Material Sizes Au.diStyle is available in the following range of standard sizes. For non-standard sizes contact Atkar .

Product Description Au.diStyle solid decorative panels deliver a striking result for flat or curved surfaces in quality interiors. Au.diStyle is available in a myriad of finish options and can be conceal fixed to walls or ceilings. Panels can be customised as necessary.

Product Features– Available in up to 3600 x 1200mm panels -

dependent on finish type– Custom panels available– Panel

thickness from 2.5mm 25mmto

– Available in curvable panels for radii as small

as 50mm– Concealed fixing – seamlessly edged be can Panels

options

– Double sided panels available

Variations– Choice of standard edge profile options– Matching or contrasting edge finishes– MDF, plywood or OSB substrates

Jointing Options– Expressed Joint

- can be matched or contrasted

to the panel finish. (Refer to installation XJ1

system

XJ1)

– Butt Joint are profiles edge moulded-

recommended where butt jointing is selected to compensate for any

minor variations in the structure or panel alignment. Consideration should also be given to expansion

factors. (Refer to installation system - BJ2)

Edge Profile Options The following standard edge profiles are available, with matching or contrasting decorative finishes. Custom profiles are available - consult Atkar (minimum quantity provisions apply).

All profiles shown on a 12mm thick panel.

AE 07

AE 90

AE 95

AE 55

AE 61

AE 90

AH 10

AE 07

AE 07Au.diStyle data sheet

© Copyright 8201 GroupAtkar

TM

WA/SAPOT 5662 6323 08

6919 DC Joondalup 710 Box Region Head

17–19 Office

David Lee Road Hallam Victoria 3803 AustraliaPO Box 1143 Narre Warren MDC 3805 T 03 9796 3333

atkar.com.au

Applications–

––

components Joinery – doors panel flush Interior

panels Curved

soffits andBulkheads –

linings ceiling and Wall

SubstratesMDF

FinishesInluxeInluxeInluxeInluxeInluxe

Vinyl Colour

Laminate Image Veneer

MDFMDFMDFMDFPlywoodPlywoodPlywoodOSB

Goldcore irchB

ineP oopH rated fire Blackcore

Blackcore esistantr oisturem

atedr iref tandards

FireFor

Atkar. contact please ratings fire Number Group

Rating

WarrantyAu.diStyle

terms. for document Warranty to Refer years. (15) fifteen for warranted is

––––

FixingAu.diMountAu.diMountAu.diMountFace

fix )(walls fix concealed XJ1 (walls) fix concealed BJ2

(ceilings) fix concealed CX4 Systems

––––––––– –––––

Access

Accesseasily

shouldthe Standard

request. on available sizes Custom 600mm. x 600 450mm, x 450 sizes:

panel access planks. of installation duringsite on- out carried be processes

These Au.diStyle. into integrated be penetrations other canand panels

Panels

Document 3 Version

Panel

Panel

Panel

Au.diStyle Au.diStyle Au.diStyle

Wall frame Batten or StudWall frame

Edge profile/finish as selectedExposed fasten

Max. joint width

5

Au.diStyle Au.diStyle Au.diStyle Au.diStyleAu.diStyle

Wall frame Batten or Stud Batten or Stud Batten or StudWall frame

Edge profile/finish as selectedEdge profile/finish as selectedExposed fasteners as selected

Exposed fasteners as selectedBevel panel edges

Edge profile/finish as selectedMax. joint width

5

Installation Details Au.diStyle panels are best mounted with the Au.diMount concealed fixing system. Details of these systems are included in

sheet data Au.diMount

. The following table provides a fixing guide

for Exposed Fixings. Consideration should be given to reduced framing

centres for higher impact areas such as corridors and crowded spaces, or where surfaces are to be curved. Au.diStyle wall panels should be installed with a full perimeter support to minimise the risk of buckling. Allowance should be made between panels to accommodate swelling and building movement.

Expressed Joint – Plan view Au.diMount Concealed Fixing System (Refer to Installation System - XJ1)

Au.diStyle Au.diStyle Au.diStyle Au.diStyleAu.diStyle

Wall frame Batten or Stud Batten or Stud Batten or StudWall frame

Edge profile/finish as selectedEdge profile/finish as selectedExposed fasteners as selected

Exposed fasteners as selectedBevel panel edges

Edge profile/finish as selectedMax. joint width

5

Au.diStyle Au.diStyle Au.diStyleAu.diStyle

Wall frame Batten or Stud Batten or StudWall frame

Edge profile/finish as selectedEdge profile/finish as selectedExposed fasteners as selected

Exposed fasteners as selectedBevel panel edges

Max. joint width

5

Au.diStyle Au.diStyle Au.diStyle

Wall frame Batten or Stud Batten or Stud

Edge profile/finish as selectedExposed fasteners as selected

Exposed fasteners as selectedBevel panel edges

Edge profile/finish as selected

Material Thickness (mm)

Fastener Centres Intermediate (mm)

Fastener Centres Perimeter (mm)

Maximum Framing Centres (mm)

9.0

12.0 - 18.0

450

600

200

200

300

300

Walls and Ceilings

Other*

Exposed Fasteners

Concealed Fixings Expressed Joint Typical detail refer to Au.diMount XJ1 System

sheet data

for full details

Jointing Details

Exposed Fixings Expressed Joint

Butt Joint System Typical detail refer to Au.diMount BJ2 System sheet data for full

details

AMCC061screwed to wall frame

AMCO61screwed to rear of panel

Panel

General fixing guide only, for interior applications, consult Atkar Technical Staff for full details.

* For other thicknesses consult Atkar Technical Staff.

4

3

2

5

1

Au.diStyle installation guide

© Copyright 8201Group Atkar

Document 3 Version