auto cad lab manual for training
DESCRIPTION
it consists of a series of experiments for learning auto cad basis up to extrusion of its 3D MODELTRANSCRIPT
AutoCAD
List of experiments to be performed:
1. Introduction to AutoCAD (Introduction to the basic commands used in AutoCAD)
2. Creation of simple objects using simple commands
3. To create special curves like parabola, spiral etc usingCubicspline, bspline.
4. To make Orthographic view of solids(Making 2D sketches of various figures using common commands)
5. To make Orthographic view of solids
6.To make orthographic view of the given figure
7. To make orthographic view of the given sketch
8. To make the orthographic projection of the given figure
9. To make an isometric view of dimensioned drawing using isometric grid and snap
10. To make an isometric view of dimensioned drawing
11. To make an isometric view of the given sketch
12. To make an isometric view of the given sketch.
13. To draw the isometric view of the given sketch.
14. To make the isometric view of the given sketch
15. To make the isometric dimensioned drawing of the given switch base
16.To draw the ISOMETRIC VIEW OF THE BRACKET GIVEN BELOW.
17. To draw the nut and bolts of square thread with external threading
18. To draw the nut and bolt of acme thread with internal threading
19. To draw the nut and bolt of acme thread with external threading
20. Drawing the 3D model of a simple object by extruding from its 2D model
21. To make a figure of spur gear
22. To extrude a 3D figure of SPUR gear
23. To extrude a 3D figure of straight bevel gear.
24. To make a 3D MODEL OF THE GIVEN FIGURES
25. To make a 3D model of nut and bolt
26. To extrude a 3D model of the rim of the car
27. To extrude a 3D model of cotter joint
28. To extrude a 3D model of helical spring
29. To extrude a 3D model of spur gear
30. To extrude the 3D model of nut and bolts with square thread
31. To extrude the 3D model of nut and bolts with square thread
32. The use of object snap and other precision tools to make our drawing more precise.
33. To organize the drawing with different layers and states and also changing the objects layer
34. To insert blocks from tool palettes from the design centre of AutoCAD
35. Working with hatching, dimensioning and accurate positioning in AutoCAD