audi fiscube englisch - ima-boxima-box.de/support/manuals/fiscube_audi_en.pdf · operating...

www.kufatec.de

Kufatec GmbH & Co. KG • Dahlienstr. 15 • 23795 Bad Segeberg • e-mail: [email protected]

Version 1.07

(25.03.2013)

Installation manual

FISCUBE®

Audi

Article-ID 38358

38358-1

38359

For factory equipment

MMI High (2G)

MMI High Navigation Plus (3G)

MMI Navigation Plus with MMI touch (3G Plus)

1

General advice .........................................................................................................................................2

Content

Safety Instructions....................................................................................................................................3

References of legal regulations for operation ...........................................................................................3

FISCUBE..................................................................................................................................................4

Scope of delivery......................................................................................................................................5

Wiring diagram .........................................................................................................................................5

Installation instruction MMI 2G .................................................................................................................6

Interface connection MMI 2G....................................................................................................................7

Connection Video loom MMI 2G...............................................................................................................9

Connection video loom MMI 2G – RVC available ...................................................................................10

Installation instruction MMI 3G / MMI 3G Plus ........................................................................................11

Interface connection MMI 3G/ MMI 3G Plus ...........................................................................................13

Connection video loom MMI 3G/ MMI 3G Plus .......................................................................................14

Coding....................................................................................................................................................17

USB-connection .....................................................................................................................................18

Control elements ....................................................................................................................................19

Start Up..................................................................................................................................................21

Operation instruction MMI 2G.................................................................................................................24

Operating instruction MMI 3G.................................................................................................................32

Operating instruction MMI 3G Plus .........................................................................................................40

Additional video input 2G/ 3G/ 3GPlus ...................................................................................................47

Video output ...........................................................................................................................................47

Connection in case of factory fitted analog TV MMI 2G ..........................................................................48

2

General adviceWhile developing this product, your personal safety combined with the best operating service, modern design and an up-to-date production technique was especially taken into account.

Unfortunately, despite the utmost care injuries and/or damages might occur due to improper installation and/or use.

Please read the attached instruction manual completely with great care and keep it!

All articles of our production line pass through a 100 % check - for your safety and security.

We reserve the right to carry out technical changes which serve the improvement at any time.

According to each article and purpose, it is sometimes necessary to check each country’s legal regulations before installing and starting the unit.

In case of guarantee claims, the device has to be sent back to the seller in the original packaging with the attached bill of purchase and detailed defect‘s description. Please pay attention to the manufacturer‘s return

requirements (RMA). The legal warranty directions are valid.

The guarantee claim as well as the operating permission becomes invalid due to:

a) unauthorized changes to the device or accessories which have not been approved or carried out by the manufacturer or its partners

b) opening the device‘s frame

c) device‘s repairs carried out by one‘s own

d) improper use / operation

e) brute force to the device (drop, wilful damage, accident etc.)

During installation, please pay attention to all safety relevant and legal directions. The device has only to

be installed by trained personnel or similarly qualified people.

Please limit on installation or function problems the troubleshooting to 0.5 hours for mechanical

and 1.0 hours for electronic works.

To avoid unnecessary work and to save costs, please send us immediately via the

http://www.kufatec.de/shop/de/infocenter/

contact form Kufatec

( ) a request to our technical support.

Please quote the following necessarily:

Vehicle Identification Number

Part number of the retrofit kit

Detailed description of problems

Already conducted operations

http://www.kufatec.de/shop/de/infocenter/

3

Safety InstructionsInstallation requires special knowledge.

Do not install the unit yourself. For safe and reliable installation, consult a dealer having special knowledge.

• Never use bolts or nuts from the car’s safety devices for installation. If bolts or nuts from the steering wheel ,brakes or other safety devices are used for installation of the unit, it may cause an accident.

•Use the unit with a DC 12V negative ground car. This unit cannot be used in large trucks which use a DC 24V battery. If it is used with a DC 24V battery, it may cause a fire or accident.

• Avoid installing the unit in following places: - Where it would hinder your safe driving. - Where it could damage the car’s fittings.

• This unit is only for use in the following vehicles. Only connections described within this instruction guide are allowed or required to use for installation.

• For damage impact caused by faulty installation, unsuitable connections inappropriate vehicles Kufatec GmbH assumes no liability.

• We advise you that these units process datas out of the MOST - protocol from the vehicle. As the supplier of this device we don‘t know the overall system you are working with. If our device causes damage due to other changes made by to the vehicle Kufatec GmbH assumes no liability.

• Kufatec GmbH supplier do not guaranty the use of the product for changing’s within a new vehicle series.

• If the car manufacturer’s don‘t agree with the installation of our device by reason of warranty the Kufatec GmbH assumes no liability. Please check conditions and warranty before you begin the installation.

• Kufatec GmbH supplier reserves the right to change the device specifications without notice.

NOTE: The road traffic has to have your full attention.

Telephone operations should only be done by suitable traffic and weather situations. The volume need to be set that you are still able to realise acoustic warn signals (Police, fire brigade).

• Errors and changes excepted.

References of legal regulations for operationOnly use this unit in the intended domain.

If you use it in a foreign domain, if the unit is not installed properly, or if the unit will be reconstructed, the guarantee will expire.

http://www.dict.cc/englisch-deutsch/errors.html

http://www.dict.cc/englisch-deutsch/and.html

http://www.dict.cc/englisch-deutsch/omissions.html

http://www.dict.cc/englisch-deutsch/excepted.html

FISCUBE

Features

DVB-T – Integrated DVB-T receiver with TV recording functionE13 approval - 10R-03-12423Video/Audio coding: MPEG II (No MPEG4 /HDTV)TV recording stored on USB source – Recording capacity 3h with an 5GB USB-memoryTV recording format: *.mpg Dimensions (LxBxH): 11,4cm x 9,2cm x 3,1cm

USB - USB connection for memory stick or HDD (FAT 32) – limited capacity 40GBNOTE: Only for hard drives with current consumption not more than 500mA - it's necessary to have a external power supply with capacity over 500mA.Supported audio format: mp3, wav Supported video format: mpg; *.dat; *.vob; *.avi with MPEG4 ASP.USB extension must not be longer than 2 meter!

NOTE USB Root directory

Up to 95 entries can be stored within the root directory. Each entry can include another 95 entries.

NOTE: Entries consists of single files as well as directories.

NOTE: Before installing the multimedia system you need to check whether the car is retrofitted with an interface not developed by Kufatec GmbH & Co. KG. In case a non-Kufatec interface is fitted we are not able to guaranty the absolute operation of the FISCUBE system. You may need to remove the non-Kufatec interface.

NOTE: Fiber optical looms MUST NOT BE CRACKED! The recommended radius for fitting is 40 mm.

In case of incorrect fitting we are not able to guaranty the absolute operation of the multimedia system.

NOTE: After the very first installation the system is completing an automatic generated search for available TV channels. For refreshing the channel list please see section „Start –up”.

.

Make sure no wires are wound up. You produce a coil and thus maybe failures.NOTE:

NOTE: Do not cover the louver so that the device does not overheat

4

5

Scope of deliveryFISCUBE InterfaceWiringAerials 2x

Wiring diagram

Fig.1

* If factory fitted

Note MMI 2G: In case the vehicle is not factory fitted with rear view camera (RVC) the displayinterface needs to be replaced. A displayinterface with FBAS input is needed. After replacing the displayinterface the component protection needs to be removed.Please contact your local Audi dealer.

Detailed information please see page 46

6

Installation instruction MMI 2G

For vehicles WITHOUT factory fitted rear view camera

Fig. 2

1 – Radiobox A4 8K, A5 8T, A6 4F, A8 4E 2 – Radiobox Q7 4L

3 – Displayinterface A4 8K, A5 8T 4 – Displayinterface A6 4F, A8 4E, Q7 4L

5 – FISCUBE Interface

For vehicles WITH factory fitted rear view camera

Fig. 3

1 – Radiobox A4 8K, A5 8T, A6 4F 2 – Radiobox Q7 4L

3 – RVC – control unit Q7 4L 4 – RVC – control unit A4, A5, A6 4F, A8 4E


Location Radiobox

The fitting location of the radiobox can be verify within the vehicle.

A4 8K, A5 8T, A6 4F, A8 4E Q7 4L

Fig.4 Fig.5 Fig.6

7

Interface connection MMI 2G

Fiber optic cable

The connection will be completed plug & play on the back of the radiobox.

Fig.7

Remove the original fiber optical cable of the radiobox (Fig. 8). Join the original fiber optical connector to the female connector of the delivered loom (Fig. 9).

Fig.8 Fig.9

Put the optical connector of the delivered loom to the radiobox (Fig. 10). ). Figure 11 is showing the final connection of the Interface.

Fig.10 Fig.11

8

Join the 18-pole connector as well as the fiber optical to the interface (Fig. 12).

Fig.12 Fig.13

Aerials

To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other parts – which may prevent a good signal reception.

Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess the ideal location for the positioning of the aerials within the vehicle.

NOTE: Sequence of Installation – Aerials needs to be connected to the interface FIRST. AFTER connecting the aerials the power supply can be completed. In case this sequence will be not considered the TV reception can be weak. The number of available channels could decrease.

Power

The connection will be completed plug & play on the back of the radiobox. Remove the original power connector of the radiobox (Fig. 14). Join the original connector to the female connector of the delivered loom (Fig. 15).

Fig.14 Fig.15

Put the connector of the delivered loom to the radiobox (Fig. 16). Figure 17 is showing the final connection of the multimedia interface.

Fig.16 Fig.17

9

Connection Video loom MMI 2G

For vehicles WITHOUT factory fitted rear view camera

Wire the loom into the front of the vehicle (Fig. 18 - 20).

Fig.18 Fig.19 Fig.20

A4 8K, A5 8T

Remove the climate control with suitable tools (Fig. 21). Remove the CD-changer (Fig. 22). Loosen the necessary screws of the displayinterface and remove it (Fig. 23).


A6 4F, A8 4E, Q7 4L

Loosen the necessary screws of the glove box (Fig. 24, 25). Remove the displayinterface (Fig. 26).


10

Connect the video loom to the displayinterface (Fig. 27).

In case the vehicle is not factory fitted with rear view camera (RVC) the displayinterfaceneeds to be replaced – Kufatec Article-ID. 35600

Notes please see page 46

Fig.27

Connection video loom MMI 2G – RVC available

For vehicles WITH factory fitted rear view camera

Location RVC-control unit

Depending of the vehicle the RVC-control unit is fitted on different fitting locations.

A4 8K, A5 8T, A6 4F, A8 4E Q7 4L

Fig.28 Fig.29

Connect the video loom to the RVC-control unit - FAKRA BROWN (Fig. 30).

Fig.30

11

Installation instruction MMI 3G / MMI 3G Plus

Fig. 31

1 – Radiobox A4/ A5, A6 4F, A6-A7 4G, A8 4E, Q5 8R 2 – Radiobox Q7 4L

3 – Radiobox A8 4H 4 – 3G unit A4/A5, A6 4G, A7 4G, A8 4H, Q5, Q7

5 – MMI 3G unit A6 4F 5 – DVD changer A8 4H


Audi A4 8K, A5 8T, A6 4F, Q5 MMI 3G

Loosen the necessary screws of the trunk cover on the left hand side (Fig. 32). The radiobox is located behind the cover (Fig. 34).


Audi Q7 4L MMI 3G

Remove the trunk cover on the right hand side. The radiobox is located behind (Fig. 36).

Fig.35 Fig.36

12

Audi A8 4H

Remove the trunk cover on both sides. Remove the cover of the rear seats (Fig. 39).


Loosen the necessary screws of the bracket of the comfort control unit (Fig. 40, 41). The radiobox is located behind (Fig. 42).


Audi A6 4G, A7 4G

Remove the cover on the left hand side of the trunk. The radiobox is situated in the bottom part of the control unit rack.

13

Interface connection MMI 3G/ MMI 3G Plus

Fiber optic cable

The connection will be completed plug & play on the back of the radiobox.

Remove the original fiber optical cable of the radiobox (Fig. 43). Join the original fiber optical connector to the female connector of the delivered loom (Fig. 44).

Fig.43 Fig.44

Put the optical connector of the delivered loom to the radiobox (Fig. 45). Figure 46 is showing the final connection of the multimedia interface.

Fig.45 Fig.46

Join the 18-pole connector as well as the fiber optical to the interface (Fig. 47).

Fig.47 Fig.48

14

Aerials

To ensure correct operation, aerials should be installed far from: - shielded glasses/ Bodywork/ Other parts – which may prevent a good signal reception.

Mount the supplied areal horizontally or vertically. It is recommended to try different positions to assess the ideal location for the positioning of the aerials within the vehicle.

NOTE: Sequence of Installation – Aerials needs to be connected to the interface FIRST. AFTER connecting the aerials the power supply can be completed. In case this sequence will be not considered the TV reception can be weak. The number of available channels could decrease.

Power

With the connection of 2 new wires to the Quadlock connector of the radiobox you will complete the fitting of the power supply. Please see Fig 50. In order to achieve a proper connection we recommend both crimping and soldering the new wires.

BROWN (Ground) – PIN 17 RED (Steady plus) – PIN 18

NOTE: Color of the loom can be gray – Connection according loom printing.

Fig. 49 Fig.50

Connection video loom MMI 3G/ MMI 3G PlusWire the video loom in the front oft he vehicle (Fig. 51 - 53).


15

A4 8K, A5 8T, Q5 8R, Q7 4L

Remove the MMI 3G unit using suitable tools (Fig. 54, 55).

Fig.54 Fig.55

A6 4F, A8 4E

Loosen the necessary screws of the glove box (Fig. 56, 57).

Fig.56 Fig.57

A8 4H

Loosen the screw of the center consol cover (Fig. 58) as well as the screws of the MMI 3G unit cover (Fig. 59). Remove the MMI 3G unit.


16

A7 4G, A6 4G

Climate control needs tob e removed by using suitable tools (Fig. 61). Loosen the screw of the MMI 3G head unit (Fig. 62). Remove the MMI 3G unit of the center console.


Connect the video loom to the MMI 3G unit – FAKRA GREEN (Fig. 64).

Fig.64

NOTE: In case the vehicle is factory fitted with DVD-changer (e.g. A8 4H, A7 4G) the video loom has to be connected to the DVD-changer.

Fig.65 Fig.66

17

CodingAfter installation the system needs to be coded. Please contact an Audi dealer.

In order to code the vehicle system you need to choose the Self-Diagnosis. Please complete the coding step by step as shown on images below.

Address 19

Vehicle Self-Diagnosis Address 19 Diagnostic interface

Coding Coding list

TV-Tuner needs to be set from not coded to coded - confirmation

18

USB-connectionConnecting of USB-memory sticks or hard disc drives (HDD)

MP3 music / video via USB

The whole memory capacity (Audio + Video) is up to 40GB - Format FAT32

NOTE: Only for hard drives with current consumption not more than 500mA - it's necessaryto have an external power supply with capacity over 500mA.

Root directory for the complete USB source (audio + video):

Up to 95 entries can be stored within the root directory. Each entry can include another 95 entries.

NOTE: Entries consists of single files as well as directories.

Supported audio format: *.mp3, *.wav

Supported video format: *.mpg; *.dat; *.vob; *.avi (MPEG4 ASP, XviD, DivX4.0/5.0/6.0)

Files will be filtered autom. – In USB audio mode only audio files will be displayed. In USB video mode only video files will be displayed.

Last-Position-Memory:

- For music files - For video files

- the last listen track will start again from the beginning- will start again directly where the video has been stopped playing

TV Recording

NOTE: In order to record TV an USB source has to be connected. The source need to have enough capacity for recording.

Recording capacity 3h with an 5GB USB-memory

TV recording format: *.mpg

19

Control elements

Multifunctional steering wheel

By pushing the MODE/ARROW button you will reach the TV menu (Fig. 67, 68).

By using the SCROLL you will select the single channels. Push the SCROLL for selecting the channel. Volume adjustment will be done with the SCROLL on the right hand side.

Example A5 8T

Fig. 67

Example A8 4H

Fig. 68

Driver information system

The FISCUBE channels will be displayed within the driver information system.

Example A5 8T Example A8 4H

Fig.69 Fig.70

20

MMI operation panel

OEM-menu driven operation by using the MMI panel.

After pressing the button MEDIA or CD/TV (Fig. 71, 72) the TV source can be selected. After that the

FISCUBE can controlled by using the rotate controller as well as the control key (Fig. 74).

Example MMI 2G/ MMI 3G

Fig.71 Fig.72

Example A8 4H

Fig.73 Fig.74

21

Start Up

Start up will be displayed in the following on MMI 3G. It is the same procedure for MMI 2G as well as MMI 3G Plus.

1. Push the MEDIA button – TV-Tuner needs to be selected (Fig. 76).

Fig.75 Fig.76

2. Scroll down to…99 SETUP > selecting

Fig.77

Media

99 ---

99 Record

99 Setup99 USB-Audio

99 USB-Video

Programme

12:00

Push knob AGAIN >…

3. Select REGION & LANGUAGE >

Fig.78

Media

1 Exit Setup

2 Region&Langu3 Autoscan

4 Vol +

5 Vol -

Programme

12:00


4.

22

Select REGION (e.g. GERMANY)

Fig.79

Media

Finland

France

Germany…

Programme

12:00


5. Select LANGUAGE (e.g. GERMAN)

Fig.80

Media

Finnisch

French

GermanIndonesian

Programme

12:00


6. Select 99 SETUP >

Fig.81

Media

99 ---

99 Record


99 USB-Video

Programme

12:00


7.

23

Select AUTOSCAN > Search will start automatically

Fig.82

Media

1 Exit Setup

2 Region&Langu

3 Autoscan4 Vol +

5 Vol -

Programme

12:00

When auto search has finished the system will switch the first channel.


8. Select 99 SETUP >

Fig.83

Media

99 ---

99 Record


99 USB-Video

Programme

12:00


9. Select VOL + > Set the volume to the same level of the radio or other sources of the vehicle.

Fig.84

Media

1 Exit Setup

2 Region&Langu

3 Autoscan

4 Vol +5 Vol -

Programme

12:00

Leave the settings through the menu EXIT SETUP.

24

Operation instruction MMI 2G

Push the MEDIA or CD/TV button – TV-Tuner needs to be selected (Fig. 86).

Fig.85 Fig.86

TV

CD

Audi music interface

TVExterne AV Quelle 1

Externe AV Quelle 2

12:00

Quelle

Channel list

Single channels can be selected of the channel list by using the knob (Fig. 87).

Fig.87

TV

WDR Köln

Kabel eins

N24

ProSieben

SAT.1

12:00

Manual channel selection

Press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using the knob you can switch between the single channels (Fig. 88).

Fig.8812:00

TV

Manuell

ProSieben

Sendervor

25

TV Recording

USB-memory/ HDD (FAT 32) needs to be connected to the USB connection.

Select TV source > scroll down to > 99 RECORD.

> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed (Fig. 90).

Fig.89 Fig.90

TV

12:00

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

RECRECSelect 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_TV.

Playing TV records

Select TV source > scroll down to > 99 USB-VIDEO > selecting

Push knob AGAIN >…> Select directory RECORDED_TV … >

Push knob AGAIN >…> Select the recorded file you want to play (Fig. 93).

Fig.91 Fig.92

TV

12:00

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

TV

12:00

TV

..

Video 1

Video 2

Recorded_TV

Fig.9312:00

TV

TV

..

Aufnahme 1

Aufnahme 2

Aufnahme 3

26

Store TV channels as a favorite

1. Option: Select channel and press MEMORY. Select a suitable position and confirm by using the knob again (Fig. 95).

Fig.94 Fig.95

TV

12:00

Speicher

WDR Köln

Kabel eins

N24

ProSieben

SAT.1

TV

12:00

Speicher

1:

2: Hier N24 speichern

3:

4:

5:

N24 speichern

2. Option: Select channel and press TV CONTROL > STORE. Select a suitable position and confirm by using the knob again (Fig. 97).

Fig.96 Fig.97

TV

12:00Manuell

ProSieben

Speichern

TV

12:00

Speicher

1:

2: Hier ProSieben speichern

3:

4:

5:

ProSieben speichern

Teletext TXT

While watching TV press TV CONTROL > TT (Fig. 98). Select a teletext site by using the knob.

Turning SLOW – Teletext will switch in single numbersTurning FAST – Teletext will switch in numbers of 100

NOTE: You are not able to enter teletext numbers.

Fig.98 Fig.9912:00

TV

Manuell

ARD

TT

TT

Teletext

ARD Text15.10 Sturm der Liebe . . . 31716.00 Tagesschau UT16.10 Sportschau live . . . 321

WM-Vergabe: Nun keine Untersuchung… 217Plusminus: u.a zu Atomausstieg 604USA Reise: Merkel trifft Obama.. 109

+-100

100

27

EPG Electronic Program Guide

While watching TV press TV CONTROL > EGP (Fig. 100).

NOTE: The display of EPG information could take a while. The channels will be refreshed step by step.EPG information can only be displayed if available.

Fig.100 Fig.101

TV

12:00Manuell

ZDF

EPGProgramm-information

0019 Das Erste

0020 Tele 5

0021 QVC

0022 DAS VIERT

0023 Channel21/E

0024 RTL HH SH

0025RTL2

0026 SRTL

Program List 2011/6/17 08:20:32

MP3 Music


Select TV source > scroll down to > 99 USB-AUDIO

>Select 99 USB-AUDIO … >

Fig.102

TV

12:00

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video


>Select DIRECTORY or MUSIC FILE for playing (Fig. 103).

Fig.10312:00

TV

TV

..

21 – Herbert Grönemeyer –

22 – Jennifer Lopez –

23 – Bon Jovi –

24 – Lady Gaga –

28

NOTE: With menu .. you will step back to the previous directory.

Display of track information as well as interpret (Fig. 104)

Fig.104

Music

00:10/04:03

Er gehört zu mirMarianne Rosenberg

Music

00:10/04:03


Manual selecting of music files

While listening to the music press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using the knob the next or previous file can be selected (Fig. 105).

Fig.105

TV

12:00Manuell

ProSieben

Sendervor

Music fast forward/ fast backward

While listening to the music press the buttons TV CONTROL > MANUAL DOWN or MANUAL UP.While using the knob the needed speed can be selected (Fig. 106).

2x – 4x – 8x – 20x

Fig.10612:00

TV

Manuell

ProSieben

Manuellvor

29

Video


Select TV source > scroll down to > 99 USB-VIDEO > selecting … >


> Select DIRECTORY or VIDEO FILE for playing (Fig. 108).

Fig.107 Fig.108

TV

12:00

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

TV

12:00

TV

..

Forrest Gump

Der Pate II

Titanic

Fight Club


Manual selecting of video files

While watching video press the buttons TV CONTROL > SEEK DOWN or SEEK UP. While using the knob the next or previous video file can be selected. (Fig. 109).

Fig.109

TV

12:00Manuell

ProSieben

Sendervor

NOTE: Only video files within the same directory can be selected.

30

Video fast forward/ fast backward

While watching video press the buttons TV CONTROL > MANUAL DOWN or MANUAL UP. While using the knob the needed speed can be selected (Fig. 110).

2x – 4x – 8x – 20x

Fig.110

TV

12:00Manuell

ProSieben

Manuellvor

Setup

Select TV source > scroll down to > 99 SETUP > selecting

The following settings can be done (Fig. 112)

Region & Language – Selecting region + language

Autoscan –search for available channels

Vol+ – volume up

Vol- – volume down

Aspect Ratio – selecting picture size

Reset – restart of the FISCUBE device

Fig.111 Fig.112

TV

12:00

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Exit Setup

Region&Langu

Autoscan

Vol +

Vol -

TV

12:00

31

Settings

Within the TV mode press the SETUP button.


Brightness/ Contrast/ Color

Fig.113 Fig.114

TV

12:00

Helligkeit

Kontrast

Farbe

Tint

Mehrkanal

TV-Norm

Example Brightness

Fig.115

min maxmin max

Setup TV

12:00

Helligkeit

Aspect Ratio

In case the image is cut please select the menu 99-SETUP > ASPECT RATIO and choose the suitable picture size (available from FISCUBE software-Index 1.17).

Fig.116 Fig.117

Exit Setup

Region&Langu

…

Aspect Ratio

TV

12:00

4:3

16:9

OFF

TV

12:00

32

Operating instruction MMI 3G

Push the MEDIA button – TV-Tuner needs to be selected (Fig. 119).

Fig.118 Fig.119

Channel list


Fig.120

Media

WDR Köln

kabel eins

N24

ProSieben

SAT.1

Programme

12:00


1. Option: Press the buttons TV CONTROL > CH. While using the knob you can switch between the single channels (Fig. 121)

2. Optionswitch between the

: Press the buttons TV CONTROL > Symbol or . While using the knob you can single channels (Fig. 122).

Fig.121 Fig.122

Media

ProSieben

12:00

CH

Manuell

Media

ProSieben

12:00Manuell

33

TV Recording



> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed(Fig. 124).

Fig.123 Fig.124

Media

99 ---

99 Record99 Setup

99 USB-Audio

99 USB-Video

Programme

12:00RECREC

Select 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_TV.

Playing TV records




Fig.125 Fig.126

Media

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Programme

12:00

Media

TV

…

Video 1

Video 2

Recorded_TV

Programme

12:00

Fig

Media

.127

TV

…

Aufnahme 1

Aufnahme 2

Aufnahme 3

Programme

12:00

34


Select channel and press MEMORY. Select a suitable position and confirm by using the knob again (Fig. 129).

Fig.128 Fig.129

Media

WDR Köln

kabel eins

N24

ProSieben

SAT.1

Programme

12:00

Speicher Media

1:

2: Hier N24 speichern

3:

4:

5:

N24 speichern

12:00

Speicher

Teletext TXT

While watching TV press TV CONTROL > TT (Fig. 130). Select a teletext site by using the knob.



Fig.130 Fig.131

Media

ProSieben

12:00Manuell

Teletext

TT

ARD Text15.10 Sturm der Liebe . . . 31716.00 Tagesschau UT16.10 Sportschau live . . . 321


+-100

100

35


While watching TV press TV CONTROL > EGP (Fig. 132).

NOTE: The display of EPG information could take a while. The channels will be refreshed step by step. EPG information can only be displayed if available.

Fig.132 Fig.133

Media

ProSieben

12:00Manuell

Programminfos

EPG

TV EPG

12:00Manuell

ZDF

12:00 Serie…

15:30

3sat

16:45 Spielfilm…

17:30

MP3 Music



>Select 99 USB-AUDIO … >

Fig.134

Media

99 ---

99 Record

99 Setup

99 USB-Audio99 USB-Video

Programme

12:00


>Select DIRECTORY or MUSIC FILE for playing (Fig. 135).

Fig

Media

.135

TV..21 – Herbert Grönemeyer –22 – Jennifer Lopez –23 – Bon Jovi –24 – Lady Gaga –

Programme

12:00

36



Fig.136

Media

Programme

12:00

Music

00:10/04:03


Music

00:10/04:03



While listening to the music press TV CONTROL > Symbol or . While using the knob the next or previous file can be selected (Fig. 137).

Fig.137

Media

ProSieben

12:00Manuell

Music fast forward/ fast backward

While listening to the music press TV CONTROL > CH. While using the knob the needed speed can be selected (Fig. 138).

2x – 4x – 8x – 20x

Fig.138

Media

ProSieben

12:00

CH

Manuell

37

Video




> Select DIRECTORY or VIDEO FILE for playing (Fig. 140).

Fig.139 Fig.140

Media

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Programme

12:00

Media

Programme

12:00

TV

..

Forrest Gump

Der Pate II

Titanic

Fight Club



While watching video press TV CONTROL > Symbol or . While using the knob the next or previous video file can be selected (Fig. 141).

Fig.141

Media

ProSieben

12:00Manuell


38

Video fast forward/ fast backward

While watching video press TV CONTROL > CH. While using the knob the needed speed can be selected (Fig. 142).

2x – 4x – 8x – 20x

Fig.142

Media

ProSieben

12:00

CH

Manuell

Setup





Vol+ – volume up




Fig.143 Fig.144

Media

99 ---

99 Record


99 USB-Video

Programme

12:00

Media

Exit Setup

Region&Langu

Autoscan

Vol +

Vol -

Programme

12:00

39

Settings



Brightness/ Contrast/ Color

Fig.145 Fig.146

Setup TV

Helligkeit

Kontrast

Farbe

Tint

Mehrkanal

TV-Norm

12:00

Example Brightness

Fig.147

Setup TV

Helligkeit

12:00Manuell

min max

Aspect Ratio


Fig.148 Fig.149

Media

Exit Setup

Region&Langu

…

Aspect Ratio

Programme

12:00

Media

4:3

16:9

OFF

Programme

12:00

40

Operating instruction MMI 3G Plus

Push the MEDIA button – TV-Tuner needs to be selected (Fig. 151).

Fig.150 Fig.151

Media Quelle

Jukebox

Leer

Leer

Nicht verbunden

TV Tuner

Channel list


Fig.152

Media Quelle

ZDF

3sat

Neo/KiKa

ZDFinfokanal

Bayerisches FS

MDR Fernsehen

Speicher

Funktionen Einstellungen


Select menu FUNCTIONS.

While using the options SEEK DOWN or SEEK UP you can switch between the single channels(Fig. 153).

Symbol

Fig.153 Fig.154

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPG

Suchlauf zurück

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPG

Suchlauf vor

41

TV Recording



> Select 99 RECORD in order to START recording. During recording a REC symbol will be displayed (Fig. 156).

Fig.155 Fig.156

Media Quelle

ZDF

3sat

Neo/KiKa

99 ---

99 Record

99 Setup

Speicher

Funktionen Einstellungen RECRECSelect 99 RECORD again in order to STOP recording. The record will be stored within directory RECORDED_TV.

Playing TV records




Fig.157 Fig.158

Media Quelle

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Speicher


Media Quelle

TV

..

Video 1

Video 2

Recorded_TV

Speicher


Fig.159

Media Quelle

TV

..

Aufnahme 1

Aufnahme 2

Aufnahme 3

Speicher


42


Select the menu FUNCTIONS. Select STORE CHANNEL. Select a suitable position and confirm by using the knob again (Fig. 161).

Fig.160 Fig.161

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPGSender speichern

MediaSpeicher

1

2

3 Phoenix hier speichern

4

5

Teletext TXT

While watching TV press FUNCTIONS > TELETEXT (Fig. 162). Select a teletext site by using the knob.



Fig.162 Fig.163

Media

Funktionen

ARD

Sturm der

0:00 – 0:00

EPG

Teletext

Media

Funktionen

ARD

Sturm der

0:00 – 0:00

EPG

Teletext

ARD Text

15.10 Sturm der Liebe . . . 31716.00 Tagesschau UT16.10 Sportschau live . . . 321


+-100

100

43



While watching TV press FUNCTIONS > EGP (Fig. 164).

NOTE: The display of EPG information could take a while. The channels will be refreshed step by step. EPG information can only be displayed if available.

Fig.164 Fig.165

EPG

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPG

EPG

ZDF

12:00 Serie…

15:30

3sat

16:45 Spielfilm…

17:30

Funktionen

QuelleSpeicher

Einstellungen

MP3 Music



>Select 99 USB-AUDIO … > (Fig. 167).

Fig.166 Fig.167

Media Quelle

WDR Köln

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Speicher


Media Quelle

TV

..

21 – Herbert Grönemeyer –

22 – Jennifer Lopez –

23 – Bon Jovi –

24 Lady Gaga –

Speicher



Fig.168

Music

00:10/04:03

Er gehört zu mir Hitmix

Marianne Rosenberg

Music

00:10/04:03

Er gehört zu mir Hitmix

Marianne Rosenberg

44


While listening to the music press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the nextor previous music file (Fig. 169).

Symbol

Fig.169

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPG

Suchlauf zurück

Video




> Select DIRECTORY or VIDEO FILE for playing (Fig.171).

Fig.170 Fig.171

Media Quelle

99 ---

99 Record

99 Setup

99 USB-Audio

99 USB-Video

Speicher


Media Quelle

TV

..

Forrest Gump

Der Pate II

Titanic

Fight Club

Speicher



45


While watching video press FUNCTIONS > SEEK DOWN or SEEK UP in order to select the next or previous video file (Fig. 172).

Symbol

Fig.172

Media

Funktionen

Phoenix

VOR ORT

0:00 – 0:00

EPG

Suchlauf zurück


Setup





Vol+ – volume up




Fig.173 Fig.174

Media Quelle

ARD

WDR Köln

99 ---

99 Record

99 Setup

99 USB-Audio

Speicher


Media Quelle

Exit Setup

Region & Language

Autoscan

Vol +

Vol –

Reset

Speicher


46

Settings



Brightness/ Contrast/ ColorExample Brigtness

Fig.175 Fig.176

Media

Einstellungen

Helligkeit

Kontrast

Farbe

Tint

Mehrkanalton

TV-Norm

Media

Einstellungen

Helligkeit

min max

Einstellungen

Aspect Ratio


Fig.177 Fig.178

Media Quelle

Exit Setup

Region & Language

…

…

Aspect Ratio

Speicher


Media Quelle

4:3

16:9

OFF

Speicher


47

Additional video input 2G/ 3G/ 3GPlusNote: No processing of audio signals – only video signals

Remove the housing of the 18-pole connector of the FISCUBE loom. Integrate the single PIN’s of theRCA -connector (Kufatec article-ID 35570) (Fig. 179).

PIN 2 – Video ground (Black)

PIN 1 – Video (Yellow)

The video source needs to be selected manually through the AV source on the MMI panel.

NOTE: No auto switch available by choosing the rear gear.

Fig.179 Fig.180

Media Quelle

Jukebox

Leer

Leer

Nicht verbunden

TV Tuner

Externer AV EingangAV

Video outputFor connecting to additional screens within the vehicle:

e.g. Head rest screens, Overhead screens

NOTE: No processing of audio signals – ONLY VIDEO signals

Join the adapter article-ID. 38392 with the FAKRA video loom of the FISCUBE wiring.

The RCA connector can connected to an additional screen.

NOTE: Depending on the number of additional screens a video booster may be required.

Fig.181

48

Connection in case of factory fitted analog TV MMI 2G

For vehicles with factory fitted analog TV tuner

NOTE: Not needed for MMI 3G/ 3G Plus

Location analog TV Tuner

The TV tuner is located with the infotainment rack of the vehicle (Fig. 182).

Item number 38323-2 (Fig. 183).

Fig.182 Fig.183

Factory fitted analog tuner needs to be removed.

Join wiring 38323-2 with the connections of the factory fitted TV-Tuner.

TV Tuner connector Red FAKRA GREEN

Fig.184 Fig.185 Fig.186

Join the 18-pole connector of the loom 38323-2 as well as the original fiber optical connector (TV tuner) to the interface (Fig. 186).

49

Replacement Displayinterface

NOTE: before replacing the displayinterface all MMI components needs to be updated to thelatest software index. Please get in contact with your local Audi dealer.

Neede update CD

Model CD-part number

A6 4F, A8 4E, Q7 4L 4L0 998 961

A4 8K, A5 8T 8K0 998 961

Procedure

Disconnect battery replace interface connect battery again

Turn ignition on remove component protection (Get in contact with your local Audi dealer – online connection is required)

Address 07 remove component protection (In some cases the coding machine is asking a blocking time – These time needs to be elapsed completely)

Additional coding Address 07

Country code, Vehicle – Note down the values of the old interface Copy the values into

the new interface

Additional adaption channels

Channel 01 – MMI device list (ACC, AAS, PDC, MFSW, TPMS, RVC)

Channel 02 – Options within CAR menu (Left hand drive, battery status)

Channel 11 – Additional MMI features (logbook, clima comfort, aux heating)

Channel 12 – Phone version (1 for PR-Nr. 9ZW --- 2 for PR-Nr. 9ZF)

Channel 13 – Protocol setting: 0 = A6, A8, Q7 / 8191 = A4 8K, A5 8T

Channel 111 – MMI start for activating the configurated values

NOTE: Kufatec GmbH & Co. KG has got no influence in deleting the component protection. In case it is not possible to delete the protection please get in contact with [email protected].

audi fiscube englisch - ima-boxima-box.de/support/manuals/fiscube_audi_en.pdf · operating...

Documents