avnet embedded specification.€¦ · 17-sep-2009 umsh-8252md-t version no. 1 yu-lun tseng jeffry...
TRANSCRIPT
Avnet Embedded. Support Around The Board™
www.avnet-embedded.eu
AvnET EmBEddEd SpEcificATion.
datasheetURT
UMSH-8252MD-T
SPECIFICATION
LIQUID CRYSTAL DISPLAY MODULE
CUSTOMER :
Model No. :
Model version : 3
Document Revision : 3
This specification need to be signed by purchaser or customer as a specification of productsproduction and delivery from URT. Without signature of this specification , any purchaseorder for this model no. will be treated and considered that this specification is automaticallyacknowledged and accepted by purchaser or customer.
UNITED RADIANT TECHNOLOGY CORPORATION
George Tseng Date
COMPANY : No. 2,Fu-hsing Road,Taichung Econamic Processing Zone,Tantzu,Taichung,Taiwan,R.O.C.
TEL: 886-4-25314277 FAX: 886-4-25313067
Mar-05-2010
URT-STD
UMSH-8252MD-T
OF
This document has been signed by Digital Signature Approval System
CUSTOMER APPROVED SIGNATURE
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 1
Allen Wang Angus Chiu Sharon Tsai Mar-05-2010APPROVED CHECKED CHECKED PREPARED
U.R.T.
U.R.T.
Document Model No. Revision
Revision Version No. by
0
1
2
3 Modify the initial code. UMSH-8252MD-TVersion No. 3
Jeffry ChenKen Lin05-Mar-2010
Modify the Back-light only Specification.UMSH-8252MD-TVersion No. 2
Jeffry ChenKen Lin17-Sep-2009
UMSH-8252MD-TVersion No. 1
Yu-Lun TSENGJeffry Chen31-Jul-2009
Modify the initial code.
Description
Revision record
UMSH-8252MD-TVersion No. 0
H.C. LinJeffry Chen19-Nov-2008
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 2U.R.T.
CONTENTS:
No. Item PageBASIC SPECIFICATION
1 1.1 Mechanical Specification 41.2 Display Specification 41.3 Outline Dimension 51.4 Block Diagram 61.5 Interface Pin 7~9
ELECTRICAL CHARACTERISTICS2 2.1 Absolute Maximum Ratings 10
2.2 DC Characteristics 112.2.1 Back-light 112.3 Command 12~132.4 AC Characteristics 14~21
OPTICAL CHARACTERISTICS3 3.1 Condition 22
3.2 Definition of Optical Characteristics 23~24
4 RELIABILITY 25
5 PRODUCT HANDING AND APPLICATION 26
6 DATECODE 27
7 PACKING & LOTNO 28~29
8 INSPECTION STANDARD 30~33
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 3U.R.T.
1. BASIC SPECIFICATION
1.1 Mechanical specifications
Items
Active screen size
Dot Matrix
Module Size (W x H x T)
Active Area (W x H)
Dot Pitch (W x H)
Driving IC Package
1.2 Display specification
LCD TypeLCD ModePolarizer ModePolarizer SurfacePixel arrangementBacklight Type Viewing Direction
NormalRGB-stripe -
-
g
Transmissive
Interface
1. 8/ 9/ 16/ 18-bit 6800-series / 8080-series Parallel Interface2. Serial Peripheral Interface (SPI)3. 18-/6-bit RGB interface (DEN, DOTCLK, HSYNC, VSYNC, DB[17:0])4. VSYNC interface (system interface + VSYNC)5. WSYNC interface (system interface + WSYNC)
---
* The maximum color depth of this driver IC is 262K colors ,not 16.7M.
Module weight 32
mm.
mm.
70.08 x 52.56
Color depth 262K color
-
-
Nominal Dimension Unit
dots
mm.
320*RGB*240
76.9 x 63.9 x 3.2
3.5” diagonal -
4
6 O'clock Direction
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010
0.219 x 0.219
a-Si TFTTN / Normal white
Display Descriptions Note
COG
* Color tone is slightly changed by temperature and driving voltage.
Page:
LED --
U.R.T.
1.3 Outline dimension
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 5U.R.T.
1.4 Block diagram:
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 6U.R.T.
TFT-LCD320xRGBx240 Dots
262K colors
SSD2119
S960S1
G2
G240
G1
G239
960
LEDB/L
A K
120
VSS
RESB
DO
TCLK
VC
I
120
VD
DIO
18
HSY
NC
VSY
NC
SDO
WSY
NC
2
VSS
DC
/SDC
E/RD
RW/W
RCS/SCS
SCL
SDI
D17~D
0
VSS
OE
VSS
PS0PS1PS2PS3V
SS
NC
NCNC
NC
VSS
PowerGeneration
Circuit
1.5 Interface pin :
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 7U.R.T.
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 8U.R.T.
Table 1.
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 9U.R.T.
2. ELECTRICAL CHARACTERISTICS
2.1 Absolute Maximum Ratings
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 10U.R.T.
2.2 DC Characteristics
2-2.1 Back-light Characteristics
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 11U.R.T.
2.3 Command ( Recommend by U.R.T. )
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 12U.R.T.
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 13U.R.T.
2.5 AC Characteristics
2-4-1 Parallel 6800 Timing Characteristics
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 14U.R.T.
2-4-2 Parallel 8080 Timing Characteristics
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 15U.R.T.
2-4-3 Serial Timing Characteristics
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 16U.R.T.
2-4-4 RGB Timing Characteristics
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 17U.R.T.
2-4-5 Power Up Sequence
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 18U.R.T.
2-5 DISPLAY SETTING SEQUENCE
2-5-1 Display ON Sequence
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 19U.R.T.
2-5-2 Display OFF Sequence
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 20U.R.T.
2-5-3 Sleep Mode Display Sequence
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 21U.R.T.
3. OPTICAL CHARACTERISTICS
3.1 Characteristics
Electrical and Optical CharacteristicsNo. Item symbol / temp. Min. Typ. Max. Unit Note
1 Response Time Tr+Tf - 25 -Θ2+ 60 70 -Θ2- 60 70 -Θ1+ 60 70 -Θ1- 45 60 -
3 Contrast Ratio Cr 300 700Red x-code Rx 0.55 0.60 0.65
Red y-code Ry 0.29 0.34 0.39
Green x-code Gx 0.29 0.34 0.39
Green y-code Gy 0.54 0.59 0.64
4 Blue x-code Bx 0.09 0.14 0.19
Blue y-code By 0.06 0.11 0.16
White x-code Wx 0.27 0.32 0.37
White y-code Wy 0.29 0.34 0.39
Brightness Y 280 400 -
2ViewingAngle Cr>=10
Hor.
Ver.
22Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010
80 - -
Page:
6%
4
-5
ms 2Θ=Ψ=0°
270°90°
0°180°
degree 3
5 Brightness Uniformity
25 ℃
25 ℃
-
cd/m2
25 ℃
U.R.T.
3.2 Definition of optical characteristicsMeasurement condition :
[Note 1] Definition of LCD Driving Vop and Waveform :
[Note 2] Definition of Response Time
[Note 3] Definition of Viewing Angle : [Note 4] Definition of Contrast Ratio :
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 23U.R.T.
[Note 5] Definition of measurement of Color Chromaticity and Brightness
[Note 6] Definition of Brightness Uniformity
[Note 7] Definition of Measurement of Reflectance
Page: 24Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010U.R.T.
480m
m
BM
-7LCD Module
1 2 3
4 5 6
7 8 9
W / 4
Active Area Width : W
Act
ive
Are
a H
eigh
t : H
H /
4
480m
m
BM
-7
LCD Moduleor referance
15 deg.
White Light Source(Ring)
Brightness Uniformity =Minimum Brightness of Point 1~9
Maximum Brightness of Point 1~9
4. RELIABILITY :
High temperature operatingLow temperature operatingHigh temperature storageLow temperature storageHigh temperature & humidity storageThermal Shock -30℃, 30min.<=> 80℃, 30min. storage 10 Cycles
10 => 55 =>10 => 55 => 10 Hz , within 1 minute Amplitude : 1.5mm. 15 minutes for each Direction ( X,Y,Z )
50,000 hoursLife time 25℃ , 60%RH ,
specification condition driving
* One single product test for only one item.* Judgment after test : keep in room temperature for more than 2 hours.
- Current consumption < 2 times of initial value- Contrast > 1/2 initial value- Function : work normally
8 Drop test
4
5
Packed, 100CM free fall, 6 sides, 1 corner, 3edges
Vibration test7
ConditionItem No
60℃, 90%RH, 100 hours
9
1
2
3
Items
70 ℃ , 200 hours
-20 ℃ , 200 hours
80 ℃ , 200 hours
Page: 25
-30 ℃ , 200 hours
6
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010U.R.T.
5. PRODUCT HANDLING AND APPLICATION
□ PRECAUTION FOR HANDLING LCM● The LCD module contains a C-MOS LSI. People who operate the LCM should wear ESD protection eguipement to prevent ESD hurt on products.● Do not input any signal before power is turned on.● Do not take LCM from its packaging bag until it is assembled.● Peel off the LCM protective film slowly since static electricity may be generated.● Pay attention to the humidity of the work shop, 50~60%RH is satisfactory.● Use a non-leak iron for soldering LCM.● Do not touch the display surface or connection terminals area with bare hands.Smudges on the display surface reduce the insulation between terminals.● Cautions for soldering to LCM: Condition for soldering I/O terminals: Temperature at iron tip :350℃±15℃. Soldering time : 3~4sec./ terminals. Type of solder : Eutectic solder(rosin flux filled).
□ PRECAUTION IN USE OF LCD● Do not contact or scratch the front surface and the contact pads of a LCD panel with hard materials such as metal or glass or with one’ s nail.● To clean the surface , wipe it gently with soft cloth dampened by alcohol.● Do not attempt to wiped off the contact pads.● Keep LCD panels away from direct sunlight , also avoid them in high-temperature & high humidity environment for a long period.● Do not drive LCD panels by DC voltage.● Do not expose LCD panels to organic solvent.● Liquid in LCD is hazardous substance. In case a contact with liquid crystal material is occured, be sure to immediately wash such material away by soap and water.● The polarizer is easily damaged and should be handle with special care. Don’ t press or rub it with hard objects.
□ PRECAUTION FOR STORING AND USE OF LCM● To avoid degradation of the device , do not store the module under the conditions of direct sunlight , high temperature or high humidity . Keep the module in bags designed to prevent static electricity charging under low temperature / normal humidity conditions(avoid high temperature / high humidity and low temperature below 0℃)
□ USING ON MEDICAL CARE , SAFETY OR HAZARDOUS APPLICATION OR SYSTEM● For the application in medical care, safety and hazardous prodcuts or systems, an authorization from URT is required. URT will not responsible for any damage or loss which caused by the products without any authorization given by URT.● This product is not allowed to be designed and used for military application and/or purpose.● The delivery of this product to the countries and/or regions where the embargoes
are imposed by U.N. is prohibited.
● Never use the LCD , LCM under 45 Hz , the liquid crystal will decomposition and cause permently damage on display !!
● The application and delivery of this product must comply with Startegic High-Tech Commodities (SHTC) export control and the sales to the embargoed and/or sanctioned countries or regions are strictly prohibited.
Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page: 26U.R.T.
6. DATE CODE OF PRODUCTS
● Date code will be shown on each product :
● YY MM DD - XXXX
Year Month Day - Production lots
● Example: 090508 - 0 0 0 3 ==>Year 2009, May.,08rd , Batch no.03
27Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:U.R.T.
7. PACKING
Packing tray must be stacked with alternated direction to each others.To tacks packing trays in same direction will cause product damaged.
28Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:U.R.T.
29Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:U.R.T.
8. INSPECTION STANDARD
8.1. QUALITY :THE QUALITY OF GOODS SUPPLIED TO PURCHASER SHALL COME UP TO THE FOLLOWING STANDARD.
8.1.1. THE METHOD OF PRESERVING GOODSAFTER DELIVERY OF GOODS FROM U.R.T. TO PURCHASER. PURCHASER SHALL CONTROL THE LCMAT -10 ℃∼ 40℃ ,AND IT MIGHT BE DESIRABLE TO KEEP AT THE NORMAL ROOM TEMPERATUREAND HUMIDITY UNTIL INCOMING INSPECTION OR THROWING INTO PROCESS LINE.
8.1.2. INCOMING INSPECTION(A) THE METHOD OF INSPECTION
IF PURCHASER MAKE AN INCOMING INSPECTION , A SAMPLING PLAN SHALL BE APPLIED ON THE CONDITION THAT QUALITY OF ONE DELIVERY SHALL BE REGARDED AS ONE LOT.
(B) THE STANDARD OF QUALITYISO-2859-1 ( or MIL-STD-105E ) , LEVEL Ⅱ SINGLE PLAN.
CLASS AQL(%)CRITICAL 0.4 %MAJOR 0.65 %MINOR 1.5 %TOTAL 1.5 %
EVERY ITEM SHALL BE INSPECTED ACCORDING TO THE CLASS.(C) MEASURE
IF AS THE RESULT OF ABOVE RECEIVING INSPECTION , A LOT OUT IS DISCOVERED.PURCHASER SHALL BE INFORM SELLER OF IT WITHIN SEVEN DAYS. BUT FIRST SHIPMENTWITHIN FOURTEEN DAYS.
8.1.3. WARRANTY POLICYU.R.T. WILL PROVIDE ONE-YEAR WARRANTY FOR THE PRODUCTS ONLY IF UNDER SPECIFICATION OPERATING CONDITIONS. U.R.T. WILL REPLACE NEW PRODUCTS FOR THESE DEFECT PRODUCTSWHICH UNDER WARRANTY PERIOD AND BELONG TO THE RESPONSIBILITY OF U.R.T.
8.2. CHECKING CONDITION8.2.1. CHECKING DIRECTION SHALL BE IN THE 45 DEGREE AREA TO FACE THE SAMPLE.8.2.2. CHECKER SHALL SEE OVER 30 cm. WITH BARE EYES FAR FROM SAMPLE AND USING 2 PCS.
OF 20W FLUORESCENT LAMP.
30Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:U.R.T.
8.3. INSPECTION PLAN :
CLASS ITEM JUDGEMENT CLASS
1. OUTSIDE AND INSIDE PACKAGE "MODEL NO." , "LOT NO." AND "QUANTITY"
PACKING & SHOULD INDICATE ON THE PACKAGE.
INDICATE 2. MODEL MIXED AND QUANTITY OTHER MODEL MIXED................REJECTED
QUANTITY SHORT OR OVER......REJECTED3. PRODUCT INDICATION "MODEL NO." SHOULD INDICATE ON
THE PRODUCT
4. DIMENSION, ACCORDING TO SPECIFICATION OR
ASSEMBLY LCD GLASS SCRATCH DRAWING.
AND SCRIBE DEFECT.
5. VIEWING AREA POLARIZER EDGE OR LCD'S SEALING LINE
IS VISABLE IN THE VIEWING AREA
……..REJECTED
6. BLEMISH、BLACK SPOT、 ACCORDING TO STANDARD OF VISUAL
WHITE SPOT IN THE LCD INSPECTION ( INSIDE VIEWING AREA )
AND LCD GLASS CRACKS
7. BLEMISH、BLACK SPOT ACCORDING TO STANDARD OF VISUAL
APPEARANCE WHITE SPOT AND SCRATCH INSPECTION ( INSIDE VIEWING AREA )
ON THE POLARIZER
8. BUBBLE IN POLARIZER ACCORDING TO STANDARD OF VISUAL
INSPECTION ( INSIDE VIEWING AREA )
9. LCD'S RAINBOW COLOR STRONG DEVIATION COLOR ( OR NEWTON
RING) OF LCD......REJECTED.
OR ACCORDING TO LIMITED SAMPLE
( IF NEEDED, AND INSIDE VIEWING AREA )
10. ELECTRICAL AND OPTICAL ACCORDING TO SPECIFICATION OR
CHARACTERISTICS DRAWING . ( INSIDE VIEWING AREA )
( CONTRAST、VOP、
CHROMATICITY … ETC )
ELECTRICAL 11.MISSING LINE MISSING DOT、LINE、CHARACTER
....REJECTED
12.SHORT CIRCUIT、 NON DISPLAY、WRONG PATTERN
WRONG PATTERN DISPLAY DISPLAY、CURRENT CONSUMPTION
OUT OF SPECIFICATION...... REJECTED
13. PIN HOLE、PATTERN DEFORMITY ACCORDING TO STANDARD OF VISUAL
INSPECTION
31Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:
Minor
Critical
Major
Major
Minor
Minor
Minor
Minor
Minor
Minor
Critical
Critical
Critical
U.R.T.
8.4. STANDARD OF VISUAL INSPECTIONNO. CLASS ITEM JUDGEMENT
(A) ROUND TYPE: unit : mm. DIAMETER (mm.) ACCEPTABLE Q'TY
.BLEMISH、BLACK SPOT、 Φ ≦ 0.18.4.1 WHITE SPOT IN THE LCD. 0.1 < Φ ≦ 0.2
0.2 < Φ ≦ 0.25 0.25 < Φ
.BLEMISH、BLACK SPOT、 NOTE:Φ=(LENGTH+WIDTH)/2
WHITE SPOT AND SCRATCH (B) LINER TYPE: unit : mm. ON THE POLARIZER LENGTH ACCEPTABLE Q'TY
------ W ≦0.03L≦ 5.0 0.03 < W ≦0.05L≦ 5.0 0.05 < W ≦0.07------ 0.07 < W FOLLOW ROUND TYPE
unit : mm.DIAMETER
8.4.2 BUBBLE IN POLARIZER Φ ≦0.15 0.15 < Φ ≦ 0.5 0.5 < Φ
8.4.3 Dot Defect Bright dotDark dot
Pixel Define
Not 1: The definition of dot: The size of a defective dot over1/2 of whole dot is regarded as one defective dot.
Not 2: Bright dot: Dots appear bright and unchanged in size in which LCD panel is displaying under black pattern.
Not 3: Dark dot: Dots appear dark and unchanged in size in which LCD panel is displaying under pure red, green ,blue pattern.
32Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:
MINOR
MINOR
31
DISREGARDWIDTH
ACCEPTABLE Q'TYDISREGARD
2
DISREGARD210
0
N≦ 4
Items ACC. Q'TYMINOR N≦ 4
U.R.T.
NO. CLASS ITEM JUDGEMENT
8.4.4 CHIPPING Y > S REJ.
8.4.5 CHIPPING X or Y > SREJ.
8.4.6 GLASS CRACK Y > (1/2) TREJ.
1. a> L/3 , A>1.5mm.8.4.7 SCRIBE DEFECT REJ.
2. B : ACCORDING TO DIMENSION
8.4.8 CHIPPING Φ= (x+y)/2 > 2.5 mm
( ON THE TERMINAL AREA ) REJ.
8.4.9 CHIPPING Y > (1/3) T ( ON THE TERMINAL SURFACE ) REJ.
8.4.10 CHIPPING Y > T REJ.
MINOR
MINOR
MINOR
MINOR
MINOR
MAJOR
MAJOR
33Revision 3 ; UMSH-8252MD-T Ver. 3 ; March-05-2010 Page:U.R.T.
AvnET EmBEddEd officES.
LocAL AvnET EmBEddEd BuSinESSES:
07/2010
www.avnet-embedded.eu
All trademarks and logos are the property of their respective owners. This document provides a brief overview only and is not intended to be complete or binding offer. Product information, including information related to a product‘s specifications, uses or conformance with legal or other requirements, is obtained by Avnet from its suppliers or other sources deemed reliable and is provided by Avnet on an „As Is“ basis. Avnet makes no representation as to the accuracy or completeness of the product information and Avnet disclaims all representations, warranties and liabilities under any theory with respect to the product information, including any implied warranties of merchantability, fitness for a particular purpose, title and/or non-refringement. All product information is subject to change without notice.
dEnmArkAvnet EmbeddedAvnet Nortec A/SEllekær 92730 HerlevPhone: +45 3678 6250Fax: +45 3678 [email protected]
finLAndAvnet EmbeddedAvnet Nortec OyTiilenpolttajankuja 3 A B1720 VantaaPhone: +358 207 499260Fax: +358 942 [email protected]
frAncEAvnet EmbeddedAvnet EMG France SAImmeuble 154, Parc Chene 25, allée du General Benoist69000 BronPhone: +33 4 72 81 02 30Fax: +33 4 72 81 02 [email protected]
Avnet EmbeddedAvnet EMG France SA6-8, rue Ambroise CroizatZAE Les Glaises91127 Palaiseau Cedex Phone: +33 1 64 47 29 29 Fax: +33 1 64 47 99 99 [email protected]
Avnet EmbeddedAvnet EMG France SAZA la Hallerais le Semiramis2, allée du Communel35770 Vern sur SeichePhone: +33 2 99 77 37 02Fax: +33 2 99 77 33 [email protected]
GErmAnY (AuSTriA, cZEcH rEpuBLic, HunGArY, poLAnd, SWiTZErLAnd)Avnet EmbeddedAvnet EMG GmbHGruber Straße 60c85586 PoingPhone: +49 8121 775 500 Fax: +49 8121 775 [email protected]
Avnet EmbeddedAvnet EMG GmbHLötscher Weg 6641334 NettetalPhone: +49 8121 775 500Fax: +49 8121 775 [email protected]
iTALY (porTuGAL, SpAin)Avnet EmbeddedAvnet EMG Italy SRLVia Manzoni, 4420095 Cusano MilaninoPhone: +39 02 66092 1Fax: +39 02 66092 [email protected]
nETHErLAndS (BELGium, LuXEmBourG)Avnet EmbeddedAvnet B.V.Takkebijsters 24802 BL BredaPhone: +31 76 5722400Fax: +31 76 [email protected]
SWEdEn (norWAY)Avnet EmbeddedAvnet Nortec ABEsplanaden 3 D172 67 SundbybergPhone: +46 8 564 725 50Fax: +46 8 760 01 [email protected]
uniTEd kinGdom (irELAnd)Avnet EmbeddedAvnet EMG Ltd.Pilgrims Court, 15/17 West StreetReigate, Surrey, RH2 9BLPhone: +44 1737 227800Fax: +44 1737 [email protected]