autumn edition - march-may 2015 promo - nz march 2015_12pp… · fully enclosed (and lockable) with...
TRANSCRIPT
AUTU
MN
EDI
TION
- M
ARCH
-MAY
201
5
MASSIVEStock ClearanceSpecials Inside
Until 31st May
or while stocks last!
2
Until 31st MayCLEARANCE
HANDMATIC
• Ø 20 – 150 mm. Drive unit with maintenance-free belt drive, capacitor motor
• 230 V, 50 Hz, 750 W, right and left-hand rotation, guide hose• Personal protection switch (PRCD) • Choice of cable and tool set 16 or/and 22• 5 cable sections 22 × 4.5 m in cable carrier• Straight auger 22 • Retrieving auger 22• Funnel auger 22• Toothed cross-blade borer 22/35 • Cable joint separator 22/32• 1 pair of guide gloves• Steel case for tool set 172011
The HandMatic is an electric spring machine, which is suitable for the cleaning of drains up to 75 mm. The HandMatic can be delivered inclusive of drill or as separte unit which is suitable for any type of drill (with forward and reverse facility) The spring is capable of cleaning drains to their full length, including bends and siphon traps. The automatic spring feed unit, will feed the spring into and out of the drum. The springs have coiled bulbous heads. The 10 mm springs has the unique Rioned square coupling system, allowing all different kinds of tools to be used, depending on the type of blockage. The spring drum is closed, preventing walls and floors from becoming dirty during unblocking.
GST and Freight Exclusive WHILE STOCKS LAST
ART NO: RM172011
ELECTRIC PIPE & DRAIN CLEANINGMACHINE FOR PIPESREMS COBRA 22 SET
$ 799.00
HANDMATIC
$1995.00Normally $3877.05
Diameter 75mm Diameter spring 6-8-10 mm Diameter drain/sewer 12-75mm Weight incl. spring 6kg Motor 230 Volt/0.63kW Maximum Dba 84
NOW
3
RioScope Flexible MINI Camera System
• Flexible mini camera system• Easy to operate• For drains and sewers ø 16 to 100mm• Integrated meter counter and mini sender• Hose Reel with 20m glass fibre cable inclusive 17mm camera
head• Extra flex cable 1.8m with 9mm camera head• Optional battery head
Standard Specifications:• The standard set consists of RioScope handheld unit with 3.5
inch (85mm) TFT colour screen.• Hose reel with 20m x 5mm glass fibre push cable, supplied with
17mm colour camera head, including rechargeable batteries, light regulation, 640Hz mini sender, distance counter and video-out with BNC connection
• Standard Accesories: 240V and 12V supply cable, professional transport bags for hose reel and tools.
For Drains and Sewers ø 16 to 100mm.
RIONED Electric Spring Machine
GST and Freight Exclusive WHILE STOCKS LAST
TYPE DART.-NO RN10.051.002.000
TYPE D
SUPER
The spring of the type D is enclosed in a drum, preventing floors and walls from becoming dirty during the process of unblocking. The handle lock allows the spring to be turned to the left of to the right.
The Super is the strengthened version of the Type D. Different lengths and diameters of springs can be mounted in the drum of the Super.
Diameter 75mm Diameter spring 6-7mmDiameter drain/sewer 20-50mm Weight incl. spring 4kgMotor manual Maximum Dba No
Diameter 75mm Diameter spring 6-7mmDiameter drain/sewer 20-50mm Weight incl. spring 4kgMotor manual Maximum Dba No
$69.95WAS $92.46
$199.00WAS $250.00
$4590.00WAS $5500.00
ART.-NO RN10.051.002.000
ART.-NO RN10.052.001.000KIT
ART.-NO RN16.047.009.017
Comes Standard with 8mm x 7.5mtr Spring Cable with Bulbous Head
Comes Standard with 7mm x 5mtr Spring Cable
SUPERART.-NO RN10.052.001.000KIT
MASSIVE
Savings!
STOCK
Clearance!
RIOSCOPE FLEXIBLE MINI CAMERA SYSTEM
Extra Flex Cable with 9mm Camera Head
The 640Hz Mini sender, situated behind the camera head of the hose reel. It can be detected with the Rioned RioTrack Pro detector - an option
4 GST and Freight Exclusive WHILE STOCKS LAST
REMS REG 10-54 E HEAVY DUTY DEBURRERSturdy manual or electric drive tool for outer-inner tube deburring.Easy, effortless deburring through multiple blades which are specially hardened and ground.
REMS REG Heavy Duty Deburrers
ART.-NO RM113835 10-54mm $130.00Sturdy manual tool for outer-inner tube deburring. Fast, effortless deburring through 3 specially hardened and ground deburring blades. Copper, brass, aluminium, steel and plastic tubes.
REMS REG 3-35MM DEBURRER
ART.-NO RM113900 (3-35mm Deburrer) $17.50Normally $28.00
Sturdy manual tool for outer-inner tube deburring. Easy, effortless deburring through multiple blades which are specially hardened and ground.
REMS REG 8-35MM/0-54MM HEAVY DUTY DEBURRERS
ART.-NO RM113825 (8-35mm) $79.95Normally $141.16
ART.-NO RM113830 (10-54mm) $110.00Normally $180.00
Universal quality tool for deburring tubes and edges of different materials. Copper, steel, brass, aluminium, plastic. Fast simple blade replacement by pulling back the front sliding sleeve.
REMS REG UNIVERSAL
ART.-NO RM113910 $24.95Normally $37.10
ART.-NO RM11383510-54mm E DEBURRER
ART.-NO RM1139103-35mm DEBURRER
ART.-NO RM11383010-54mm DEBURRER
ART.-NO RM1138258-35mm E DEBURRER
ART.-NO RM113830REG UNIVERSAL
Robust, solid design for heavy-duty application. Sturdy spindle, long spindle guidance and hardened back pressure rollers provide exact alignment to the tube, easy in-feed, easy cutting and precise, right angle cut. Reamer in handle.
Small handy, specially for use in restricted spaces. Large operating knob in metal for easy in-feed and cutting. Broad, precise cutter wheel bearing on a hardened, non rotating wheelshaft guarantees a right angle cut. Reamer in handle.
REMS Cu-INOX 3-28mm Cutter
REMS Cu-INOX 3-16mm/3-28mm Mini Cutters
ART.-NO RM113300 $27.95Value $40.14
ART.-NO RM113200 (3-16mm) $24.95Value $34.11
ART.-NO RM113240 (3-28mm) $37.95Normally $49.36
3-28MM CUTTER
3-16MM MINI CUTTER
3-28MM MINI CUTTER
SPECIALSAMAZING
5
REMS PUSH
KS PRESSURE TEST PUMP
REMS E-PUSH 2
Powerful, electric pressure testing pump for pressure and tightness tests of piping systems and receptacles. Universal use.In sanitary, heating, solar and sprinkler installation, for compressed air, steam and cooling systems, oil installations, in boiler and pressurised vessel construction.
p ≤ 6MPa/60 bar / 870 psi
ART.-NO RM115500
REMS E-Push 2
$995.00Introductory Price
KS PRESSURE TEST PUMP
REMS ROS Pipecutters
Proven, reliable testing pump for pressure and tightness testsof piping systems and receptacles.For plumbing, heating, solar system and sprinkler installations,forcompressed air, steam and cooling systems, oil installations, for boiler and pressure vessel building.
p ≤ 16 bar/1.6MPa/ 232psi - 60bar/6MPa/890 psiCorrosion resistant powder coated 12ltr tank.
ART.-NO RM115000
ART.-NO KS50V2A
42mm CuttersART.-NO RM291000
REMS Push
Proven, reliable testing pump for pressure and tightness testsof piping systems and receptacles.For plumbing, heating, solar system and sprinkler installations, forcompressed air, steam and cooling systems, oil installations, for boiler and pressure vessel building.
p ≤ 16 bar/1.6MPa/232psi - 60bar/6MPa/890 psiStainless steel 12ltr tankTwin Valve pressure system.
Fast removal of blockages. High down force thanks to front adjustable grip handle. 2 adaptor sleeves for optimum adaptation to the problem area: Short sleeve for sinks, basins and baths, long sleeve for toilets.
$310.00
$450.00
$81.95
Normally $360.00
Normally $525.00
Normally $110.00
63mm CuttersART.-NO RM291270 $186.95
Normally $302.00
PRODUCT
SUPER
SpecialREMS ROS 42mm CUTTERS
REMS ROS 63mm CUTTERS
GST and Freight Exclusive WHILE STOCKS LAST
6
SAVINGS
REMS Eva -the professionals die stock. Excellent start-cutting and threading. Steel ratchet lever, thickly plastic coated.Only one type of quick-change die heads. Indestructible quality dies.Available in 1¼” and 2” BSPT sets
Powerful, easy to operate industrial electric tool for threading with unique support bracket. Ready for use anywhere, without vice. Ideal for repair, renovation, job site.• ½-2” BSPT Set• Powerful 1700W universal motor• Indestructible REMS quality dies.
GERMAN QUALITY
REMS Eva
SET 1
SET 2
REMS Amigo 2½ - 2” BSPT
½-1 1¼” BSPT SetART.-NO RM520015PROMO $499.00
Normally $705.00
½-2” BSPT SETART.-NO RM520017PROMO $795.00
Normally $1119.35
ART.-NO RM540020PROMO $2195.00Normally $2809.47
Massive
REMS EVA
GERMAN QUALITY
With every REMS Eva threader set
get a REMS Spezial 600ml thread cutting oil FREE
Normally $25.95 ea
With every REMS Amigo threader set
get a REMS Spezial 600ml thread cutting oil FREENormally $25.95 eachand a FREE REMS vest
REMS AMIGO
GST and Freight Exclusive WHILE STOCKS LAST
7
AUTOMATIC CHUCK
REMS TORNADO 2” MACHINE GERMAN QUALITY PRODUCT
REMS MAGNUM 2” MACHINESTAND OPTIONAL EXTRA
REMS MAGNUM 4”OPTIONAL OIL TRAY SHOWN
Robust , compact high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metal working, industry. For job site and workshop• Pole reversible capacitor motor, 2100W. (extremely quiet running, maintenance free)• Overload protection. 2 spindle speeds (no speed reduction under load)• Universal automatic die head for all sizes (½-2”, 2 ½-4”)• extremely powerful and fast e.g. Thread 2” in only 15 s.
REMS Magnum
REMS Magnum 2” machine
ART.-NO RM340227PROMO $5760.00
REMS Magnum 4” machine
ART.-NO RM380445PROMO $8995.00
Proven high performance machine for threading, cutting, deburring, threading of nipples, roll grooving. For installation, metalworking, industry. For job site and workshop.• Pole reversible capacitor motor, 2100W. (maintenance free)• Overload protection. 2 spindle speeds (no speed reduction under load)• extremely powerful and fast e.g. Thread 2” in only 15 s.AUTOMATIC CHUCK 2 automatic chucks with self-centering clamping jaws for easy and fast clamping and release of the material. Self tightening, hence maximum clamping force.No slipping of pipes.
REMS Tornado
ART.-NO RM340201PROMO $4995.00REMS Tornado 2” Machine
Upgrade to the large steel workshop oil tray and stand for only:
ART.-NO RM340201PROMO2 $6195.00
Wheels Optional Extra
With every REMS Tornado or Magnum
threading machine get a REMS Spezial 5 ltr thread
cutting oil FREENormally $78.85 ea
With every REMS Magnum threading
machine get a FREE upgrade to
REMS wheel standNormally $670.00
For an extra $800.00 investment upgrade your new Magnum with a large capacity steel workshop oil tray.
GST and Freight Exclusive WHILE STOCKS LAST
8
Until 31st MayPROMOTION
758 Sewer Jetters
Spartan Tool is the originator of the hydraulic root cutter, an unsurpassed tool for attacking heavily root-impacted sewer lines. These heat-treated saw blades are tough over the long haul, and the hydraulic motors that power them are designed to be operated at specific pressures and flows for hydro-jetters and sewer flushers. Unlike nozzles that try to pulverize roots, these cutters will cut, tear, and yank on the roots to completely clear the line in short order.
Root Cutters
Warrior Hydro Jetters
Triplex ceramic plunger pump delivers 4,000 PSI @ 18 GPM
180° pivoting hose reel and controls, with variable speed hydraulic rewind
Optional six function wireless remote available for easy one-man operation
Electrically controlled pump pulsation for maximum cleaning distance
Fully enclosed (and lockable) with soundproofing throughout for the quietest 4,000 PSI trailer jetter in the world - within all OSHA noise stan-dards
Tier IV diesel engine meets all US emission standards through 2012
Dial-A-Pressure engine setting
Lockable noise-reducing engine shroud
Wash-down gun in lockable holster
300-gallon water tank with integrated baffles allows unit to be towed while full of water
Torsion single-axle suspension with electric brakes
Full system winterization with antifreeze recirculation
Magnetic working light allows you to place the light where you need it
Top-mounted amber strobe light for operator safety
Pump engagement clutch enables engine to warm up without pump engaged
Shut-down protection for low water, low engine oil and high engine tem-perature
Hose rewind guide
Manhole hose protection
Locking toolbox
Marine-grade gauges and battery enclosure
Triplex ceramic plunger pump delivers 3,000 PSI @ 12 GPM
Electrically controlled pump pulsation for maximum cleaning distance
Power hose rewind
150-gallon low-profile water tank
Trailer fully certified by the National Association of Trailer Manufacturers
Electric start engine
Rear-mounted operator controls
Manhole hose protection
Wide-track chassis
13" tires with custom spoke wheels
Shut-down protection for low water, low engine oil and high enginetemperature
Hinged protective lockable shrouding around engine
Air purge system protects against cold weather conditions
Folding jack stand with wheel
Wash-down gun and lance
Hose rewind guide
Locking toolbox
Contact us for more information on the range of Professional Sewer and Drain Cleaning Equipment
WARRIOR HYDRO JETTERS
ROOT CUTTERS
• Triplex ceramic plunger pump delivers 3,000 PSI @ 12 GPM• Electrically controlled pump pulsation for maximum cleaning distance• Trailer fully certified by the National Association of Trailer Manufacturers• Shut-down protection for low water, low engine oil and high engine temperature• Hinged protective lockable shrouding around engine• Air purge system protects against cold weather conditions• Power hose rewind • 150-gallon low-profile water tank• Electric start engine • Rear-mounted operator controls• Manhole hose protection • Wide-track chassis• 13” tires with custom spoke wheels • Folding jack stand with wheel• Wash-down gun and lance • Hose rewind guide• Locking toolbox
• Triplex ceramic plunger pump delivers 4,000 PSI @ 18 GPM• 180° pivoting hose reel and controls, with variable speed hydraulic rewind• Optional six function wireless remote available for easy one-man operation• Electrically controlled pump pulsation for maximum cleaning distance• Fully enclosed (and lockable) with soundproofing throughout for the quietest
4,000 PSI trailer jetter in the world - within all OSHA noise stan-dards• Tier IV diesel engine meets all US emission standards through 2012• Dial-A-Pressure engine setting• Lockable noise-reducing engine shroud• Wash-down gun in lockable holster• 300-gallon water tank with integrated baffles allows unit to be towed while
full of water• Torsion single-axle suspension with electric brakes• Full system winterisation with antifreeze recirculation• Magnetic working light• Top-mounted amber strobe light for operator safety• Pump engagement clutch enables engine to warm up without pump engaged• Shut-down protection for low water, low engine oil & high engine temperature• Hose rewind guide• Manhole hose protection• Marine-grade gauges and battery enclosure
758 SEWER JETTERTRAILER & SKID MOUNT
ROOT CUTTERS
Contact us for MORE INFORMATION on the range of Professional Sewer and Drain Cleaning Equipment.
PROFESSIONAL SEWER AND DRAIN CLEANING EQUIPMENT758 SEWER JETTERS
Spartan Tool is the originator of the hydraulic root cutter, an unsurpassed tool for attacking heavily root-impacted sewer lines. These heat-treated saw blades are tough over the long haul, and the hydraulic motors that power them are designed to be operated at specific pressures and flows for hydro-jetters and sewer flushers. Unlike nozzles that try to pulverize roots, these cutters will cut, tear, and yank on the roots to completely clear the line in short order.
$ POA
$ POA
$ POA
WARRIOR HYDRO JETTER
SPARTAN’S PREMIER TRAILER JET GIVES YOU 4,000 PSI @ 18 GPM
GST and Freight Exclusive WHILE STOCKS LAST
9
MODEL 727 Petrol Engine Jetter
• Fully functional fourth generation iPad with retina display• Touchscreen control of all features• Telestrator technology allows you to highlight any problem with the touch of
a finger• Built-in transport cart with extending handle and high-clearance wheels• On-screen, full QWERTY keyboard• Sapphire glass lens reduces scratching• Water proof, self-leveling camera head• Built-in microphone allows easy jobsite narration• Up to six hours of battery life on a single charge• Freeze-frame snapshot capability at any time• Add text at any time to any video or snapshot• Changeable font sizes, colors and locations• Easily removable iPad communicates via wireless Blue Tooth connection,
allowing you to move any-where• Heavy-duty rotationally molded case protects unit in harshest conditions• On-screen, repositionable footage counter• Full iPad capabilities allow you to email
a recorded file at any time• Camera centering guide included• 512 Hz locating beacon• 240 volt or battery operation• Camera light intensity rheostat• Lithium Ion battery technology
• Triplex ceramic plunger pump has adjustable pressure regulator for up to 4 GPM @ 3,000 PSI
• Patented pulse technology reduces friction, continuously moves hose down the line and improves hose retrieval
• Electric start motor with manual backup and direct drive• Detachable dual action hose reel tilts forward for use in cleanouts below the
cart and removes• Thermal dump feature controls heat build up during continuous operation• Air evacuation port standard for easy winterisation in below-freezing
temperatures• Swivel-locking front casters for stability• Seven nozzles and nozzle cleaning tool• Wash-down gun with adjustable spray nozzle• Low engine oil shut-down • Easy-ride 10” pneumatic tires• Gauntlet-style jetting gloves • Optional loading assist wheel
Contact us for MORE INFORMATION on the range of Professional Sewer and Drain Cleaning Equipment.
With all the power and speed of larger water jets, this machine is ideal for heavy-duty jobs: grease, lime, sand and sediment.
SPARVISION 200 Sewer Camera
$12,995.00
$5995.00
SPARVISION 200
727 PETROL ENGINE JETTER
Our handy locator allows you to locate in virtually any pipe material as well as tracing existing lines from other services.
This package
includes the new
Spartan Accuview
Locator Kit!
Get a FREE Spartan Cap and t-shirt
with any Spartan Tool purchase
that’s on promo!
GST and Freight Exclusive WHILE STOCKS LAST
10
Until 31st MayPROMOTION
GH2T GANTRY SERIES• The lightweight, portable, easily assembled, all-aluminum
GH2T Gantry Lift has been upgraded. It has a lift capacity of up to 2 metric tons and is available in three metric sizes (3, 4, and 5 meters). Upgrades to the GH2T gantry include A-frame legs that lock in opened or closed position, utilizing a push-button release and casters with foot brake that lock at 90-degree angles. The new design of the A-frame assembly eliminates the need for a locking crossbar to hold legs in the open position.
• The lift consists of two A-frames, a crossbeam, and attaching hardware. An adjustable lifting handle allows height adjustments to be made in 6-inch (15 cm) increments. Each A-frame has two 8-inch (200 mm) lockable casters. Crossbeams come in seven sizes and have nylon carrying handles at both ends. The GH2T gantry assembly is specifically designed to be erected by a two-man crew. $ 5600.00
GST and Freight Exclusive WHILE STOCKS LAST
2 TON PORTABLE Aluminium Gantry*
PRODUCT
Innovative A-Frame ConstructionStandard Features:• Available in 3 m, 4 m & 5 m sizes• 2 Metric Ton (4,400 lb)• Lightweight & Portable• Quick Two-Person Assembly• Adjustable Span• Minimum Pieces – 2 A-Frames with casters, Trolley, Cross Beam and attaching hardware• Aluminum Frames & Beam• 8” (200 mm) Locking Casters or 10” (250 mm)• Unassisted Height Adjustment• Pinch Point Free
INNOVATIVE MAST HEIGHT ADJUSTMENT
Adjust mast lifting handle with plunger pin to comfortable lifting position.
Lift mast and remove quick-action mast locking pin - NO BOLTS!
When lifting handle is next to frame, mast holes are aligned for locking pin.
Adjust height in 6” (15cm) increments
Gantry with 3 metre Beam
11
Hardness and torque meets or exceeds ANSI SPECS B107.8M, Chrome Vanadium, Drop Forged Super Slim Jaw, Extra Wide Jaw Capacity.
Make changing mixers easy, all in one set. Ideal for getting into hard to reach nuts on mixer taps. 8 deep sockets, 2 extension bars, universal joint, ratchet. Assorted extensions and ratchet.
Contains½, ¾, 1” ID Expander heads. Handy Inner/Outer Deburrer, ABS case. For single-handed operation.
Ideal for recessed and extended. Tap spindles.ContainsHex 20 x 21mm, Hex 22 x 23mm, Hex 29 x 24mm, Square Hex 25mm x 28mm, Turning bar 230mm.
WIDE JAW Adjustable Wrench
ANCRA Mixer Tap Socket Set
NZ Plumbers ID Expander Set
TUBE Spanner Kit
6”/150mm 0-34mm capacityART.-NO APTAS150 $27.95
$75.00
Normally $35.00
Normally $85.95
c/w Diamond blade, Saw blade, and abrasive bladeFor cutting PVC pipe and other thin walled plastic pipe, fits 3/8” drill.
INTERNAL Pipe Cutter
ART.-NO CUTTERINTERNALDB $25.95Normally $35.00
$68.35
8”/200MM 0-38MM CAPACITYART.-NO APTAS200 $31.95
Normally $39.95
8”/200MM 0-38MM CAPACITYART.-NO APTAS250 $36.95
Normally $45.95
ART.-NO IDSET $335.00Normally $350.00
ART.-NO APTBOXSPANNER
PLUMBERS WIDE JAW ADJUSTABLE WRENCH
INTERNALPIPE CUTTER
ANCRA MIXER TAP SOCKET SET
NZ PLUMBERSID EXPANDER SET
TUBE SPANNER KIT
GST and Freight Exclusive WHILE STOCKS LAST
Subj
ect t
o al
tera
tions
and
erro
rs. ©
Cop
yrig
ht 2
014
by A
NC
RA N
Z LI
MIT
ED.
Prom
otio
n un
til 3
1st M
AY 2
015.
Opt
iona
l ext
ras.
Cal
l for
pric
ing
on 0
508
426
272.SALES THROUGH SPECIALIST DEALERS
New Zealand Agent: Ancra New Zealand LtdTel: 0508 426 272 Email: [email protected]
DISTRIBUTED BY:
12 Month Warranty
Buy a 5 pack of 2.5 ton X 9m Ancra Industrial Load Binders to receive an ANCRA COOLER BAG with two 25mm Binders.
Perfect for farm use and 4WD vehicles, kit includes 5mtrs of G70 transport chain, lug link, grab hook and slip hook. Great for moving anything on the farm, posts, vehicles, machinery etc and Is an essential tool when 4WD!
Ratcheting Cargo Bar - Adjusts from 1020mm—1770mm Fits all standard Pick up trucks and SUV’s.Prevents cargo from sliding and tipping over
2.5 Ton x 9m - 5 PACK PROMO
10mm UNI DRAG KIT
RATCHETING CARGO BAR
$110.00
$64.00
$29.95
Normally $80.00
Normally $39.95
RATCHETING CARGO BAR
GET INTO
AN ANCRA
COOLER BAG &
2 X 25mm X 5m
HOOK & KEEPER
INDUSTRIAL BINDERS
FREE WITH
EVERY 5 PACK
PROMO
GST and Freight Exclusive WHILE STOCKS LAST
5 PACK PROMO
ART NO. 40877
50000-12-5PACKPROMO3
ART NO. SL125