atlas iot · 2020. 6. 14. · we are finally ready to install the atlas • iot ™ software....

Atlas iotInstallation guide

Datasheet V 1.6

Before we begin have the following items readily available:

SanDisk ultra micro SDHC, 16 gb cardUSB micro SD card readerRaspberry Pi 7” touchscreenRaspberry Pi 7" display caseRaspberry Pi power supplyMicro USB female to 2 micro USB male splitter cableWhitebox labs I2C TogglerWhitebox labs Tentacle T3USB Keyboard

Necessary items

Overview 1. Install Windows 10 iot dashboard

2. Flash micro SD card with Windows

3. Assemble hardware

4. Setup Wifi

5. Install Atlas • iot ™ software

This software is not yet compatible with Raspberry Pi 3B+

2 Copyright © Atlas Scientific LLC

https://www.amazon.com/SanDisk-Ultra-Micro-SDHC-16GB/dp/9966573445

https://www.amazon.com/IOGEAR-MicroSD-Reader-Writer-GFR204SD/dp/B0046TJG1U/ref=sr_1_7?ie=UTF8&qid=1539977020&sr=8-7&keywords=usb+sd+card+reader

https://www.amazon.com/Raspberry-Pi-7-Touchscreen-Display/dp/B0153R2A9I/ref=sr_1_3?ie=UTF8&qid=1539976925&sr=8-3&keywords=raspberry+pi+7+touch+screen+display

https://www.amazon.com/gp/product/B07G236GWJ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.amazon.com/NorthPada-Raspberry-Supply-Charger-Adapter/dp/B01N336XEU/ref=sr_1_4?ie=UTF8&qid=1539977229&sr=8-4&keywords=raspberry+pi+with+power+supply

https://www.amazon.com/Electop-Micro-Female-Splitter-Cable/dp/B017OPOG58/ref=sr_1_1?s=electronics&ie=UTF8&qid=1539890665&sr=1-1&keywords=micro+usb+splitter+1+male+to+2+female

https://www.atlas-scientific.com/product_pages/components/i2c-toggler.html

https://www.atlas-scientific.com/product_pages/components/tentacle-t3.html

https://www.amazon.com/AmazonBasics-KU-0833-Wired-Keyboard/dp/B005EOWBHC/ref=sr_1_2_sspa?ie=UTF8&qid=1539977503&sr=8-2-spons&keywords=usb+keyboards&psc=1

Download and install Windows 10 IoT Core Dashboard, which allows you to setup your Raspberry Pi from your PC.

Step 1

Insert the mico SD card, into the USB card reader and plug the card reader into your PC.

Step 2

Once the Windows 10 IoT Core Dashboard has been installed, open the program and select Setup a new device.

*Signing in with a Microsoft account is not required, click Skip this step.

Step 3

*

Micro SD card MUST be an UHS (Ultra High Speed) class 1, 16GB or larger.

Install dashboard

Micro SD card

Open dashboard


http://go.microsoft.com/fwlink/?LinkID=708576

Device type Raspberry Pi 2 and 3

OS Build Windows 10 IoT core 17763 (or higher)

Drive Your micro SD card

Device Name How you will see the Pi on your network

Password How you will access the Pi (remember your password)

Step 4 Installing windows on the SD card

Click download and install to put the IoT core software on your micro SD card. This will take ~4 min.

Once your micro SD card is ready, insert it into the Raspberry pi.


Yes, this is upside down. Don't worry. we will correct it in the next few steps.

Remember, EZO™ circuits MUST be put into I2C mode before they will work on a Raspberry Pi.

Step 5

Step 6

Assemble the hardware

Boot up

1 2

43


Once Windows 10 has finished booting up you will be asked to adjust a few settings. This is why you needed that USB keyboard.

After Windows has finished being setup, you will be brought to the IoT Core Default Application page.

After logging in, Windows will then ask you to connect to a WiFi network.Do not skip this step.

Step 7

Username: administratorpassword: password you created in step 4

WiFi


Now that Windows 10 is installed on your Raspberry Pi, prepare to install the Atlas • iot ™ software. Under My Devices you should now see your Raspberry Pi.

Click here and a web page will open and will ask you to log into your newly setup device.

Step 8 Prepare for install

double click

Username: administratorpassword: password you created in step 4


You are now in the device portal (back end) of your Raspberry Pi. Under Device Settings you can make adjustments to things like display orientation, resolution and time zones.

If you don't have any settings to adjust, move on to step 10.

If you make any changes the device must reboot before you can continue.

Step 9

If your screen appears upside down, you can correct it from this drop down menu.

Check this box

Adjust settings


We are finally ready to install the Atlas • iot ™ software. Download the software HERE.

Three more files are needed for the installation to be complete (they have to be added one at a time).

Click the check box that says Allow me to select framework packages, click Next and then click Browse (again), go back to your extracted zip file. Dependencies > ARM > (you will find three *.appx files in there. Double click the first file, and repeat this process for the remaining files.

Now, click install. The install process should take ~1 min.

Click on Apps > Apps manager. Click Browse, and locate atlas_iot_x.x.x.x_ARM.msix from the extracted zip file you just downloaded. Don’t hit install, you’re not done!

Once the zip file downloads, extract the files and head back to the IoT Core Device Portal.

Step 10 Install Atlas • iot ™


https://www.atlas-scientific.com/_files/software/Atlas_iot_software.zip

Once the installation is complete the Atlas • iot ™ software will be displayed on a list of installed apps. To begin running the software, click the startup button.

Installation complete!

Step 11 Startup


atlas iot · 2020. 6. 14. · we are finally ready to install the atlas • iot ™ software....

Documents