore, Jan, 2017.

• Mishra, Anoop Kumar, Sindhu CM Gowda, and Poonam Singh. “Impact of Hardware Impairments on TWRN and OWRN AF Relaying Systems with Imperfect Channel Estimates.” In Wireless Communications and Networking Conference (WCNC), 2017 IEEE, pp. 1-6. IEEE, 2017.

• R. Tiwari and S. Deshmukh, “Maximum likelihood estimator for velocity estimation in HetNets based on handoff count,” 9th International Conference on Communication Systems and Networks (COMSNETS), Bengaluru, India, 2017, pp. 152-157.

• D. Das and S. Deshmukh, “Ambiguity-region analysis for double threshold energy detection in cooperative spectrum sensing,” 9th International Conference on Communication Systems and Networks (COMSNETS), Bengaluru, India, 2017, pp. 123-127.

• Devendra Kumar Yadav, Pragyan Mishra, Kishan Kumar Patel and Santos Kumar Das, ‘Real Time Dynamic Relative Positioning of An Unmanned Ground Vehicle”, IEEE International INDIACom, pp. 449-453, 2017.

• R. Silambarasi, S. P. Sahoo, and Samit Ari, “3D Spatial-Temporal View Based Motion Tracing in Human Action Recognition,” in IEEE International Conference on Communications and Signal Processing (ICCSP), Chennai, India, Apr. 2017.

• N. Gupta, G. V. Pillai, and S. Ari, “Unsupervised Change Detection in Optical Satellite Images using Binary Descriptor,” in international Conference on Wireless Communications, Signal Processing and Networking (WiSPNET), Chennai, India, Mar. 2017.

• G. V. Pillai, N. Gupta, and S. Ari, “Descriptors based Unsupervised Change Detection in Satellite Images,” in IEEE International Conference on Communications and Signal Processing (ICCSP), Chennai, India, Apr. 2017.

• K. Mahapatra and K. C. Bhuyan, “Fuel cell for standalone application using fpga based controller,” in 3rd International Congress on Energy Efficiency and Energy Related Materials (ENEFM2015), pp. 267–275, Springer, 2017.

• S. B. Prusty, U. C. Pati, and K. K. Mahapatra, “Model based predictive control of the four tank system,” Springer, ICAEDC 2017.

• Nayak, Rashmiranjan, Subrata Maiti, and Sarat Kumar Patra. “Design and simulation of compact UWB Bow-tie antenna with reduced end-fire reflections for GPR applications.” In Wireless Communications, Signal Processing and Networking (WiSPNET), International Conference on, pp. 1786-1790. IEEE, 2016.

• Bhuyan, Snigdha, and Siddharth Deshmukh. “Decision boundary for underwater acoustic communication with generalized Gaussian noise model.” In Signal Processing and Communications (SPCOM), 2016 International Conference on, pp. 1-5. IEEE, 2016.

• Das, Sonia, Upanedra Kumar Sahoo, and Sukadev Meher. “Improving single view gait recognition using sparse representation based classification.” Technology Symposium (TechSym), 2016 IEEE Students’. IEEE, 2016.

• Mahapatra, Dheeren Ku, Soumya Shubhra Ray, and Lakshi Prosad Roy. “Despeckling of SAR clutter amplitude data using G 0-MAP filter.” Signal Processing and Communications (SPCOM), 2016 International Conference on. IEEE, 2016.


87

• Dalmia, Nandita, and Manish Okade. “A novel technique for misalignment parameter estimation in double compressed JPEG images.” Visual Communications and Image Processing (VCIP), 2016. IEEE, 2016.

• Dalmia, Nandita, and Manish Okade. “First quantization matrix estimation for double compressed JPEG images utilizing novel DCT histogram selection strategy.” Proceedings of the Tenth Indian Conference on Computer Vision, Graphics and Image Processing. ACM, 2016.

• Bhatia, Jaspreet, and Manish Okade. “A novel image enhancement technique based on statistical analysis of DCT coefficients for JPEG compressed images.” Communication (NCC), 2016 Twenty Second National Conference on. IEEE, 2016.

• Acharya, Pratima, Geetanjali Dumpa, and Tarun Kumar Dan. “Modelling and control of distillation column.” Computation of Power, Energy Information and Commuincation (ICCPEIC), 2016 International Conference on. IEEE, 2016.

• Dumpa, Geetanjali, Pratima Acharya, and Tarun Kumar Dan. “Comparative analysis of different control techniques for a distillation column.” Computation of Power, Energy Information and Commuincation (ICCPEIC), 2016 International Conference on. IEEE, 2016.

• Kumar, Praveen, and Umesh Chandra Pati. “Arduino and Raspberry Pi based smart communication and control of home appliance system.” Green Engineering and Technologies (IC-GET), 2016 Online International Conference on. IEEE, 2016.

• Padhee, Subhransu, Umesh Chandra Pati, and Kamalakanta Mahapatra. “Design of photovoltaic MPPT based charger for lead-acid batteries.” Emerging Technologies and Innovative Business Practices for the Transformation of Societies (EmergiTech), IEEE International Conference on. IEEE, 2016.

• Padhee, Subhransu, Umesh Chandra Pati, and Kamalakanta Mahapatra. “Comparative analysis of DC-DC converter topologies for fuel cell based application.” Power Electronics, Intelligent Control and Energy Systems (ICPEICES), IEEE International Conference on. IEEE, 2016.

• Kumar, Praveen, and Umesh Chandra Pati. “IoT based monitoring and control of appliances for smart home.” Recent Trends in Electronics, Information & Communication Technology (RTEICT), IEEE International Conference on. IEEE, 2016.

• Ingale, Ganesh Baliram, Subhransu Padhee, and Umesh C. Pati. “Design of standalone PV system for DC-micro grid.” Energy Efficient Technologies for Sustainability (ICEETS), 2016 International Conference on. IEEE, 2016.

• Padhee, Subhransu, et al. “Design of an educational laboratory for measurement and data acquisition system.” Electrical, Electronics and Computer Science (SCEECS), 2016 IEEE Students’ Conference on. IEEE, 2016.

• Padhee, Subhransu, Umesh Chandra Pati, and Kamalakanta Mahapatra. “Modelling switched mode DC-DC converter using system identification techniques: A review.” Electrical, Electronics and Computer Science (SCEECS), 2016 IEEE Students’ Conference on. IEEE, 2016.

• Durgam, Ujwal Kumar, Sourabh Paul, and Umesh C. Pati. “SURF based matching for SAR image registration.” Electrical, Electronics and Computer Science (SCEECS), 2016 IEEE Students’ Conference on. IEEE, 2016.

• Prusty, Sankata B., S. Seshagiri, Umesh C. Pati, and Kamala K. Mahapatra. “Sliding mode control of coupled tanks using conditional integrators.” In Control Conference (ICC), 2016 Indian, pp. 146-151.IEEE, 2016.

• Bhati, Satish H., and Umesh C. Pati. “Phase Correlation Based Algorithm Using Fast Fourier Transform for Fingerprint Mosaicing.” Proceedings of 3rd International Conference on Advanced Computing, Networking and Informatics. Springer India, 2016.

• Pandey, Achala, and Umesh C. Pati. “Panoramic Image Mosaicing: An Optimized Graph-Cut Approach.” Proceedings of 3rd International Conference on Advanced Computing, Networking and Informatics. Springer India, 2016.

• Singh, Amiya, Poonam Singh, Arash Amini, and Farokh Marvasti. “Twin tree hierarchy: a regularized approach to construction of signature matrices for overloaded CDMA.” Wireless Communications and Mobile Computing 16, no. 17 (2016): 3070-3088.

• Kondala Rao, J., and Manish Okade. “Role of Hyperbox Classifiers for Color Recognition.” (2016).

• Khandagale, Sachin, and Santanu Sarkar. “A 6-Bit 500 MSPS segmented current steering DAC with on-chip high precision current reference.” In Computing, Communication and Automation (ICCCA), 2016 International Conference on, pp. 982-986. IEEE, 2016.

• A. K. Swain, K. R. Babu, S. N. Satpathy, and K. K. Mahapatra, “FPGA prototyping and parameterised based resource evaluation of network on chip architecture,” in Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER), IEEE, pp. 227–231, IEEE, 2016.

• S. R. Sahoo, S. Kumar, K. Mahapatra, and A. Swain, “A novel aging tolerant ro-puf for low power application,” in Nanoelectronic and Information Systems (iNIS), 2016 IEEE International Symposium on, pp. 187–192, IEEE, 2016.


88

• A. K. Swain, A. K. Rajput, and K. Mahapatra, “Parametric performance analysis of synchronous and asynchronous heterogeneous network on chip,” in Nanoelectronic and Information Systems (iNIS), 2016 IEEE International Symposium on, pp. 108–112, IEEE, 2016.

• R. K. Patjoshi and K. Mahapatra, “High-performance unified power quality conditioner using command generator tracker-based direct adaptive control strategy,” IET Power Electronics, vol. 9, no. 6, pp. 1267-1278, 2016.

• P. Meher and K. K. Mahapatra, “High-performance noise tolerant comparator design for arithmetic circuits,” in Intelligent Signal Processing and Communication Systems (ISPACS), 2016 International Symposium on, pp. 1–4, IEEE, 2016.

• N. Satheesh, A. Mahapatra, S. Kumar, S. Sahoo, and K. Mahapatra, “A modified ro-puf with improved security metrics on fpga,” in Nanoelectronic and Information Systems (iNIS), 2016 IEEE International Symposium on, pp. 178–181, IEEE, 2016.

• V. R. Nandyala and K. K. Mahapatra, “A circuit technique for leakage power reduction in cmos vlsi circuits,” in VLSI Systems, Architectures, Technology and Applications (VLSI-SATA), 2016 International Conference on, pp. 1–5, IEEE, 2016.

• K. Sudeendra Kumar, N. Satheesh, A. Mahapatra, S. Sahoo, and K. Mahapatra, “Securing IEEE 1687 standard on-chip instrumentation access using PUF,” 2016.

• G. T. Varghese and K. Mahapatra, “A low power reconfigurable encoder for flash ADCS,” Procedia Technology,Elsivier, vol. 25, pp. 574–581, 2016.

• B. R. Jammu, P. Pati, S. Patra, and K. Mahapatra, “FPGA implementation of rule optimization for stand-alone tunable fuzzy logic controller using GA,” Complex & Intelligent Systems, vol. 2, no. 2, pp. 83–98, 2016.

• Aishwarya Kumari and Debiprasad Priyabrata Acharya, “Reduced Latency Square root Calculation for Signal Processing using Radix-4 Hyperbolic CORDIC”, International Conference on Advanced Computing, Networking and Informatics 2017.

Paper Accepted for Publication• Jyoti P. Patra, Poonam Singh, “An Optimal low complexity LMMSE channel estimator for OFDM system” in Proc. IEEE VTC-

fall, 2017, Montreal,Canada, Sep, 2017. (Accepted).

• Anoop Kumar Mishra, Sindhu C. M. Gowda and Poonam Singh, “On the effect of Hardware Impairments on Two way relay networks with Imperfect Channel Estimates,” in Proc. IEEE VTC-Fall, 2017, Montreal,Canada, Sep, 2017. (Accepted).

• Anoop Kumar Mishra, Debmalya Mallick, Sindhu C. M. Gowda and Poonam Singh, “Outage performance of Variable gain AF Relaying systems in the combined presence of HWI and ICE: Analysis and Comparison,” in Proc. IEEE VTC-Fall, 2017, Montreal,Canada, Sep, 2017. (Accepted).

• Dheeren Ku Mahapatra and Lakshi Prosad Roy, “Empirical Model for SAR Ground Clutter Data,” IET Signal Processing. (Accepted, In Press, DOI: 10.1049/iet-spr.2016.0351).

• Dheeren Ku Mahapatra, Soumya Shubhra Ray and Lakshi Prosad Roy, “Maximum A Posteriori Based Texture Estimation by Despeckling of SAR Clutter Amplitude Data,”. IET Image Processing. (Accepted, In Press, DOI: 10.1049/iet-ipr.2017.0344).

• S. Kundu, and S. Ari, “P300 detection with brain-computer interface application using PCA and ensemble of weighted SVMs,” IETE Journal of research, 2017 (Accepted).

Books / Book Chapter• N Prasad, Manas RanjanTripathy, Ansuman Dipti Sankar Das, Nihar Ranjan Behera, Ayaskanta Swain. “Efficient VLSI

Implementation of CORDIC-Based Direct Digital Synthesizer”, pp.597-603, Springer.

• Hiremath, Shrishail, Amit Kumar Mishra, and Sarat Kumar Patra. “Engineering Review of the IEEE 802.22 Standard on Cognitive Radio.” White Space Communication. Springer International Publishing, 2015. 1-31.

• M. Das, S. Ari, D. K. Ghosh, Analysis of ECG Denoising, LAP LAMBERT Academic Publishing, 2016, ISBN-10: 3659790869, ISBN-13: 978-3659790867.

Patent


By Faculty:

By Students:


89

Technical Association / SocietiesFaculty Name MembershipProf. K.K. Mahapatra 1. Senior Member IEEE (USA)

2. Fellow; Institute of Engineers (India) 3. Life member; Indian Society of Technical Education, India (ISTE)Acted as track Chair for IEEE INIS Conference for “Hardware Security” track held in Dec 2015 at Indore.Presently acting as track Chair for IEEE INIS Conference for “Hardware Security” track to be held in Dec-2016 at Gwalior.

Prof. Sarat Kumar Patra 1. Senior Member IEEE (USA) 2. Life Member; Institute of Electronic and telecommunication Engineers, India (IETE) 3. Life Member; Institute of Engineers (India) 4. Life Member; Compute Society of India 5. Life member; Indian Society of Technical Education, India (ISTE)

Prof. Poonam Singh 1. Life Member of ISTE 2. Senior Member of IEEE 3. Member of IEEE Communications Society4. Member of selection Committee of UPSC5. Editorial Board Member of Journal of Communications, Science PG, International Journal of Signal and Imaging Systems Engineering, 6. Reviewer of International Journal of Communications, Science PG Journal of The Institution of Engineers (India), Academicians' Research Center (ARC), International Journal of Signal and Imaging Systems Engineering, InderScience Publication, IEEE Communications Letters 7. Served as a member of technical program committee of many conferences including IEEE SPICES 2015, ICAECC - 2014, ICCAIS-2014, CODIS 20128. Chaired sessions at IEEE CCNC, 2008, Las Vegas, US, ICCCS- 2011, NIT Rourkela.

Prof. Umesh Chandra Pati Reviewer, IET Image Processing, EURASIP Journal on Advances in Signal Processing, International Journal of Distributed Sensor Networks, Hindawi, International Journal of Computational Vision and Robotics, Inderscience, Advances in Computer Engineering, Hindawi, Guest Editor, International Journal of Signal and Imaging Systems Engineering, Editor, International Journal of Emerging Trends in Electrical and Electronics, Advisory Board Member, International Journal of Advanced Computer Research, Reviewer, Virtual Instrumentation using LabVIEW, Sanjay Gupta and Joseph John, 2nd Edition, Tata McGraw Hill, New Delhi, Reviewer, Optical Fiber Communication, Optical Fiber Communication, Cambridge University Press India, Member of National Advisory Committee, ICACC 2011, Member of International Program Committee , DICTAP 2012, Reviewer, SCES-2012, ICICS 2011, Member of Program Committee, SocProS 2011, WICT 2011

Prof. Debiprasad Priyabrata Acharya

Professional Membership in IETEMember VLSI Society of India

Prof Ajit Kumar Sahoo Professional Membership IEEE.Dr.Santanu Kumar Behera 1.Senior Member: Institute of Electrical and Electronics Engineers(IEEE)

2. Member: Institution of Engineering and Technology(IET)3. Fellow: Institution of Electronics and Telecommunication Engineers(IETE)4. Fellow: Institute of Engineers (IE)5. Member: Computer Society of India(CSI)6. Member: Indian Society for Technical Education(ISTE)7. Member: Society of EMC Engineers(SEMCEI)8. Faculty Serving In IEEE AEMC-2013, Bhubaneswar9. Faculty Serving inICICS-2011, Singapore10. Faculty serving in Editorial Board STM-Journal of Microwave Engg and Technologies

Dr. Samit Ari Professional Membership IEEE, IEEE Signal Processing SocietyProf. Sidharta Deshmukh 1.Institute of Electrical and Electronics Engineers (IEEE)

2.IEEE Communications Society3.IEEE Signal Processing Society

Prof. Manish Okade Professional Membership IEEE.Dr. Santanu Sarkar Professional Membership IEEE, IEEE Circuit and System Society.Dr. Santos Kumar Das 1.Professional Membership IEEE, IEEE Optical communication Society,

2. Reviewer of AITIJ Journal article3. Editorial Board Member of AITIJ Journal


90

Faculty Name MembershipDr. Banibrata Mukherjee IEEE Professional Membership, IEEE Instrumentation and Measurement societyDr. Subrata Maiti Professional Membership IEEE.

S. Hiremath Professional Membership IEEE.A. K. Swain Professional Membership IEEE.

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERSSL Event Date, year Sponsoring agencies1. Towards 5G networks (In collaboration with Prof

Robert Bestak, CTU, Prague under GIAN scheme of Sep 2016 (2 weeks) MHRD, India

2. Short term course on “Design and Simulation of Antennas & Microwave Devices-2016”

June01-08,2016 Self-financed

3. Short term course on Micro sensors and Signal Conditioning (MSSC-2016)

24th - 25th September 2016, Dept. of EC, NIT Rourkela(Prof.B. Mukherjee)

TEQIP-II



Special Manpower Development Program – Chip to System Design (SMDP-C2SD) (5yrs)

Deity, GOI Prof. K. K. Mohapatra

147 2015 2019

FPGA based standalone tunable Fuzzy Logic

Controller module (4 Yrs)

BRFST, Ahmedabad

CARS project on Design and testing of BASEBAND and RF front end for IEEE802.15.4 zigbee Standard (2 Yrs)

Anurag

DRDO

Prof S K Patra 7.5

Technical and Functional Testing of the customized GAGAN Enabled GPS PDAs of forest Department

(1 yr)

Govt of

Odisha, India

Prof S K Patra

(Consultancy project)

1.78

Development of a Hand Gesture Based Interface System for Remote Controlled Surveillance Mobile Robot

(3 yrs)

DRDO Dr. Samit Ari 28.598 2016 2019

Development of a Brain controlled Robotic wheel chair for Amyotrophic Lateral Sclerosis (ALS) patient

(5 yrs)

Young Faculty Research

Fellowship award, Visvesvaraya

PhD Scheme for Electronics & IT,

DeitY

Dr. Samit Ari 37 2016 2019

Development of Advanced Holter Monitor with extended recording and episode detection

(3 yrs)

IMPRINT INDIA Project, MHRD, Govt. of India

Dr. Samit Ari 16.8 2017 2020


91

Name of the Project Sponsoring Agency Name of the PI Total Value (Rs. in Lakhs)


Role of camera motion cue in determining visual saliency and its applications to surveillance using TI DaVinci vision board.(3 years)

SERB, DST Dr. Manish Okade

24 2016 2019

Low Power Analog Front-end ASIC for Portable Bio-potential Acquisition Systems.

(3 Years )

SERB, DST Dr. Sougata Kumar Kar

18.46 2016 2019

Application of Cognitive Radio Technology for Smart Grid Communication

(3 yrs)

SERB, DST Dr Siddharth Deshmukh

18.85 2016 2019

Embedded System for Real Time Mine Process Monitoring

(2 Yrs)

Jindal Steel and Power Ltd

Prof D.P.Acharya 12

Design and Syntheis of 32-bit ALU and High Speed IO (2 Yrs)

Sankalp Semiconductors

Prof D.P.Acharya 3

Embedded System for Compressed Air Consumption Monitoring in Smelter Plant. (2 Yrs )

NALCO Prof D.P.Acharya 31

Design of FSO Link for high quality connection set-up in wireless optical network

(5 yrs)

Visvesvaraya PhD Scheme for Electronics & IT,

DeitY

Prof. S. K. Das 30 2016

Intelligent Surveillance Data Retriever (ISDR) for Smart city Applications.

(3 yrs)

DST (IMPRINT).

(Approved)

Prof. S. K. Das 386 2017

Development of Self-Powered MEMS Accelerometer using Piezoelectric Energy Harvester

DST Dr. Banibrata Mukherjee

37.24 2017 2020



92



Name of the Coordinator Total Value (Rs. in Lakhs)


FIST DST Prof. U. C. Pati 64 Jan 2012 Jan 2017SMDP (C2SD) DEITY Prof. K.K. Mahapatra and Prof. A

K Swain147 Dec 2014 Mar 2020

Visvesvaraya PhD Scheme

DEITY Prof. Santosh K Das and Prof. Samit Ari

60 Aug 2015 Aug 2020

LIST OF LABORATORIES DEVELOPED SL Name of the Laboratories

1. Ground Penetrating Laboratory

2. Intelligent Systems Laboratory

3. IOT Development Centre

4. Communication Network lab


Subrata Maiti Analytical Modelling of Ultra-Wide Band Ground Penetrating Radar for Characterization of Subsurface Media

Prof. S.K. Patra

&

Prof. Amitabha BhattacharyaGopi Krishna Saramekala Modeling and Simulation of Subthreshold

Characteristics of Short-Channel Fully-Depleted Recessed-Source/Drain SOI MOSFETs

Prof. P.K.Tiwari

R. Chithra Interference cancellation and Resource Allocation approaches for Device-to-Device Communications

Prof. S.K. Patra & Prof. I.R. Bestak

Dipak Kumar Ghosh A Framework for Vision-based Static Hand Gesture Recognition

Prof. S. Ari

Venkata Ratnam Kolluru Design and Development of FPGA based Controllers for Photovoltaic Power System

Prof. K. K. Mahapatra and Prof. B. Subudhi

Pallabi Maji On Design and Implementation of Generic Fuzzy Logic Controllers

Prof. S. K. Patra & Prof. K.K. Mahapatra

Umakanta Nanda Design Techniques of Energy Efficient PLL for Enhanced Noise and Lock Performance

Prof. D. P. Acharya & Prof.S. K. Patra


93

Name of the Student Title of Thesis Supervisor

Prasanta Kumar Pradhan On Efficient Signal Processing Algorithms for Signal Detection and PAPR Reduction in OFDM Systems

Prof. S.K.Patra

Amiya Singh Hierarchy Based Construction of Signature Matrices for Simplified Decoding in Overloaded CDMA

Prof. P. Singh

Deepak Singh Fast and Efficient Foveated Video Compression Schemes for H.264/AVC Platform

Prof. S. Meher


Department of ELECTRICAL ENGINEERING


159 | P a g e





6570

35

16

0

10

20

30

40

50

60

70

80

B.Tech. M.Tech (2 Years) M.Tech. dual (5Years)

M.Tech.(Res.) Ph.D.

243

136161

0

50

100

150

200

250

300



94


159 | P a g e





6570

35

16

0

10

20

30

40

50

60

70

80

B.Tech. M.Tech (2 Years) M.Tech. dual (5Years)

M.Tech.(Res.) Ph.D.

243

136161

0

50

100

150

200

250

300



160 | P a g e

FACULTY

Sl. No. Name & Specialization1. Prof. J.K. Satapathy([email protected])

Professor,Phd (Bradford)Power Electronics and Drives

2. Prof. Anup Kumar Panda([email protected])Professor & HOD, PhD (Utkal University)Power Electronics and Drives

3. Prof. K.B. Mohanty([email protected])Associate Professor, PhD (IIT Kharagpur)Power Electronics and Drives

4. Prof. Susmita Das([email protected])Associate Professor, PhD (NIT Rourkela) Electronics System and Communication

5. Dr. Somnath Maity([email protected])Assistant Professor, PhD(IIT Kharagpur), Postdoc (Ben Gurion University)Control System

6. Dr. Susovon Samanta([email protected])Assistant Professor, PhD(IIT Kharagpur)Control System

7. Dr. Subrata Karmakar([email protected])Assistant Professor, PhD (NIT Durgapur)Power System

8. Dr. Gopalakrishna Srungavarapu([email protected])Assistant Professor, PhD (IIT Madras)Power System

9. Dr. Monalisa Pattnaik([email protected])Assistant Professor, PhD(IIT Kharagpur)Power Electronics & Drives

10. Dr. Asim Kumar Naskar([email protected])Assistant Professor, ME (Jadavpur)Control and Automation

11. Dr. Ananyo Sengupta([email protected])

31 2 2

10

31 1 2 2 3

1

4

1 1 2 31 1 1

42 3 4

2 1

42

4

20

1

6

1

0

5

10

15

20

25

3SC Solutions CDK Global Indian OilCorporation Ltd.

(IOCL)

Lafarge Saint Gobain TCS

FACULTYSl. No. Name & Specialization1. Prof. J.K. Satapathy([email protected])

Professor,Phd (Bradford)Power Electronics and Drives

2. Prof. Anup Kumar Panda([email protected])Professor & HOD, PhD (Utkal University)Power Electronics and Drives

3. Prof. K.B. Mohanty([email protected])Associate Professor, PhD (IIT Kharagpur)Power Electronics and Drives

4. Prof. Susmita Das([email protected])Associate Professor, PhD (NIT Rourkela) Electronics System and Communication

5. Dr. Somnath Maity([email protected])Assistant Professor, PhD(IIT Kharagpur), Postdoc (Ben Gurion University)Control System

6. Dr. Susovon Samanta([email protected])Assistant Professor, PhD(IIT Kharagpur)Control System


95

7. Dr. Subrata Karmakar([email protected])Assistant Professor, PhD (NIT Durgapur)Power System

8. Dr. Gopalakrishna Srungavarapu([email protected])Assistant Professor, PhD (IIT Madras)Power System

9. Dr. Monalisa Pattnaik([email protected])Assistant Professor, PhD(IIT Kharagpur)Power Electronics & Drives

10. Dr. Asim Kumar Naskar([email protected])Assistant Professor, ME (Jadavpur)Control and Automation

11. Dr. Ananyo Sengupta([email protected])Assistant Professor, MTech (IIT Kharagpur)Power System

12. Dr. Supratim Gupta([email protected])Assistant Professor, PhD(IIT Kharagpur)Electronics and System Communication

13. Dr. Paresh Govind Kale([email protected])Assistant Professor, PhD(IIT Mumbai)Power System

14. Dr. Venkata Ramana Naik N,Power Electronics and Drives

PUBLICATION

Publications in Journals• A. K. Panda, Tejavathu Ramesh, and S. Shiva Kumar. “Rotor-Flux based MRAS Speed Estimator for DTFC-SVM of a Speed

Sensorless Induction Motor Drive Using Type-1 and Type-2 Fuzzy Logic Controllers Over a Wide-range of Speed Operation” International Transactions on Electrical Energy Systems, DOI: 10.1002/etep.2181, December2015.

• S. Shiva Kumar, A.K. Panda and Tejavathu Ramesh, “Reduction of Losses and Efficiency Enhancement of a ZVT-ZCT PWM Synchronous Buck Converter with a Simple Passive Auxiliary Circuit,” Electric Power Component and Systems, vol. 43, no. 16, pp: 1803-1812, Aug 2015.

• Anup Kumar Panda, S. Shiva Kumar and Tejavathu Ramesh, “Zero Voltage Transition- Zero Current Transition pulse-width modulated Synchronous Buck Converter with an Active Auxiliary Circuit for Portable Applications,” IET Power Electron., vol. 09, no. 04, pp: 631-638, March 2016.

• Anup Kumar Panda, S. Shiva Kumar and Tejavathu Ramesh, “A novel active auxiliary circuit for efficiency enhancement integrated with synchronous buck converter,” International Journal of Circuit theory and Applications, DOI: 10.1002/cta.2208.

• Amiya Naik, Anup Kumar Panda and Sanjeeb Kumar Kar, “Improving the Dynamic Response during Field Weakening Control of IPMSM Drive System using Adaptive Hysteresis Current Control Technique”International Journal of Emerging Electric Power Systems, Vol.17, Issue.3, June 2016,DOI 10.1515/ijeeps-2015-0078.

• J. Dalei, K. B. Mohanty, “An approach to improve the performance of three-phase self-excited induction generator feeding an induction motor load using Hilbert Transform and Coordinate Rotation Digital Computer,” Electric Power Components and Systems, vol. 44, no. 14, 2016, pp. 1551–1563.

• J. Dalei, K. B. Mohanty, “Fault classification in SEIG system using Hilbert-Huang transform and least square support vector machine,” International Journal of Electrical Power and Energy Systems, vol. 76, 2016, pp. 11-22.

• J. Dalei, K. B. Mohanty, “An approach to estimate and control SEIG voltage and frequency using CORDIC algorithm,” Transactions of the Institute of Measurement and Control, published on December 23, 2015 as doi:10.1177/0142331215621374.

• S. D. Swain, P.K. Ray, K. B. Mohanty, “Design of passive power filter for hybrid series active power filter using estimation, detection and classification method,” International Journal of Emerging Electric Power Systems, January 2016, DOI: 10.1515/ijeeps-2015-0190.

• J. Dalei, K. B. Mohanty, “Performance improvement of three-phase self excited induction generator feeding induction motor load,” Turkish Journal of Electrical Engineering & Computer Sciences, vol. 23, no. 6, 2015, pp. 1660-1672.

• Hussain K and Subrata Karmakar, Dissolve Gas Analysis of Aged Transformer Oil: A case Study, Journal of Electrical Engineering, Vol. 15 , No. 2, pp. 1-10, 2015.


96

• A. K. Naskar, S. Patra, S. Sen, “Reconfigurable direct control allocation for multiple actuator failures,” IEEE Transactions on Control System Technology, vol. 23, no. 1, pp. 397-405, 2015.

• A. K. Naskar, S. Patra, S. Sen, “A control theoretic approach for solving underdetermined problems and its application to control allocation,” Journal of Dynamic Systems, Measurement, and Control, vol. 138, no. 4, pp. 044501-044501-6, 2016.

• A. Sengupta, S. Mukhopadhyay and A. K. Sinha, “Automated Verification of Power System Protection Schemes -Part I: Modelling and Specifications”, IEEE Transactions on Power Delivery, Vol. 30, No. 5, pp. 2077 - 2086, 2015.

• A. Sengupta, S. Mukhopadhyay and A. K. Sinha, “Automated Verification of Power System Protection Schemes - Part II: Test Case Generation using Swarm Intelligence”, IEEE Transactions on Power Delivery, Vol. 30, No. 5, pp. 2087 - 2095, 2015.

• M. Killi and S. Samanta*, “Modified Perturb and Observe MPPT Algorithm for Drift Avoidance in Photovoltaic Systems,” IEEE Transactions on Industrial Electronics, , vol. 62, no. 9, pp.5549-5559, Sep. 2015.

• M. Killi and S. Samanta*, “An Adaptive voltage sensor based MPPT for Photovoltaic Systems with SEPIC Converter including steady sate and drift analysis,” IEEE Transactions on Industrial Electronics, , vol. 62, no. 12, pp.7609-7619, Dec. 2015.

• Tarai R.K. and Kale P , “Validation of Predictive Models to Estimate Annual PV Production: A case study of Odisha,” International Journal of Smart Grid and Clean Energy, Vol.5 No.3, pp 160-167, 2016.

• “BizCard – An Android Application to Automate the Process of Information Retrieval from Business Cards”, SwayanJeet Mishra and Paresh G. Kale , IRACST – Engineering Science and Technology: An International Journal (ESTIJ), ISSN: 2250-3498 Vol.6, No.2, pp 60-68, Mar-Apr 2016.

• Development of Rasterized Map using PVGIS for Assessment of Solar PV Energy Potential of Odisha, RakeshTarai, Paresh Kale, International Journal of Renewable Energy Research-IJRER, 2016, Vol 6 , No 1, pp 61-73.

• S Maity, P Sahu, Modeling and Analysis of a Fast and Robust Module-Integrated Analog Photovoltaic MPP Tracker, IEEE Transactions on Power Electronics, vol. 30, No. 1, Jan., 2016.

• Y. Su, C. Lin, T. Yang, R. Huang, W.Chen, K. H.Chen, S. Maity, “CCM/GM Relative Skip Energy Control and Bidirectional Dynamic Slope Compensation in Single-inductor Multiple-output DC-DC Converter for Wearable Device Power Solution” IEEE Transactions on Power Electronics , vol. 31, No. 8, Jan., 2016.

• N. Venkataramana Naik, Aurobinda Panda and S. P. Singh, “A Three-Level Fuzzy-2 DTC of Induction Motor Drive Using SVPWM,” IEEE Trans. Ind. Electron, vol. 63, no. 3, pp. 1467-1479, Mar. 2016.

• N. Venkataramana Naik, Jose Thankachan, and S. P. Singh, “A Neuro-Fuzzy Direct Torque Control Using Bus-Clamped Space Vector Modulation,” IETE Technical Review, pp. 1-13, vol. 33 , no. 2, 2016.

• N. Venkataramana Naik, Aurobinda Panda and S. P. Singh, “A Comparative Analytical Performance of Fuzzy-2 DTC and PIDTC of Induction Motor Using DSPACE DS-1104,” IEEE Trans. Ind. Electron, vol.62, no.12, pp.7350-7359, Dec. 2015.

• Bagadi, Kala Praveen, Visalakshi Annepu, and Susmita Das. “Recent trends in multiuser detection techniques for SDMA–OFDM communication system.” Physical Communication 20 (2016): 93-108.

• Das, Deepa, and Susmita Das. “Optimal resource allocation for soft decision fusion-based cooperative spectrum sensing in cognitive radio networks.” Computers & Electrical Engineering, Volume 52 Issue C, May 2016 ,Pages 362-378.

• Rout, Deepak Kumar, and Susmita Das. “Hybrid Relaying in Ultra-wideband Body Area Networks.” Wireless Personal Communications 86.2 (2016): 435-449.

• Deepa Das and Susmita Das, “A survey on spectrum sensing for cognitive radio”, Wireless and Personal Communication, Springer.

• Deepak Kumar Rout, Kiran Kumar Gurrala and Susmita Das, “Performance of amplify forward and decode forward cooperative strategies for body surface communications in UWB Body Area Networks” International Journal of Communication System, Wiley.

• Kiran Kumar Gurrala and Susmita Das, “Maximized Channel Capacity Based Power Allocation Technique for Multi Relay Hybrid Decode-Amplify-Forward Cooperative Network” Wireless Personal Communication (Springer) ( manuscript id WIRE-D-14-0137).

• Deepak Kumar Rout and Susmita Das, “Narrowband Interference Mitigation in UWB BAN using Hermite Pulse”, International Journal of Electronics, Taylor and Francis (Accepted manuscript id TETN-2014-0691.R2).

• Kiran Kumar G, Susmita Das,”Hybrid Decode Amplify Forward Relaying in Distributed Alamouti Coded Cooperative Network”, International Journal of Electronics, Taylor and Francis, 102(5), 725-741, 2015. DOI:10.1080/00207217.2014.938252.

• Kiran Kumar Gurrala, Susmita Das, “Performance study of hybrid decode–amplify–forward (HDAF) relaying scheme for physical layer security in wireless cooperative network”,DOI: 10.1002/dac.3182.

Publications in Conferences• K. B. Mohanty, and S. Pati, “Voltage Profile Improvement of Micro-grids using SMC based STATCOM,” 10th Annual IEEE Int.

Systems Conference, April 18-21, 2016, Orlando, pp. 636-643.


97

• K. B. Mohanty, and S. Pati, “Fuzzy Logic Controller based STATCOM for Voltage Profile Improvement in a Micro-Grid,” 10th Annual IEEE Int. Systems Conference, April 18-21, 2016, Orlando, pp. 853-858.

• S. Pati, K. B. Mohanty, S. K. Kar and S. Mishra, “Voltage and frequency control of a micro-grid using a fuzzy logic controller based STATCOM equipped with battery energy storage system,” IEEE Int. Conf. Circuits, Power and Computing Technologies, March 2016, Kanyakumari.

• S. Pati, S. K. Kar, K. B. Mohanty and S. Mishra, “A sliding mode controller based STATCOM with battery storage for voltage and frequency stabilization in a micro-grid,” IEEE Int. Conf. Circuits, Power and Computing Technologies, March 2016, Kanyakumari.

• A. Mohapatra, B. K. Nayak, and K. B. Mohanty, “Performance improvement in MPPT of SPV system using NN controller under fast changing environmental condition,” IEEE 6th Int. Conf. on Power Systems, 4-6 March, 2016, New Delhi.

• J. Dalei, K. B. Mohanty, S. Singh, G. S. Garain, “Fuzzy PI controller for improved voltage regulation in STATCOM based SEIG,” IEEE INDICON, Dec. 2015, New Delhi.

• R. N. Mishra and K. B. Mohanty, “Performance enhancement of a linearized induction motor drive using ANFIS based torque controller,” IEEE INDICON, Dec. 2015, New Delhi.

• S. D. Swain, P. K. Ray, K. B. Mohanty, “Space vector modulated hybrid series active filter for harmonic compensation,” IEEE INDICON, Dec. 2015, New Delhi.

• S. D. Swain, P. K. Ray, K. B. Mohanty, “A real time study of hybrid series active power filter for power quality improvement,” IEEE Int. Conf. on Power Electronics, Intelligent Control and Energy Systems (ICPEICES), 4-6 July 2016, New Delhi.

• Hussain K and Subrata Karmakar, “Incipient Fault Diagnosis in Oil-field Power Transformers using Fourier Transform Infrared Spectroscopy”, International Conference on High Voltage Engineering and Technology (ICHVT-2015), Hyderabad, 23rd -30th January, 2015.

• Hussain K and Subrata Karmakar, “Incipient Fault Diagnosis of Power Transformers using Optical spectro-photometric Technique”, International Conference on Optics and Photonics (ICOP-2015), Kolkata, 20th -22nd February, 2015.

• S. Karmakar and S. Mishra, “Detection of partial discharges and its effect on solid insulation used in high voltage cable”, 2015 International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), pages 204 - 208, CPRI Bangalore, December 10th-12th, 2015. DOI: 10.1109/CATCON.2015.7449535.

• S. Karmakar, “On Line Detection Of Partial Discharge In High Voltage Equipment Using Acoustic Emission Technique”, The 19th International Symposium on High Voltage Engineering, Pilsen, Czech Republic, August, 23 – 28, 2015.

• Himadri Lala and Subrata Karmakar, “Continuous Wavelet Transform and Artificial Neural Network Based Fault Diagnosis in 52 bus Hybrid Distributed Generation System”, IEEE Students Conference on Engineering and Systems (SCES), MNIT, Allahabad, November 6-8, 2015.

• A. K. Naskar, S. Patra, S. Sen, “A reconfigurable direct control allocation method,” European Control Conference, Zurich, July, 2013.

• A. K. Naskar, S. Patra, S. Sen, “Disturbance attenuation problem for over actuated systems with actuator saturation: A control allocation based approach,” Mediterranean Control Conference, Torremolinos, June, 2015.

• J Mishra, M Pattnaik, S Samanta , “Performance evaluation of a self-excited induction generator for stand-alone wind energy conversion system”, in 2015 IEEE Power, Communication and Information Technology Conference (PCITC).

• Panigrahi S., Gupta S., and Sahu P. K., “Phases Under Gaussian Additive Noise,” in IEEE Proc. Int. Conf. on Communication and Signal Processing (ICCSP), Chennai 2016.

• “Validation of Predictive Models to Estimate Annual PV Production: A case study of Odisha,” Tarai R.K. and Kale P., ICGET, 2016, KualalampurMalasya, 25th July to 27th July 2016.

• Signal Conditioning Circuit For Porous Silicon Biosensor To Detect Chromium In Potable Water, Swadin Kumar, Paresh Kale, P. Balasubramanian, Paper 13, 2nd International Conference on Advances in Steel, Power and Construction Technology (ICASPCT-2016) , 17-19 March, 2016, Raigarh, India.

• Embedded System for Mine Process Monitoring in a Network Constrained Environment Using Wireless Communication Bridge, ICMOCE 2015, IIT Bhubaneshwar.

• Gangavarapu Vaishnav and S. Gopalakrishna, “Design of non-solenoid magnet without the presence of magnetic materials”, 26th International Cryogenic Engineering Conference, March 7-11, Manekshaw Centre, New Delhi, India.

• Amit Kumar, Gopalakrishna Srungavarapu, “Power Quality Assessment of Table Based Direct Power Control for Active Front-end Rectifiers”, in Proc. IEEE First International Conference on Power Electronics, Intelligent control and Energy Sytems, Delhi Tehnological University, Delhi ,4th -6th july 2016.(Paper Id:1570270551). Kiran Kumar Gurrala, Susmita Das, “Maximized Secrecy Rate Based Power Allocation for Wireless Cooperative Network with Control Jamming”, in proceedings of IEEE Malaysia International Conference on Communications (IEEE MICC 2015), Kuching, Malasiya, 23-25 Nov 2015.


98

• D. Das and S. Das, “Cooperative Spectrum Sensing Using Hybrid IWOPSO Algorithm in Cognitive Radio Networks,”12th Malaysia International Conference on Communications (MICC 2015), Malaysia, 2015.

• Kumar, Bommena Pruthviraj, Deepa Das, and Susmita Das. “Cooperative spectrum sensing optimization through maximizing the network utility and minimizing the error probability.” Communication Technologies (GCCT), 2015 Global Conference on. IEEE, 2015.

• Sahoo, Bishnu Prasad, and Susmita Das. “Peer to peer topology based energy harvesting protocol for WBAN.” Communication Technologies (GCCT), 2015 Global Conference on. IEEE, 2015.

• Divya, Thatha, Kiran Kumar Gurrala, and Susmita Das. “Performance analysis of hybrid decode-amplify-forward (HDAF) relaying for improving security in cooperative wireless network.” Communication Technologies (GCCT), 2015 Global Conference on. IEEE, 2015.

• Jalan, Rati Dilipkumar, Deepak Kumar Rout, and Susmita Das. “Performance enhancement of MIMO/UWB based wireless Body area network.” Communication Technologies (GCCT), 2015 Global Conference on. IEEE, 2015.

• Das, Deepa, and Susmita Das. “A novel resource allocation for energy-efficient Cognitive Radio.” 2015 Annual IEEE India Conference (INDICON). IEEE, 2015.

• Rout, Deepak Kumar, and Susmita Das. “A novel orthogonal modulation format for Body Area Networks.” 2015 Annual IEEE India Conference (INDICON). IEEE, 2015.

Paper Accepted for Publication• Anup Kumar Panda and Nishant Patnaik, “Combined operation of PAC-UVT based UPQC with Fuel cell stack supply with

effective utilization of shunt and series inverter,” Electrical Power Components and Systems (Taylor and Francis).(Accepted).

• Pratap Mohanty and Anup Panda, “Fixed Frequency Sliding Mode (SM) Control Scheme Based on Current Control Manifold for Improved Dynamic Performance of Boost PFC Converter,” IEEE Journal of Emerging and Selected Topics in Power Electronics, vol. PP, no. 99, June 2016. (Accepted).

• A. Chatterjee, K. B. mohanty, V. S. Kommukuri, K. Thakre, “Model predictive current controller for performance enhancement of grid integrated single phase photovoltaic distributed generation plants,” Transactions of the Institute of Measurement and Control. (Accepted).

• S. D. Swain, P.K. Ray, K. B. Mohanty, “Improvement of power quality using a robust hybrid series active power filter,” IEEE Transactions on Power Electronics. (Accepted).

• Subrata Karmakar, ‘Virtual Instrument Based On-Line Monitoring System for Hands-On Laboratory Experiment of Partial Discharges’, IEEE Transaction on Education, in Press, June 2016, (DOI:10.1109/TE.2016.2586754). (Accepted).

• A. K. Naskar, S. Patra, S. Sen, “New control allocation algorithms in fixed point framework for over actuated systems with actuator saturation,” International Journal of Control. In press (2016), doi:10.1080/00207179.2016.1181785. (Accepted).

• N. Venkataramana Naik and S. P. Singh, “A Two-Level Fuzzy Based DTC Using PLLC to Improve the Induction Motor Performance,” International IEEE Conf. Proc, PEDES-16, Trivandrum Dec. 2016. (Accepted).

• N. Venkataramana Naik and S. P. Singh, “An Improved Fuzzy-2 DTC of Induction Motor Performance Using Five-Level SVPWM,” International IEEE Conf. Proc, PEDES-16, Trivandrum, Dec. 2016. (Accepted).

• Deepa Das, D.Matolak, Susmita Das, “Spectrum Occupancy Prediction Based on Functional Link Artificial Neural Network (FLANN) in ISM Band”Neural Computing and Applications,springer (Accepted).

• Kiran Kumar Gurrala, Susmita Das, “Maximized Channel Capacity Based Power Allocation Technique for Multi Relay Hybrid Decode-Amplify-Forward Cooperative Network” Wireless Personal Communication (Spinger) (manuscript id WIRE-D-14-0137).


Patent• Composition for Generation of Hydrogen by Thermal Decomposition of Ammonia Borane (AB) using Silicon Nanoparticles as

Catalyst. Granted: Patent No. 268706 on 14 Sept 2015.

• A patent titled “A Robust and Non-invasive Core Less Current Transducer” was filed on 30th March, 2016. A non-invasive method of current measurement was invented, where current in a partially accessible conductor (e.g. one side of the conductor is accessible) can be sensed.


99


By Faculty:• Prof. K. B. Mohanty presented two research papers and chaired two sessions at 10th Annual IEEE Int. Systems Conference

(SYSCON), Orlando, USA in April 2016.

• Best paper award for “Validation of Predictive Models to Estimate Annual PV Production: A case study of Odisha,” Tarai R.K. and Kale P., presented at ICGET, 2016, Kualalampur Malasya, 25th July to 27th July 2016,

By Students:• Gold Medal: Best Postgraduate Project (M.Tech) at National Institute of Technology, Rourkela, 2016.

• Shanta Jain Best Product Oriented Project at National Institute of Technology, Award Rourkela, 2016.

Technical Association / SocietiesSl. No. Name of Faculty Technical Association / Societies1. Prof. J. K. Satapathy2. Prof. Anup Kumar Panda FIET (UK), FIE, FIETE, Senior Member IEEE (USA)3. Prof. K B Mohanty IEEE, USA as a senior member, and with IE (India) and IETE as Fellow.4. Dr. Somnath Maity IEEE TCAS-I, IEEE TPE, IEEE TIAS. IEEE TIE, and European Transactions on

Electrical Power5. Dr. Susovon Samanta Member IEEE, USA6. Dr. Subrata Karmakar • Member of IEEE,USA

• Member of IEEE Dielectrics and Electrical Insulation Society • Member of IEEE Power & Energy Society• Member of CIGRE, an International Council of Large Electrical System. • Associate member of IE (India)• Life Member of Indian Laser Association (ILA)

7. Dr. Monalisa Pattnaik • Member of Institute of Electrical and Electronics Engineers, USA with membership number 92125882.

• Member of Institute of Electrical and Electronics Engineers Industrial Electronics Society, USA.

• Member of Institute of Electrical and Electronics Engineers Power Electronics Society, USA

8. Dr. Supratim Gupta Member IEEE, USA9. Dr. Paresh Govind Kale Member IEEE, USA10. Dr. Venkata Ramana Naik N Member IEEE, USA & IES

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Prof. K. B. Mohanty participated in INDICON 2015 at New Delhi during Dec. 2015, and 10th IEEE SYSCON at Orlando,

Florida, USA during April 18-21, 2016.

• Prof. S. Karmakar participated in The 19th International Symposium on High Voltage Engineering, Pilsen, Czech Republic, August, 23 – 28, 2015.

• Prof. S. Karmakar participated in International Conference on Condition Assessment Techniques in Electrical Systems (CATCON), CPRI Bangalore, December 10th-12th, 2015.

• Prof. PareshGovind Kale deliver a talk on “Solar Cell Physics and its Manufacturing” on 1st Dec 2015, at O P Jindal University, a 6 day (30th November 2015 to 5th December 2015) Training Programme on “Recent Development in Renewable Energy Systems” sponsored by CGCOST, Raipur and ISTE, New Delhi.


100




Shunt Active Power filter based On Cascaded Multilevel Inverter with Single DC Source

CSIR Prof. Anup Kumar Panda

20.92 Oct 2014 Nov 2017Augmentation of Power Electronics and Drives Lab

FIST DST Prof. Anup Kumar Panda

67.00 Oct 2015 Nov 2020

On-line diagnostic monitoring of high voltage power system

equipmentSERB, DST,

GOIDr. Subrata Karmakar

22.70 14-01-2013

13-01-2016

Design and Development of a Bidirectional DC-DC Converter with Power & Energy Management of Battery and Ultracapacitor for an Electric Bike with Regenerative Braking

SERB, DST Dr. Susovon Samanta

17.028 Mar 2015 Mar 2018

Modeling and Controller Design for Active Clamp Forward Converter with Multiple Outputs used as Electronic Power Conditioner (EPC)

ISRO Dr. Susovon Samanta

15.48 May 2015 May 2017

Hybrid Optimization Based Fractional Order Fuel Cell Modeling and

Online Parameter Estimation with Design of Adaptive Controller for

Integrated Power Converters

NRB, DRDO Dr. Susovon Samanta

12.98 Oct 2015 Oct 2018

Design and Development of a Standalone PV system using Three Port DC/DC Converter and H-Bridge Inverter for Home Application

DST Dr. Susovon Samanta

48.58

Not yet started, received

the approval

letterReconfigurable Hardware to Detect Drowsy Operator from Eye Image under Spectacles

BRNS Supratim Gupta 18.27 Apr 2016 Continuing

Design and development of porous Silicon based biosensor for Chromium detection in and around of Sukinda Mines Valley, Odisha

DST Prof. Paresh Kale and Prof. P.

Balasubramaniam

29.09 01-04-2016

31-03-2019

On-chip efficient power delivery systems for portable mobile appliances

DST & and National

Science Council (NSC), Taiwan

Dr. Somnath Maity 19.71 01-4-14 31-3-17



101


Name of the Project





1. 1 kW Shunt Active Power filter based On Cascaded Multilevel Inverter with Single DC Source 9.96

2. Diode Rectifier + 4 Leg Inverter stack 0.47

3. PMSG Machine coupled to Dc Machine 0.6

4. Absolute Encoder 0.32

LIST OF LABORATORIESSl. No. Name of the Laboratories


Jyotirmayee Dalei Development of voltage controller and fault analysis of self excited induction generator system

Prof. K. B. Mohanty

Deepak Kumar Rout Reliability Support and Performance Improvement in UWB-based Wireless Body Area Networks

Prof. S. Das



102


103

Department of FOOD PROCESS ENGINEERING


173 | P a g e





Food Process Technology

16

3

0

2

4

6

8

10

12

14

16

18

B.Tech. Ph.D.

79

0

20

40

60

80

100

B.Tech.


173 | P a g e






16

3

0

2

4

6

8

10

12

14

16

18

B.Tech. Ph.D.

79

0

20

40

60

80

100

B.Tech.



174 | P a g e

FACULTY

Sl. No. Name & Specialization1

Prof. Sabyasachi Mishra ([email protected])Head & Assistant Professor, PhD (Univ. of Saskatchewan, Canada)Specialization : Food and Bioprocess Engineering

2

Prof. Parag Prakash Sutar ([email protected])Assistant Professor, PhD (IIT, Kharagpur)Specialization : Drying and Dehydration, Microwave Processing of Food

3

Prof. Rama Chandra Pradhan ([email protected])Assistant Professor, PhD (IIT, Delhi)

1 1 1

2

3

2

0

0.5

1

1.5

2

2.5

3

3.5

Avanti Fellows EXL Service PCBL Pradan TCS Wipro


104

FACULTYSl. No. Name & Specialization

1

Prof. Sabyasachi Mishra ([email protected])Head & Assistant Professor, PhD (Univ. of Saskatchewan, Canada)Specialization : Food and Bioprocess Engineering

2

Prof. Parag Prakash Sutar ([email protected])Assistant Professor, PhD (IIT, Kharagpur)Specialization : Drying and Dehydration, Microwave Processing of Food

3

Prof. Rama Chandra Pradhan ([email protected])Assistant Professor, PhD (IIT, Delhi)Specialization : Post Harvest Engineering and Value Addition

4

Prof. Preetam Sarkar ([email protected])Assistant Professor, PhD (Purdue University, USA)Specialization : Food science and technology, Food Quality and Safety, Food nanotechnology

PUBLICATION

Publications in Journals• P. Sarkar, R. Choudhary, S. Panigrahi, I. Syed, S. Sivapratha, C.V. Dhumal. 2017. Nano-inspired systems in food technology

and packaging. Environmental Chemistry Letters (Article in press).

• S. Sivapratha, P. Sarkar. 2017. Multiple layers and conjugate materials for food emulsion stabilization. Critical reviews in food science and nutrition (Article in press).


105

• Y. Fu, P. Sarkar, A.K. Bhunia, Y. Yao. 2017. Delivery systems of antimicrobial compounds to food. Trends in Food Science & Technology, 57, 165-177.

• P. Sarkar, A.K. Bhunia, Y. Yao. 2017. Impact of starch-based emulsions on the antibacterial efficacies of nisin and thymol in cantaloupe juice. Food chemistry, 217, 155-162.

• B. Z. Hamar, S. Mishra, R. C. Pradhan. 2017. Physico-chemical and sensory analysis of Kendu (Diospyros melaxoxylon Roxb.) Jam using fuzzy logic, Journal of Food Measurement and Characterization, 2017 [On Line].

• A. Srimagal, S. Mishra, R. C. Pradhan. 2017. Effect of ethyl oleate and microwave blanching on drying kinetics of bitter gourd”, Journal of Food Science and Technology, vol. 54, no. 5, pp. 1192-1198, 2017.

• P. Ghosh, RC Pradhan, S Mishra. 2107. Low‐Temperature Extraction of Jamun Juice (Indian Black Berry) and Optimization of Enzymatic Clarification Using Box‐Behnken Design. Journal of Food Process Engineering, 40 (2), 1-11. doi: 10.1111/jfpe.12414.

• P. Ghosh, R. C. Pradhan, S. Mishra. 2017. Jamun Juice Extraction Using Commercial Enzymes and Optimization of the Treatment with the Help of Physicochemical, Nutritional and Sensory Properties, International Journal of Biological, Biomolecular, Agricultural, Food and Biotechnological Engineering, vol. 11, no. 1, pp. 25-28, 2017.

• P. Ghosh, R. C. Pradhan, S. Mishra, A. S. Patel, A. Kar. 2017. Physicochemical and nutritional characterization of Jamun (Syzygium cuminii), Current Research in Nutrition and Food Science, vol. 5, no. 1, pp. 25-35, 2017.

• Deepika S. and P.P. Sutar. 2017. Osmotic Dehydration of Lemon (Citrus limon L.) Slices: Modelling Mass Transfer Kinetics Correlated with Dry Matter Holding Capacity and Juice Sacs Losses, Drying Technology, vol. 35, no. 7, 877-892, 2017.

• P. Ghosh, R. C. Pradhan, S. Mishra. 2016. Optimization of process parameters for enhanced production of Jamun juice using Pectinase (Aspergillus aculeatus) enzyme and its characterization, 3 Biotech., vol. 6, 2016.

• S. C. Kumar, R. C. Pradhan, S. Mishra. 2016. Fabrication, performance evaluation and optimisation of sal (Shorea robusta) seed decorticator, Journal of Food Process Engineering, Vol. 43, no. 3.

• P. Ghosh, S. S. Rana, A. Nayak, R. C. Pradhan, 2016. Quality evaluation of food by thermal imaging”, International Journal of Processing and Post Harvest Technology, vol. 7, no. 1, pp. 126-133.

• P. Sarkar P, A. K. Bhunia, Y. Yao. 2016. Emulsion Stabilized with Starch Octenyl Succinate Prolongs Nisin Activity Against Listeria Monocytogenes in a Cantaloupe Juice Model. Journal of Food Science, 81, 2982–2987.

Paper Accepted for Publication• K. Vivek, S. Mishra, R. Sasikumar. 2017. Effect of ultra-sonication on postharvest quality parameters and microbial load on

Docynia indica. Scientia Horticulturae. Elsevier, USA.

• P. Ghosh, R.C. Pradhan, S. Mishra. 2017. Clarification of jamun juice by centrifugation and microfiltration: Analysis of quality parameters, operating conditions, and resistance. Journal of Food Process Engineering. Wiley, USA.

• S. Sivapratha, P. Sarkar. 2017. Oxidative stability and effect of stress factors on flaxseed oil-in-water emulsions stabilized by sodium caseinate–sodium alginate–chitosan interfacial membrane. Chemical Papers, Springer.

• S. S. Rana, R. C. Pradhan, S. Mishra. 2017. Optimization of chemical treatment on fresh cut tender jackfruit slices for prevention of browning by using response surface methodology. International Food Research Journal.

Books / Book Chapter• P. Sarkar, S.S. Panigrahi, E. Roy, P. Banerjee. 2017. Nanosensors in food safety, In: Portable Biosensors and Point-of-Care

Systems. Institute of Engineering and Technology (IET) Publishers.

• D.H. Lohith, P. Sarkar. 2017. Nanoemulsion as a nutrient delivery system in food In: Sustainable Agriculture Reviews vol 5. Springer.

• Lohith DH, Sarkar P. 2017. Potential of nanotechnology in dairy processing In: Sustainable Biological Systems for Agriculture: Emerging Issues in Nanotechnology, Biofertilizers, Wastewater, and Farm Machines. CRC Press (Taylor & Francis).

• S. S. Shirkole and P.P. Sutar. 2017. “Advances in Microwave Assisted Processing of Milk”, In Dairy Engineering: Technological Advances and Practices. Apple Academic Press, NY.

• C. Shashi Kumar, R. C. Pradhan, S. Mishra. 2016 “Machine performance on shelling of sal (Shorea robusta) seed’, Food Process Engineering and Technology, New Delhi, India, pp. 233-240.

• P. Ghosh, S. S. Rana, R. C. Pradhan, S. Mishra. 2016. Economical and Eco-friendly Drying Methods and Modelling for Retention of Quality Attributes of Amla”, Climate Change and its Implications on Crop Production and Food Safety, ISBN: 978-81-926935-4-5 Mahima Research Foundation and Social Welfare, Varanasi, Uttar Pradesh, India.

• N. R. Parikh, S. S.Shirkole, P.P. Sutar and N. Sutar, 2016. Eggplant Processing and Extraction of Bioactive Components”, In Vegetables Processing and Bioactive Compounds. Studium Press, New Delhi.


106

Publications in Conferences• P. Ghosh, R.C. Pradhan, S. Mishra. 2017. Jamun juice extraction using commercial enzymes and optimization of the treatment

with the help of physicochemical, nutritional and sensory properties. ICGFS 2017: 19th International Conference on Global Food Security, 8-9th January 2017, Singapore.

• R. C. Pradhan, S. S. Rana, S. Mishra. 2017. A Process for prevention of browning in fresh cut tender fackfruit’, ICGFS 2017: 19th International Conference on Global Food Security, 8-9th January 2017, Singapore.

• S. S. Shirkole and P.P. Sutar 2017. Shelf life Prediction of LDPE Packed Paprika (Capsicum annuum L.) Under Different Ambient Conditions. Red pepper: post-harvest sterilization and current issues, In National Conference on Spices: Challenges and Opportunities held at CFTRI Mysore during Feb 02-03, 2017.

• A Srimagal, S Mishra, R. C. Pradhan. 2016. Effect of Ethyl Oleate Treatment on Drying of Bitter Gourd. In 2016 ASABE Annual International Meeting. American Society of Agricultural and Biological Engineers. Florida, USA.

• Chanda Dhumal and Preetam Sarkar. 2016. Development and optimization of milk protein based edible film. International Conference on Emerging Technologies in Agricultural and Food Engineering (ETAE), IIT Kharagpur.

• C. Shashikumar, R. C. Pradhan, S. Mishra. 2016. “Machine performance on shelling of sal (Shorea robusta) seed”, International Conference on Emerging Technologies in Agricultural and Food Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India, 27-30 December, 2016.

• S. Irshaan and P. Sarkar. 2016. Influence of pH on Emulsification Behavior of Gum Arabic Oil-in-Water Emulsions. International Conference on Emerging Technologies in Agricultural and Food Engineering (ETAE), IIT Kharagpur.

• S. Irshaan and P. Sarkar. 2016. Effect of Ultrasonication Parameters on the Stability of Oil-in-Water Emulsions. Asian Food Safety and Security Association (AFSA) Conference on “Food Safety and Food Security”, KIIT University, Bhubaneswar, Odisha.

• S. Sivapratha and P. Sarkar. 2016. Comparison of Emulsions Stabilized by Anionic and Cationic Biopolymers. Asian Food Safety and Security Association (AFSA) Conference on “Food Safety and Food Security”, KIIT University, Bhubaneswar, Odisha.

• G. Behera and P.P. Sutar. 2016. Starch Gelatinization Using Electromagnetic Radiation”, In All India seminar on Post Harvest Management of Fruits and Vegetables, held at Institution of Engineers (India), Kolkata during June 01-02, 2016

Patent:


By Faculty: NIL

By Students:

Best Presentation award:• S. S. Rana, R. C. Pradhan, S. Mishra, “Innovative and economically innovative and economically effective methods for processing

of tender jackfruit to minimizing the wastage”, International conference on climate change and its implications on crop production and food security (ICCCICPFS), Institute of Agricultural Sciences, Banaras Hindu University, Varanasi, UP, India, 12-13 November, 2016.


Dr. S. Mishra• Member of American Society of Ag & Bio. Engineers (ASABE), USA.

• Member of Canadian Society of Bio Engineers (CSBE), Canada.

• Member of Indian Society of Agricultural Engineers (ISAE), India


Seminar Attended:• P. Ghosh, RC Pradhan, S Mishra. 2017. Jamun juice extraction using commercial enzymes and optimization of the treatment

with the help of physicochemical, nutritional and sensory properties. ICGFS 2017: 19th International Conference on Global Food Security, 8-9th January 2017, Singapore.


107

• R. C. Pradhan, S. S. Rana, S. Mishra. 2017. “A Process for prevention of browning in fresh cut tender fackfruit.”, 19th International Conference on Global Food Security, Singapore, 2016, 8-9th January 2017.

• C. Shashi Kumar, R. C. Pradhan, S. Mishra. 2016. Machine performance on shelling of sal (Shorea robusta) seed”, International Conference on Emerging Technologies in Agricultural and Food Engineering, Indian Institute of Technology, Kharagpur, West Bengal, India, 27-30 December, 2016.

• A Srimagal, S Mishra, R. C. Pradhan. 2016. Effect of Ethyl Oleate Treatment on Drying of Bitter Gourd. In 2016 ASABE Annual International Meeting (p. 1). American Society of Agricultural and Biological Engineers. Florida, USA.

• S. Irshaan and P. Sarkar. 2016. Influence of pH on Emulsification Behavior of Gum Arabic Oil-in-Water Emulsions. International Conference on Emerging Technologies in Agricultural and Food Engineering (ETAE), IIT Kharagpur.

• S. Irshaan and P. Sarkar. 2016. Effect of Ultrasonication Parameters on the Stability of Oil-in-Water Emulsions. Asian Food Safety and Security Association (AFSA) Conference on “Food Safety and Food Security”, KIIT University, Bhubaneswar, Odisha.

• S. Sivapratha and P. Sarkar. 2016. Comparison of Emulsions Stabilized by Anionic and Cationic Biopolymers. Asian Food Safety and Security Association (AFSA) Conference on “Food Safety and Food Security”, KIIT University, Bhubaneswar, Odisha.

• Chanda Dhumal and Preetam Sarkar. 2016. Development and optimization of milk protein based edible film. International Conference on Emerging Technologies in Agricultural and Food Engineering (ETAE), IIT Kharagpur

RESEARCH PROJECTSName of the Project Sponsoring Agency Name of the PI /

Co-PITotal Value


Design and Development of MW assisted UV Sterilization System for Liquid Food

ICAR,

New Delhi

Dr. S. Mishra

Dr. R. C. Pradhan

32.00 Feb 2016 Feb 2018

Design, development and testing of a continuous Aonla pricking machine

DST, New Delhi Dr. R. C. Pradhan

Dr. S. Mishra

10.92 July 2015 Jun 2017

Utilizations of Minor Millets for Ready-to-eat Nutritious Snacks Product by Wet Extrusion Technology

SERB, New Delhi Dr. R. C. Pradhan

Dr. S. Mishra

45.96 Mar 2017 Feb 2020

Designing Emulsion-based Antimicrobial Delivery Vehicles for Prolonged Protection of Fresh-cut Fruit Systems against Food-borne Pathogens using Papaya as Model

SERB, New Delhi Dr. P. Sarkar 18.05 Dec 2015 Dec 2018

Development of Cost Effective Microwave-Infrared-UV Assisted Continuous Sterilization Process for Spices

MoFPI, Govt of India

Dr. P. P. Sutar

Dr. P. Sarkar

53.63 Sep 2015 Sep 2018

Creation of Infrastructural Facilities For Food Process Engineering Program

NMFP, MoFPI, Govt of India

Dr. S. Mishra

Dr. R. C. Pradhan

100 Jan 2016 Jan 2018

CONSULTANCY SERVICES : Sponsors Address Title of the Project Faculty Name

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCEName of the Project Sponsoring Agency Name of the




108

LIST OF LABORATORIES DEVELOPED Sl. No. Name of the Laboratories1 Food Quality and Safety Lab

2 Food Process Design Lab

3 Horticultural Processing Lab

4 Food Grain Processing Lab

5 Dairy and Livestock Processing Lab

6 Food Packaging and Storage Lab

7 Food Product Development Lab

8 Food Refrigeration and Cold Chain Lab

PH.D. DEGREES AWARDED BY THE DEPARTMENT: Name of the Student Title of Thesis Supervisor

M.TECH. (RESEARCH) DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis Supervisor

A. Srimagal Effects of Pre-treatments on Drying Characteristics of Bitter gourd Dr. S. Mishra

S. Deepika Infrared and Microwave Assisted Hot Air Drying of Lemon (Citrus limon L.) Dr. P. P. Sutar

Shashi Kumar C. Design, development and testing of sal (Shorea robusta) seed decorticator Dr. R.C. Pradhan

Lohith Kumar DH Designing and characterization of emulsion-based matrices for the encapsulation of bioactive oils using polysaccharides

Dr. P. Sarkar

S. Sivapratha Development of a multilayer emulsion system for the protection of polyunsaturated fatty acids in flaxseed oil

Dr. P. Sarkar


109

Department of HUMANITIES & SOCIAL SCIENCES


182 | P a g e




Placement Stastistics

8

5

0

1

2

3

4

5

6

7

8

9

MA Ph.D.

18

0

2

4

6

8

10

12

14

16

18

20

MA


182 | P a g e





8

5

0

1

2

3

4

5

6

7

8

9

MA Ph.D.

18

0

2

4

6

8

10

12

14

16

18

20

MA


183 | P a g e

FACULTY


1Prof. Akshaya Kumar Rath ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)English Literature

2Prof. Apparao Thamminaina ([email protected])Assistant professor, Ph.D. (University of Hyderabad)Social Anthropology

3Prof. Bikash Ranjan Mishra ([email protected])Assistant Professor, Ph.D. (IIT Kanpur)International Economics and Industrial Economics

4Prof. Jalandhar Pradhan ([email protected])Assistant Professor, Ph.D. (IIPS.Mumbai)Health Economics

5Prof. Mantu Kumar Mahalik ([email protected])Assistant Professor, M.Phil. (JNU New Delhi), Ph.D. (IIT Madras)Macroeconomics, Housing & Energy Economics

6Prof. Narayan Sethi ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)Financial Economics

7Prof. Nihar Ranjan Mishra ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)Social Anthropology

8

Prof. Ramakrishna Biswal ([email protected])Assistant Professor, M.Phil. (Center of Advanced Study in Psycology, Utkal university, Bhubaneswar),Ph.D.(University of Delhi).Clinical and Counselling Psychology, Cognitive Psychology

1 1

0

0.2

0.4

0.6

0.8

1

1.2

iBooks TCS


110


1Prof. Akshaya Kumar Rath ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)English Literature

2Prof. Apparao Thamminaina ([email protected])Assistant professor, Ph.D. (University of Hyderabad)Social Anthropology

3Prof. Bikash Ranjan Mishra ([email protected])Assistant Professor, Ph.D. (IIT Kanpur)International Economics and Industrial Economics

4Prof. Jalandhar Pradhan ([email protected])Assistant Professor, Ph.D. (IIPS.Mumbai)Health Economics

5Prof. Mantu Kumar Mahalik ([email protected])Assistant Professor, M.Phil. (JNU New Delhi), Ph.D. (IIT Madras)Macroeconomics, Housing & Energy Economics

6Prof. Narayan Sethi ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)Financial Economics

7Prof. Nihar Ranjan Mishra ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)Social Anthropology

8

Prof. Ramakrishna Biswal ([email protected])Assistant Professor, M.Phil. (Center of Advanced Study in Psycology, Utkal university, Bhubaneswar),Ph.D.(University of Delhi).Clinical and Counselling Psychology, Cognitive Psychology

9Prof.(Ms.) Seemita Mohanty ([email protected])Associate Professor, M.Phil, Ph.D. (Utkal University)English Language Teaching, Sociolinguistics, Cultural Studies

10Prof. Sthitapragyan Ray ([email protected])Assistant Professor, Ph.D. (Utkal University)Sociology of Development

11Prof. Surabhi Verma ([email protected])Assistant Professor, Ph.D. (Punjab University,Chandigarh)Sanskrit

12Prof. V. Vamshi Krishna Reddy ([email protected])Assistant Professor, Ph.D. (University of Hyderabad)English Literature

PUBLICATION

Publications in Journals• Rath, Akshaya K. “Allen Ginsberg in India: Life and Narrative.” Scripta Humana. Tom 7. 2016. 137- 150.

• Parveen, Rasheda and Akshaya K. Rath. “The Rise of Matriarchy: Kamala Das and Suniti Namjoshi.” Research and Criticism. Vol 7: 2016.

• Rath, Akshaya K. “Towards an Alternative Literary Canon in India.” The Dhauli Review. Issue 9: 2016.

• Pradhan, J., Dwivedi, R. & Banjare, P. 2017. Relying on Whom? Correlates of Out of Pocket Health Expenditure among the Rural Elderly in Odisha, India, Ageing International. doi:10.1007/s12126-017-9293-7.

• Dwivedi, R., Pradhan J. 2017. Publically Financed Health Insurance for Poor: Understanding Rashtriya Swasthya Bima Yojna (RSBY) in Odisha, Indian Journal of Economics and Development 13 (2), 281-294.


111

• Singh, Abhishek., P. Arokiasamy., J. Pradhan, K. Jain, S K Patel. 2016. Sibling and family level clustering of underweight children in northern India, Journal of Biosocial Science, pp. 1–16. doi: 10.1017/S0021932016000390.

• Banjare, P., J. Pradhan, R. Dwivedi , S.S. Mahapatra , and B R Debata. 2017. Concern and Maintenance during Twilight Years: Perception and Observation of Elderly Towards the Younger Generation in Rural Odisha, Journal of Health Management, doi: 10.1177/0972063417699667.

• Pradhan, J., R. Dwivedi. 2016. Do we provide affordable, accessible and administrable health care? An assessment of SES differential in Out of Pocket Expenditure on delivery care in India, Sexual & Reproductive Healthcare. doi: 10.1016/j.srhc.2016.10.006.

• Dwivedi, R., J. Pradhan. 2016. Does equity in healthcare spending exist among Indian states? Explaining regional variations from national sample survey data, International Journal for Equity in Health, 16(1), 15.

• Sethi, Narayan, Sucharita, Sanhita and Pradhan, H.K., “Environmental Implications of Contract Farming: The Case of Cotton Cultivation in Odisha” Journal of Economic Policy and Research, 11(2), April-Sept, 2016.

• Sethi, Narayan and Sahoo, Kalpana, “Foreign Aid vs. Economic Development: Exploring the Empirical Linkage for India, Sri Lanka and Maldives” South Asia Journal of Management, 23(4), pp.96-123, Dec. 2016.

• Sahoo, Kalpana and Sethi, Narayan, “Impact of Foreign Capital on Economic Development in India: An Econometric Investigation” Global Business Review (Sage), 18(3), pp.1-15. April, 2017.

• Mallick, Arundhati and Sethi, Narayan, “Interaction between Monetary and Fiscal Policy: An Empirical Evidence from India” PRAGATI: Journal of Indian Economy (Journal Press India), 3(2), pp.17-25, Jan, 2017.

• Seemita Mohanty, “Education in Mother Tongue: Impact of Multilingual Education in Odisha.” Economic and Political Weekly (EPW). Vol LII, No. 7, pp. 31-38, 2017

• Seemita Mohanty, “An Assessment of the English Language Needs of Tribal Youth in Urban Odisha and Identifying the Barriers Experienced in Their Language Learning.” Tomlinson, B and Keedwell, A (eds). Explorations: Teaching and Learning English in India. British Council, Kolkata.

• S. Verma, Philosophical physiology of dreams and their precognitive capability, page no. 66-70, International Journal of Sanskrit Research, Volume 3, Issue 2, 2017, ISSN: 2394-7519. Indexed, Internationally Referred & Peer Reviewed, Impact Factor (RJIF): 5.12.

• S. Verma, The Transition Phases in the Gross Manifestation of Limited Consciousness (Nidrā, Svapna & Samādhi), Page no. 75-89. Journal- International Journal Of Multidisciplinary Educational Research. Volume 5, Issue 8(4), August 2016. ISSN: 2277-7881. Indexed & Internationally Referred. Impact Factor: 3.318.

• Shahbaz, M., Mallick, H., Mahalik, M.K., and Hammoudeh, S. ‘‘Is Globalization Detrimental to Financial Development? Further Evidence from a Very Large Emerging Economy with Significant Orientation towards Policies’’, Applied Economics, pp: 1-22, 2017.

• Shahbaz, M., Bhattacharya, M., and Mahalik, M.K. ‘‘Finance and Income Inequality in Kazakhstan: Evidence since Transition with Policy Suggestions’’, Applied Economics, pp: 1-15, 2017.

• Kandil, M., Shahbaz, M., Mahalik, M.K., and Nguyen, D.K. The Drivers of Economic Growth in China and India: Globalization or Financial Development? International Journal of Development Issues, vol.16, issue.1, pp: 54-84, 2017.

• Shahbaz, M., Huang, THV. Mahalik, M.K., and Roubaud, D. ‘‘Energy Consumption, Financial Development and Economic Growth in India: New Evidence from a Nonlinear and Asymmetric Analysis’’, Energy Economics, vol.63, pp: 199-212, 2017, Cited By 2.

• Mahalik, M.K., Babu, S.M., Nanthakumar, L., and Shahbaz, M. ‘‘Does Financial Development Intensify Energy Consumption in Saudi Arabia?’’, Renewable & Sustainable Energy Reviews, vol.75, pp: 1022-1034, 2017.

• Shahbaz, M., Mahalik, M.K., Shah, S.H., and Sato, J.R. ‘‘Time varying analysis of CO2 emissions, energy consumption, and economic growth nexus: Statistical experience in next-11 countries’’, Energy Policy, vol.98, pp: 33-48, 2016, Cited By 3 [On Line].

• D.Kumar & Nihar Ranjan Mishra ,Traditional Technology and Cultural Adaptation to mountain Ecosystem: A Case Study of an Himalayan Village, Journal of Oriental Anthropologist, Vol 16 (1).

• Suman Devi & Nihar Ranjan Mishra ,Conflict over Natural resources: A Study A Study on Jharbadhali Micro Watershed in Odisha, Conflict Study Quarterly, Vol. 14.

• Sahoo, D & Mishra, N ,Development-Induced Displacement and Gender Injustice: Some Critical Reflections, Journal of Politics & Governance, Vol. 5 No. 4, Pp. 19-29, 2017.

• Kumar, D & Mishra, N, Observing Developmental Intervention in Mineral-rich Adivasi Subsistence Economy: An Ethnographic Account from West Singhbhum (Jharkhand), Contemporary Voice of Dalit, 9(1) 73–86. 2017.

• Kumar, D., & Sahoo. Dinabandhu. (2017) Neoliberal Development, Sustainability and the Production of Fictitious Commodity: Some Cases from the Adivasis Region in India. The Oriental Anthropologist. Forthcoming 17 (!) , NA.


112

• Subudhi,C.& Biswal,R.(2016). Mental Health Scenario in India after Erwadi Tragedy. De Paul Journal of Sceintific Research. DeNovo 16 Special Edition.

• Dr. P. K. Jena and Dr. B. R. Mishra (2016). Determinants of Foreign Direct Investment inflows into India: An Econometric Investigation The Indian Economic Journal, Special Issue, December, 2016. [ISSN: 0019-4662].

Publications in Conferences• Meenakshi Sankaran and Seemita Mohanty. “Importance versus Achieved: A Cross-Sectional Study on Engineering Students’

Perception on Generic Attributes”, The Fourth International Conference on Transformations in Engineering Education (ICTIEE, 2017).

• S. Verma, Universal Consciousness and Spiritual Intelligence (With special reference to Kāāmāra āaivism), Page no. 7-16. Pub: Krishi Sanskriti Publications. Sept. 2016. ISBN: 978-93-85822-32-2.

• Mishra, N & Mohanty, S, Development Programmes and Tribal Livelihoods: A Case of MGNREGA in Western Odisha, Flagship Programmes: Impact, Problems & Challenges Ahead, edited by Kumaran, K.P, NIRD, Hyderabad, Academic Foundation, New Delhi 2017.

• Mishra Bikash Ranjan Role of Institutional Quality as a Key Determinant of FDI Flows in Developing Asian Economies” published in the International Journal of Economics and Management Engineering Vol: 3, No: 10, 2016 of 18th International Conference on Economics and Finance research, Paris, France.

• Mishra Bikash Ranjan Role of institutional quality in the promotion of FDI Inflows: Evidences from Asian Economies” and “Factors behind the bilateral flows of International Trade and Investment – Experiences from the BRICS countries” published in the conference proceedings of 5th Bi-annual Conference on Empirical Issues in International Finance and Trade during 16-17 December 2016 organized by Indian Institute of Foreign Trade (IIFT), Kolkata.

Paper Accepted for Publication• Rath, Akshaya K. “Bhakti.” Encyclopedia of Women in World Religions: Faith & Culture Across History. Gen Ed. Susan de Gaia.

ABC CLIO: USA. 2017 (in press).

• Pradhan, J., Dwivedi, R., Rout, S, Pati, S. 2017. Socio-economic differentials in Out of Pocket Expenditure (OOPE) and Catastrophic Spending on Accidental Injury in India: Evidences from NSSO 71st round data, Health Economics Review (forthcoming).

• Sethi, N, Subhashree Nayak, Padmaja Bhujabal and Arundhati Mallick, Determinants and Pattern of Saving Behavior in Rural Households of Western Odisha: A Micro Level Analysis” , Journal of Economic Policy and Research (Oct, 2016-March, 2017 issue).

• Mohanty , Seemita. “An Assessment of the English Language Needs of Tribal Youths in Urban Odisha and Identifying the Barriers Experienced By Them in Their Language Learning.” British Council Publications, 2016.

Books / Book Chapter• Rath, Akshaya K. Ed. Secret Writings of Hoshang Merchant. Oxford University Press: New Delhi. 2016.

• Mishra Bikash Ranjan Institutional Quality of Developing Asian Economies: A key factor for leading FDI destinations? in Somesh K. Mathur, et.al. (Edited), Theorizing International Trade: An Indian Perspective, Palgrave Macmillan, U.K. (Forthcoming) 2017. [ISBN: 978-981-10-1758-2].

• Mishra Bikash Ranjan Spill-over Effects of FDI on Productivity of Indian Manufacturing Firms in Somesh K. Mathur, et.al. (Edited), Methods and Applications in Trade Policy Research, Chapter 7, Athena Academic, 2016. [ISBN: 978-19-1039-005-4]

Patent


By Faculty:• Prof. S. Verma, Certificate of Appreciation from ICTIEE 2017, for the valuable contribution in reviewing the Research Papers

in 4th International Conference on Transformations in Engineering Education, 2017.

• Prof. Bikash Ranjan Mishra awarded RBI Scholarship for faculty members on the topic of “The mediating factors and FDI spillover Effects: Evidences from Indian manufacturing Firms” [01st September 2016 to 31st November 2016.]


113

By Students:• Padmaja Bhujabal was awarded the ICSSR Doctoral Fellowship by Indian Council of Social Science Research (ICSSR), Ministry

of Human Resource Development in January 2017.

• Poojashree Mishra was awarded the ICSSR Doctoral Fellowship by Indian Council of Social Science Research (ICSSR), Ministry of Human Resource Development in January 2017.


Prof. J. Pradhani. Member in the association of Human Development and Capability Approach (HDCA)

ii. Member of International Union for the Scientific Study of Population (IUSSP)

iii. Member of International Development Evaluation Association (IDEAS)

iv. Member of European Association for Population Studies (EAPS)

v. Member of International Health Economics Association (iHEA)

Prof. S. Mohantyvi. Donor Member, English Language Teachers Association of India (ELT@I).

vii. Member, International Association of Teachers of English as a Foreign Language (IATEFL), UK.

viii. Life Member, Linguistic Society of India (LSI).

ix. Life Member, Indian Association of Commonwealth Literature & Language Studies (IACLALS).

x. Member, Indian Society for Technical Education (ISTE).

Prof. R.K. Biswalxi. Psychologist, District Child Protection Unit, Sundargarh by a notification no. 2063, Dtd.16.06.2017

xii. Psychologist, High Risk Baby Clinic, Ispat General Hospital, Rourkela

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• National Conference on Development, Dispossession and Resistance, Organized from 14 to 15th November, 2016.

• National Conference on “Health, Public Policy and Human Development: A way forward to address SDGs (HPPHD-2017)” during 30th March- 31st March, 2017.

• Tribal Conclave. Organized from 22-23rd April, 2017.

• A short-term training programme on “Application of SPSS in Demographic and Health Care Research” 16th – 18th August 2016 .

• Conducted a Three Day Short Term Course on ‘‘Panel Data analysis Using STATA’’ during 23-25 November, 2016.

• Conducted a Three Day Short Term Course on ‘‘Qualitative Research Methodology for Social Sciences, Management and NGO Professionals’’ during October 7-9, 2016.

• Short Term Course on Project Management for Development Professionals and Researchers, organized from 27-29th January, 2017.

• TEQIP Sponsored Workshop on Thesis and Scientific Writing. 18-19 October 2016.

• TEQIP Sponsored Workshop on Communication and Work Culture in Academic Campus. 19-20 October 2016.

• Local Seminar on “Demonetisation: Personal Narratives and Political Motifs.” 10 February 2017.

• Orientation Workshop-cum-Felicitation Function (sponsored by Ministry of Tribal Affairs, Govt. of India), 14th June 2017 (NIT, Rourkela).


114

SEMINAR, SYMPOSIA, WINTERSCHOOL PARTICIPATION BY FACULTY MEMBERS• International Conference on Transforming India 2030: Strategies for Sustainable Development Goals on the topic of “Impact

of Economic Growth and Government Expenditure on Income Inequality in India: An Empirical Investigation” during 15-17 February, 2017, organized by Symbiosis School of Economics, Symbiosis International University, Pune, India (N. Sethi & Padmaja Bhujabal).

• Institute-sponsored seminar on “Demonetization: Personal Narratives and Political Motifs” on the topic of ‘Demonetization and Its Impact on the Indian Economy” held on 10 February 2017 by Dept. of Humanities and Social Sciences and Dept. of Ceramic Engineering, NIT Rourkela, Odisha (N. Sethi & Padmaja Bhujabal).

• “53rd The Indian Econometric Society (TIES) Annual Conference” on the topic of “Interaction between Monetary and Fiscal Policy: Evidence from India” during 22-24 December, 2016 at NISER, Bhubaneswar, Odisha (N. Sethi & A. Mallick).

• “Second International Conference on Applied Economics and Business” on the topic of Spillover Effect of Fed Policy on Indian Financial Market Efficiency and International Capital Flows during 28th – 29th July, 2016 at Department of Economics, Shri Mata Vaishno Devi University, Katra, Jammu and Kashmir (N. Sethi & Madhusmita Mohanty).

• International Conference: World Congress on Interrelationship among Arts, Culture, Humanities, religion, Education, Ethics, Philosophy, Spirituality, Science and Society for Holistic Humane development, organised by Krishi Sanskriti Publications, JNU, New Delhi, on 25th September 2016. Research Paper title: Universal Consciousness and Spiritual Intelligence (With special reference to Kāāmāra āaivism) (S. Verma).

• International Conference: International Conference on Transformations in Engineering Education (ICTIEE 2017), organised by Manipal University, Jaipur in collaboration with IUCEE, 11-12th Jan 2017. Research Paper title: Spirituality- The Science of Self Realization, its application to transform present Engineering & Technical Education in India (In the light of Indian Philosophy ‘Kāāmāra āaivism’) (S. Verma).

• International Conference: International Conference on Idea of Bharat organised y Bhartiya Sikshan Mandal, New Delhi at IGNOU, New Delhi, 23-25th Feb 2017. Research Paper title: Idea of Bharat: The Amalgamation of Science and Spirituality (S. Verma).

• Self-Governance and Watershed Development Programme: A Case from Eastern India, Third International Sociological Association Forum, Vienna, during 10-14 July 2016 (N.R.Mishra).

• The Gendered Nature of Vulnerability: Evidence from Natural Disasters in India. ISA 3rd Forum of Sociology organized by International Sociology Congress, Vienna, during 10-14 July 2016 (J.Parida & N.R. Mishra).

• Presented a paper entitled ‘From Peasants to Migrants: A Neo-Marxist Perspective on Indentured Labour System’ in the 37th Annual Conference organised by Indian Association for the Study of Population held on December 7-9, 2016 at IEG, Delhi University, Delhi, (S.Panda & N.R. Mishra).

• State, Adivasi and Double Contradiction of Development: A Case of Kolhan In Jharkhand in national conference titled Development, Dispossession and Resistance organised by Department of Humanities and Social Sciences, NIT Rourkela on 14 to 15 November 2016(D.Kumar & N.Mishra).

• From Polanyi to Gramsci and Foucault: Looking at Polanyian Concepts through the Lenses of Neoliberal Cultural Politics of Development in India in International conference titled A Great Transformation? Global Perspectives on Contemporary Capitalism organised by Johannes Kepler University, Linz, Austria on January 10-13, 2017 (D. Kumar & D. Sahoo).

• Seeing the State through Governmentality and the Politics of Development: A Case of Kolhan (Jharkhand) in national conference titled conference titled Rethinking Development: Social development Today, State, Industry and Civil Society in India organised jointly by AISSA and Department of Sociology BHU, Varanasi on 10 and 11 February 2017 (D. Kumar & N. Mishra).

• Emotion as a Tool in the Classroom” under the Theme: School Safety and School Climate ISSBD Workshop 2017, Thailand (R.K. Biswal).

• “Life Style Disease among City Dwellers: A Study of Rourkela City” during National Conference on Health, Public Policy and Human Development: A Way Forward to Address SDGs (HPPHD-2017) (R.K. Biswal).


115

RESEARCH PROJECTSName of the Project Sponsoring Agency Name of the PI Total Value (Rs.

in Lakhs)Start Date Close Date

Dynamics of Development of the Kondhs (PVTG) of Odisha

Ministry of Tribal Affairs, Government of India

Dr. Apparao Thamminaina

5,07,150 1-04-2017 31-03-2018

NTFP Management and Women Empowerment: A study on PVTG of Odisha

Ministry of Tribal Affairs, Government of India

Dr. Niharranjan Mishra

9,73,600 1-04-2017 31-03-2018

Clustering of Infant and Child Mortality among Primitive Tribes in Odisha

ICMR Dr.Jalandhar Pradhan

10.14 1-01-2016 31-12-2016

Preparation of State Human Development Report, Odisha

PHDMA, P & C Dept, Govt. of Odisha

Dr. Jalandhar Pradhan

29.6 2017

“Health of Tribal Elderly in Odisha: Challenges of Access and Affordability”

Ministry of Tribal Affairs (MoTA), GoI.

Dr. Jalandhar Pradhan

4.9 1-04-2017 31-03-2018

An Assessment of Impact of Tribal Sub Plan Schemes on Tribal Communities of Odisha

Ministry of Tribal Affairs (MoTA), GoI

Dr. Narayan Sethi 4,91 1-04-2017 31-03-2018

Youth & Post-conflict Reconstruction ICSSR, New Delhi S.P. Ray 100,000 17-4-17 16-4-18Mother-tongue based Multilingual Education in Odisha: Issues, Challenges and Impact

Ministry of Tribal Affairs (MoTA), Govt. of India

Prof. Seemita Mohanty

9, 09, 300/- 1-04-2017 31-03-2018

Code-switching and Language Questions among PVTGs of Odisha



4, 80, 900/- 1-04-2017 31-03-2017

A Study relating Consciousness and Spiritual Intelligence with reference to Kāśmīra Śaivism

Indian Council of Philosophical Research (ICPR), New Delhi

Prof. Surabhi Verma

3.00 31-04-2017

31-03-2019

Causes and Consequences of Dropouts in Primary and Secondary Education: A Study of Tribal Children in Sundargarh District of Odisha

Ministry of Tribal Affairs (MoTA), GoI, New Delhi

Dr. Mantu Kumar Mahalik

Rs. 4,95,002/- Apr 2017 Mar 2018

Mapping and Identifying the Barriers to Inclusive Education among Tribal Children with Developmental Disability in Sundargarh District of Odisha

Ministry of Tribal Affairs,

Dr. Ramakrishna Biswal

4,98,750 Apr 2017 Mar 2018

Empowerment of tribal women through handicrafts: a study on sundaragarh district of odihsa

Ministry of Tribal Affairs,

Dr. Bikash Ranjan Mishra

4,98,750 Apr 2017 Mar 2018



116


Name of the Project Sponsoring Agency Name of the Coordinator



Centre of Excellence for Tribal Studies



1, 31, 66000/- 28-2-2017 31-3-2018



Antarjeeta Nayak Understanding The Perception of The Causes of Poverty and Its Linkage With Quality of Life: A Study of Rourkela City

Dr.Jalandhar Pradhan

Madhusmita Mohanty International Capital Flows and Financial Market Dynamics: Empirical Evidence from the Indian Stock Market

Dr. Narayan Sethi

Arundhati Mallick An Evaluation of Core Inflation Dynamics and Its Impact on Macroeconomic Performance in India

Dr. Narayan Sethi



117

Department of INDUSTRIAL DESIGN


194 | P a g e





22

18

4

0

5

10

15

20

25

B.Tech M.Tech. (2 Years) Ph.D.

105

35

0

20

40

60

80

100

120

B.Tech. M.Tech ( 2 Years)


194 | P a g e





22

18

4

0

5

10

15

20

25

B.Tech M.Tech. (2 Years) Ph.D.

105

35

0

20

40

60

80

100

120

B.Tech. M.Tech ( 2 Years)


195 | P a g e

Faculty

SL Name & specialization

1Prof. Bibhuti Bhusan Biswal ([email protected])(on Deputation 05/2017-05/2022)Robotics, FMS, CNC, Computer integrated manufacturing and Rapid product manufacturing

2

Prof. Mohammed Rajik Khan ([email protected])Geometric modeling, CAD, CAE, Innovative product design, Human factors in product design, CAD based industrial ergonomics, Rapid prototyping and tooling, Electromagnetic welding, Bio-mechanical, etc.

3Dr. Dibya Prakash Jena ([email protected])Product Design and Development, Condition Monitoring, Industrial Instrumentation, Mechatronics, Automotive noise control, Vibration, Industrial Noise Control, FEM Analysis, Dynamics and Control,

4

Dr. B.B.V.L. Deepak ([email protected])Machines & mechanisms, mechatronics, industrial robots, autonomous guided vehicles, algorithm development for trajectory planning of robotic arms and mobile robots.

5Dr. Mohit Lal ([email protected])Product design and development, condition monitoring of rotating machineriesactive magnetic bearings

6Prof. Dhananjay Singh Bisht ([email protected])Product conceptualization, product semantics, product styling, product ergonomics, user interface design, usability engineering

PUBLICATION


5

1

6

1 1

6

1

3

0

1

2

3

4

5

6

7

3SCSolutions

Arrelic BhushanPower &

SteelLimited(BPSL)

Halftick Infosys(Core

Division)

TCS TegaIndustries

Wipro


118

FacultySL Name & specialization

1 Prof. Bibhuti Bhusan Biswal ([email protected])(on Deputation 05/2017-05/2022)Robotics, FMS, CNC, Computer integrated manufacturing and Rapid product manufacturing

2 Prof. Mohammed Rajik Khan ([email protected])Geometric modeling, CAD, CAE, Innovative product design, Human factors in product design, CAD based industrial ergonomics, Rapid prototyping and tooling, Electromagnetic welding, Bio-mechanical, etc.

3 Dr. Dibya Prakash Jena ([email protected])Product Design and Development, Condition Monitoring, Industrial Instrumentation, Mechatronics, Automotive noise control, Vibration, Industrial Noise Control, FEM Analysis, Dynamics and Control,

4 Dr. B.B.V.L. Deepak ([email protected])Machines & mechanisms, mechatronics, industrial robots, autonomous guided vehicles, algorithm development for trajectory planning of robotic arms and mobile robots.

5 Dr. Mohit Lal ([email protected])Product design and development, condition monitoring of rotating machineries active magnetic bearings

6 Prof. Dhananjay Singh Bisht ([email protected])Product conceptualization, product semantics, product styling, product ergonomics, user interface design, usability engineering

PUBLICATION

Publications in Journals• S. Sahu, B. B. Choudhury, and B. B. Biswal, “A Vibration Analysis of a 6 Axis Industrial Robot Using FEA”, Materials Today:

Proceedings vol. 4. (2), pp.2403-2410, 2017.

• S. Datta, B. B. Biswal, and S. S. Mahapatra, “A Novel Satisfaction Function and Distance-Based Approach for Machining Performance Optimization during Electro-Discharge Machining on Super Alloy Inconel 718”, Arabian Journal for Science and Engineering vol. 42.(5), pp.1999-2020, 2017.

• M V A Raju Bahubalendruni, and B B Biswal. “A novel concatenation method for generating optimal robotic assembly sequences”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231.(10) pp. 1966-1977, 2017.

• S. Datta, B. B .Biswal, and S S Mahapatra, “Electrical discharge machining of Inconel 825 using cryogenically treated copper electrode: Emphasis on surface integrity and metallurgical characteristics”, Journal of Manufacturing Processes, vol. 26, pp.188-202, 2017.

• M V A Raju Bahubalendruni, B B Biswal, and B B V L Deepak, “Computer Aided Assembly Attributes Retrieval Methods for Automated Assembly Sequence Generation”, World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol.11.(4), pp. 748-756, 2017.

• Balabantaray, Bunil Kumar, et al. “A Quantitative Performance Analysis of Edge Detectors with Hybrid Edge Detector”, JCP, vol. 12. (2), pp. 165-173, 2017.

• A. P. Chakraverty et al. “Effect of Hydrothermal immersion and Hygrothermal Conditioning on Mechanical Properties of GRE Composite”, IOP Conference Series: Materials Science and Engineering, vol. 178. (1) IOP Publishing, 2017.

• Panda, S., B. B. Biswal, S. D. Jena, and D. Mishra. “An approach to weight optimization of a spur gear”, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231. (2), pp.189-202, 2017.

• B. Gunji, B. B. V. L Deepak, M V A Raju Bahubalendruni, and B. B. Biswal. “Hybridized genetic-immune based strategy to obtain optimal feasible assembly sequences”, International Journal of Industrial Engineering Computations, vol.8. (3), pp.333-346, 2017.

• A. Das et al. “Comparative assessment on machinability aspects of AISI 4340 alloy steel using uncoated carbide and coated cermet inserts during hard turning”, Arabian Journal for Science and Engineering, vol. 41.(11), pp. 4531-4552, 2016.

• M V A Raju Bahubalendruni and B B Biswal. “Computer aid for stability testing between parts towards automatic assembly sequence generation”, Journal of Computer Technology & Applications, vol.7.(1), pp. 22-26, 2016.

• B B V L Deepak, M V A Raju Bahubalendruni. & B B Biswal., “Development of in-pipe robots for inspection and cleaning tasks: Survey, classification and comparison”, International Journal of Intelligent Unmanned Systems, vol. 4 (3), pp.182-210, 2016.

• M. Kumar, M V A Raju Bahubalendruni, B. B. Biswal, and R. Nayak. “Identification of Stable Configurations between Constituent Parts of an Assembly”, Applied Mechanics & Materials, vol. 852, 2016.


119

• M V A Raju Bahubalendruni, B B V L Deepak, and B B Biswal, “An advanced immune based strategy to obtain an optimal feasible assembly sequence”, Assembly Automation, vol. 36. (2), pp.127-137, 2016.

• B. N. Panda, M V A Raju Bahubalendruni, B. B. Biswal, and Marco Leite. “A CAD-based approach for measuring volumetric error in layered manufacturing”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406216634746, 2016.

• M V A Raju Bahubalendruni, and B. B. Biswal. “A review on assembly sequence generation and its automation”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 230. (5), pp. 824-838, 2016.

• A. P. Chakraverty, U. K. Mohanty, S. C. Mishra, and B. B. Biswal. “Effect of Post-thermal shock on Prolonged Sea Water aged GFRP Composite”, In IOP Conference Series: Materials Science and Engineering, vol. 115. (1), pp. 012004, 2016.

• M V A Raju Bahubalendruni, and B B Biswal. “An intelligent approach towards optimal assembly sequence generation”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 0954406216684159, 2016.

• C. Upadhyay, S. Datta, B. B. Biswal, and Siba Sankar Mahapatra. “Machining Performance Optimization for Electro Discharge Machining of Inconel 625: A Case Experimental Study”, 2016.

• R. Nayak, M V A Raju Bahubalendruni, B B Biswal, and P P Chauhan. “An Approach towards Economized 3D Printing”, In Applied Mechanics and Materials, Trans Tech Publications, vol. 852, pp. 185-191, 2016.

• M V A Raju Bahubalendruni, and B. B. Biswal, “Liaison concatenation–A method to obtain feasible assembly sequences from 3D-CAD product”, Sadhana, vol. 41. (1), pp. 67-74, 2016.

• Govinda Rao, P., Srinivasa Rao, P., & Deepak, B. “GRNN-Immune Based Strategy for Estimating and Optimizing the Vibratory Assisted Welding Parameters to Produce Quality Welded Joints”, Engineering Journal. Vol. 21(3),pp. 251-267, 2017.

• B.B.V.L, Deepak., & Bahubalendruni, M. R. “Numerical Analysis for Force Distribution along the Swing Jaw Plate of a Single Toggle Jaw Crusher”, World Journal of Engineering, vol.14(3), pp. 255-260, 2017.

• Deepak, B. B. V. L., Deepak, B. B. V. L., Bahubalendruni, R. M., Bahubalendruni, R. M., Rao, C. A., Rao,C.A.,&Nalini, J. “Computer aided weld seam tracking approach”, Journal of Engineering, Design and Technology, vol. 15(1), pp. 31-43, 2017.

• Bendu, H., Deepak, B. B. V. L., & Murugan, S. “Multi-objective optimization of ethanol fuelled HCCI engine performance using hybrid GRNN–PSO”, Applied Energy, vol. 187, pp. 601-611, 2017.

• Rao, B. B., Raju, V. R., & Deepak, B. B. V. L. “Estimation and optimization of heat transfer and overall pressure drop for a shell and tube heat exchanger”, Journal of Mechanical Science and Technology, vol. 1(31), pp. 375-383, 2017.

• B.B.V.L, Deepak, Nayak, & Patra, S. K. “Development of obstacle-avoiding robots using RF technology”, International Journal of Intelligent Unmanned Systems, vol. 4(4), pp. 214-225, 2016.

• Bala Bhaskara Rao, J., Ramachandra Raju, V., & Deepak, B. B. V. L. “A smart prediction tool for estimating heat transfer and overall pressure drop from shell-and-tube heat exchanger”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 0954408916656388, 2016.

• Bendu, H., Deepak, B. B. V. L., & Murugan, S. “Application of GRNN for the prediction of performance and exhaust emissions in HCCI engine using ethanol”, Energy Conversion and Management, vol. 122, pp. 165-173, 2016.

• B.B.V.L, Deepak, & Singh, P. “A survey on design and development of an unmanned aerial vehicle (quadcopter)”, International Journal of Intelligent Unmanned Systems, vol. 4(2), pp. 70-106, 2016.

• Deepak, B. B. V. L., & Parhi, D.R. “Control of an automated mobile manipulator using artificial immune system”, Journal of Experimental & Theoretical Artificial Intelligence, vol. 28(1-2), pp. 417-439, 2016.

• Deepak B. B. V. L, M V A Raju Bahubalendruni, “Development of a Path Follower in Real Time Environment”,World Journal of Engineering, vol. 14(4), https://doi.org/10.1108/WJE-07-2016-0029, 2017.

• D. P. Jena, and S. N. Panigrahi; “Numerically estimating acoustic transmission loss of a reactive muffler with and without mean flow”, Measurement, vol. 109, pp. 168-186, 2017.

Publications in Conferences• A. Jena, P. K. Sahu, S. C. Bharat, and B. B. Biswal, “Optimal trajectory planning of a 3R SCARA manipulator using geodesic.”

In Power Electronics, Intelligent Control and Energy Systems (ICPEICES), IEEE International Conference on, pp. 1-6, 2016.

• Allaparthi Muddu, Khan Mohammed Rajik & Brahma Teja, “Three-Dimensional Finite element dynamic analysis for micro drilling of multi-layer printed circuit board material”, International Conference on Emerging Trends in Materials & Manufacturing Engineering (iMME17), NIT Tiruchirappalli, TN, India, March 10- 12, 2017.


120

• Mohammed Rajik Khan, Biswaksen Patnaik and Sonalisa Patel, “Design and ergonomic analysis of a novel sit-to-stand and mobility assistive device for ambulation and elderly”, 6th International Conference on Research into Design (ICoRD’17), Indian Institute of Technology Guwahati, Assam, January 09-11, 2017, Published in Proceedings of ICoRD 2017 – Research into Design for Communities, Volume 1, Smart Innovation, Systems and Technologies 65, pp.801-811, Springer India (DOI 10.1007/978-981-10-3518-0_69).

• Bisht Dhananjay S & Khan Mohammed Rajik , “Anatomically shaped tool handles designed for power grip”, 6th International Conference on Research into Design (ICoRD’17), Indian Institute of Technology Guwahati, Assam, January 09-11, 2017, Published in Proceedings of ICoRD 2017 – Research into Design for Communities, Volume 1, Smart Innovation, Systems and Technologies 65, pp.135-148, Springer India (DOI 10.1007/978-981-10-3518-0_12).

• Khan Mohammed Rajik, Alok Raj, Md. Mosarraf Hossain, Satendra Kumar & Archana Sharma, “Distribution of electromagnetic field and pressure of single turn circular coil for magnetic pulse welding using FEM”, Proceedings of the 6th International and 27th All India Manufacturing Technology, Design & Research Conference - 27thAIMTDR, College of Engineering, Pune, India, December 16-18, 2016, pp. 126-130, ISBN:978-93-86256-27-0.

• Allaparthi Muddu, Khan Mohammed Rajik & A. Shyamnarayan, “FE Modal and Harmonic Analysis of Micro Drill with Ultrasonic Horn”, The 1st International Conference on Materials Design and Applications (MDA 2016), Porto, Portugal, 30 June - 1 July 2016 (Published in Advanced Structured Materials 65, pp. 281-293, DOI 10.1007/978-3-319-50784-2_21 (Springer).

• Bala Murali, G, Deepak, B B V L, Raju Bahubalendruni, M V A and Biswal, B B, “Optimal Assembly Sequence Planning Using Hybridized Immune-Simulated Annealing Technique”, 1st International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM 2017), MLRIT,Hyderabad, Telangana, India, 7-9 July 2016.

• Bala Murali, G, Deepak, B B V L, Raju Bahubalendruni, M V A and Biswal, B B, “Optimal Assembly Sequence Planning Towards Design for Assembly Using Simulated Annealing Technique”, 6th International Conference on Research into Design (ICoRD 2017), IIT Guwahati, Assam, India, 9-11 January 2017.

• Bala Murali, G, Deepak, B B V L and Bijaya Kumar Khamari, “Integrated Design for Assembly Approach Using Ant Colony Optimization Algorithm for Optimal Assembly Sequence Planning”, 4th International Conference on Computational Intelligence in Data Mining(ICCIDM-2017) , VSSUT Burla ,Odhisa, India.

Paper Accepted For Publication • G. Bala Murali., Deepak, B., Bahubalendruni, M., & Biswal, B. “An Optimal Assembly Sequence Planning By Assembly

Subsets Detection Method Using Teaching Learning Based Optimization Algorithm”, IEEE Transactions Automation Science and Engineering.

• G.Bala Murali., Deepak, B., Bahubalendruni, M., & Biswal, B. “Assembly Sequence Planning Using Soft Computing Methods: A Review”, Journal Process Mechanical Engineering.

• Khan Mohammed Rajik, Alok Raj, Md. Mosarraf Hossain, Satendra Kumar & Archana Sharma, “Distribution of electromagnetic field and pressure of single turn circular coil for magnetic pulse welding using FEM”, Springer India 2017, U.S. Dixit and R. Ganesh Narayanan (eds.), Strengthening and joining by plastic deformation - select papers from AIMTDR 2016, to be published.

Books/Book Chapter • Bala Murali, G, Deepak, B B V L, Raju Bahubalendruni, M V A and Biswal, B B, “Optimal Assembly Sequence Planning

Towards Design for Assembly Using Simulated Annealing Technique”, 6th International Conference on Research into Design (ICoRD 2017), IIT Guwahati, Assam, India, 9-11 January 2017.

• Bahubalendruni, MVA Raju, Bibhuti Bhusan Biswal, Manish Kumar, and B. B. V. L. Deepak. “A note on mechanical feasibility predicate for robotic assembly sequence generation”, In CAD/CAM, Robotics and Factories of the Future, pp. 397-404. Springer, New Delhi, 2016.

• Allaparthi Muddu, Khan Mohammed Rajik & A. Shyamnarayan, “FE Modal and Harmonic Analysis of Micro Drill with Ultrasonic Horn”, Springer International Publishing AG 2017, Lucas F.M. da Silva (ed.), Advanced Structured Materials 65, pp. 281-293, DOI 10.1007/978-3-319-50784-2-21.

• Mohammed Rajik Khan, Biswaksen Patnaik and Sonalisa Patel, “Design and ergonomic analysis of a novel sit-to-stand and mobility assistive device for ambulation and elderly”, Springer Nature Singapore Pte Ltd. 2017, A. Chakrabarti and D. Chakrabarti (eds.), Research into Design for Communities, Volume 1, Smart Innovation, Systems, and Technologies 65, pp. 801-811, DOI 10.1007/978-981-10-3518-0_69.

• Bisht Dhananjay S & Khan Mohammed Rajik , “Anatomically shaped tool handles designed for power grip”, Springer Nature Singapore Pte Ltd. 2017, A. Chakrabarti and D. Chakrabarti (eds.), Research into Design for Communities, Volume 1, Smart Innovation, Systems, and Technologies 65, pp. 135-148, DOI 10.1007/978-981-10-3518-0-12.


121

• Deepak B.B.V.L., Rao C.A., Raju B.M.V.A., Singh P.K. (2016) Kinematic Modeling and Simulation of Manipulator for Executing Welding Operations with Arbitrary Weld Joint Profiles. In: Lobiyal D., Mohapatra D., Nagar A., Sahoo M. (eds) Proceedings of the International Conference on Signal, Networks, Computing, and Systems. Lecture Notes in Electrical Engineering, vol 396. pp 291-299 , Springer, New Delhi DOI 10.1007/978-81-322-3589-7-32.

• Deepak B.B.V.L., Parhi D.R., Praksh R. (2016) Kinematic Control of a Mobile Manipulator. In: Lobiyal D., Mohapatra D., Nagar A., Sahoo M. (eds) Proceedings of the International Conference on Signal, Networks, Computing, and Systems. Lecture Notes in Electrical Engineering, vol 396, pp 339-346. Springer, New Delhi DOI 10.1007/978-81-322-3589-7-38.

• Deepak B.B.V.L., Raviteja G., Behera U., Prakash R. (2017) Development of a General Search Based Path Follower in Real Time Environment. In: Lobiyal D., Mohapatra D., Nagar A., Sahoo M. (eds) Proceedings of the International Conference on Signal, Networks, Computing, and Systems. Lecture Notes in Electrical Engineering, vol 395, pp 315-322 Springer, New Delhi DOI 10.1007/978-81-322-3592-7-32.

Patent:


By faculty: • Received best technical paper award for the research paper “Three-Dimensional Finite element dynamic analysis for micro

drilling of multi-layer printed circuit board material” presented in International Conference on Emerging Trends in Materials & Manufacturing Engineering (iMME17), NIT Tiruchirappalli, TN, India, March 10- 12, 2017.

• Received merit award for most distinguish paper for the research paper “Anatomically shaped tool handles designed for power grip” presented in 6th International Conference on Research into Design (ICoRD’17) at Indian Institute of Technology Guwahati, Assam, January 09-11, 2017.

• Received a gift voucher of EUR 150 as a felicitation for winning the distinguish paper award at 6th International Conference on Research into Design (ICoRD’17) 09th -11th January 2017 at Indian Institute of Technology Guwahati.

• Received BRUNDANBAN SAHU MEMORIAL AWARD for the paper ‘An Intelligent strategy for automated assembly sequence planning while considering DFA concept’ Awarded by: IEI-Odisha center. Year:2017.

• Received merit award for most distinguish paper for ‘Optimal assembly sequence planning towards design for assembly’ in ICoRD-2017 during 9th-11th January 2017 held at IIT Guwahati.

Students: • Received best technical paper award for the research paper “Three-Dimensional Finite element dynamic analysis for micro

drilling of multi-layer printed circuit board material” presented in International Conference on Emerging Trends in Materials & Manufacturing Engineering (iMME17), NIT Tiruchirappalli, TN, India, March 10- 12, 2017.

• Received merit award for most distinguish paper for the research paper “Anatomically shaped tool handles designed for power grip” presented in 6th International Conference on Research into Design (ICoRD’17) at Indian Institute of Technology Guwahati, Assam, January 09-11, 2017.

• Received a gift voucher of EUR 150 as a felicitation for winning the distinguish paper award at 6th International Conference on Research into Design (ICoRD’17) 09th -11th January 2017 at Indian Institute of Technology Guwahati.

• Received Brundanban Sahu memorial award for the paper ‘An Intelligent strategy for automated assembly sequence planning while considering DFA concept’ Awarded by: IEI-Odisha center. Year:2017.

• Received merit award for most distinguish paper for the research paper ‘Optimal assembly sequence planning towards design for assembly’ in ICoRD-2017 during 9th-11th January 2017 held at IIT Guwahati.

Technical association / societies:


122

SEMINAR, SYMPOSIA, WINTER SCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS

RESEARCH PROJECTS Name of the project Sponsoring

agencyName of the PI Total value

(Rs. In lakhs)Start Date Close Date

Design and fabrication of a novel scoop stretcher for full body Immobilization during causality transfer

ICMR Prof. M. R. Khan 16.95 Apr 2017 Mar 2019

Electromagnetic welding (EMW) coil design & characterization from mechanical and metallurgical aspects for tubular jobs of ODS alloy with other materials

ATC, BRNS Prof. M. R. Khan 21,49 2015 2018

Development of laser sensor based robotic welding for producing quality welded joints

BRNSProf. B. B. Biswal 39.44 2016 2019

Development of an Intelligent Drone System for Pesticide Spraying Application in Precession Agriculture

DST-ECR Prof. B. B. V. L Deepak

19.39 2017 2020

Design and fabrication of a metamaterial based acoustic cloak to skin a hollow aluminum cylinder from SONAR ranging 10 Hz to 20 kHz in ideal water medium

NRB Dr. D.P. Jena 24.9 2016 2019

Design development and fabrication of acoustic signature based gunshot detection system for sniper using microphone array

DST Dr. D.P. Jena 22 2016 2019

CONSULTANCY SERVICES Sponsors address Title of the project Faculty name

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCE Name of the project Sponsoring agency Name of the

coordinatorTotal value (Rs. In

lakhs)Start date Close date


123

MAJOR EQUIPMENT ACQUIRED Sl.No. Laboratory Major Equipment Quantity

1 Computer Aided Design Laboratory NIL NIL2 Art, Design & Aesthetics Laboratory NIL NIL3 Creative Automation Laboratory NIL NIL4 Software Laboratory NIL NIL5 Ergonomics & Simulation Laboratory NIL NIL6 Product Design & Development Laboratory NIL NIL7 Electromagnetic Welding Laboratory NIL NIL8 Industrial Acoustics Laboratory General purpose, ceramic shear ICP type

accelerometer (PCB)1

Tri-axial ICP type accelerometer (PCB) 1General purpose Modal Analysis impact hammer

(PCB). 1

Microphone with integral preamplifier 1USB based simultaneous data acquisition board 1Four-channel dynamic signal acquisition module 1

Compact single slot USB Chassis for Four-channel dynamic signal

1

LIST OF LABORATORIES Sl. No. Name of the Laboratories1. Computer Aided Design Laboratory

2. Art, Design & Aesthetics Laboratory

3. Creative Automation Laboratory

4. Software Laboratory

5. Ergonomics & Simulation Laboratory

6. Product Design & Development Laboratory

7. Electromagnetic Welding Laboratory (R&D Project Lab)

8. Industrial Acoustics Laboratory (R&D Project Lab)

PH.D. DEGREES AWARDED BY THE DEPARTMENT: Sl.No. Name of the student Title of Thesis Supervisor

1 M V A Raju Bahubalendruni

Computer Aided Optimal Robotic Assembly Sequence Generation

Prof. Bibhuti Bhusan Biswal

2 Soma Dalbehera Effect of Cenosphere on the Mechanical and Tribological Properties of Natural Fiber Reinforced Hybrid Composite

Prof. Samir Kumar Acharya

3 Bunil Kumar Balabantaray

Design and Development of Robotic Part Assembly System under Vision Guidance

Prof. Bibhuti Bhusan Biswal

4 Om Prakash Sahu Design and Development of a sensor integrated robotic hand Prof. Bibhuti Bhusan Biswal

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENT Name of the student Title of Thesis Supervisor


124

Department of LIFE SCIENCE


205 | P a g e





27

12

18

0

5

10

15

20

25

30

M.Sc. (2 Years) Int. M.sc. Ph.D.

48

57

42

44

46

48

50

52

54

56

58



205 | P a g e





27

12

18

0

5

10

15

20

25

30

M.Sc. (2 Years) Int. M.sc. Ph.D.

48

57

42

44

46

48

50

52

54

56

58



206 | P a g e

FACULTY


1Prof. Samir Kumar Patra ([email protected])Associate Professor, Ph.D. (Kalyani University); Postdoc (UCSF, USA); McGill Univ.(Canada)(Epigenetics & Cancer Genomics)

2Prof. Sujit Kumar Bhutia ([email protected])Assistant Professor, Ph.D (IIT Kharagpur)(Cancer & Cell Death)

3Prof. Surajit Das ([email protected])Assistant Professor , Ph.D. (Annamalai University)(Environmental Biotechnology, Marine microbiology, Fish Biotechnology, Biodiversity and Ecology)

4Prof. Bibekanand Mallick ([email protected])Assistant Professor, Ph.D. (IACS, Kolkata)(RNAi, Stem cell and Cancer, Next-gen Seq, Epigenomics, Molecular biology and Bioinformatics)

5Prof.(Ms.) Bismita Nayak ([email protected])Assistant Professor, Ph.D. (IIT Delhi)(Immunology, Nanobiotechnology, Drug/Vaccine delivery, Biomedical Applications)

6Prof. Suman Jha ([email protected])Assistant Professor, Ph.D. (MPI, Germany)(Protein conformational dynamics (folding/misfolding); Protein-protein/nanoparticle/metal ion interactions)

7Prof. R Jayabalan ([email protected])Assistant Professor, Ph.D (Bharathiar University)(Food Sciences and Technology, Alternative Fuels, microbial products, Microemulsion systems)

8Prof. Binod Bihari Sahu ([email protected])Assistant Professor, Ph.D (ILS, Bhubaneswar)(Plant Immunity, Non-host resistance during plant-pathogen interaction and mechanism of PCD)

2

1 1

0

0.5

1

1.5

2

2.5

Aakash Institute Chinmaya Vidyalaya iBooks


125

FACULTYSL Name & Specialization1 Prof. Samir Kumar Patra ([email protected])

Associate Professor, Ph.D. (Kalyani University); Postdoc (UCSF, USA); McGill Univ.(Canada)(Epigenetics & Cancer Genomics)

2 Prof. Sujit Kumar Bhutia ([email protected])Assistant Professor, Ph.D (IIT Kharagpur)(Cancer & Cell Death)

3 Prof. Surajit Das ([email protected])Assistant Professor , Ph.D. (Annamalai University)(Environmental Biotechnology, Marine microbiology, Fish Biotechnology, Biodiversity and Ecology)

4 Prof. Bibekanand Mallick ([email protected])Assistant Professor, Ph.D. (IACS, Kolkata)(RNAi, Stem cell and Cancer, Next-gen Seq, Epigenomics, Molecular biology and Bioinformatics)

5 Prof.(Ms.) Bismita Nayak ([email protected])Assistant Professor, Ph.D. (IIT Delhi)(Immunology, Nanobiotechnology, Drug/Vaccine delivery, Biomedical Applications)

6 Prof. Suman Jha ([email protected])Assistant Professor, Ph.D. (MPI, Germany)(Protein conformational dynamics (folding/misfolding); Protein-protein/nanoparticle/metal ion interactions)

7 Prof. R Jayabalan ([email protected])Assistant Professor, Ph.D (Bharathiar University)(Food Sciences and Technology, Alternative Fuels, microbial products, Microemulsion systems)

8 Prof. Binod Bihari Sahu ([email protected])Assistant Professor, Ph.D (ILS, Bhubaneswar)(Plant Immunity, Non-host resistance during plant-pathogen interaction and mechanism of PCD)

9 Prof. Mohammed Saleem ([email protected])Assistant Professor, Ph.D. (University of Münster, Germany)(Membrane-protein interactions, Endocytosis, Neurodegeneration, Host-pathogen interactions, Membrane Mechanics)

10 Prof. Rohan Dhiman ([email protected])Assistant Professor, Ph.D. (Institute of Microbial Technology, Chandigarh)(Host-pathogen interaction in M. tuberculosis infection, Autophagy, Microbial Immunology, Innate and adaptive immunity in tuberculosis)

11 Prof. Monalisa Mishra ([email protected])Assistant Professor , Ph.D (International University Bremen, Germany)(Cell and Developmental Biology)

12 Prof.(Ms.) Vidya Devi Negi ([email protected])Assistant Professor, Ph.D (IISc,Bangalore)(Infection biology and immunological modulation by infection during pregnancy and neonatal development)

13 (Prof. Bijesh Kumar Biswal ([email protected]) Assistant Professor , Ph.D (IIT Madras)Cancer and Stem Cell Biology)

PUBLICATIONS

Publications in Journals• Das L, Parbin S, Pradhan N, Kausar C and Patra SK (2017) Epigenetics of reproductive infertility. Front Biosci (Schol Ed). 9:

509-535.

• Shilpi A, Bi Y, Jung S, Patra SK, and Davuluri RV (2017) Identification of genetic and epigenetic variants associated with breast cancer prognosis by integrative bioinformatics analysis, Cancer Informatics, 16: 1–13.

• Kar S, Deb M, Sengupta D, Pradhan N and Patra SK* (2017) SOX2 function and Hedgehog signaling pathway are co-conspirators in promoting Androgen independent prostate cancer. Biochim Biophys Acta. 1863: 253-265.

• Patra SK*, Sengupta D, Kar S, Deb M, Kausar C (2017) Interaction of phospholipase C with liposome: A conformation transition of the enzyme is critical and specific to liposome composition for burst hydrolysis and fusion in concert. Spectrochim Acta A Mol Biomol Spectrosc. 173: 647-654.


126

• Sengupta D, Deb M, Rath SK, Kar S, Shilpi A, Parbin S, Pradhan N, and Patra SK* (2016) DNA methylation and not H3K4 trimethylation dictates the expression status of miR-152 gene which inhibits migration of breast cancer cells via DNMT1/CDH1 loop. Exp Cell Research, 346: 176-187.

• Deb M, Sengupta D, Kar S, Rath, SK, Roy S, Das G, and Patra SK (2016) Epigenetic drift towards histone modifications regulates CAV1 gene expression in colon cancer. Gene, 581: 75-84.

• Mukhopadhyay S, Schlaepfer IR, Bergman BC, Panda PK, Praharaj PP, Naik PP, Agarwal R, Bhutia SK (2017) ATG14 facilitated lipophagy in cancer cells induce ER stress mediated mitoptosis through a ROS dependent pathway. Free Radic Biol Med. 104:199-213.

• Sinha N, Panda PK, Naik PP, Das DN, Mukhopadhyay S, Maiti TK, Shanmugam MK,

• Chinnathambi A, Zayed ME, Alharbi SA, Sethi G, Agarwal R, Bhutia SK (2017). Abrus agglutinin promotes irreparable DNA damage by triggering ROS generation followed by ATM-p73 mediated apoptosis in oral squamous cell carcinoma. Mol Carcinog. doi: 10.1002/mc.22679. [Epub ahead of print].

• Sinha N, Panda PK, Naik PP, Maiti TK, Bhutia SK (2017) Abrus agglutinin targets cancer stem-like cells by eliminating self-renewal capacity accompanied with apoptosis in oral squamous cell carcinoma. Tumour Biol. 39(5):1010428317701634.

• Das DN, Panda PK, Naik PP, Mukhopadhyay S, Sinha N, Bhutia SK (2017) Phytotherapeutic approach: a new hope for polycyclic aromatic hydrocarbons induced cellular disorders, autophagic and apoptotic cell death. Toxicol Mech Methods 27(1):1-17.

• Naik PP, Das DN, Panda PK, Mukhopadhyay S, Sinha N, Praharaj PP, Agarwal R, Bhutia SK (2016) Implications of cancer stem cells in developing therapeutic resistance in oral cancer. Oral Oncol. 62:122-135.

• Das DN, Naik PP, Nayak A, Panda PK, Mukhopadhyay S, Sinha N, Bhutia SK (2016). Bacopa monnieri-Induced Protective Autophagy Inhibits Benzo[a]pyrene-Mediated Apoptosis. Phytother Res. 30(11):1794-1801.

• Mukhopadhyay S, Naik PP, Panda PK, Sinha N, Das DN, Bhutia SK (2016) Serum starvation induces anti-apoptotic cIAP1 to promote mitophagy through ubiquitination. Biochem Biophys Res Commun. 479(4):940-946.

• Das DN, Sinha N, Naik PP, Panda PK, Mukhopadhyay S, Mallick SK, Sarangi I, Bhutia SK (2016) Mutagenic and genotoxic potential of native air borne particulate matter from industrial area of Rourkela city, Odisha, India. Environ Toxicol Pharmacol. 46:131-139.

• Panda PK, Behera B, Meher BR, Das DN, Mukhopadhyay S, Sinha N, Naik PP, Roy B, Das J, Paul S, Maiti TK, Agarwal R, Bhutia SK (2017) Abrus Agglutinin, a type II ribosome inactivating protein inhibits Akt/PH domain to induce endoplasmic reticulum stress mediated autophagy-dependent cell death. Mol Carcinog. 56(2):389-401.

• Bhutia SK, Behera B, Nandini Das D, Mukhopadhyay S, Sinha N, Panda PK, Naik PP, Patra SK, Mandal M, Sarkar S, Menezes ME, Talukdar S, Maiti TK, Das SK, Sarkar D, Fisher PB (2016) Abrus agglutinin is a potent anti-proliferative and anti-angiogenic agent in human breast cancer. Int J Cancer 139(2):457-466.

• Mukhopadhyay S, Sinha N, Das DN, Panda PK, Naik PP, Bhutia SK (2016) Clinical relevance of autophagic therapy in cancer: Investigating the current trends, challenges, and future prospects. Crit Rev Clin Lab Sci. 53(4):228-52.

• Dash, H. R., S. Basu and S. Das (2017). Evidence of mercury trapping in biofilm-EPS and mer operon based volatilization of inorganic mercury in a marine bacterium Bacillus cereus BW-201B. Archives of Microbiology, 199: 445-455.

• Samanta, M., M. Basu, B. Swain, M. Paichha, S. S. Lenka, S. Das, P. Jayashankar and N. K. Maiti, (2017). Molecular cloning and characterization of LrTLR4, analysis of its inductive expression and associated down-stream signalling molecules following lipopolysaccharide stimulation and Gram-negative bacterial infection. Fish Shellfish Immunol., 60: 164176.

• Dash, H. R. and S. Das (2016). Interaction between mercuric chloride and extracellular polymers of biofilm-forming mercury resistant marine bacterium Bacillus thuringiensis PW-05. RSC Adv., 6: 109793-109802.

• Mohapatra, S., D. P. Samantaray, S. M. Samantaray, B. B. Mishra, S. Das, S. Majumdar, S. K. Pradhan, S. N. Rath, C. C. Rath, J. Akthar and G. Achary (2016). Structural and thermal characterization of PHAs produced by Lysinibacillus sp. through submerged fermentation process. Int. J. Biol. Macromol., 93: 1161-1167.

• Basu, M., S. S. lenka, M. Paichha, B. Swain, B. Patel, R. Banerjee, P. Jayasankar, S. Das and M. Samanta (2016). B cell activating factor is induced by toll-like receptor and NOD-like receptor-ligands and plays critical role in IgM synthesis in Labeo rohita. Mol. Immunol., 78: 9-26.

• Basu, M., S. S. Lenka, M. Paichha, B. Swain, B. Patel, R. Banerjee, P. Jayasankar, S. Das and M. Samanta (2016). Immunoglobulin (Ig) D in Labeo rohita is widely expressed and differentially modulated in viral, bacterial and parasitic antigenic challenges. Vet. Immunol. Immunopathol. 179: 77-84.

• Patel, B., R. Banerjee, M. Basu, S. Lenka, M. Samanta and S. Das* (2016). Molecular cloning of IgZ heavy chain isotype in Catla catla and comparative expression profile of IgZ and IgM following pathogenic infection. Microbiology and Immunology 60 (8): 561- 567.


127

• Samantarrai D, Mallick B (2017) miR-429 inhibits metastasis by targeting KIAA0101 in Soft Tissue Sarcoma. Exp Cell Res. 357(1):33-39.

• Roy J, Mallick B (2017). Altered gene expression in late-onset Alzheimer’s disease due to SNPs within 3’UTR microRNA response elements. Genomics 109(3-4):177-185.

• Roy J, Sarkar A, Parida S, Ghosh Z, Mallick B (2017) Small RNA sequencing revealed dysregulated piRNAs in Alzheimer’s disease and their probable role in pathogenesis. Mol Biosyst. 13(3):565-576.

• Sahu M, Mallick B (2016) An integrative approach predicted co-expression sub-networks regulating properties of stem cells and differentiation. Comput Biol Chem. 64:250-262.

• Arakha, M., Roy, J., Nayak, P.S., Mallick, B. & Jha, S (2017) Zinc oxide nanoparticle energy band gap reduction triggers the oxidative stress resulting into autophagy-mediated apoptotic cell death. Free Radical Biology and Medicine, 110, 42053.

• Arakha, M., Borah, S.M., Saleem, M., Jha, A.N. & Jha, S (2016) Interfacial assembly at silver nanoparticle enhances the antibacterial efficacy of nisin. Free Radical Biology and Medicine, 101, 434-445.

• Prince A, Sandhu P, Kumar P, Dash E, Sharma S, Arakha M, Jha S, Akhter Y, Saleem M*. Lipid-II Independent Antimicrobial Mechanism of Nisin Depends On Its Crowding And Degree Of Oligomerization. Scientific Reports. 2016 Nov 29;6:37908. Highlighted by Indiabioscience.org (https://indiabioscience.org/news/2017/understanding-our-weapons-against-bacteria).

• Chandni Kumari, Bhaskar Das, R. Jayabalan, Robin Davis, Pradip Sarkar. “Effect of Nonureolytic Bacteria on Engineering Properties of Cement Mortar”, Journal of Materials in Civil Engineering, vol. 29, no. 6, pp. 06016024, 2017.

• Ipsita Panda, Surabhi, J., Sarat Kumar Das, R. Jayabalan. “Characterization of red mud as a structural fill and embankment material using bioremediation”, International Biodeterioration and Biodegradation, vol. 119, pp. 368-376, 2017.

• Sahoo Moumita, Kamila Goderska, Eldin M. Johnson, Bhaskar Das, Dash Indira, Rina Yadav, Savitri Kumari, R. Jayabalan. “Evaluation of the viability of free and encapsulated lactic acid bacteria using in-vitro gastro intestinal model and survivability studies of synbiotic microcapsules in dry food matrix during storage”, LWT Food Science and Technology, vol. 77, pp. 460-467, 2017.

• Sourav Das, Sayantan Sinha, Bhaskar Das, R. Jayabalan, Mrutyunjay Suar, Amrita Mishra, Ashok J. Tamhankar, Cecilia Stålsby Lundborg, Suraj K. Tripathy. “Disinfection of Multidrug Resistant Escherichia coli by SolarPhotocatalysis using Fe-doped ZnO Nanoparticles”, Scientific Reports, vol. 7, pp. 104. DOI:10.1038/s41598-017-00173-0, 2017.

• Yugal K. Mohanta, Sujogya K. Panda, Rasu Jayabalan, Nanacha Sharma, Akshaya K. Bastia, Tapan K. Mohanta. “Antimicrobial, Antioxidant and Cytotoxic Activity of Silver Nanoparticles Synthesized by Leaf Extract of Erythrina suberosa (Roxb.)”, Front. Mol. Biosci. https://doi.org/10.3389/fmolb.2017.00014, 2017.

• Binod B. Sahu, Subodh K. Srivastava, Prashant Singh, Jordan L. Baumbach, Xiaoping Yi, and Madan K. Bhattacharyya (2017) Investigation of the Fusarium virguliforme Transcriptomes Induced during Infection of Soybean Roots Suggests that Enzymes with Hydrolytic Activities Could Play a Major Role in Root Necrosis. PLoS ONE. January 17, http://dx.doi.org/10.1371/journal.pone.0169963.

• Micheline N. Ngaki, Bing Wang, Binod B. Sahu, Subodh K. Srivastava, Mohammad S. Farooqi, Sekhar Kambakam, Sivakumar Swaminathan, Madan K. Bhattacharyya (2016) Tanscriptomic study of the soybean-Fusarium virguliforme interaction revealed a novel ankyrin-repeat containing defense gene, expression of whose during infection led to enhanced resistance to the fungal pathogen in transgenic soybean plants. PLoS ONE 11(10): doi: e0163106. doi:10.1371/journal.pone.0163106.

• Mishra M, Sabat D, Ekka B, Sahu S, Unnikanan P, Dash P. Oral intake of Zirconia nanoparticle alters neuronal development and behavior of Drosophila melanogaster. Journal of Nanoparticle Research July 2017, (In press).

• Pappus SA, Ekka B, Sahu S, Sabat D, Dash P, Mishra M. A toxicity assessment of hydroxyapatite nanoparticles on development and behavior of Drosophila melanogaster. Journal of Nanoparticle Research. April 2017, 19:136.

• Sultan E, Sabat D, Sahu B, Mishra M. “Structural Variations in Wing Patterning of Seasonal Polyphenic Melanitis leda (Satyrinae).” Microscopy Research 4.04 (2016): 47.

• Sabat D, Patnaik A, Ekka B, Dash P, Mishra M. Investigation of titania nanoparticles on behaviour and mechanosensory organ of Drosophila melanogaster. Physiology and Behaviour 2016 Sep 5;167:76-85.

• S.Seetha, S.Sahu, B.B. Mahapatra, M. Mishra. Post embryonic changes in the eye of an economic mango plant pest Amritodus atkinsoni Leth. (Hemiptera: Cicadellidae). Springer Proceedings Phys., Vol. 186, Zehra Banu Bahsi and Ahmet Yavuz Oral (Eds): 3RD INTERNATIONAL MULTIDISCIPLINARY MICROSCOPY AND MICROANALYSIS CONGRESS (INTERM), Nov. 2016. PP. 25-31.

• D. Sabat, S. Millan, P. S. Setthy, S. Marathe, H. Sahoo, M. Mishra. Elemental Analysis of Various Feathers of Indian Rose Ringed ParakeetPsittacula krameri. Springer Proceedings Phys., Vol. 186, Zehra Banu Bahsi and Ahmet Yavuz Oral (Eds): 3RD international multidisciplinary microscopy and microanalysis congress (INTERM), Nov.2016. PP. 33-40.


128

• Sarbani Ashe, Debasis Nayak, Manisha Kumari, Bismita Nayak (2016) “Ameliorating effects of green synthesized silver nanoparticles on glycated end product induced ROS production and cellular toxicity in osteogenic Saos-2 cells”. ACS Applied Materials & Interfaces (IF: 7.14) DOI: 10.1021/acsami.6b10639.

• Debasis Nayak, Sarbani Ashe, Pradipta Ranjan Rauta, Bismita Nayak (2016). “Assessment of antioxidant, antimicrobial and anti-osteosarcoma potential of four traditionally used Indian medicinal plants”. Journal of applied Biomedicine (Accepted) DOI: 10.1016/j.jab.2016.10.005.

• Debasis Nayak, Manisha Kumari, Sripathi Rajachandar, Sarbani Ashe, Neethi C Thathapudi, Bismita Nayak* (2016), Biofilm Impeding AgNPs Target Skin Carcinoma by Inducing Mitochondrial Membrane Depolarization Mediated through ROS Production, ACS Applied Materials & Interfaces DOI: 10.1021/acsami.6b11391.

• Pradipta R. Rauta, Bismita Nayak, Gabriel A. Monteiro, Marília Mateus (2016), Design and characterization of plasmids encoding antigenic peptides of Aha1 from Aeromonas hydrophila as prospective fish vaccines, Journal of Biotechnology.

• Pradipta Ranjan Rauta, Sarbani Ashe, Debasis Nayak, Bismita Nayak (2016), In Silico identification of outer membrane protein (Omp) and subunit vaccine design against pathogenic Vibrio cholera, Computational Biology and Chemistry, Volume 65 (2016) 61-68.

• Debasis Nayak, Ankita Boxi, Sarbani Ashe, Neethi Chandra Thathapudi, Bismita Nayak (2016). “Stavudine loaded gelatin liposomes for HIV therapy: preparation, characterization and in vitro cytotoxic evaluation”. Materials Science and Engineering C.

• Jyotsna Rani Padhi, Debasis Nayak, Pradipta Ranjan Rauta, Sarbani Ashe, Arpita Nanda, Bismita Nayak (2016), Development of highly biocompatible Gelatin & i-Carrageenan based composite hydrogels: In depth physiochemical analysis for biomedical applications, Carbohydrate polymers- Volume/Issue no 153C,292-301.

• Pankaj Chopra, Debasis Nayak, Sarbani Ashe, Pradipta Ranjan Rauta, Bismita Nayak (2016). Fabrication of PVA-Carrageenan scaffolds for cryopreservation: Effect of composition and duration of cryopreservation on cell viability. Carbohydrate polymers, 20;147:509-16.

• Manisha Kumari, Debasis Nayak, Sarbani Ashe, Neethi Chandra Thathapudi, Bismita Nayak (2016) Stability study of OMP encapsulated PLA-PLGA microparticles in simulated body fluid: A DLS perspective,, Micro & Nano Letters, Aug 11 (8): 446-449 10.1049/mnl.2016.0208.

• Debasis Nayak, Aliva Prity Minz, Sarbani Ashe, Pradipta Ranjan Rauta, Manisha Kumari, Pankaj chopra, Bismita Nayak (2016). ‘Synergistic combination of antioxidants, silver nanoparticles and chitosan in a nanoparticle based formulation: Characterization and cytotoxic effect on MCF-7 breast cancer cell lines’ Journal of Colloid and Interface Science, 470C, pp. 142-152.

• Pradipta Ranjan Rauta, Niladri Mohan Das, Debasis Nayak, Sarbani Ashe, Bismita Nayak (2016) ‘Enhanced efficacy of Clindamycin hydrochloride encapsulated in PLA/PLGA based nanoparticle system for oral delivery’ IET Nanobiotechnology, doi: 10.1049/iet-nbt.2015.0021.

• Prajna Mishra, Bismita Nayak, R.K. Dey, (2016), PEGylation in anti-cancer therapy: An overview, Asian Journal of Pharmaceutical Science, Volume 11, (3) June 2016, Pages 337–348.

Publications in Conferences• Pradhan N, Parbin S, Kar S, Sengupta D, Deb M, Das L and Patra SK (2017) Paederia foetida drastically reduces the migration

of PC-3 prostate cancer cells by altering the epithelial to mesenchymal transition (EMT) pathway diminishing ROS-induced epigenetic alterations. In Advances in Life Sciences, January 13-15, 2017, IISER Kolkata, Nadia, West Bengal. Book of Abstract, Poster No. 49.

• Parbin S, Pradhan N, Sengupta D, Deb M, Das L and Patra SK (2017) Lipid raft disruption induces IGFBP7 via RAS/MEK axis and histone methylation in HER-2 positive human breast cancer cell line. In Advances in Life Sciences, January 13-15, 2017, IISER Kolkata, Nadia, West Bengal. Book of Abstract, Poster No. 46.

• Dash Indira, Bhaskar Das, Harshita Bhawsar, Sahoo Moumita, P. Balasubramanian, R. Jayabalan. “Investigation on the production of bioethanol from black tea waste biomass in sea water based system. 1st Maejo-Engineo International Conference on Renewable Energy (MEICRE 2017) organized jointly by Maejo Univeresity and Engineo Co. Ltd., Chinag Mai, Thailand during 31 May – 2 June 2017.

• Analysis of the Fusarium virguliforme Transcriptomes Induced during Infection of Soybean Roots Suggests That Enzymes with Hydrolytic Activities Could Play a Key Role in Root Necrosis, at the Plant and Animal Genome XXV Conference, January 14-18, 2017 at the Town & Country Hotel & Confernce Center in San Diego, USA.

• Shradha Mawatwal, Saqib Kidwai, Arnab Kapuria, Amardeep Singh, Sakshi Agarwal, Ramandeep Singh, and Rohan Dhiman. 2016. Calcimycin inhibits intracellular mycobacterial growth by regulating autophagy. EMBO, Tuberculosis 2016 conference «Interdisciplinary research on tuberculosis and pathogenic mycobacteria”. p249, Sept. 19-23, 2016, Paris, France.


129

• N. Nayak, G. Dhar, S. Sahu, M. Mishra. A Drosophila approach for deciphering mechanism of diabetes. National Conference on “Genetics of Human Diseases” 3 - 4 November 2016.

• M Mishra. Oral intake of Nanoparticle toxicity assessment: A lesson learnt from fly. “Recent Trends of Chemical & Biological Sciences in Medicine, Natural Product and Drug Discovery (IC-RTCBSMNPDD)-2017” at P. G. Dept. of Chemistry, Berhampur University Odisha, India, during 03-05th March 2017.

• M. Mishra and S. Priyadarshini. Effects of dental bacterial strain Enterobacter ludwigii on Drosophila: A model organism to study host-microbes interaction. NDD 2017International Conference On Neurodegenerative Disorders: Current and Future PerspectiveFebruary 10 - 12, 2017 Venue: The Oberoi Grand, 15 Jawaharlal Nehru Road Kolkata, West Bengal 700013, INDIA.

• Monidipa Konar,. Basanti Ekka, Aniket Kumar , Priyabrat Dash, Monalisa Mishra, Harekrushna Sahoo. Assessment of three different nanoparticle-based dental fillers against novel chromogenic bacteria Enterobacter ludwigii. IUMRS-ICYRAM 2016 IISc BANGALORE Dec-11-15.

• Monalisa Mishra, Basanti Ekka, S Aurosman Pappus, Unnikannan P, Abhinandan Patnaik, Priyabrat Dash and Debabrat Sabat. Nanoparticle toxicity assessment: A lesson learnt from fly. 7th Euro-Global Summit on Toxicology & Applied Pharmacology J. Clin. Toxicol DOI: 10.4172/2161-0495.C1.022.

• Debabrat Sabat, Abhinandan Patnaik, Basanti Ekka, Priyabrat Dash, Monalisa Mishra. Effect of Titania Nanoparticle toxicity on Drosophila melanogaster mechanosensory behaviour. National Seminar on Science and Technology for National Development in India December 12-13, 2016.

Paper Accepted for Publication• Asthana, S., Bhutia, S.K., Sahoo, H. & Jha, S. (2017) Chaotropes trigger conformational rearrangements differently in

Concanavalin A. Journal of Chemical Sciences (accepted).

• Eldin Johnson, Yong-Gyun Jung, Ying-Yu Jin, Rasu Jayabalan, Joo Won Suh. (2017) “Bacteriocins as food preservatives: Challenges and Emerging Horizons”.Critical Reviews in Food Science and Nutrition. (accepted).

Books / Book Chapter• Pradhan N, Kar S, Parbin S, Sengupta D, Deb M, Das L and Patra SK (2017) Epigenetic dietary interventions for prevention

of cancer. Book Chapter, accepted (authored).

• Das, S. and H. R. Dash (2016). Handbook of Metal-Microbe interactions and Bioremediation. CRC Press, USA, ISBN 978-1-4987-6242-7, p. 803. (Edited).

• Rasu Jayabalan, Krishnawami Swaminathan. “Biochemical and therapeutic properties of kombucha tea”, LAP Lambert Academic Publishing, Germany, 2016, (ISBN: 978-3-659-95358-3).

• Jayanta Kumar Patra, Shakti Kanta Rath, Rasu Jayabalan. “Natural Products in Foods: Prospects and Applications”, (Edited book). Studium Press, Houston, USA, 2017, (ISBN-10: 1626990743.ISBN-13: 978-1626990746).

• Subbiah Jeeva, Eldin M Johnson, Sahoo Moumita, Dash Indira, Bhaskar Das, A.P. Sasikumar, R. Jayabalan. “Emerging concepts in biopreservation for food industries. Book chapter in Natural Products in Foods: Prospects and Applications (Edited). Studium Press, Houston, USA, 2017.

• Ramesh N. Pudake, Maya Kumari, Binod Bihari Sahu, and Eram Sultan. Targeted Gene Disruption Tools for Fungal Genomics. Springer (authored).

• Kalpana Dalei,Binod Bihari Sahu,Maya Kumari,Ravi Mani Tripathi, Ramesh N. Pudake. Advances in Genetic Transformation of Litchi. Springer (authored).

• Behera B, Sagiri SS, Patil V, Varghese V, Biswal B, Pal K, Roy S, Ray SS and Nayak B. Drug Delivery Methodologies for Recent advances of Biotechnology. Modern biology and its applications: Part 2, New India Publishing agency, PP, 611-647.

• Debasis Nayak, Bismita Nayak. “Nanomedicines: journey from ayurvedic bhasma to Nanoparticles” for Ethno-Pharmacology, iodiversity and Conservation. Kunal books publishers, New Delhi, Chapter 10, Page no- 154-204.

Patents• Suman Jha, Manoranjan Arakha, Parth Sarthi Nayak (2017) “Method for continuous production of silver nanoparticle using

Bacillus thuringiensis” (CBR No. 2977), Ref. N. 201631007436. TEMP/E-1/6629/2016-KOL. (Published).

• Bibekanand Mallick & Jyoti Roy (2017) Identification of dysregulated piwi-interacting (piRNAs) signatures in Alzheimer’s diseases. Application No. 201631042882A (Published).

• Bismita Nayak (2017) Biocompatible Gelatin and i-Carrageenan based composite hydrogels and biomedical applications thereof. TEMP/E-1/12919/2017-KOL (Filed).


130


By Faculty:• Prof. R Jayabalan selected as Member in AOAC SPSFAM (Stakeholder Panel on Strategic Food Analytical Methods) Kombucha

Expert Review Panel (August, 2016).

By Students:• Jyoti Roy selected as visiting doctoral student at DKFZ (German Cancer Research Center), Heidelberg, Germany.

Technical Association / Societies• Dr. V.D. Negi, Life member of Society of Biological Chemist (SBC), India. Membership number 3842.

• Dr. V.D. Negi, Life member of Indian Immunology Society (IIS). Membership number LM/IIS/12/16.




Co-PITotal Value


Identification,cloning, expression, purification and characterization of DNA demethylase enzyme activity: Investigation of the mechanism of demethylation of cytosine-5-carbon methylated-DNA keeping the DNA strand intact.

DBT PI: Dr S K Patra,Co-PI: Dr. S. Das

99.16 2017 sanctioned

-

Diversity and synthesis of immunoglobulin in the Indian Major Carps

ICAR, Govt. of India

Dr. Surajit Das(PI)

62.924 2013(ongoing)

2017

Green synthesis of iron nanoparticles from manglicolous fungi of Indian Sundarban and their application in sequestration of heavy metals from contaminated water

DBT, GoI Dr. Surajit Das(PI)

14.629 2016(ongoing)

2019

Taxonomy and diversity of culture-dependent and culture-independent heterotrophic bacteria of Bhitarkanika mangrove Ecosystem, Odisha, India

MoEFCC, GoI Dr. Surajit Das(PI)

27.576 2016(ongoing)

2019

Phototrophic biofilm based waste water recycling for sustainable water usage in rubber latex coagulation

DBT (Twinning) Dr. Surajit Das(PI)

28.76 2014(ongoing)

2018

Understanding biofilm modulation and catabolic gene expression by quorum sensing autoinducers in marine bacteria for degradation of polycyclic aromatic hydrocarbon

DBT, GoI Dr. Surajit Das (PI)

37.196 2017(ongoing)

2020

Characterization of marine bacterial biofilm for utilization in degradation of petroleum hydrocarbon

DST, Govt. of Odisha

Dr. Surajit Das(PI)

9.40 2017(ongoing)

2020


131


Name of the PI / Co-PI



Identification of piRNA associated genomic and epigenomic regulatory networks in ovarian cancer

DST, Govt. of India

Dr. B. Mallick(Mentor)

18.04 2014 2017

Nanoparticle: A boon or bane for human IAPP/ProIAPP monomer.

DST-INSPIRE Dr. Suman Jha(PI)

35 2013(ongoing)

2018

Nanoparticle based approach to enhance the AMP efficacy against AMP resistant bacteria

DBT (Twinning) Dr. Anupam Nath Jha (PI),

Dr. Suman Jha (PI)

38.50 2016(ongoing)

2019

Investigation on seaweed based synbioticformulation for combating malnutrition in Sundargarh District ofOdisha

DST(WSS-B)

Karthiga Parvathy(Mentor: Dr. R.

Jayabalan)

20.4 2017Sanctioned

Yet to start

Non-host resistance and programmed cell death in Arabidopsis for engineering broad spectrum and durable disease resistance in rice

DST Dr. Binod Bihari Sahu (PI)

26.2 2015 2018

Engineering Arabidopsis-specific nonhost resistance mechanism in rice for durable and broad-spectrum sheath blight resistance against Rhizoctonia solani

Govt. Odisha Dr. Binod Bihari Sahu (PI)

8.96 2016 2019

How do proteins bend membranes? Biophysical and Biochemical parameters that regulate membrane shaping by supramolecular assembly of clathrin and HIV1

DST-INSPIRE Dr. Mohammed Saleem

(PI)

35 2014 2019

Soybean lectins and their antimycobacterial role by regulating autophagy

DST Dr. R. Dhiman(PI)

25.66 2017 2020

Roles of micro RNAs in Drosophila ear formation and function

Govt. of Odisha Dr. M. Mishra(PI)

9.2 2017 2020

Salmonella infection and developmental defect in Caenorhabditis elegans

DST Dr. V.D. Negi(PI)

43.26 2017 020

Elucidate the epigenetic role of SOX9 in TKIs resistant non small cell lung cancer

DST Dr. B.K. Biswal(PI)

41.06 2017 2020

Excogitate neoteric biomarkers for lung cancer: A tissue oriented study of lung cancer patients in Odisha.

Govt. of Odisha Dr. B.K. Biswal (PI)

9.01 2017 2020

Exploiting the potential usage of Ferritin cage as Nanosink, Nanoreactor and Nanocarrier for Biomedical Applications.

DBT Dr Rabindra Kumar Behera (PI)

Dr Bijesh Kumar Biswal (Co-PI)

45 2017 2020


132

CONSULTANCY SERVICESSponsors Address Title of the Project Faculty NameNortem Biotechnology, Cadiz, Spain Large scale production of kombucha in bioreactors Prof. R. Jayabalan


CoordinatorTotal Value (Rs. in

Lakhs)Start Date Close Date


1. Laboratory of Epigenetics

2. Laboratory of Cancer and Cell Death

3. Laboratory of Environmental Microbiology and Ecology

4. Laboratory of RNAi and Functional Genomics

5. Laboratory of Protein Biology

6. Laboratory of Food Microbiology

7. Laboratory of Plant Immunity

8. Laboratory of Membrane Mechanics

9. Laboratory of Mycobacterial Immunology

10. Laboratory of Developmental Biology

11. Laboratory of Infection Immunology

Ph.D. DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis SupervisorArunima Shilpi Profiling of DNA methylation and single nucleotide polymorphism for diagnosis,

prognosis and targeting DNA methyltransferases for therapeutic intervention of breast cancer.

Prof. S.K. Patra

Dipta Sengupta Regulation of gene expression by microRNA vis-à-vis regulation of microRNA by DNA methylation in human cancer.

Prof. S.K. Patra

Swayamsiddha Kar Investigation of the Epigenetic Regulators and Signaling Pathways influencing Pluripotency Inducing Transcription Factor mediated Tumorigenesis.

Prof. S.K. Patra

Jaya Chakraborty Bioremediation of PCB and Cadmium Prof. S. DasManoranjan Arakha Impact of nanoparticles on biomolecular interfaces Prof. S. JhaDevyani Samantarrai Investigating the microRNA-mediated target regulations associated with

metastasis of cancer: special focus on soft tissue sarcoma and breast carcinomaProf. B. Mallick

P.K. Panda Autophagy Dependent Cell Death, Senescence and Differentiation by Abrus Agglutinin in Cancer Therapeutics

Prof. S.K. Bhutia

Niharika Sinha Mechanism of Tumor Inhibitory Potential of Abrus Agglutinin in Oral Squamous Cell Carcinoma

Prof. S.K. Bhutia


133

M.Sc./M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis SupervisorSankalita Paul Expression profiling of Sox2 in human lung cancer cell line and effect of HDAC

inhibitor.Prof. S.K. Patra

Rushati Dey Investigation of the expression profile of Oct4 in lung cancer and modulation by epigenetic modifier.

Prof. S.K. Patra

Sarbari Saha Investigating Autophagic status in Arabidopsis thaliana (Col-0) during osmotic stress

Prof. S.K. Bhutia

Suchitra Sahoo Comparative study of crude extract from different varieties of Abrus precatorius Seeds

Prof. S.K. Bhutia

Priyanka Mahuka Genetic basis of arsenic remediation and bacterial biofilm mediated biosoption of arsenic.

Prof. S. Das

Pratiti Rout Tumor suppressor role of a down-regulated piRNA in HT-1080 Fibrosarcoma Cells

Prof. B. Mallick

Arjun Arya Potential implication of piRNA in Neuroblastoma tumorigenesis Prof. B. MallickManish Sharma Elucidating the antimicrobial and cell internalization propensity of silver

nanoparticle synthesised using Pongamia pinnata.Prof. S. Jha

Kajal Krishana Molecular docking and antifibrillization activity of natural compounds against alpha synuclein fibrillization

Prof. S. Jha

Harshita Bhawsar Investigation On Ethanol Production In Sea Water Using Used Black Tea Waste Prof. R. JayabalanUzma Hasan Evaluation of the storage survivability of Lactobacillus paracasei KACC 12361

and Lactobacillus helveticus KACC 12418 in synbiotic microcapsulesProf. R. Jayabalan

Nikita YadavScreening Arabidopsis thaliana ecotypes for non-host resistance against Rhizoctonia solani that causes sheath blight in rice.

Prof. B.B. Sahu

Kuldeep Singh Lipid specificity of outer membrane vesicles (OMVs) interaction with biological membranes.

Prof. M. Saleem

Asmita Naik Biophysical Investigation of Graphene oxide-Lipid interaction Prof. M. SaleemTanmayee Nanda Microbial effect on gut in Drosophila melanogaster Prof. M. MishraRajkumar Dattatraya Kamble

Aggressive behaviour of Drosophila in the influence of Enterobacter bacteria Prof. M. Mishra

Krishna C G Effect of fixation and infection on Caenorhabditis elegans Prof. V.D. NegiAmaresh Mahakud Preparation, characterization and antimicrobial activity of Alstonia scholaris leaf

extract loaded PLGA nanoparticle.Prof. B.K. Biswal

Darshna Dubey Development of DNA vaccine to boost antigenic omp (Outer Membrane Protein) using nanoparticle based delivery

Prof. B. Nayak

Ashutosh Sahu Calcimycin affects mycobacterial growth by enhancing autophagy in atp-mediated p2rx7 dependent pathway

Prof. Rohan Dhiman


134

Department of MATHEMATICS


221 | P a g e





26

1311

0

5

10

15

20

25

30

M.Sc. (2 Years) Int. M.Sc. (5 Years) Ph.D.

44

90

0

10

20

30

40

50

60

70

80

90

100

M.Sc. ( 2 Years) Int.M.Sc (5 Years)


221 | P a g e





26

1311

0

5

10

15

20

25

30

M.Sc. (2 Years) Int. M.Sc. (5 Years) Ph.D.

44

90

0

10

20

30

40

50

60

70

80

90

100

M.Sc. ( 2 Years) Int.M.Sc (5 Years)


222 | P a g e

FACULTY

SL Name & Specialization1 Prof. Gopal Krishna Panda, ([email protected])

Professor, Ph.D. (Sambalpur University)Number Theory, Nonlinear Optimization

2 Prof. Snehashish Chakraverty, ([email protected])Professor & HOD, M.Sc. [(Applied Maths), Roorkee University)Mathematical Modelling, Soft Computing and Machine Intelligence, Vibration and Inverse Vibration Problems, Numerical Analysis

3 Prof. Kishor Chandra Pati, ([email protected])Professor Ph.D. (Delhi university)Lie Algebra, Kac Moody Algebra, Control Theory

4 Prof. Anil Kumar, ([email protected])Associate Professor, Ph.D. (IIT Guwahati)Mathematical Programming

5 Prof. Bata Krushna Ojha, ([email protected])Associate Professor, Ph.D. (Utkal University)Fluid Dynamics

6 Prof. Santanu Saha Ray, ([email protected])Associate Professor, Ph.D. (Jadavpur University)Differential Equations, Wavelet Transforms, Stochastic Differential Equations, Integral Equations, Numerical Analysis.

7 Prof. Bikash Sahoo, ([email protected])Assistant Professor, Ph.D. (IIT Roorkee) Computational Fluid Dynamics

8 S R Pattanaik: Convex Analysis, Maximal Monotone Operator, Douglas-Rachford Operator

9 Prof. Divya Singh, ([email protected])Assistant Professor, Ph.D. (Allahabad University)Wavelet Analysis

10 Prof. Jugal Mohapatra, ([email protected])Assistant Professor, Ph.D. (IIT Guwahati)Numerical Analysis

1 1

0

0.2

0.4

0.6

0.8

1

1.2

Aakash Institute Cerner


135


1 Prof. Gopal Krishna Panda, ([email protected])Professor, Ph.D. (Sambalpur University)Number Theory, Nonlinear Optimization

2 Prof. Snehashish Chakraverty, ([email protected])Professor & HOD, M.Sc. [(Applied Maths), Roorkee University)Mathematical Modelling, Soft Computing and Machine Intelligence, Vibration and Inverse Vibration Problems, Numerical Analysis

3 Prof. Kishor Chandra Pati, ([email protected])Professor Ph.D. (Delhi university)Lie Algebra, Kac Moody Algebra, Control Theory

4 Prof. Anil Kumar, ([email protected])Associate Professor, Ph.D. (IIT Guwahati)Mathematical Programming

5 Prof. Bata Krushna Ojha, ([email protected])Associate Professor, Ph.D. (Utkal University)Fluid Dynamics

6 Prof. Santanu Saha Ray, ([email protected])Associate Professor, Ph.D. (Jadavpur University)Differential Equations, Wavelet Transforms, Stochastic Differential Equations, Integral Equations, Numerical Analysis.

7 Prof. Bikash Sahoo, ([email protected])Assistant Professor, Ph.D. (IIT Roorkee) Computational Fluid Dynamics

8 S R Pattanaik: Convex Analysis, Maximal Monotone Operator, Douglas-Rachford Operator9 Prof. Divya Singh, ([email protected])

Assistant Professor, Ph.D. (Allahabad University)Wavelet Analysis

10 Prof. Jugal Mohapatra, ([email protected])Assistant Professor, Ph.D. (IIT Guwahati)Numerical Analysis

11 Prof. Manas Ranjan Tripathy, ([email protected])Assistant Professor, Posrdoc-ISI (Indian Statistical institute), Delhi, Ph.D(IIT Kharagpur)Statistical Inference, Estimation Theory, Computational Statistics, Estimation Using Censored Samples. Decision Theory

12 Prof. S Pradhan: Functional Analysis13 Prof. Debajyoti Choudhuri, ([email protected])

Assistant Professor, Ph.D.(University of Hyderabad)Elliptic PDEs

14 Prof. S. KayalStatistical Information Theory, Decision Theory, Order Statistics, Record Values

PUBLICATION

Publications in Journals• R.K. Davala and G.K. Panda, “On sum and ratio formulas of balancing-like sequences”’ Notes on Number Theory and Discrete

Mathematics, vol. 22, no. 3, 45-53, 2016.

• G.K. Panda and R.K. Davala, “Proof without words: Every cobalancer is a balancing number”, Mathematics Magazine, vol. 89, no. 3, 165-166, 2016.

• K. Liptai, G.K. Panda and S. Szalay, “A balancing problem on a binary recurrence and its associate”, Fibonacci Quarterly, vol. 54, no. 3, 235-240, 2016.

• Soumya Prakash Sahoo, Amit Jena., Soumya Ranjan Sahoo, K. C. Pati , Optimal control on Schrodinger Lie group and the behabiour of the dynamics, IMA Journal of Mathematical Control and Information (2016) 00, 1–17 doi: 10.1093/imamci/dnw045.

• Soumya Prakash Sahoo, Amit Jena., Soumya Ranjan Sahoo, K. C. Pati , Optimal Control, Stability And Numerical Integration on, Int. J. Appl. Comput.Math. DOI 10.1007/s40819-016-0181-8. (2016).


136

• On sum of monotone operator of type (FPV) and a maximal monotone operator, New Trend in Mathematical Science, Vol. 144, 188- 197 (2016).

• Manas Ranjan Tripathy “Improved estimation of common location of two exponential populations with order restricted scale parameters using censored samples”. Communications in Statistics-Simulation and Computation, http://dx.doi.org/10.1080/03610918.2017.1361974, 2017.

• Nadiminti Nagamani and Manas Ranjan Tripathy “ Estimating common scale parameter of two gamma populations: A simulation study”. American Journal of Mathematical and Management Science (Close to acceptance, 2017).

• Adarsha Kumar Jena and Manas Ranjan Tripathy “Estimating Quantiles of Two Exponential Populations with a Common Location Parameter Using Censored Samples”. Journal of Statistical Theory and Applications (To appear, 2017).

• Manas Ranjan Tripathy and Nadiminti Nagamani “Estimating common shape parameter of two gamma populations: A simulation study” Journal of Statistics and Management Systems (To appear, 1605012 (JSMS-T-308), 2017).

• Adarsha Kumar Jena and Manas Ranjan Tripathy “ Estimating Ordered Scale Parameters of Two Exponential Populations With a Common Location Under Type-II Censoring”. Chilean Journal of Statistics, Vol 8, No 1, pp 87-101, 2017.

• Manas Ranjan Tripathy, Somesh Kumar and Adarsha Kumar Jena “Estimation of quantiles of several normal populations with a common mean”. Communications in Statistics-Theory and Methods, Vol 46, No- 11, pp 5656-5671, 2017.

• Manas Ranjan Tripathy and Somesh Kumar “Some inadmissibility results for estimating quantile vector of several exponential populations with a common location parameter”. REVSTAT, Vol-15, No. 3, pp 395-423, 2017.

• Manas Ranjan Tripathy “ Equivariant estimation of common location parameter of two exponential populations using censored samples”. Hacettepe Journal of Mathematics and Statistics, Vol-45, No.4, pp 1307-1320, 2016.

• Ratan Kr. Giri, Debajyoti Choudhuri, “Composition Operators on Orlicz-Sobolev spaces”, accepted for publication in Journal of Advanced Studies in Mathematics in vol 10 (3),2017.

• Ratan Kr. Giri, Debajyoti Choudhuri, “A problem involving the p-Laplacian operator”, Differential Equations & Applications - Ele-M_th, Vol. 9 (2017), 171-181.

Publications in Conferences• Adarsha Kumar Jena and Manas Ranjan Tripathy (2016). Improved estimation of quantiles of two exponential populations with

a common location parameter using censored samples. International Workshop on Reliability Theory and Survival Analysis, November 3-5, 2016 organized by the department of Statistics and Center for Advanced Studies, Savitribai Phule Pune University, Pune-411007, India.

• Adarsha Kumar Jena and Manas Ranjan Tripathy (2016). Improved estimation of ordered quantiles of two exponential populations with a common location. Platinum Jubilee International Conference on “Applications of Statistics” Organized by Departmnt of Statistics, University of Calcutta, December 21-23, 2016.

Paper Accepted for Publication• R.K. Davala and G.K. Panda, “On sum and ratio formulas for Lucas-balancing numbers”, To appear in “Palestine J. of

Mathematics”.

• G.K. Panda, T. Komatsu and R.K. Davala, “Reciprocal sums of sequences involving balancing and Lucas-balancing numbers”, To appear in “Mathematical Reports”.

• G.K. Panda and A.K. Panda, “Circular balancing numbers”, To appear in “The Fibonacci Quarterly”.

• Nadiminti Nagamani and Manas Ranjan Tripathy “ Estimating common scale parameter of two gamma populations: A simulation study”. American Journal of Mathematical and Management Science (Close to acceptance, 2017).

• Adarsha Kumar Jena and Manas Ranjan Tripathy “Estimating Quantiles of Two Exponential Populations with a Common Location Parameter Using Censored Samples”. Journal of Statistical Theory and Applications (To appear, 2017).


Patent


By Faculty:

By Students:


137

Technical Association / Societies• Life Member of Odisha Mathematical Society

• Life Member of CSI


RESEARCH PROJECTSName of the Project Sponsoring Agency Name of the

PITotal Value


Affine Kac-Moody Symmetric spaces (tame Frećhet manifolds) and its analysis through Laplace like operator.

NBHM Prof. K.C. Pati

12, 87, 600 Apr 2017 Continuing

Sum of Maximal Monotone Operators in Banach Spaces

CSIR Dr. S. R. Pattanaik

12 Mar 2013 Continuing

Recovery of Inter-Block Information in Some Non-Normal Statistical Models

Department of Science & Technology

(DST), India

Prof. M R Tripathy

10,80,000/- 29-10-2013

28-10-2016



CoordinatorTotal Value (Rs. in




Akshya Kumar Panda Some variants of the balancing sequence G.K. Panda



138

Department of MECHANICAL ENGINEERING


227 | P a g e





9084

11 8

0

10

20

30

40

50

60

70

80

90

100

B.Tech. M.Tech.(2 Years) M.Tech.Dual (5 Years) Ph.D.

348

192

51

0

50

100

150

200

250

300

350

400



227 | P a g e





9084

11 8

0

10

20

30

40

50

60

70

80

90

100

B.Tech. M.Tech.(2 Years) M.Tech.Dual (5 Years) Ph.D.

348

192

51

0

50

100

150

200

250

300

350

400



228 | P a g e

FacultySL Name & Specialization1 Prof. Samir Kumar Acharya ([email protected])

Professor , Ph.D. (Sambalpur University)Composite Materials

2 Prof. Rabindra Kumar Behera ([email protected])Associate Professor , Ph.D. (NIT Rourkela)Machine Design and Vibration

3 Prof. Suraj Kumar Behera ([email protected])Assistant Professor , M.Tech. (IIT Kanpur)Solid mechanics, machine design

4 Prof. Chandan Kumar Biswas ([email protected])Associate Professor , Ph.D. (IIT Kharagpur)Non Conventional Machining, Micro Manufacturing

5 Prof.(Ms.) Sandhyarani Biswas ([email protected])Assistant Professor , Ph.D. (NIT Rourkela)Composite Materials, Production Engineering

6 Prof. Saurav Datta ([email protected])Assistant Professor , PhD (Jadavpur University)Welding Technology, Quality Optimization, Modelling and Simulation of Production Processes

7 Prof. Soumya Gangopadhyay ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Surface Engineering, Coating Technology

8 Prof. Suman Ghosh ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Multi phase fluid flow, Heat transfer, Heat Exchanger

9 Prof. A. Kumar Assistant Professor , Ph.D. (IIT Kharagpur)Heat transfer, Heat Exchanger

10 Prof. Kalipada Maity ([email protected])Professor , Ph.D. (Sambalpur University)Micro-Machining, Metal Forming, Cryo-treatment, hot-machining, modeling of metal

1 1

4

2 2

16

2 23

1 12 2

43

1 12 2

4 4

1 1 1 1 12

6

2

12

1 1

5

1

0

2

4

6

8

10

12

14

16

18

3SC Solutions Bridge and Roof Hindustan Coca-Cola Beverages

Mahindra &Mahindra

SandipUniversity

TredenceAnalytics


139

FacultySL Name & Specialization

1 Prof. Samir Kumar Acharya ([email protected])Professor , Ph.D. (Sambalpur University)Composite Materials

2 Prof. Rabindra Kumar Behera ([email protected])Associate Professor , Ph.D. (NIT Rourkela)Machine Design and Vibration

3 Prof. Suraj Kumar Behera ([email protected])Assistant Professor , M.Tech. (IIT Kanpur)Solid mechanics, machine design

4 Prof. Chandan Kumar Biswas ([email protected])Associate Professor , Ph.D. (IIT Kharagpur)Non Conventional Machining, Micro Manufacturing

5 Prof.(Ms.) Sandhyarani Biswas ([email protected])Assistant Professor , Ph.D. (NIT Rourkela)Composite Materials, Production Engineering

6 Prof. Saurav Datta ([email protected])Assistant Professor , PhD (Jadavpur University)Welding Technology, Quality Optimization, Modelling and Simulation of Production Processes

7 Prof. Soumya Gangopadhyay ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Surface Engineering, Coating Technology

8 Prof. Suman Ghosh ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Multi phase fluid flow, Heat transfer, Heat Exchanger

9 Prof. A. Kumar Assistant Professor , Ph.D. (IIT Kharagpur)Heat transfer, Heat Exchanger

10 Prof. Kalipada Maity ([email protected])Professor , Ph.D. (Sambalpur University)Micro-Machining, Metal Forming, Cryo-treatment, hot-machining, modeling of metal working and machining, Plastic Deformation

11 Prof. Manoj Masanta ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Laser application in manufacturing, Coating Technology

12 Prof. Siba Sankar Mohapatra ([email protected])Professor & Head , Ph.D. (IIT Kharagpur)Operations Management

13 Prof. Sukesh Chandra Mohanty ([email protected])Associate Professor , Ph.D. (NIT Rourkela)Machine Design, Structural dynamics , Vibration, Gear dynamics

14 Dr. Manoj Kumar Moharana ([email protected])Assistant Professor , Ph.D. (IIT Kanpur)Fluid flow, Heat transfer

15 Prof. S. Murugan ([email protected])Associate Professor, Ph.D. (Anna Univ.) IC Engine and Energy Engineering

16 Prof. Bijoy Kumar Nanda ([email protected])Professor , Ph.D. (Sambalpur University)Machine Tool Design, Production Engineering, Damping of Structures

17 Prof. Dayal Ramakrushna Parhi ([email protected])Professor , Ph.D. (Cardiff Univ. UK)Robotics, Machatronics, Machine Design and Vibration

18 Prof. Subrata Kumar Panda ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Vibration and Control, Nonlinear FEM, Functionally Graded Material, CNT, Bio-Mechanics


140


19 Prof. Saroj Kumar Patel ([email protected])Associate Professor , Ph.D. (IIT Kharagpur)Quality assurance, Optimization, Bioenergy

20 Prof. Haraprasad Roy ([email protected])Assistant Professor , Ph.D. (IIT Kharagpur)Rator Dynamics

21 Prof. Tarapada Roy ([email protected])Assistant Professor , Ph.D. (IIT Guwahati)Vibration and Control

22 Prof. Ranjit Kumar Sahoo ([email protected])Professor , Ph.D. (IIT Kharagpur)Heat Transfer, Cryogenic Engineering

23 Prof. Susanta Kumar Sahoo ([email protected])Professor , Ph.D. (Utkal University)Metal Forming, Ultrasonic Welding, Laser Material Processing

24 Prof. Alok Satapathy ([email protected])Associate Professor , Ph.D. (Sambalpur University)Thermal Science, Surface Engineering and Materials

25 Prof. Ashok Kumar Satapathy ([email protected])Associate Professor , Ph.D. (Sambalpur University)Thermal Engineering, Two Phase Flow

26 Prof. Jonnalagadda Srinivas ([email protected])Associate Professor , Ph.D. (Andhra University)Machine Vibration, Rotor Dynamics and MEMS

27 Prof. S. Anbarasu([email protected])Assistant Professor , Ph.D. (IIT Madras)Thermal Engineering, Cryogenic Engineering,

Publication in Journals (SCI and Scopus indexed): • Swain, A., Roy, T., Nanda, B.K., “A Comparative Study on Passive Vibration Damping in Thin Carbon Nanotube Based Hybrid

Composite Spherical Shell Panel”, Procedia Engineering, 2016, Vol (144), pp. 705-712.

• Swain, Ashirwad, Roy, Tarapada, and Nanda, Bijoy Kumar, “Vibration Damping Characteristics of Carbon Nanotubes Based Thin Hybrid Composite Shell Structures”, Journal of Mechanics of Advanced Materials and Structures. Volume 24, Issue 2, (2017), pp 95-113, DOI:10.1080/15376494.2015.1107669.

• Hirwani, C. K, Panda, S. K., Mahapatra, T. R., Sahoo, S. S., , Singh, V. K. and Patle, B. K. (2017), Nonlinear Free Vibration Analysis of Laminated Carbon/Epoxy Curved Panels: Theoretical and Experimental Investigation Defense Science Journal, 67(2), 207-218 (IF: 0.428) SCIE and SCOPUS.

• Mehar, K., Panda, S. K. and Patle B. K. (2017), Thermoelastic vibration and flexural behavior of FG-CNT reinforced composite curved panel, International Journal of Applied Mechanics, (In press) Vol. 9, No. 4 DOI: 10.1142/S1758825117500466 (IF:1.468) SCI,SCIE and SCOPUS.

• Sahoo, S. S., Panda, S. K. and Mahapatra, T. R. (2016), Static, Free Vibration and Transient Response of Laminated Composite Curved Shallow Panel-An Experimental Approach, European Journal of Mechanics-A/Solids 59, 95-113 (IF: 1.678) D. O. I. 10.1016/j.euromechsol.2016.03.014 SCI and SCIE .

• Mehar, K. and Panda, S. K. (2016), Geometrical Nonlinear Free Vibration Analysis of FG-CNT Reinforced Composite Flat Panel under Uniform Thermal Field, Composite Structures, 143, 336-346. (IF: 3.120) SCI

• Sahoo, S. S., Panda, S. K. and Sen, D. (2016), Effect of delamination on Vibration, Bending and Transient Behaviour of Laminated Composite Plate, AIAA Journal 54 (8) 2530-2544 (IF: 1.207). SCI

• Kona Nagendrababu, Gangadhar Talla, Soumya Gangopadhyay, Experimental investigation and optimization during the fabrication of arrayed structures using reverse EDM, Materials and Manufacturing Processes, Vol. 32, pp.958-969 2017.

• Talla, G., Gangopadhyay, S., Biswas, C.K., Influence of graphite powder mixed EDM on the surface integrity characteristics of Inconel 625, Particulate Science and Technology, 35 219-226, 2017.

• Thakur. A., Gangopadhyay, S., Maity, K.P., Sahoo, S.K., Evaluation on Effectiveness of CVD and PVD Coated Tools during Dry Machining of Incoloy 825, Tribology Transaction, 59, pp. 1048-1058, 2016.


141

• Modelling, simulation and experimental investigation for generating ‘I’ shaped contour on Inconel 825 using electro chemical machining, A.A. Nayak, S. Gangopadhyay, D.K. Sahoo, Accepted, Journal of Manufacturing Processes, 23 pp. 269-277, 2016.

• Thakur, A., Gangopadhyay, S., Maity, K.P., Mohanty, A., Experimental assessment on performance of TiN/TiCN/Al2O3/ZrCN coated tool during dry machining of Nimonic C-263, International Journal of Machining and Machinability of Materials, Vol. 18, pp. 452-465 2016.

• Pranav Bhale, Hrishikesh Shastri, Ashok Mondal, Manoj Masanta, Subodh Kumar, Effect of Deep Cryogenic Treatment on Microstructure and Properties of AE42 Mg Alloy, Journal of Materials Engineering and Performance 25 (2016) 3590–3598. DOI: 10.1007/s11665-016-2238-6 [Springer, Journal impact factor -1.331]

• Chinmaya K Sahoo, Lalit Soni, Manoj Masanta, Evaluation of microstructure and mechanical properties of TiC/TiCsteel composite coating produced by gas tungsten arc (GTA) coating process, Surface & Coatings Technology 307 (2016) 17–27. DOI: 10.1016/j.surfcoat.2016.08.056 [Elsevier, Journal impact factor - 2.589]

• Chinmaya K Sahoo, Manoj Masanta, Microstructure and Mechanical Properties of TiC-Ni Coating on AISI304 Steel Produced by TIG Cladding Process, Journal of Materials Processing Technology 240 (2017) 126–137 DOI: 10.1016/j.jmatprotec.2016.09.018 [Elsevier, Journal impact factor - 3.147]

• K. Kumar, P Ahirwar, M Masanta, Effect of Varying Root Gap on Butt Welding of 6 mm Thick AISI 1020 Plate by Autogenous TIG Welding Process, Materials Science Forum 880, 21-24 DOI: 10.4028/www.scientific.net/MSF.880.21 [Trans-tech publication IF: 0.29]

• Chinmaya K Sahoo, Manoj Masanta, Microstructure and Tribological Behaviour of TiC-Ni-CaF2 Composite Coating Produced by TIG Cladding Process, Journal of Materials Processing Technology 243 (2017) 229–245 DOI: 10.1016/j.jmatprotec.2016.12.028 [Elsevier, Journal impact factor - 3.147]

• Sweta Saroj, Chinmaya Kumar Sahoo, Manoj Masanta, Microstructure and mechanical performance of TiC-Inconel825 composite coating deposited on AISI 304 steel by TIG cladding process, Journal of Materials Processing Technology, 249 (2017) 490–501 Doi:10.1016/j.jmatprotec.2017.06.042 [Elsevier, Journal impact factor - 3.147]

• MP Sathapathy, SK Sahoo, S Datta, 2016, Acoustic Horn Design and Effects of Process Parameters on Properties of Dissimilar Ultrasonic Welding Aluminium to Brass, Materials and Manufacturing Processes, Volume 31, No. 3, pp. 283-290.

• Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, 2016, Multi-objective Optimization in Drilling of CFRP (Polyester) Composites: Application of a Fuzzy Embedded Harmony Search (HS) Algorithm, Measurement, Volume 77, pp. 222-239.

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2016, A TODIM-Based Decision Support Framework for G-Resilient Supplier Selection in Fuzzy Environment, Asia-Pacific Journal of Operational Research, 33(2): 1650033-1–1650033-40.

• Kumar Abhishek, V. Rakesh Kumar, Saurav Datta, Siba Sankar Mahapatra, 2017, Application of JAYA Algorithm for Optimization of Machining Performance Characteristics during Turning of CFRP (Epoxy) Composites: Comparison with TLBO, GA and ICA, Engineering with Computers, 33: 457-475.

• Chandramani Upadhyay, Saurav Datta, Manoj Masanta, Siba Sankar Mahapatra, 2017, An Experimental Investigation Emphasizing Surface Characteristics of Electro-Discharge Machined Inconel 601, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39(8): 3051-3066. DOI: 10.1007/s40430-016-0643-2

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2017, Decision Support Framework for Selection of 3PL Service Providers: Dominance Based Approach in Combination with Grey Set Theory, International Journal of Information Technology and Decision Making, 16(1): 25-57. DOI: 10.1142/S0219622016500474.

• Rahul, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, 2017, A Novel Satisfaction Function and Distance Based Approach for Machining Performance Optimization during Electro-Discharge Machining on Super Alloy Inconel 718, The Arabian Journal for Science and Engineering, 42: 1999-2020.

• Rahul, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, 2017, Electrical Discharge Machining of Inconel 825 using Cryogenically Treated Copper Electrode: Emphasis on Surface Integrity and Metallurgical Characteristics, Journal of Manufacturing Processes, 26: 188-202.

• Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra, Bikash Ranjan Debata, 2016, Interpretive Structural Modelling of Critical Risk Factors in Software Engineering Project, Benchmarking: an International Journal, Volume 23, No. 1, pp. 2-24.

• Chhabi Ram Matawale, Saurav Datta, Siba Sankar Mahapatra, 2016, Supplier /Partner Selection in Agile Supply Chain: Application of Vague Set as a Decision Making Tool, Benchmarking: an International Journal, 23(4): 866-892.

• Anoop Kumar Sahu, Saurav Datta, Siba Sankar Mahapatra, 2016, Evaluation and Selection of Resilient Suppliers in Fuzzy Environment: Exploration of Fuzzy-VIKOR, Benchmarking: an International Journal, 23(3), pp. 651-673.

• Anoop Kumar Sahu, Saurav Datta, Siba Sankar Mahapatra, 2016, Evaluation and Selection of Suppliers Considering Green Perspectives: Comparative Analysis on Application of FMLMCDM and Fuzzy-TOPSIS, Benchmarking: an International Journal, 23(6): 1579-1604.


142

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2016, Extension of PROMETHEE for Robot Selection Decision Making: Simultaneous Exploration of Objective Data and Subjective (Fuzzy) Data, Benchmarking: an International Journal, Volume 23, Number 4, pp. 1-35.

• Chhabi Ram Matawale, Saurav Datta, Siba Sankar Mahapatra, 2016, Supplier Selection in Agile Supply Chain: Application Potential of FMLMCDM Approach in Comparison with Fuzzy-TOPSIS and Fuzzy-MOORA, Benchmarking: an International Journal, 23(7): 2027-2060.

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2016, Application of TODIM (Tomada de Decisión Inerativa Multicritero) for Industrial Robot Selection, Benchmarking: An International Journal, 23(7): 1818-1833.

• Chhabi Ram Matawale, Saurav Datta, Siba Sankar Mahapatra, 2016, A Fuzzy Embedded Leagility Assessment Module in Supply Chain, 23(7): 1937-1982, Benchmarking: an International Journal.

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2017, Extension of TODIM for Decision Making in Fuzzy Environment: A Case Empirical Research on Selection of Industrial Robot, International Journal of Services and Operations Management, 26(2): 238-276.

• Anoop Kumar Sahu, Saurav Datta, Siba Sankar Mahapatra, 2017, Evaluation of Performance Index in Resilient Supply Chain: A Fuzzy Based Approach, Benchmarking: an International Journal, 24(1): 118-142.

• Chhabi Ram Matawale, Saurav Datta, Siba Sankar Mahapatra, 2017, Performance Appraisement and Benchmarking of Leagility Inspired Industries: A Fuzzy Based Decision Making Approach, International Journal of Services and Operations Management, 26(4): 498-526.

• Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, 2017, Multi-Objective Optimization during Drilling of CFRP Composites: A PCA-Fuzzy Taguchi Integrated Approach, International Journal of Industrial and Systems Engineering, 26(2): 182-200.

• Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, 2007, Optimization of MRR, Surface Roughness, and Maximum Tool-Tip Temperature during Machining of CFRP Composites, Materials Today: Proceedings, 4: 2761–2770.

• Kumar Abhishek, Suman Chatterjee, Saurav Datta, Siba Sankar Mahapatra (2017) Integrating Principal Component Analysis, Fuzzy Linguistic Reasoning and Taguchi Philosophy for Quality-Productivity Optimization, Materials Today: Proceedings, 4: 1772–1777.

• Rahul, Kumar Abhishek, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, 2017, Machining Performance Optimization during EDM of Inconel 718: A Case Experimental Investigation, International Journal of Productivity and Quality Management, 21(4): 460-489.

• H. Roy, S. Chandraker, 2017, ‘Dynamic Study of Viscoelastic Rotor: Modal Analysis of Higher Order Model Considering Various Asymmetries’, Mechanism and machine theory, vol. 109, pp. 65-77.

• S. Kumar, A. Mitra and H. Roy, 2017, “Forced vibration response of axially functionally graded non-uniform plates considering geometric nonlinearity,” International Journal of Mechanical Sciences, vol. 128-129, pp. 194-205.

• H. Roy, S. Chandraker, J. K. Dutt, and T. Roy, “Dynamics of Multilayer, Multidisc Viscoelastic Rotor – An Operator Based Higher Order Classical Model”, Journal of Sound and Vibration, vol. 369, (2016), pp. 87-108.

• S. Chandraker, H. Roy, “Dynamic Study of Viscoelastic Rotor: Reduction of Higher Order Model Using Different Techniques”, Aerospace Science and Technology, vol. 58, (2016), pp. 306-317.

• M.P. Satapathy and S.K.Sahoo. An Experimental Investigation on Joining of Aluminum with Steel Using Ultrasonic Metal Welding, International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol 9, no. 4, pp. 299-309, 2016. http://www. inderscience.com/ info/ingeneral/ forthcoming.php?jcode=ijmms.

• M.P. Satapathy and S.K.Sahoo. Microstructural and mechanical performance of ultrasonic spot welded Al-Cu joints for various surface conditions, Journal of Manufacturing Processes, Vol 22, pp. 108-114, 2016.

• T.R.Mohanty, S.K.Sahoo, M.K.Moharana, Study on blast furnace cooling stave for various refractory linings based on numerical modeling. IOP Conf. Series: Materials Science and Engineering, vol. 115, no. 1, 2016, pp 43-50.

• M.P. Satapathy, S.K.Sahoo, Ultrasonic spot welding of dissimilar metals: Characterization and optimization of parameters. IOP Conf. Series: Materials Science and Engineering, vol. 115, no. 1, 2016, pp 11-18.

• S. K. Sahu, B.R. Moharana,V.B. Shaibu, S.K.Sahoo, An experimental study on CO2 laser beam welding of 304SS and Cu dissimilar pipes, International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol 9, no. 4, pp. 310-326, 2016.

• Kasinath Das Mohapatra and Susanta Kumar Sahoo, Experimental analysis and optimization of process parameters for gear cutting process using Wire EDM, International Journal of Mechatronics and Manufacturing Systems (IJMMS), Vol 9, no. 4, pp. 327-344, 2016.


143

• Kasinath Das Mohapatra, Susanta Kumar Sahoo and Munmun Bhoumik, Thermal Modeling and Structural Analysis in wire EDM Process for a 3D, International Journal of Applied Mechanics and Materials, 2016, Vol 852, pp.279-289. doi:10.4028/www.scientific.net /AMM.852.279.

• Kasinath Das Mohapatra, Mantra Satpathy and Susanta Kumar Sahoo, Comparison of Optimization Techniques on MRR and Surface Finish in Wire EDM Process for Gear, International Journal of Industrial Engineering Application, 2017, Vol 8,pp.251-262. doi: 10.5267/j.ijiec.2016.9.002

• M.P. Satapathy and S.K.Sahoo. Mechanical performance and metallurgical characterization of ultrasonically welded dissimilar joints, Journal of Manufacturing Processes, Vol 25, pp. 443-451, 2017.

• Samal, A.P., Patel, S.K. and Kumar, M., 2016, Characterization of Properties and Estimation of Power Generation Potentials of Some Woody Biomass Residues, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, Taylor and Francis Publication,Vol.38,No.12,pp.1819.1824.http://www.tandfonline.com/doi/full/10.1080/15567036.2014.1002951.

• Das, A., Mukhopadhyay, A., Patel, S.K., Biswal, B.B., 2016, Comparative Assessment on Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts During Hard Turning, Arabian Journal of Science and Engineering, Vol. 41, pp. 4531-4552, Impact factor = 0.865, DOI 10.1007/s13369-016-2160-0.

• Tudu, K., Murugan, S. and Patel S.K., 2016, Effect of tyre derived oil-diesel blend on the combustion and emissions characteristics in a compression ignition engine with internal jet piston geometry, Fuel, Elsevier Publication, Impact factor = 3.52 [Accepted, In press].

• Tudu, K., S. Murugan and S.K. Patel. 2016, “Effect of Diethyl Ether in a DI Diesel Engine Run on a Tyre Derived Fuel-Diesel Blend. Journal of Energy Institute, Elsevier, doi. 10.1016/j.joei.2015.004., impact factor 3.24.

• Tudu, K., S. Murugan and S.K. Patel., 2016, Experimental analysis of a DI diesel engine fuelled with light fraction of pyrolysis oil. International Journal of Oil, Gas and Coal Technology, Vol. 11, No. 3, impact factor: 0.464.

• Kumar, C.S. and Patel, S.K., 2017, Experimental and numerical investigations on the effect of varying AlTiN coating thickness on hard machining performance of Al2O3-TiCN mixed ceramic inserts, Surface and Coatings Technology, Volume 309, pp. 266–281, Impactfactor=2.589.http://dx.doi.org/10.1016/j.surfcoat.2016.11.080

• Tudu, K., S. Murugan and S.K. Patel, 2017, Experimental study of diethyl ether addition on the performance and emissions of a diesel engine. International Journal of Ambient Energy, Taylor & Francis, Vol. 38, No. 4, pp. 332–338, org/10.1080/01430750.2015.1100679.

Publications in Conferences• Yuvaraju, B. A. G., and Nanda, B. K., “Prediction of vibration amplitude and surface roughness in boring operation using

response surface methodology”, International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME) 17, NIT Tiruchirappalli, 10-12, March 2017.

• Kulkarni, Prathamesh, Bhattacharjee, Antara, Nanda, B. K., “Study of damping in composite beams”, International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME) 17, NIT Tiruchirappalli, 10-12, March 2017.

• Katariya Pankaj, Panda S. K. and Mahapatra T. R., (2017), Effect of skew angle on free vibration responses of sandwich composite plate, AETM 2017, Bangkok, Thailand, 6th January 2017.

• Panda, S. K., Mahapatra, T. R. and Kar, V. R., (2017), Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties International Conference on Advanced Technologies in Manufacturing and Materials Engineering 2017, January 5th-7th, Thailand.

• Hirwani, C. K., Mittal, H., Panda, S. K., Mahapatra, S. S., Mandal, S. K., De, A., (2016) Simulation Study of Stress and Deformation Behaviour of Debonded Laminated Structure-An Experimental Validation, NCPCM 2016, National Institute of Technology Rourkela, December 9-10 (2017 IOP Conf. Ser.: Mater. Sci. Eng. 178 012005).

• Mahapatra, T. R., Mehar, K. and Panda, S. K., Dewangan, S., and Dash, S., (2016) Flexural Strength of Functionally Graded Nanotube Reinforced Sandwich Spherical Panel, NCPCM 2016, National Institute of Technology Rourkela, December 9-10, (2017 IOP Conf. Ser.: Mater. Sci. Eng. 178 012031).

• Suman S. D., Hirwani, C. K., Chaturbedy, A., and Panda, S. K., (2016) Effect of magnetostrictive material layer on the stress and deformation behavior of laminated composite structure, NCPCM 2016, National Institute of Technology Rourkela, December 9-10 (IOP Conf. Ser.: Mater. Sci. Eng. 178 012031).

• Azim, S., Gangopadhyay, S., Thakur, A., Study of surface integrity after drilling Inconel 825 using uncoated and PVD coated tool, AIMTDR-2016, December 16-18, 2016, COEP, Pune.

• Ravi Kumar, M, Jacob, A, Gangopadhyay, S.,, Micro-Blasting as an Effective Pretreatment for Physical Vapor Deposition (PVD) Coating, Accepted for oral presentation IMME2017, NIT Trichy, 10-12 March, 2017.


144

• Tijo D, Manoj Masanta, TiB2-TiC coating on Ti-6Al-4V alloy using Ti and B4C powder suspended dielectric by Electro Discharge Coating (EDC) process, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016 at College of Engineering., Pune, Maharashtra, INDIA.

• Rahul, Chandramani Upadhyay, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Machining Performance Optimization for Electro Discharge Machining of Inconel 625: A Case Experimental Study, 4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala Lumpur, Malaysia during July 14-16, 2016.

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, G-Resilient Supplier Selection in Fuzzy Environment: Application Potential of Satisfaction Function and Distance Based Approach, 4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala Lumpur, Malaysia during July 14-16, 2016.

• Venkat Reddy Mali, Rahul, Suman Chatterjee, Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, Bibhuti Bhusan Biswal, Experimental Investigations on CNC Drilling of CFRP (Epoxy) Composites: Machining Performance Optimization, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Chandramani Upadhyay, Saurav Datta, Manoj Masanta, Siba Sankar Mahapatra, Influence of Process Parameters on Surface Characteristics of EDMed Inconel 601: An Experimental Investigation, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, A Conceptual Framework for Performance Evaluation of Industrial Supply Chain: Consideration of Traditional and Green Criteria, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Santosh Kumar Sahu, Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, Fuzzy Based Decision Support System for Supply Chain Performance Assessment: An Empirical Research using Fuzzy Numbers Set Theory, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Ankur Srivastava, Rahul, Kumar Abhishek, Ranjeet Kumar Sahu, Saurav Datta, Siba Sankar Mahapatra, Machinability Analysis of Aluminum Alloy 6061 in Electro-Discharge Machining: Effect of Tool Material, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, Fuzzy-TODIM for Industrial Robot Selection, 1st International Conference on Emerging Trends in Mechanical Engineering (ICETiME 2016), 23-24 September 2016, Faculty of Science and Technology, The ICFAI Foundation of Higher Education (IFHE), Hyderabad.

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, On Understanding of Supply Chain Risks: Application of Fuzzy Set Theory (FST) and Interpretive Structural Modeling (ISM), International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, November 12-13, 2016, Organized by Department Of Production Engineering, Birla Institute of Technology Mesra, Ranchi & The Institution of Engineers (India), Jharkhand State Centre (Under the Aegis of Production Engineering Division Board, IEI).

• Rahul, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Analysis of Surface Characteristics of Electro-Discharge Machined of Super Alloy Inconel 601: A Multi-Response Optimization Route Combining TOPSIS and Taguchi Method, International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, November 12-13, 2016, Organized by Department Of Production Engineering, Birla Institute of Technology Mesra, Ranchi & The Institution of Engineers (India), Jharkhand State Centre (Under the Aegis of Production Engineering Division Board, IEI).

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, Understanding of E-commerce Risks in Fuzzy Environment: A Decision Support Framework, 4th International Conference on Production and Industrial Engineering (CPIE 2016), December 19-21, 2016 at Dr. B.R. Ambedkar National Institute of Technology, Jalandhar (Punjab).

• Rahul, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Optimization of Surface Roughness, Surface Crack Density and White Layer Thickness of Electro-Discharge Machined Super Alloy Inconel 718: Application of TOPSIS Integrated with Taguchi Method, 4th International Conference on Production and Industrial Engineering (CPIE 2016), December 19-21, 2016 at Dr. B.R. Ambedkar National Institute of Technology, Jalandhar (Punjab).

• Thrinadh Jadam, Chandramani Upadhyay, Saurav Datta, Soumya Gangopadhyay, Siba Sankar Mahapatra, Analysis on Topography and Metallurgical Aspects of EDMed Work Surface of Inconel 718 Obtained Using Triangular Cross Sectioned Copper Tool Electrode, IEEE International Conference on Management Systems (AMIAMS-2017) during 3-5 February, 2017, organized by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, UP- 211004.

• Kumar Abhishek, Saurav Datta, Manoj Masanta and Siba Sankar Mahapatra, Fuzzy Embedded Imperialist Competitive Algorithm (ICA) for Multi-Response Optimization during Machining of CFRP (Epoxy) Composites, IEEE International Conference on


145

Management Systems (AMIAMS-2017) during 3-5 February, 2017, organized by Department of Mechanical Engineering, Motilal Nehru National Institute of Technology, Allahabad, UP- 211004.

• Rahul, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Optimization of EDM Responses on Super Alloy Inconel 718: Use of Satisfaction Function Approach Combined with Taguchi Philosophy, 7th International Conference on Materials Processing and Characterization, 17-19 March 2017, GRIET, Hyderabad. (ID No 901).

• Rahul, Ankur Srivastava, Dileep Kumar Mishra, Suman Chatterjee, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Multi-Response Optimization during Electro-Discharge Machining of Super Alloy Inconel 718: Application of PCA-TOPSIS, 7th International Conference on Materials Processing and Characterization, 17-19 March 2017, GRIET Hyderabad. (ID No 703).

• Thrinadh Jadam, Saurav Datta, Siba Sankar Mahapatra, Electro-Discharge Machining of Inconel 718 Using Square Cross Sectioned Copper Tool Electrode: Studies on Topography and Metallurgical Features of the EDMed Work Surface, 7th International Conference on Materials Processing and Characterization, 17-19 March 2017, GRIET, Hyderabad. (ID No 1110).

• Bighnesh Kumar Sahu, Saurav Datta, Siba Sankar Mahapatra, On Electro-Discharge Machining of Inconel 718 Super Alloy: An Experimental Investigation, 7th International Conference on Materials Processing and Characterization, 17-19 March 2017, GRIET, Hyderabad. (ID No 1113).

• Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, Application of Nonlinear Regression, Fuzzy Logic and Imperialist Competitive Algorithm for Optimization of Process Responses during Machining of CFRP Composites, National Level Symposium on Materials Characterization and Manufacturing (MCM-2016), organized by Department of Mechanical Engineering, P. C. College of Engineering, Verna, Goa 403722, in collaboration with Department of Physics, Goa University, Taleigao Plateau, Goa 403206, held during 18th & 19th August 2016 at Goa University.

• Ankur Srivastava, Kumar Abhishek, Saurav Datta, Chandramani Upadhyay, Siba Sankar Mahapatra, Effect of variation of electrode material on machining performance of Al 6061 during EDM operation, National Level Symposium on Materials Characterization and Manufacturing (MCM-2016), organized by Department of Mechanical Engineering, P. C. College of Engineering, Verna, Goa 403722, in collaboration with Department of Physics, Goa University, Taleigao Plateau, Goa 403206, held during 18th & 19th August 2016 at Goa University.

• Chandramani Upadhyay, Saurav Datta, Siba Sankar Mahapatra, An Experimental Investigation on Electro-Discharge Machining (EDM) of Inconel Super Alloy 601, National Level Symposium on Materials Characterization and Manufacturing (MCM-2016), organized by Department of Mechanical Engineering, P. C. College of Engineering, Verna, Goa 403722, in collaboration with Department of Physics, Goa University, Taleigao Plateau, Goa 403206, held during 18th & 19th August 2016 at Goa University.

• K. Ganguly, P. Nahak, H. Roy, 2017, “Dynamics of cracked viscoelastic beam-An operator based finite element approach” Proceedings of the ASME INTERNATIONAL GAS TURBINE INDIA CONFERENCE, Paper id- GTIndia-4616.

• S. Chandraker, J. K. Dutt, H. Roy, 2017, “Parametric study of stability criteria for rotor bearing model with viscoelastic support” Proceedings of the ASME INTERNATIONAL GAS TURBINE INDIA CONFERENCE, Paper id- GTIndia-4781.

• K. Ganguly, A. Shereef, H. Roy, 2017, “A reduced model of higher order viscoelastic rotor using modified SEREP” Proceedings of International conference on Engineering vibration, Sofia, Bulgaria.

• S. Chandraker, J. K. Dutt, H. Roy, 2017, “Dynamic behaviour of mechanical system with elements having different constitutive law” Proceedings of International conference on Engineering vibration, Sofia, Bulgaria.

• R Kandi and S K Sahoo, “Design and Modeling of a Flexible Acoustic Horn for Ultrasonic Vibration Assisted Turning,” Proceedings of International Conference on Advances in Dynamics, Vibration and Control, ICADVC- 2016, National Institute of Technology, Durgapur, pp. 197-201, 2016.

• M P Satpathy, S K Sahoo, S Potnuru, K D Mohapatra, “Mechanical properties and interfacial characterization of aluminum-brass joint in ultrasonic welding”, ICEMS 2016, Jaipur National University, Jaipur.

• R. Kandi and S.K.Sahoo, Experimental Investigation on Machinability of Titanium Alloy, Ti-6Al-4V during Ultrasonic Vibration Assisted Turning, Proc. 6th International & 27th AIMTDR 2016 , December 16-18, 2016, College of Engineering Pune, India, PP. 232-235.

• M.P Satpathy and S.K.Sahoo, Ultrasonic Spot Welding of Dissimilar Metals: Mechanical Behaviour and Microstructural Analysis Proc. 6th International & 27th AIMTDR 2016 , December 16-18, 2016, College of Engineering Pune, India, PP. 936-939.

• B.R.Moharana, S.K.Sahoo and K.P. Maity, Experimental Investigation and Parametric Optimization of Welding of SS 304-Copper Dissimilar Metal Couple by Pulsed TIG Welding Process, Proc. 6th International & 27th AIMTDR 2016 , December 16-18, 2016, College of Engineering Pune, India, PP. 944-948.

• K. Mohapatra and S.K.Sahoo, Optimization of Single Pitch Error and MRR in a WEDM Gear cutting Process using MOORA Method. Proc. 6th International & 27th AIMTDR 2016, December 16-18, 2016, College of Engineering Pune, India, PP. 1689-1693.


146

• Srikar Potnuru, Susanta K. Sahoo and Santosh K. Sahoo, Multi-stage Extrusion/ Forging of Collet Chuck Holder: Numerical and Analytical Modelling of the Process, Proc. 6th International & 27th AIMTDR 2016 , December 16-18, 2016, College of Engineering Pune, India, PP. 1012-1016.

• Srikar Potnuru, Vivekananda kukkala, Susanta K. Sahoo and Suryansh Choudary, Multi Objective Optimization of Cutting Parameters in Turning Operation to Reduce Surface Roughness and Cutting Forces, National Conference on Innovations in Mechanical Engineering (NCIME’16), Madanapalle,517325. Andhra Pradesh (India), Oct.’ 21-22, 2016.

Papers accepted for publications • Sharma, N., Mahapatra, T. R., Panda, S. K. (2017), Numerical Study of Vibro-Acoustic Responses of Un-Baffled Multi-

Layered Composite Structure under Various End Conditions and Experimental Validation, Latin American Journal of Solids and Structures, (Accepted) (IF: 1.114) SCIE and SCOPUS.

• Sahoo, S. S., Hirwani, C. K., Panda, S. K., Sen, D. (2017), Numerical analysis of vibration and transient behaviour of laminated composite curved shallow shell structure: an experimental validation, Scientia Iranica, (Accepted) (IF: 1.025) SCIE and SCOPUS.

• Mehar, K., Panda, S. K. and Mahapatra, T. R. (2017), Thermoelastic Nonlinear Frequency Analysis of CNT Reinforced Functionally Graded Sandwich Structure, European Journal of Mechanics / A Solids DOI: 10.1016/j.euromechsol.2017.05.005 (IF: 2.453) SCI.

• Katariya, P. V., Panda, S. K. and Mahapatra, T. R. (2017), Bending and vibration analysis of skew sandwich plate, Aircraft Engineering and Aerospace Technology (Accepted) (IF: 0.480) SCIE.

• Mehar, K. and Panda, S. K. (2017), Stress, Deflection and Frequency Analysis of CNT Reinforced Graded Sandwich Plate under Uniform and Linear Thermal Environment-A Finite Element Approach, Polymer Composites (Accepted).

• Mehar, K., Panda, S. K., Bui, T. Q., Mahapatra, T. R. (2017), Nonlinear Thermoelastic Frequency Analysis of Functionally Graded CNT Reinforced Single/Doubly Curved Shallow Shell Panels by FEM, Journal of Thermal Stresses (In Press) http://dx.doi.org/10.1080/01495739.2017.1318689 (IF: 1.169). SCI.

• Mahapatra, T. R., Kar, V. R., Panda, S. K., and Mehar, K. (2017), Nonlinear thermoelastic deflection of temperature dependent FGM curved shallow shell under nonlinear thermal loading, Journal of Thermal Stresses (In Press) http://dx.doi.org/10.1080/01495739.2017.1302788 (IF: 1.169). SCI.

• Mehar, K., Panda, S. K. (2017), Elastic Bending and Stress Analysis of CNT-Reinforced Composite Plate: Experimental, Numerical and Simulation, Advances in Polymer Technology (In Press) (1-15) DOI: 10.1002/adv.21821 (IF: 1.114) SCIE and SCOPUS.

• Hirwani, C. K, Panda, S. K., Mahapatra, T. R., and Mahapatra, S. S., (2017).Numerical Study of Dynamic Characteristics of Delaminated Composite Flat/Curved Shallow Shell Structure and Experimental Validation, ASCE J. Aerospace Engineering 10.1061/(ASCE)AS.1943-5525.0000756 (Accepted).

• Jena Shreeshan, Sakhare Gaurav M., Panda Subrata K. and Thirugnanam A., (2017) Evaluation and Prediction Of Human Gait Parameters Using Univariate, Multivariate and Step-Wise Statistical Methods, Journal of Mechanics in Medicine and Biology, (Accepted) (IF: 0.797) SCIE and SCOPUS.

• Kar, V. R. and Panda, S. K. (2016),Post-buckling analysis of shear deformable FG shallow spherical shell panel under uniform and non-uniform thermal environment (Accepted), Journal of Thermal Stresses, (IF: 1.169). SCI.

• Mehar, K. and Panda, S. K. (2016), Thermoelastic analysis of FG-CNT reinforced shear defromable composite plate under various loading, International Journal of Computational Methods, Accepted (IF: 1.123).SCIE.

• Kar, V. R. and Panda, S. K. (2016), Nonlinear Thermo-mechanical Behaviour of FGM Cylindrical/Hyperbolic/Elliptical Shell Panel with TD and TID Properties, (in press), Journal of Pressure Vessel Technology, ASME.

• Hirwani, C. K, Patil, R. Panda, S. K., Mahapatra, S. S., Mandal, S. K., Srivastava, L., Buragohain, M. K., (2016) Experimental and Numerical Analysis of Free Vibration of Delaminated Curved Panel, Aerospace Science and Technology, (Accepted) DOI /10.1016/j.ast.2016.05.009 (IF: 0.940) SCI.

• Mehar, K. and Panda, S. K. (2016),Thermoelastic Flexural Analysis of FG-CNT Doubly Curved Shell Panel, Aircraft Engineering and Aerospace Technology, DOI: 10.1108/AEAT-11-2015-0237 (IF: 0.480) SCIE.

• Kar, V. R. and Panda, S. K. (2016), Geometrical nonlinear free vibration analysis of FGM spherical panel under nonlinear thermal loading with TD and TID properties, Journal of Thermal Stresses (Accepted) DOI: 10.1080/01495739.2016.1188623 (IF: 1.169). SCI.

• Mehar, K., Panda, S. K., Bui, T. Q., Mahapatra, T. R. (2017), Nonlinear Thermoelastic Frequency Analysis of Functionally Graded CNT Reinforced Single/Doubly Curved Shallow Shell Panels by FEM, Journal of Thermal Stresses (In Press) http://dx.doi.org/10.1080/01495739.2017.1318689 (IF: 1.169). SCI.


147

• Influences of micro-blasting as surface treatment technique on properties and performance of AlTiN coated tools, Journal of Manufacturing Processes, Jacob, A., Gangopadhyay, S., Satapathy, A., Mantry, S., Jha, B.B., Accepted, 2017.

• Performance Evaluation of a Hard Composite Solid Lubricant Coating when Dry Machining of High Carbon Steel, Gangopadhyay, S., Bhaduri, D., Chattopadhyay, A. K., Paul, S., Tribology Transaction, Accepted, 2017.

• State of the art in powder mixed electric discharge machining: A review, Talla, G., Gangopadhyay, S., Biswas, C.K., IMech E, Part B, Journal of Engineering Manufacture, DOI: 10.1177/0954405416634265, 2016.

• Evaluation of micro features of chips of Inconel 825 during dry turning with uncoated and CVD multilayer coated tools, Thakur, A., Gangopadhyay, S., IMech E, Part B, Journal of Engineering Manufacture, Accepted, 2016.

• Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra, A Risk-based Decision Support Framework for Selection of Appropriate Safety Measure System for Underground Coal Mines, International Journal of Injury Control and Safety Promotion. (Published Online) DOI: 10.1080/17457300.2015.1061561.

• Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra, Analysis of Occupational Health Hazards and Associated Risks in Fuzzy Environment: A Case Research in an Indian Underground Coal Mine, International Journal of Injury Control and Safety Promotion. (Published Online) DOI: 10.1080/17457300.2016.1178298.

• Rahul, Kumar Abhishek, Saurav Datta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Machining Performance Optimization for Electro Discharge Machining of Inconel 601, 625, 718 and 825: An Integrated Optimization Route Combining Satisfaction Function, Fuzzy Inference System and Taguchi Approach, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer-Verlag London Limited. (Published Online) DOI: 10.1007/s40430-016-0659-7.

• Chitrasen Samantra, Saurav Datta, Siba Sankar Mahapatra, Fuzzy Based Risk assessment module for metropolitan construction project: An Empirical Study, Engineering Applications of Artificial Intelligence. (Published Online) DOI: 10.1016/j.engappai.2017.04.019.

• Rahul, Saurav Datta, Manoj Masanta, Bibhuti Bhusan Biswal, Siba Sankar Mahapatra, Analysis on Surface Characteristics of Electro-Discharge Machined Inconel 718, International Journal of Materials and Product Technology. (Accepted).

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, 2017, Dominance Based Fuzzy Decision Support Framework for G-Resilient (Ecosilient) Supplier Selection: An Empirical Modeling, International Journal of Sustainable Engineering. (Published Online) DOI: http://dx.doi.org/10.1080/19397038.2017.1286410.

• Dilip Kumar Sen, Saurav Datta, Saroj Kumar Patel, Siba Sankar Mahapatra, Green Supplier Selection in Fuzzy Context: A Decision Making Scenario on Application of Fuzzy-MULTIMOORA, International Journal of Services and Operations Management. (Accepted).

• Chandramani Upadhyay, Rahul, Saurav Datta, Siba Sankar Mahapatra, Bibhuti Bhusan Biswal, An Experimental Investigation on Electro Discharge Machining (EDM) of Inconel 601, International Journal of Industrial and Systems Engineering. (Accepted).

• Dilip Kumar Sen, Saurav Datta, Siba Sankar Mahapatra, Sustainable Supplier Selection in Intuitionistic Fuzzy Environment: A Decision Making Perspective, Benchmarking: an International Journal. (Accepted).

• H. Roy, A. Khare, S. Chandraker, J. K. Dutt, “Fatigue based design and life estimation of viscoelastic rotors”, Accepted for publication in the Aircraft Engineering and Aerospace Technology: An International Journal, DOI: 10.1108/AEAT-01-2015-0015.R2.

• S. Kumar, A. Mitra and H. Roy, ”Large amplitude free vibration study of non-uniform plates with in-plane material inhomogeneity”, Accepted for publication in IMech Part L: Journal of materials: Design and Applications, DOI: 10.1177/1464420715627477.

• Akshaya Kumar Rout, Kalipada Maity and Susanta Kumar Sahoo, FEM Modeling of Extrusion of Square Billet to Square Product Through Cosine Dies, Journal of The Institution of Engineers (India): Series C, DOI 10.1007/s40032-016-0245-x .

• Kasinath Das Mohapatra and Susanta Kumar Sahoo, Analysis of process parameters in WEDM gear cutting process using entropy gre relational analysis approach, International Journal of Manufacturing Research (IJMR), Vol xx, no. xx, pp. xxx-xxx, 2017.

• M.P. Satapathy, Abhishek and S.K.Sahoo Effect of brass interlayer sheet on microstructure and joint performance of ultrasonic spot welded copper-steel joints, Journal of Materials Engineering and Performance, Vol xx, no. xx, pp. xxx-xxx, 2017.

• Kasinath Das Mohapatra and Susanta Kumar Sahoo, A multi objective optimization of gear cutting in WEDM of Inconel 718 using TOPSIS method, Decision Science Letters, Vol 7, no. xx, pp. xxx-xxx, 2018.

• M.P. Satapathy and S.K.Sahoo Experimental and Numerical Studies on Ultrasonic Welding of Dissimilar Metals, Journal of Advanced Manufacturing Technology, Vol xx, no. xx, pp. xxx-xxx, 2017. DOI: 10.1007/s00170-017-0694-2.

• Kumar, C.S., Patel, S.K.,2017 Hard machining performance of PVD AlCrN coated Al2O3/TiCN ceramic inserts as a function of thin film thickness, Ceramics International, ISSN 0272-8842, Impact Factor = 2.986http://dx.doi.org/10.1016/j.ceramint.2017.07.030.


148

Books/Book Chapter

Sl. No. Title Publisher-name & Year Authors (same order as in publication)

Remarks (whether authored or edited)

1 Operations Research Scientific Publishers, 2017

PK Mohanty & SK Patel Authored

Patents and Design Registration • Patent applied for Ultra-Portable Washing Machine (916/KOL/2014) on 08.09.2014. (Siba Sankar Mahapatra, Ayas Kanta

Swain, Kirti Sai Shukla, Mrityunjay Sharma and Anurag Mishra).

• Patent applied for Gravity Flow Portable Water Bottle with Filtration System (961/KOL/2014) on 22.09.2014. (Raj Kishore Patel, Siba Sankar Mahapatra, Sandip Mondal and Swayam Bikash Mishra).

• Registration of Design granted for Portable Water Bottle (265832) on 18.09.2014. (Raj Kishore Patel, Siba Sankar Mahapatra, Sandip Mondal and Swayam Bikash Mishra).

Awards Received / Distinction Achieved• Er. Ganesh Mishra Memorial Award was received by Prof. S.K Sahoo for best paper presented at the 58th Annual Technical

Session of the Institution of Engineers (India), Orissa -2017.

• Sankarsan Jena Memorial Award was received by Prof. S.K Sahoo for best paper presented at the 57th Annual Technical Session of the Institution of Engineers (India), Orissa -2016.

• COSMIC OUTSTANDING RESEARCH AWARD-2017 was received by Prof. S.K Panda for contribution in the field of Applied Research at AETM Conference-2017 Thailand.

• Best Technical Paper award was received by Prof. S.K Panda in the field of Computer Aided Design Applications in Engineering during 58th Annual Technical Session at Institute of Engineers, Odisha state centre on 16th February 2017.

Technical Association/ Societies: SAE member

SEMINAR/SYMPOSIA/SUMMER SCHOOL/WINTER SCHOOL/SHORT TERM COURSES/WORKSHOPS CONDUCTED BY DEPARTMENTS, PARTICIPATION BY FACULTY MEMBERS

Seminar, Symposia, Summer School/Winter School, Short Term Courses:

(a) Conducted Sponsoring Agency Name of the Coordinator Title of the course DurationTEQIP Prof. S.K. Panda Applied Mathematics and Mechanics of

Composite and Functional MaterialsDecember 15-17th

2016

(b) Participated:Name of the Staff

Course Seminar Organization Period Venue

Effect of skew angle on free vibration responses of sandwich composite plate

AETM 2017, Bangkok, Thailand, 6th January 2017

6th January 2017 Thailand

Nonlinear Finite Element Solution of Post-buckling Responses of FGM Panel Structure under Elevated Thermal Load and TD and TID Properties

International Conference on Advanced Technologies in Manufacturing and Materials Engineering 2017, January 5th-7th, Thailand

January 5th-7th Thailand

Prof. S DattaNational Level Symposium on Materials Characterization and Manufacturing (MCM-2016)

Organized by Department of Mechanical Engineering, P. C. College of Engineering, Verna, Goa 403722, in collaboration with Department of Physics, Goa University, Taleigao Plateau, Goa 403206.

18th & 19th August 2016

Goa University


149

RESEARCH PROJECT: Name of the Project Sponsoring Agency Name of the PI Total value in

(Rs. In Lakhs)Start date Close

dateExperimental and Numerical Investigation of Vibration Control of Laminated Composite Panel Bonded with Piezoelectric Materials

DST Prof. S.K. Panda 24.20 August 2013

Experimental and numerical investigation of Dynamic behavior of De-laminated Carbon- Epoxy Composite Rocket motor casings (CRMCs) under Hygro-Thermal-Mechanical loading – Role of size of Delamination/Defects

DRDO Prof. S.K. Panda 61.0042 Lakh March, 2015

Design and development of DMA MHRD (Under IMPRINT scheme)

Dr. T.Roy (PI), Dr. S. Gangopadhyay (Co-PI)

and others

3.60 Crores

Development of advanced PVD coatings for machining nickel-based super alloys

DST Dr. S. Gangopadhyay (PI) and Dr. T. Roy (Co-PI)

12.45 Lacs

Development and characterization of hard and wear resistance TiB2-TiC ceramic composite coating on steel by electro discharge coating (EDC) process

DST/SERB PI- Dr. Manoj Masanta 26.5 Lacks

Development of an ultrasonic head for turning

SERB Prof. S.K.Sahoo & Pro. M. Moharana

38.5

EQUIPMENT ACQUIRED: Sl. No. Name of the equipment Value in (Rs. In Lakhs)1 Dynamic Mechanical Analyzer 34.22 Tool dynamometer with charge amplifier 17.33 Thermal image camera 8.34 Surface wear tester 12.45 DAQ with high speed camera 7.5

LIST OF LABORATORIES DEVELOPED: Sl. No. Name of the Laboratory1 Tribology Laboratory

2 Laser Laboratory3 RP Laboratory4 Cryogenics Laboratory5 Metal forming Lab6 Dynamic mechanical Lab


150

PH. D. DEGREES AWARDED: Name of the Student Title of the thesis Name of the Supervisor

Sambit kumar Mohapatra Aluminum Based Material Extrusion Through Mathematical Contoured Die: Numerical and Experimental Investigation

Prof. Kalipada Maity

Aruna Thakur Influence of Advanced Coated Tools On Machinability Characteristics of Incoloy 825

Dr. Soumya Gangopadhyay, Prof. Kalipada Maity

Benedict Thomas Vibration Analysis of Functionally Graded Carbon Nanotubes Reinforced Composite Shell Structures

Prof. Tarapada Roy, Prof. Bijoy Kumar Nanda

Sasmita Sahu Inspection and Monitoring of Structural Damage using Vibration Signatures and Smart Techniques

Prof. Dayal Ramakrushna Parhi

Prerana Nashine Numerical Analysis of Transient Radiation Heat Transfer in Participating Medium Subjected to Short Pulse Collimated Beam

Prof. Ashok Kumar Satapathy

Swayam Bikash Mishra A Study on Parametric Appraisal of Fused Deposition Modelling (FDM) Process

Prof. Siba Sankar Mahapatra

Adik Ramdayal Yadao Dynamic Analysis of Cracked Rotor In Viscous Medium And Its Crack Diagnosis using Intelligent Techniques


Anish Pandey Mobile Robot Navigation in the Static and Dynamic Environments using Various Soft Computing Techniques


Srikar Potnuru Numerical, Analytical and Experimental Analysis of Combined Extrusion Forging Processes Applied to Collet Chuck Holders

Prof. Susanta Kumar Sahoo, Prof. Santosh Kumar Sahoo

Shakti Prasanna Jena Dynamic Analysis and Fault Detection of Multi Cracked Structure Under Moving Mass using Intelligent Methods


Bijaya Bijeta Nayak Parametric Optimization of Taper Cutting Process using Wire Electrical Discharge Machining (WEDM)

Prof. Siba Sankar Mahapatra

Niharika Mohanta Preparation and characterization of luffa cylindrca fiber reinforced polymer composite


Gangadharudu Talla Powder-mixed Electric Discharge Machining (PMEDM) of Inconel 625

Dr. Soumya Gangopadhyay, Prof. Chandan Kumar Biswas

Abhijeet Ganguly Economic Design of Control Charts using Metaheuristic Approaches Prof. Saroj Kumar Patel

Saurabh Chandraker Modelling and Model Reduction of Viscoelastic Composite Rotors - An Operator Based Approach

Prof. Haraprasad Roy, Prof. Tarapada Roy

Kapura Tudu Experimental Studies of a Direct Injection Diesel Engine Fuelled with Light Fraction Pyrolysis Oil-Diesel Blend

Prof. Saroj Kumar Patel, Prof. S. Murugan

Debabrata Barik Experimental Studies On Biogas Production and Its Utilization In A Direct Injection Diesel Engine Run On Dual Fuel Mode

Prof. S. Murugan

Irshad Ahmad Study of Computational and Experimental Methodologies for Cracks Recognition of Vibrating Systems using Modal Parameters


Arun kumar Wamankar Experimental Studies on Analysis Performance, Emissions and Combution Characteristics of Carbon Blends as Fuel in a CI Enginee

Prof. S. Murugan

Vijay Kumar Singh Nonlinear Dynamic Analysis of Laminated Composite Doubly Curved Shallow Shell Panel Bonded with and without Piezoelectric Layer

Prof. Subrata Kumar Panda

Shubhasri Kundu Navigational Strategies for Control of Underwater Robot using AI based Algorithms


Prases Kumar Mohanty Analysis and Development of Computational Intelligence based Navigational Controllers for Multiple Mobile Robots


Bhumeshwar Kunjilal Patle

Intelligent Navigational Strategies for Multiple Wheeled Mobile Robots using Artificial Hybrid Methodologies


Alok kumar Jha Intelligent Control and Path Planning of Multiple Mobile Robots using Hybrid AI Techniques


Rajasekhar MDynamic Analysis, Identification and Control Studies of Aero-Engine Model Rotor Bearing Systems

Prof. Jonnalagadda Srinivas, Dr.C.V.Gopinath


151

M. TECH. (R) DEGREES AWARDED: Name of the Student Title of the thesis Name of the Supervisor

Rudranarayan Kandi Acoustic Horn Design, Numerical and Experimental Investigations of Ultrasonic Vibration Assisted Turning of Ti-6Al-4V

Prof. Susanta Kumar Sahoo

Somen BiswalProcessing and Characterization of Epoxy Composites Reinforced with Short Palmyra Fibers

Prof. Alok Satapathy

Rameez MalikStudies on Metallization of RP Parts for use in Preserving Artefacts Prof. Siba Sankar Mahapatra

Sushree Sasmita SahooExperimental and Numerical Investigation of Static and Dynamic Analysis of Delaminated Composite Plate

Prof. Subrata Kumar Panda

Samresh GarnaikOn The Damping Analysis of Layered Beam Structures Prof. Sukesh Chandra Mohanty

Mimosha DashA Study on Thermal Characteristics of Epoxy Composites Filled with Natural Fiber and Particulate

Prof. Alok Satapathy

Rupalika Dash Modeling and CFD Simulation of Abrasive Flow Machining Process

Prof. Kalipada Maity

Madhusmita Senapati Design and Control of an Articulated Robotic Arm using Visual Inspection for Replacement Activities

Prof. Jonnalagadda Srinivas

Geetanjali Das Processing, Characterization and Erosion Wear Behaviour of Coir Fiber Reinforced Epoxy Composites

Prof.(Ms.) Sandhyarani Biswas

Samarendra Pattanaik Improvement in Service Life of Skip Car by using Chromium Carbide Overlay Plate with Special Reference to Rourkela Steel Plant



152

Department of METALLURGICAL & MATERIALS ENGINEERING


249 | P a g e





40

33

7

13

0

5

10

15

20

25

30

35

40

45

B.Tech. M.Tech.(2 Years) M.Tech. Dual (5 Years) Ph.D.

177

5942

0

20

40

60

80

100

120

140

160

180

200

B.Tech. M.Tech (2 Years) M.Tech Dual (5 Years)


249 | P a g e





40

33

7

13

0

5

10

15

20

25

30

35

40

45

B.Tech. M.Tech.(2 Years) M.Tech. Dual (5 Years) Ph.D.

177

5942

0

20

40

60

80

100

120

140

160

180

200

B.Tech. M.Tech (2 Years) M.Tech Dual (5 Years)


250 | P a g e

FACULTY NAME:

Sl.No. Name & Specialization1 Prof. Sudipta Sen ([email protected])

Associate Professor, Ph.D. (IIT Kharagpur)Physical Metallurgy

2 Prof. Anindya Basu ([email protected])Associate Professor , Ph.D.( IIT Kharagpur)Physical Metallurgy, Surface Engineering

3 Prof. Swapan Kumar Karak ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Nanostructured materials, Composites, ODS Alloys, Joining of Materials

4 Prof. Bipin Bihari Verma ([email protected])Professor, Ph.D. (IIT Delhi)Mechanical Metallurgy, Fracture Mechanics

5 Prof. Krishna Dutta ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Mechanical Metallurgy

6 Prof. Anshuman Patra, ([email protected])Assistant Professor, M.Tech (IIT Kharagpur),Nanostructured Materials, High Temperature Materials, ODS Alloys

7 Prof. Smarajit Sarkar ([email protected])HOD and Associate Professor, Ph.D. (IIT Kharagpur)Metal matrix composites, Industrial Metallurgy

8 Prof. Mithilesh Kumar ([email protected])Associate Professor, Ph.D. (BHU)Process Mettallurgy

9 Prof. D. Nagrajan ([email protected])Assistant Professor, PhD (University of Queensland, Brisbane)Incremental Sheet Forming, Sheet Metal Forming Processes, Industrial Optical 3d Measurement Techniques, Severe Plastic Deformation, Light Alloys Development.

10 Prof. Syed Nasimul Alam ([email protected])Assistant Professor, Ph.D.( IIT Kharagpur)Nanomaterials, Materials Characterization, X-Ray Diffraction

11 Prof. Natraj Yedla ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)

15

1 1 12

3

1

7

4

2

9

21

0

2

4

6

8

10

12

14

16

BhushanPower & SteelLimited (BPSL)

EXL Service Jindal SteelLtd.

Tata Sponge& Iron Limited

TRL KrosakiRefractories

Ltd.

Vedanta ZS Associates


153

FACULTY NAME:Sl.No. Name & Specialization1 Prof. Sudipta Sen ([email protected])

Associate Professor, Ph.D. (IIT Kharagpur)Physical Metallurgy

2 Prof. Anindya Basu ([email protected])Associate Professor , Ph.D.( IIT Kharagpur)Physical Metallurgy, Surface Engineering

3 Prof. Swapan Kumar Karak ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Nanostructured materials, Composites, ODS Alloys, Joining of Materials

4 Prof. Bipin Bihari Verma ([email protected])Professor, Ph.D. (IIT Delhi)Mechanical Metallurgy, Fracture Mechanics

5 Prof. Krishna Dutta ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Mechanical Metallurgy

6 Prof. Anshuman Patra, ([email protected])Assistant Professor, M.Tech (IIT Kharagpur),Nanostructured Materials, High Temperature Materials, ODS Alloys

7 Prof. Smarajit Sarkar ([email protected])HOD and Associate Professor, Ph.D. (IIT Kharagpur)Metal matrix composites, Industrial Metallurgy

8 Prof. Mithilesh Kumar ([email protected])Associate Professor, Ph.D. (BHU)Process Mettallurgy

9 Prof. D. Nagrajan ([email protected])Assistant Professor, PhD (University of Queensland, Brisbane)Incremental Sheet Forming, Sheet Metal Forming Processes, Industrial Optical 3d Measurement Techniques, Severe Plastic Deformation, Light Alloys Development.

10 Prof. Syed Nasimul Alam ([email protected])Assistant Professor, Ph.D.( IIT Kharagpur)Nanomaterials, Materials Characterization, X-Ray Diffraction

11 Prof. Natraj Yedla ([email protected])Assistant Professor, Ph.D. (IIT Kharagpur)Materials Modeling-deformation behavior of metallic glasses, Deformation behavior of metals

12 Prof. S. Pal ([email protected])Assistant Professor, Ph.D. (IIT Khragpur)Computational Materials Engineering, Material Processing

13 Prof. Bankim Chandra Ray ([email protected])Professor, Ph.D. (IIT Kharagpur)Physical Metallurgy, Polymer Composites

14 Prof. Debasis Chaira ([email protected])Assistant Professor, Ph.D. (IIT Kanpur)Nanomaterials, Physical Metallurgy, Composites

15 Prof. Ashok Kumar Mondal ([email protected])Assistant Professor, Ph. D. (IISc Bangalore)Light metals, Mechanical Behaviour

16 Prof. Rajesh Kumar Prusty ([email protected])Assistant Professor, M.E. (IISc Bangalore)Composite materials, Mechanical behaviour, Environmental damage and degradation

17 Prof. Subash Chandra Mishra ([email protected])Professor, Ph.D. (IIT Kharagpur)Plasma Technology, Polymer Composite

18 Prof.(Ms.) Archana Mallick ([email protected])Assistant Professor, Ph. D. (NIT Rourkela)Advanced Materials Processing, Thin Solid Films


154

Sl.No. Name & Specialization19 Prof. Santosh Kumar Sahoo ([email protected])

Assistant Professor, Ph.D. (IIT Bombay)Crystallographic Texture, Plastic Deformation, Microstructural Developments

20 Prof. Ajit Behera ([email protected])Assistant Professor, Ph.D. (IIT Khragpur)Surface Engineering, Advanced Materials, Thin Film

PUBLICATION

Publications in Journals• Prusty R.K., Rathore D.K., Ray B.C., "Evaluation of the role of functionalized CNT in glass fiber/epoxy composite at above- and

sub-zero temperatures: Emphasizing interfacial microstructures", Composites Part A: Applied Science and Manufacturing, vol. 101, no. , pp. 215-226, 2017, cited by 0.

• Bhatt N.H., Chouhan D., Pati A.R., Varshney P., Das L., Kumar A., Munshi B., Behera A., Mohapatra S.S., "Role of water temperature in case of high mass flux spray cooling of a hot AISI 304 steel plate at different initial surface temperatures", Experimental Heat Transfer, vol. 30, no. 5, pp. 369-392, 2017, cited by 0.

• Sahani P., Chaira D., "Nonlubricated Sliding Wear Behavior Study of SiC-B4C-Si Cermet Against a Diamond Indenter", Journal of Tribology, vol. 139, no. 5, pp. -, 2017, cited by 0.

• Vijay Reddy K., Meraj M., Pal S., "Mechanistic study of bending creep behaviour of bicrystal nanobeam", Computational Materials Science, vol. 136, no. , pp. 36-43, 2017, cited by 0.

• Bal S., Saha S., "Effect of sea and distilled water conditioning on the overall mechanical properties of carbon nanotube/epoxy composites", International Journal of Damage Mechanics, vol. 26, no. 5, pp. 758-770, 2017, cited by 0.

• Sahu V.K., Ray P.K., Verma B.B., "Experimental fatigue crack growth analysis and modelling in part-through circumferentially pre-cracked pipes under pure bending load", Fatigue and Fracture of Engineering Materials and Structures, vol. 40, no. 7, pp. 1154-1163, 2017, cited by 0.

• Behera A., Suman R., Aich S., Mohapatra S.S., "Sputter-deposited Ni/Ti double-bilayer thin film and the effect of intermetallics during annealing", Surface and Interface Analysis, vol. 49, no. 7, pp. 620-629, 2017, cited by 0.

• Bhatt N.H., Pati A.R., Kumar A., Behera A., Munshi B., Mohapatra S.S., "High mass flux spray cooling with additives of low specific heat and surface tension: A novel process to enhance the heat removal rate", Applied Thermal Engineering, vol. 120, no. , pp. 537-548, 2017, cited by 0.

• Sreenivasan S., Mishra S.K., Dutta K., "Ratcheting strain and its effect on low cycle fatigue behavior of Al 7075-T6 alloy", Materials Science and Engineering A, vol. 698, no. , pp. 46-53, 2017, cited by 0.

• Patra A., Saxena R., Karak S.K., Laha T., Sahoo S.K., "Fabrication and characterization of nano-Y2O3 dispersed W-Ni-Mo and W-Ni-Ti-Nb alloys by mechanical alloying and spark plasma sintering", Journal of Alloys and Compounds, vol. 707, no., pp. 245-250, 2017, cited by 0.

• Rathore D.K., Prusty R.K., Ray B.C., "Mechanical, thermomechanical, and creep performance of CNT embedded epoxy at elevated temperatures: An emphasis on the role of carboxyl functionalization", Journal of Applied Polymer Science, vol. 134, no. 21, pp. -, 2017, cited by 0.

• Mishra S.K., Roy H., Mondal A.K., Dutta K., "Damage Assessment of A356 Al Alloy Under Ratcheting–Creep Interaction", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, no. 6, pp. 2877-2885, 2017, cited by 0.

• Talapaneni T., Yedla N., Pal S., Sarkar S., "Experimental and Theoretical Studies on the Viscosity–Structure Correlation for High Alumina-Silicate Melts", Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 48, no. 3, pp. 1450-1462, 2017, cited by 0.

• Nagarajan D., Ren X., Cáceres C.H., "Anelastic behavior of Mg-Al and Mg-Zn solid solutions", Materials Science and Engineering A, vol. 696, no. , pp. 387-392, 2017, cited by 0.

• Vijay Reddy K., Halder C., Pal S., "Influence of Carbon Equivalent Content on Phase Transformation During Inter-critical Heating of Dual Phase Steels Using Discrete Micro-scale Cellular Automata Model", Transactions of the Indian Institute of Metals, vol. 70, no. 4, pp. 909-915, 2017, cited by 0.

• Patra S., Nayak J., Singhal L.K., Pal S., "Prediction of Nitrogen Content of Steel Melt during Stainless Steel Making Using AOD Converter", Steel Research International, vol. 88, no. 5, pp. -, 2017, cited by 0.


155

• Nasimul Alam S., Sharma N., Chandra Ray B., Yadav S., Biswas K., "Effect of graphite nanoplatelets on the mechanical properties of alumina-based composites", Ceramics International, vol. 43, no. 14, pp. 11376-11389, 2017, cited by 0.

• Mahato K.K., Dutta K., Ray B.C., "High-temperature tensile behavior at different crosshead speeds during loading of glass fiber-reinforced polymer composites", Journal of Applied Polymer Science, vol. 134, no. 16, pp. -, 2017, cited by 0.

• Maharana H.S., Panda S., Basu A., "Effect of texture and microstructure on properties of electrodeposited Cu-SiO2 and Cu-Y2O3 coatings", Surface and Coatings Technology, vol. 315, no. , pp. 558-566, 2017, cited by 0.

• Mahato K.K., Dutta K., Ray B.C., "Static and Dynamic Behavior of Fibrous Polymeric Composite Materials at Different Environmental Conditions", Journal of Polymers and the Environment, vol. , no. , pp. 1-27, 2017, cited by 0.

• Kumar L., Nasimul Alam S., Sahoo S.K., "Mechanical properties, wear behavior and crystallographic texture of Al-multiwalled carbon nanotube composites developed by powder metallurgy route", Journal of Composite Materials, vol. 51, no. 8, pp. 1099-1117, 2017, cited by 0.

• Prusty R.K., Ghosh S.K., Rathore D.K., Ray B.C., "Reinforcement effect of graphene oxide in glass fibre/epoxy composites at in-situ elevated temperature environments: An emphasis on graphene oxide content", Composites Part A: Applied Science and Manufacturing, vol. 95, no. , pp. 40-53, 2017, cited by 1.

• Vijay Reddy K., Pal S., "Contribution of Nb towards enhancement of glass forming ability and plasticity of Ni-Nb binary metallic glass", Journal of Non-Crystalline Solids, vol. , no. , pp. -, 2017, cited by 0.

• Shashanka R., Chaira D., "Effect of Sintering Temperature and Atmosphere on Nonlubricated Sliding Wear of Nano-Yttria-Dispersed and Yttria-Free Duplex and Ferritic Stainless Steel Fabricated by Powder Metallurgy", Tribology Transactions, vol. 60, no. 2, pp. 324-336, 2017, cited by 0.

• Meraj M., Pal S., "Effect of temperature and stress on creep behavior of ultrafine grained nanocrystalline Ni-3 at% Zr alloy", Metals and Materials International, vol. 23, no. 2, pp. 272-282, 2017, cited by 0.

• Prusty R.K., Rathore D.K., Sahoo S., Parida V., Ray B.C., "Mechanical behaviour of graphene oxide embedded epoxy nanocomposite at sub- and above- zero temperature environments", Composites Communications, vol. 3, no. , pp. 47-50, 2017, cited by 0.

• Mahato K.K., Rathore D.K., Dutta K., Ray B.C., "Effect of loading rates of severely thermal-shocked glass fiber/epoxy composites", Composites Communications, vol. 3, no. , pp. 7-10, 2017, cited by 1.

• Pal S., Halder C., "Optimization of Phosphorous in Steel Produced by Basic Oxygen Steel Making Process Using Multi-Objective Evolutionary and Genetic Algorithms", Steel Research International, vol. 88, no. 3, pp. -, 2017, cited by 0.

• Rathore D.K., Prusty R.K., Mohanty S.C., Singh B.P., Ray B.C., "In-situ elevated temperature flexural and creep response of inter-ply glass/carbon hybrid FRP composites", Mechanics of Materials, vol. 105, no. , pp. 99-111, 2017, cited by 0.

• Prusty R.K., Rathore D.K., Ray B.C., "CNT/polymer interface in polymeric composites and its sensitivity study at different environments", Advances in Colloid and Interface Science, vol. 240, no. , pp. 77-106, 2017, cited by 0.

• Meraj M., Pal S., "Healing mechanism of nanocrack in nanocrystalline metals during creep process", Applied Physics A: Materials Science and Processing, vol. 123, no. 2, pp. -, 2017, cited by 0.

• Maharana H.S., Basu A., "Evolution and structure-property correlation of CTAB assisted high hardness electrodeposited Cu-ZrO2 nano-cone arrays", Surface and Coatings Technology, vol. 310, no. , pp. 148-156, 2017, cited by 0.

• Kumar P., Mondal A.K., Chowdhury S.G., Krishna G., Ray A.K., "Influence of additions of Sb and/or Sr on microstructure and tensile creep behaviour of squeeze-cast AZ91D Mg alloy", Materials Science and Engineering A, vol. 683, no. , pp. 37-45, 2017, cited by 1.

• Meher A., Chaira D., "Effect of Graphite and SiC Addition into Cu and SiC Particle Size Effect on Fabrication of Cu–Graphite–SiC MMC by Powder Metallurgy", Transactions of the Indian Institute of Metals, vol. , no. , pp. 1-11, 2017, cited by 0.

• Kreethi R., Mondal A.K., Dutta K., "Ratcheting fatigue behaviour of 42CrMo4 steel under different heat treatment conditions", Materials Science and Engineering A, vol. 679, no. , pp. 66-74, 2017, cited by 1.

• Meraj M., Pal S., "Comparative creep behaviour study between single crystal Nickel and ultra-fine grained nano crystalline Nickel in presence of porosity at 1120 K temperature", Metallurgical Research and Technology, vol. 114, no. 1, pp. -, 2017, cited by 1.

• Yedla N., Ghosh S., "Nature of atomic trajectories and convective flow during plastic deformation of amorphous Cu50Zr50 alloy at room temperature-classical molecular dynamics studies", Intermetallics, vol. 80, no. , pp. 40-47, 2017, cited by 0.

• Mishra J., Sahni S., Sabat R., Hiwarkar V.D., Sahoo S.K., "Effect of cross-rolling on microstructure, texture and magnetic properties of non-oriented electrical steels", Materials Research, vol. 20, no. 1, pp. 218-224, 2017, cited by 0.

• Krishan J., Gupta P., Vaduganathan K., Yedla N., "Superplastic Pd50Pt50 monocrystalline bimetallic alloy nanowire: A molecular dynamics simulation study", Metallurgical Research and Technology, vol. 114, no. 3, pp. -, 2017, cited by 0.


156

• Pal S., Meraj M., Deng C., "Effect of Zr addition on creep properties of ultra-fine grained nanocrystalline Ni studied by molecular dynamics simulations", Computational Materials Science, vol. 126, no. , pp. 382-392, 2017, cited by 1.

• Maharana H.S., Rai P.K., Basu A., "Surface-mechanical and electrical properties of pulse electrodeposited Cu–graphene oxide composite coating for electrical contacts", Journal of Materials Science, vol. 52, no. 2, pp. 1089-1105, 2017, cited by 1.

• Nuthalapati M., Karak S.K., Majumdar J.D., Chakravarty D., Basu A., "Corrosion behavior and high temperature oxidation kinetics of nano-TiO2/Y2O3 dispersed zirconium alloys", Journal of Alloys and Compounds, vol. 689, no. , pp. 908-917, 2016, cited by 0.

• Nayak R.K., Mahato K.K., Routara B.C., Ray B.C., "Evaluation of mechanical properties of Al2O3 and TiO2 nano filled enhanced glass fiber reinforced polymer composites", Journal of Applied Polymer Science, vol. 133, no. 47, pp. -, 2016, cited by 1.

• Nath P., Sahu D.K., Mallik A., "Physicochemical and corrosion properties of sono-electrodeposited Cu-Ni thin films", Surface and Coatings Technology, vol. 307, no. , pp. 772-780, 2016, cited by 0

• Sahoo S.K., Ratha S., Rout C.S., Mallik A., "Physicochemical properties and supercapacitor behavior of electrochemically synthesized few layered graphene nanosheets", Journal of Solid State Electrochemistry, vol. 20, no. 12, pp. 3415-3428, 2016, cited by 0.

• Ahmedabadi P.M., Kain V., Agrawal A., "Modelling kinetics of strain-induced martensite transformation during plastic deformation of austenitic stainless steel", Materials and Design, vol. 109, no. , pp. 466-475, 2016, cited by 1.

• Nagarajan D., CÃ¡ceres C.H., Griffiths J.R., "Grain Size Hardening Effects in Mg-Gd Solid Solutions", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, no. 11, pp. 5401-5408, 2016, cited by 1.

• Patra A., Saxena R., Karak S.K., "Combined effect of Ni and nano-Y2O3 addition on microstructure, mechanical and high temperature behavior of mechanically alloyed W-Mo", International Journal of Refractory Metals and Hard Materials, vol. 60, no. , pp. 131-146, 2016, cited by 3.

• Maharana H.S., Basu A., "Surface-mechanical and oxidation behavior of electro-co-deposited Cu-Y2O3 composite coating", Surface and Coatings Technology, vol. 304, no. , pp. 348-358, 2016, cited by 1.

• Rathore D.K., Singh B.P., Mohanty S.C., Prusty R.K., Ray B.C., "Temperature dependent reinforcement efficiency of carbon nanotube in polymer composite", Composites Communications, vol. 1, no. , pp. 29-32, 2016, cited by 4.

• Bankoti A.K.S., Mondal A.K., Dieringa H., Ray B.C., Kumar S., "Impression creep behaviour of squeeze-cast Ca and Sb added AZ91 magnesium alloy", Materials Science and Engineering A, vol. 673, no. , pp. 332-345, 2016, cited by 1.

• Gupta P., Pal S., Yedla N., "Molecular dynamics based cohesive zone modeling of Al (metal)-Cu50Zr50 (metallic glass) interfacial mechanical behavior and investigation of dissipative mechanisms", Materials and Design, vol. 105, no. , pp. 41-50, 2016, cited by 3.

• Bhale P., Shastri H., Mondal A.K., Masanta M., Kumar S., "Effect of Deep Cryogenic Treatment on Microstructure and Properties of AE42 Mg Alloy", Journal of Materials Engineering and Performance, vol. 25, no. 9, pp. 3590-3598, 2016, cited by 1.

• Mohan S.K., Sarkar R., "A comparative study on the effect of different additives on the formation and densification of magnesium aluminate spinel", Ceramics International, vol. 42, no. 12, pp. 13932-13943, 2016, cited by 1.

• Mohapatra S., Bankoti A.K.S., Mondal A.K., Thirugnanam A., "Dry Sliding Wear and Corrosion Behaviour of Al-Based Hybrid Composites Reinforced with Micro-Tip and Micro/Nano-Al2O3p", Transactions of the Indian Institute of Metals, vol. 69, no. 6, pp. 1155-1167, 2016, cited by 0.

• Alam S.N., Kumar L., "Mechanical properties of aluminium based metal matrix composites reinforced with graphite nanoplatelets", Materials Science and Engineering A, vol. 667, no. , pp. 16-32, 2016, cited by 7.

• Sahani P., Karak S.K., Mishra B., Chakravarty D., Chaira D., "A Comparative Study on SiC-B4C-Si Cermet Prepared by Pressureless Sintering and Spark Plasma Sintering Methods", Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, no. 6, pp. 3065-3076, 2016, cited by 1.

• Sahani P., Karak S.K., Mishra B., Chakravarty D., Chaira D., "Effect of Al addition on SiC-B4C cermet prepared by pressureless sintering and spark plasma sintering methods", International Journal of Refractory Metals and Hard Materials, vol. 57, no. , pp. 31-41, 2016, cited by 2.

• Meraj M., Pal S., "The Effect of Temperature on Creep Behaviour of Porous (1 at.%) Nano Crystalline Nickel", Transactions of the Indian Institute of Metals, vol. 69, no. 2, pp. 277-282, 2016, cited by 1.

• Nagarajan D., Mohana Sivam P., "Microstructure and wear behavior of a functionally gradient al-si alloy prepared using the cast-decant-cast (CDC) process", Materials Performance and Characterization, vol. 5, no. 5, pp. 637-647, 2016, cited by 0.

• Shashanka R., Chaira D., "Effects of nano-Y2O3 and sintering parameters on the fabrication of PM duplex and ferritic stainless steels", Acta Metallurgica Sinica (English Letters), vol. 29, no. 1, pp. 58-71, 2016, cited by 1.

• Dash K., Ray B.C., "Implications of Degree of Thermal Shocks on Flexural Properties of Cu-Al2O3 Micro- and Nano-composites", Journal of Materials Engineering and Performance, vol. 25, no. 1, pp. 259-266, 2016, cited by 1.


157

• Kumar S.S., Sandeep E.S., Chandrasekhar S.B., Karak S.K., "Development of nano-oxide dispersed 304L steels by mechanical milling and conventional sintering", Materials Research, vol. 19, no. 1, pp. 175-182, 2016, cited by 0.

• Majumder O., Singh Bankoti A.K., Kaur T., Thirugnanam A., Mondal A.K., "The influence of silane and silane-PMMA coatings on the in vitro biodegradation behavior of AE42 magnesium alloy for cardiovascular stent applications", RSC Advances, vol. 6, no. 109, pp. 107344-107354, 2016, cited by 0.

• Dash K., Sukumaran S., Ray B.C., "The behaviour of aluminium matrix composites under thermal stresses", Science and Engineering of Composite Materials, vol. 23, no. 1, pp. 1-20, 2016, cited by .

• Gupta P., Yedla N., "High Temperature Mechanical Behavior of Aluminum- Cu50Zr50Metallic Glass Interface", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Sahoo S. K., Sabat R. K., Panda S., Mishra S. C., Suwas S., “Texture and microstructure evolution of pure zinc during rolling at liquid nitrogen temperature and subsequent annealing”, Materials Characterization, vol. 123, pp. 218-226, 2017, cited by 0.

• Sabat R. K., Sahoo S. K., “An 'ex situ' electron backscattered diffraction study of nucleation and grain growth in pure magnesium”, Materials and Design, vol. 116, pp. 65-76, 2017, cited by 0.

• Sabat R. K., Panda D., Sahoo S. K., “Growth mechanism of extension twin variants during annealing of pure magnesium: An 'ex situ' electron backscattered diffraction investigation”, Materials Characterization, vol. 126, pp. 10-16, 2017, cited by 0.

• Sabat R. K., Sahoo S. K., Bishoyi B. D., Bibhanshu N., Suwas S., “Improvement in mechanical properties of commercially pure titanium through reverse rolling”, Philosophical Magazine Letters, vol. 97, pp. 273-279, 2017, cited by 0.

• Sahoo S. K., Bishoyi B., Mohanty U. K., Sahoo S. K., Sahu J., Bathe R. N., “Effect of Laser Beam Welding on Microstructure and Mechanical Properties of Commercially Pure Titanium”, Transactions of IIM, Published Online, 2016, cited by 0.

• Nagarajan D., "Anelasticity in cast Mg-Gd alloys", Materials Science and Engineering A, vol. 695, pp. 14-19, 2017, cited by 0.

• Bal S., Saha S., "Mechanical performances of hygrothermally conditioned CNT/epoxy composites using seawater", Journal of Polymer Engineering, vol. 37, no. 6, pp. 633-45, 2016, cited by 1.

• Vaneshwar Kr. Sahu, P.K.Ray, B.B.Verma, “Experimental fatigue crack growth analysis and modelling in part- through circumferentially pre-cracked pipes under pure bending load”, Journal- Fatigue and fracture of engineering materials and structures (Wiley), pp 1-10, 2017, cited by 0.

• Sumanta Kumar Sahoo, B. C. Ray and Archana Mallik, “Role of electrochemically in-house synthesized and functionalized graphene nano-fillers on the structural performance of epoxy matrix composites”, Physical Chemistry Chemical Physics, vol. 19. no. , pp. 16219-16230, 2017, cited by 0.

Publications in Conferences• Mahato K.K., Rathore D.K., Prusty R.K., Dutta K., Ray B.C., "Tensile behavior of MWCNT enhanced glass fiber reinforced

polymeric composites at various crosshead speeds", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Pattanaik A., Bhyan S.K., Mishra S.C., Patro S.S., Behera A., "Dry Sliding Wear Behaviour of Micro oven Treated Fly Ash Reinforced Epoxy Composite using ExtendedTaguchi Approach Optimization", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Bhuyan S.K., Thiyagarajan T.K., Mishra S.C., "Development of Ceramic Coating on Metal Substrate using Industrial Waste and Ore Minerals", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Kotta A.B., Karak S.K., Kumar M., "Characterization of iron ore pellets with dextrin added organic binders under different time and temperature conditions", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Sahoo R.R., Patra A., Karak S.K., "Fabrication of nano ZrO2 dispersed novel W79Ni10Ti5Nb5 alloy by mechanical alloying and pressureless sintering", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Chakraverty A.P., Mohanty U.K., Mishra S.C., Biswal B.B., "Effect of Hydrothermal immersion and Hygrothermal Conditioning on Mechanical Properties of GRE Composite", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Saha S., Bal S., "Degradation in Mechanical and Thermal Properties of Partially Aligned CNT/Epoxy Composites due to Seawater Absorption", IOP Conference Series: Materials Science and Engineering, vol. 178, no. 1, pp. -, 2017, cited by 0.

• Gupta P., Yedla N., "Strain Rate and Temperature Effects on the Strength and Dissipative Mechanisms in Al-Cu50Zr50 Interface Model: Molecular Dynamics Simulation Study", Procedia Engineering, vol. 184, no. , pp. 631-636, 2017, cited by 0.

• Bhattacharjee A., Amarnath L., Dutta K., "Ratcheting Behaviour of a Sensitized Non-Conventional Austenitic Stainless Steel", Procedia Engineering, vol. 184, no. , pp. 756-764, 2017, cited by 0.

• Bhuyan P., Alam S.N., Panda D., Kumar L., Singh H., "Synthesis and Characterization of Cu-Fe3Al Composites using Powder Metallurgy Route", Materials Today: Proceedings, vol. 4, no. 2, pp. 213-223, 2017, cited by 0.


158

• Patra A., Karak S.K., Saxena R., "Fabrication and characterization of nano-ZrO2 dispersed W-based alloy by mechanical alloying and conventional sintering", Materials Today: Proceedings, vol. 4, no. 2, pp. 3891-3902, 2017, cited by 0.

• Bal S., "Micro graphical analysis and comparison of MWNT and CNF reinforced polymer composite", Springer Proceedings in Physics, vol. 186, no. , pp. 91-98, 2017, cited by 1.

• Mohanty M.K., Mishra S., Mishra B., Sarkar S., Samal S.K., "A Novel Technique for Making Cold Briquettes for Charging in Blast Furnace", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Pattanaik A., Bhuyan S.K., Samal S.K., Behera A., Mishra S.C., "Dielectric properties of epoxy resin fly ash composite", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Mohanty S.C., Singh B.P., Mahato K.K., Rathore D.K., Prusty R.K., Ray B.C., "Water absorption behavior and residual strength assessment of glass/epoxy and glass-carbon/epoxy hybrid composite", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Chakraverty A.P., Mohanty U.K., Mishra S.C., Biswal B.B., "Effect of Post-thermal shock on Prolonged Sea Water aged GFRP Composite", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 1.

• Meraj M., Pal S., "Deformation of Ni20W20Cu20Fe20Mo20 high entropy alloy for tensile followed by compressive and compressive followed by tensile loading: A molecular dynamics simulation based study", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Tripathy S., Mondal A.K., Dutta K., "Effect of pre-strain on ratcheting behavior of A668 Class D steel", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Nayak A.K., Shashanka R., Chaira D., "Effect of Nanosize Yittria and Tungsten Addition to Duplex Stainless Steel during High Energy Planetary Milling", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Bal S., Saha S., "Scheming of microwave shielding effectiveness for X band considering functionalized MWNTs/epoxy composites", IOP Conference Series: Materials Science and Engineering, vol. 115, no. 1, pp. -, 2016, cited by 0.

• Rout R. R., Mishra B., Sahoo N., Karak S. K., “Effect of WC and Si additions on the mechanical properties of ZrB2-WC-Si based cermets”, IOP Conference Series: Materials Science and Engineering, Vol.178 (2017) pp.012034, cited by 0.

• Singh, B.P., Rathore, D. K., Mohanty, S.C., Prusty, R.K., Ray, B.C., “In-situ Elevated Temperature Mechanical Performance of MWCNT/epoxy Nanocomposite”, Sensors & Transducers, vol. 210, no. 3, pp 17-19, 2017, cited by 0.

Paper Accepted for Publication• H. Markanday and D. Nagarajan, “Formability Behavior Studies on CP-Al Sheets Processed through the Helical Tool Path of

Incremental Forming Process”, IOP Conf. Ser.: Mater. Sci. Eng., 2017, Under Publication.

• Satapathy M., Varshney P., Nanda D., Mohapatra S. S., Behera A., “Fabrication of durable porous and non-porous superhydrophobic polymer composite coatings with excellent self-cleaning property”, Surface and Coatings Technology, DOI:10.1016/j.surfcoat.2017.07.025.

• Behera A., Aich S., Ghosh S., “Simulation of magnetron sputtered Ni/Ti thin films and effect of annealing”, Emerging Materials Research.

• Saha S., Bal S., “Influence of nanotube content on the mechanical and thermo-mechanical behaviour of –COOH functionalized MWNTs/epoxy composites “, Bulletin of Materials Science, Springer, 2016.

• Saha S., Bal S., “Long term hydrothermal effect on mechanical and thermo-mechanical properties of carbon nanofiber doped epoxy composites”, Journal of Polymer Engineering, Degruyter, 2017.

• D. Narsimhachary, S. Pal, S. M. Shariff, G. Padmanabham, A. Basu, “AA6082 to DX56-steel Laser-brazing: process parameter - intermetallic formation correlation”, Journal of materials Engg. and Performance, 2017.

Books / Book Chapter• Patra A., Aluminium Alloys: From Casting to Customer, Studium Press India Pvt. Ltd., 2017. ISBN: 978-93-85046-00-1.

• Pal S., Patra A., Padhee P. R., Process Modeling for Steel Industry, I.K. International Publishing House Pvt. Ltd., (Accepted for Publication).

• Ajit Behera and S. S. Mohapatra, Coal Fly Ash Beneficiation-Treatment of Acid Mine Drainage with Coal Fly Ash (ISBN 978-953-51-5228-6), Book: Challenges in Recovery of Valuable and Hazardous Elements from Bulk Coal Fly ash and Options for Increasing Fly ash Utilization, Intech Publisher, 2017 (In Press).

• S. N. Alam, Chapter title: “Sample Preparation Techniques for Electron Microscopy 50 Years of SEM and Beyond!” Pages: 723-730, February 2017.

• S. N. Alam, Book title: “Microscopy and imaging science: practical approaches to applied research and education”, Editor: A. Méndez-Vilas, Publisher: Formatex Research Center, ISBN-13: 978-84-942134-9-6.


159

• S.C.Mishra, Akankshya Supriya, Chemical Treatment of Bio fibers; Publishing, GmBH & Co, KG, Germany, 2017, IBSN- 978-3-330-04318-3.Lambert Academic.

• Biswajit Swain, Ajit Behera and S.C.Mishra, Plasma Processing of Iron Ore Fines; Publishing, GmBH & Co, KG, Germany, 2017, IBSN- 978-3-330-06485-0, Lambert Academic.

Patent• Sahoo S. K., Mohanty U. K., Mishra B., Mishra S. C., Sarkar S., “A process for determination of the characteristic temperatures

of blast furnace slag”, 2016. Application number: 201631037069. (Filed)


By Faculty:• Young Faculty Award-2017 to Prof. A. Behera by 5th Faculty Branding Awards, Kolkata, India.

By Students:

Technical Association / SocietiesAll faculty members are life members of technical associations/societies like:

Indian Institute of Metals

The Institute of Engineers

Material Research Society of India

The Indian Science Congress Association

The Plasma Science Society of India


Conducted:• MHRD GIAN course on “Materials Selection in Engineering Design” was conducted by Dr. D. Nagarajan as Host Faculty along

with Prof. Carlos H Caceres of the University of Queensland, Brisbane, Australia as International Faculty on 12-23 December 2016.

• National conference on processing & characterization of materials (NCPCM 2016) on 9-10 December 2016 , Convener was Prof. D. Chaira (conference proceedings has been published in IOP-Conference series: Materials Science & Engineering, vol. 178, 2017).

Participated:• 23rd International Symposium on Metastable, Amorphous and Nanostructured Materials organized by WPI Advanced Institute

for Materials Research, Tohoku University, Sendai, Japan, Nara Kasugano International Forum, Nara-city, Japan, 3rd-8th July, 2016. Attended by Prof. D. Chaira, S. K. Kraka and A. Patra.

• 2016 MRS Fall Meeting & Exhibit November 27th – December 2nd , 2016, Hynes Convention Center, Boston, Massachusetts. Title: Effect of Sonication on the Exfoliation of Graphite Nanoplatelets by Prof. S. N. Alam.

• International Conference AMPT 2016 at Kuala Lumpur, Malaysia from 08 – 11 November 2016. By Prof. K Dutta.

• 4th International Conference on Advances in Materials and Materials Processing (iCAMMPiv) IIT Kharagpur 5th to 7th November, 2016, by Prof. A. Basu.

• NMD-ATM 2007, IIT Kanpur 11th to 14th November, 2016, by Prof. A. Basu.

• 3rd International Congress on Advanced Materials (AM2016)” held during November 27-30, 2016 at Bangkok, Thailand, by Prof. S. Pal and R. K. Prusty.


160



Mechanical Properties of Titanium and its Alloys from their Textural Aspects

CSIR Prof. S. K. Sahoo and S. C. Mishra

11 Jun 2016 May 2019

Formability Analysis of Magnesium AZ31 Alloy Sheets during the Incremental Forming Process.

SERB Prof. D. Nagarajan

12.1 Jun 2017 May 2020

Investigations on ratcheting and ratcheting- fatigue interaction behaviour of an aluminium alloy

SERB Prof. K. Dutta 15.83 July 2014 Dec 2017

Fabrication of Ti-TiC metal matrix composite from waste Ti chips

CSIR Prof. Debasis Chaira

10 July 2016 June 2019

Characterization and numerical simulation of brazed joint - ceramic ring of HVB (High Voltage Bushing)

BRFST Prof. S.K.Karak 25 August 2016 March 2018

Development of Zirconium Based Alloys by Mechanical Alloying

DST Prof. S.K.Karak 14 May 2015 March 2018

Investigation of solidification process and prediction of microstructure during secondary cooling in continuous casting of plain carbon steel to estimate the porosity fraction and carbon segregated by multi scale simulation (cellular automata and phase field modeling techniques)

DST Prof. S. Pal and A. Basu

12.2 June 2017 May 2020

Effect Of Hygrothermal Conditioning and Cycling on CNTEmbedded GFRP Composite: A Study on Marine EnvironmentDurability

Naval Research Board (DRDO),

India

Prof. R. K. Prusty and B.C. Ray

11.88 November, 2016

November, 2019

The effect of shock wave, moisture and sea water on de-bonding of multilayer in FRP composite systems -Experimental and multi-scale modeling based investigation

Naval Research Board (NRB),

DRDO, Government of India

Prof. S. Pal 19.93 April 2016 April 2019

CONSULTANCY SERVICESSponsors Address Title of the Project Faculty NameTata Steel A study of FRP (focus on Carbon, Glass and polymer fibre reinforcements)

composites for structural applications in modern India: Feasibilities and opportunities

PI: B. C. Ray and R. K. Prusty


161






Suryakanta Panda Recrystallization texture in HCP metals Prof. S. K. Sahoo and S. C. Mishra

Subhrasmita Tripathy Effect of pre-strain and pre-corrosion on ratcheting behavior of ASTM A668 class D steel

Prof. K Dutta and A. K. Mondal

Susanta Kumar Swain Property Development in As-Cast Heavy Section SG Iron Castings by Alloying with Nickel and Copper

Prof. S. Sen.

Pankajini Sahani Fabrication of SiC-B4C-Al and SiC-B4C-Si cermets by powder metallurgy route

Prof. Debasis Chaira

Shashanka R Fabrication of nano-structured of ferritic and austenitic stainless steel by planetary milling followed by consolidation

Prof. Debasis Chaira

Sumanta Kumar Sahoo

Electrochemically controlled synthesis of few-layer graphene nanosheets and its evaluation for applications

Prof. A. Mallik

Mohan N Development of Nano-TiO2/Y2O3 dispersed Zrirconium alloys by Mechanical alloying followed by Conventional and Spark Plasma Sintering

Prof. A. Basu and S. K. Karak

Himanshu Sekhar Moharana

Surface Modification of Copper by Electro-codeposition Prof. A. Basu

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENTName of the Student Title of Thesis SupervisorShaik Shama Comparison of Mechanical Properties of Austenitic Ductile Cast Iron with

Ferritic/Pearlitic Ductile Cast Iron.Prof. S .Sen

Sambaraj Sravan Kumar

Development of Nano-oxide Dispersed Austenitic Stainless Steels by Mechanical Alloying followed by Conventional Sintering and Spark Plasma Sintering

Prof. S. K. Karak

Deepankar Panda Development of Al-Fe3Al Composites by Powder Metallurgy Route Prof. S. N. Alam and P. Mahanandia


162

Department of MINING ENGINEERING


265 | P a g e





36

14

8

4

0

5

10

15

20

25

30

35

40

B.Tech. M.Tech (2 Years) M.Tech. Dual (5 Years) Ph.D.

136

22

45

0

20

40

60

80

100

120

140

160

B.Tech. M.Tech. (2 Years) M.Tech. Dual (5 Years)

6

21 1

2

4

1 1

9

0123456789

10

Coal India Limited(CIL)

L&T Construction Tata Steel Tredence Analytics Vedanta (HZL)


265 | P a g e





36

14

8

4

0

5

10

15

20

25

30

35

40


136

22

45

0

20

40

60

80

100

120

140

160


6

21 1

2

4

1 1

9

0123456789

10




265 | P a g e





36

14

8

4

0

5

10

15

20

25

30

35

40


136

22

45

0

20

40

60

80

100

120

140

160


6

21 1

2

4

1 1

9

0123456789

10




163

FACULTYSL.No. Name & Specialization

1. Prof. Debi Prasad Tripathy ([email protected])Professor & Head, Ph.D.(ISM, Dhanbad)Mining Environment & Safety Engg., Environmental Pollution Monitoring & Control, Mine Planning, Mine Economics

2. Prof. Bhatu Kumar Pal ([email protected])Professor, Ph.D. (IIT, Kharagpur)Mine Environmental Engineering, EIA, EMP, Opencast Mining & Mine Economics

3. Prof. Singam Jayanthu ([email protected])Professor, Ph.D.(BHU)Mine Planning & Design, EMP, Mine Closure Planning, Coal Mining Methods, Support Design, Ground Control and Rock Mechanics

4. Prof. Hrushikesh Naik ([email protected])Associate Professor & HOD, Ph.D. (NIT Rourkela) Opencast Mining, Mine Surveying, Fly ash Management & Utilization

5. Prof. Manoj Kumar Mishra ([email protected])Associate Professor, Ph.D. (IIT, Kharagpur)Rock Mechanics, Fly Ash Management & Utilization

6. Prof. Himanshu Bhushan Sahu ([email protected])Associate Professor, Ph.D.(ISM, Dhanbad)Mine Environment and Safety Engineering, EIA, Environmental Management in Mining, Spontaneous Heating of Coal, Solid Fuels and Clean Coal Technology

7. Prof. Devidas Sahebraoji Nimaje ([email protected])Assistant Professor, M.Tech.(IIT, Kharagpur)Coal Mine Fires, Mine Environment and Safety

8. Prof Amit K Gorai ([email protected])Assistant Professor, Ph.D. (ISM, Dhanbad)Environmental Engineering, Mine System Engineering, Soft Computing Modeling

PUBLICATION

Publications in Int./National Journals• Nimaje D. S. and Tripathy, D. P. (2016). Characterization of some Indian coals to assess their liability to spontaneous

combustion, Fuel, 163, pp. 139-147, Cited by 15.

• Nimaje D. S. and Tripathy, D. P. (2017). “Fire risk assessment of some Indian coals using Radial Basis Function (RBF) technique”, J. Inst. Eng. India Ser. D, Springer, 98 (1), pp. 49-58, Cited by 2.

• Tripathy, D.P. and Reddy, K.G.R. (2016). “Novel methods for separation of gangue from limestone using multispectral and joint texture features”, IEID & Springer.

• Tripathy, D.P. and Reddy, K.G.R. (2016) “Development of database for accident analysis in Indian mines.” Journal of The Institution of Engineers (India): Series D, 97(2), pp.263-268.

• Tripathy, D.P. and Reddy, K.G.R. (2017). “Multispectral and joint colour-texture feature extraction for ore-gangue separation”, Pattern Recognition and Image Analysis, Springer, Vol. 27, No. 2, pp. 338–348.

• Gorai, A.K., Biswal, S.S., Mitra, G. (2017). Effects of meteorology on ground-level ozone (GLO) concentrations and identifying the hot spots having significantly higher GLO concentration in a semi-urban area. Environmental Development and Sustainability. DOI 10.1007/s10668-017-9947-3.

• Gorai, A.K., Tchounwou, P.B., Mitra, G. (2017). Spatial variation of ground level ozone concentrations and its health impacts in an urban area in India. Aerosol & Air Quality Research. 17: 951–964. doi: 10.4209/aaqr.2016.08.0374.

• Patel, A.K., Chatterjee, S., Gorai, A. K. (2017). Development of machine vision-based ore classification model using support vector machine (SVM) algorithm. Arabian Journal of Geosciences, 10:107. DOI 10.1007/s12517-017-2909-0.

• Gorai, A.K., Mitra, G. (2016). A comparative study of the feed forward back propagation (FFBP) and layer recurrent (LR) neural network model for forecasting ground level ozone concentration. Air Quality, Atmosphere & Health. 10(2): 213-223. DOI 10.1007/s11869-016-0417-0.

• Gorai, A. K., Kumar, P., Patel, A.K. (2017). Reliability analysis of the main conveyor system in underground coal mine to determine the maintenance schedules. International Journal of Mining and Mineral Engineering 8(3): 207-233.


164

• Ojha, S., Pal, B. K. and Biswal, B. B. (2016): Methodologies for operational improvement in coal handling plant – a theoretical review, International Journal of Engineering, Technologies and Management Research, Vol. 3, Issue 2, pp. 22-30.

• Mohanty, M. M. and Pal, B. K. (2017): Sorption behavior of coal for implication in coal bed methane -- an overview, International Journal of Mining Science and Technology, Vol 27, pp. 307-314.

• Goswami, A., M.K. Mishra, and D. Patra. (2017). ‘Investigation of general regression neural network architecture for grade estimation of an Indian Iron Ore deposit’, Arabian Jour. of Geoscience, Springer Publ., Volume 8, Issue 6, pp 3713-3726.

• Behera, B. and Sahu, H. B. (2016). Experimental evaluation of susceptibility to spontaneous heating of some Indian coals, Minetech, Vol. 37, No. 3, Pp 41-50.

• Ranjan, A., Sahu, H.B. and Misra, P. (2016). Wireless sensor networks: An emerging solution for underground mines, International Journal of Applied Evolutionary Computation, Vol. 7, No.4, Oct-Dec, Pp.1-27.

• Swan, A., Patnaik, N., Bepari, M. and Sahu, H. B. (2017). Development of a wireless particulate monitoring system for mines, Geominetech: The Indian Mineral Industry Journal, Pp. 23-27.

• Dash, S. and Sahu H. B. (2017). Impact of iron and manganese mining on the ambient air quality in Koira mining region, Geominetech: The Indian Mineral Industry Journal, pp. xxi-xxiii.

• Singam Jayanthu, Instrumentation and field measurements in rock engineering- vis-à-vis case studies and scope of trans-disciplinary research Published in The Indian Mining Engineering Journal (IMEJ), Pg.5-10, volume-54 No.9, ISSN 0019-5944, November-2016

• Singam Jayanthu, Guntha Karthik and Bhushan N Patil, Development of wireless data acquisition system for transmission of slope monitoring data using Arduino and XBEE, Mining Engineers Journal, Vol. 18, pp-14-18,No. 7, February 2017

• Singam Jayanthu, Rammohan Perumalla, Soft computing techniques for major roof falls in bord and pillar in underground coal mines using Mamdani fuzzy model, International Journal of advanced research in science and engineering, Vol.5, Issue No9, pp-172-180, 2016.

• Prashanth Ragam , Singam Jayanthu , Guntha Karthik, Wireless sensor network for monitoring of blast-induced ground vibration, International Journal of Electrical and Electronics Engineers(IJEEE), ISSN(O)-2321-205 ISSN(P)-2321-2047, Vol.8, pp-341-348, 2016

• Sukanth T, Singam Jayanthu, Jayalaxmi, 2016, Power quality improvement in underground mining using DSTATCOM, International Journal of Electrical and Electronics Engineers (IJEEE), ISSN (O)-2321-205 ISSN (P)-2321-2047, Vol.8, pp-334-340, 2016.

• Guntha Karthik , Singam Jayanthu , Bhushan N Patil , R. Prashanth, Laboratory and field investigations on XBEE module and its effectiveness for transmission of slope monitoring data in mines, International Journal of Electrical and Electronics Engineers (IJEEE, ISSN(O)-2321-205 ISSN(P)-2321-2047 Vol.8 pp-349-355, 2016

Publications in Conferences• B. K. Tirkey and D. S. Nimaje, “Prediction of mine water pH using ANN modelling”, SMP-2016, NIT Rourkela, 2016, pp.

151-161.

• Patel, A.K., Chatterjee, S., Gorai, A. K., Development of online machine vision system using Support Vector Regression (SVR) algorithm for grade prediction of iron ores. The Fifteenth International Conference on Machine Vision Applications (MVA-2017), May 8-12, 2017. Nagoya University, Nagoya, Japan. pp. 149-152, IEEE. doi. 10.23919/MVA.2017.7986823.

• Patel, A.K., Chatterjee, S., Gorai, A. K., Optimising the image features for development of machine vision system for classification of iron ores using support vector machine algorithm”. National Conference on Sustainable Mining Practices, SMP-2016, December 2-3, 2016, NIT Rourkela, Odisha, India.

• Patel, A.K., Chatterjee, S., Gorai, A. K., 2016. Development of machine vision-based system for iron ore grade prediction using Gaussian Process Regression (GPR). Thirteenth International Conference on Pattern Recognition and Information Processing (PRIP’2016), October 3-5, 2016, Minsk, Belarus.

• Ala, C.K., & Tripathy, D.P. (2016). A novel methodology for risk assessment in underground coal mines, In Proceedings of Risk and Resilience Mining Solutions, Vancouver, Canada, 14-16 Nov, 2016. pp. 91-116.

• Nanda, S.K., Tripathy, D.P. & Mohapatra, S.S. (2016), Development of fuzzy logic based accident alarming system for opencast mines, ACCET-2016, Ist Int. Conf. on Adv. Of Computer Comm. and Electrical Tech., Murshidabad, 21-22/10/2016, CRC Press and Balkema, pp. 104-110.

• Ranjan, A., Misra, P., Sahu, H.B., On the importance of link characterization for wireless sensor networks in underground mines, 9th International Conference on Communication Systems and Networks, COMSNETS 2017, 7945456, pp. 576-577.

• Ranjan, A., Misra, P., Sahu, H.B., Experimental measurements and channel modeling for wireless communication networks in underground mine environments, 2017, 11th European Conference on Antennas and Propagation, EUCAP 2017, 7928854, pp. 1345-1349.


165

• Ranjan, A., Sahu, H.B., Misra, P., Wave propagation model for wireless communication in underground mines, 2016, 2015 IEEE Bombay Section Symposium: Frontiers of Technology: Fueling Prosperity of Planet and People, IBSS 2015.

• Pradhan, D.S, Sahu H. B and Sahoo, B., 2017, Study of surface runoff from opencast mines in the Ib valley river basin, Odisha. Proc. of Int. Conf. on Deep Excavation, Energy Resources and Production. Dept. of Mining Engineering, IIT Kharagpur, 24th-26th Jan 2017. Pp. 1-9.

• Sahoo, B., Sahu, H. B. and Pradhan, D. S., 2017, Geotechnical and geochemical characterization of coal mine waste for environmental restoration of opencast mines, Proc. of Int. Conf. on NexGen Technologies for Mining and Fuel Industries, CSIR-CIMFR, New Delhi, Feb 15-17, Vol. II. P 967-973.

• Singam Jayanthu,Guntha Karthik and Dulal Acharya, Development of wireless data acquisition system using Arduino and XBee for transmission of slope monitoring data in oopencast mines, 5thInternational Conference on Computing, Communication and Sensor Networks (CCSN 2016), 24-25 December 2016, Kolkata, India.pp.138-138.Volume. II, ISBN: 81-85824-46-0.

• Singam Jayanthu, Guntha Karthik,Development of Effective technology for online slope monitoring in opencast mines – R&D initiative,Workshop on Emerging Mining Technologies and Low-Carbon Footprints with Waste Management Vigyan Bhawan, New Delhi, during 13-14 February 2017.

• Jayanthu Singam, Recent advances in testing and field investigations on stability of fly ash as back filling material in opencast mines, International Conference on Recent Advances in Rock Engineering (RARE-2016)16-18 November 2016, Bengaluru pp.301-306.

• Singam Jayanthu, Guntha Karthik, Evaluation of stability of cut slopes in open cast metal mines vis-à-vis field monitoring through total station – Case study, All India Mine Surveyors’ Meet,12-13 May 2017.

• Singam Jayanthu and Simantini Behera, Application of surveying and leveling in opencast mines for assessment of stability in dump slope- a case study All India Mine Surveyors’ Meet, 12-13 May 2017.

• Singam Jayanthu, and Guntha Karthik , Recent research works on detection and estimation of slope behaviour in opencast mines – application of TDR and WSN systems , International conference on Communication Devices and Networking (ICCDN) 2017, Sikkim Manipal Institute of Technology, Sikkim, 3-4th June, 2017.

• Singam Jayanthu, Guntha Karthik and Lakshi Prasad Roy, Innovative technologies for slope stability monitoring in opencast mines – vis-à-vis synthetic aperture and cable based radar, Workshop on Radar Technology For Slope Stability Monitoring, Kolkata-23-24 May 2017.

• Guntha Karthik and S.Jayanthu, Quantification of slope movement using time domain reflectometry - an experimental trial, International Conference on “Deep Excavations, Energy resources & Production (DEEP16)” , 24-26 January 2017, Kharagpur.

• S. Jayanthu, Instrumentation and field measurements to understand strata behavior in deep underground coal mines – a case study, International Conference on Deep Excavations, Energy resources & Production (DEEP16, 24-26 January 2017, Kharagpur.

• Singam Jayanthu & R Prashanth, Safety and environmental issues in utilization of fly ash for back filling in open cast mines, National Conference on Sustainable Mining Practices (SMP – 2016) (December 2-3, 2016), NIT-Rourkela.

• Guntha Karthik, Singam Jayanthu, Received signal strength index (RSSI) of XBEE communication module in laboratory and opencast mines –a case study, National Conference on Sustainable Mining Practices (SMP – 2016) December 2-3, 2016, NIT-Rourkela.

• Singam Jayanthu and R. Prashanth, Safety and environmental issues in utilization of fly ash for back filling in opencast mines, National Conference on Health, Safety & Environment Issues In Mining, Jodhpur,19th Dec, 2016.

• Singam Jayanthu, NexGen technology for estimation of in-situ stress in rock mass vis-à-vis application of hydrofracturing techniques in Indian sites, International Conference on NexGen Technologies for Mining and Fuel Industries, 15-17 February 2017 at New Delhi Organized by CSIR-CIMFR-Dhanbad, ISBN 978-93-85926-40-2. pp-109-116.

• T.Sukanth, Singam Jayanthu, Mitigation of power quality problem in underground mine using different control strategies, International Conference on Humanitarian Technology Conference (R10-HTC), 2016 IEEE Region 10, UP chapter, organized by Dayalbagh Educational Institute, Dayalbagh, Dec 21-23, 2017, Agra, India.

• T. Sukanth, Singam Jayanthu. Improvement of voltage in underground mining using PI controller, 3rd International conference on Innovative Engineering Technologies (ICIET’2016) August 5-6, 2016, Bangkok.


166

Paper Accepted for Publication• D.P.Tripathy & D.S.Rao “Noise mapping of a highly mechanised coal mine using measured noise and GPS data”, International

Journal of Earth Sciences &Engineering (IJESE), 2017 in press.

• D.P.Tripathy & D.S.Rao, “Occupational noise induced hearing loss of workers in a bauxite mine in India”, Noise Control Engineering Journal, USA, 2017, in press.

• Sahoo, M. M. and Pal, B. K. (2017): Geological modeling of a deposit and application using SURPAC, Journal of Mines, Metals & Fuels (In Press).

• Dani Varghese and Pal, B. K. (2017): The change in climate variability and relation to change in local climate, Journal Weather (In Press).

• Pasayat, Rahul, Pal, Jiten Kr and Pal, B. K. (2016): Investigation on assessment of water quality monitoring of some opencast mines in India, International Journal on Environmental Management (accepted).

• Sahu, H. B. and Tibrewal, K., Greenhouse gas inventory for mines: An urge to develop clean technology, Journal of Mines, Metals and Fuels.

• Behera, B. and Sahu, H.B., Assessment of auto-oxidation potential of some Indian coals by differential thermal analysis (DTA) technique”. Journal of Mines, Metals and Fuels.

• Ranjan, A., Misra, P., Dwivedi, B., Sahu, H.B., Studies on propagation characteristics of radio waves for wireless networks in underground coal mines, Wireless Personal Communications, pp. 1-14, Springer.

Books / Book Chapter• Tripathy D.P. & Dash, T.R. (2017), Mine Closure Planning: Legislative Framework and Environmental Management, Sustainable

Mining Practices. Ed. Dr.A K Gorai & Dr.D.S.Nimaje, Narosa Publication, ISBN 978-81-8487-604-8.

• Tripathy D.P. (2017), Legislative Framework for Solid Waste Management in India and USA, Ed. Dr. D. Sengupta, Springer.

• Revised Version of Book ‘A Complete Guide for Mining Engineers’ by A. K. Gorai(ISBN: 978-81-7956-120-1) Lovely Prakashan, Dhanbad (In Press).

• Sustainable Mining Practices, Narosa Publisher, New Delhi by A.K.Gorai & D.S. Nimaje (ISBN: 978-81-8487-604-8. (In Press).

Patent: Nil


By Faculty: • Prof. H. K. Naik is the Member, Board of Governors, NIT, Rourkela.

• Prof. H. B. Sahu is awarded with Smt. Bala Tandon award by Mining, Geology and Metallurgical Institute of India (MGMI) for the contribution towards Management of Environment in Mines for the year 2015-16.

• Prof. D.P.Tripathy, selected as Editor-in-Chief, Journal of Geology and Mining Research, ISSN: 2006 -9766.

• Prof. D.P.Tripathy and K.G.R.Reddy (2016): Certificate received for the Best Paper award in AMSCO 2016.

By Students: Shri K.G.R.Reddy received Best Research Scholar in Mining Engg. in Research Scholars’ week, 2017 at NIT, Rourkela.


Prof. S. Jayanthu• Member of Technical Committee related to Environmental appraisal of Mining Industries of Orissa State Pollution Control

Board (OSPCB).

• Fellow of Institution of Engineers (India).

• Editor-in- Chief for Indian Mining and engineering Journal.

• Editorial board member of Psychology and Behavioral Sciences, Science Publishing Group.

• Editorial Board Member of International Journal of Advanced Computer Research (IJACR) ISSN: (Print):2249-7277, ISSN: (Online):2277–7970. International Journal of Advanced Computer Research (IJACR).

• Member of Board of Studies (BOS) for Mining Engg. discipline of Kakatiya University, Warangal and Jawaharlal Nehru Technological University, Manthani, MREC-Hyderabad.

• Member of Curriculum Development/Audit Committee. NIT – Raipur.


167

Prof. D.P.Tripathy, selected as Editor-in-Chief, Journal of Geology and Mining Research, ISSN: 2006 -9766.

Prof. D.S. Nimaje: MMGI Life Membership No: 10725.

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERSSl. No.

Faculty Topic Venue

1 Dr. Amit K. Gorai & Dr. D. S. Nimaje

Sustainable Mining Practices SMP-16 NIT Rourkela, 02-03 December, 2016

2 Prof. D. P. Tripathy Solid Waste Management in Indian Cities- Issues and concerns' to be organized by Civil Engineering Department

Guru Nanak Dev Engineering College, Ludhiana, 23-27 August, 2016.

3 Prof. M K Mishra Rock Mechanics with Ground Control Applications Jan 17-19, 2017NIT Rourkela

4 Prof. S. Jayanthu All India Mine Surveyors Meet 12-13 May 2017 Hyderabad5 Prof. S. Jayanthu Advanced Technologies for Slope Stability

Monitoring in Opencast MinesShort term course on Slope Stability Issues in Mining and Civil Engg.

28th-30th September 2016 at NIT, Rourkela

6 Prof. S. Jayanthu 5thInternational Conference on Computing, Communication and Sensor Networks (CCSN 2016)

24-25 December 2016, Kolkata, India.

7 Prof. S. Jayanthu International Conference on Communication Devices and Networking (ICCDN) 2017,

3-4th June, 2017, Sikkim Manipal Institute of Technology, Sikkim

8 Prof. S. Jayanthu Workshop on Radar Technology For Slope Stability Monitoring

23-24 May 2017 Kolkata

9 Prof. S. Jayanthu Impact of ground vibration and air blast on safety of structures and control measures

PESO/Gulf–Oil-IDLI/NMDC - at Noamundi, 24th August 2016

10 Prof. S. Jayanthu Safe Practices in Blasting & Handling of Explosives Training

22nd to 24th Dec’16 at Kirandul complex of NMDC Ltd

11 Prof. S. Jayanthu Advanced Technologies for Slope Stability Monitoring in Opencast Mines vis a vis Numerical Modelling

12.6.17, SCCL Corporate Office, HQ, Kothagudem

12 Prof. S. Jayanthu Recent Trends in Design And Monitoring Of Slopes in Opencast Mines

M/s SCCL Mines, Yellandu


168




Geostatistical analysis and mapping of ground level ozone in an urban area in India: a case study of Ranchi city

DST Dr. A.K.Gorai 20.30 23-12-2014 6-11-2016

Construction of quick setting stopping in case of fire in underground mine using expansion foaming agent.

COAL (S&T) Ministry of Coal

Dr. B. K. Pal (PI) and Mr. JuzerBhainia (Trans

Marketing, Co-PI

51.30 2011 Progress Report

Submitted

Estimation and simulation of gas permeability as well as stress – strain behaviour of Indian coal seam for CBM production and CO2 sequestration at in-situ conditions

DST Dr. M. K. Mishra 39.13 02-2015 01-2018

Scientific study on Slope Stability of Over Burden Dump along with 15% , and 30% fly ash and field monitoring of Stability of dump at Bhupalapalli Opencast mine, SCCL

Centre for Fly Ash Research

& Management (C-FARM)

Dr. S. JayanthuProf. G. V. N

Reddy, Associate Professor, Civil Engg, JNTU)

6.65 2014-2 years study(Extended by

CFARM because of non-availability of Pond Ash for

Field Trial)

In progress

Development of TDR based wireless system for slope stability monitoring in opencast mines

Minsitry of Mines Dr. S. Jayanthu 26.2 1-1-2015, 3 years

Under Progress1-1-2018


SECL Slope stability studies at SECL mine Dr. D.P. Tripathy

OMC, Bhubaneswar Blasting investigation on ground Dr. M.K. Mishra

MCL, Sambalpur Study of surface runoff for 15 opencast mines of MCL and preparation of management plan

H. B. Sahu, Sk Md Equeenuddin, N. Prakash, R. K. Patel

Tata Steel Ltd. Scientific study of drainage pattern and management of surface runoff at Sukinda chromite mine

H. B. Sahu, Sk Md Equeenuddin, N. Prakash

Utkal Alumina International Ltd

Technical Study of surface and ground water management at Baphlimali bauxite mine

H. B. Sahu, Sk Md Equeenuddin, N. Prakash

Odisha Mining Corporation

Scientific study of drainage pattern and management of surface runoff at South Kaliapani mine

H. B. Sahu, Sk Md Equeenuddin, S. K. Das

Technoblast Mining Corporation Ltd, Raigarh

Study of washability characteristics of coals from Gare Palma IV/8 coal block, Tamnar area, Raigarh, Chhattisgarh

H. B. SahuR. K. Patel

Odisha Mining Corporation

Scientific study on rain water harvesting and recharging of ground water in five opencast mines of Odisha Mining Corporation

H. B. Sahu, Sk Md Equeenuddin, S. K. Das

MOIL Slope stability studies and monitoring by suitable instrument at Dongri Buzurg mine, MOIL

Dr. S. Jayanthu

FACOR Scientific study on ground movement observation for two dumps at Ostapal Chromite mine, M/s FACOR Ltd

Dr. S. Jayanthu


169

Sponsors Address Title of the Project Faculty Name

SECL Scientific study on strata control investigations to determine the behavior of strata during extraction of depillaring panel 122 LW of Churcha Mine East, SECL.

Dr. S. Jayanthu, Prof. L. P. Roy-ECE, and Prof P M Khilar -CSE

SCCL Scientific Study on roof behaviour through underground instrumentation and monitoring of goaf atmosphere for the proposed Blasting gallery Panels of No 3 seam at GDK11 incline-RG-1 Area, SCCL

Dr. S. Jayanthu and Prof. L. P. Roy-ECE

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCEName of the Project Sponsoring Agency Coordinator Total Value(Rs. in


FIST DST HOD(Mn) 165.00 Nov 2014 Oct 2019


1 Cyclic Loading Unit 66.00

LIST OF LABORATORIES :Sl. No. Name of the Laboratories1 Sponcom Lab2 Computer Lab3 Material Handling System Lab 4 Mine Environmental Engineering Lab5 Survey Lab5 Rock mechanics Lab7 Geo-mechanics Lab8 Water Quality Lab

PH.D. DEGREES AWARDED BY THE DEPARTMENT:

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENT: Name of the Student Title of Thesis Supervisor

Dhruti Sundar Pradhan Assessment of impact of surface run off from opencast coal mines in Ib Valley Basin and its management

Dr. H. B. Sahu


170

Department of PLANNING & ARCHITECTURE


278 | P a g e




FACULTY

SL Name & Specialization1 Dr. Basudatta Sarkar

Architecture and Regional Planning2 Dr. Arjun Mukerji

History and Theory of Architecture3 Dr. Tuhin Subhra Maparu

Urban and Regional Planning4 Simantini Behera

Pavement materials, City Planning, Surveying5 Binit Kumar

Energy Efficient Architecture and Urban Planning6 Dr. K. Tungnung

Passive design with Affordances, low-energy modern architecture, climate &

17

10

2

4

6

8

10

12

14

16

18

B.Arch. Ph.D.

88

0

20

40

60

80

100

B.Arch.


278 | P a g e




FACULTY

SL Name & Specialization1 Dr. Basudatta Sarkar

Architecture and Regional Planning2 Dr. Arjun Mukerji

History and Theory of Architecture3 Dr. Tuhin Subhra Maparu

Urban and Regional Planning4 Simantini Behera

Pavement materials, City Planning, Surveying5 Binit Kumar

Energy Efficient Architecture and Urban Planning6 Dr. K. Tungnung

Passive design with Affordances, low-energy modern architecture, climate &

17

10

2

4

6

8

10

12

14

16

18

B.Arch. Ph.D.

88

0

20

40

60

80

100

B.Arch.


1 Dr. Basudatta SarkarArchitecture and Regional Planning

2 Dr. Arjun Mukerji History and Theory of Architecture

3 Dr. Tuhin Subhra Maparu Urban and Regional Planning

4 Simantini BeheraPavement materials, City Planning, Surveying

5 Binit Kumar Energy Efficient Architecture and Urban Planning

6 Dr. K. TungnungPassive design with Affordances, low-energy modern architecture, climate & environment, thermal comfort, adaptive methods

7 Tirthankar SarkarArchitecture, Transportation and infrastructure Planning

8 Nabanita SahaUrban Planning, Global Cities

9 Dr. Dibya Jivan PatiArchitecture, Low-cost Housing, City Planning, Solid Waste Management


171

PUBLICATION

Publications in Journals• Maparu, Tuhin Subhra; Mazumder, Tarak Nath, 2017. Transport infrastructure, economic development and urbanization in

India (1990-2011): Is there any causal relationship? Transportation Research Part A-Policy and Practice, 100 (11), 319-336.

Publications in Conferences• Singham J., Behera S., 2017. Application of Surveying and Levelling in Opencast Mines for Assessment of Stability in Dump

Slope- A Case Study. Proceedings of All India Mine Surveyors’ Meet.

• Sarkar B., Banerji H., Sen J., 2016. Assessment of Socio-economic Vulnerability using select Indicators. 52nd Annual Congress of International Society of City and regional Planners (ISOCARP).

• Maparu, Tuhin Subhra, & Mazumder, Tarak Nath, 2016. Exploring the relationship between transport infrastructure and economic development in India (1991-2011): A panel cointegration and causality test approach. 14th World Conference on Transport Research, Tongji University, Shanghai.

Paper Accepted for Publication Conferences:• Sarkar B., Banerji H., 2017. Smart Strategies for Inclusive Development on Informal Settlements in India. 53rd Annual

Congress of International Society of City and regional Planners (ISOCARP). Paper accepted on June 16, 2017 for poster presentation.

• Sarkar B., 2017. The Impact of Cultural Identity and Place Identity on City Form: The Case of Kolkata. Spaces and Flows: Eighth International Conference on Urban and extra Urban Studies. Paper accepted on May 21, 2017 for oral presentation.

• Tungnung K., Kodama Y., Krishnan A., 2017. Passive design with Affordances: ‘Natural Ventilation and Adaptive Shading for Comfort, Churachandpur’. PLEA 2017 Conference. Paper accepted on April 26, 2017.


Patent


By Faculty:• Dr. Tuhin Subhra Maparu has been awarded Doctor of Philosophy by Indian Institute of Technology Kharagpur on May, 2017.

• Dr. Arjun Mukerji has been awarded Doctor of Philosophy by Indian Institute of Technology Kharagpur on July, 2016.

By Students: • Namratha B.S. and Jay Bihani received Special Mention in IGBC Green design Competition.


Faculty members:Dr. Basudatta Sarkar Registered with Council of Architecture, India

Dr. Tuhin Subhra Maparu Registered with Council of Architecture, India, Associate of Institute of Town Planners, India (AITP)

Dr. Arjun Mukerji Registered with Council of Architecture

Dr. K.L.L. Tungnung Registered with Council of Architecture

Dr. Dibya Jivan Pati Registered with Council of Architecture

Binit Kumar Registered with Council of Architecture

Tirthankar Sarkar Registered with Council of Architecture

Nabanita Saha Registered with Council of Architecture

Students: Society of Students of Planning and Architecture (SSPA): Batch of 2016-17.


172


Seminars conducted by the Department:• Title: Exploring the relationship between transport infrastructure and economic development in India Speaker: Prof. Tuhin Subhra Maparu (Faculty member) Date: 27 Jul 2016.

• Title: Analogic Approaches to Design Speaker: Dr. Arjun Mukerji (Faculty member) Date: 04 Aug 2016.

• Title: Universal Design: from theories to practice Speaker: Dr. Haimanti Banerji, Associate professor, Department of Architecture and Regional Planning, IIT Kharagpur

(External Academic) Date: 03 Sep 2016.

• Title: Incorporation of Hindu Theology and Vedic Philosophy in Hindu Temples Speaker: Prof. Abir Bandyopadhyay, Head, Department of Architecture, NIT Raipur (External Academic) Date: 23 Oct 2016.

• Title: Assessment of Socio-economic Vulnerability with Select Indicators Speaker: Dr. Basudatta Sarkar (Faculty member) Date: 15 Feb 2017.

Participation of faculty members in workshops/symposia: • Dr. Tuhin Subhra Maparu 14th World Conference on Transport Research, Tongji University, Shanghai, 10-15 July, 2016.

• Dr. Basudatta Sarkar 52nd Annual Congress of International Society of City and Regional Planners (ISOCARP), Durban, 12th -16th September,

2016.

• Dr. Dibya Jivan Pati Hands-on Workshop on Ferro-cement, Auroville Earth Institute, Auroville, 5th - 10th June, 2017

RESEARCH PROJECTS: None

Name of the Project Sponsoring Agency Name of the PI Total Value (Rs. in Lakhs)



173

CONSULTANCY SERVICES: Sponsors Address Title of the Project Faculty Name

INSTITUTIONAL PROGRAMME SUPPORT / CENTRE OF EXCELLENCE: Name of the Project Sponsoring Agency Name of the



EQUIPMENT ACQUIRED: Sl. No. Name of the Equipment Amount (Rs. in Lakhs)

LIST OF LABORATORIES: SL Name of the Laboratories1 Computer Laboratory

2 Building Energy Laboratory

3 Material Laboratory

PH.D. DEGREES AWARDED BY THE DEPARTMENT: Name of the Student Title of Thesis Supervisor

M.TECH. RESEARCH DEGREES AWARDED BY THE DEPARTMENT: Name of the Student Title of Thesis Supervisor


174

Department of PHYSICS & ASTRONOMY


283 | P a g e





28

14

1

18

0

5

10

15

20

25

30

M.Sc. (2 Years) Int. M.Sc. (5 Years) M.Tech.(Res.) Ph.D.

48

102

0

20

40

60

80

100

120

M.Sc. (2 Years) Int. M.Sc. ( 5 Years)

2

1 1 1

0

0.5

1

1.5

2

2.5

Aakash Institute Chinmaya Vidyalaya Mu Sigma TCS


283 | P a g e





28

14

1

18

0

5

10

15

20

25

30


48

102

0

20

40

60

80

100

120


2

1 1 1

0

0.5

1

1.5

2

2.5



283 | P a g e





28

14

1

18

0

5

10

15

20

25

30


48

102

0

20

40

60

80

100

120


2

1 1 1

0

0.5

1

1.5

2

2.5



175

FACULTYSL Name & Specialization1. Prof. Simanchala Panigrahi ([email protected])

Ph.D. (Berhampur University), Professor Solid State Physics, Material Science, Ferroelectrics

2. Prof. Pawan Kumar ([email protected])Ph.D. (IIT Delhi), Associate Professor Bulk,Specialization:Bulk,Thin and Nano Functional Materials

3. Prof. Dilip Kumar Pradhan ([email protected])Ph.D. (IIT Kharagpur), Assistant Professor Ferroelectrics, Multiferroics,Polymer Electrolyte

4. Prof. Pitamber Mahanandia ([email protected])Ph.D (I.I.Sc. Bangalore), Assistant Professor Carbon Nanotubes, Energy storage Devices, Graphene

5. Prof. Jyoti Prakash Kar ([email protected])Ph.D. (IIT Delhi), Assistant Professor Semiconductors,Thin Electronic Films, High-k Dielectrics, Nanotechnology

6. Prof. Dhrubananda Behera ([email protected])Ph.D. (Utkal University), Associate Professor Superconductors, Ferrites, Accelerator Based Ion-Matter interaction Studies

7. Prof. Prakash Nath Vishwakarma ([email protected])Ph.D. (I.I.Sc. Bangalore), Assistant Professor Low Temperature Condenser Matter Physics

8. Prof. Anil Kumar Singh ([email protected])Ph.D (JNU), Assistant Professor Multiferroics, Ferroelectrics, Low Temperature Condensed Matter Physics

9. Prof. Suryanarayan Dash ([email protected])Ph.D. (UGC-DAE CSR, Indore), Assistant Professor Magnetism, Multiferroics and Nanomaterials

10. Prof. Sidhartha S. Jena ([email protected])Ph.D. (JNU), Associate Professor Soft Matter, Structure and Dynamics of Gels, Polymers

11. Prof. Dillip Kumar Bisoyi, ([email protected])Ph.D. (Sambalpur University), Associate Professor Polymer Composites, Nano-Biocomposites, Small Angle X-Ray Scattering

12. Prof. Biplab Ganguli ([email protected])Ph.D. (IIT Kanpur), Associate Professor Theoretical Condensed Matter Physics, Computational Material Science

13. Prof. Sasmita Mishra ([email protected])Ph.D. (IIT Mumbai), Assistant Professor Theoretical High Energy Physics

14. Prof. Sanjoy Datta ([email protected])Ph.D. (SINP, Kolkata), Assistant Professor Theoretical Condensed Matter Physics

15. Prof. Amit Rai ([email protected])Ph.D. (Oklahoma State University, USA), Assistant Professor Quantum optics, Quantum computation, Quantum information processing.

16. Prof. Ananta Charan Pradhan ([email protected])PhD (I.I.A, Bangalore), Assistant Professor UV Astronomy, Interstellar Dust & Gas, Galactic Structure, PNe.


176

PUBLICATION

Publications in Journals• S. R. Mohapatra, P. N. Vishwakarma, S. D. Kaushik, R. J. Choudhary, N. Mohapatra, and A. K. Singh, Cobalt substitution

induced magnetodielectric enhancement in multiferroic Bi2Fe4O9, Journal of Applied Physics, 121, 124101 (2017).

• S. Kuila, S. Tiwary, M.R. Sahoo, A. Barik, P.N. Vishwakarma Measurement of temperature dependent magnetoelectricity in BiFe(1-x)CoxO3; x = 0, 0.01, 0.02 Journal of Alloys and Compounds, vol. 709, p. 158 (2017).

• D. K. Pradhan, S. Kumari, V. S. Puli, P. T. Das, D. K. Pradhan, A. Kumar, J. F. Scott and R S. Katiyar, Correlation of dielectric, electrical and magnetic properties near the magnetic phase transition temperature of cobalt zinc ferrite,

• Phys. Chem. Chem. Phys., 19, 210-218 (2017).

• P. Sahu. S N Tripathy, R Pattanayak, R Muduli, N Mohapatra, S Panigrahi,

• Effect of grain size on electric transport and magnetic behavior of strontium exaferrite (SrFe12O19), Appl. Phys. A 123, 3 (2017)

• R. Pattanayak, S. Raut, T. Dash, S. Mohapatra, R. Mududli and S. Panigrahi,

• Investigating the effect of multiple grain–grain interfaces on electric transport behavior of [50 wt% BaFe12O19–50 wt% Na0.5Bi0.5TiO3] magnetoelectric nanocomposite system, Physica B: Condensed Matter 512, 16–25 (2017).

• P. Nayak, T. Badapanda, S. Panigrahi, Investigation of site selectivity of Lanthanum in SrBi4Ti4O15 ceramic by structural, dielectric, ferroelectric and conduction behaviour, Journal of Materials Science: Materials in Electronics, 28, 625 (2017)

• P. Nayak, T. Badapanda, A.K. Singh, S. Panigrahi, Possible relaxation and conduction mechanism in W6+doped SrBi4Ti4O15 ceramic, Ceramics International 43, 4527–4535 (2017).

• K.C. Das, N.Tripathy,S.P.Ghosh, P. Sharma, R. Singhal and J.P.Kar,

• Microstructural, surface and interface properties of zirconium doped HfO2 thin films grown by RF co-sputtering technique, Vacuum, 143, 288-293 (2017).

• K. C. Das, S. P. Ghosh, N. Tripathy, R. Singhal, J. P. Kar,Modulation of microstructure and interface properties of co-sputter derived Hf1-xTixO2 thin films with various Ti content, Journal of Materials Science: Materials in Electronics (Accepted).

• N. Tripathy, K. C. Das, S. P. Ghosh, B. Das, J. P. Kar, Effect of RF sputtering power on morphological and electrical properties of calcium copper titanate thin films, Journal of Materials Science: Materials in Electronics, 28, 2686-2690 (2017).

• N. Tripathy, K. C. Das, S. P. Ghosh, B. Das, P. Kumar, J. P. Kar,

• Investigation of surface and interface properties of RF sputtered calcium copper titanate thin films on silicon substrate,Journal of Materials Science: Materials in Electronics, 28 (2017) 2686-2690.

• P. C. Mahakul, K Sa, B. Das, B. V. R. S. Subramaniam, S Saha, B Moharana, J Raiguru, S Dash, J Mukherjee, and P Mahanandia, Preparation and characterization of PEDOT:PSS/ reduced graphene oxide–carbon nanotubes hybrid composites for transparent electrode applications. J Mater Sci 52, 5696–5707, (2017).

• P. C. Mahakul, Kadambinee Sa, Bamadev Das, P Mahanandi Structural investigation of the enhanced electrical, optical and electrochemical properties of MWCNT incorporated Poly [3-hexylthiophene-2,5-diyl] composites,

• Materials Chemistry and Physics, 199, 477-484 (2017).

• S. Khandai and S. Jena, Transition from Double to Single Diffusive Behaviour with Increase in Polymer Concentration for Oppositely Charged Guest - Host Systems of Green Fluorescent Protein Diffusing inside Poly - L - lysine Solutions, Journal of Colloid and Interface Science, 505, 196 (2017).

• R. Pattanayak, R. Muduli , R. K. Panda, T. Dash P. Sahu S. Raut S. Panigrahi,

• Investigating the effect of multiple grain–grain interfaces on electric and magnetic properties of[50wt%BaFe12O19–50 wt%Na0.5Bi0.5TiO3] composite system, Physics B 485, 67–77 (2016).

• P. Nayak, T. Badapanda, S. Panigrahi, Dielectric and ferroelectric properties of Lanthanum modified SrBi4Ti4O15 ceramics, Materials Letters. 72, 32–35 (2016).

• P. Nayak, T. Badapanda, S. Panigrahi, Dielectric, ferroelectric and conduction behaviour of tungsten modified SrBi4Ti4O15 ceramic, Journal of Materials Science: Materials in Electronics 27, 1217–226 (2016).

• V. Senthil, T. Badapanda., A. Chandra Bose., S. Panigrahi., Relaxation and conduction mechanism of Dy3+ substituted SrBi2Ta2O9 ceramics, Journal of Materials Science: Materials in Electronics 27, 4760-4770, (2016).

• V. Senthil, T. Badapanda., A. Chandra Bose., S. Panigrahi, Enhancement of dielectric and ferroelectric properties of dysprosium substituted SrBi2Ta2O9 ceramics,Journal of Materials Science: Materials in Electronics 27, 1601608, 2016.

• V. Senthil, T. Badapanda, A. Chithambararaj., A. Chandra Bose., S. Panigrahi,


177

• Impedance spectroscopy and photocatalysis water-splitting for hydrogen production with cerium modified SrBi2Ta2O9 ferroelectrics, International Journal of Hydrogen Energy 41, 22856-22865, 2016.

• R. Muduli, P. Kumar, R.K. Panda, S. Panigrahi, Dielectric, Ferroelectric and Impedance Spectroscopic Studies of Mn and W Modified AgNbO3 Ceramics,

• Materials Chemistry and Physics, 180, 422–431 (2016).

• R. Muduli , R. Pattanayak , S. Raut , P. Sahu , Senthil V.S. Rath , P. Kumar , S. Panigrahi , R. K. Panda, Dielectric, ferroelectric and impedance spectroscopic studies in TiO2-doped AgNbO3 ceramic, Journal of Alloys and Compounds 664, 715-725 (2016).

• S. Roy, R. Maharana, S. R. Reddy, S. Singh, P. Kumar, T. Karthik, S. Asthana, V .V .B Prasad and S. V. Kamat, Structural, ferroelectric and piezoelectric properties of chemically processed, low temperature sintered piezoelectric BZT-BCT ceramics, Mater. Res. Express 3, 035702 (2016).

• S. Swain, P. Kumar, Synthesis and Characterizations of (1-ā)(NBT-BT)-āSBexT Ceramics for NVRAM Applications, Current Applied Physics, 16, 1105–1112 (2016).

• S. Swain, P. Kumar, Structural, Dielectric and Ferroelectric Study of (1-ā) (NBT-KNN)-ā SBexT Ceramics, Journal of Physics and Chemistry of Solids, 98, 59–64 (2016).

• S. R. Mohapatra, A. Swain, C. S. Yadav, S. D. Kaushik and A. K. Singh, Unequivocal evidence of enhanced magnetodielectric coupling in Gd3+ substituted multiferroic Bi2Fe4O9, RSC Adv. 6, 112282 (2016).

• R.K. Panda, R. Muduli, G. Jayarao , D. Sanyal, D. Behera, Effect of Cr3+ substitution on electric and magnetic properties of cobalt ferrite nanoparticles, Journal of Alloys and Compounds 669, 1928 (2016).

• S.P. Ghosh, K.C. Das, N.Tripathy, G. Bose, D.H. Kim, T.I. Lee J.M. Myoung and J.P. Kar, Morphological evolution of sputtered ZnO thin films with variation in RF power and substrate temperature, International Journal of Microstructure and Materials Properties, 11(5) (2016) 325-338.

• U. A. Yajnik, A. Sarkar, Sasmita Mishra, Debasish Borah, Flowering to bloom of PeV scale supersymmetric left–right symmetric models, Pramana 86 (2016) no.2, 295-305.

Publications in Conferences• Setup for Magnetoelectric Measurement in a Wide Temperature Range S. Kuila, Sweta K, M. R. Sahoo, A. Barik and P. N. Vishwakarma 61th DAE Solid-state Physics Symposium, 26-30 Dec 2016, KIIT University, Bhubaneswar-751024, Odisha, India; AIP

Conference Proceedings 1832, 060009 (2017).

• Effect of Sintering Time on the Phase Evolution of Biphasic La2NiMnO6 Sweta K, S. Kuila, M. R. Sahoo, A. Barik, P. D. Babu, V. Siruguri, and P. N. Vishwakarma 61th DAE Solid-state Physics Symposium, 26-30 Dec 2016, KIIT University, Bhubaneswar-751024, Odisha,

India; AIP Conference Proceedings 1832, 140034 (2017).

• Santripti Khandai, Mithra K., and Sidhartha Jena, Effect of surfactant on mechanical strength of polyacrylamide hydrogels: A rheological study,DAE SSPS 2016, AIP Conference Proceedings, 1832, 040018 (2017).

• Mithra K., Santripti Khandai, and Sidhartha Jena, Effect of sodium dodecyl sulphate surfactant on rheological properties of gelatine gum hydrogels, DAE SSPS 2016, AIP Conference Proceedings, 1832,040028 (2017).

• J. Raiguru, BVRS Subramanyam, K Sa, I Alam, S. Das, J. Mukherjee, P. C .Mahakul, B. Subudhi and P. Mahanandia Impact of Annealing Temperature on the Phase of CZTS with the Variation in Surface Morphological Changes and Extraction of Optical Bandgap,IOP Conf. Series: Materials Science and Engineering 178, 012017 (2017) doi:10.1088/1757-899X/178/1/012017.

• P. C. Mahakul and P. Mahanandia Structural and electrical characteristics of solution processed P3HT-carbon nanotube composite IOP Conf. Series: Materials Science and Engineering 178, 012017 (2017) doi10.1088/1757-899X/178/1/012024.

• K Sa, P. .C Mahakul, B. V. G. S. Ram Subrahmanyam, S. Saha, J. Mukherjee, and P. Mahanandia, Scalable synthesis of reduced graphene oxide using FeSO4, AIP Conference Proceedings 1832, 050133 (2017); doi: 10.1063/1.4980366.

• S. Dash, M. K. Pradhan, T. Lakshmanrao, P. D. Babu and V. Siruguri, Dielectric and magnetic investigations of codoped lanthanum orthoferite nanocrystals,International Conference on Nanomaterials

and Nanotechnology, Allahabad, India. DOI: 10.5185/icnano2017.

• S. Dash and T. Lakhamanrao, Tunable competition and possible coexistence of magneto-electric phases in a charge ordered manganite, Advances in Functional Materials, International Conference, 2016. ICC, Jeju Island, South Korea.

• S. Dash and L. Tangi, Dielectric and complex impedance analysis of charge order manganite: Pr0.75Na0.25MnO3. Conference Proceedings, FO3012, ICMST 2016, Kerala, India


178

• D. Behera Effect of Gamma Irradiation on Structural and Magnetic Properties of Bi Substituted Cobalt Ferrite Nanoparticles International Conference on Advances in Functional Materials (AFM-16), Seoul, South Korea, 8 - 11th August 2016.

• S. R. Mohapatra, B. Sahu, S. D. Kaushik, A. K. Singh Studying dielectric mechanism and magnetization of double perovskite Gd2NiMnO6 Ceramic, AIP Conf. Proc. 1731, 130043 (2016).

• B. Sahu, S. R. Mohapatra, M. S. Pattanaik, S. Raut, S. D. Kaushik, A. K. Singh Structural, Optical, Dielectric and Magnetic Investigation on Mixed Valance Pb3Mn7O15 AIP Conf. Proc. 1731, 140053

(2016).

• S. Chowki1, B. Sahu, A. K. Singh, and N. Mohapatra Dielectric response of double layered perovskite Sr3MnTiO7 AIP Conf. Proc. 1731, 090040 (2016).

• Mithra K., S Khandai, and S Jena, Effect of electrolytes on colloidal stability and swelling of hydroxypropyl cellulose microgels. AIP Conference Proceedings, 1728, 2016 (020220).

• K.C. Das, S.P. Ghosh, N. Tripathy, G. Bose, P. Parhi and J.P. Kar, Reduction of oxide and interface charge density of reactive sputtered HfO2 thin films by rapid thermal annealing DAE-SSPS-2016, 26th-30th Dec. 2016, KIIT University, Bhubaneswar, Odisha. AIP Conference Proceedings 1832, 080055 (2017).

• S.P. Ghosh, K.C. Das, N.Tripathy, A. Moharana, A. Adhikari, G. Bose, T. I. Lee, J. M. Myoung and J. P. Kar, Synthesis of copper doped Zinc oxide nanowires with enhanced ultraviolet photoresponse behavior, IOP Conf. Series: Materials Science and Engineering, 178 (2017) 012021. (6th NCPCM, 9th-10th Dec 2016, NIT Rourkela).

• N. Tripathy, K.C. Das, S.P. Ghosh, G. Bose and J.P. Kar, “Effect of Rapid thermal annealing on the structural and electrical properties of RF sputtered CCTO thin films”, IOP Conf. Series: Materials Science and Engineering, 178 (2017) 012009.(6th NCPCM, 9th-10th Dec 2016, NIT Rourkela).

• S.P Ghosh, K.C. Das, N. Tripathy, G. Bose, D.H. Kim, T. I. Lee, J. M. Myoungand J. P. Kar, Ultraviolet photodection characteristics of ZnO thin films and nanostructures, IOP Conf. Series: Materials Science and Engineering, 115 (2016) 012035.(5th NCPCM, 12th-13th Dec 2015, NIT Rourkela).

• N. Tripathy, K.C. Das, S.P. Ghosh, G. Bose and J.P. Kar, Fabrication of calcium copper titanate (CCTO) sputtering target by solid state route”, IOP Conf. Series: Materials Science and Engineering, 115 (2016) 012022.(5th NCPCM, 12th-13th Dec 2015, NIT Rourkela).

• S.N. Tripathy, Abhipsa Pati, K. L. Routray, and D. Behera, Investigation of electrical transport property in spinel NiCr2O4, AIP Conference Proceedings 1728(2016)10.1063.

• Krutika L. Routray and Dhrubananda Behera, Structural and Dielectric Properties of Bismuth Doped Cobalt Nano Ferrites Prepared by Sol-Gel Auto Combustion Method, IOP Publishing, IOP Conf. Series: Materials Science and Engineering 178, (2017) 012007 doi:10.1088/1757-899X/178/1/012007.

• K.L. Routray and D. Behera, Effect of Gamma Irradiation on Structural and Magnetic Properties of Bi Substituted Cobalt Ferrite Nanoparticles”, International Conference on Advances in Functional Materials (AFM 16) Organized at Jeju Seoul, South Korea during 8th to 11th August 2016.

• K.L. Routray and D. Behera, Study of bismuth doped cobalt ferrite nanoparticles using different spectroscopic techniques, International Conference (ICMAMN 2016) at FM University, Balasore during 25-27th November 2016.

• B. Sahoo and D. Behera, Field dependence of activation energy in YBCO/LSMO thick films, IUMRS-ICYRAM 2016, Bangalore, During Dec.11-15 , 2016.

• K.L. Routray and D. Behera, Investigating the Microstructural, Dielectric and Mossbauer Properties Of Bismuth Doped Nano Cobalt Ferrites Ceramic Prepared By Glycine Nitrate Process, International Conference (ISMA 16) at SOA University, Bhubaneswar during 15-17th December 2016.

• D. Behera, Critical Current Density in HTSC Nanocomposites”, International conference on Emerging Material : Characterization and Applications (EMCA 17) NIT, Durgapur during, 15-17th March 2017.

• Krutika L. Routray and Dhrubananda Behera, Role of Rare Earth (Gd3+) on Structural and Dielectric Properties of Cobalt Ferrite, International Conference on Materials for Advanced Technologies (ICMAT 2017), SINGAPORE, DURING, 18TH TO 23RD JUNE,2017.


179

Paper Accepted for Publication

Books / Book Chapter• Md N. Khan & S. Panigrahi, Principles Of Engineering Physics 1, Cambridge University Press India Pl, 2017, ISBN-

9781316635643.

• Md N. Khan & S. Panigrahi, Principles Of Engineering Physics 2, Cambridge University Press India Pl, 2017, ISBN- 9781316635650.

Patent


By Faculty:• Dr. P. Kumar was selected as Associate APAM fellow

By Students:Technical Association / Societies

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• D. Behera, Effect of Gamma Irradiation on Structural and Magnetic Properties of Bi Substituted Cobalt Ferrite Nanoparticles,

International Conference on Advances in Functional Materials (AFM 16) , Jeju Seoul, South Korea during 8th to 11th August 2016.

• D. Behera, Critical Current Density in HTSC Nanocomposites, International conference on Emerging Material : Characterization and Applications (EMCA 17) “ NIT Durgapur (Invited talk).

• D. Behera, Study of bismuth doped cobalt ferrite nanoparticles using different spectroscopic techniques, International Conference (ICMAMN 2016) at FM University, Balasore during 25-27th November 2016 (invited talk).



Co-PITotal Value


Enhancement, by swift heavy ion irradiation,of critical current densityin high Tc superconductor/ Ferromagnetic heterostructure multilayer thin films.

IUAC, New Delhi Prof. D. Behera 7 Mar 2014 31-03-2017

Swift Heavy Ion Irradiation induced pinning mechanism for engineering defects in SC/FM heterostructure to enhance critical current density.

BRNS, Govt. of India

Prof. D. Behera 25 Mar 2015 1-03-2018

Engineering novel multifunctional multiferroic materials with substantial magnetoelectric coupling,

DST Prof. A. K. Singh 27.6 Jan 2014 ar 2017

Structural, magnetic and microscopic correlation in magnetoelectric

UGC-DAE-CSR Prof. A. K. Singh 12 Jan 2016 Dec 2018

Nanometal-Ceramic-Polymer Composites for High Energy Density and Embedded Capacitors Applications

DRDO Prof. P. Kumar 48 Mar 2015 Mar 2018


180


Name of the PI /Co-PI



Development of multiferroic composites involving magnetic and ferroelectric oxides for magnetoelectric applications

DST Prof. P. N. Vishwakarma

64.7 Sep 2015 Aug 2018

Magnetic and dielectric studies of multifunctional composite oxides.

UGC DAE CSR, Mumbai

Prof. P. N. Vishwakarma

10.71 Jan 2016 Dec 20182018

Swift Heavy Ion Irradiated Ferroelectric-Ceramics-Polymer Nanocomposites for Power Nano-electronics

IUAC, New Delhi Prof. Dillip K. Pradhan

6.03 April 2014 Mar 2017

Investigation of the magnetoelectricity in co-doped BiFeO3 multiferroics

UGC-DAE CSR Mumbai Centre,

Mumbai

Prof. Dillip K. Pradhan

10.41 Feb 2015 Jan 2018

Neutron diffraction investigation of the magnetic structure and phase transition in doped LaFeO3 nanocrystals

UGC-DAE CSR MUMBAI

Prof. Suryanarayan

Dash

10.71 Jan 2016 Dec 2018

Investigation of efficiency of CNTs/graphene hybrid inorganic photovoltaic cells

SERB,DST Prof. Pitamber Mahanandia

27.90 21-09-2017 20-09-2017

Novel photovoltaic cell made up of CZTS and graphene


30.47 06-07-2015 05-07-2018

To investigate the effect of grain boundary on electrical properties of graphene prepared by electrochemical method


24.57 23-01-2016 22-01-2020

Study of the effect of disorder on attractive fermions in optical lattice

DST-SERB Prof. Sanjoy Datta

34 2016 2019

Investigating Diffusive Dynamics of Polymer Solutions in Complete Concentration Range.

BRNS Prof. Sidhartha Jena

25 2013 2017

Study of properties and distribution of Interstellar dust in the Magellanic CloudsDuration: 2015-18

DST-SERB Prof. A. C Pradhan

4.11 Jan 2016 Dec 2018

Study of structure of our Galaxy using ultraviolet star counts of GALEX and UVIT Astrosat Surveys

ISRO Prof. A. C. Pradhan

18.78 2017 2020

Sputter-growth of high-k dielectric thin films and nanostructures on silicon substrates for microelectronic and sensor applications

DST Fast Track Prof.J.P. Kar 23.00 Oct 2013 Oct 2016

A study of neutrino parameters in Left right symmetric models

DST-SERB Prof. Sasmita Mishra

15 July 2016 Jun 2019


181







Priyambada Nayak Synthesis and Characterization of Homovalent and Heterovalent Substituted Strontium Bismuth Titanate Ceramic

Prof. S. Panigrahi

Rakesh Muduli Dielectric, Ferroelectric and Impedance Spectroscopic Studies of Agnbo3 and Its Modified Systems

Prof. S. Panigrahi And Prof. P. Kumar

Tapabrata Dam Study of Relaxation Dynamics and Ion Conduction Mechanism of Composite Polymer Electrolyte and Gel Polymer Electrolyte

Prof. Dillip K. Pradhan



182

SCHOOL OF MANAGEMENT


294 | P a g e

School of MANAGEMENT




39

10

5

10

15

20

25

30

35

40

45

MBA Ph.D.

74

0

10

20

30

40

50

60

70

80

MBA


294 | P a g e

School of MANAGEMENT




39

10

5

10

15

20

25

30

35

40

45

MBA Ph.D.

74

0

10

20

30

40

50

60

70

80

MBA


295 | P a g e

FACULTY

SL Name & Specialization1 Prof. Dinabandhu Bag ([email protected])

Associate Professor, Ph. D. (Mysore)Finance, Banking, Economics

2 Prof. Rajeev Kumar Panda ([email protected])Assistant Professor, Ph. D. (Sambalpur University), FDPM (IIMA)Marketing Research, Service Quality, Strategic Branding, Agricultural Marketing, Entrepreneurship Development.

3 Prof. Chandan Kumar Sahoo ([email protected])Associate Professor, Ph. D. (Utkal University)Competency Mapping, Quality of Work Life, Talent Management, Organizational Restructuring and People Management, Employee Relations, Corporate Social Responsibility.

4 Prof. Shigufta Hena Uzma ([email protected])Assistant Professor, Ph. D. (IIT, Roorkee)Intangible Asset Valuation & Accounting, Financial Derivatives, Corporate Brand Management, Brand Valuation, Corporate Governance

5 Prof. N. M. Leepsa ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur), Mergers and Acquisitions, Accounting for Decision Making, Corporate Finance

PUBLICATIONPublications in Journals

• Adhikari, K. and Rajeev Ku. Panda (2017). Social media brand communities and brand loyalty: An integrated ahp approach, International Journal of Virtual Communities and Social Networking, 9 (2), 62-79.

7

0

1

2

3

4

5

6

7

8

TCS


183

FACULTYSL Name & Specialization1 Prof. Dinabandhu Bag ([email protected])

Associate Professor, Ph. D. (Mysore)Finance, Banking, Economics

2 Prof. Rajeev Kumar Panda ([email protected])Assistant Professor, Ph. D. (Sambalpur University), FDPM (IIMA)Marketing Research, Service Quality, Strategic Branding, Agricultural Marketing, Entrepreneurship Development.

3 Prof. Chandan Kumar Sahoo ([email protected])Associate Professor, Ph. D. (Utkal University)Competency Mapping, Quality of Work Life, Talent Management, Organizational Restructuring and People Management, Employee Relations, Corporate Social Responsibility.

4 Prof. Shigufta Hena Uzma ([email protected])Assistant Professor, Ph. D. (IIT, Roorkee)Intangible Asset Valuation & Accounting, Financial Derivatives, Corporate Brand Management, Brand Valuation, Corporate Governance

5 Prof. N. M. Leepsa ([email protected])Assistant Professor, Ph. D. (IIT, Kharagpur), Mergers and Acquisitions, Accounting for Decision Making, Corporate Finance

PUBLICATION

Publications in Journals• Adhikari, K. and Rajeev Ku. Panda (2017). Social media brand communities and brand loyalty: An integrated ahp approach,

International Journal of Virtual Communities and Social Networking, 9 (2), 62-79.

• Misra, Siddharth and Rajeev Ku. Panda, (2017). Environmental consciousness and brand equity: An impact assessment using analytical hierarchy process (AHP), Marketing Intelligence and Planning, 35 (1), 40-61.

• Nayak, T., Sahoo, C. K. and Mohanty, P. K. (2017). Impact of HR interventions on quality of work life: evidence from healthcare units”, International Journal of Indian Culture and Business Management, 14 (2): 214-236.

• Sahoo, K. K., Sahoo, C. K. and Tripathy, S. K. (2017). Outcome of training and development measures in public sector banks of India: An overview”, Productivity, 57 (4): 401-409.

• Gupta, R. K. and Sahoo, C. K. (2016). HRD interventions, employee competencies and organizational effectiveness: an empirical study, European Journal of Training and Development, 40 (5): 345 – 365.

• Nayak, T., Sahoo, C. K., Mohanty, P. K. and Sundaray, B. K. (2016). HR Interventions and quality of work life of health care employees: An investigation, Industrial and Commercial Training, 48 (5): 234-240.

• Sahoo, K. K., Sahoo, C. K. and Tripathy, S. K. (2016). Performance enhancement through human resource development interventions, Personnel Today, 37 (2): 11-18.

• Leepsa, N. M. and Singh, R. (2016). Feasibility of investing in carbon efficient equity portfolios, The International Journal of Banking and Finance (IJBF), 12 (2): 23-41.

• Leepsa, N. M. and Mishra, C. S. (2016). Past studies on post M & A performance: A review of manufacturing firms in India”, Vilakshan: The XIMB Journal of Management, 13 (1), 115-138.

• Leepsa, N. M. and Mishra, C. S. (2016). Theory and practice of mergers and acquisitions: Empirical evidence from indian cases., IIMS Journal of Management Science, 7 (2), 179-194.

• Leepsa, N. M. and Singh, R. (2016). Testing the weak form of efficient market hypothesis in carbon efficient stock indices along with their benchmark indices in select countries, Iranian Journal of Management Studies, 9 (2), 217-455.

• Leepsa, N. M. and Singh, R. (2016). Impact of acquisition of insurance company on bank’s financial performance: A case study on acquisition of Metlife India Insurance Co. Ltd. by Punjab National Bank, IUP journal of Bank Management, 15 (3), 52-67.


184

Publications in Conferences• Sahoo, K. K. and Sahoo, C. K. (2017), Enhancement of employee competencies through strategic HRD interventions, Internal

Seminar on “Strategic Human Resource Management” Organized by Dept. of Personnel Management & Industrial Relations, Utkal University, Bhubaneswar held during 13th – 14th May, 2017.

• Chaubey, A. and Sahoo, C. K. (2016), Blooming employee creativity through organizational support and transformational leadership: An empirical investigation, 26th Annual Conference of the National Academy of Psychology (NAOP), India organized by Indian Institute of Technology Madras, Chennai held during December 29-31, 2016.

• Sahoo, R. and Sahoo, C. K. (2016). Organizational justice, employee empowerment and conflict management are the predictors of cordial employee relations, FORE International OB & HR Conference 2016 on “Riding the New Tides: Navigating the Future through Effective People Management” organized by FORE School of Management, New Delhi during November 24-25, 2016.

• Panda, A. and Sahoo, C. K. (2016). Impact of HR interventions on work life balance of IT professionals, FORE International OB & HR Conference 2016 on “Riding the New Tides: Navigating the Future through Effective People Management” organized by FORE School of Management, New Delhi during November 24-25, 2016.

• Pragyan Dash and N. M. Leepsa (2016). Determinants of merger and acquisition and its relation with company performance, paper presented at ICFMCF-2016, Indian Institute of Technology Madras, Chennai, India.

• B. P. Bijay Sankar and N. M. Leepsa (2016). Choice of payment methods in mergers and acquisitions: Review and reappraisal of past empirical research, paper presented at ICFMCF-2016, Indian Institute of Technology Madras, Chennai, India.

• N. M. Leepsa and Chandra Sekhar Mishra (2016). Predicting success of mergers and acquisitions in the manufacturing sector in India: A logistic analysis, paper presented at ICFMCF-2016, Indian Institute of Technology Madras, Chennai, India.

• Ranjit Singh and N. M. Leepsa (2016). Performance evaluation of carbon efficient equity indices using ratios, paper presented at 68th All India Commerce Conference, Department of Commerce & Management Studies, Vinoba Bhave University, Hazaribag, Jharkhand, India.

Technical Association / Societies• IIRA, ISTD, ISLE, ISTE, NHRDN, NIPM, SSAI, NAOP, AOM, SHRM

• IIBF Mumbai, TIES, Delhi

• AMS, EMAC, IEDRC, ISAM, AIMS International

SEMINAR, SYMPOSIA, SUMMER / WINTER SCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY DEPARTMENT, PARTICIPATION BY FACULTY MEMBERS• Seminar on “Union Budget 2017-18: Perceptions and Reality” 2017, School of Management, National Institute of Technology

Rourkela.

• National Management Conclave on “Business, Innovation & Sustainability” during 7th – 8th January, 2017.

RESEARCH PROJECTsName of the Project Sponsoring Agency Name of the

PI / Co-PITotal Value


Impact of human resource development interventions on organizational effectiveness: an empirical investigation

ICSSR, New Delhi

Prof. C. K. Sahoo

3.50 Sep 2015 Jun 2017

Impact assessment study on CSR activities with focus on capacity building and sustainable livelihood: a study on MCL

MCL, Sambalpur Prof. C. K. Sahoo

9.15 Sep 2015 Dec 2016

Innovation & Entrepreneurship Development Centre

DST Prof. R. K. Panda

13.30 July 2014 July 2019

Support for entrepreneurial and managerial development of SMEs through incubators

MSME Prof. R. K. Panda

67.50 Mar 2015 Mar 2020


185

Name of the Project Sponsoring Agency Name of thePI / Co-PI

Total Value(Rs. in Lakhs)


Assessing healthcare service quality of Primary Health Centres (PHCs) in rural Odisha

ICSSR, New Delhi

Prof. R. K. Panda

6.00 Sep 2015 Mar 2017

Impact Of Pre-Open Call Auction On Price Discovery In Indian Security Markets

ICAI NOIDA

Prof. D. Bag 1.76 Jun 2016 Dec 2016

Exports of Traditional Crafts from Select Clusters in India: Art Metal Wares & Imitation Jewellery

Commissioner of Handicrafts, New

Delhi

Prof. D. Bag 6.96 Oct 2016 Sep 2017

Estimation of Health Costs: Challenges for Health Insurance Penetration in India

IRDA, Hyderabad Prof. D. Bag 8.92 Oct 2016 Sep 2017

Empirical Investigation into Merger and Acquisition in Service Sector in India

ICSSR,New Delhi

Prof. N. M. Leepsa

5.00 Jun 2016 Jun 2018

Impact Assessment of CSR Activities of SECL, Bilaspur

SECL, Bilaspur Prof. C. K. Sahoo

13.75 Jun 2017 Feb 2018

LIST OF LABORATORIES1. OR Laboratory2. Banking Operations Laboratory3. Project Laboratory4. Marketing Laboratory5. Basic Computer Laboratory6. Business Simulation Laboratory7. Statistics Laboratory8. HR Laboratory9. IGBO Laboratory9. Management Games Laboratory


Ram K. Rao KondasaniDecember, 2016

Managing Customer Perceived Service Quality in Indian Private Healthcare Sector

Prof. Rajeev Kumar Panda

Tanaya NayakJanuary, 2017

Impact of Quality of Work Life on Turnover Intention: A Study on Private Health Care Units in Odisha

Prof. Chandan Kumar Sahoo


186

7. ACADEMIC CENTRES

Computer Centre

HeadProf. Chandan Kumar Biswas, Ph.D. in Mechanical Engineering

Principal Scientific Officer1. Mr. D.K. Purohit, M.Sc. (Statistics), PG Dip.in Comp.Sc. & App., PG Dip.in Ind. Relations & Personnel Mgmt.

Scientific Officers1. Mr. M.R. Pattanayak, MCA2. Mr. B.B. Behera, B.Tech3. Mr. T.K. Pattnaik, B.Tech

Technical Assistants1. Mrs. S. Mohapatra, 2. Mr. P. K. Tripathy, Dip. in Electronics & Tele Comm. Dip. in Electronics & Tele Comm.

3. Mr. M. K. Patnaik, MCA 4. Mr. D. K. Barik, M.Com., PG Dip.in Computer Mgmt.

5. Mr. B. K. Sahoo, B. Tech 6. Mr. S. Sarangi, B. Tech.

Assistants1. Mr. S. S. Dandapat, BA

Attendants1. Mr. A. Jate 2. Mr. N. Susani

Information regarding CC activities to be published in the Annual Report of the institute for the period 2016-17:Computer Centre has 9 Laboratory at LA complex are equipped with 750 numbers of Desktop systems with Intel i-7 Computer systems with 2 GB DDR3 RAM, 320 GB HDD and 18.5” TFT monitors. All the Laboratories have got backup power supply from 40 KVA x 4 Emerson make UPS systems as well as from Diesel generator 750 KVA set. With these Computer Centre facilitates conductance of laboratory classes i.e., Machine Drawing and Solid Modelling (ME-170), Engineering Drawing (CE-171), Language Lab (HS-270) are also being conducted at Computer Centre along with Computing Laboratory-I (CS-171), Computing Laboratory-II (CS-172), Design & Calculation Lab (MM-473), Computational Modelling & Metallurgical Process (MM-697), Data Analysis Lab (ER-565), Matlab Introduction Lab (ER-563), Computational Biology Lab-I (LS-275), Computational Biology Lab-II (LS-371), Computer aided Drawing Design Lab (LS-573), Bio Informatics Lab (LS-472), Computational Nuclei Acids & Proteins (LS-478), Object Oriented Programming Practice Lab (MA-471), Laboratory work on Mathematical software (MA-371), Computational Chemistry Lab (CY-571) and Computer Work on Numerical Methods (MA-270) for UG & PG students. Computer Centre is in the verge of adding three more Computing Laboratories.

Software Purchased:• MATLAB – Unlimited user license for three years.

• Solidworks – Solidworks Edu edition 2016-17 Network – Campus license (500 users) with three years subscription.

• OriginLab – Concurrent Network Floating Life Time Perpetual License for Academic use.

• SYSTAT 13 – SYSTAT 13 Software - One Hundred User Perpetual (Life Time) License (Network License) with all modules.

• SPSS – Upgrade of IBM SPSS from version 20 to version 24, Network version with 3 years AMC.

• Ansys – Renewal & Upgradation of Ansys 15.0 to 18.1 with 3 years SSP.


187

Central Facilities provided by Computer Centre for the Institute includes:• Computational facilities during recruitment test for non-teaching posts.

• Online voting facilities from halls during Student Election process.

• Online video presentation of President’s address to student and teachers community

• On the eve of New Year Day.

• Online recruitment test by Training and Placement cell for final year students.

• Conducting GATE Examination.

• Gaming events during various SAC festivals.

• Seminar facility to departments like Humanities and Biju Patnaik Central Library.

• Demo online sessions for faculty members and staffs to show the use of various software modules developed by automation cell, like File Tracking, HR Leaves, Estate Management etc.

• Training sessions for technical staffs of the institute on MS-WORD, MS-EXCEL, MS-POWERPOINT, Basic of Windows.

• High Performance Computing facility for research

• eMail Service.

• Internet Facility.

• Single sign-on authentication.

• File Storage.

• Backup facility for servers.

• Website & Web Hosting service.

• Terminal service for computer laboratory.

• Domain Naming Facility.

• Support for Licensed Software used by department.

• Repository services for Software.

• DHCP and IP registration and allocation facility for campus network.

• Video Conferencing support.

• Cable and wireless networking facility to hall, academic and residential areas.

• 24x7 Facility Management Service for Server, Storage & Network.

• 24x7 uninterrupted power backup facility for data centre.

• Biometric attendance management system.

WORKSHOPThe Central Workshop is a separate department with its own staff. However, it runs with the help of faculty members drawn from other departments. It consists of four sections namely, i) Machine shop, ii) Carpentry and Fitting shop, iii) Welding and Foundry shop, and iv) Electrical, Electronics and Computer shop. It handles the teaching of workshop practical courses meant for all the 1st year students at undergraduate level in addition to that for higher semester students of a few departments namely Mechanical Engineering, and Materials and Metallurgical Engineering departments at both undergraduate and postgraduate levels. Besides curriculum courses, its facilities are extended to all other departments of the institute in conducting various projects/research works at UG, PG and Doctoral level under the guidance of the respective guides. It facilitates in imparting practical skill to the students in major fields of engineering and technology. It also provides all sorts of facilities to students for making products to participate in various competitions including racing cars. Besides conventional machines and equipments, it also has most modern fabrication and production units in tune with the recent technological developments.


188

ACADEMIC STAFFS:Prof. Saurav Datta (ME) : Ph.D. (Jadavpur University, Kolkata)(Head of the Department)

Prof. Somya Gangyopadhyay (ME) : Ph.D (IIT, Kharagpur)(PIC, Machine Shop)

Prof. Manoj Masanta (ME) : Ph.D. (IIT, Kharagpur)(PIC, Welding and Foundry Shop)

Prof. Suraj Kumar Behera (ME) : Ph.D. (Pursuing at NIT Rourkela)(PIC, Carpentry and Fitting Shop)

Prof. Gopalakrishna S (EE) : Ph.D. (IIT, Madras)(PIC, Electrical, Electronics & Computer Shop)

FACILITIES AVAILABLE

Machine ShopLathe Machine (HMT, TUSSOR MACHINE TOOLS, MYSORE KIRLOSKAR LTD, HMT), Hydrocopying Lathe (HMT), Horizontal Milling Machine(BHARAT FRITZ WERNER), Universal Horizontal Milling Machine (HMT), Cylindrical Grinding Machine (RIAT & SONS), Surface Grinding Machine (BHURJI), Bench Pedestal Grinder (PREM BROTHER), Pedestal Grinder (YESCO), Bench Drill (EIFCO MACHINE TOOLS, COIMBATORE), Radial Drilling Machine (HMT), Tools & Cutter Grinding Machine (MITTER INDIA), CNC Drilling and Tapping Machine (MTAB/ SREYAS), CNC Milling Machine (MTAB/ MAXMILL), CNC Surface Grinding Machine(PRAGA), CNC Turning Machine (MTAB/ MAXTURN), Vertical Band Shaw (ULTRACUT INDUSTRIES), Power Hacksaws (HIPAT, HMT)

Carpentry and Fitting ShopBosch Power tools (Nibbler, shear, router, angle grinder, straight grinder, chop saw, sabre saw, Mitre saw, Double swivel mitre saw, Single swivel mitre saw, Circular saw, Jig saw, Table Saw, Chain saw, planer, Eccentric sander, Orbital sander, Rotary Drill, Impact Drill, Impact Wrench), Pillar drilling machine (Maya Engg.), Hollow Chisel Mortiser

Welding and Foundry ShopAC ARC Welding and Gas welding system (L&T), Pipe Bending M/C(SHIVAJI), Pedestal Grinder (FLOTTIT BIJLI, Bestron Engg), Cut-off saw (BOSCH), Lathe (PATHAK)

Electrical, Electronics and Computer Shop • Digital storage oscilloscope, 100 mhz, inbuilt function generator.

• Hand operated transformer winding machine.

• Bench drilling machine, 0.5 hp.

• Small grinding machine, 0.25kw.

• Electrical load board equiped with different lamp loads.

• Digital multimeter, 10a, ac 750v, dc 1000v, 5 ½ digit.

• Armature winding machine.


189

Biju Patnaik Central Library


190

BIJU PATNAIK CENTRAL LIBRARYProf. A.K.Panda ([email protected]) – Professor In-Charge Library

Dr. Bhojaraju Gunjal ([email protected]) - Head & Deputy Librarian

Biju Patnaik Central Library (BPCL) of NIT Rourkela, named after the legendary industrialist and statesman, and the founding Chairman of Board of Governors of REC Rourkela, is functioning since 1965. It acts as main learning resource centre of the institute which constitutes robust collections in both print and electronic resources. It presently holds over 79,300+ books, 90 print journals, 30 e-resources database which provide access to over three thousand five hundred titles of serials including archive collections and 18,000 back volumes of periodicals. The library has purchased license to access online Science and Technology, Management, Humanities & Social Sciences journals along with few provided by e-ShodhSindhu consortium to support teaching and research activities by faculty, students and research scholars. Approximately Rs.4.5 crores has been incurred on procurement of books, e-books and other e-resources. The library also has a rich collection of IS codes, educational video courses and audio-visual materials.

Every year, BPCL organizes the Annual Book Fair to facilitate easy access and procurement of the latest publications for both the Institute and individuals. It is fully automated with integrated library management software Libsys and modernized with latest Radio Frequency Identification (RFID) based automation system that facilitates self-check-in/check-out with automatic security system. This technology offers an easy, fast and an efficient means of tracking, locating and managing of library resources. The circulation system counts more than 1.2 lakhs transactions per year including visits, issue, return and renewal of books.

BPCL also manages institutional repositories such as e-Papers@NITR (DSpace) – an Institutional Repository has over two thousand publications and e-Theses@NITR (ePrints) - a repository has over four thousand thesis and dissertations. The status of these repositories in Ranking of Web Repositories published as on July 2017 is as follows:

e-Thesis (ePrints) - the institutional Open Access electronic theses repository has been ranked 2nd in India and 527th among institutions around the world.

e-Papers (DSpace) - the repository of all intellectual output of NITR is ranked at the 28th place in India and 1868th in the world.

This ranking is published in Web of World repositories - an initiative of the Cybermetrics Lab, a research group belonging to CSIC (Consejo Superior de Investigaciones Científicas), the largest public research body in Spain.

Library Team:Sl. Name & Responsibilities

1. Dr. Bhojaraju Gunjal ([email protected]) Head & Deputy LibrarianLibrary Administration & Management

2. Shri Vinod Kumar Mishra ([email protected]) Assistant LibrarianAcquisition & Technical Section In-Charge

3. Shri Dibya Kishor Pradhan ([email protected]) Assistant LibrarianDigital Resource Centre Section In-Charge

4. Smt. Puspita Mishra ([email protected]) Assistant LibrarianCirculation Section In-Charge

5. Shri D. P. Tripathi ([email protected]) Assistant LibrarianPeriodicals & E-Resources Section In-Charge

6. Shri K. Das ([email protected]) Sr. Technical AssistantResearch Support & Reference

7. Shri Srikanta Sahu ([email protected]) Library Information AssistantAcquisition & Technical Section

8. Shri Sanat Kumar Behera ([email protected]) Library Information AssistantPeriodical Section


191

Library Services:Apart from procuring, processing and distributing books, periodicals and other documents, the library offers several innovative services to the institute community such as:

• Current Awareness Services – New Arrivals Alert,• User education programmes for faculty and students on literature search, patent search and accessing information from across

the globe etc.• Organizing workshops/training programmes/conferences on various latest tools and technology in library and information

science at national level.• BPCL staff actively participates in implementing open source tools and technology.• Provides consultation and technical services to libraries at national level.• Conducting Book Fair, Departmental display of books to make the latest books available to the faculty and students.• Alert services to the users such as New Arrivals, Overdue Notice, Collect Notice, different e-mail alerts regarding services.• Self-service (check-in/check-out and renewal) system using RFID technology• Web-based public access catalogue. • Archival of Scholarly publications ( Articles, Presentation, Theses etc)• Article / Document Delivery Service on request • Dissemination Management System (In-house scholarly publications database) • Digitization of documents (Odia Book & official documents)• Reference Services• Book Bank • Trial Access and demonstrations of latest resources• User Awareness Workshops (UAW) on various resources• Liaison Program with Departments (LPD)• Research/Project Support Services (RPS)• Subject / Research Guide

Library website: <http://library.nitrkl.ac.in> The web pages of BPCL inside NITR web site is based on Joomla open source content management system. Approximately 1 Lakhs users visited this website within one year; it contains information about the BPCL resources, staff, manuals etc. for the benefit of users.

Library e-Newsletter <http://library.nitrkl.ac.in/index.php/e-newsletter-archive> BPCL has started publication of e-News Letter from January 2014, it is the best tool for marketing of library services and to provide useful information services relevant to NITR community.

Web-based Video Courses <http://dlib.nitrkl.ac.in/videocourse/>called ‘Open Course Ware’ of the national NPTEL (Phase – I & II) programme is available to the students and faculty of NIT Rourkela over the institutional network. The library has acquired course work in five major engineering disciplines: Civil Engineering, Computer Science and Engineering, Electrical Engineering, Electronics and Communication Engineering and Mechanical Engineering at the undergraduate (B.E./B.Tech) level. More than 10,000 video lectures & web course are available in local streaming media.

IEEE-SWEBOK – a learning management system (LMS) developed by IEEE Computer society is available at NITR for the Software Engineers and the Computer Science students.

Blog <http://192.168.1.126/blog/> called ‘Library Services Blog’ is an intellectual tool for documentation of information among local users and to support research support and awareness activities. It alerts and informs patrons about the latest developments in the field of science, engineering, technology, management and humanities.

Library facilitiesRFID based Book Circulation System: Library is fully automated with LibSys and also integrated with RFID devices which control the circulation system for self/issue return easily. Users are free to access the Circulation KIOSK at any time during normal library working hour. Koha LMS pilot implementation is under progress now.

Seminar Room: BPCL is also having separate seminar room with seating capacity of 30 people at a time which is used mainly for educating the trainees / internal staff. Seminar room is also used for educating the users on demand basis in order to educate the users.

General Reading Hall: BPCL facilitates a general reading hall adjacent to the library users for self-study with their personal books.

Scholar Zone: A silent zone with reading area for research scholars has been facilitated.

Reference Section: A reference section is facilitated reference collection like books, hard copy theses, AV materials etc.

Other facilities: Wi-Fi access, Centralized Air Conditioning, Seating capacity – Reading rooms, Elevator


192

Special ProjectsOpen Access to Odia Books (OAOB) (http://oaob.nitrkl.ac.in/) is a non-profitable project, initiated by NlT Rourkela, Srujanika, Bhubaneswar and Pragati Utkal Sangh, Rourkela. The mission of the project is to preserve the cultural history of Odisha by digitizing old, rare and new literary and other texts written in the Odia language.

The primary focus is to digitize rare and copyright-free Odia documents (books, texts and manuscripts) which are under deteriorating condition in libraries, archives and individual collections in order to make them openly accessible to all, and to preserve then for posterity. Around 600 books are digitized and archived as open access.

New initiativesLiaison Program with Departments (LPD): BPCL has started Liaison Program with Departments to educate the NITR academic fraternity about the resources and services available at BPCL. This program helps in promoting and marketing the library services.

Research / Project Support Services (RPS): BPCL has also started the Research / Project Support Services for NITR academic fraternity in which users are educated by conducting the user education programs and training on current tools such as reference manager; plagiarism checker; grammar checking etc. and other techniques on research writing in order to educate them how to use the resources for their own research.

Library Survey: BPCL conducts a library survey “My Views-Feedback on Library” for all users once in two years. The objective of this survey is to collect the feedback about library services and its infrastructure. Survey result will help BPCL team in improving the services and preparing a plan for its future initiatives.

Subject / Research Guide: BPCL has customized and designed Subject/Research Guide – a guide of all useful resources on a particular subject/department for the benefit of NITR community. The objective of this guide is to provide information about the key resources accessible to all NITR community in a particular subject.

Library Timings: Library remains open from 9:00 am to 10:00 pm on all working days and from 9:00 am to 6:00 pm on Saturday, Sunday and Holidays. Timings will also be extended during examination period.

Library Resources:Books: Library has successfully built up a comprehensive collection of over 79360 books from which 8684 books are reference.

E-Resources: BPCL subscribes to a number of important databases which are accessible within the campus network.

a. E-Databases/journals consists of Abstract Databases (08) and Full Text Databases (25) which provide access to more than 6000+ titles including e-ShodhSindhu provision which are accessible within campus as well as over Internet which can be accessed at http://library.nitrkl.ac.in

b. E-Books collections of 15,600+ titles (including 5000 Complementary Vol. from Springer and Elsevier)

Institutional Repositories: BPCL manages the following Institutional Repositories (IR) to preserve the scholarly output of the institute.

a. E-Papers (DSpace@NITR) <http://dspace.nitrkl.ac.in/dspace> is an open access repository of institutional research output of the faculty, researchers and students. At present, the repository holds nearly 2568 documents consisting of scholarly publications such as journal papers, conference papers, book chapters, presentations and doctoral theses and it is accessible openly and globally.

b. E-Theses@NITR <http://ethesis.nitrkl.ac.in/> is an institutional open access electronic thesis and dissertations (ETD) repository contains 5719 theses of the Institute. This repository is an attempt to make all locally produced theses more visible to global users. It is mandatory for students of all disciplines [BTech, M.Tech., M.Sc, MA, MBA eralier] and (Ph.D & MTech (Res)-Present] to upload the final version of their theses submitted to the institute as a part of their academic requirement.

c. NITR Documents <http://documents.nitrkl.ac.in/jspui/> is a repository of official documents of NIT Rourkela which contains 199 documents such as minutes of BOG, HOD, Senate meetings, etc.. The archive is being maintained using DSpace – open source digital library software.


193

Other Collectionsa. Back Volumes : 17900+

b. Videocassettes : 670+

c. CD-ROMS (including accompanied with Books) : 960+

d. IS Codes : 10000+

DOCUMENTS / EQUIPMENTS ACQUIREDA. Expenditure on Books (FY 2016-17)

i. No. of Books available up to 31.03.2017 : 79360 ii. No. of Books added during 01.04.2016 to 31.03.2017 : 1132 iii. Expenditure on purchase of books during the financial year 2016-17 : Rs. 56,28,826.00

B. Expenditure on Periodicals (CY* 2016)

iv. No. of E-resources subscribed : 25 (Full Text E-resources)

8 Database, 1 e-book series (625)

v. Print periodicals : 90 Titles

vi. Expenditure on e-resources & print periodicals : Rs. 3.08 Crores (Appx) Cal. Year

*Calendar Year

C. Expenditure on Other items (FY 2016-17)

InfrastructureItem Qty Price (Rs.)Modification of Wooden racks 30 78300Reading Tables and Chairs 25 + 100 411438Total 489738

Computer AccessoriesDell SMPS 1 2400UPS 5 10501Cartridge - All types 9 37663HP IPS LED Monitor 1 11025Logitech USB Otical Mouse + Cable 7 2550USB Optical Mouse Pointer 1 4500Oddy Paper Roll 50 3300Battery, Port switch ,SMPS, CMOS 10+01+02+18 12790RFID Tags 4000 59440Total 144169

StationeriesOffice stationeries 15070

MiscellaneousName Plates in Hindi and English 29 14504Book Shelf 1 11650AMC of Aqua guard 1 3895Other expenses 1 12731Total 42780

D. Expenditure on Library management (FY 2016-17)

Description Price (Rs.)General cleaning and Shelving of Books 8,02,344.00

vii. Any other facilities added : Central AC, Wi-fi,


194

Library Advisory Committees:BPCL Library Advisory Committee (BPCLAC) is constitutes with one member from every department. PIC is the Chairman and HOC, BPCL is the Member Secretary of the committee. The meeting is conducted twice in a year and also as and when required to discuss about the development of library activities.

Other sub-committees for library exist such as Purchase, Negation Committee, Book Bank, Stock Management, Book Fair, Library Automation and Digitization to handle the library activities smoothly.

Awards & Achievements/Honors:• Dr.Gunjal received Global Innovation Awards 2016: Honorable Mention by Turnitin, 2016.

• Dr.Gunjal received IASSIST Fellow by IASSIST Data, 2016.

• Mr. D. P. Tripathi received “Dr. Ramesh Chandra Vashishth Best Paper Award” in Library Herald Award-2016 by Delhi Library Association, New Delhi.

• Mr. D. P. Tripathi received “A.G. Motiwale Young LIS Professional Award-2017” from Indian Library Association, New Delhi.

Publications by Library Staff:

Publications in Journals• Gaffar A, & Gunjal B (2016). Access and Usage of E-Journals by Research Scholars in National Institute of Technology (NIT)

Rourkela, Odisha: A Case Study. Journal of Indian Library Association, 52(1&2) Pp.17-22.

• Sharma A K, Tripathi D P and Mishra V K (2016) Koha Web OPAC- Customizing it to make a Library Portal: A case study of Assam University Library, Library Herald. 54(2).

Publications in Conferencesi. Tripathi DP, Gunjal B and Pradhan DK (2017). Open Source Solutions for Creation of ETD Archives/Repository: A Case Study

of Central Library@NIT Rourkela; In Proceedings of 62nd Indian Library Association Conference 2017 ILA International Conference on “Gearing up for the future: Library initiatives for digital India”, Karnataka State Women’s University, Jnanashakti campus,Torvi, Vijayapura, Karnataka, India 9-11 February 2017. (Best Paper Award).

ii. Vinod Kumar Mishra, Puspita Mishra (2016) Application of Open source solutions for digital asset management: a case study of NIT Rourkela, International conference on digital library on Smart Future Knowledge Trends that will Change the World, New Delhi, India, 13-16 December, 2016.

Paper Accepted for Publication• Gunjal, B and Gaitanou, P (2017). Research Data Management: A proposal to boost research in Higher Educational Institutes;

IASSIST Quarterly (submitted).

• Gunjal B and Gaffar AS (2017). “Awareness and access to mobile applications in an Academic Library: A study”; Annals of Library and Information Studies (ALIS) (submitted).

• Das K, Behera S. K. and Gunjal B. (2017). Enhancing Library Services through Subject Guide: a Case Study of NIT Rourkela; In Singh,V.K., Kumar, A and Kumar, M (Eds), A Mirror to the Basics of Librarianship in New Millennium (Submitted)

Books / Book Chapter• Gunjal B (Ed.) (2017). Managing Knowledge and Scholarly Assets in Academic Libraries (pp. 1-381). Hershey, PA: IGI Global.

doi:10.4018/978-1-5225-1741-2 ISBN:978-1-5225-1741-2. URL:http://www.igi-global.com/book/managing-knowledge-scholarly-assets-academic/164791.

• Gunjal, B. (2017). Managing Knowledge and Scholarly Assets in Academic Libraries: Issues and Challenges. In B. Gunjal (Ed.), Managing Knowledge and Scholarly Assets in Academic Libraries (pp. 270-279). Hershey, PA: IGI Global. doi:10.4018/978-1-5225-1741-2.ch013 | ISBN: 978-1-5225-1741-2.

• Gunjal, B., Pradhan, D. K., Tripathi, D. P., Mishra, V. K., Mishra, P., & K, Das. (Eds.) (2016). Electronic Resource Management in Libraries: Trends, Issues and Challenges. New Delhi: Ess Ess Publication, 2016. Print. ISBN: 978-81-7000-8071.

• Karadia, A., Seth, A. K. & Pradhan, D. K. (2016). Mobile Technology in Libraries for Discovering E-Resources & Services. In Gunjal, B et.al. (Ed.), Electronics Resources Management in Libraries: Trend, Issue & Challenges (pp. 328-340). Ess Ess Publication. ISBN:9788170008071.

• Gaffar, AS & Gunjal, B. (2016). Usage of e-Journals among Research Scholars of NIT Rourkela: A Survey. In B. Gunjal and Others (Eds.), Electronic Resource Management in Libraries: Trends, Issues and Challenges (pp. 177-191). New Delhi: Ess Ess Publication. ISBN: 978-81-7000-807-1.


195

Technical Association / SocietiesBPCL of NITR is a member of following associations/library projects:

• E-ShodhSindhu Consortium

• NIT Libraries Consortium

• National Digital Library (NDL), MHRD, India

• World e-Book Library (WEL) till Sep 1, 2017

• Networked Digital Library of Theses and Dissertations (NDLTD)

• South Asia Archive (SAA)

SEMINAR, SYMPOSIA, WINTERSCHOOL, SHORT TERM COURSE / WORKSHOPS CONDUCTED BY CENTRE, PARTICIPATION BY FACULTY MEMBERSSl. Event Name & Place Dates

1. Regional (East-1) Workshop on Institutional Digital Repository for National Digital Library (NDL) of India, Biju Patnaik Central Library, National Institute of Technology Rourkela & IIT Kharagpur at NIT Rourkela.

Jan 13-14, 2017

2. 3rd NIT Librarian’s Meet organized by Biju Patnaik Central Library, National Institute of Technology Rourkela

Jan 12, 2017

3. National Workshop on Library Automation (Koha), Application of RFID and Reference Management Tool (Zotero) (ELPES-5) organized by Biju Patnaik Central Library, National Institute of Technology Rourkela

Dec 5-9, 2016

4. TEQIP-II Sponsored Workshop on Research Support e-Resources, Tools & Techniques and Scholarly-Publishing (RSTSP-2016)

Oct 27, 2016

5. User Awareness Workshop (UAW-12) 2016-17 On Wiley Online Library Oct 10 , 20166. User Awareness Workshop (UAW-11) 2016-17 On Journals of Visualized Experiments: JoVE Sep 28,20167. User Awareness Workshop (UAW-10) 2016-17 on Institute of Civil Engineers, Mary Ann

Liebert, American Society of Microbiology, SPIE Digital Library ProductsSep 21,2016

8. User Awareness Workshop (UAW-9) 2016-17 On EBSCO Products & Services Aug 31,20169. National Workshop on Building Institutional Repository and Website/blog: Dspace and

Wordpress (ELPES-4) organized by Biju Patnaik Central Library, National Institute of Technology Rourkela

Jun 6-10,2016

Participation in Workshop/Training/Conference/Consultancy etc.Institute/Event Name In the Capacity of Name of the StaffPanel Discussion on “Connecting the Dots: Reshaping the Library to Enhance Research Output” organised by Elsevier South Asia eBooks Forum 2017, Radisson Blu Resort, Goa, June 29-30, 2017.

Resource Person Dr.B.Gunjal

Invited talk on “Open Access in Higher Educational Institutes: Issues and Challenges” at 33rd Annual Convention of the Society for Information Science (SIS) & Conference on Open Access: The Road to Freedom, organized by SIS and Library CSIR - Indian Institute of Chemical Biology, Kolkata, April 7-8, 2017.


Invited talk on “Innovative Services in Libraries: Trends, Issues and Challenges” at National Conference on Library Innovations for Excellence (LIFE) - 2017, IISER Pune, February 16-17, 2017.


62nd Indian Library Association International Conference 2017 "Gearing up for the Future: Library Initiatives for Digital India", Organized by Karnataka State Women's University, Vijayapura & ILA New Delhi. February 9-11,2017

Participant Mr. D. P. Tripathi & Mr.D K Pradhan

Panel Discussion on "E-Content 2016: Library Services and Management – A Platform Approach", organised by Informatics, Hotel New Marrion, Bhubaneswar, Nov 24, 2016.


06 days National Workshop on E-Granthalaya and Joomla at Government Women Regional Engineering College, Ajmer (November 8-13, 2016)

Resource Person Mr. D. P. Tripathi


196

Institute/Event Name In the Capacity of Name of the StaffInvited talk on “Libraries and its role in Digital India: A road ahead for Library Professionals” at Librarian’s Day Celebration & Seminar on Role of Library in Digital India, August 7, 2016, organised by Odisha Library Academy and CSIR-IMMT, Bhubaneshwar, Odisha.


Management Capacity Enhancement Programme under TEQIP-II for Administrators of Academic Institutions & Faculty Development Programme under TEQUIP-II on Achieving Academic Excellence, Organized by Indian Institute of Management Raipur, July 25-30, 2016

Participant Mr. D. P. Tripathi & Mr.D K Pradhan

National Workshop on Koha, DSpace and Joomla at Central University of Kerala, Kasargod (June 27 – July 01, 2016)

Resource Person Mr. D. P. Tripathi

85th Residential Programme on "Transformational Leadership & Change Management” organised by Jaipur Productivity Centre, Jaipur from December 19-23, 2016 at Alka Hotel, Udaipur.

Participant Dr.B.Gunjal

Students Activity Centre (SAC) and Technical Clubs

Games and Sports Society:The year started with the orientation programme for the fresher’s by organizing friendly matches in different games involving newly admitted students.

Inter-Hall tournaments in various games were conducted among the halls throughout the year. Vikram Sarabhai Hall of Residence won the group champion in games for the year 2016-17. Weight Lifting, Power Lifting and Best Physique competition was conducted on 15.02.2017. Sri Jeeva S, adjudged “NIT SHREE” in Best physique competition amongst the students of the institute.

Institute’s contingent participated in IIT-BHU sports fest name ‘SPARDHA’ in which Institute Cricket Team (M) outshined as Runners-up. Institute Table Tennis (W) and Chess (M) teams stood as runners-up in the meet. In Athletics, Rakesh Kumar (2 Gold, 1 Bronze) and in Weightlifting Nikhil Kumar (1 Bronze) brought laurels to the Institute.

Inter-NIT Swimming and Cricket Tournament was organized by our Institute from 27th to 30th January’2017. 485 students from 28 NITs participated in the tournament and it was a grand success. Our Institute Cricket Team (M) become Champion of the Tournament. In Swimming (W) Venu Pandit adjudged as an Individual Champion, total 10 medals were bagged by Institute Swimming Men and Women Team.

In All-India Inter-NIT Athletics Weightlifting, Powerlifting and Best Physique competition held at NIT-Kurukshetra from 6th to 8th March’17, Our Institute athletics team also put up a really impressive show bagging 7 medals (Gold-3, Bronze-4) Bronze. Rakesh Kumar won the title of ‘Individual Champion’ men category. Our Institute has Initiated Handball (M) team for the first time which represented Institute at Inter-NIT held at NITK Surathkal. Institute Volleyball (M&W), Kho-Kho (M) and Hockey (M) teams have also participated in All India Inter-NIT tournament held at . Institute Kabbadi (M) and Basketball (M) teams participated in All -India Inter-NIT tournament held at MNIT Jaipur. Institute Kabbadi Team awarded as Runners-up of the tournament. Institute Table Tennis (M&W) and Chess (M) teams participated in IIT-Roorkee Sports Fest “SANGRAM”. Institute TT team (W) secured Third position. Captain Swetaleena Mohapatra won Silver medal individually.

Annual Open swimming competition in various events for students, campus children and institute staff was also conducted during 2016-17 session.

Film and Music Society:Film and Music Society (FMS) is one of the most dynamic societies under the Student Activity Centre (SAC), continually promoting various cultural pursuits amongst students through its seven exiting member clubs. Of these clubs, ‘Third Eye’ and ‘Cinematics’ indulge in photography and film-making, respectively; ‘The Mavericks’, and ‘Synergy’, practice contemporary dance and choreography; ‘HeartBeats’ engages in Indian popular and fusion music, and ‘Euphony’ practices as a rock band, while ‘Drill-n-Bass’ engages in beat-boxing and electronic music. Additionally, a new club for traditional and folk music, called ‘Dotara’, has been inducted this year. The society also organises workshops, shows, and festivals on campus.

A six-day ‘Contemporary Dance Workshop’ was organised for students during September, 2017, conducted by Mr. Sumon Rudra, the eminent danseur and choreographer from Athens, Greece. The participants received intensive training, beginning with basic forms and techniques of various contemporary dance styles, and extending to elements of improvisation and choreography. The workshop seems to have had a positive effect, as reflected in the performance of the students in various dance competitions.


197

The four-day long ‘Multi-ethnic Festival’ was organised during October 26 to 29, 2016. More than 700 students participated in this competitive, cultural extravaganza, showcasing the many hues and shades of the diverse performing arts from across India. The students from foreign countries also had a special slot for their indigenous cultural performances. Various pieces of dance, music, theatre, recitation, et cetera, were composed and practiced by the students, often with help from invited professional trainers. The presentations were evaluated by invited members of jury, who expressed immense praise for the variety and excellence of the students’ endeavours.

‘Roots’ – a Creativity Conclave – was organised from March 31 to April 2, 2017. The event saw more than 500 students participate in workshops, guest lectures, interactive sessions, and exhibitions of Design, Art, Photography, Film-Making, Music, and Literature. With the participation of fourteen invited experts from across the nation, the three day conclave was perhaps the first to offer the students an exceptional exposure of the creative industry and its stalwarts.

The ‘Musical Nite’ was organised on April 1, 2017, at the Dillip Tirkey Stadium. The musical extravaganza featured the emerging Bollywood talent, Ms. Aditi Singh Sharma, and her musical troop. A considerable audience, including students, members of faculty, staff, and their families, enjoyed and appreciated the three-hour show.

An annual subscription for digital television was acquired by FMS, through which private shows for students were conducted at the Bhubaneswar Behera Auditorium. The students were able to enjoy several movies and sporting events, like the IPL matches.

The Third Eye club organised their annual photography exhibition, ‘VIVID’, at Rajendra Mishra Exhibition Hall from March 31 to April 2, 2017, with medium format works of club members as well as other contributors. Spanning various genres of photography like portraiture and candids, landscapes and nature, still-life and abstracts, architecture and street photography, as well as digital montages and creative manipulations, the exhibits received favourable reviews. The Cinematics club returned with wonderful performances from the ‘Pearl 2017’ fest, organised by BITS Pilani at Hyderabad. Club members won first prize in ‘Candid Smiles photography’, and ‘Events Extravaganza photography’, as well as second prize in ‘Digital Art’, and ‘VividH’, over and above certificates of excellence and cash prizes. At the ‘Alcheringa 2017’ fest, organised by IIT Guwahati, club members won the second prize in ‘Director’s Cut’, as well as mementoes and goodies. Members of the club also took up a freelance video-production project for a renowned Group of Hotels for the erstwhile ‘Panthanivas’ chain of the Govt. of Odisha. The project focused on Odisha Tourism, and has been showcased to the Principal Secretary, Tourism and Culture, Odisha. The endeavours of Cinematics have resulted in many film productions, trailers, podcasts, music videos, and after-movies of fests during the past year, eight of which are already available on YouTube. Among them, ‘Altum - An Aerial perspective of NITR’, and ‘REC to NIT - A Nostalgic Journey’ deserve special mention. Two on-campus workshops on design, photography, film-making, and video-editing (organised by Cinematics in collaboration with the DesignTab club), during February 2016 and October 2017, were attended by around 120 students.

The Mavericks club bagged the first prize in ‘Centrifuge dance competition’ at the ‘Spring Fest 2017’ organised by IIT Kharagpur, as well as the first place in the group dance competition of NIT Rourkela’s own fest, ‘NITRUTSAV 2017’. The club also organised a two-day basic dance workshop on campus for 25 participants, during March 2017. The Synergy club returned with cash prizes for securing first position in ‘Terpsichore – Solo and group dance’ event at the ‘Pearl 2017’ fest, organised by BITS Pilani at Hyderabad. Members also won second prize in ‘Footloose – Duet and group dance’ event at ‘NITRUTSAV 2017’. Synergy also organised a one-day dance workshop for students with 40 participants. The members of both the dance clubs also presented choreographed performances during the Institute Foundation Day and the Freshers’ Welcome.

The HeartBeats club once again organised the very popular musical event of ‘Maktub’ during NITRUTSAV 2017, as well as well appreciated performances during Freshers’ Welcome. Notably, members of the club have won four of the coveted top awards during the Multi-ethnic Festival. The Euphony club presented the fourth edition of the popular ‘Euphony Live’ during ‘Innovision 2016’. This year saw Euphony form the officially registered, professional alternative/hard rock band named ‘The Thing with Feathers’, and record the musical album ‘Victory’, which is to be globally released across 150 music platforms on August 15, 2017. The members received an invitation to perform at Hard Rock Café, Bangalore, a three-week contract to perform at Blue Frog, Bangalore, and a two-year full time contract from a leading entertainment company (refused due to academic reasons), all of which bear witness to the level of excellence the club members have achieved. The Drill-n-Bass club, which is just two years old, has presented several performances on campus, as during the Freshers’ Welcome, Multi-ethnic Festival, Innovision, and the Annual meet of the HS Department, and created digital productions like ‘Obsession’ (Trap RnB Music) and ‘Vintage’ (Progressive House). The members have also organised a music production workshop for 35 participants during February 2017.

The Film and Music Society has been rechristened as the Arts and Culture Society with the latest SAC restructuring, and hopes to continue with the promotion of a variety of cultural activities amongst the students.

Technical Society:During the year under review, Technical Society successfully organized the Annual Techno Management Festival, INNOVISION 2016 during 4th-6th November 2016. Before one week of the fest, a pre-Innovision week has organized to give awareness among the new students The Tech fest(Innovision) witnessed massive participation of more than 1000 students from various institutes across the country. Various workshops, exhibitions and competitions were organized during this three day event. In INNOVISION


198

2016 various technical competitions and events such as Death Race, Techibition, Drone Wars, Tread-o-quest; Workshops on AutoCAD, Python, Android app development, Fusion 360, Embedded system and robotics; Exhibitions on Iridescence, Srijan, Digital portable planetarium, Robo Expo by Manov Robot, Stamp and coin Expo, Brainwave controlled robotics etc. have given a great amount of exposure to participants about Science and Technical Education. Motivational speech delivered by Dr. Anil Kakodkar, Padma Vibhusan, Nuclear Scientist, Former Director of BARC, Mumbai and Mr. Rakesh Sidana, Founder of Mericar.com, attracted attention during the festival. Pro-shows by Euphony live; Comedy Night by Kunal rao, Laser Show follows by DJ night had attracted huge participation. The NITR student chapter of Society of Automotive Engineers (SAE), Cyborg, CEST club, ASME, PLUGED IN were very active during the year. SAE, Cyborg club participated in a number of national level competitions and also won several prizes. One of our student Mr. Rohit Suri represented NIT Rourkela in the President meeting for Innovation during March 2017 at Rashtrapati Bhawan.

Literary and Cultural Society:Continuing with the tradition of living up to its fabulous reputation we have been again excellent on various spheres of achievements. Without being exhaustive some of the major and worth mentioning achievements were the following.

1) The Literary and Cultural Society has conducted a fifteen-day workshop in theatre arts by the well-known central Akademi awardee Shri. G.S. Chaini.

2) There was also a four-day dance workshop, both contemporary and traditional.

3) The Society has successfully conducted a three-day workshop in visual arts during the NITRUTSAV 2017 which included painting and sculpture.

4) There was a photography exhibition cum workshop which was attended by a lot of student enthusiasts and was quite popular amongst the student populace.

5) The society whole-heartedly supported regular organization of classes on traditional and folk dances throughout the calendar year.

6) Besides all these activities, the students have made the flag of the society fly high by bagging awards in events held in IIT Bombay (mood indigo) and theatre events in IIT Kharagpur.

7) There were also a few commendable performances in the state level inter college competitions in performing arts. We look forward to keep up this rich tradition even during this academic calendar. Dr. D. Choudhur & Dr. A.K. Rath VPs Lit. & Cult. Society.

Highlights of the Year 2015-16

Members of Student Activity Centre 2015-16:Prof. D. R. K. Parhi - Dean, SWProf. J. Bera - President, SACProf. V. K. Reddy - Vice President, Film and Music SocietyProf. A. Mukherji - Vice President, Film and Music SocietyProf. B. Mallick - Vice President, Games and Sports SocietyProf. S. K. Sahoo - Vice President, Games and Sports SocietyProf. Susmita Das - Vice President, Literary and Cultural SocietyProf. D. Choudhuri - Vice President, Literary and Cultural SocietyProf. A. K. Swain - Vice President, Technical SocietyProf. S. N. Das - Vice President, Technical Society

Director’s NomineeName: Mohit Gupta (8596049882)Roll No.: 114MM0643

Name: Payal Agrawal (7077105338)Roll No.: 114CH0322


199

Dean’s Nominee1. Film and Music Society

Name: Swagat Mohanty Roll No.: 114CH0073

Name: Poorva Singh Roll No.: 114CE0434

2. Literary and Cultural Society

Name: Kumar Shaswat Roll No.: 714CS2121

Name: Punyaja Dash Roll No.: 114EC0026

3. Games and Sports Society

Name: Sriya Sainath Roll No.: 115CS0239

Name: Debabrata Mohapatra Roll No.: 115ME0450

4. Technical Society

Name: Anup Kumar Mittal Roll No.: 114BT0191

Name: Chandan Barik Roll No.: 114CS0092

General ConvenorPallerla Rajanish Reddy ([email protected])

Joint General ConvenorB. Narsing Rao (7077105348)


200

HEALTH CENTRE

InfrastructureThe Institute maintains a dispensary which serves the employees, their dependents, students and the non-entitled patients on outpatient basis. The dispensary has got its separate building and is situated centrally in the residential area.

At present it is manned by one full time Senior Medical Officer, two Medical Officers (including one lady medical officer) & four supporting staffs (one Dresser, one Attendant, one Stipendiary assistant and one Sweeper). The doctors reside in the campus.

Facilities ProvidedMedicines are disbursed free of cost on doctor’s prescription, generated online through M/s Apollo Pharmacy present just beside the dispensary.

Each of the two Medicine specialists visit once in a week. Gynecology and Obstetrics specialist and Cardiologist also visit health center once in a week.

Health center maintains a dressing room where minor surgeries are also taken care of.

During emergency patients can contact medical officers 24 x 7 through emergency medical help-line number. For resuscitation health center also maintains nebulizer and oxygen cylinder.

There are two primary referral hospitals i.e. Ispat General Hospital (IGH), Rourkela & Community Welfare Society Hospital (CWSH), Jagda where patients are referred for specialist’s opinion, pathological tests.

All indoor facilities are also provided there free of cost.

Patient StatisticsHealth center registered approximately 62070 visits during the last academic year. On recommendation of IGH specialists the patients are referred to outside hospital for specialized treatments either to the tied up hospitals or other reputed hospitals as per need e.g 90 such patients were referred during last academic year.

Approximately not more than 6670 & 1165 cases were referred to CWSH & IGH respectively for specialist OPD or in emergency.435 & 83 cases were admitted in CWSH & IGH respectively. 4974 & 49 cases were referred for investigation to CWSH & IGH respectively.

Health center periodically organizes various free health camps like Vision testing camp, Spirometry camp, Thyroid profile and Lipid profile camps for the benefit of beneficiaries. Pulse Polio Immunization camp is organized as per government notification with the help of Chief Medical Officer, Rourkela. Blood donation camps are also organized to meet the social responsibility.

Important information:-The dispensary provides service 6 days a week (Except on Sunday).

The working hours of the dispensary is as follows:

Monday to Saturday (FN) 9.00AM to 12.00 Noon & (AN) 4.00PM to 7.00PM

National Holidays & Holi: Fully Closed

Institutional Holidays: 9.00AM to 12.00 Noon

STAFF POSITIONThe institute functions under the leadership of Director. The number of faculty position sanctioned is 485 and 534 non-teaching posts have been sanctioned for the institute. Out of 534 non-teaching employees, 37 positions are at the level of officers and remaining 364 positions are of non-officers cadre, the distribution of faculty sanctioned for different departments is presented at Table 3 and the distribution of different officers along with designation is presented in Table 2. Non teaching employees are grouped under technical (higher and lower), admin (higher and lower) and support staff. Different designation along with sanctioned post for each is presented in Table 4.


201

Table 15: Sanctioned manpower of NIT Rourkela

Category Sanctioned Strength People-in-position as on 30.06.2017

Director 01 01Teaching Staff 485 283Non-Teaching Staff 534 364Total 1019 647

Administration and Scientific officer positionsTable 16: Details of sanction of officer posts and position held as on 30th June 2017.

Cadre Post Pay ScalePB GP/AGP Sanctioned In-Position

Officers (Group A)

Registrar 4 10000 1 1

Deputy Registrar 3 7600 4 2

Assistant Registrar 3 5400 7 6

Librarian 4 10000 1 0

Deputy Librarian 3 8000 2 1

Assistant Librarian 3 6000 4 4

Principal SAS Officer 4 10000 0 0

Senior SAS Officer 3 8000 2 0

SAS Officer 3 6000 4 3

Principal Scientific/Technical Officer 3 7600 2 1

Senior Scientific/Technical Officer 3 6600 4 2

Scientific/Technical Officer 3 5400 7 4

Superintending Engineer 4 8700 0 0

Executive Engineer 3 6600 2 0

Engineer/Asst. Exec.Engineer 3 5400 5 3

Senior Medical Officer 3 7600 1 1

Medical Officer 3 5400 2 2

Security Officer 3 5400 1 1

TOTAL 49 31


202

Teaching Staff (Faculty)The Institute currently has 485 faculty position sanctioned. Details of number of faculty members in each department are presented in Table 3.

Table 17: Details of number of faculty members as on 30th June 2017 (Department wise)

Name of the Department

Professor Associate Professor Assistant Professor Total Faculty

in Position

Total Sanctioned

postsSanctioned Strength

In Position

Sanctioned Strength

In Position

Sanctioned Strength

In Position

Bio-Medical Engineering

69

01

138

02

278

13 16

485

Civil Engg. 06 07 09 22Chemical Engg. 01 05 07 13Ceramic Engg 02 05 07 14Comp. Sc.Engg. 02 02 14 18Electronics Comm. Engg. 03 05 14 22Electrical Engineering 03 04 13 20Industrial Design 01 00 05 06Mechanical Engineering 07 08 11 26Metallurgical &.Materials Engg. 03 04 13 20Mining Engg. 03 03 02 08Food Processing Engg 00 00 04 04Planning & Arch. Engg. 00 00 05 05Chemistry 00 06 14 20Life Science 00 01 12 13Mathematics 03 03 09 15Physics 01 05 10 16Earth & Atmospheric Science 00 00 08 08School of Management 00 02 03 05Hummanities & Social Sc 00 01 11 12Total 69 36 63 184 283 485

Non-Teaching Staff (Non – faculty)Summary of Non-teaching staff position sanctioned.

Table 18: Different post of supporting staff in NIT Rourkela

Cadre Post Pay Scale

PB GP/AGP Sanctioned In-Position

TECHNICAL (Higher Cadre)

Tech. Asst. / SAS Asst. / Jr. Engr./LIA 2 4200 58 59

Sr. TA / Sr. SAS Asst. / Asst. Engr./LIA 2 4600 44 11

TA (SGII)/SAS Asst. (SGII)/AE(SGII) 2 480043 22

TA (SG I)/ SAS Asst. (SG I)/ AE(SG I) 2 5400

TOTAL 145 92

ADMIN. (Higher Cadre)

Supdt. / Accountant / Secretary 2 4200 14 15

Sr. Supdt. / Accountant / Secretary 2 4600 11 9

Supdt./Accountant/Secretary (SG II) 2 480011 2

Supdt./Accountant/Secretary (SG I) 2 5400

TOTAL 36 26


203

Cadre Post Pay Scale

PB GP/AGP Sanctioned In-Position

TECHNICAL (Lower Cadre)

Technician / Lab/Work Asst. 1 2000 58 52

Sr. Technician / Lab/Work Asst. 1 2400 44 8

Technician / Driver/Lab/Work Asst. (SG II) 1 2800

43 17Technician / Driver/Lab/Work Asst. (SG I) 2 4200

Pharmacist (SG-II) 2 4600

Pharmacist (SG-I) 2 4800

TOTAL 145 77

ADMIN. (Lower Cadre)

Jr. Assistant 1 2000 34 9

Sr. Assistant / Stenographer 1 2400 26 1

Assistant (SG II) / Sr. Stenographer 1 2800

25 44Assistant (SG I) / Stenographer (SG II) 2 4200

Stenographer (SG I) 2 4600

TOTAL 85 54

SUPPORTING

Security Guard / Attnd. / Mali / CT 1 1800 30 0

Sr. SG / Attnd. / Mali / Care Taker 1 1900 22 37

SG / Attnd. / Mali / Care Taker (SG II) 1 200022 47

SG / Attnd. / Mali / Care Taker (SG I) 1 2400

TOTAL 74 84

TOTAL OF ALL NON-TEACHING STAFF 485 333

The details of Fresh Appointments (Regular), Staff Relieved on Retirement, Teaching staff relieved on Resignation, Non-Teaching staff relieved on resignation, staff relieved on Voluntary retirement and staff expired in the academic year 2015-16 are presented in Annexure-4, Annexure-5, Annexure-6, Annexure-7, Annexure-8, Annexure-9 respectively.

Non-Academic Staff (Non-Teaching: The institute has 309 non-teaching staffs and the details of the employees are presented in Annexure-11. Training Status: The institute has sponsored for training and learning in the academic year and the details are presented in Annexure-12.

CONVOCATIONThe 14th convocation of NIT Rourkela was held on 21st January 2017. Padma Shri Alur Seelin Kiran Kumar, Secretary, Department of Space, Chairman, Space Commission and Chairman, ISRO was the Chief Guest on the occasion. Chairman of the Board of Governor and Director of the Institute Prof. Animesh Biswas entwined the occasion. The Director of the institute presented the Director’s Report highlighting the report of the institute.

The institute conferred Ph. D. degree on 103 individuals. M. Tech. (Research) was awarded to 27 individuals. Degrees were conferred for M. Tech., M. Sc., MA (Development Studies), MBA and B. Tech. institute academic Medals were also awarded of the occasion. The detail of the academic award winners is presented in Annexure–12, Annexure–13, Annexure–14, Annexure–15 and Annexure–16.

The course wise details of students awarded degree in the occasion is presented in Figure–1.

B. Tech. 532M. Tech. 461M. Tech. (R) 27Ph. D. 103M. Sc. 48Int. M. Sc. 61MBA 32MA 15


204


205

Major Equipment / Tools Purchased during the Financial Years 2016-17During the financial year 2016-17, the institute added the infrastructure interms of laboratory equipment. Major equipments that have been added along with department and in cost in presented in Table 18.

Table 19: Major equipments purchased during the academic year

Name of the Equipment Department Cost of the EquipmentVedio switcher,a/v recorder,professional display led monitor,audio amplifier TEL H9,93,231.00Analog dual 3.3 volt developement kit etc EC H7,88,613.00

Laboratory sale modified atmoshphere pakaging system digital gaxmixer FP H7,06,580.00Stereo zoom student grade microscope ER ¥618,630.00Solid works premium,solid works simulation premium etc. CC H1,307,984.00

10/100/1000/base-t sfp modul,cat25 cable 100m link ,10 gigabit ethernet sfp etc. CC H648,156.00Viscometer FP H733,259.00Premium support(24*7) CC H575,000.00

Cnc tu4rning centre TR H1,196,892.00Systat 13 software one hundred user perpectual |(lifetime)licence (network licence) CC H1,661,625.00

Automatic formfill & seal machine (for solid) & for milk shrink tunnel machine ,continuos band sellor machine

FP H6,25,468.00

Vp grade of ibm spss from version 20 to vession 24 etc CC H1,004,694.00

Elix refer skit in progard ts2.....etc CR H597,594.00Iuniaxial icp accelerometer ID H868,508.00Mat lab campus ID H6,782,400.00Ultra clean experimental TQ-II BM H6,425,144.00Pm dual; 1gp supply cbl 1gpsx @-1gp CR H1,007,709.00

Znc die sinking edm machine ME H7,27,150.00Thermal imaging camera ME H771,519.00

Additive manufacturing machine ME H1,740,828.00Modernising advanced instrumentation laboratory TQ-II-EE H5,342,150.00Digital storage osciloscope EE H6,49,215.00

Summit x440-48t,pwr cord etc CC H2,442,427.00

Head space gas analyser with computer FP H1,105,374.00Mixed dominoscilloscope TQ-II/EE H5,41,212.00

Heat transfer through composite walls, thermal conductivity of liquids etc CHH633,078.00

Microsoft cloud software for 1 year CC H15,19,248.00Acrobat proffesional campus wide lecence for academic use for students & faculty & technical staff count aound 350

CC H1,922,944.00

International Relations and CollaborationThe institute is in a constant pursuit for international collaboration, over this academic year international collaboration has been signed with following Universities.

• San Diego State University, California, USA (www.sdsu.edu)• University of South Carolina, Columbia, USA (www.usc.edu)• University of Cape Town, Cape Town, South Africa (www.uct.ac.za)• Mondragon Unibertsitatea, Mondragon, Spain (www.mondragon.edu)• Konkuk University, Seoul, South Korea• University of Massachusetts Lowell, USA• The Netherlands Inter Disciplinary Demographic Institute, Netherland• Faculty of Automation and Computer Engineering of Novosibirsk State Technical University, Russia• Ngnee Ann Polytechnic, Singapore• Ecole Centrale de Nantes (ECN), France• Technische Universität München (TUM), Germany


206

• Escuela Técnica Superior de Ingenieros, Universidad de Sevilla• Tallinn University of Technology (TUT)• Politecnico di Milano (POLIMI), Italy• Politecnico di Torino (POLITO), Italy• Warsaw University of Technology (WUT), Poland• Instituto Superior Técnico (IST), Portugal• Czech Technical University (CTU), Prague, Czeck Republic• Cardiff Met University (CMU), Cardiff, UK• Georg-August- Universität Göttingen, Germany• University of Oxford, United Kingdom• Ghent University, Belgium• Groningen University, The Netherlands• Universitat Politècnica de València, Spain• Uppsala University, Sweden• University of Warsaw, Poland• University Tunku Abdul Rahman, Malaysia

Large number of faculty members has visited foreign universities for collaborative discussion, conference paper presentation and joint research work. The detailed list is presented at Table 20.

Table 20: Participation of faculty members on collaboration with International Universities and attending conferences (International Travel only)

Sl. No.

Name & Designation

Deptt Duration Training/Conference

Place of Training / Conference

Country

1 Prof. G. K. Panda,Professor

MA 27/06/16 to 02/07/16

Fibonnaci Numbers and its Applications

Caen France

2 Prof. Nihar Ranjan Mishra,Asst. Professor

HS 10/07/16 to 14/07/16

3rd ISA Forum of Sociology

Vienna Austria

3 Prof. Anshuman PatraAsst. Professor

MM 03/07/16 to 08/07/16

ISMANAM 2016 Sendai Japan

4 Prof. Swapan Kumar Karak,Asst. Professor

MM 03/07/16 to 08/07/16


5 Prof. Debasis Chaira,Asst. Professor

MM 03/07/16 to 08/07/16


6 Prof. Paresh G. Kale,Asst. Professor

EE 25/07/16 to 27/07/16

ICGET 2016 Kuala Lumpur Malaysia

7 Prof. Tuhin Subhra Maparu,Asst. Professor

PA 10/07/16 to 15/07/16

Transport Research Shanghai China

8 Prof. Sabyasachi Mishra,Asst. Professor

FP 17/07/16 to 20/07/16

ASABE 2016 Florida USA

9 Prof. P. Balasubramanian,Asst. Professor

BM 25/07/16 to 27/07/16

ICEEA 2016 Kuala Lumpur Malaysia

10 Prof. K. K. Khatua, Asso. Professor

CE 10/07/16 to 14/07/16

River Flow 2016 St. Louis USA

11 Prof. Santanu Saha Ray,Asso. Professor

MA 25/07/16 to 27/07/16

Global Conference on Applied Physics and

Mathematics

Rome Italy

12 Prof. Mahabir Panda,Professor

CE 27/07/16 to 29/07/16

MAIREPAV8 Singapore Singapore

13 Prof. U.C. Pati,Asso. Professor

EC 03/08/16 to 06/08/16

IEEE EmergiTech 2016

Mauritius Mauritius


207

Sl. No.

Name & Designation



Country

14 Prof. Simanchal Panigrahi,Professor

PH 08/08/16 to 11/08/16

Advances in Functional Materials

International Conference

South Korea South Korea

15 Prof. Suryanarayan Dash,Asst. Professor

PH 08/08/16 to 11/08/16

AFM 2016 South Korea South Korea

16 Prof. Jugal Mohapatra,Asst. Professor

MA 15/08/16 to 19/08/16

BAIL 2016 Beijing China

17 Prof. D. Behera,Asso. Professor

PH 08/08/16 to 11/08/16

AFM 2016 Jeju Island South Korea

18 Prof. Ramakrishna BiswalAsst. Professor

HS 26/08/2016 15th Tiber Symposium on Psychology and

Economics

Tilburg The Netherlands

19 Prof. Basudatta Sarkar,Asst. Professor

PA 02/09/16 to 16/09/16

52nd ISOCARP Congress

Durban South Africa

20 Prof. S. Murugan,Asso. Professor

ME 09/09/16 to 11/09/16

Clean Energy Technology 2016

Hong Kong China

21 Prof. R. Jayabalan,Asst. Professor

LS 18/09/16 AIAC International Expert Review Panel

for Kombucha in Ethanol

Dallas, Texas USA

22 Prof. Bikash Ranjan Mishra,Asst. Professor

HS 24/10/16 to 25/10/16

ICEFR 2016 Paris France

23 Prof. Supratim Gupta,Asst. Professor

EE 20/10/16 to 22/10/16

IEEE UEMCON 2016 USA USA

24 Prof. Saurav Chatterjee,Asso. Professor

CY 12/10/16 to 28/10/16

Indo German DST-DAAD Project

Essen Germany

25 Prof. K. C. Patra,Professor

CE 03/10/16 to 07/10/16

Exposure visit to Japan in regards

to dam safety management issues related to seismic

hazards

Japan Japan

26 Prof. Sanjeeb Mohanty,Asst. Professor

EE 13/11/16 to 16/11/16

ICEMS 2016 Chiba Japan

27 Prof. Krishna Dutta,Asst. Professor

MM 08/11/16 to 11/11/16

AMPT Conference 2016

Kuala Lumpur Malaysia

28 Prof. Natraj Yedla,Asst. Professor

MM 08/11/16 to 11/11/16

AMPT Conference 2016

Kuala Lumpur Malaysia

29 Prof .Debarjyoti Choudhuri,Asst. Professor

MA 15/11/16 to 15/12/16

Research Collaboration

Averio Portugal

30 Prof. Rupam Dinda,Asso. Professor

CY 06/11/16 to 09/11/16

V10 Taipei Taiwan

31 Prof. P. M. Khilar,Asst. Professor

CS 22/11/16 to 25/11/16

IEEE TENCON 2016 Marina Bay Sands

Singapore


208

Sl. No.

Name & Designation



Country

32 Prof. Snehashish Chakraverty,Professor

MA 20/11/16 to 04/12/16

Symposium on Statistical &

Computational Modelling with

Application

University of Kelaniya

Sri Lanka

33 Prof. Somnath Maity,Asst. Professor

EE 28/11/16 to 01/12/16

IEEE PES Innovative Smart Grid Tech

2016

Melbourne Australia

34 Prof. Bidyadhar Subudhi,Professor

EE 22/11/16 to 25/11/16

IEEE TENCON 2016 Singapore Singapore

35 Prof. Bhatu Kumar Pal,Professor

MN 07/11/16 to 11/11/16

16th World Lake Conference

Bali Indonesia

36 Prof. Poonam Singh,Asso. Professor

EC 22/11/16 to 25/11/16

IEEE TENCON 2016 Singapore Singapore

37 Prof. Suchismita Chinara,Asst. Professor

CS 11/11/16 to 13/11/16

International Conference on

Sensing Technology

Nanjing China

38 Prof. Rajesh Kumar Prusty,Asst. Professor

MM 27/11/16 to 30/11/16

AM 2016 Bangkok Thailand

39 Prof. Snehanshu Pal,Asst. Professor

MM 27/11/16 to 30/11/16

AM 2016 Bangkok Thailand

40 Prof. Syed Nasimul Alam,Asst. Professor

MM 27/11/16 to 02/12/16

Materials Research Society Fall Meetings

& Exhibits

Boston USA

41 Prof. Ashok Kumar Turuk,Asso. Professor

CS 04/12/16 to 07/12/16

BIOSMART 2016 Dubai UAE


LS 06/12/16 to 30/12/16

Research Collaboration

Cadiz Spain

43 Prof. S. Murugan,Asso. Professor

ME 05/12/16 to 06/12/16

Bioenergy at Institute of Water and Power

Tehran Iran

44 Prof. Shishir Kumar Sahu,Professor

CE 04/12/16 to 06/12/16

ICMES 2016 and ICFMS 2016

Hong Kong Hong Kong

45 Prof. Binod Bihari Sahu,Asst. Professor

LS 14/01/17 to 18/01/17

Plant and Animal Genome XXV Conference

San Diego USA

46 Prof. Rama Chandra Pradhan,Asst. Professor

FP 08/01/17 to 09/01/17

ICGFS 2017 Singapore Singapore

47 Prof. Amit Rai,Asst. Professor

PH 23/01/17 to 26/01/17

90 years of Quantum Mechanics

Singapore Singapore

48 Prof. Subrata Kumar Panda,Asst. Professor

ME 05/01/17 to 07/01/17

2017 International Conference on Advances

Technologies in Manufacturing and Materials Engineering

Bangkok Thailand


209

Sl. No.

Name & Designation



Country

49 Prof. Aditya Kumar,Asst. Professor

CH 03/02/17 to 06/02/17

8th International Conference on

Mechanical & Intelligent

Manufacturing Technologies

Cape Town South Africa

50 Prof. P. K. Sahu,Asso. Professor

EE 25/02/17 to 26/02/17

ACCN 2017 Bangkok Thailand

51 Prof. Suchismita Chinara,Asst. Professor

CS 22/03/17 to 24/03/17

HP3C 2017 Kuala Lumpur Malaysia

52 Prof. Hara Mohan Jena,Asst. Professor

CH 14/03/17 to 15/03/17

ICEC 2017 London UK

53 Prof. Abanti Sahoo,Asso. Professor

CH 14/03/17 to 15/03/17

ICESSE 2017 London UK

54 Prof. Samit Ari,Asst. Professor

EC 10/03/17 to 12/03/17

CSPA 2017 Penang Malaysia

55 Prof. K. P. Maity,Professor

ME 27/03/17 to 30/03/17

WCMNM 2017 Kaohsiung Taiwan

56 Prof. Rupam Dinda,Asso. Professor

CY 10/04/17 to 13/04/17

ISACS: Challenges in Inorganic Chemistry

– 2017

University of Manchester

UK

57 Prof. B. B. Biswal,Professor

ID 24/04/17 to 25/04/17

19th International Conference on

Mechanical Engineering

Boston USA

58 Prof. B. B. Biswal,Professor

ID 01/04/17 to 09/04/17

Attending a HERITAGE

Network-1 Meeting

Nantes France

59 Prof. Rabi Narayan Behera,Asst. Professor

CE 08/05/17 to 09/05/17

ACE 2017 Singapore Singapore

60 Prof. Kishna Kishore Osuri,Asst. Professor

ER 20/05/16 to 31/07/16

Visitng Scholar Purdue University

USA

61 Prof. S. Chakraverty,Professor

MA 17/05/17 to 19/05/17

ICCMS 2017 Colombo Sri Lanka

62 Prof. Debarjoyti Choudhuri,Asst. Professor

MA 21/05/17 to 22/05/17

ICAPDE 2017 Berlin Germany


LS 31/05/17 to 02/06/17

MEICRE 2017 Chiang Mai Thailand

64 Prof. Poonam Singh,Asso. Professor

EC 04/06/17 to 07/06/17

VTC 2017 – Spring Sydney Australia

65 Prof. S. K. Pratihar,Asso. Professor

CR 18/06/17 to 23/06/17

ICMAT 2017 Suntec Singapore

66 Prof. Bibhuti Bhusan Nayak,Asso. Professor

CR 18/06/17 to 23/06/17


67 Prof. Aparna Mondal,Asso. Professor

CR 18/06/17 to 23/06/17


68 Prof. P. Balasubramanian, Asst. Professor

BM 18/06/17 to 21/06/17

Algal Biomass, Biofuels and

Bioproducts 2017

Florida USA


210

With a target to scale up research in practical direction, the Institute has signed MOU with large number of industry in India. A comprehensive list of these include –

• Ispat General Hospital, Rourkela, Odisha

• Dalmia Institute of Scientific and Industrial Research (DISIR), Rajgangpur, Odisha

• Welpsum Corporation Limited, Gujrat

• Department of Atomic Energy (DAE), Government of India, Mumbai

• Altera Semiconductor India Private Limited

• Regional Research Laboratory, Bhubaneswar, India

• Divine Life Society, Uttarakhand, India

HALLS OF RESIDENCEThe Institute is essentially a residential one and provides hostel accommodation to all the boarders. Separate Hall accommodation is available for lady students. It is mandatory for all the boarders to stay in the Halls. However, a student may be permitted to live with his/her parents or local guardian at Rourkela after obtaining permission from competent authority during the beginning of each semester. A Hall of Residence in NIT Rourkela is in true sense a home away from home. The rules followed in the Halls of Residence are basically whatever the boarders have learnt in their Schools, Colleges and home. However, there is a manual of Hall of Residence which serves as a guiding principle. There are also two display boards near the entrance of each Hall of Residence. The content of one board describes the 10 points protocol to succeed in NIT Rourkela. The other board contains the list of essential mobile phone numbers for contact at any point of time. For the convenience of the boarders, each Hall has its own night canteen, fruit juice center and xerox cum stationery shop. In the Hall of Residence area, facilities like ATM, four students’ restaurants, stationery shop, one saloon and one cycle repairing shop are provided. Room allotment in the Halls is done in such a way that students from different regions of the country freely intermingle with each other depicting national integration. In true sense, hostel area is a real picture of India where all boarders from different parts of country stay together.

The institute has seven boys, two girls and one family hostel. The statistics of rooms & boarders of each Hall are as follows.

Sl. Name of the Hall No. of Rooms No. of Boarders1 S.S. Bhatnagar Hall 145 145 Families

2 M. Visvesvaraya Hall 255 408

3 G.D. Birla Hall 322 528

4 Dhirubhai Ambani Hall 300 375

5 M.S. Swaminathan Hall 407 481

6 C.V. Raman Hall (For Ladies) 696 840

7 K.M. Shaw Hall (For Ladies) 164 337

8 Vikram Sarabhai Hall 1024 1198

9 Homi Bhabha Hall 396 366

10 Satish Dhawan Hall 507(3 Blocks are under construction)

629

Halls of Residence Administration:The Hall Management Council (HMC) comprising of Wardens, Asst. Wardens and elected student representatives headed by Chief Warden of Halls are responsible for management of Hall facilities. The HMC meeting is conducted every month to discuss various issues related to all activities of Halls and the resolutions taken in the meeting are implemented. The committee functions under the guidance and direction of Director. The Hall Management Council members for academic session 2016-17 were as follows:

• Prof. S.K. Patel,Chief Warden (from 01.07.2016 to 10.01.2017)• Prof. M. R. Barik,Chief Warden (continued from 11.01.2017)• Prof. A. Thirugnanam, Warden (Shanti Swarup Bhatnagar Hall of Residence)• Prof. M. R. Tripathy,Warden (M. Visvesvaraya Hall of Residence)• Prof. M. Jayaprakash, Asst. Warden (M. Visvesvaraya Hall of Residence)• Prof. A. C. Pradhan,Warden (G.D Birla Hall of Residence)• Prof. S. Kayal, Asst. Warden (G.D Birla Hall of Residence)• Prof. P. Mahanandia, Warden (Dhirubhai Ambani Hall of Residence)• Prof. Krishna Dutt,Asst. Warden (Dhirubhai Ambani Hall of Residence)• Prof. R. Jayabalan,Warden (M.S. Swaminathan Hall of Residence)


211

• Prof. A. K. Mondal,Asst. Warden (M.S. Swaminathan Hall of Residence)• Prof. (Mrs.) Archana Mallick,Warden (C.V. Raman Hall of Residence)• Prof. (Ms.) Surabhi Verma,Asst. Warden (C.V. Raman Hall of Residence)• Prof. V. Sivakumar,Warden (Homi Bhabha Hall of Residence)• Prof. Arun Choudhury,Asst. Warden (HomiBhabha Hall of Residence)• Prof. (Mrs.) Monalisa Mishra, Warden (Kiran Mazumdar Shaw Hall of Residence)• Prof. (Ms.) Rekha S,Asst. Warden (Kiran Mazumdar Shaw Hall of Residence)• Prof. Jugal Mohapatra,Warden (Vikram Sarabhai Hall of Residence)• Prof. Snehanshu Pal, Asst. Warden (Vikram Sarabhai Hall of Residence)• Prof. Suman Jha,Warden (Satish Dhawan Hall of Residence)• Prof. Natraj Yedla,Asst. Warden (Satish Dhawan Hall of Residence)• Mr. Rajesh Beuria,Technical Assistant

The student members of HMC were as follows:

• Mr. Jitendra Ku. Rout, Gen. Secy. (Shanti Swarup Bhatnagar Hall of Residence)• Mr. Pushpdant Jain,Gen. Secy. (M. Visvesvaraya Hall of Residence)• Mr. Rahul Choudhury ,Gen. Secy. (G.D Birla Hall of Residence)• Mr. SujitSangramSahu,Gen. Secy. (DhirubhaiAmbani Hall of Residence)• Mr. Sachin Tiwari,Gen. Secy. (M.S. Swaminathan Hall of Residence)• Miss. Ipsita Bohidar,Gen. Secy. (C.V. Raman Hall of Residence)• Mr. B. Naveen Acarya,Gen. Secy. (HomiBhabha Hall of Residence)• Miss. Sovana Rout,Gen. Secy. (Kiran Mazumdar Shaw Hall of Residence)• Mr. Subrat Ku. Bhuyan,Gen. Secy. (Vikram Sarabhai Hall of Residence)• Mr. Chitranjan Kumar ,Gen. Secy. (Satish Dhawan Hall of Residence)

In each Hall of Residence, there is a Hall Executive Council comprising of Wardens, Asst. Wardens and elected student representatives like General Secretary, Cultural Secretary, Maintenance Secretary, Mess Secretary, Environment Secretary, Sports and Games Secretary. All policies related to the concerned Hall are discussed in the HEC before implementation. In each semester, the General Body Meeting of each Hall is organized where boarders participate and give different suggestions for the improvement of Hall Management.

The First year male students are accommodated only in G.D Birla Hall & M.V Hall of Residence. Hostel messes are run by caterers selected by a committee with an open tender and managed by nominated student representatives under the overall supervision of Wardens and Asst. Wardens of concerned Halls. Both vegetarian and non-vegetarian foods are served to the boarders inside the mess. The elections for the different posts for Hall Executive Council (HEC) are being elected by the boarders through online voting.

Addition of new facilities:A new gymnasium facility is added in MV Hall. A star rated restaurant called Dosa Plaza was opened in between MS and HB Hall. Window curtains are provided to DBA, MSS, HB, & VS Hall.


212

Hall Day Celebration and other activities of various Halls:Various multidimensional functions like cultural, literary, sports & games were organized by each Hall of Residence throughout the year. In addition each Hall celebrated Foundation Day, Garden Feast and Cultural Night & Hall Day where students showed their talents in singing, dancing, classical music & laughter shows etc. Various programs were conducted on the Hall Day, which included games, quiz, essay writing, debate etc. The students from each Hall were awarded prizes, certificates and mementos on the basis of overall performance, in different competitions held during the whole year. All the Halls also chose their respective Best Persons, Best Valuable Boarders and Best Artists (Fine Art/Cultural).

The Grand Farewell Function was organized by the Hall Management Council to bid farewell to the final year students on 12.04.2017 (Wednesday). To keep the memory of Hall of Residence all outgoing students were given mementos and requested them to put their signature in a big plastic board which was kept in Chief Warden’s office for years to come. A souvenir video was made containing the pictures of all the final year students and displayed at the Grand Farewell. All students of the institute attended the function and conveyed best wishes to the final year students for a grand success in their future life.

Annexure 1: SIRE or Practical Training undertaken by students in industries during May-July, 2016

Sl. No. Name of Industries/Organizations No. of students sponsored

1 ACE, RST, Holderlinstr, Siegen 2

2 Accenture, Ahmedabad, Gujrat 1

3 ACI Oil (P) Limited, Aksampur 1

4 Aditya Birla Insulator, Halol, Gujrat 1

5 Aditya Care Hospital, Bhubaneswar 2

6 AIIMS, New Delhi 1

7 Amdocs Dev. Centre India (P) Ltd. Pune 4

8 Analytical & Environmental Services, Vadodara 1

9 Apollo Hospitals, Bhubaneswar 1

10 Aptransco Dairy Farm, Visakhapatnam 1

11 Aurobindo Pharma Ltd., Andra Pradesh 1

12 ARTTC, BSNL, Ranchi 1

13 Architechture & Beyond (A&B), Surat, Gujrat 1

14 ARO International-CFCT 1

15 Ashok Leyland, Kumudepalli, Karnataka 1

16 Asian Paints Limited, Greater Noida 1

17 Auionpro Solutions Limited, Pune 3

18 Bajaj Auto Limited, Waluj, Aurangabad 2

19 Balco Vedanta Limited, Chhatisgarh 1

20 Bhubaneswar Irrigation, Odisha 6

21 BCCL, Dhanbad, Jharkhand 2

22 Bhabha Automic Research Centre, Mumbai 4

23 BHEL, Uttar Pradesh 6

24 BHEL, Haridwar 2

25 BHEL, Hyderabad 3

26 BHEL, Bangalore 1

27 Bharat Dynamic Limited, Bhanur, Medak 1

28 Bharat Coking Coal Ltd., Dhanbad 1

29 Bharat Sanchar Nigam Ltd., Deoghar 1

30 Bhilai Steel Plant, Chhatisgarh 1

31 Bhusawal Division, Centre Railway 1

32 Canal Division, Water Resources, Bhubaneswar 3

33 Central Institute of Mining & Fuel Research, Dhanbad 1

34 Central Mechanical Engineering Research Institute, Durgapur 1


213


35 Central PWD, VCD, Visakhapatnam 1

36 Central Rice Research Institute, Cuttack, Odisha 2

37 Central for Cellular & Molecular Biology, Hyderabad 1

38 Cerner Healthcare Solutions Pvt. Ltd., Bangalore 7

39 Cherry Paints & Polymers Pvt. Ltd., Indore 1

40 Communication Technologies Pvt. Ltd., Bangalore 1

41 Computer Education Division, ECIL, Hyderabad 1

42 CSE, NIT Rourkela 3

43 CSIR, IMMT Bhubaneswar 33

44 CSIR, Lucknow 1

45 CSIR, NML, Jamshedpur 2

46 CSIR, National Chemical Laboratory, Pune 1

47 Calderys India Refractories Limited, Katni, Madhya Pradesh 1

48 CSIR, Central Glass & Ceramic Research Institute, Kolkata 2

49 Community Welfare Society Hospital, Jagda, Rourkela 5

50 Carleton University, Ottawa 1

51 Damodar Velley Corporation, Bokaro 1

52 Defence Research Development Laboratory, Hyderabad 2

53 Deptt. Chemistry, NIT Karnataka 1

54 Deptt. Of Life Science, NIT Rourkela 1

55 D. Thakur Construction 1

56 Divyasri Realtors, Kurnool, AP 1

57 Dar Al-Handasah, Pune, Maharashtra 1

58 Dr. Narla Tata Rao Thermal Power Station, Vijaywada 2

59 Dr. Reddy’s Laboratories Ltd., Hyderabad 2

60 East Coast Railway, Khurda Division, Bhubaneswar 11

61 Eco India Financial Service Pvt. Ltd., New Delhi 1

62 Ecole De Technologies Supeieve, Canada 1

63 EE Division, SDSTPS, SPSR, Nellore 5

64 Electronics Corporation India Ltd., Hyderabad 1

65 E-Mug Technologies Pvt. Ltd., Hyderabad 1

66 Engineering Services, Tata Steel, Jamshedpur 1

67 ERS Deptt., Vizag Steel Plant 1

68 Ethihad Airways Engineering, Abu Thabi, USAE 1

69 eXabit System Private Limited 2

70 Galfar Engineering & Contracting SAOG, Muscat , Oman 1

71 GlazoSmithKiline Consumer Healthcare Ltd., Rajmundry, AP 1

72 GNISS (Rectus Energy), Pune, Maharshtra 1

73 Goldman Sachs Service Pvt. Ltd., Benguluru 1

74 Google Inc. CA 1

75 Grihasti Udyog Pvt. Ltd., Roukela 3

76 Garden Reach Ship Builder & Engineering Ltd., Kolkata 1

77 Gharda Chemicals Limited, Dombivli 1

78 Grozip.Com.AKM Technologies Pvt. Ltd., Brand, Bhubaneswar 1

79 H&R Johnson (India), SPNR, Mumbai 2


214


80 Havtoor Leighton Specon, Doha, Qatar 1

81 HCL Career Development Centre, Hyderabad 1

82 HCSD-CPWD, JNIDBI, Hyderabad 2

83 Heavy Water Plant, Talcher, Odisha 1

84 Hero Motorcorp Ltd., Haridwar 1

85 Head Works Division, Kanupur, Keonjhar 1

86 HINDALCO Industries, Hirakud, Sambalpur, Odisha 6

87 Hindustan Aeronautics Limited, Bengaluru 10

88 Hindustan Aeronautics Limited, Sunabeda, Koraput 18

89 Hindustan Copper Limited, Khitri Nagar, Rajasthan 1

90 Hindustan Shipyard Limited, Visakhapatnam, Andhra Pradesh 1

91 Housing and Urban Development Department, Govt of Odisha 3

92 Hydrology Sub-Division, Burla, Odisha 5

93 ICMSc., Jakkur, Bangalore 1

94 IDCOL Ferro Chrome & Alloys Ltd., Jajpur Road, Odisha 3

95 Indian Institute of Technology, Bhubaneswar 12

96 Indian Institute of Technology, Bombay 11

97 Indian Institute of Technology, Kharagpur 10

98 Indian Institute of Technology, Guwahati 8

99 Indian Institute of Technology, Madras 4

100 Indian Institute of Technology, Jodhpur 1

101 Indian Institute of Technology, Kanpur 2

102 Indian Institute of Technology, Hyderabad 2

103 Indian Institute of Technology, Ropar 2

104 Indian Institute of Technology, Varanasi 1

105 Indian Institute of Technology, Gandhi Nagar, Gujrat 1

106 IIIT, Hyderabad 2

107 IISc. Bangalore 7

108 Indian Oil Corporation Limited, Barauni 3

109 Indian Oil Corporation Limited, Guwahati 5

110 Indian Oil Corporation Limited, Vadodra, Gujrat 2

111 Indian Space Research Organisation, Nellore, AP 1

112 Indian Space Research Organisation, Ahmedabad, Gujrat 1

113 Indian Statistical Institute, Kolkata 2

114 Institute of Chemical Technology, Mumbai 1

115 Institute of Materials Research & Engineering, Singapore 1

116 Indian Oil Corporation Limited, Paradip, Odisha 6

117 Indo Gulf Fertilizers, Amethi 1

118 Inovas Technologies, Delhi 1

119 Indian Oil Corporation Limited, Mathura, UP 2

120 ISRO Satelite Centre, Department of Space, GOI, Bengaluru 1

121 Ispat General Hospital, Rourkela Steel Plant, Rourkela 24

122 ITR, DRDO, Chandipur, Balasore, Odisha 24

123 JSW Steel Coated Product Ltd., Kalmeshwar, Nagpur 2

124 JCB India Limited, Ballabhgarh, Haryana 1


215


125 JNTU University, Hyderabad 1

126 Kerala Mineral & Metals Ltd., Kollam, Kerala 1

127 Kiriburu Iron Ore Mines, SAIL, Jharkhand 7

128 KML Molding, Haryana 1

129 KRIBHCO, Surat 1

130 Krishna Institute of Technology, Secunderabad 1

131 KBUNL, Kanti, NTPC Ltd., Muzafferarpur, Bihar 1

132 Kennametal India Limited, Bangalore 1

133 Lakhanpur Open Cast Mines, MCL, Burla, Odisha 1

134 Lakshyak Solutions Limited, Bhubaneswar 1

135 Lanjiberna Limestone & Dolamite Mines, OCL Rajgangpur 2

136 Larsen & Toubro Constructions Limited, Bangalore 1

137 Larsen & Toubro Limited, Kansbahal, Rajgangpur 11

138 Larsen & Toubro Limited, Chennai 1

139 Larsen & Toubro Limited, Mumbai 1

140 Learning & Development, Vedant Limited, Jharsuguda, Odisha 1

141 MCL, Nandira Colliery, Talcher, Odisha 9

142 Macquarie University, Sydney 1

143 MECON Limited, Ranchi, Jharkhand 3

144 Microsoft India R&D Pvt. Ltd., Hyderabad 2

145 Milk Mantra Dairy Pvt. Ltd 1

146 Mishra Dhatu Nigam Ltd., Hyderabad 2

147 MVRR-MFCS & INFRA Pvt. Ltd., Kurnool, AP 1

148 NARL, Dept. of Space, GOI, Gadanki, AP 1

149 National Academy of Broadcasting & Multimedia, Bhubaneswar 2

150 National Aluminium Company Limited, Angul, Odisha 3

151 National Aluminium Company Limited, Damanjodi, Koraput 4

152 National Chemical Laboratory, Pune 3

153 National Highway Authority of India, Bhubaneswar 4

154 National Thermal Power Corporation Ltd., Visakhapatnam 4

155 National Thermal Power Corporation Ltd., Anta, Rajasthan 1

156 National Thermal Power Corporation Ltd., Kaniha, Angul 12

157 National Thermal Power Corporation Ltd., Kokrajhar, Assam 2

158 National Thermal Power Corporation Ltd., Ramagundam , TS 1

159 New Holland Flat, Greater Noida, UP 1

160 Neyveli Lignite Corporation Ltd., TN 1

161 NISER, Bhubaneswar, Odisha 3

162 National Thermal Power Corporation Ltd., Korba, CG 1

163 OCAT Tower, Bhubaneswar 1

164 OCL India Limited, Rajgangpur, Odisha 4

165 Odisha Bridge & Construction Corporation Ltd., Bhubaneswar 7

166 Oil India Limited, Duliajan Assam 1

167 Omfed, Rourkela Dairy, Rourkela 1

168 ONGC, Dehradun 1

169 Oracle India Private Limited, Benguluru 1


216


170 Ordinance Factory, Yaddumailaram, Medak, TS 2

171 Paris Diderot University, Paris 1

172 PARSONS International Ltd., Abu Dhabi 1

173 Partner-twobythree, Powai, Mumbai 1

174 Phoenix Robotics, NIT Rourkela 2

175 Precistal IT Solutions Pvt., Vizag 1

176 Professional Computer System Pvt., Nepal 1

177 PXE, DRDO, Chandipur, Balesore, Odisha 17

178 R&D, Tata Steel Limited, Jamshedpur 2

179 Raman Research Institute, Bangalore 1

180 RCMA, Ministry of Defence, Hyderabad 2

181 RDSO, Lucknow 1

182 Reliance Industries Limited, AP 1

183 RINL, Visakhapatnam Steel Plant 1

184 Regen Powertech Pvt. Ltd, Udaipur, Rajasthan 1

185 Research Central Imarat, DRDO, Hyderabad 1

186 Rourkela Steel Plant, SAIL, Rourkela 108

187 Ryerson University, Totonto, Canada 1

188 Saint-Gobain India Limited, Sriperumbudur, TN 2

189 SAP Labs India Pvt. Ltd, Bangalore 2

190 Schneider Electric India Pvt. Ltd., Bangalore 9

191 School of Physical Science, NM University, Jalgaon 1

192 Shapoorji & Palanji Corporation Limited 4

193 SIMENS Limited, Mumbai 1

194 Silan Software, Bhubaneswar 1

195 Singareni Colliaries Company Limited, Godavadikhant, KN, TS 7

196 Singareni Colliaries Company Limited, Medipalli, TS 4

197 Singareni Colliaries Company Limited, Ramagundam, TS 4

198 Singareni Colliaries Company Limited, Vittal Nagar, TS 2

199 Singareni Colliaries Company Limited, Project Area, Adiryala, TS 5

200 Space Application Centre, ISRO, Gujrat 1

201 SSN College of Engineering, Tamil Nadu 1

202 Sahassa Sambhav Skill Development Pvt. Ltd., Noida, UP 1

203 Shabakah Net, Riyadh, KSA 1

204 Singareni Colliaries Company Limited, Kothagudem, TS 1

205 Singareni Thermal Power Plant, Jaipur, Adilabad 1

206 Sterlite Power Tranmission Limited, Salvassa 2

207 Sterlite Technologies Limited 5

208 Sukinda Chromite Mine, Kalaringlatta Jajpur 1

209 Talcher Super Thermal Power Station, Talcher, Kaniha 3

210 Tata Capital Limited,Lodha 1

211 Tata Motors Limited, Jamshedpur, Jharkhand 10

212 Tata Steel Limited, Jamshedpur 8

213 Tata Steel Limited, Kalinga Nagar, Duburi Jajpur, Odisha 4

214 Techtatva XT Pvt., Kathmandu 1


217


215 Terrablue XT Pvt. Ltd., Bangalore 1

216 Theranisis Life Science Pvt. Ltd., Hyderabad 1

217 Twin Engineers, Gujrat 4

218 Tangramme Furnishing Solutions Pvt. Ltd, Mumbai 1

219 Tata Hitachi Construction Machinery Co.Ltd., Jamshedpur 1

220 Tata Motors Limited, Patanagar 1

221 TCS Pune 1

222 Texas Instruments India 1

223 UCIL, Naruapahar, Jharkhand 1

224 UCIL, Tummalapalle Mines, Vemula, AP 4

225 United Sprits Technical Centre, Bangalore 4

226 University of Calgary, Canada 2

227 University of Lethbridge, Canada 1

228 University of New Brunswice, Canada 1

229 University of Windson, Canada 1

230 Universite de La Reunion-ESIROI France 1

231 University of Alberta Edmonton, Canada 1

232 University of Pennsylvania, USA 1

233 University of Walterloo, Ontario, Canada 2

234 University of Western Ontario, London, Canada 1

235 Uranium Corporation of India Limited, Mohuldih Mine 4

236 Ushar Agro Limited, Mathura 1

237 Vedanta Limited, Jharsuguda, Odisha 4

238 Vesuvius India Limited, Talatala Road, Kolkata 1

239 Visakhapatnam Steel Plant, Andra Pradesh 10

240 Vedanta Aluminium Limited, Jharsuguda 1

241 Varun Sagar Construction Pvt. Ltd., Hyderabad 1

242 Whiteklay Technologies Pvt. Ltd., Pune 1

243 Yodlee Infotech Pvt. Ltd., Bangalore 3

Total 766

Annexure 2: Local Study Tours conducted (for students)

Date of Visit Semester Branch No. ofStudents

No. of Faculty

Name of Industry visited

01.09.16 5th BM 36 2 Radiology & Biomedical Instru. Centre, IGH, Rourkela, Odisha02.09.16 5th CR 41 2 TRL Krosaki Refractories Ltd., Belpahar, Jharsuguda, Odisha07.09.16 7th CH 40 3 Coke Oven & Coal Chemicals,

Rourkela Steel Plant, Rourkela.08.09.16 5th CE 35 2 NTPC-SAIL Power Corpration Pvt. Ltd, RSP Rourkela, Odisha09.09.16 7th CS 40 2 Larsen & Toubro Limited, Kansbahal, Sundargarh, Odisha12.09.16 5th CR 41 2 TRL Krosaki Refractories Ltd., Belpahar, Jharsuguda, Odisha14.09.16 7th EI 33 2 Control & Instrumentation,

Rourkela Steel Plant, Rourkela.15.09.16 5th ID 31 1 Department of Design,

Rourkela Steel Plant, Rourkela.19.09.16 7th MM 36 2 Dalmia Institute of Scientific & Industrial Research, Rajgangpur20.09.16 5th MN 44 2 OCL India Limited, Rajgangpur, Sundargarh, Odisha21.09.16 7th ME 40 2 Blast Furnace,

Rourkela Steel Plant, Rourkela.


218

Date of Visit Semester Branch No. ofStudents

No. of Faculty

Name of Industry visited

22.09.16 7th FP 24 2 Jai Goswain Rice Mills, Bijay Bahal, Kuarmunda, Rourkela05.10.16 5th CE 29 2 NSPCL,NSPCL-SAIL,

Rourkela Steel Plant, Rourkela.06.10.16 7th CH 28 3 Coke Oven & Coal Chemicals,

Rourkela Steel Plant, Rourkela.07.10.16 7th CR 40 2 OCL India Limited, Rajgangpur, Sundargarh, Odisha24.10.16 5th EC 39 2 Door Sanchar Bhawan, Rourkela, Odisha26.10.16 5th ME 40 2 CRM and HSM,

Rourkela Steel Plant, Rourkela.27.10.16 5th MM 40 2 Blast Furnace,

Rourkela Steel Plant, Rourkela.28.10.16 5th MN 44 2 Hirakhand Bundia Colliery, Orient Area, MCL, Brajrajnagar31.10.16 7th FP 24 2 Food Storage Depo, Food Corporation of India, Rourkela08.11.16 5th CR 41 2 Dalmia Institute of Scientific & Industrial Research, Rajgangpur09.11.16 7th CE 35 2 NTPC-SAIL Power Corpration Pvt. Ltd, RSP Rourkela, Odisha10.11.16 5th CS 40 2 Automation Cell, EDP dept.,

Rourkela Steel Plant, Rourkela.11.11.16 5th EE 30 1 Larsen & Toubro Limited, Kansbahal, Sundargarh, Odisha15.11.16 5th CH 35 3 OCL India Limited, Rajgangpur, Sundargarh, Odisha16.11.16 7th EC 38 3 Communication Engg. Division,

Rourkela Steel Plant, Rourkela.17.11.16 5th ME 40 2 Blast Furnace,

Rourkela Steel Plant, Rourkela.18.11.16 5th MM 40 2 Larsen & Toubro Limited, Kansbahal, Sundargarh, Odisha06.01.17 6th CR 26 3 OCL India Limited, Rajgangpur, Sundargarh, Odisha09.01.17 6th MM 19 2 Dalmia Institute of Scientific & Industrial Research, Rajgangpur10.01.17 6th MN 43 2 Mine No.1 & 2, Orient Area, MCL, Brajrajnagar, Jharsuguda11.01.17 8th CR 40 2 SMS-II,

Rourkela Steel Plant, Rourkela.12.01.17 6th EE 30 1 Electrical Repair Shop,

Rourkela Steel Plant, Rourkela.13.01.17 8th ID 28 1 Larsen & Toubro Limited, Kansbahal, Sundargarh, Odisha16.01.17 8th EC 39 2 Door Sanchar Bhawan, Rourkela, Odisha17.01.17 6th EC 20 2 Power Grid Corporation of India Ltd., Naya Bazar, Rourkela02.02.17 6th CR 41 2 Blast Furnace,

Rourkela Steel Plant, Rourkela.06.02.17 8th CE 29 2 PMGSY Works, Birmitrapur, Odisha

07.02.17 8th BM 26 2 Biomedical Instruments Centre, Ispat General Hospital, Rourkela09.02.17 6th MM 36 2 Blast Furnace,

Rourkela Steel Plant, Rourkela.13.02.17 8th MN 43 2 Barsua Iron Ore Mine, SAIL, Tensa, Keonjhar, Odisha14.02.17 6th FP 29 2 Jai Goswain Rice Mills, Bijay Bahal, Kuarmunda, Rourkela

Annexure 3: Placement Record – 2016-17

SL COMPANY BM BT CE CH CR CS EC EE EI FT ID ME MM MN MBA CY ER LS MA PH MA PhD TOTAL

1 3SC Solutions 4 3 5 1 13

2 Aakash Institute 2 2 1 1 2 2 1 11

3Aarvee Associates

3 3

4 ABB 1 1

5 ACT Corp 1 1

6 Affine Analytics 1 1 1 3

7 Amazon 3 3


219


8 Amdocs 6 1 7

9 Arrelic 1 1 1 3

10 Ashok Leyland 4 4

11 Avanti Fellows 1 1 1 1 4

12 Axis Bank 1 1 2 4

13 Bajaj Auto 2 2

14

Bharat Petroleum Corporation Limited (BPCL)

2 2 4

15Bhushan Power & Steel Limited (BPSL)

3 4 10 2 6 16 15 56

16 Bridge and Roof 3 2 5

17 Capgemini 2 2 3 1 8

18 CDK Global 2 1 1 1 5

19 C-DOT 3 3

20C-DOT (Rank Holder Scheme)

1 1

21 Cerner 5 1 6

22 CGI 1 1 2

23Chinmaya Vidyalaya

1 2 1 1 5

24Coal India Limited (CIL)

6 6

25 CommScope 2 2

26D. E. Shaw & Co.

1 1

27 DBS Bank 2 2

28 Deloitte 1 2 1 2 1 7

29 Dolcera ITES 1 1 2

30 EcoLab 1 1

31Elegant Marine Services

2 2

32 EXL Service 1 2 1 2 2 1 1 10

33 Ford 2 1 3

34 Futura Ceramics 1 1

35 GAIL 3 3

36 General Electric 1 1 2

37Gigacom Semiconductor

3 3

38 Goldman Sachs 2 1 3

39Gupta Power Infrastructure Limited

3 1 4

40 H&R Johnson 2 2

41 Halftick 1 1

42HCL Technologies

4 4

43 Hilti 1 2 3

44 Hindalco 4 2 6

45Hindustan Coca-Cola Beverages

2 2

46Huawei Technologies

1 1


220


47 IBM 8 3 11

48 iBooks 1 1 1 1 1 1 6

49 Imerys 2 1 3

50Indian Oil Corporation Ltd. (IOCL)

4 4 8

51Infosys (Core Division)

1 1 3 5

52 ITD Cementation India Pvt Ltd

1 1

53 Itron 3 1 4

54 Jindal Steel Ltd. 1 1 1 1 1 2 7

55 JMC Projects 3 3

56 Kalkitech 2 2 4

57KEC International

1 3 4

58L&T Construction

14 3 2 1 2 1 23

59 L&T Heavy 2 1 3

60L&T Infrastructure

2 2

61 Lafarge 2 1 2 5

62Mahindra & Mahindra

2 2

63Mahindra Comviva

1 1

64 Maruti-Suzuki 4 4

65 MediaTek 1 1

66Mercedes-Benz R&D

4 4 8

67 Meritor 3 3

68Micro Focus (Novell)

5 5

69 Microsoft IT 2 2

70 Mu Sigma 2 1 1 4

71 PCBL 1 2 1 4

72 PepsiCo 3 1 4

73 Philips 3 3

74 Pradan 1 1 3 1 1 2 1 10

75 PWC India 2 1 3

76 Qualcomm 4 11 4 19


221


77 Saint Gobain 2 2

78Sandip University

3 2 1 1 2 9

79Sankalp Semiconductor

3 3

80 SAP Labs 4 4

81 Schaeffler 1 1

82Schneider Electric

2 2 4

83 Siemens 2 1 1 1 1 6

84 Somany 5 5

85 Sun Pharma 6 4 10

86 Tata Motors 2 6 8

87Tata Sponge & Iron Limited

1 1

88 Tata Steel 4 2 2 2 10

89 TCS 4 5 3 3 3 14 16 20 7 3 6 12 7 4 7 1 1 116

90 Tega Industries 1 1

91 Teradata 4 4

92Tredence Analytics

2 1 1 4

93TRL Krosaki Refractories Ltd.

4 4 8

94UnitedHealth Group

4 1 1 1 7

95 Uttam Galva 1 2 3

96VE Commercial Vehicles

1 1 2

97 Vedanta 1 5 1 6 2 5 9 29

98 Vedanta (HZL) 9 9

99 Verizon 1 1 2

100 Vodafone 1 1

101 Wipro 2 7 4 2 3 2 20

102WSP Parsons Brinckerhoff

1 1

103 Yodlee 1 1

104 Zomato 2 2

105 ZS Associates 1 1 1 1 4

Total 11 11 41 38 28 108 67 99 29 10 24 95 49 27 7 5 0 4 2 5 2 2 664


222

Annexure 4: Fresh Appointments (Regular)

Sl.No. Name Designation Date of joining

TEACHING

1. Prof. Animesh Biswas Director 11-Oct-2016

NON-TEACHING

Nil

Annexure 5: Staff Relieved on Retirement

Sl.No. Name Designation Date of Retirement

TEACHING

1. Prof. Satish kumar Agarwal Professor 31-Jan-2017

NON-TEACHING

Sri Artatran Behura Attendant(SG-II) 31-Aug-2016

Sri Kornalius Topno Attendant(SG-II) 31-Oct-2016

Sri Jagdish Chandra Kar Stenographer(SG-I) 31-Dec-2016

Sri Braja Mohan Das Assistant (SG-I) 31-Dec-2016

Sri Philip Surin Attendant(SG-II) 31-Dec-2016

Sri Bipin Bihari Mohapatra Assistant (SG-I) 31-Jan-2017

Sri Laxmidhar Dhal Assistant (SG-I) 28-Feb-2017

Sri Siba Prasad Mohapatra Executive Engr. (Civil) 28-Feb-2017

Sri Bhikari Charan Sahani Technician 31-Mar-2017

Sk. Shaikh Jalaluddin Stenographer(SG-I) 30-Apr-2017

Smt. Pravati Barik Attendant(SG-II) 30-Apr-2017

Annexure 6: Teaching Staff Relieved on Resignation

Sl.No. Name Designation Date of Resignation

TEACHING

1 Dr. Sandip Ghosh Asst. Professor Relieved on Resignation w.e.f…29.07.2016, Vide No. ES/2467, dtd…01.08.2016

2 Dr. (Mrs.) Ankhi Banerjee Asst. Professor Relieved on Resignation w.e.f…22.08.2016, Vide No. ES/2638, dtd…22.08.2016

3 Prof. Shantanu Patra Asst. Professor Relieved on Resignation w.e.f…14.12.2016, Vide No. ES/1011, dtd…13.12.2016

4 Prof. Amitesh Kumar Asst. Professor Relieved on Resignation w.e.f…14.12.2016, Vide No. ES/3552, dtd…14.12.2016

5 Prof. Ramakrishna Bag Asst. Professor Relieved on Resignation w.e.f…15.05.2017, Vide No. ES/2396, dtd…31.05.2017

6 Dr.(Ms.) Bhaswati Patnaik Associate Professor Relieved on Resignation w.e.f…04.02.2016, Vide No. ES/1881, dtd…05.04.2017

7 Dr. Munshi Nurul Islam Asst. Professor Relieved on Resignation w.e.f…31.05.2017, Vide No. ES/2419, dtd…02.06.2017

NON-TEACHING

1 Mr. Kapil Kumar Gupta Library Information Assistant

Relieved on Resignation 04.11.2016(AN), vide ES/3219, Dtd.04.11.2016

2 Mr. Gautam Ramani Assistant Registrar Relieved on Resignation 29.11.2016(AN), vide ES/3416, Dtd.29.11.2016

3 Mr.Subhransu Sekhar Patra Junior Assistant Relieved on Resignation 13.12.2016(AN), vide ES/1024, Dtd.13.12.2016


223

Sl.No. Name Designation Date of Resignation

4 Mr. Thirupataiah B Laboratory Assistant Relieved on Resignation 27.12.2016(AN), vide ES/3662, Dtd.27.12.2016

5 Ms. Harshi Gupta Accountant Relieved on Resignation 17.02.2017(AN), vide ES/1446, Dtd.17.02.2017

Annexure 7: Non-Teaching Staff Relieved on Resignation

Sl. No. Name Designation Date of Resignation 1 Mr. Sudin. B. Babu Assistant Registrar Relieved on Resignation 16.09.2015 (AN), vide ES/1754,

Dtd.16.09.2015 2 Mr. Durga Kumar Mishra Technical Assistant Relieved on Resignation 20.11.2015 (AN), vide ES/2111,

Dtd.19.11.2015 3 Mr. Ranjeet Singh Thakur Technical Assistant Relieved on Resignation 06.05.2016 (AN), vide ES/1791,

Dtd.06.05.2016 4 Mr. Ashish Kumar Sandilya Superintendent Relieved on Resignation 13.05.2016 (AN), vide ES/1830,

Dtd.13.05.2016

Annexure 8: Staff Relieved on Voluntary Retirement

Sl.No. Name Designation Date of RelievedNil

Annexure 9: Staff Expired

Sl.No. Name Designation DateTEACHING1. Prof. Sanjay Kumar Jena Professor 17.05.2017NON-TEACHING

1. Sri Florence Lugun Sr.Attendant 08.10.2016

Annexure 10: Non-Academic Staff (Non-Teaching)

Sl.No NAME DESIGNATION DEPT CODE1 Sri Kumar Prabhanjan Panigrahi Assistant Registrar AC

2 Sri Ashis Kumar Behera Assistant Registrar AC

3 Sri Chittaranjan Sahoo Superintendent(SG-II) AC

4 Sri Tapas Kumar Sarangi Sr. Superintendent AC

5 Sri Manoj Kumar Das Sr. Superintendent AC

6 Sri Rakesh Kumar Maharana Superintendent AC

7 Sri Jaya Prakash Shah Superintendent AC

8 Smt. M.J. Toppo Assistant (SG-I) AC

9 Smt. Archana Acharya Assistant (SG-I) AC

10 Smt. Asharani Beura Assistant (SG-I) AC

11 Sri Dillip Kumar Nayak Assistant (SG-II) AC

12 Ms. Diptimayee Rout Junior Assistant AC

13 Ms. Debasmita Pahi Junior Assistant AC

14 Sri Vijaya Soreng Sr.Attendant AC

15 Sri Lachhuman Kishan Sr.Attendant AC

16 Sri Rama Chandra Behera Pharmacist(SG-I) BM

17 Sri Nimain Sahoo Assistant (SG-I) BM

18 Smt. Pramodini Sahoo Attendant(SG-II) BM

19 Sri Rabindra Kumar Moharana Technical Assistant BM

20 Sri Haladhar Behera Technical Assistant BM

21 Sri Bikram Kumar Nayak Technical Assistant BM


224

Sl.No NAME DESIGNATION DEPT CODE22 Sri Chittaranjan Bhoi Technical Assistant BM

23 Sri Susanta Pradhan Laboratory Assistant BM

24 Sri Satyabrata Prusty Technician BM

25 Sri Debesh Kumar Purohit Sr. Scientific Officer CC

26 Sri Manas Ranjan Pattanayak Scientific Officer CC

27 Sri Tapan Kumar Pattnaik Scientific Officer CC

28 Sri Brajendra Kumar Behera Scientific Officer CC

29 Sri Pratap Kumar Tripathy Technical Assistant(SG-II) CC

30 Smt. Sabitarani Mohapatra Technical Assistant(SG-II) CC

31 Sri Manoj Kumar Patnaik Technical Assistant(SG-II) CC

32 Sri Dillip Kumar Barik Technical Assistant(SG-II) CC

33 Sri Shibasankar Dandapat Assistant (SG-II) CC

34 Sri Augustus Jate Attendant(SG-II) CC

35 Sri Neera Sunani Attendant(SG-II) CC

36 Sri Himansu Satapathy Engineer (Civil) CE

37 Sri Kulamani Patra Technical Assistant(SG-II) CE

38 Sri Sunil Cipriyan Xess Technical Assistant(SG-II) CE

39 Sri Ajit Kumar Nanda Technical Assistant(SG-II) CE

40 Sri Parmanand Pandit Technical Assistant CE

41 Sri Prashanta Roy Technical Assistant CE

42 Sri Harihar Mohapatra Assistant (SG-II) CE

43 Sri Harmohan Garnaik Attendant(SG-II) CE

44 Sri Romanus Lugun Attendant(SG-II) CE

45 Sri Suresh Majhi Attendant(SG-II) CE

46 Sri Prakash Chandra Mandal Attendant(SG-II) CE

47 Smt. Kanak Prabha Dasmohapatra Technical Assistant(SG-II) CH

48 Sri Bhakta Ballava Mishra Stenographer(SG-II) CH

49 Sri Samarendu Mohanty Sr. Technical Assistant CH

50 Sri Subhabrata Chakraborty Technical Assistant CH

51 Sri Bholanath Patel Technician CH

52 Sri Bijay Kumar Majhi Technician CH

53 Sri Utpal Kumar Swain Laboratory Assistant CH

54 Sri Surendra Majhi Attendant(SG-II) CH

55 Sri Bharat Chandra Sahu Sr.Attendant CH

56 Sri Jhaja Naik Sr.Attendant CH

57 Ms. Hiramani Acharya Assistant (SG-I) CR

58 Sri Nakula Barik Attendant(SG-I) CR

59 Sri Prasanta Kumar Mohanty Attendant(SG-II) CR

60 Sri Gopinath Behera Technical Assistant(SG-II) CR

61 Sri Susil Kumar Sahu Sr. Technical Assistant CR

62 Sri Arvind Kumar Technical Assistant CR

63 Sri Sukanta Garai Technical Assistant CR

64 Sri Shiv Kumar Verma Technical Assistant CR

65 Sri Nishant Kumar Technical Assistant CR

66 Sri John Paul Holiday Nag Technical Assistant(SG-II) CS

67 Ms. Bandana Panda Junior Assistant CS


225

Sl.No NAME DESIGNATION DEPT CODE68 Sri Fagu Oram Sr.Attendant CS

69 Sri Bikram Kumar Sahoo Technical Assistant CS

70 Sri Sauravranjan Sarangi Technical Assistant CS

71 Sri Kalandi Tarai Technical Assistant CS

72 Sri Chiranjib Chowdhury Technical Assistant CS

73 Sri Madan Mohan Behera Technical Assistant CS

74 Sri Trinath Mahapatro Technical Assistant CS

75 Sri Fakir Charan Chhatoi Assistant (SG-II) CW

76 Sri Murali Dhara Jena Attendant(SG-II) CY

77 Sri Nityananda Rout Attendant(SG-II) CY

78 Sri Rajendra Kumar Kar Assistant (SG-II) CY

79 Smt. Swagatika Tripathy Sr. Laboratory Assistant CY

80 Sri Samir Kumar Patra Sr. Laboratory Assistant CY

81 Sri Pratap Chandra Behera Laboratory Assistant CY

82 Sri Arup Kumar Dey Laboratory Assistant CY

83 Sri Jayanta Kumar Sahu Stenographer(SG-I) DN

84 Sri Bhanjan Kumar Sahu Sr. Superintendent DN

85 Sri Tutu Nayak Sr.Attendant DN

86 Sri Ajay Kumar Sahu Stenographer(SG-I) DR

87 Ms. Indira Rani Behera Superintendent DR

88 Sri Sumanta Kumar Moharana Junior Assistant DR

89 Sri Rabindra Kumar Das Sr.Attendant DR

90 Smt. Perry Radha Technical Assistant(SG-II) EC

91 Sri Madhusudan Nanda Attendant(SG-II) EC

92 Sri P. Prafulla Kumar Patro Technical Assistant(SG-II) EC

93 Sri Kishore Kujur Technician(SG-I) EC

94 Sri Iswar Chandra Gour Sr.Attendant EC

95 Sri Pramod Oram Assistant (SG-II) EC

96 Smt. Mamita Behera Sr. Technician EC

97 Sri Bhubaneswar Das Sr. Technical Assistant EC

98 Sri Mahesh Kumar Sahoo Technical Assistant EC

99 Sri Sams Tabrez Akhtar Technical Assistant EC

100 Sri Aditya Prasad Singh Biswal Technical Assistant EC

101 Sweta Basanta Sethi Technical Assistant EC

102 Sri Kamaljeet Singh Technical Assistant EC

103 Sri Mangal Kumar Mohapatra Technical Assistant EC

104 Sri Pravat Kumar Pattnaik Assistant (SG-I) EE

105 Sri Kunja Nayak Attendant(SG-II) EE

106 Sri Sushanta Kumar Sahoo Technical Assistant(SG-II) EE

107 Sri Chumnu Tirkey Attendant(SG-II) EE

108 Sri Gangadhar Bag Technician(SG-I) EE

109 Sri Sahadev Swain Technician(SG-I) EE

110 Sri Rabindra Kumar Nayak Sr. Technician EE

111 Sri Maheswar Mahato Technical Assistant EE

112 Sri Bhanu Pratap Behera Technical Assistant EE

113 Ms. Manisha Patra Technician EE


226

Sl.No NAME DESIGNATION DEPT CODE114 Sri N. Himansu Bhusan Technical Assistant EE

115 Sri Rama Prasad Samantaray Sr. Technician EE

116 Ms. Ranjita Barla Technical Assistant EE

117 Sri Rama Hari Swain Technical Assistant EE

118 Sri Pankaja Kumar Samal Technician EE

119 Sri Avijit Basak Technical Assistant EE

120 Sri K Soumyakanta Technical Assistant EE

121 Sri Sushanta Sahoo Technician EE

122 Sri Laluprasad Tiriya Technical Assistant EE

123 Sri Ambuja Kumar Jena Attendant(SG-I) EM

124 Sri Soobrat Kumar Samal Assistant (SG-I) EM

125 Sri Bijay Kumar Jena Technician(SG-I) EM

126 Sri Sanyasi Sahu Attendant(SG-II) EM

127 Sri Mahendra Kumar Behera Attendant(SG-II) EM

128 Sri Mohit Kalyari Attendant(SG-II) EM

129 Sri Full James Sindur Sr.Attendant EM

130 Sri Gouri Sankar Barik Technician EM

131 Sri Raghu Nath Sahu Sr.Attendant EM

132 Sri Gouri Sankar Khatua Sr.Attendant EM

133 Sri Kandu Bada, Attendant(SG-II) EM

134 Sri Ramesh Chandra Das Attendant(SG-II) EM

135 Sri Pravat Kumar Sahoo Sr. Technical Assistant EM

136 Sri Satyendra Das Sr. Technical Assistant EM

137 Sri Ramakanta Behera Sr. Technical Assistant EM

138 Sri Prasanta Kumar Pal Technician(SG-I) EM

139 Sri Umakanta Parida Technician EM

140 Sri Manoranjan Mahapatra Technical Assistant EM

141 Sri Ramkrishna Mandal Technician EM

142 Sri Sriman Satyabrata Dhal Technician EM

143 Sri Sanjay Kumar Nayak Technician EM

144 Sri Sambit Kumar Pradhan Technical Assistant EM

145 Sri Rajesh Kumar Sahoo Engineer (Elect.) EM

146 Sri Satya Ranjan Jena Technician EM

147 Sri Debabrata Kandi Technician EM

148 Sri Ashutosh Singh Technician EM

149 Sri Manoj Kumar Saraf Technician EM

150 Sri Susanta Kumar Pattanaik Technician EM

151 Sri Safikul Mondal Technical Assistant EM

152 Sri Jogeswar Majhi Technician EM(Elect.)

153 Sri Bharat Chandra Nayak Attendant(SG-II) EM(O)

154 Sri Bivas Das Assistant (SG-I) ER

155 Sri Gobinda Chandra Barik Sr.Attendant ER

156 Ms. Sabita Behera Laboratory Assistant ER

157 Sri Falguni Muduli Technician ER

158 Md. Hasan Seikh Laboratory Assistant ER

159 SriBamadev Acharya Deputy Registrar ES


227

Sl.No NAME DESIGNATION DEPT CODE160 Sri Prabir Kumar Dash Sr. Superintendent ES

161 Sri Rabi Shankar Singh Superintendent(Hindi) ES

162 Ms. Luna Bhowmick Superintendent ES

163 Smt. Rita Dungdung Assistant (SG-I) ES

164 Sri Soumya Ranjan Bag Superintendent ES

165 Sri Padma Bhusan Acharya Assistant (SG-I) ES

166 Sri Biswanath Mondal Assistant (SG-II) ES

167 Sri Jaya Krushna Sahu Junior Assistant ES

168 Ms. Sangita Sahoo Junior Assistant ES

169 Ms. Subasini Tanty Sr.Attendant ES

170 Sri Abhimanyu Moharana Attendant(SG-II) ES

171 Sri Kailash Rajak Sr.Attendant ES

172 Sri Bijay Singh Sr.Attendant ES

173 Sri Ashok Chandra Giri Sr.Attendant ES

174 Sri Babula Sethi Sr.Attendant ES

175 Sri Nilamadhab Sahu Sr.Attendant ES

176 Sri Ajit Kumar Soy Sr.Attendant ES

177 Sri Kshiroda Kumar Sahoo Assistant Registrar FA

178 Sri Mayadhar Mishra Assistant (SG-I) FA

179 Sri Pradip Kumar Mohanty Assistant (SG-I) FA

180 Sri Krushna Chandra Naik Assistant (SG-II) FA

181 Sri Rama Chandra Barik Sr.Attendant FA

182 Sri Dusmanta Pradhan Sr.Attendant FA

183 Sri Sushil Pancham Sr.Attendant FA

184 Smt. Anasuya Panda Sr. Assistant FA

185 Sri Chittaranjan Mishra Sr. Accountant FA

186 Sri Kamal Kanta Pattajoshi Accountant FA

187 Sri Abhishek Kumar Accountant FA

188 Sri Chandan Kumar Prusty Accountant FA

189 Sri Deepak Sahoo Superintendent FA

190 Mrs. Manisha Das Superintendent FA

191 Sri Swarup Narayan Behera Accountant FA

192 Sri Rajesh Beuria Technical Assistant FP

193 Sri Manoranjan Nayak Attendant(SG-II) FP

194 Sri Rajesh Kumar Khuntia Technician FP

195 Sri Toshamani Meher Technician FP

196 Dr. Samir Mohanty Technical Assistant(SG-II) GH

197 Sri Suresh Ray Attendant(SG-II) HC

198 Smt. Kalabati Tanty Sr.Attendant HC

199 Dr(Mrs.) Anindita Debata Medical Officer HC

200 Sh. Champak Bhattacharyya Sr. Medical Officer HC

201 Dr. Sameer Patnaik Medical Officer HC

202 Smt. Manasi Baral Assistant (SG-II) HS

203 Sri Badri Narayan Satapathy Technician HS

204 Sri Prakash Jojo Attendant(SG-II) HS

205 Sri Bijay Kumar Panda Assistant (SG-I) IA


228

Sl.No NAME DESIGNATION DEPT CODE206 Sri Ranjan Kumar Nayak Sr. Superintendent IA

207 Sri Mangu Jate Assistant (SG-II) IA

208 Sri Pandra Tanty Sr.Attendant IA

209 Mrs. Priti Suman Kullu Sr. Accountant IA

210 Sri M. N. Anandbabu Assistant Registrar IA

211 Sri Jogiya Dhanwar Assistant (SG-I) ID

212 Sri Prakasha Pradhan Sr.Attendant ID

213 Sri Nagmani Technical Assistant ID

214 Sri Ranjan Kumar Technical Assistant ID

215 Sri Akhil Raj K.V Technical Assistant ID

216 Sri Bijay Kumar Behera Technician ID

217 Sri Salku Marndi Technician ID

218 Sri Bhojaraju Gunjal Deputy Librarian LB

219 Sri Rabindra Kumar Sinha Admn. Officer(AO) LB

220 Sri Vinod Kumar Mishra Assistant Librarian LB

221 Sri Dibya Kishor Pradhan Assistant Librarian LB

222 Mrs. Puspita Mishra Assistant Librarian LB

223 Sh. Dhanwantari Prakash Tripathi Assistant Librarian LB

224 Sri Srikanta Sahu Library Information Assistant LB

225 Sri Kshirod Das, Sr. Technical Assistant LB

226 Sanat Kumar Behera Technical Assistant LB

227 Sri Gopi Ranjan Jena Assistant (SG-II) LB

228 Sri Sukhanath Dansana Attendant(SG-I) LB

229 Sri Rosan Kumar Panda Technical Assistant LG

230 Sri Jayanta Kumar Sahu Technical Assistant LS

231 Sri Aniruddha Chhagan Patil Technical Assistant LS

232 Sri Sanjiv Kumar Technical Assistant LS

233 Sri Girish Chandra Naik Assistant (SG-II) LS

234 Ms. Chahat Kausar Laboratory Assistant LS

235 Sri Sonu Bharti Laboratory Assistant LS

236 Sri Mathius Minz Attendant(SG-I) LS

237 Sri Chamudra Bada Assistant (SG-II) MA

238 Sri Kamal Charan Das Technical Assistant(SG-II) ME

239 Sri Kunal Nayak Technical Assistant(SG-II) ME

240 Sri Laxman Kumar Mahanta Technical Assistant ME

241 Sri Sambit Senapati Technical Assistant ME

242 Sri Narayan Prasad Bariki Technician(SG-I) ME

243 Sri Naren Kumar Bisoi Technician(SG-I) ME

244 Sri Jnana Ranjan Nayak Technician(SG-I) ME

245 Sri Arun Kumar Parhi Technician(SG-I) ME

246 Sri Chandra Sekhar Mohanty Assistant (SG-II) ME

247 Sri Somnath Das Sr. Technician ME

248 Sri Arabinda Khuntia Technician ME

249 Sri Sudhananda Pani Technician ME

250 Sri Somnath Seth Technician ME

251 Sri Bijan Kumar Sethi Attendant(SG-II) ME


229

Sl.No NAME DESIGNATION DEPT CODE252 Sri G. Syamagham Reddy Attendant(SG-II) ME

253 Sri Pratap Kumar Patra Attendant(SG-II) ME

254 Sri Pradip Kumar Mohanty Attendant(SG-II) ME

255 Dr.(Mrs.) Smrutisikha Bal Sr. Scientific Officer CIF

256 Sri Rajesh Patnaik Technical Assistant(SG-II) MM

257 Sri Shyamu Hembram Sr. Technical Assistant MM

258 Sri Arindam Pal Technical Assistant MM

259 Sri Anup Kumar Acharya Technical Assistant MM

260 Sri Chinnam Sivateja Technical Assistant MM

261 Sri Girish Chandra Dash Assistant (SG-I) MM

262 Sri Uday Kumar Sahu Technician(SG-I) MM

263 Sri Subrat Pradhan Technician MM

264 Sri Bhanja Naik Attendant(SG-II) MM

265 Sri Kishore Tanty Attendant(SG-II) MM

266 Sri Kashinath Barik Attendant(SG-II) MM

267 Sri Premananda Mallick Technical Assistant(SG-II) MN

268 Sri Biswanath Murmu Technical Assistant(SG-II) MN

269 Sri Basanta Kumar Pradhan Technical Assistant(SG-II) MN

270 Sri Brahmananda Naik Technical Assistant(SG-II) MN

271 Sri Sudhir Chandra Das Assistant (SG-II) MN

272 Sri Abhay Kumar Mohanta Technician MN

273 Sri Debananda Amat Technician MN

274 Madan Mohan Sethi Technical Assistant MN

275 Sri Bhaskar Chandra Jena Attendant(SG-II) MN

276 Sri Soma Oram Attendant(SG-II) MN

277 Ms. Arunima Dutta Engineer (Civil) PA

278 Sri Pradeep Kumar Mohanty Technician(SG-I) PA

279 Sri Lalit Kumar Tirkey Assistant (SG-II) PA

280 Sri Binu Prasad Sr.Attendant PA

281 Inayat Alli Technical Assistant(SG-I) PH

282 Sri Radharaman Nayak Technical Assistant PH

283 Sri Nitish Kumar Technical Assistant PH

284 Sri Somnath Mahapatra Technical Assistant PH

285 Sri Petrus Dungdung, Assistant (SG-I) PH

286 Ms. Smita Mohanta Laboratory Assistant PH

287 Sri Anant Kumar Laboratory Assistant PH

288 Sri Lokanath Behera Attendant(SG-I) PH

289 Sri Karuna Kar Panda Sr.Attendant PH

290 Sri Pradeep Kumar Panda Deputy Registrar PW

291 Sri Subash Chandra Mall Sr. Superintendent PW

292 Sri Sunny Choudhary Superintendent PW

293 Sri Rasmi Ranjan Dash Assistant (SG-II) PW

294 Sri Chitta Ranjan Swain Assistant (SG-II) PW

295 Sri Suraj Kumar Modak Junior Assistant PW

296 Sri Sukra Kerketta Sr.Attendant PW

297 Er. Santosh Kumar Upadhyay Registrar RG


230

Sl.No NAME DESIGNATION DEPT CODE298 Sri Braja Bandhu Behera Secretary (SG-II) RG

299 Ms. Rajeeta Patra Junior Assistant RG

300 Sri Dhansingh Bhumij Sr.Attendant RG

301 Dr. Pranakrishna Rout SAS Officer SA

302 Dr. Tushar Ranjan Patnaik SAS Officer SA

303 Sri Nalini Nihar Nayak SAS Officer SA

304 Ms. Purnima Anil Joshi SAS Assisstant SA

305 Surya Prakash Sonwani Superintendent SA

306 Sri Gopeeshree Krushna Mohanta Technician SA

307 Sri K. M. Kamal Attendant(SG-II) SA

308 Sri Gopal Gouda Sr.Attendant SA

309 Sri Birsa Munda Sr.Attendant SA

310 Sri Chama Oram Sr.Attendant SA

311 Sri Methedius Kerketta Sr.Attendant SA

312 Sri Prasanna Kumar Naik Assistant (SG-II) SM

313 Sri Uma Kanta Sahani Attendant(SG-II) SM

314 Sri Dhusasan Garmajhi Sr.Attendant SP

315 Sri Uttam Kumar Biswal Assistant Registrar SR

316 Sri Gyanendra Kumar Swain Sr. Accountant SR

317 Sri Bikash Chandra Sahoo Accountant SR

318 Smt. Pramila Das Assistant (SG-I) SR

319 Sri Trilochan Sahoo Assistant (SG-I) SR

320 Sri Ashok kumar Patnaik Assistant (SG-II) SR

321 Ms. Priyambada Jena Junior Assistant SR

322 Sri Balaram Champatiray Security Officer SS

323 Sri Parsuram Sethi Assistant (SG-II) SS

324 Sri Panchanan Sahoo Driver(SG-II) SS

325 Sri Mohan Singh Thapa Attendant(SG-II) SS

326 Sri Sanatan Choudhury Attendant(SG-II) SS

327 Paurush Kumar Sr. Technical Assistant TE

328 Hrusikesh Das Sr. Technical Assistant TE

329 Abinash Biswal Technical Assistant TE

330 Sri Snehasish Parhi Scientific Officer TIIR

331 Sri Krushna Chandra Sahu Technician TIIR

332 Sri Alok Kumar Sharma Technician TIIR

333 Sri Deepak Kaushal Technician TIIR

334 Sri Akshya Kumar Das Attendant(SG-II) TIIR

335 Sri Lingaraj Koleth Attendant(SG-II) TIIR

336 Sri Bijay Kumar Behera Sr. Technician TL

337 Sri Umesh Chandra Pati Technical Assistant TL

338 Sri Tapan Kumar Das Technician TL

339 Sri Ashwinee Kumar Mohanta Technician TL

340 Mrs. Swagatika Sahoo Assistant Registrar TP

341 Sri Harihar Barkey Assistant (SG-I) TP

342 Sri Ramesh Chandra Mahapatra Stenographer(SG-II) TP

343 Sri Sukhnath Mahali Sr.Attendant TP


231

Sl.No NAME DESIGNATION DEPT CODE344 Sri Anil Kumar Pramanik Sr.Attendant TP

345 Sri Rabindra Kumar Sahoo Sr. Technical Assistant WS

346 Sri Parmanand Kumar Technical Assistant WS

347 Sri Anup Prasad Sahoo Technical Assistant WS

348 Sri Tanmaya Kumar Sahoo Technical Assistant WS

349 Sri Mir Ayub Alli Technician(SG-I) WS

350 Sri Nirod kumar Jena Technician(SG-I) WS

351 Sri Soma Tigga Technician(SG-I) WS

352 Sri Ashis Kumar Pradhan Technician(SG-I) WS

353 Sri Sudhansu Sekhar Samal Technician(SG-I) WS

354 Sri Manoj Kumar Roul Sr. Technician WS

355 Sri Rabinarayan Jena Technician WS

356 Sri Debasis Dubey Technician WS

357 Sri Surendranath Murmu Technician WS

358 Bibekananda Parida Technician WS

359 Chandan Kumar Rahtey Technician WS

360 Sri Manas Sutradhar Technician WS

361 Sri Saroj Kumar Mallick Attendant(SG-II) WS

362 Sri Trilochan Sahu Attendant(SG-II) WS

363 Sri Manglu Kispotta Attendant(SG-II) WS

364 Sri Damodar Barik Sr.Attendant WS

Annexure 11: Training Status (Staff Members deputed / Sponsored for Training & Learning)

Sl.No. Name of the Staff Duration Title Venue01. Mr.Rabindra Kumar Sahoo, STA Mr.Anup

Prasad Sahoo, TA Mr.Anup Prasad Sahoo, TA Mr.Parmanand Kumar,TAMr.Laxman Kumar Mahanta,TA

22/09/2016 – 23-09-2016

Advances in Joining Process[TEQIP-II]

Jadavpur University,

Kolkata, W.B.

02. Mr.Srikanta Sahu, TA 25/11/2016 – 26/11/2016

The Role of Social Media and Networking

KIIT,BBSR

03. Mr.Manoj Kumar Patnaik, TA(SG-II)Mr.Bikram Ku.Sahoo, TAMr.Bhanjan Ku.Sahu, Sr.Supdt.

16-01-2017 – 20-01-2017

Development Programme for Office Secretaries, Personal Assistants & Office Staff,

Focus e-Age. [TEQIP]

Goa

04. Mr.Trinath Mohapatra, TA 13/03/2017 – 17/03/2017

Advanced Linux Server Administration

Hyderabad

05. Ms.Purnima Joshi, SAS Assistant 24-03-2017 – 25-03-2017

Officiatin in Games and Sports

Indore

06. Mr.Kalandi Tarai, TAMr. Chiranjib Chowdhury, TA

13/03/2017 – 17/03/2017

Advanced Linux Server Administration

[TEQIP-II (FSD)]

Hyderabad

07. Mr.Bamdev Acharya, Dy.RegistrarMr.Rabi Shankar Singh, Suptd.

16/05/2017 – 18/05/2017

32nd Hindi Conference & Workshop

New Delhi


232

Annexure–12: Institute Gold Medals

Sl Name of the Medal Roll No. Name of the Awardee Branch / Specialization CGPA

1Institute Gold Medal for Best Graduate (B.Tech and B.Arch.)

112EE0240 Sagar Kumar Electrical Engineering 9.72

2Institute Gold Medal for the Best Postgraduate (M.Tech.)

214ID1449 Manish Kumar Industrial Design 9.75

3Institute Gold Medal for the Best Postgraduate (MBA)

314SM1033 Sanjana Tripathy School of Management 9.07

4Institute Gold Medal for the Best Postgraduate (2 Yr M.Sc. and MA)

414CY2009 Subhankar Kundu Chemistry 9.69

5Institute Gold Medal for the Best Postgraduate with Integrated M.Sc Degree

411CY5093 Shanu Kumari Chemistry 9.28

6Institute Gold Medal for the Best Postgraduate with Dual Degree B.Tech and M.Tech.

711EE2162 Saswat Ranjan Mishra Electrical Engineering 9.55

7Gold Medal for the Best Under-graduate Project (B.Tech and B.Arch)

112ID0011 Sonalisa Patel Industrial Design 9.72

8Gold Medal for the Best Postgraduate Project (M.Tech and Dual Degree)

214EE5514 Dhiman Das Electrical Engineering --

9Prof. Bhubaneswar Behera Gold Medal for Best All-rounder of the Ug out going batch-2016

None found suitable

Annexure–13: Institute Silver Medals (B. Tech.)

Sl. Branch / Specialization Roll No. Student Name CGPA1 BM : Biomedical Engineering 112BM0611 PATEL HAILEE BHARAT 8.782 BT : Biotechnology 112BT0016 ABHISHEK SINGH CHAUHAN 8.923 CE : Civil Engineering 112CE0546 GARLADINNE DINESH KUMAR 8.844 CH : Chemical Engineering 112CH0128 AKANKSHYA SAHU 9.255 CR : Ceramic Engineering 112CR0595 MEGHA ACHARYA 9.536 CS : Computer Science and Engineering 112CS0182 MD SHAHBAZ SHAFI 9.237 EC : Electronics and Communication Engineering 112EC0242 DEBMALYA MALLICK 9.398 EI : Electronics and Instrumentation Engineering 112EI0104 CHITTARANJAN BALIARSINGH 9.149 EE : Electrical Engineering 112EE0240 SAGAR KUMAR 9.7210 ID : Industrial Design 112ID0011 SONALISA PATEL 9.1411 ME : Mechanical Engineering 112ME0212 ABHIJIT PUSTY 9.4612 MM : Metallurgical and Materials Engineering 112MM0398 MANASWINI CHINARA 9.3613 MN : Mining Engineering 112MN0497 ADITYA ACHARYA 9.17

Annexure–14: Institute Silver Medals (M. Tech.)

Sl. Branch / Specialization Roll No. Student Name CGPA1 BM1 : Biomedical Engineering 214BM1457 KRISHNA DIXIT 8.992 BM2 : Biotechnology 214BM2033 YAMINI YOGALAKSHMI 9.533 CE1 : Geotechnical Engineering 214CE1039 MAHAJAN SHWETA YOGIRAJ 9.624 CE2 : Structural Engineering 214CE2048 KAMALAKKANNAN S 9.565 CE3 : Transportation Engineering 214CE3084 VEERA LEELA MANUSHA 9.546 CE4 : Water Resources Engineering 214CE4382 JNANA RANJAN KHUNTIA 9.457 CH1 : Chemical Engineering 214CH1104 PATANKAR SAGAR VINOD 8.838 CH2 : Safety Engineering 214CH2531 GARIMELLA VENKATA SAINATH 8.869 CR2 : Industrial Ceramics 214CR2476 AKANKSHA KUMARI 8.8710 CS1 : Computer Science 214CS1128 LOKESH SHARMA 8.7511 CS2 : Information Security 214CS2144 DIANGARTI BHALANG TARIANG 8.9512 CS3 : Software Engineering 214CS3487 RANSINGH BISWAJIT RAY 9.0213 EC2 : VLSI Design and Embedded Systems 214EC2168 SRADHANJALI MOHAPATRA 9.2314 EC3 : Electronics and Instrumentation Engineering 214EC3010 DEBASHIS BISWAL 9.3815 EC5 : Communication and Networks 214EC5409 SNIGDHA BHUYAN 9.39


233

Sl. Branch / Specialization Roll No. Student Name CGPA16 EC6 : Signal and Image Processing 214EC6182 MONA SHREE 9.1917 EE1 : Electronic Systems and Communication 214EE1211 PRIYANKA 918 EE3 : Control and Automation 214EE3236 ANUBHAV SUNDARIA 9.3119 EE4 : Power Electronics and Drives 214EE4248 SHRUTISNATA MISHRA 9.1320 EE5 : Industrial Electronics 214EE5263 ABHIRUP PAL 8.8121 ID1 : Industrial Design 214ID1449 MANISH KUMAR 9.7522 ME1 : Machine Design and Analysis 214ME1008 YASSIN ALKASSAR 9.5823 ME2 : Production Engineering 214ME2281 CHANDRAMANI UPADHYAY 9.3424 ME3 : Thermal Engineering 214ME3309 DIBYENDU GHOSH 9.6125 ME5 : Cryogenic and Vacuum Technology 214ME5348 BASIL GEORGE THOMAS 9.526 MM2 : Steel Technology 214MM2351 BHARDWAJ RAVINDRA GIRIRAJ 8.927 MM1 : Metallurgical and Materials Engineering 214MM1372 PALLABI BHUYAN 9.3228 MN1 : Mining Engineering 214MN1371 HIMALAY SHARMA 8.83

Annexure–15: Institute Silver Medals (M. Sc., M. A. & Integrated M. Sc.)

Sl. Branch / Specialization Roll No. Student Name CGPA1 CY5 : Chemistry 411CY5093 SHANU KUMARI 9.282 MA5 : Mathematics 411MA5112 AMISHA PRIYADARSHINI 8.243 PH5 : Physics 411PH5116 MEKAP SUBHASISH PATTANAIK 9.114 CY2 : Chemistry 414CY2009 SUBHANKAR KUNDU 9.695 AG2 : Applied Geology 414ER2021 DIBYASHAKTI PANDA 9.46 LS2 : Life Science 414LS2027 MANALI DAS 8.787 MA2 : Mathematics 414MA2056 DIKSHA GHALOT 8.398 PH2 : Physics 414PH2048 MANASI MANDAL 8.659 HS1 : Development Studies 414HS1014 DIMPLE PATTNAIK 8.9

Annexure–16: Institute Silver Medals (B. Tech. & M. Tech. Dual Degree)

Sl. Branch / Specialization Roll No. Student Name CGPA1 CE3 : Transportation Engineering 711CE3019 SOURABH PANDA 9.162 CE4 : Water Resources Engineering 711CE4155 DEBASHISH KHUNTIA 8.673 CH1 : Chemical Engineering 711CH1156 SANGITA SWAPNASRITA 9.194 CR1 : Ceramic Engineering 711CR1158 SOUMYA PRAKASH SAHOO 9.025 CS1 : Computer Science 711CS1030 SANDEEP PANDA 9.246 CS2 : Information Security 711CS2037 MADHUMITA RAUTELA 8.597 EC2 : VLSI Design and Embedded Systems 711EC2123 K VENKATA SRIRAMA ROHIT 8.928 EC4 : Communication and Signal Processing 711EC4051 NANDITA DALMIA 9.079 EE1 : Electronic Systems and Communication 711EE1072 SIDHARTHA MOHAPATRA 8.3210 EE2 : Power Control and Drives 711EE2162 SASWAT RANJAN MISHRA 9.5511 EE3 : Control and Automation 711EE3073 ANURAG BHARAT KUMAR SHAH 9.2612 ME4 : Mechatronics and Automation 711ME4079 RAJDEEP PAL 8.8613 MM1 : Metallurgical and Materials Engineering 711MM1141 SHRIKANTH S 8.8814 MN1 : Mining Engineering 711MN1172 ABHIJEET DUTTA 8.8


234

Annexure–17: Endowment Medals and Awards

Sl Name of the Medal Roll No. Name of the Awardee Branch / Specialization CGPA1 Prof. S.C.Naik Gold Medal for Best

Graduate of Chemical Engineering112CH0128 Akankshya Sahu 9.25

2 Snigdhashri Patra Memorial Gold Medal for the best Ph.D.Thesis of 2015-16

512ME1040 Aruna Thakur

3 Saurav Ranjan Kar Memorial Award (Best Graduate of the Institute)

112EE0240 Sagar Kumar 9.72

4 Pranab Memorial Award (Best Graduate of Mechanical Engineering)

112ME0212 Abhijit Pusty 9.46

5 Bhaswati Paul Memorial Award (Best Project on Environment Pollution)

None found suitable

6 Shanta Jain Prize (Best product oriented project)

214EE5514 Dhiman Das

7 Bunty Memorial Award (Best Engineering Graduate of the Institute)


8 Sugat Kishore Mall Memorial Award (Best Graduate of Electrical Engineering)


9 Prof. Ashok Kumar Mohanty Award (Best Graduate of Metallurgical & Materials Engineering)

112MM0398 Manaswini Chinara 9.36

10 Ronak Das Memorial Award (Best Undergraduate Project of Chemical Engineering)

112CH101 Sidhartha Tirthankar

Annexure–18: Codes of different Departments and Offices Management

Director’s Office DRDeans’ Office DNDean (Academic Affairs) AADean (Planning & Development) PDDean (SRICCE) SRDean (Student Affairs) SADean (Alumni Affairs & Resources Generation) ARDean (Faculty & Welfare) FWRegistrar RGAcademic DepartmentsBiotechnology & Medical Engineering BMCivil Engineering CEChemical Engineering CHComputer Science & Engineering CSChemistry CYElectronics & Communication Engineering ECElectrical Engineering EEEarth & Atmospheric Sciences ERFood Process Engineering FPHumanities & Social Sciences HSIndustrial Design IDLife Science LSMathematics MAMechanical Engineering MEMetallurgical & Materials Engineering MMMining Engineering MNPlanning & Architecture PAPhysics & Astronomy PHSchool of Management SMCentral Workshop WS


235

Academic CentresComputer Centre CCExtra Academic Activities EABiju Pattanik Central Library LBExamination Office EXStudent Activity Centre SATraining & Placement Centre TPAlumni Relation Centre ARTechnology Innovation & Industry Relation (TIIR) TIA N Khosla Centre for Technology Enabled Learning TEAdministrationRegistrar’s Office RGEstablishment Section ESAcademic Section ACFinance & Accounts Section FAInternal Audit Section IAPurchase & Works Section PWSponsored Research, Industrial Consultancy & Continuing Education (SRICCE) SRTechnical Services Section TSSupport Services and FacilitiesEstate Management EMCivil Construction CTGuest Houses GHElectrical Construction ETAutomation Cell OAHealth Centre HCSafety & Security SSTelephone Exchange TLHalls of ResidenceChief Warden’s Office CWS S Bhatnagar Hall of Residence SBM Visweswaraya Hall of Residence MVG D Birla Hall of Residence GBDhirubhai Ambani Hall of Residence DAM S Swaminathan Hall of Residence MSC V Raman Hall of Residence CVHomi Bhabha Hall of Residence HBKiran Mazumdar Shaw Hall of Residence KMVikram Sarabhai Hall of Residence VSSatish Dhawan Hall of Residence SD

FINANCIALSTATEMENTS

NATIONAL INSTITUTE OF TECHNOLOGY ROURKELA

STATEMENT OF ACCOUNTSFOR THE FINANCIAL YEAR

2016-2017


239


240


241


242


243


244


245


246

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELABALANCE SHEET FOR THE YEAR ENDED ON 31.03.2017

Amount in `

Particulars Schedules As at 31-03-2017 As at 31-03-2016

FUNDS & LIABILITIES

CORPUS/CAPITAL FUND 1 7,07,35,30,762.19 6,88,71,69,994.43

DESIGNATED/EARMARKED/ENDOWMENT FUNDS 2 2,04,23,68,372.81 1,63,89,36,581.53

CURRENT LIABILITIES AND PROVISIONS 3 88,51,57,501.49 1,11,23,82,863.68

TOTAL 10,00,10,56,636.49 9,63,84,89,439.64

ASSETS

FIXED ASSETS 4

Tangible Assets 4,57,39,79,470.62 4,29,22,26,995.00

Intangible Assets - -

Capital Work-in-Progress 2,45,64,67,779.19 2,57,04,97,217.00

INVESTMENTS FROM EARMARKED/ ENDOWMENT FUNDS 5

Long Term 70,10,32,177.69 51,95,77,459.42

Short Term

INVESTMENTS- OTHERS 6 - -

CURRENT ASSETS 7 80,74,92,120.15 48,29,10,101.48

LOANS, ADVANCES & DEPOSITS 8 1,46,20,85,088.85 1,77,32,77,666.74

TOTAL 10,0 0,10,56,636.49 9,63,84,89,439.64

Asst Registrar (FA) Registrar Director


247

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELAINCOME AND EXPENDITURE ACCOUNT FOR THE YEAR ENDED ON 31.03.2017

Amount in `

Particulars Schedules As at 31-03-2017 As at 31-03-2016

INCOME

Academic Receipts 9 29,58,12,885.19 27,12,05,834.84

Grants & Subsidies 10 1,19,19,50,554.65 1,07,62,27,732.00

Income from Investments 11 - -

Interest Earned 12 47,11,845.00 82,47,263.00

Other Income 13 3,67,50,727.73 3,80,79,738.47

Prior Period Income 14 - -

TOTAL 1,52,92,26,012.57 1,39,37,60,568.31

EXPENDITURE

Staff Payments & Benefits 15 79,57,91,167.94 70,43,50,701.00

Academic Expenses 16 36,22,52,655.50 34,33,12,891.14

Administrative and General Expenses 17 13,55,15,677.45 13,47,26,664.70

Transportation Expenses 18 7,29,429.00 6,76,456.00

Repairs & Maintenance 19 5,89,95,062.67 4,46,69,714.00

Finance Cost 20 2,86,370.51 28,78,111.32

Depreciation for the year 4 25,30,63,666.62 25,74,73,791.00

Other Expenses 21 - -

Prior Period Item(s) 22 70,17,920.54 2,04,99,432.00

TOTAL 1,61,36,51,950.23 1,50,85,87,761.16

SURPLUS / (DEFICIT) -8,44,25,937.66 -11,48,27,192.85

Fund Transfers [From / (To)]:

Deffered Income-Capital Fund 25,30,63,666.62 27,35,93,611.00

Funds for Captial Expenditure -7,50,00,000.00 -7,50,00,000.00

Funds for Academic Activities -2,50,00,000.00 -2,50,00,000.00

Funds for Mantenance of Assets -2,50,00,000.00 -2,50,00,000.00

Staff Development Fund -2,50,00,000.00 -2,50,00,000.00

BALANCE SURPLUS /(DEFICIT) CARRIED TO GENERAL FUND (Sch-1)

1,86,37,728.96 87,66,418.15

SIGNIFICANT ACCOUNTING POLICIES 23

CONTINGENT LIABILITIES AND NOTES ON ACCOUNTS 24



248

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELASCHEDULES FORMING PART OF BALANCE SHEET AS ON 31.03.2017

SCHEDULE : 01 - CORPUS / CAPITAL FUND

Amount in `

Particulars As at 31-03-2017 As at 31-03-2016

A DEFFERRED INCOME - CAPITAL FUND

Balance as at the begining of the Year 6,86,27,24,212.00 6,08,98,83,252.28

Addition during the year: 42,07,86,705.42 1,04,64,34,570.25

7,28,35,10,917.42 7,13,63,17,822.53

Less: Refunds / Transfers (25,30,63,666.62) (27,35,93,610.53)

TOTAL (A) 7,03,04,47,250.80 6,86,27,24,212.00

B GENERAL FUND

Balance as at the begining of the Year 2,44,45,782.43 1,56,79,364.00

Add: Suplus/(Deficit) transfer from Income over Expenditure Account 1,86,37,728.96 87,66,418.43

TOTAL (B) 4,30,83,511.39 2,44,45,782.43

TOTAL (A+B) 7,07,35,30,762.19 6,88,71,69,994.43

SCHEDULE : 02 - DESIGNATED / EARMARKED FUNDS (Supported by Sch-2A):

Amount in `


1 Institute Corpus Fund 1,39,87,05,881.98 1,16,87,96,241.85

2 Funds for Capital Expenditure 24,03,71,011.45 16,35,32,453.03

3 Funds for Academic Activities 7,86,26,362.68 5,36,26,362.68

4 Funds for Maintenance of Assets 8,31,18,285.71 5,62,79,727.29

5 Staff Development Fund 6,54,96,520.42 3,86,57,343.00

6 SRICCE Fund 3,83,99,191.39 3,66,05,627.37

7 Student Aid Fund 1,67,38,407.73 1,58,78,410.21

8 Old Pension Fund 7,83,01,205.39 7,26,11,285.39

9 Retirement Benefit Funds 1,39,76,575.00 1,32,90,477.00

10 Endowment Fund 2,68,48,731.06 1,84,63,753.71

11 Staff Welfare Fund 17,86,200.00 11,94,900.00

TOTAL 2,04,23,68,372.81 1,63,89,36,581.53


249N

AT

ION

AL

IN

ST

ITU

TE

OF

TE

CH

NO

LO

GY

, RO

UR

KE

LA

SC

HE

DU

LES

FO

RM

ING

PA

RT

OF

BA

LAN

CE

SH

EE

T A

S O

N 3

1.0

3.2

01

7

SC

HE

DU

LE :

2A

- D

ES

IGN

ATE

D /

EA

RM

AR

KE

D F

UN

DS

Am

ount

in `

Sl.

No.

PAR

TIC

ULA

RS

A

ddit

ion

to F

und

Tota

l R

efun

ds /

Tran

sfer

C

apit

al E

xp

Rev

enue

Exp

T

otal

Exp

C

losi

ng B

al.

as

o

n

31

-03

-20

17

1In

stit

ute

Cor

pus

Fund

1,1

6,8

7,9

6,2

41

.85

2

3,2

0,2

2,5

56

.13

1

,40

,08

,18

,79

7.9

8

21

,12

,91

6.0

0

-

-

21

,12

,91

6.0

0

1,3

9,8

7,0

5,8

81

.98

2Fu

nds

for

Cap

ital

Exp

endi

ture

16

,35

,32

,45

3.0

3

7,6

8,3

8,5

58

.42

2

4,0

3,7

1,0

11

.45

-

-

-

2

4,0

3,7

1,0

11

.45

3Fu

nds

for

Aca

dem

ic A

ctiv

itie

s 5

,36

,26

,36

2.6

8

2,5

0,0

0,0

00

.00

7

,86

,26

,36

2.6

8

-

-

-

7,8

6,2

6,3

62

.68

4Fu

nds

for

Mai

nten

ance

of

Ass

ets

5,6

2,7

9,7

27

.29

2

,68

,38

,55

8.4

2

8,3

1,1

8,2

85

.71

-

-

-

8

,31

,18

,28

5.7

1

5S

taff

Dev

elop

men

t Fu

nd 3

,86

,57

,34

3.0

0

2,6

8,3

9,1

77

.42

6

,54

,96

,52

0.4

2

-

6,5

4,9

6,5

20

.42

6S

RIC

CE

Fun

d 3

,66

,05

,62

7.3

7

2,5

1,6

8,3

88

.02

6

,17

,74

,01

5.3

9

-

-

2,3

3,7

4,8

24

.00

2

,33

,74

,82

4.0

0

3,8

3,9

9,1

91

.39

7S

tude

nt A

id F

und

1,5

8,7

8,4

10

.21

8

,59

,99

7.5

2

1,6

7,3

8,4

07

.73

-

-

1

,67

,38

,40

7.7

3

8O

ld P

ensi

on F

und

7,2

6,1

1,2

85

.39

5

6,8

9,9

20

.00

7

,83

,01

,20

5.3

9

-

-

-

7,8

3,0

1,2

05

.39

9R

etir

emen

t B

enefi

t Fu

nds

1,3

2,9

0,4

77

.00

6

,86

,09

8.0

0

1,3

9,7

6,5

75

.00

-

-

-

1

,39

,76

,57

5.0

0

10

End

owm

ent

Fund

1,8

4,6

3,7

53

.71

8

8,7

5,3

65

.85

2

,73

,39

,11

9.5

6

4,9

0,3

88

.50

-

4

,90

,38

8.5

0

2,6

8,4

8,7

31

.06

11

Sta

ff W

elfa

re F

und

11

,94

,90

0.0

0

5,9

1,3

00

.00

1

7,8

6,2

00

.00

-

-

-

1

7,8

6,2

00

.00

Tota

l 1

,63

,89

,36

,58

1.5

3

42

,94

,09

,91

9.7

8

2,0

6,8

3,4

6,5

01

.31

2

6,0

3,3

04

.50

-

2

,33

,74

,82

4.0

0

2,5

9,7

8,1

28

.50

2

,04

,23

,68

,37

2.8

1

Pre

viou

s Ye

ar 1

,33

,76

,98

,37

9.2

9

34

,37

,65

,47

4.7

7

1,6

8,1

4,6

3,8

54

.06

2

,06

,61

,85

7.5

3

-

2,1

8,6

5,4

15

.00

4

,25

,27

,27

2.5

3

1,6

3,8

9,3

6,5

81

.53


250


SCHEDULE : 03 - CURRENT LIABILITIES AND PROVISIONS

Amount in `


A CURRENT LIABILITIES

1 Statutory Liabilities (GPF,TDS,WC TAX, CPS, GIS, NPS) : 1,53,19,712.00 1,51,48,504.00

2 Secured Loans - -

3 Security Deposits

a. Security Deposit (Contractor) 27,63,27,731.50 32,62,12,177.50

b. Security Deposit (Staffs) 26,439.00 -

c. Security Deposit (Students) 4,62,51,667.49 4,43,70,963.36

4 Sundry Creditors (For Supplies) 12,75,85,325.90 23,17,72,207.81

5 Accounts Payables and Other Liabilities 1,72,44,376.16 3,90,23,386.73

6 Advances Received 7,90,30,019.84 7,44,47,372.34

7 Grants / Other Funds (Supported by Sch-3A) 24,33,31,576.99 24,96,14,556.11

8 Other current Liabilities

a. TEQIP II (Payable) 23,34,794.00 64,17,027.00

TOTAL (A) 80,74,51,642.88 98,70,06,194.85

B PROVISIONS

1 Salary 3,31,98,509.61 3,17,76,350.83

2 Gratuity 59,23,404.00 22,22,646.00

3 Pension 1,07,40,600.00 83,42,669.00

4 UEL 1,59,709.00 6,94,093.00

5 Expenses payable (Liability for Exp.) 2,33,09,142.00 7,81,29,480.00

6 Provision for D.A. 43,74,494.00 42,11,430.00

TOTAL (B) 7,77,05,858.61 12,53,76,668.83

TOTAL(A+B) 88,51,57,501.49 1,11,23,82,863.68


251N

AT

ION

AL

IN

ST

ITU

TE

OF

TE

CH

NO

LO

GY

, RO

UR

KE

LA

SC

HE

DU

LES

FO

RM

ING

PA

RT

OF

BA

LAN

CE

SH

EE

T A

S O

N 3

1.0

3.2

01

7

SC

HE

DU

LE :

03

A -

GR

AN

TS /

OTH

ER

FU

ND

S (

havi

ng C

redi

t B

alan

ce)

Am

ount

in `

Sl.

No.

PAR

TIC

ULA

RS

Ope

ning

Bal

. as

on

01

-04

-20

16

Add

itio

n to

Fun

dTo

tal

Ref

unds

/ Tr

ansf

er

Cap

ital

Exp

R

even

ue E

xp

Tot

al E

xp

Clo

sing

Bal

. as

on

31

-03

-20

17

1G

rant

s / S

ubsi

dies

a. T

EQ

IP G

rant

s 4

,70

,31

,82

9.1

2

5,4

5,8

7,3

83

.00

1

0,1

6,1

9,2

12

.12

-

1

,81

,28

,32

9.0

0

3,2

5,1

4,3

42

.49

5

,06

,42

,67

1.4

9

5,0

9,7

6,5

40

.63

b. O

ther

Gra

nt 2

,50

,36

,25

8.0

0

-

2,5

0,3

6,2

58

.00

-

5

5,2

5,0

94

.00

5

5,2

5,0

94

.00

1

,95

,11

,16

4.0

0

2R

esea

rch

& C

onsu

ltan

cy

Pro

ject

Fun

ds (

SR

ICC

E)

17

,23

,70

,34

9.9

9

22

,90

,57

,29

1.5

0

40

,14

,27

,64

1.4

9

9,9

7,0

00

.00

7

,73

,76

,40

1.0

0

15

,49

,91

,06

3.1

3

23

,33

,64

,46

4.1

3

16

,80

,63

,17

7.3

6

3E

xter

nal F

ello

wsh

ip 1

6,8

9,7

13

.00

1

,02

,27

,21

4.0

0

1,1

9,1

6,9

27

.00

9

2,7

6,0

97

.00

9

2,7

6,0

97

.00

2

6,4

0,8

30

.00

4E

xter

nal S

chol

arsh

ip 3

4,8

6,4

06

.00

9

6,9

4,8

41

.00

1

,31

,81

,24

7.0

0

1,1

0,4

1,3

82

.00

1

,10

,41

,38

2.0

0

21

,39

,86

5.0

0

Tota

l 2

4,9

6,1

4,5

56

.11

3

0,3

5,6

6,7

29

.50

5

5,3

1,8

1,2

85

.61

2

,13

,14

,47

9.0

0

10

,10

,29

,82

4.0

0

18

,75

,05

,40

5.6

2

30

,98

,49

,70

8.6

2

24

,33

,31

,57

6.9

9

Pre

viou

s Ye

ar 1

9,7

1,1

2,7

24

.28

2

6,7

1,4

0,5

30

.96

4

6,4

2,5

3,2

55

.24

1

,25

,67

,65

8.3

1

7,8

5,5

8,1

69

.00

1

2,3

5,1

2,8

71

.82

2

1,4

6,3

8,6

99

.13

2

4,9

6,1

4,5

56

.11

SC

HE

DU

LE :

03

B -

GR

AN

TS /

OTH

ER

FU

ND

S (

havi

ng D

ebit

Bal

ance

, sh

own

unde

r S

ch-8

)

Am

ount

in `

Sl.

No.

PAR

TIC

ULA

RS

Ope

ning

Bal

. as

on

01

-04

-20

16

Add

itio

n to

Fun

dTo

tal

Ref

unds

/ Tr

ansf

er

Cap

ital

Exp

R

even

ue E

xp

Tot

al E

xp

Clo

sing

Bal

. as

on

31

-03

-20

17

1G

rant

s / S

ubsi

dies

a. P

lan

Gra

nt (

1,2

3,4

6,4

0,3

51

.84

) 8

0,2

1,4

3,0

00

.00

(

43

,24

,97

,35

1.8

4)

-

39

,65

,22

,78

6.1

7

35

,90

,15

,63

4.6

7

75

,55

,38

,42

0.8

4

(1,1

8,8

0,3

5,7

72

.68

)

b. N

on-P

lan

Gra

nt (

33

,79

,71

,27

4.3

4)

1,0

8,0

0,0

0,0

00

.00

7

4,2

0,2

8,7

25

.66

-

-

8

3,2

9,3

4,9

19

.98

8

3,2

9,3

4,9

19

.98

(

9,0

9,0

6,1

94

.32

)

Tota

l (

1,5

7,2

6,1

1,6

26

.18

) 1

,88

,21

,43

,00

0.0

0

30

,95

,31

,37

3.8

2

-

39

,65

,22

,78

6.1

7

1,1

9,1

9,5

0,5

54

.65

1

,58

,84

,73

,34

0.8

2

(1,2

7,8

9,4

1,9

67

.00

)

Pre

viou

s Ye

ar (

95

,28

,32

,03

2.9

3)

1,4

6,9

8,0

0,0

00

.00

5

1,6

9,6

7,9

67

.07

-

1

,01

,33

,51

,86

1.2

5

1,0

7,6

2,2

7,7

32

.00

2

,08

,95

,79

,59

3.2

5

(1,5

7,2

6,1

1,6

26

.18

)


252N

AT

ION

AL

IN

ST

ITU

TE

OF

TE

CH

NO

LO

GY

, RO

UR

KE

LA

SC

HE

DU

LES

FO

RM

ING

PA

RT

OF

BA

LAN

CE

SH

EE

T A

S O

N 3

1.0

3.2

01

7

SC

HE

DU

LE :

04

- F

IXE

D A

SS

ETS

AS

ON

31

.03

.20

17

Am

ount

in `

SL

. N

OPA

RTI

CU

LAR

S

GR

OS

S B

LOC

K

DE

PR

EC

IATI

ON

N

ET

BLO

CK

As

At be

gini

ng o

f ye

ar

Add

itio

ns d

urin

g th

e ye

ar

Del

etio

ns/

adju

stm

ents

dur

ing

the

year

A

s at

the

yea

r en

d A

s A

t be

ginn

ing

of

year

F

or t

he y

ear

Del

etio

ns/

adju

stm

ents

du

ring

the

yea

r U

pto

end

of t

he y

ear

As

at t

he c

urre

nt

year

end

A

s at

the

pre

viou

s ye

ar e

nd

A

B

C

D=A

+B

+C

E

F

G

H

=E

+F+

G

I=D

-H

J=A

-E

AFI

XED

AS

SE

TS

INS

TITU

TE

1La

nd 4

,38

,87

8.0

0

1.0

0

-

4,3

8,8

79

.00

-

-

-

-

4

,38

,87

9.0

0

4,3

8,8

78

.00

2B

uild

ing

3,8

1,0

3,9

7,4

39

.00

4

4,3

0,4

7,1

41

.00

-

4

,25

,34

,44

,58

0.0

0

64

,31

,34

,98

2.2

9

8,5

0,6

8,9

01

.00

-

7

2,8

2,0

3,8

83

.29

3

,52

,52

,40

,69

6.7

1

3,1

6,7

2,6

2,4

57

.00

3S

cien

ce E

quip

men

ts 1

,01

,22

,60

,93

5.8

0

1,7

6,9

4,0

40

.43

-

1

,02

,99

,54

,97

6.2

3

50

,56

,36

,32

9.2

3

8,2

3,9

6,3

79

.00

-

5

8,8

0,3

2,7

08

.23

4

4,1

9,2

2,2

68

.00

5

0,6

6,2

4,6

07

.00

4C

ompu

ter

/P

erip

hera

ls 4

3,3

9,7

6,2

47

.81

2

,46

,01

,09

1.5

5

-

45

,85

,77

,33

9.3

6

35

,26

,67

,15

6.0

7

3,8

9,4

2,1

44

.68

-

3

9,1

6,0

9,3

00

.75

6

,69

,68

,03

8.6

1

8,1

3,0

9,0

92

.00

5Li

brar

y B

ooks

14

,89

,24

,99

5.0

0

56

,52

,59

3.0

0

-

15

,45

,77

,58

8.0

0

10

,89

,89

,66

7.0

0

1,5

4,5

7,7

59

.00

-

1

2,4

4,4

7,4

26

.00

3

,01

,30

,16

2.0

0

3,9

9,3

5,3

28

.00

6Fu

rnit

ure

& F

ixtu

re 2

2,1

6,9

9,5

68

.00

5

6,9

2,4

54

.00

-

2

2,7

3,9

2,0

22

.00

7

,99

,96

,26

5.1

8

1,7

0,5

4,4

52

.00

-

9

,70

,50

,71

7.1

8

13

,03

,41

,30

4.8

2

14

,17

,03

,30

3.0

0

7P

lant

,M

achi

nery

&

Equ

ipm

ents

28

,31

,53

,44

8.8

3

1,6

8,1

3,3

57

.00

-

2

9,9

9,6

6,8

05

.83

1

6,5

5,9

9,9

01

.42

1

,09

,56

,89

4.9

4

-

17

,65

,56

,79

6.3

6

12

,34

,10

,00

9.4

7

11

,75

,53

,54

7.0

0

8Ve

hicl

es 5

,68

,27

0.0

0

-

-

5,6

8,2

70

.00

5

,68

,26

9.0

0

-

-

5,6

8,2

69

.00

1

.00

1

.00

9Fi

xed

Ass

et B

elow

R

s. 5

00

0 3

,74

,71

,63

5.0

0

31

,87

,13

6.0

0

-

4,0

6,5

8,7

71

.00

3

,74

,71

,63

5.0

0

31

,87

,13

6.0

0

-

4,0

6,5

8,7

71

.00

-

-

TEQ

IP-I

10

Bui

ldin

g 1

,00

,28

,58

0.0

0

-

-

1,0

0,2

8,5

80

.00

1

,00

,28

,58

0.0

0

1,0

0,2

8,5

80

.00

11

Sci

ence

Equ

ipm

ents

11

,78

,43

,39

8.0

0

-

-

11

,78

,43

,39

8.0

0

11

,78

,43

,39

8.0

0

11

,78

,43

,39

8.0

0

12

Libr

ary

Boo

ks 6

0,1

3,3

63

.00

-

-

6

0,1

3,3

63

.00

6

0,1

3,3

63

.00

6

0,1

3,3

63

.00

13

Furn

itur

e 4

0,3

8,6

14

.00

-

-

4

0,3

8,6

14

.00

4

0,3

8,6

14

.00

4

0,3

8,6

14

.00

TEQ

IP I

I

14

Sci

ence

Equ

ipm

ents

9,0

1,4

6,0

20

.00

1

,77

,47

,71

9.0

0

-

10

,78

,93

,73

9.0

0

10

,78

,93

,73

9.0

0

9,0

1,4

6,0

20

.00

15

Com

pute

r /

Per

iphe

rals

79

,20

,53

0.0

0

-

-

79

,20

,53

0.0

0

79

,20

,53

0.0

0

79

,20

,53

0.0

0

16

Furn

itur

e 4

7,1

59

.00

4

7,1

59

.00

4

7,1

59

.00

4

7,1

59

.00

17

Pla

nt ,

Mac

hine

ry &

E

quip

men

ts 1

3,6

2,1

18

.00

3

,80

,61

0.0

0

-

17

,42

,72

8.0

0

17

,42

,72

8.0

0

13

,62

,11

8.0

0

TOTA

L (A

) 6

,18

,62

,91

,19

9.4

4

53

,48

,16

,14

2.9

8

-

6,7

2,1

1,0

7,3

42

.42

1

,89

,40

,64

,20

5.1

8

25

,30

,63

,66

6.6

2

-

2,1

4,7

1,2

7,8

71

.81

4

,57

,39

,79

,47

0.6

2

4,2

9,2

2,2

6,9

95

.00

BC

AP

ITA

L (W

IP)

1B

uild

ing

2,3

2,5

6,4

6,4

71

.00

3

6,6

3,8

4,6

59

.00

4

5,4

6,1

9,5

19

.00

2

,23

,74

,11

,61

1.0

0

-

-

-

-

2,2

3,7

4,1

1,6

11

.00

2

,32

,56

,46

,47

1.0

0

2E

lect

rica

l Ins

talla

tion

20

,43

,63

,24

2.0

0

1,2

9,3

7,8

73

.00

1

,23

,45

,95

1.0

0

20

,49

,55

,16

4.0

0

-

-

-

-

20

,49

,55

,16

4.0

0

20

,43

,63

,24

2.0

0

3P

lant

, M

achi

nary

&

Equ

ipm

ent

4,0

4,8

7,5

04

.00

1

2,6

4,2

68

.00

2

,76

,50

,76

7.8

1

1,4

1,0

1,0

04

.19

-

-

-

-

1

,41

,01

,00

4.1

9

4,0

4,8

7,5

04

.00

TOTA

L (B

) 2

,57

,04

,97

,21

7.0

0

38

,05

,86

,80

0.0

0

49

,46

,16

,23

7.8

1

2,4

5,6

4,6

7,7

79

.19

-

-

-

-

2

,45

,64

,67

,77

9.1

9

2,5

7,0

4,9

7,2

17

.00

GR

AN

D T

OTA

L

(A

+B)

8,7

5,6

7,8

8,4

16

.44

9

1,5

4,0

2,9

42

.98

4

9,4

6,1

6,2

37

.81

9

,17

,75

,75

,12

1.6

1

1,8

9,4

0,6

4,2

05

.18

2

5,3

0,6

3,6

66

.62

-

2

,14

,71

,27

,87

1.8

1

7,0

3,0

4,4

7,2

49

.81

6

,86

,27

,24

,21

2.0

0

D.

PR

EVI

OU

S

YEA

R

7,7

2,6

1,1

7,7

75

.00

3

,08

,07

,45

,37

1.4

4

2,0

5,0

0,7

4,7

30

.00

8

,75

,67

,88

,41

6.4

4

1,6

3,6

2,3

4,5

23

.19

2

5,7

4,7

3,7

91

.00

3

,55

,89

1.0

0

1,8

9,4

0,6

4,2

05

.19

6

,86

,27

,24

,21

2.0

0

6,0

8,9

8,8

3,2

52

.00


253


SCHEDULE : 05 - INVESTMENTS FROM EARMARKED/ENDOWMENT FUND

Amount in `


1 Term Depsoits with Schedule Banks:

a. Corpus / Endowment / Earmarked Funds 52,18,60,639.61 37,44,45,162.34

b. SRICCE Funds 7,62,01,589.00 3,37,68,748.00

c. TEQIP Funds 4,08,43,547.00 4,92,37,147.00

d. Old Pension Fund 6,21,26,402.08 6,21,26,402.08

TOTAL 70,10,32,177.69 51,95,77,459.42

SCHEDULE : 06 - INVESTMENTS OTHERS

Amount in `


1 Securities / Debentures /Bonds - -

2 Others - -

TOTAL - -

SCHDULE : 07 - CURRENT ASSETS

Amount in `


1 Cash-in-hand (including cheques/ drafts and imprest) 1,487.59 1,487.59

2 Bank Balances:

a. -In Current Accounts 13,39,25,845.48 3,39,82,968.33

b. -In Savings Accounts 79,34,977.67 35,49,692.63

c. -Term Deposits 54,39,08,295.81 27,72,63,418.12

3 Bank Accounts - TEQIP-II 94,55,299.63 26,71,270.12

4 Bank Accounts - SRICCE 11,18,97,078.40 16,53,61,235.12

5 Bank Balance - Old Pension Fund 3,69,135.57 80,029.57

TOTAL 80,74,92,120.15 48,29,10,101.48

SCHEDULE : 08 - LOANS, ADVANCES & DEPOSITSAmount in `


A Institute

1. Loans & Advances

a. Advances to Supplier / Contractor 6,28,27,767.00 7,49,29,222.58

b. Advances to Staffs 41,26,823.00 68,57,850.00

c. Advances to Students 8,10,725.00 9,68,832.00

d. Advances to Others 8,64,228.00 3,51,801.00

2. Accrued Interest 28,44,306.00 88,77,678.00

3. Prepaid Expenses 48,29,322.00 58,62,037.00

4. Deposits 1,32,28,111.00 1,32,28,111.00


254

Amount in `


5 Other Receivables

a. Debit balances of Grant-in-Aid (Sch-3B) 1,27,89,41,967.00 1,57,26,11,626.18

b. Debit balances in Sponsored Projects - -

c. Debit balances in Fellowship & Scholarship - -

d. Grants Receivable 5,21,43,000.00 5,98,00,000.00

e. Other Receivables 2,13,696.76 55,55,662.00

f. Maintenance WIP 40,73,286.00 24,43,560.00

B TEQIP-II

1. Loans & Advances 30,12,488.00 15,40,439.00

C SRICCE


2. Loans & Advances 1,40,86,714.15 75,20,588.15

3. Other Receivables - -

D OLD PENSION FUND


2. Loans & Advances 1,27,63,479.00 81,49,337.00

3. Other Receivables 2,45,837.00 2,45,837.00

TOTAL 1,46,20,85,088.85 1,77,32,77,666.74

SCHEDULE:09 - ACADEMIC RECEIPTSAmount in `


FEES FROM STUDENTS

1 Tution Fee 29,28,59,534.19 26,72,02,736.84

2 Admission Fee 24,03,501.00 26,85,500.00

3 Mark Sheet, Certificate Fee 1,36,850.00 1,49,250.00

4 Other Fee 4,13,000.00 11,68,348.00

TOTAL 29,58,12,885.19 27,12,05,834.84

SCHEDULE : 10 - GRANTS & SUBSIDIES

Amount in `


1 Central Government 1,19,19,50,554.65 1,07,62,27,732.00

2 State Government - -

3 Others (Specify) - -

TOTAL 1,19,19,50,554.65 1,07,62,27,732.00

SCHEDULE : 08 - LOANS, ADVANCES & DEPOSITS (Counti...)


255

SCHEDULE : 11 - INCOME FROM INVESTMENTS

Amount in `


1 Interest Income 4,75,21,825.89 4,70,24,527.81

2 Others - -

Total 4,75,21,825.89 4,70,24,527.81

Less: Transferreed to Earmarked/Endowment Funds 4,75,21,825.89 4,70,24,527.81

TOTAL - -

SCHEDULE : 12 - INTEREST EARNED

Amount in `


1 Interest on Term Deposits: 41,36,778.00 50,42,217.00

2 Interest on Savings Accounts: 3,24,183.00 3,80,549.00

3 Interest On Loans:

a. Employees/Staff - -

b. Supplier / Contractor - 28,24,497.00

c. Others - -

4 Interest on Debtors & Other Receivables 2,50,884.00 -

TOTAL 47,11,845.00 82,47,263.00

SCHEDULE : 13 - OTHER INCOMEAmount in `


A Income from Land & Building

1. Hostel Room Rent 2,56,42,500.00 2,61,79,000.00

2. License fee 59,80,086.00 60,74,362.00

3. Guest House Rent / Hire Charges 26,23,967.00 27,67,933.00

4. Others 6,47,850.00 5,10,048.00

TOTAL 3,48,94,403.00 3,55,31,343.00

B Sale of Institute 's Publications - -

C Income from holding events - -

D Others

1. RTI fees 988.00 1,458.00

2. Sale of Application Form (Recruitment) 11,82,688.55 19,92,393.60

3. Misc. Receipts (Sale of tender form, waste paper, etc.) 2,100.00 58,450.00

4. Profit on Sale/disposal of Assets: - -

5. Sale of Scrap - -

6. Other Income 6,70,548.18 4,96,093.87

TOTAL 18,56,324.73 25,48,395.47

GRAND TOTAL (A+B+C+D) 3,67,50,727.73 3,80,79,738.47


256

SCHEDULE : 14 PRIOR PERIOD INCOME

Amount in `


1 Prior Period Income - -

TOTAL - -

SCHEDULE : 15 STAFF PAYMENTS & BENEFITS

Amount in `


1 Salary & Wages 56,48,39,989.00 51,63,84,857.00

2 Allowances & Bonus 22,26,099.00 10,46,285.00

3 Contribution to Provident Fund 15,51,148.00 20,20,479.00

4 Contribution to New Pension Scheme 2,87,15,310.00 2,44,53,714.00

5 Staff Welfare Expenses 1,10,31,748.00 1,12,72,413.00

6 Retirement &Terminal Benefits 15,02,11,750.00 11,41,69,845.00

7 LTC Facility 95,37,724.00 99,77,660.00

8 Medical Facility 2,32,97,922.94 1,99,35,513.00

9 Children Education Allowance 43,79,477.00 50,89,935.00

10 Other Payments - -

TOTAL 79,57,91,167.94 70,43,50,701.00

SCHEDULE : 16 ACADEMIC EXPENSESAmount in `


1 Departmental Operating Expenses 2,53,18,819.50 2,57,10,029.00

2 Remuneration to Visiting Faculty 33,65,605.00 37,99,925.14

3 Examination - -

4 Student Welfare Expenses 46,53,248.00 44,61,628.00

5 Admission Expenses - 6,87,000.00

6 Convocation Expenses 5,40,623.00 12,93,367.00

7 Publications - -

8 Stipend/means-cum-merit scholarship 30,00,20,572.00 27,84,11,751.00

9 License Fee & Subscription Expenses 2,80,53,788.00 2,87,11,956.00

10 Other Academic Exp 3,00,000.00 2,37,235.00

TOTAL 36,22,52,655.50 34,33,12,891.14


257

SCHEDULE : 17 -ADMINISTRATIVE AND GENERAL EXPENSES

Amount in `


1 Advertisement and Publicity 23,36,521.00 40,66,751.00

2 Auditors Remunaration 50,000.00 50,000.00

3 Electricity and Power (Net) 5,93,02,795.00 5,85,98,752.88

4 Hospitality 7,35,845.00 15,01,399.00

5 Insurance - -

6 Internet Charges 28,44,630.00 8,11,467.00

7 Legal Expenses 99,260.00 23,48,318.00

8 Other Admin Expenses 49,92,138.58 26,89,029.14

9 Outsourced Services 4,29,20,932.00 3,64,29,702.00

10 Postage, Telephone & Communication Expenses 30,18,360.00 33,19,103.00

11 Printing & Stationary 50,38,753.00 61,97,264.00

12 Professional Charges 1,20,635.00 66,402.00

13 Rent, Rates and Taxes - -

14 Stipendary Trainees/Teaching Asstt. Remuneration 53,69,580.00 71,51,791.00

15 Training to faculty & staff - -

16 Travelling and Conveyance Expenses 71,89,940.87 99,22,096.68

17 Water Charges (Net) 14,96,287.00 15,74,589.00

TOTAL 13,55,15,677.45 13,47,26,664.70

SCHEDULE : 18 TRANSPORTATION EXPENSESAmount in `


1 Vehicle Running & Maintenance 7,29,429.00 6,76,456.00

TOTAL 7,29,429.00 6,76,456.00

SCHEDULE : 19 - REPAIRS & MAINTENANCE

Amount in `


1 Building 3,53,10,872.00 2,74,14,806.00

2 Furniture & Fixture 4,29,675.00 18,00,471.00

3 Plant, Machinery & Equipments 1,88,62,820.67 1,28,03,913.00

4 Computer 43,91,695.00 26,50,524.00

5 Others - -

TOTAL 5,89,95,062.67 4,46,69,714.00


258

SCHEDULE : 20 - FINANCE COSTS

Amount in `


1 Interest on Fixed Loans -

2 Interest on Other Loans - 26,50,227.00

3 Bank Charges 2,86,370.51 2,27,884.32

4 Others -

TOTAL 2,86,370.51 28,78,111.32

SCHEDULE : 21 - OTHER EXPENSES

Amount in `


1 Provision for Bad and Doubtful Debts/Advances - -

2 Irrecoverable Balances Written-off - -

3 Others - -

TOTAL - -

SCHEDULE : 22 - PRIOR PERIOD ITEMS

Amount in `


1 Prior Period Items 70,17,920.54 2,04,99,432.00

TOTAL 70,17,920.54 2,04,99,432.00



259

SCHDULES 23 - SIGNIFICANT ACCOUNTING POLICIES

1 ACCOUNTING CONVENTION

The financial statements are prepared on the basis of historical cost convention, unless otherwise stated and on the accrual method of accounting.

The financial statements are broadly prepared on the basis of format prescribe by Ministry of HRD for Central Autonomous Bodies.

2. INVESTMENTS

Investments are valued at cost.

3. FIXED ASSETS

a. Fixed Assets are stated at cost of acquisition inclusive of inward and other incidental expenses. Buildings / permanent structures are capitalized from the date project is taken over after due verification and corrections.

b. Fixed assets acquired by grants or received by way of donation are capitalized at cost / value stated, by corresponding credit to Deferred Income - Capital Fund A/c.

c. Fixed Assets acquired out of Earmarked/Endowment Funds (e.g. SRICCE Fund) being the assets of the Fund provider are deducted from the respective Fund Account as Capital expenditure & are not taken into Account in the Fixed Assets of the Institute shown under Schedule-4.

4. DEPRECIATION

a. Depreciation method has been charged on Straight Line Method(SLM) as per rates specified in format of Financial Statement.

b. Depreciation on assets where actual cost is equal to or less than Rs.5,000/- item-wise is provided at the rate of 100%. In case of capital works depreciation is charged from the date project is taken over by institute authorities, after its completion and verification for intended use.

c. As specified in AS-12, Grants utilized for creation of capital assets are treated as Deferred Income (Schedule 1) and recognized in Income and Expenditure Account on a systematic and rational basis over the useful life of the assets, i.e. Capital grants / Funds are allocated to Income over the periods and in the proportion in which depreciation is charged.

d. Depreciation in not charged on fixed assets acquired out of TEQIP Grants, as per the terms & condition of TEQIP-NPIU.

5. REVENUE RECOGNITION

a. Fees from students, Interest on Saving Bank Account are accounted on cash basis.

b. Income from Land, Buildings and Other Property and Interest on Investments are accounted on accrual basis.

6. GOVERNMENT GRANTS

a. Government grants are accounted on the basis of sanction from Government Department.

b. Grants utilized for meeting recurring expenses are credited to Grants / Subsidies Head under Income and Expenditure A/c.

c. Grants / Funds utilized for capital expenditure is credited to Deferred Income – Capital Fund A/c (Schedule – 1).

7. INTEREST ON INVESTMENTS

Interest on investments out of Corpus, Endowment and other fund are allocated to respective Fund Account.

8. FOREIGN TRANSACTIONS

Transactions denominated in foreign currency are accounted at actuals.

9. RETIREMENT BENEFITS

a. Amount received towards the Retirement Benefits to existing employees is credited to Retirement Benefit Fund Account.

b. Liabilities towards gratuity payable on death/retirement of employees are provided based on actual valuation.

c. Liabilities towards pension payable on retirement of employees are provided based on actual valuation.

d. Leave encashment benefit (arrear) to the employee is accounted on actual valuation.


260

10. CONTINGENT LIABILITIES

Provision is made for all known liabilities, Contingent liabilities, if any are disclosed in the accounts by way of note.

SCHEDULE 24 – CONTINGENT LIABILITIES AND NOTES ON ACCOUNT

1. Plan and Non-Plan Grants

Details of funds under Plan, Non-Plan and IRG heads are as under:

Amount in crore

Particulars Plan Grants Non-Plan Grants IRG Total

Op Balance (123.46) (33.80) 0.00 (157.26)

Add: Received during the year 80.21 108.00 33.73 221.94

Grants available for expenditure (43.25) 74.20 33.73 64.68

Less: Utilization

a. Capital Expenditure 39.65 0.00 0.00 39.65

b. Revenue Expenditure 35.90 83.29 16.87 136.06

c. Transfer 0.00 0.00 16.86 16.86

Closing Balance(A) (118.80) (9.09) 0.00 (127.89)

Less: Advances Paid for Expenditure

Advance Paid 6.29 0.48 0.00 6.77

Open L / c’s for procurement 0.00 0.00 0.00 0.00

Maintenance WIP 0.41 0.00 0.00 0.41

Prepaid Expenses 0.00 0.48 0.00 0.48

Total Advances (B) 6.70 0.96 0.00 7.66

NET FUND (RECEIVABLE) FROM MHRD(A-B) (125.50) (10.05) 0.00 (135.55)

Debit balances of grants are carried over expecting its realization.

2. CONTINGENT LIABILITIES

a. Income Tax demand in dispute Rs.69.36 Lakhs.


261

3. NOTES ON ACCOUNT

a. In the opinion of management the Current Assets, Loans and Advances of the organization have a value on realization in the ordinary course of business, equal to or at least the aggregate amount shown in the Balance Sheet and the Provisions for liabilities are adequate.

b. Corresponding figure for the previous years have been excluded/regrouped/rearranged, wherever found necessary.

c. Schedule-1:Balance of Deferred Income - Capital Fund has been shifted to Schedule-1, as envisaged in New Format.

d. Schedule-4:Fixed Assets:

i. Straight Line Method has been adopted for charging depreciation from 01-04-2015, as envisaged in new format.

e. Capital assets acquired out of Sponsored Project(s), amounts to:

Particulars Prior to Incorporation of SRICCE

SRICCE Fund Total

Opening Balance 8,27,50,334/- 40,57,84,065/- 48,85,34,399/-

Rectification for difference in opening balance Nil Nil Nil

Addition during the year Nil 7,73,76,401/- 7,73,76,401/-

Deletion during the year Nil Nil Nil

Balance at the year end 8,27,50,334/- 48,31,60,466/- 56,59,10,800/-



262

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELARECEIPT AND PAYMENT ACCOUNT FOR THE PERIOD 01-04-2016 TO 31-03-2017

RECEIPTS

Sl.No. Particulars Amount (`) Amount (`)

1 OPENING BALANCE 3,75,34,148.55

a. Cash-in-hand(Institute) -

b. Bank Draft/Cheque-in hand 1,487.59

c. Bank Balance

i) In current Account(Institute) 3,39,82,968.33

ii) In savings a/c(Institute) 35,49,692.63

3,75,34,148.55

2 Corpus Fund 15,18,90,969.13 15,18,90,969.13

3 Restricted Funds 2,80,84,792.09

a. Staff Welfare Fund 1,700.00

b. Endowment Fund(Inst.) 88,86,948.09

c. External Fellowship 1,02,19,943.00

d. External Scholarship 82,90,103.00

e. Retirement Benefit 6,86,098.00

2,80,84,792.09

4 Loans / Borrowings 2,50,00,000.00

a. Secured

b. SRICCE (Unsecuerd Laon) 2,50,00,000.00

2,50,00,000.00

5 Current Liabilities & Provisions 54,86,75,102.19

a. Sundry Creditors 19,64,323.25

b. Accounts Payables and Other Liabilities 47,04,632.00

c. Advance Receipts 45,68,53,073.94

d. Security Deposit 4,48,98,944.00

e. Statutory Liability 4,02,54,129.00

54,86,75,102.19

6 Investments 1,65,19,93,589.40

a. Investment Misc A/c 1,51,22,877.00

b. Investment Non-Plan A/c 37,48,73,924.06

c. Investment PG Reasearch A/c 64,68,740.00

d. Investment Plan A/c 37,35,54,399.00

e. Investment Security Deposit A/c 8,68,25,153.00

f Investment student Fee A/c 66,36,00,000.00

g Investment Caution Money A/c 1,02,49,227.00

h Investment From Earmarked/Endowment 12,12,99,269.34

1,65,19,93,589.40


263

RECEIPTS


7 Fixed Assets 66,08,983.00

Capital Work in Progress 66,08,983.00

8 Current Assets 31,78,61,975.79

a. Loans & Advances (Asset) 8,59,76,041.00

b. Other Current Assets 23,11,85,934.79

31,78,61,975.79

9 Academic Receipts 1,90,77,207.02

a. Fees/Subscription 1,90,77,207.02

10 GRANT RECEIVED 1,83,00,00,000.00

a. Central Govt. (Plan) 75,00,00,000.00

b. Central Govt.(Non-Plan) 1,08,00,00,000.00

1,83,00,00,000.00

11 Income From Investments 83,84,240.00

a. Income From Investments 38,88,261.00

b. Interest Earned 44,95,979.00

83,84,240.00

12 Other Income 15,38,599.70

a. Other Income 15,36,499.70

b. Education Verification Charges 2,100.00

15,38,599.70

13 Indirect Expenditure 44,87,640.43

a. Prior Period Expenses 2,92,987.00

b. Academic Expenses 18,43,124.00

c. Establishment Expenses 2,11,743.00

d. Finance Cost 107.43

e. Administrative and General Expenses 21,39,679.00

44,87,640.43

GRAND TOTAL 4,63,11,37,247.30



264

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELARECEIPT AND PAYMENT ACCOUNT FOR THE PERIOD 01-04-2016 TO 31-03-2017

PAYMENTS


1 Corpus Fund 40,607.00 40,607.00

2 Designated Fund

a. Funds For Maintanance of Assets - -

b. Staff Development Fund -

c. Funds For Capital Expenditure -

3 Restricted Funds 55,128.50

a. Staff Welfare Fund -

b. Endowment Fund(Inst.) 55,128.50

c. External Fellowship -

d. External Scholarship -

55,128.50

4 Current Liabilities & Provisions 2,37,60,10,635.89

a. Provisions 7,17,12,692.83

b. Sundry Creditors 1,53,38,90,607.14

c. Accounts Payables and Other Liabilities 7,47,02,290.72

d. Advance Receipts 12,50,169.00

e. Other Current Liabilities 11,54,11,340.00

f. Security Deposit 70,72,748.00

g Grant/Other Fund 34,78,437.00

h Salary & Wages 36,80,97,215.20

i Statutory Liability 20,03,95,136.00

2,37,60,10,635.89

5 Loans / Borrowings 2,50,00,000.00

a. Secured 2,50,00,000.00

2,50,00,000.00

6 Fixed Assets 8,54,004.85

a. Science Equipments 8,54,004.85

8,54,004.85

7 Investments 2,03,77,39,190.50

a. Investment Misc A/c 2,70,00,000.00

b. Investment Non-Plan A/c 61,19,76,064.00

c. Investment PG Reasearch A/c 70,19,092.75

d. Investment Plan A/c 43,65,00,000.00

e. Investment student Fee A/c 69,32,00,000.00

f. Investment Application Fee A/c 8,00,000.00

g Investment Staff wellfare A/c 17,37,750.00

h Investment Caution Money A/c 2,68,67,041.00

i Investments From Endowment Fund 23,26,39,242.75

2,03,77,39,190.50

8 Current Assets 4,74,06,872.80

a. Loans & Advances (Asset) 4,64,79,079.80

b. Other Current Assets 9,27,793.00

4,74,06,872.80


265

PAYMENTS


9 Direct Income 35,000.00

a. Fees/Subscription 35,000.00

10 Indirect Income 8,000.00

a. Income From Investments 6,500.00

b. Other Income 1,500.00

8,000.00

11 EXPENDITURE 21,25,497.02

a. Staff Payments & Benefits -

b. Academic Expenses 9,54,613.00

c. Establishment expenses 1,36,415.00

d Administrative and General Expenses 3,02,456.00

e Finance Cost 2,82,791.44

f. Prior Period Items 4,49,221.58

21,25,497.02

12 CLOSING BALANCE 14,18,62,310.74

a. Cash-in-hand

b. Bank Draft/Cheques in hand 1,487.59

c. Bank Balance

i) In current Account(Institute) 13,39,25,845.48

ii) In savings a/c(Institute) 79,34,977.67

14,18,62,310.74

GRAND TOTAL 4,63,11,37,247.30



266N

AT

ION

AL

IN

ST

ITU

TE

OF

TE

CH

NO

LO

GY

, RO

UR

KE

LA

Fund

wis

e In

com

e &

Exp

endi

ture

Sta

tem

ent

for

the

FY 2

01

6-1

7

Am

ount

in `

Par

ticu

lars

Sch

edul

eP

lan

Non

Pla

nIR

GTE

QIP

-II

NM

EIC

TS

IPD

AIn

no-I

cub

Cen

tre

Def

fere

d In

com

eTo

tal

INC

OM

E

Aca

dem

ic R

ecei

pts

9 2

9,5

8,1

2,8

85

.19

2

9,5

8,1

2,8

85

.19

Gra

nts

& D

onat

ions

10

35

,90

,15

,63

4.6

7

83

,29

,34

,91

9.9

8

-

-

1,1

9,1

9,5

0,5

54

.65

Inco

me

from

Inv

estm

ents

11

-

-

-

-

Inte

rest

Ear

ned

12

-

-

47

,11

,84

5.0

0

47

,11

,84

5.0

0

Oth

er I

ncom

e1

3 3

,67

,50

,72

7.7

3

3,6

7,5

0,7

27

.73

Tran

sfer

Fro

m F

unds

4 -

-

-

2

5,3

0,6

3,6

66

.62

2

5,3

0,6

3,6

66

.62

Pri

or P

erio

d In

com

e -

-

-

-

Tota

l (A

) 3

5,9

0,1

5,6

34

.67

8

3,2

9,3

4,9

19

.98

3

3,7

2,7

5,4

57

.92

-

-

-

-

2

5,3

0,6

3,6

66

.62

1

,78

,22

,89

,67

9.1

9

EXP

EN

DIT

UR

E

Sta

ff P

aym

ents

& B

enefi

ts1

5 -

7

9,5

7,9

1,1

67

.94

-

7

9,5

7,9

1,1

67

.94

Aca

dem

ic E

xpen

ses

16

30

,00

,20

,57

2.0

0

6,2

2,3

2,0

83

.50

3

6,2

2,5

2,6

55

.50

Adm

inis

trat

ive

and

Gen

eral

E

xpen

ses

17

3,6

8,5

7,3

81

.53

9

,86

,58

,29

5.9

2

13

,55

,15

,67

7.4

5

Tran

spor

tati

on E

xpen

ses

18

-

7,2

9,4

29

.00

7

,29

,42

9.0

0

Rep

airs

& M

aint

enan

ce1

9 5

,89

,95

,06

2.6

7

5,8

9,9

5,0

62

.67

Fina

nce

Cos

t2

0 -

2

,86

,37

0.5

1

-

2,8

6,3

70

.51

Dep

reci

atio

n fo

r th

e ye

ar4

-

-

-

25

,30

,63

,66

6.6

2

25

,30

,63

,66

6.6

2

Oth

er E

xpen

ses

21

-

-

-

Pri

or P

erio

d It

ems

22

-

-

70

,17

,92

0.5

4

70

,17

,92

0.5

4

Tran

sfer

to

Fund

s 1

5,0

0,0

0,0

00

.00

1

50

00

00

00

.00

35

,90

,15

,63

4.6

7

83

,29

,34

,91

9.9

8

31

,86

,37

,72

8.9

6

-

-

-

-

25

,30

,63

,66

6.6

2

1,7

6,3

6,5

1,9

50

.23

SU

RP

LUS

/ (D

EFI

CIT

) Tr

ansf

erre

d to

Gen

eral

Fun

d (A

-B)

-

-

1,8

6,3

7,7

28

.96

-

-

-

-

-

1

,86

,37

,72

8.9

6


267N

AT

ION

AL

IN

ST

ITU

TE

OF

TE

CH

NO

LO

GY

, RO

UR

KE

LA

Det

aled

Fun

d S

tatu

s fo

r th

e FY

20

16

-17

Am

ount

in `

Par

ticu

lars

Pla

n G

rant

sN

on-P

lan

Gra

nts

IRG

TEQ

IP-I

IN

ME

ICT

SIP

DA

Inno

-Icu

b C

entr

eS

AC

Fun

dB

ook

Fund

Med

ical

Fun

dTo

tal

Op.

Bal

ance

-1

,23

,46

,40

,35

1.8

4

-3

3,7

9,7

1,2

74

.34

-

4

,70

,31

,82

9.1

2

1,7

8,2

02

.00

1

,87

,50

,00

0.0

0

55

,00

,00

0.0

0

-

-

-

-1,5

0,1

1,5

1,5

95

.06

Add

: R

ecei

ved

duri

ng

the

year

80

,21

,43

,00

0.0

0

1,0

8,0

0,0

0,0

00

.00

3

3,7

2,7

5,4

57

.92

5

,45

,87

,38

3.0

0

-

-

-

2,1

3,1

0,0

00

.00

9

1,0

5,4

81

.00

1,0

5,9

6,0

00

.00

2

,31

,50

,17

,32

1.9

2

Gra

nts

avai

labl

e fo

r ex

pend

itur

e (A

) -

43

,24

,97

,35

1.8

4

74

,20

,28

,72

5.6

6

33

,72

,75

,45

7.9

2

10

,16

,19

,21

2.1

2

1,7

8,2

02

.00

1

,87

,50

,00

0.0

0

55

,00

,00

0.0

0

2,1

3,1

0,0

00

.00

9

1,0

5,4

81

.00

1,0

5,9

6,0

00

.00

8

1,3

8,6

5,7

26

.86

Exp

endi

ture

s: -

a. C

apti

al E

xpen

ditu

re 3

9,6

5,2

2,7

86

.17

-

-

1

,81

,28

,32

9.0

0

1,7

8,2

02

.00

5

3,4

6,8

92

.00

-

-

-

4

2,0

1,7

6,2

09

.17

b. R

even

ue E

xpen

ditu

re

as p

er I

ncom

e &

E

xpen

ditu

re S

tate

men

t

35

,90

,15

,63

4.6

7

83

,29

,34

,91

9.9

8

16

,86

,37

,72

8.9

6

3,2

5,1

4,3

42

.49

-

-

1

,58

,88

,26

4.0

0

79

,78

,33

3.5

0

1

,62

,84

,88

5.9

8

1,4

3,3

2,5

4,1

09

.58

Tota

l Exp

endi

ture

(B

) 7

5,5

5,3

8,4

20

.84

8

3,2

9,3

4,9

19

.98

1

6,8

6,3

7,7

28

.96

5

,06

,42

,67

1.4

9

1,7

8,2

02

.00

-

5

3,4

6,8

92

.00

1

,58

,88

,26

4.0

0

79

,78

,33

3.5

0

1,6

2,8

4,8

85

.98

1

,85

,34

,30

,31

8.7

5

Clo

sing

Bal

ance

(A

-B)

-1

,18

,80

,35

,77

2.6

8

-9

,09

,06

,19

4.3

2

16

,86

,37

,72

8.9

6

5,0

9,7

6,5

40

.63

-

1

,87

,50

,00

0.0

0

1,5

3,1

08

.00

5

4,2

1,7

36

.00

1

1,2

7,1

47

.50

-

56

,88

,88

5.9

8

-1,0

3,9

5,6

4,5

91

.89

Ref

und/

Tra

nsfe

rred

to

/Fr

om F

und

54

,21

,73

6.0

0

11

,27

,14

7.5

0

-5

6,8

8,8

85

.98

8

,59

,99

7.5

2

Fund

s fo

r C

apti

al

Exp

endi

ture

7,5

0,0

0,0

00

.00

7

,50

,00

,00

0.0

0

Fund

s fo

r A

cade

mic

A

ctiv

itie

s 2

,50

,00

,00

0.0

0

2,5

0,0

0,0

00

.00

Fund

s fo

r M

ante

nanc

e of

Ass

ets

2,5

0,0

0,0

00

.00

2

,50

,00

,00

0.0

0

Sta

ff D

evel

opm

ent

Fund

2,5

0,0

0,0

00

.00

2

,50

,00

,00

0.0

0

Gen

eral

Res

erve

1

,86

,37

,72

8.9

6

1,8

6,3

7,7

28

.96

Ref

unds

/Tra

nsfe

r -

Less

: A

dvan

ces

Pai

d fo

r E

xpen

ditu

re -

Adv

ance

s P

aid

6,2

8,6

0,6

75

.00

4

8,2

8,5

15

.00

-

6

,76

,89

,19

0.0

0

Mai

nten

ance

WIP

4

0,7

3,2

86

.00

4

0,7

3,2

86

.00

Pre

paid

Exp

ense

s -

4

8,2

9,3

22

.00

-

4

8,2

9,3

22

.00

Tota

l Adv

ance

s (B

) 6

,69

,33

,96

1.0

0

96

,57

,83

7.0

0

16

,86

,37

,72

8.9

6

-

-

-

-

54

,21

,73

6.0

0

11

,27

,14

7.5

0

-5

6,8

8,8

85

.98

2

4,6

0,8

9,5

24

.48

NE

T FU

ND

RE

CE

IVA

BLE

(A

-B)

-1

,25

,49

,69

,73

3.6

8

-1

0,0

5,6

4,0

31

.32

-

5

,09

,76

,54

0.6

3

-

1,8

7,5

0,0

00

.00

1

,53

,10

8.0

0

-

-

-

-1,2

8,5

6,5

4,1

16

.37


268

NATIONAL INSTITUTE OF TECHNOLOGY, ROURKELACapital Expenditure from Plan Grant during the FY 2016-17

Amount in `

Particulars As at 31-03-2016 Debit Credit As at 31-03-2017

Capital Work in Progress 2,57,04,97,216.81 38,05,86,800.00 49,46,16,237.81 2,45,64,67,779.00

Building 3,16,72,62,456.00

44,30,47,141.00 8,50,68,901.00 3,52,52,40,696.00

Computers / Peripherals 8,13,09,091.81 2,46,01,091.55 3,89,42,144.68 6,69,68,038.68

Furniture and Fixtures 14,17,03,304.00 56,92,454.00 1,70,54,452.00 13,03,41,306.00

Land 4,38,878.00 1.00 - 4,38,879.00

Library Books 3,99,35,328.00 56,52,593.00 1,54,57,759.00 3,01,30,162.00

Plant, Machinery and Equipments 11,75,53,546.83 1,68,13,357.00 1,09,56,894.94 12,34,10,008.89

Science Equipments 50,66,24,606.80 1,76,94,040.43 8,23,96,379.00 44,19,22,268.23

Vehicles 1.00 - 1.00

Fixed Assets (Below Rs.5000/-) - 31,87,136.00 31,87,136.00 -

TEQIP Phase-I 13,79,23,955.00 - - 13,79,23,955.00

TEQIP Phase-II 9,94,75,827.00 1,81,28,329.00 - 11,76,04,156.00

Total 6,86,27,24,211.25

91,54,02,942.98 74,76,79,904.43 7,03,04,47,249.80

Add: Depreciation charged during the FY 2016-17

25,30,63,666.62

Prior Period Item (Depreciation) 6,10,496.00

Deferred Income - Plan Expenditure (reversal of revenue)

-

Less: Opening Balance of Fixed Asset 6,86,27,24,211.25

Cost of Assets acquired 42,01,76,209.17

Particulars Plan NMEICT TEQIP PH-II TIIR

Computers / Peripherals - 2,86,000.00

Science Equipments 1,77,47,719.00 -

Plant Machinery & Equipments 1,78,202.00 3,80,610.00 50,60,892.00

Fixed Assets (Below Rs.5000/-) - -

Capital Expenditure Grant wise 39,65,22,786.17 1,78,202.00 1,81,28,329.00 53,46,892.00