SECTION I IMATERIALS

Par t CSpecifications for Welding Rods, Electrodes, and Filler Metals

ASME BPVC. I I .C -2015

2015 ASME Boiler andPressure Vessel CodeAn International Code

IIMATERIALS

Part C

Specifications for WeldingRods, Electrodes, and FillerMetalsASME Boiler and Pressure Vessel Committeeon Materials

AN INTERNATIONAL CODE

2015 ASME Boiler &Pressure Vessel Code2015 Edition July 1, 2015

Two Park Avenue • New York, NY • 10016 USA

Date of Issuance: July 1, 2015

This international code or standard was developed under procedures accredited as meeting the criteria forAmerican National Standards and it is an American National Standard. The Standards Committee that approvedthe code or standard was balanced to assure that individuals from competent and concerned interests havehad an opportunity to participate. The proposed code or standard was made available for public review and com-ment that provides an opportunity for additional public input from industry, academia, regulatory agencies, andthe public-at-large.ASME does not “approve,” “rate,” or “endorse” any item, construction, proprietary device, or activity.ASME does not take any position with respect to the validity of any patent rights asserted in connection with any

items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liabilityfor infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard areexpressly advised that determination of the validity of any such patent rights, and the risk of infringement of suchrights, is entirely their own responsibility.Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as

government or industry endorsement of this code or standard.ASME accepts responsibility for only those interpretations of this document issued in accordance with the es-

tablished ASME procedures and policies, which precludes the issuance of interpretations by individuals.The endnotes and preamble in this document (if any) are part of this American National Standard.

ASME collective membership mark

Certification Mark

The above ASME symbol is registered in the U.S. Patent Office.

“ASME” is the trademark of The American Society of Mechanical Engineers.

The Specifications published and copyrighted by the American Welding Societyare reproduced with the Society’s permission.

No part of this document may be reproduced in any form, in an electronicretrieval system or otherwise, without the prior written permission of the

publisher.

Library of Congress Catalog Card Number: 56-3934Printed in the United States of America

Adopted by the Council of The American Society of Mechanical Engineers, 1914; latest edition 2015.

The American Society of Mechanical EngineersTwo Park Avenue, New York, NY 10016-5990

Copyright © 2015 byTHE AMERICAN SOCIETY OF MECHANICAL ENGINEERS

All rights reserved

TABLE OF CONTENTS

List of Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vForeword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viiStatement of Policy on the Use of the Certification Mark and Code Authorization in Advertising . . . . . . . . . . ixStatement of Policy on the Use of ASME Marking to Identify Manufactured Items . . . . . . . . . . . . . . . . . . . . . . ixSubmittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees . . . . . . . . . . . . . . . xPersonnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiiAWS Personnel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxixPreface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiGuideline on the Approval of New Welding and Brazing Material Classifications Under the ASME Boiler and

Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxiiSummary of Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxivList of Changes in Record Number Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xxxvCross-Referencing and Stylistic Changes in the Boiler and Pressure Vessel Code . . . . . . . . . . . . . . . . . . . . . . . xxxviSFA-5.01M/SFA-5.01 Welding Consumables — Procurement of Filler Materials and Fluxes . . . . . . . . . . 1SFA-5.02/SFA-5.02M Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes . 21SFA-5.1/SFA-5.1M Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding . . . . . . 33SFA-5.2/SFA-5.2M Specification for Carbon and Low-Alloy Steel Rods for Oxyfuel Gas Welding . . . . 77SFA-5.3/SFA-5.3M Specification for Aluminum and Aluminum-Alloy Electrodes for Shielded Metal Arc

Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87SFA-5.4/SFA-5.4M Specification for Stainless Steel Electrodes for Shielded Metal Arc Welding . . . . . 101SFA-5.5/SFA-5.5M Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding . . . . 139SFA-5.6/SFA-5.6M Specification for Copper and Copper-Alloy Electrodes for Shielded Metal Arc

Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193SFA-5.7/SFA-5.7M Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes . . 213SFA-5.8/SFA-5.8M Specification for Filler Metals for Brazing and Braze Welding . . . . . . . . . . . . . . . . 227SFA-5.9/SFA-5.9M Specification for Bare Stainless Steel Welding Electrodes and Rods . . . . . . . . . . . 269SFA-5.10/SFA-5.10M Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and

Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 297SFA-5.11/SFA-5.11M Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal

Arc Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327SFA-5.12/SFA-5.12M Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc

Welding and Cutting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 363SFA-5.13 Specification for Surfacing Electrodes for Shielded Metal Arc Welding . . . . . . . . . 375SFA-5.14/SFA-5.14M Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods . . . . 397SFA-5.15 Specification for Welding Electrodes and Rods for Cast Iron . . . . . . . . . . . . . . . . . 423SFA-5.16/SFA-5.16M Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods . . . 441SFA-5.17/SFA-5.17M Specification for Carbon Steel Electrodes and Fluxes for Submerged Arc Welding 451SFA-5.18/SFA-5.18M Specification for Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding 479SFA-5.20/SFA-5.20M Specification for Carbon Steel Electrodes for Flux Cored Arc Welding . . . . . . . . . 505SFA-5.21 Specification for Bare Electrodes and Rods for Surfacing . . . . . . . . . . . . . . . . . . . . 541SFA-5.22/SFA-5.22M Specification for Stainless Steel Flux Cored and Metal Cored Welding Electrodes

and Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 565SFA-5.23/SFA-5.23M Specification for Low-Alloy Steel Electrodes and Fluxes for Submerged Arc

Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 615SFA-5.24/SFA-5.24M Specification for Zirconium and Zirconium-Alloy Welding Electrodes and Rods . 655SFA-5.25/SFA-5.25M Specification for Carbon and Low-Alloy Steel Electrodes and Fluxes for Electroslag

Welding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 665SFA-5.26/SFA-5.26M Specification for Carbon and Low-Alloy Steel Electrodes for Electrogas Welding 689

iii

SFA-5.28/SFA-5.28M Specification for Low-Alloy Steel Electrodes and Rods for Gas Shielded ArcWelding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 715

SFA-5.29/SFA-5.29M Specification for Low-Alloy Steel Electrodes for Flux Cored Arc Welding . . . . . . . 747SFA-5.30/SFA-5.30M Specification for Consumable Inserts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 787SFA-5.31 Specification for Fluxes for Brazing and Braze Welding . . . . . . . . . . . . . . . . . . . . . 807SFA-5.32/SFA-5.32M Specification for Welding Shielding Gases . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 825SFA-5.34/SFA-5.34M Specification for NIckel-Alloy Electrodes for Flux Cored Arc Welding . . . . . . . . . . 839SFA-5.36/SFA-5.36M Specification for Carbon and Low-Alloy Steel Flux Cored Electrodes for Flux Cored

Arc Welding and Metal Cored Electrodes for Gas Metal Arc Welding . . . . . . . . 865

Mandatory Appendix I Standard Units for Use in Equations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 913

iv

ð15Þ LIST OF SECTIONSSECTIONSI Rules for Construction of Power Boilers

II Materials• Part A — Ferrous Material Specifications• Part B — Nonferrous Material Specifications• Part C — Specifications for Welding Rods, Electrodes, and Filler Metals• Part D — Properties (Customary)• Part D — Properties (Metric)

III Rules for Construction of Nuclear Facility Components• Subsection NCA — General Requirements for Division 1 and Division 2• Appendices• Division 1– Subsection NB — Class 1 Components– Subsection NC — Class 2 Components– Subsection ND — Class 3 Components– Subsection NE — Class MC Components– Subsection NF — Supports– Subsection NG — Core Support Structures– Subsection NH — Class 1 Components in Elevated Temperature Service*

• Division 2 — Code for Concrete Containments• Division 3 — Containments for Transportation and Storage of Spent Nuclear Fuel and High Level RadioactiveMaterial and Waste

• Division 5 — High Temperature Reactors

IV Rules for Construction of Heating Boilers

V Nondestructive Examination

VI Recommended Rules for the Care and Operation of Heating Boilers

VII Recommended Guidelines for the Care of Power Boilers

VIII Rules for Construction of Pressure Vessels• Division 1• Division 2 — Alternative Rules• Division 3 — Alternative Rules for Construction of High Pressure Vessels

IX Welding, Brazing, and Fusing Qualifications

X Fiber-Reinforced Plastic Pressure Vessels

XI Rules for Inservice Inspection of Nuclear Power Plant Components

XII Rules for Construction and Continued Service of Transport Tanks

* The 2015 Edition of Section III is the last edition in which Section III, Division 1, Subsection NH, Class 1 Components in Elevated TemperatureService, will be published. The requirements located within Subsection NH have been moved to Section III, Division 5, Subsection HB, Subpart Bfor the elevated temperature construction of Class A components.

v

INTERPRETATIONS

Interpretations of the Code have historically been posted in January and July at http://cstools.asme.org/interpreta-tions.cfm. Interpretations issued during the previous two calendar years are included with the publication of the applic-able Section of the Code in the 2015 Edition. Interpretations of Section III, Divisions 1 and 2 and Section III Appendicesare included with Subsection NCA.Following the 2015 Edition, interpretations will not be included in editions; they will be issued in real time in ASME's

Interpretations Database at http://go.asme.org/Interpretations. Historical BPVC interpretations may also be found inthe Database.

CODE CASES

The Boiler and Pressure Vessel Code committees meet regularly to consider proposed additions and revisions to theCode and to formulate Cases to clarify the intent of existing requirements or provide, when the need is urgent, rules formaterials or constructions not covered by existing Code rules. Those Cases that have been adopted will appear in theappropriate 2015 Code Cases book: “Boilers and Pressure Vessels” or “Nuclear Components.” Supplements will be sentor made available automatically to the purchasers of the Code Cases books up to the publication of the 2017 Code.

vi

ð15Þ FOREWORD*

In 1911, The American Society of Mechanical Engineers established the Boiler and Pressure Vessel Committee to for-mulate standard rules for the construction of steam boilers and other pressure vessels. In 2009, the Boiler and PressureVessel Committee was superseded by the following committees:

(a) Committee on Power Boilers (I)(b) Committee on Materials (II)(c) Committee on Construction of Nuclear Facility Components (III)(d) Committee on Heating Boilers (IV)(e) Committee on Nondestructive Examination (V)(f) Committee on Pressure Vessels (VIII)(g) Committee on Welding, Brazing, and Fusing (IX)(h) Committee on Fiber-Reinforced Plastic Pressure Vessels (X)(i) Committee on Nuclear Inservice Inspection (XI)(j) Committee on Transport Tanks (XII)(k) Technical Oversight Management Committee (TOMC)Where reference is made to “the Committee” in this Foreword, each of these committees is included individually and

collectively.The Committee’s function is to establish rules of safety relating only to pressure integrity, which govern the

construction** of boilers, pressure vessels, transport tanks, and nuclear components, and the inservice inspection of nu-clear components and transport tanks. The Committee also interprets these rules when questions arise regarding theirintent. The technical consistency of the Sections of the Code and coordination of standards development activities of theCommittees is supported and guided by the Technical Oversight Management Committee. This Code does not addressother safety issues relating to the construction of boilers, pressure vessels, transport tanks, or nuclear components, orthe inservice inspection of nuclear components or transport tanks. Users of the Code should refer to the pertinent codes,standards, laws, regulations, or other relevant documents for safety issues other than those relating to pressure integ-rity. Except for Sections XI and XII, and with a few other exceptions, the rules do not, of practical necessity, reflect thelikelihood and consequences of deterioration in service related to specific service fluids or external operating environ-ments. In formulating the rules, the Committee considers the needs of users, manufacturers, and inspectors of pressurevessels. The objective of the rules is to afford reasonably certain protection of life and property, and to provide a marginfor deterioration in service to give a reasonably long, safe period of usefulness. Advancements in design and materialsand evidence of experience have been recognized.

This Code contains mandatory requirements, specific prohibitions, and nonmandatory guidance for construction ac-tivities and inservice inspection and testing activities. The Code does not address all aspects of these activities and thoseaspects that are not specifically addressed should not be considered prohibited. The Code is not a handbook and cannotreplace education, experience, and the use of engineering judgment. The phrase engineering judgement refers to tech-nical judgments made by knowledgeable engineers experienced in the application of the Code. Engineering judgmentsmust be consistent with Code philosophy, and such judgments must never be used to overrule mandatory requirementsor specific prohibitions of the Code.

The Committee recognizes that tools and techniques used for design and analysis change as technology progressesand expects engineers to use good judgment in the application of these tools. The designer is responsible for complyingwith Code rules and demonstrating compliance with Code equations when such equations are mandatory. The Codeneither requires nor prohibits the use of computers for the design or analysis of components constructed to the

* The information contained in this Foreword is not part of this American National Standard (ANS) and has not been processed in accordancewith ANSI's requirements for an ANS. Therefore, this Foreword may contain material that has not been subjected to public review or a con-sensus process. In addition, it does not contain requirements necessary for conformance to the Code.

** Construction, as used in this Foreword, is an all-inclusive term comprising materials, design, fabrication, examination, inspection, testing,certification, and pressure relief.

vii

requirements of the Code. However, designers and engineers using computer programs for design or analysis are cau-tioned that they are responsible for all technical assumptions inherent in the programs they use and the application ofthese programs to their design.The rules established by the Committee are not to be interpreted as approving, recommending, or endorsing any pro-

prietary or specific design, or as limiting in any way the manufacturer's freedom to choose any method of design or anyform of construction that conforms to the Code rules.The Committee meets regularly to consider revisions of the rules, new rules as dictated by technological development,

Code Cases, and requests for interpretations. Only the Committee has the authority to provide official interpretations ofthis Code. Requests for revisions, new rules, Code Cases, or interpretations shall be addressed to the Secretary in writingand shall give full particulars in order to receive consideration and action (see Submittal of Technical Inquiries to theBoiler and Pressure Vessel Standards Committees). Proposed revisions to the Code resulting from inquiries will be pre-sented to the Committee for appropriate action. The action of the Committee becomes effective only after confirmationby ballot of the Committee and approval by ASME. Proposed revisions to the Code approved by the Committee are sub-mitted to the American National Standards Institute (ANSI) and published at http://go.asme.org/BPVCPublicReview toinvite comments from all interested persons. After public review and final approval by ASME, revisions are published atregular intervals in Editions of the Code.The Committee does not rule on whether a component shall or shall not be constructed to the provisions of the Code.

The scope of each Section has been established to identify the components and parameters considered by the Committeein formulating the Code rules.Questions or issues regarding compliance of a specific component with the Code rules are to be directed to the ASME

Certificate Holder (Manufacturer). Inquiries concerning the interpretation of the Code are to be directed to the Commit-tee. ASME is to be notified should questions arise concerning improper use of an ASME Certification Mark.When required by context in this Section, the singular shall be interpreted as the plural, and vice versa, and the fem-

inine, masculine, or neuter gender shall be treated as such other gender as appropriate.

viii

STATEMENT OF POLICY ON THE USE OF THE CERTIFICATIONMARK AND CODE AUTHORIZATION IN ADVERTISING

ASME has established procedures to authorize qualified organizations to perform various activities in accordancewith the requirements of the ASME Boiler and Pressure Vessel Code. It is the aim of the Society to provide recognitionof organizations so authorized. An organization holding authorization to perform various activities in accordance withthe requirements of the Code may state this capability in its advertising literature.

Organizations that are authorized to use the Certification Mark for marking items or constructions that have beenconstructed and inspected in compliance with the ASME Boiler and Pressure Vessel Code are issued Certificates ofAuthorization. It is the aim of the Society to maintain the standing of the Certification Mark for the benefit of the users,the enforcement jurisdictions, and the holders of the Certification Mark who comply with all requirements.

Based on these objectives, the following policy has been established on the usage in advertising of facsimiles of theCertification Mark, Certificates of Authorization, and reference to Code construction. The American Society of MechanicalEngineers does not “approve,” “certify,” “rate,” or “endorse” any item, construction, or activity and there shall be no state-ments or implications that might so indicate. An organization holding the Certification Mark and/or a Certificate ofAuthorization may state in advertising literature that items, constructions, or activities “are built (produced or per-formed) or activities conducted in accordance with the requirements of the ASME Boiler and Pressure Vessel Code,”or “meet the requirements of the ASME Boiler and Pressure Vessel Code.”An ASME corporate logo shall not be usedby any organization other than ASME.

The Certification Mark shall be used only for stamping and nameplates as specifically provided in the Code. However,facsimiles may be used for the purpose of fostering the use of such construction. Such usage may be by an association ora society, or by a holder of the Certification Mark who may also use the facsimile in advertising to show that clearly spe-cified items will carry the Certification Mark. General usage is permitted only when all of a manufacturer’s items areconstructed under the rules.

STATEMENT OF POLICY ON THE USE OF ASME MARKING TOIDENTIFY MANUFACTURED ITEMS

The ASME Boiler and Pressure Vessel Code provides rules for the construction of boilers, pressure vessels, and nuclearcomponents. This includes requirements for materials, design, fabrication, examination, inspection, and stamping. Itemsconstructed in accordance with all of the applicable rules of the Code are identified with the official Certification Markdescribed in the governing Section of the Code.

Markings such as “ASME,” “ASME Standard,” or any other marking including “ASME” or the Certification Mark shall notbe used on any item that is not constructed in accordance with all of the applicable requirements of the Code.

Items shall not be described on ASME Data Report Forms nor on similar forms referring to ASME that tend to implythat all Code requirements have been met when, in fact, they have not been. Data Report Forms covering items not fullycomplying with ASME requirements should not refer to ASME or they should clearly identify all exceptions to the ASMErequirements.

ix

ð15Þ SUBMITTAL OF TECHNICAL INQUIRIES TO THE BOILER ANDPRESSURE VESSEL STANDARDS COMMITTEES

1 INTRODUCTION

(a) The following information provides guidance to Code users for submitting technical inquiries to the committees.See Guideline on the Approval of New Materials Under the ASME Boiler and Pressure Vessel Code in Section II, Parts Cand D for additional requirements for requests involving adding new materials to the Code. Technical inquiries includerequests for revisions or additions to the Code rules, requests for Code Cases, and requests for Code Interpretations, asdescribed below.

(1) Code Revisions. Code revisions are considered to accommodate technological developments, address administra-tive requirements, incorporate Code Cases, or to clarify Code intent.

(2) Code Cases. Code Cases represent alternatives or additions to existing Code rules. Code Cases are written as aquestion and reply, and are usually intended to be incorporated into the Code at a later date. When used, Code Casesprescribe mandatory requirements in the same sense as the text of the Code. However, users are cautioned that notall jurisdictions or owners automatically accept Code Cases. The most common applications for Code Cases are:

(-a) to permit early implementation of an approved Code revision based on an urgent need

(-b) to permit the use of a new material for Code construction

(-c) to gain experience with new materials or alternative rules prior to incorporation directly into the Code

(3) Code Interpretations. Code Interpretations provide clarification of the meaning of existing rules in the Code, andare also presented in question and reply format. Interpretations do not introduce new requirements. In cases whereexisting Code text does not fully convey the meaning that was intended, and revision of the rules is required to supportan interpretation, an Intent Interpretation will be issued and the Code will be revised.

(b) The Code rules, Code Cases, and Code Interpretations established by the committees are not to be considered asapproving, recommending, certifying, or endorsing any proprietary or specific design, or as limiting in any way the free-dom of manufacturers, constructors, or owners to choose any method of design or any form of construction that con-forms to the Code rules.

(c) Inquiries that do not comply with these provisions or that do not provide sufficient information for a committee’sfull understanding may result in the request being returned to the inquirer with no action.

2 INQUIRY FORMAT

Submittals to a committee shall include:

(a) Purpose. Specify one of the following:

(1) revision of present Code rules

(2) new or additional Code rules

(3) Code Case

(4) Code Interpretation

(b) Background. Provide the information needed for the committee’s understanding of the inquiry, being sure to in-clude reference to the applicable Code Section, Division, edition, addenda (if applicable), paragraphs, figures, and tables.Preferably, provide a copy of the specific referenced portions of the Code.

(c) Presentations. The inquirer may desire or be asked to attend a meeting of the committee to make a formal presen-tation or to answer questions from the committee members with regard to the inquiry. Attendance at a committee meet-ing shall be at the expense of the inquirer. The inquirer’s attendance or lack of attendance at a meeting shall not be abasis for acceptance or rejection of the inquiry by the committee.

x

3 CODE REVISIONS OR ADDITIONS

Requests for Code revisions or additions shall provide the following:(a) Proposed Revisions or Additions. For revisions, identify the rules of the Code that require revision and submit a copy

of the appropriate rules as they appear in the Code, marked up with the proposed revision. For additions, provide therecommended wording referenced to the existing Code rules.

(b) Statement of Need. Provide a brief explanation of the need for the revision or addition.(c) Background Information. Provide background information to support the revision or addition, including any data

or changes in technology that form the basis for the request that will allow the committee to adequately evaluate theproposed revision or addition. Sketches, tables, figures, and graphs should be submitted as appropriate. When applic-able, identify any pertinent paragraph in the Code that would be affected by the revision or addition and identify para-graphs in the Code that reference the paragraphs that are to be revised or added.

4 CODE CASES

Requests for Code Cases shall provide a Statement of Need and Background Information similar to that defined in 3(b)and 3(c), respectively, for Code revisions or additions. The urgency of the Code Case (e.g., project underway or imminent,new procedure, etc.) must be defined and it must be confirmed that the request is in connection with equipment that willbear the Certification Mark, with the exception of Section XI applications. The proposed Code Case should identify theCode Section and Division, and be written as a Question and a Reply in the same format as existing Code Cases. Requestsfor Code Cases should also indicate the applicable Code editions and addenda (if applicable) to which the proposed CodeCase applies.

5 CODE INTERPRETATIONS

(a) Requests for Code Interpretations shall provide the following:(1) Inquiry. Provide a condensed and precise question, omitting superfluous background information and, when

possible, composed in such a way that a “yes” or a “no” Reply, with brief provisos if needed, is acceptable. The questionshould be technically and editorially correct.

(2) Reply. Provide a proposed Reply that will clearly and concisely answer the Inquiry question. Preferably, the Replyshould be “yes” or “no,” with brief provisos if needed.

(3) Background Information. Provide any background information that will assist the committee in understandingthe proposed Inquiry and Reply.

(b) Requests for Code Interpretations must be limited to an interpretation of a particular requirement in the Code or aCode Case. The committee cannot consider consulting type requests such as the following:

(1) a review of calculations, design drawings, welding qualifications, or descriptions of equipment or parts to de-termine compliance with Code requirements;

(2) a request for assistance in performing any Code-prescribed functions relating to, but not limited to, materialselection, designs, calculations, fabrication, inspection, pressure testing, or installation;

(3) a request seeking the rationale for Code requirements.

6 SUBMITTALS

Submittals to and responses from the committees shall meet the following:(a) Submittal. Inquiries from Code users shall be in English and preferably be submitted in typewritten form; however,

legible handwritten inquiries will also be considered. They shall include the name, address, telephone number, fax num-ber, and e-mail address, if available, of the inquirer and be mailed to the following address:

SecretaryASME Boiler and Pressure Vessel CommitteeTwo Park AvenueNew York, NY 10016-5990As an alternative, inquiries may be submitted via e-mail to: SecretaryBPV@asme.org or via our online tool at

http://go.asme.org/InterpretationRequest.(b) Response. The Secretary of the appropriate committee shall acknowledge receipt of each properly prepared in-

quiry and shall provide a written response to the inquirer upon completion of the requested action by the committee.

xi

ð15Þ PERSONNELASME Boiler and Pressure Vessel Standards Committees,

Subgroups, and Working GroupsJanuary 1, 2015

TECHNICAL OVERSIGHT MANAGEMENT COMMITTEE (TOMC)

T. P. Pastor, ChairR. W. Barnes, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryR. J. BasileJ. E. BateyT. L. BedeauxD. L. BergerD. A. CanonicoA. ChaudouetD. B. DeMichaelR. P. DeublerP. D. EdwardsJ. G. FeldsteinR. E. GimpleM. GoldT. E. HansenG. W. Hembree

J. F. HenryR. S. Hill IIIG. G. KarcherW. M. LundyJ. R. MacKayW. E. NorrisG. C. ParkM. D. RanaR. F. Reedy, Sr.B. W. RobertsS. C. RobertsF. J. Schaaf, Jr.A. SelzB. F. ShelleyW. J. SperkoR. W. SwayneC. Withers

HONORARY MEMBERS (MAIN COMMITTEE)

F. P. BartonR. J. CepluchT. M. CullenW. D. DotyG. E. FeigelO. F. HeddenM. H. Jawad

A. J. JustinW. G. KnechtJ. LeCoffT. G. McCartyG. C. MillmanR. A. MoenR. F. Reedy, Sr.

ADMINISTRATIVE COMMITTEE

T. P. Pastor, ChairR. W. Barnes, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryR. J. BasileJ. E. BateyT. L. BedeauxD. L. Berger

J. F. Henry

R. S. Hill III

G. C. Park

M. D. Rana

B. F. Shelley

W. J. Sperko

MARINE CONFERENCE GROUP

J. G. Hungerbuhler, Jr.G. Nair

N. ProkopukJ. D. Reynolds

CONFERENCE COMMITTEE

D. A. Douin — Ohio, SecretaryM. J. Adams — Ontario, CanadaJ. T. Amato — MinnesotaB. P. Anthony — Rhode IslandR. D. Austin — ArizonaR. J. Brockman — MissouriM. A. Burns — FloridaJ. H. Burpee — MaineC. B. Cantrell — NebraskaD. C. Cook — CaliforniaB. J. Crawford — GeorgiaE. L. Creaser — New Brunswick,Canada

J. J. Dacanay — HawaiiC. Dautrich — North DakotaP. L. Dodge— Nova Scotia, CanadaD. Eastman — Newfoundland andLabrador, Canada

J. J. Esch — DelawareC. Fulton — AlaskaR. J. Handy — KentuckyD. R. Hannon — ArkansasE. S. Kawa — MassachusettsJ. C. Klug — WisconsinM. Kotb — Quebec, CanadaT. C. Hellman — OklahomaE. G. Hilton — VirginiaD. T. Jagger — OhioK. J. Kraft — MarylandL. C. Leet — WashingtonA. M. Lorimor — South DakotaM. Mailman — NorthwestTerritories, Canada

D. E. Mallory — New HampshireW. McGivney — New YorkU. Merkle — IowaM. S. Moore — MichiganS. V. Nelson — ColoradoC. C. Novak — IllinoisT. Oda — WashingtonR. P. Pate — AlabamaM. K. Perdue — OregonM. Poehlmann — Alberta, CanadaJ. F. Porcella — West VirginiaA. Pratt — ConnecticutC. F. Reyes — CaliforniaM. J. Ryan — IllinoisM. H. Sansone — New YorkT. S. Scholl — British Columbia,Canada

G. L. Schultz — NevadaT. S. Seine — North DakotaC. S. Selinger — Saskatchewan,Canada

D. Slater — Manitoba, CanadaN. Smith — PennsylvaniaR. Spiker — North CarolinaR. K. Sturm — UtahS. R. Townsend — Prince EdwardIsland, Canada

R. D. Troutt — TexasM. J. Verhagen — WisconsinM. Washington — New JerseyK. L. Watson — MississippiC. J. Wilson III — Kansas

INTERNATIONAL INTEREST REVIEW GROUP

V. FelixY.-G. KimS. H. LeongW. LinO. F. Manafa

C. MinuT. S. G. NarayannenY.-W. ParkR. ReynagaP. Williamson

xii

COMMITTEE ON POWER BOILERS (BPV I)

D. L. Berger, ChairR. E. McLaughlin, Vice ChairU. D'Urso, Staff SecretaryJ. L. ArnoldS. W. CameronD. A. CanonicoK. K. ColemanP. D. EdwardsP. FalloueyJ. G. FeldsteinG. W. GalanesT. E. HansenJ. F. HenryJ. S. HunterW. L. LowryF. Massi

L. MoedingerP. A. MolvieY. OishiE. M. OrtmanJ. T. PillowB. W. RobertsJ. M. TanzoshD. TompkinsD. E. TuttleJ. VattappillyR. V. WielgoszinskiY. Li, DelegateH. Michael, DelegateD. N. French, Honorary MemberT. C. McGough, Honorary MemberR. L. Williams, Honorary Member

Subgroup on Design (BPV I)

J. Vattappilly, ChairD. I. Anderson, SecretaryD. DeweesP. DhorajiaH. A. Fonzi, Jr.J. P. GlaspieG. B. Komora

P. A. Molvie

D. A. Olson

S. V. Torkildson

M. Wadkinson

C. F. Jeerings, Contributing Member

J. C. Light, Contributing Member

Subgroup on Fabrication and Examination (BPV I)

J. T. Pillow, ChairJ. L. Arnold, SecretaryP. BeckerD. L. BergerS. W. CameronS. FincherG. W. GalanesP. F. Gilston

J. Hainsworth

T. E. Hansen

C. T. McDaris

R. E. McLaughlin

R. J. Newell

Y. Oishi

R. V. Wielgoszinski

Subgroup on General Requirements and Piping (BPV I)

T. E. Hansen, ChairE. M. Ortman, Vice ChairF. Massi, SecretaryP. BeckerD. L. BergerP. D. EdwardsG. W. GalanesW. L. LowryR. E. McLaughlin

B. MollitorJ. T. PillowD. TompkinsS. V. TorkildsonD. E. TuttleM. WadkinsonR. V. WielgoszinskiC. F. Jeerings, Contributing MemberR. Uebel, Contributing Member

Subgroup on Heat Recovery Steam Generators (BPV I)

S. V. Torkildson, ChairJ. L. ArnoldJ. P. BellB. G. CarsonJ. GertzT. E. Hansen

G. B. KomoraC. T. McDarisY. OishiE. M. OrtmanD. TompkinsB. C. Turczynski

Subgroup on Locomotive Boilers (BPV I)

L. Moedinger, ChairS. M. Butler, SecretaryP. BoschanJ. BraunR. C. Franzen, Jr.D. W. GrinerS. D. JacksonM. A. Janssen

S. A. Lee

G. M. Ray

J. E. Rimmasch

R. B. Stone

M. W. Westland

R. Yuill

R. D. Reetz, Contributing Member

Subgroup on Materials (BPV I)

G. W. Galanes, ChairK. K. Coleman, Vice ChairJ. S. Hunter, SecretaryS. H. BowesD. A. CanonicoP. FalloueyK. L. HayesJ. F. Henry

M. Lewis

O. X. Li

F. Masuyama

D. W. Rahoi

B. W. Roberts

J. M. Tanzosh

J. Vattappilly

Subgroup on Solar Boilers (BPV I)

J. S. Hunter, ChairS. V. Torkildson, SecretaryG. W. GalanesR. E. HearneP. Jennings

D. J. KozaF. MassiE. M. OrtmanM. J. SlaterJ. C. Light, Contributing Member

India International Working Group (BPV I)

H. DalalI. KalyanasundaramS. MathurA. J. PatilA. R. PatilG. V. S. Rao

U. Revisanakaran

N. Satheesan

G. U. Shanker

D. Shrivastava

S. Venkataramana

Task Group on Modernization of BPVC Section I

D. I. Anderson, ChairU. D’Urso, Staff SecretaryJ. L. ArnoldS. W. CameronD. DeweesG. W. GalanesJ. P. GlaspieT. E. Hansen

J. F. HenryR. E. McLaughlinP. A. MolvieE. M. OrtmanJ. T. PillowB. W. RobertsD. E. TuttleJ. Vattappilly

xiii

COMMITTEE ON MATERIALS (BPV II)

J. F. Henry, ChairD. W. Rahoi, Vice ChairN. Lobo, Staff SecretaryF. AbeA. AppletonJ. CameronD. A. CanonicoA. ChaudouetP. FalloueyJ. R. FouldsD. W. GandyM. H. GilkeyM. GoldJ. F. GrubbJ. A. HallK. M. HottleM. KatcherO. X. LiF. MasuyamaR. K. NanstadB. W. Roberts

E. ShapiroM. J. SlaterR. C. SutherlinR. W. SwindemanJ. M. TanzoshD. TylerO. Oldani, DelegateH. D. Bushfield, ContributingMember

M. L. Nayyar, Contributing MemberE. G. Nisbett, Contributing MemberE. Upitis, Contributing MemberT. M. Cullen, Honorary MemberW. D. Doty, Honorary MemberW. D. Edsall, Honorary MemberG. C. Hsu, Honorary MemberR. A. Moen, Honorary MemberC. E. Spaeder, Jr., HonoraryMember

A. W. Zeuthen, Honorary Member

Executive Committee (BPV II)

J. F. Henry, ChairD. W. Rahoi, Vice ChairN. Lobo, Staff SecretaryA. AppletonA. ChaudouetJ. R. FouldsM. Gold

J. F. Grubb

R. W. Mikitka

B. W. Roberts

R. C. Sutherlin

R. W. Swindeman

J. M. Tanosh

Subgroup on External Pressure (BPV II)

R. W. Mikitka, ChairD. L. Kurle, Vice ChairJ. A. A. Morrow, SecretaryL. F. CampbellH. ChenD. S. GriffinJ. F. Grubb

J. R. Harris IIIM. H. JawadC. R. ThomasM. WadkinsonM. Katcher, Contributing MemberC. H. Sturgeon, ContributingMember

Subgroup on Ferrous Specifications (BPV II)

A. Appleton, ChairK. M. Hottle, Vice ChairP. Wittenbach, SecretaryH. ChenB. M. DingmanM. J. DosdourianP. FalloueyJ. D. FritzT. GrahamJ. M. GrockiJ. F. GrubbC. Hyde

D. S. Janikowski

L. J. Lavezzi

S. G. Lee

W. C. Mack

A. S. Melilli

K. E. Orie

J. Shick

E. Upitis

J. D. Wilson

R. Zawierucha

E. G. Nisbett, Contributing Member

Subgroup on International Material Specifications (BPV II)

A. Chaudouet, ChairO. X. Li, Vice ChairT. F. Miskell, SecretaryS. W. CameronD. A. CanonicoH. ChenP. FalloueyA. F. GarbolevskyD. O. Henry

M. Ishikawa

W. M. Lundy

A. R. Nywening

E. Upitis

F. Zeller

D. Kwon, Delegate

O. Oldani, Delegate

H. Lorenz, Contributing Member

Subgroup on Nonferrous Alloys (BPV II)

R. C. Sutherlin, ChairM. H. Gilkey, Vice ChairH. AnadaJ. CallandD. B. DenisJ. F. GrubbA. HeinoM. KatcherJ. A. McMasterL. Paul

D. W. RahoiW. RenE. ShapiroM. H. SkillingbergD. TylerJ. WeritzR. WrightR. ZawieruchaW. R. Apblett, Jr., ContributingMember

Subgroup on Physical Properties (BPV II)

J. F. Grubb, ChairH. D. BushfieldD. B. Denis

P. FalloueyE. Shapiro

Subgroup on Strength, Ferrous Alloys (BPV II)

J. M. Tanzosh, ChairM. J. Slater, SecretaryF. AbeH. AnadaD. A. CanonicoA. Di RienzoP. FalloueyJ. R. FouldsM. GoldJ. A. HallJ. F. HenryK. Kimura

S. W. KnowlesF. MasuyamaC. PearceD. W. RahoiB. W. RobertsM. S. SheltonJ. P. ShingledeckerR. W. SwindemanW. R. Apblett, Jr., ContributingMember

H. Murakami, ContributingMember

Subgroup on Strength of Weldments (BPV II & BPV IX)

W. F. Newell, Jr., ChairS. H. BowesK. K. ColemanP. D. FlennerJ. R. FouldsD. W. GandyM. GoldK. L. Hayes

J. F. HenryJ. PensoD. W. RahoiB. W. RobertsJ. P. ShingledeckerW. J. SperkoJ. P. Swezy, Jr.J. M. Tanzosh

Working Group on Materials Database (BPV II)

R. W. Swindeman, ChairN. Lobo, Staff SecretaryF. AbeJ. R. FouldsJ. F. HenryM. KatcherB. W. Roberts

R. C. SutherlinD. Andrei, Contributing MemberJ. L. Arnold, Contributing MemberW. Hoffelner, Contributing MemberT. Lazar, Contributing MemberD. T. Peters, Contributing MemberW. Ren, Contributing Member

xiv

Working Group on Creep Strength Enhanced Ferritic Steels (BPV II)

J. F. Henry, ChairF. AbeS. H. BowesD. A. CanonicoK. K. ColemanG. CuminoP. D. FlennerJ. R. FouldsD. W. Gandy

M. Gold

F. Masuyama

W. F. Newell, Jr.

B. W. Roberts

W. J. Sperko

R. W. Swindeman

J. M. Tanzosh

R. G. Young

Working Group on Data Analysis (BPV II)

J. R. Foulds, ChairF. AbeM. GoldJ. F. GrubbJ. F. HenryM. Katcher

F. MasuyamaW. RenB. W. RobertsM. SubanovicM. J. SwindemanR. W. Swindeman

China International Working Group (BPV II)

B. Shou, ChairYong Zhang, Vice ChairX. Tong, SecretaryW. FangQ. C. FengS. HuoH. LiJ. LiS. LiZ. RongcanS. TanC. Wang

X. Wang

F. Yang

G. Yang

R. Ye

L. Yin

H. Zhang

X.-H. Zhang

Yingkai Zhang

Q. Zhao

S. Zhao

J. Zou

COMMITTEE ON CONSTRUCTION OF NUCLEAR FACILITYCOMPONENTS (BPV III)

R. S. Hill III, ChairR. B. Keating, Vice ChairJ. C. Minichiello, Vice ChairA. Byk, Staff SecretaryT. M. AdamsA. AppletonR. W. BarnesW. H. BorterC. W. BrunyT. D. BurchellJ. R. ColeR. P. DeublerA. C. EberhardtB. A. ErlerG. M. FosterW. HoffelnerR. M. JesseeR. I. JetterC. C. KimG. H. KooV. KostarevK. A. ManolyD. E. Matthews

R. P. McIntyreM. N. MitchellM. MorishitaD. K. MortonT. NagataR. F. Reedy, Sr.I. SaitoC. T. SmithW. K. Sowder, Jr.W. J. SperkoK. R. WichmanC. S. WithersY. H. Choi, DelegateT. Ius, DelegateH.-T. Wang, DelegateM. Zhou, Contributing MemberE. B. Branch, Honorary MemberG. D. Cooper, Honorary MemberW. D. Doty, Honorary MemberD. F. Landers, Honorary MemberR. A. Moen, Honorary MemberC. J. Pieper, Honorary Member

Subcommittee on Design (BPV III)

R. P. Deubler, ChairD. E. Matthews, Vice ChairG. L. Hollinger, SecretaryT. M. AdamsG. A. AntakiR. L. BrattonC. W. BrunyP. R. DonavinR. S. Hill IIIP. HirschbergM. H. JawadR. I. Jetter

R. B. Keating

R. A. Ladefian

K. A. Manoly

R. J. Masterson

M. N. Mitchell

W. J. O’Donnell, Sr.E. L. Pleins

T.-L. Sham

J. P. Tucker

K. Wright

J. Yang

Subgroup on Component Design (SC-D) (BPV III)

T. M. Adams, ChairR. B. Keating, Vice ChairS. Pellet, SecretaryG. A. AntakiS. AsadaJ. F. BallJ. R. ColeR. P. DeublerP. HirschbergH. KobayashiR. A. LadefianK. A. ManolyR. J. MastersonD. E. MatthewsJ. C. MinichielloD. K. Morton

T. M. MustoT. NagataA. N. NguyenE. L. PleinsI. SaitoG. C. SlagisJ. R. StinsonG. Z. TokarskiJ. P. TuckerP. VockK. R. WichmanC. WilsonJ. YangC. W. Bruny, Contributing MemberA. A. Dermenjian, ContributingMember

Working Group on Core Support Structures (SG-CD) (BPV III)

J. Yang, ChairJ. F. Kielb, SecretaryL. C. HartlessD. KeckT. LiszkaiH. S. Mehta

M. Nakajima

M. D. Snyder

A. Tsirigotis

R. Vollmer

J. T. Land, Contributing Member

Working Group on Design of Division 3 Containments(SG-CD) (BPV III)

D. K. Morton, ChairD. J. AmmermanG. BjorkmanG. BrozS. HorowitzD. W. LewisJ. C. Minichiello

E. L. Pleins

C. J. Temus

I. D. McInnes, Contributing Member

R. E. Nickell, Contributing Member

H. P. Shrivastava, ContributingMember

Working Group on HDPE Design of Components (SG-CD) (BPV III)

T. M. Musto, ChairJ. Ossmann, SecretaryT. M. AdamsT. A. BaconC. BasavarajuD. BurwellS. Choi

P. KrishnaswamyM. MartinJ. C. MinichielloD. P. MunsonF. J. Schaaf, Jr.R. StakenborghsH. E. Svetlik

xv

Working Group on Piping (SG-CD) (BPV III)

G. A. Antaki, ChairG. Z. Tokarski, SecretaryT. M. AdamsT. A. BaconC. BasavarajuJ. CatalanoF. ClaeysJ. R. ColeC. M. FaidyR. G. GiladaN. M. GrahamM. A. GrayR. W. HauptA. HiranoP. HirschbergM. KassarJ. Kawahata

R. B. KeatingV. KostarevY. LiuJ. F. McCabeJ. C. MinichielloI.-K. NamA. N. NguyenM. S. SillsG. C. SlagisN. C. SutherlandE. A. WaisC.-I. WuJ. J. Martinez, Contributing MemberN. J. Shah, Contributing MemberE. C. Rodabaugh, HonoraryMember

Working Group on Pressure Relief (SG-CD) (BPV III)

J. F. Ball, ChairA. L. Szeglin

D. G. Thibault

Working Group on Pumps (SG-CD) (BPV III)

R. A. Ladefian, ChairP. W. BehnkeR. E. Cornman, Jr.M. D. EftychiouA. FraserM. A. GaydonR. Ghanbari

M. Higuchi

S. Mauvais

R. A. Patrick

J. Sulley

R. Udo

A. G. Washburn

Working Group on Supports (SG-CD) (BPV III)

J. R. Stinson, ChairU. S. Bandyopadhyay, SecretaryK. AvrithiT. H. BakerF. J. BirchR. P. DeublerN. M. GrahamR. J. Masterson

S. PelletI. SaitoH. P. ShrivastavaC. StirzelT. G. TerryahG. Z. TokarskiP. WisemanC.-I. Wu

Working Group on Valves (SG-CD) (BPV III)

P. Vock, ChairJ. O'Callaghan, SecretaryM. C. BuckleyG. A. JollyJ. KleinT. A. McMahon

C. A. MizerK. E. Reid IIH. R. SondereggerJ. SullyI. TsengJ. P. Tucker

Working Group on Vessels (SG-CD) (BPV III)

D. E. Matthews, ChairR. M. Wilson, SecretaryC. BasavarajuJ. V. Gregg, Jr.W. J. HeilkerA. KalninsR. B. KeatingD. KeckJ. KimO.-S. Kim

K. Matsunaga

M. C. Scott

P. K. Shah

J. Shupert

C. Turylo

D. Vlaicu

W. F. Weitze

T. Yamazaki

R. Z. Ziegler

Subgroup on Design Methods (SC-D) (BPV III)

C. W. Bruny, ChairS. McKillop, SecretaryK. AvrithiW. CulpP. R. Donavin, Jr.J. V. Gregg, Jr.H. T. Harrison IIIK. HsuM. Kassar

D. KeckM. N. MitchellW. J. O’Donnell, Sr.P. J. O’ReganW. D. ReinhardtP. SmithS. D. SnowW. F. WeitzeK. Wright

Working Group on Design Methodology (SG-DM) (BPV III)

S. D. Snow, ChairM. R. Breach, SecretaryK. AvrithiC. BasavarajuR. D. BlevinsD. L. CaldwellD. DeweesC. M. FaidyH. T. Harrison IIIP. HirschbergM. KassarR. B. KeatingJ. KimH. Kobayashi

T. LiszkaiJ. F. McCabeA. N. NguyenW. D. ReinhardtD. H. RoartyP. K. ShahR. VollmerS. WangT. M. WigerK. WrightJ. YangM. K. Au-Yang, ContributingMember

Working Group on Environmental Effects (SG-DM) (BPV III)

W. Culp, ChairB. D. Frew, SecretaryK. AvrithiP. J. DobsonW. J. Heilker

C. JonkerJ. E. NestellT. SchrieferM. S. SheltonY. H. Choi, Delegate

Working Group on Environmental Fatigue Evaluation Methods(SG-DM) (BPV III)

K. Wright, ChairM. A. Gray, Vice ChairW. F. Weitze, SecretaryT. M. AdamsS. AsadaK. AvrithiR. C. CipollaJ. R. ColeT. M. DamianiC. M. Faidy

T. D. GilmanS. R. GosselinY. HeP. HirschbergH. S. MehtaJ.-S. ParkD. H. RoartyI. SaitoD. VlaicuR. Z. Ziegler

Working Group on Fatigue Strength (SG-DM) (BPV III)

P. R. Donavin, ChairT. M. DamianiD. DeweesC. M. FaidyS. R. GosselinR. J. GurdalC. F. Heberling IIC. E. HinnantP. HirschbergK. HsuS. H. KleinsmithS. Majumdar

S. N. Malik

D. H. Roarty

M. S. Shelton

G. Taxacher

A. Tsirigotis

K. Wright

H. H. Ziada

G. S. Chakrabarti, ContributingMember

W. J. O'Donnell, Sr., ContributingMember

xvi

Working Group on Graphite and Composites Design(SG-DM) (BPV III)

M. N. Mitchell, ChairM. W. Davies, Vice ChairC. A. Sanna, Staff SecretaryT. D. Burchell, SecretaryA. AppletonR. L. BrattonS. CadellS.-H. ChiA. CovacS. W. Doms

S. F. Duffy

S. T. Gonczy

Y. Katoh

J. Ossmann

M. Roemmler

N. Salstrom

T. Shibata

S. Yu

G. L. Zeng

Working Group on Probabilistic Methods in Design(SG-DM) (BPV III)

P. J. O'Regan, ChairM. Golliet, SecretaryT. AsayamaK. AvrithiM. R. Graybeal

D. O. HenryR. S. Hill IIIM. MorishitaN. A. PalmI. Saito

Special Working Group on Computational Modeling for ExplicitDynamics (SG-DM) (BPV III)

G. Bjorkman, ChairD. J. Ammerman, SecretaryM. R. BreachG. BrozJ. JordanD. MolitorisJ. Piotter

W. D. Reinhardt

P. Y.-K. Shih

S. D. Snow

C.-F. Tso

M. C. Yaksh

U. Zencker

Subgroup on Elevated Temperature Design (SC-D) (BPV III)

T.-L. Sham, ChairT. AsayamaC. Becht IVF. W. BrustP. CarterJ. F. CervenkaB. F. HantzW. HoffelnerA. B. HullM. H. JawadR. I. Jetter

G. H. Koo

M. Li

S. Majumdar

J. E. Nestell

W. J. O'Donnell, Sr.

R. W. Swindeman

D. S. Griffin, Contributing Member

W. J. Koves, Contributing Member

D. L. Marriott, ContributingMember

Working Group on Allowable Stress Criteria (SG-ETD) (BPV III)

R. W. Swindeman, ChairR. Wright, SecretaryJ. R. FouldsK. KimuraM. LiS. N. Malik

J. E. Nestell

W. Ren

B. W. Roberts

M. Sengupta

T.-I. Sham

Working Group on Analysis Methods (SG-ETD) (BPV III)

P. Carter, ChairM. J. Swindeman, SecretaryM. AndoM. R. Breach

R. I. JetterS. KrishnamurthyT.-I. ShamD. K. Williams

Working Group on Creep-Fatigue and Negligible Creep (SG-ETD)(BPV III)

T. Asayama, ChairM. Li, SecretaryF. W. BrustP. CarterR. I. Jetter

G. H. KooB.-L. LyowS. N. MalikH. QianT.-I. Sham

Working Group on Elevated Temperature Construction (SG-ETD)(BPV III)

M. H. Jawad, ChairB. Mollitor, SecretaryD. I. AndersonR. G. BrownD. DeweesJ. P. GlaspieB. F. Hantz

G. L. HollingerR. I. JetterS. KrishnamurthyA. MannD. L. MarriottM. N. MitchellC. Nadarajah

Working Group on High Temperature Flaw Evaluation (SG-ETD)(BPV III)

F. W. Brust, ChairN. BroomP. CarterW. HoffelnerS. N. Malik

D. L. RudlandP. J. RushD.-J. ShimS. X. Xu

Subgroup on General Requirements (BPV III)

R. P. McIntyre, ChairL. M. Plante, SecretaryV. ApostolescuA. AppletonS. BellJ. R. BerryB. K. BoboJ. DeKleineJ. V. GardinerG. GrattiJ. W. HighlandsG. V. ImbroK. A. Kavanagh

Y.-S. KimM. R. MinickE. C. RenaudD. J. RoszmanC. T. SmithW. K. Sowder, Jr.G. E. SzabaturaT. G. TerryahD. M. VickeryC. S. WithersH. Michael, DelegateG. L. Hollinger, ContributingMember

Working Group on Duties and Responsibilities (SG-GR) (BPV III)

J. V. Gardiner, ChairG. L. Hollinger, SecretaryS. BellJ. R. BerryJ. DeKleineN. DeSantisY. Diaz-CastilloE. L. Farrow

G. Gratti

B. N. Juarez

K. A. Kavanagh

J. M. Lyons

L. M. Plante

D. J. Roszman

T. G. Terryah

xvii

Working Group on Quality Assurance, Certification, and Stamping(SG-GR) (BPV III)

C. T. Smith, ChairC. S. Withers, SecretaryV. ApostolescuA. AppletonB. K. BoboS. M. GoodwinJ. GrimmJ. W. HighlandsY.-S. KimB. McGloneR. P. McIntyre

M. R. Minick

R. B. Patel

E. C. Renaud

T. Rezk

J. Rogers

W. K. Sowder, Jr.

J. F. Strunk

G. E. Szabatura

D. M. Vickery

C. A. Spletter, Contributing Member

Special Working Group on General Requirements Consolidation(SG-GR) (BPV III)

J. V. Gardiner, ChairC. T. Smith, Vice ChairS. BellM. CusickY. Diaz-CastilloJ. GrimmJ. M. LyonsM. McGloneR. PatelE. C. Renaud

T. RezkJ. RogersD. J. RoszmanB. S. SandhuG. J. SoloveyR. SpuhlG. E. SzabaturaC. S. WithersS. F. Harrison, ContributingMember

Subgroup on Materials, Fabrication, and Examination (BPV III)

R. M. Jessee, ChairB. D. Frew, Vice ChairS. Hunter, SecretaryW. H. BorterT. D. BurchellG. R. CannellR. H. DavisG. M. FosterG. B. GeorgievS. E. GingrichM. GollietJ. GrimmJ. Johnston, Jr.C. C. KimM. Lashley

T. MelfiH. MurakamiJ. OssmannJ. E. O’SullivanC. PearceN. M. SimpsonW. J. SperkoJ. R. StinsonJ. F. StrunkK. B. StuckeyR. WrightS. YeeH. Michael, DelegateR. W. Barnes, Contributing Member

Working Group on Graphite and Composite Materials (SG-MFE)(BPV III)

T. D. Burchell, ChairA. AppletonR. L. BrattonS. CadellS.-H. ChiA. CovacM. W. DaviesS. W. DomsS. F. DuffyS. T. Gonzcy

M. G. Jenkins

Y. Katoh

M. N. Mitchell

J. Ossmann

M. Roemmler

N. Salstrom

T. Shibata

S. Yu

G. L. Zeng

Working Group on HDPE Materials (SG-MFE) (BPV III)

M. Golliet, ChairM. A. Martin, SecretaryW. H. BorterM. C. BuckleyE. M. FochtB. HaugerJ. Johnston, Jr.P. Krishnaswamy

E. W. McElroyT. M. MustoS. PattersonS. SchuesslerR. StakenborghsT. TiptonM. TroughtonZ. J. Zhou

Joint ACI-ASME Committee on Concrete Components for NuclearService (BPV III)

A. C. Eberhardt, ChairC. T. Smith, Vice ChairA. Byk, Staff SecretaryJ. F. ArtusoC. J. BangF. FarzamP. S. GhosalB. D. HovisT. C. InmanO. JovallN.-H. LeeJ. McLeanJ. MunshiN. OrbovicJ. F. Strunk

T. TonyanT. J. Ahl, Contributing MemberN. Alchaar, Contributing MemberB. A. Erler, Contributing MemberJ. Gutierrez, Contributing MemberM. F. Hessheimer, ContributingMember

T. E. Johnson, ContributingMember

T. Muraki, Contributing MemberB. B. Scott, Contributing MemberM. R. Senecal, ContributingMember

M. K. Thumm, ContributingMember

Working Group on Design (BPV III-2)

J. Munshi, ChairN. AlchaarM. AllamS. BaeL. J. ColarussoA. C. EberhardtF. FarzamP. S. GhosalB. D. HovisT. C. InmanO. JovallN.-H. Lee

M. Diaz, Contributing Member

S. Diaz, Contributing Member

M. F. Hessheimer, ContributingMember

A. Istar, Contributing Member

T. E. Johnson, ContributingMember

B. R. Laskewitz, ContributingMember

Z. Shang, Contributing Member

M. Sircar, Contributing Member

Working Group on Materials, Fabrication, and Examination(BPV III-2)

P. S. Ghosal, ChairT. Tonyan, Vice ChairM. AllamJ. F. ArtusoJ.-B. DomageA. C. EberhardtC. Jones

C. T. Smith

J. F. Strunk

D. Ufuk

J. Gutierrez, Contributing Member

B. B. Scott, Contributing Member

Z. Shang, Contributing Member

Special Working Group on Modernization (BPV III-2)

J. McLean, ChairN. Orbovic, Vice ChairA. AdediranN. AlchaarO. JovallC. T. Smith

M. A. Ugalde

S. Wang

S. Diaz, Contributing Member

J.-B. Domage, Contributing Member

U. Ricklefs, Contributing Member

xviii

Subgroup on Containment Systems for Spent Fuel and High-LevelWaste Transport Packagings (BPV III)

D. K. Morton, ChairG. M. Foster, Vice ChairG. R. Cannell, SecretaryG. AbramczykD. J. AmmermanG. BjorkmanS. HorowitzD. W. LewisP. E. McConnellR. E. NickellE. L. Pleins

R. H. Smith

G. J. Solovey

C. J. Temus

W. H. Borter, Contributing Member

R. S. Hill III, Contributing Member

A. B. Meichler, ContributingMember

T. Saegusa, Contributing Member

N. M. Simpson, ContributingMember

Subgroup on Fusion Energy Devices (BPV III)

W. K. Sowder, Jr., ChairD. Andrei, Staff SecretaryD. J. Roszman, SecretaryR. W. BarnesB. R. DoshiM. HiguchiG. HoltmeierM. KalseyK. A. KavanaghH. J. KimK. Kim

I. KimihiroS. LeeG. LiX. LiP. MokariaT. R. MuldoonM. PortonY. SongM. TrosenC. WaldonI. J. Zatz

Working Group on General Requirements (BPV III-4)

W. K. Sowder, Jr., Chair

Working Group on In-Vessel Components (BPV III-4)

M. Kalsey, Chair

Working Group on Magnets (BPV III-4)

K. Kim, Chair

Working Group on Materials (BPV III-4)

M. Porton, Chair

Working Group on Vacuum Vessels (BPV III-4)

I. Kimihiro, Chair B. R. Doshi

Subgroup on High Temperature Reactors (BPV III)

M. Morishita, ChairR. I. Jetter, Vice ChairT.-L. Sham, SecretaryN. BroomT. D. BurchellW. Hoffelner

G.-H. KooD. K. MortonJ. E. NestellN. N. RayX. Li, Contributing MemberL. Shi, Contributing Member

Working Group on High Temperature Gas-Cooled Reactors(BPV III-5)

J. E. Nestell, ChairM. Sengupta, SecretaryN. BroomT. D. BurchellR. S. Hill IIIE. V. ImbroR. I. JetterY. W. Kim

T. R. Lupold

S. N. Malik

D. L. Marriott

D. K. Morton

T.-L. Sham

X. Li, Contributing Member

L. Shi, Contributing Member

Working Group on High Temperature Liquid-Cooled Reactors(BPV III-5)

T.-L. Sham, ChairT. Asayama, SecretaryM. ArcaroR. W. BarnesP. CarterM. E. CohenA. B. HullR. I. Jetter

G. H. Koo

M. Li

S. Majumdar

M. Morishita

J. E. Nestell

X. Li, Contributing Member

G. Wu, Contributing Member

Executive Committee (BPV III)

R. S. Hill III, ChairA. Byk, Staff SecretaryT. M. AdamsC. W. BrunyR. P. DeublerA. C. EberhardtR. M. JesseeR. B. Keating

R. P. McIntyre

J. C. Minichiello

M. Morishita

D. K. Morton

C. A. Sanna

T.-L. Sham

W. K. Sowder, Jr.

China International Working Group (BPV III)

J. Yan, ChairW. Tang, Vice ChairC. A. Sanna, Staff SecretaryY. He, SecretaryH. GeZ. HanJ. JianY. JingF. KaiD. KangX. LiY. LiB. LiangH. LinS. LinJ. LiuS. LiuW. LiuK. MaoW. Pei

G. SunG. TangY. TuY. WangH. WuX. WuZ. WuS. XueZ. YanC. YeZ. YinS. ZaozhanG. ZhangK. ZhangW. ZhangG. ZhaoW. ZhaoY. ZhongZ. ZhongG. Zhu

xix

Germany International Working Group (BPV III)

C. Huttner, ChairH.-R. Bath, SecretaryB. ArndtM. BauerG. DaumL. GerstnerG. HaenleK.-H. HerterU. JendrichG. KramarzC. KrumbW. MayingerD. Moehring

D. OstermannG. RoosJ. RudolphC. A. SannaH. SchauC. A. SpletterR. TrieglaffP. VöllmeckeJ. WendtF. WilleM. WinterN. Wirtz

India International Working Group (BPV III)

B. Basu, ChairG. Mathivanan, Vice ChairC. A. Sanna, Staff SecretaryS. B. Parkash, SecretaryV. BhasinP. ChellapandiS. Jalaldeen

D. Kulkarni

S. A. Kumar De

N. M. Nadaph

M. Ponnusamy

R. N. Sen

A. Sundararajan

Korea International Working Group (BPV III)

G. H. Koo, ChairS. S. Hwang, Vice ChairO.-S. Kim, SecretaryH. S. ByunS. ChoiJ.-Y. HongN.-S. HuhJ.-K. HwangC. JangI. I. JeongH. J. KimJ. KimJ.-S. KimK. KimY.-B. KimY.-S. Kim

D. KwonB. LeeD. LeeSanghoon LeeSangil LeeD. J. LimH. LimI.-K. NamB. NohC.-K. OhC. ParkJ.-S. ParkT. ShinS. SongO. Yoo

Special Working Group on Editing and Review (BPV III)

D. K. Morton, ChairR. L. BrattonR. P. DeublerA. C. EberhardtR. I. Jetter

J. C. MinichielloL. M. PlanteR. F. Reedy, Sr.W. K. Sowder, Jr.C. Wilson

Special Working Group on HDPE Stakeholders (BPV III)

D. Burwell, ChairS. Patterson, SecretaryT. M. AdamsS. BruceS. ChoiC. M. FaidyE. M. FochtM. GollietJ. GrimesR. M. JesseeJ. Johnston, Jr.D. Keller

M. LashleyT. R. LupoldK. A. ManolyD. P. MunsonT. M. MustoJ. E. O’SullivanM. A. RichterV. RohatgiF. J. Schaaf, Jr.R. StakenborghsM. TroughtonZ. J. Zhou

Special Working Group on Honors and Awards (BPV III)

R. M. Jessee, ChairA. AppletonR. W. Barnes

J. R. ColeD. E. MatthewsJ. C. Minichiello

Special Working Group on Industry Experience for New Plants(BPV III & BPV XI)

G. M. Foster, ChairJ. T. Lindberg, ChairH. L. Gustin, SecretaryJ. Ossmann, SecretaryT. L. ChanD. R. GrahamP. J. HennesseyD. O. HenryJ. HoncharikE. V. ImbroC. G. KimO.-S. Kim

Y.-S. Kim

K. Matsunaga

D. E. Matthews

R. E. McLaughlin

E. L. Pleins

D. W. Sandusky

D. M. Swann

T. Tsuruta

E. R. Willis

R. M. Wilson

S. M. Yee

Special Working Group on International Meetings (BPV III)

C. T. Smith, ChairA. Byk, Staff SecretaryT. D. BurchellS. W. CameronJ. R. ColeR. L. Crane

G. M. Foster

R. S. Hill III

M. N. Mitchell

R. F. Reedy, Sr.

C. A. Sanna

Special Working Group on New Advanced Light Water Reactor PlantConstruction Issues (BPV III)

E. L. Pleins, ChairM. C. Scott, SecretaryA. CardilloP. J. CocoB. GilliganJ. HoncharikG. V. ImbroO.-S Kim

M. KrisJ. C. MinichielloD. W. SanduskyC. A. SannaR. R. StevensonR. TroficantoM. L. WilsonJ. Yan

Special Working Group on Regulatory Interface (BPV III)

G. V. Imbro, ChairS. Bell, SecretaryA. CardilloA. A. DermenjianB. N. JuarezK. Matsunaga

D. E. MatthewsA. T. Roberts IIIR. R. StevensonD. TeraoM. L. WilsonR. A. Yonekawa

COMMITTEE ON HEATING BOILERS (BPV IV)

T. L. Bedeaux, ChairJ. A. Hall, Vice ChairG. Moino, Staff SecretaryB. CalderonJ. CallandJ. P. ChicoineC. M. DoveA. HeinoB. J. IskeP. A. Molvie

R. E. Olson

M. Wadkinson

R. V. Wielgoszinski

H. Michael, Delegate

D. Picart, Delegate

S. V. Voorhees, ContributingMember

J. L. Kleiss, Alternate

W. L. Haag, Jr., Honorary Member

xx

Subgroup on Care and Operation of Heating Boilers (BPV IV)

M. Wadkinson, ChairT. L. BedeauxJ. Calland

J. A. HallP. A. Molvie

Subgroup on Cast Iron Boilers (BPV IV)

J. P. Chicoine, ChairT. L. Bedeaux, Vice ChairC. M. Dove

J. M. DownsJ. A. HallJ. L. Kleiss

Subgroup on Materials (BPV IV)

J. A. Hall, ChairM. Wadkinson, Vice ChairJ. CallandJ. M. Downs

A. HeinoB. J. IskeJ. L. KleissE. Rightmier

Subgroup on Water Heaters (BPV IV)

J. Calland, ChairJ. P. ChicoineB. J. Iske

R. E. OlsonT. E. Trant

Subgroup on Welded Boilers (BPV IV)

J. Calland, ChairT. L. BedeauxB. CalderonJ. L. Kleiss

P. A. MolvieR. E. OlsonM. WadkinsonR. V. Wielgoszinski

COMMITTEE ON NONDESTRUCTIVE EXAMINATION (BPV V)

G. W. Hembree, ChairF. B. Kovacs, Vice ChairJ. S. Brzuszkiewicz, Staff SecretaryS. J. AkrinC. A. AndersonJ. E. BateyA. S. BirksP. L. BrownM. A. BurnsB. CaccamiseN. Y. FaranssoN. A. FinneyA. F. GarbolevskyJ. F. Halley

J. W. HoufS. A. JohnsonR. W. KruzicC. MayA. B. NagelT. L. PlasekF. J. SattlerG. M. Gatti, DelegateX. Guiping, DelegateB. D. Laite, AlternateH. C. Graber, Honorary MemberO. F. Hedden, Honorary MemberJ. R. MacKay, Honorary MemberT. G. McCarty, Honorary Member

Subgroup on General Requirements/Personnel Qualifications andInquiries (BPV V)

F. B. Kovacs, ChairJ. W. Houf, Vice ChairS. J. AkrinC. A. AndersonJ. E. BateyA. S. BirksC. EmslanderN. Y. Faransso

N. A. Finney

G. W. Hembree

S. A. Johnson

D. I. Morris

A. B. Nagel

J. P. Swezy, Jr., ContributingMember

Special Working Group on NDE Resource Support (SG-GR/PQ & I)(BPV V)

N. A. Finney, ChairD. AdkinsJ. AndersonT. G. BollhalterC. T. BrownN. Carter

J. L. Garner

M. Ghahremani

J. W. Mefford, Jr.

M. Sens

D. Van Allen

Subgroup on Surface Examination Methods (BPV V)

S. A. Johnson, ChairJ. Halley, Vice ChairS. J. AkrinJ. E. BateyA. S. BirksP. L. BrownB. CaccamiseN. Y. FaranssoN. FarenbaughN. A. Finney

G. W. Hembree

R. W. Kruzic

B. D. Laite

C. May

L. E. Mullins

A. B. Nagel

F. J. Sattler

P. Shaw

G. M. Gatti, Delegate

Subgroup on Volumetric Methods (BPV V)

A. B. Nagel, ChairN. A. Finney, Vice ChairS. J. AkrinJ. E. BateyP. L. BrownB. CaccamiseN. Y. FaranssoA. F. GarbolevskyJ. F. HalleyR. W. Hardy

G. W. HembreeS. A. JohnsonF. B. KovacsR. W. KruzicC. MayL. E. MullinsT. L. PlasekF. J. SattlerM. TorokG. M. Gatti, Delegate

Working Group on Acoustic Emissions (SG-VM) (BPV V)

N. Y. Faransso, ChairJ. E. Batey, Vice Chair

S. R. DoctorR. K. Miller

Working Group on Radiography (SG-VM) (BPV V)

B. Caccamise, ChairF. B. Kovacs, Vice ChairS. J. AkrinJ. E. BateyP. L. BrownC. EmslanderN. Y. FaranssoA. F. GarbolevskyR. W. HardyG. W. Hembree

S. A. Johnson

R. W. Kruzic

B. D. Laite

S. Mango

C. May

R. J. Mills

A. B. Nagel

T. L. Plasek

M. Torok

Working Group on Ultrasonics (SG-VM) (BPV V)

N. A. Finney, ChairJ. F. Halley, Vice ChairB. CaccamiseK. J. ChizenJ. M. DavisN. Y. FaranssoP. T. HayesS. A. Johnson

R. W. Kruzic

B. D. Laite

C. May

L. E. Mullins

A. B. Nagel

F. J. Sattler

M. Torok

xxi

Working Group on GuidedWave Ultrasonic Testing (SG-VM) (BPV V)

N. Y. Faransso, ChairJ. E. Batey, Vice ChairD. AlleyneN. AmirJ. F. Halley

S. A. JohnsonG. M. LightP. MudgeM. J. QuarryJ. Vanvelsor

COMMITTEE ON PRESSURE VESSELS (VIII)

R. J. Basile, ChairS. C. Roberts, Vice ChairS. J. Rossi, Staff SecretaryT. Schellens, Staff SecretaryG. Aurioles, Sr.V. BogosianJ. CameronA. ChaudouetD. B. DeMichaelJ. P. GlaspieJ. F. GrubbL. E. Hayden, Jr.G. G. KarcherD. L. KurleK. T. LauM. D. LowerR. MahadeenR. W. MikitkaU. R. MillerT. W. NortonT. P. PastorD. T. PetersM. J. Pischke

M. D. RanaG. B. Rawls, Jr.F. L. RichterC. D. RoderyE. SoltowD. A. SwansonJ. P. Swezy, Jr.S. TeradaE. UpitisP. A. McGowan, DelegateH. Michael, DelegateK. Oyamada, DelegateM. E. Papponetti, DelegateD. Rui, DelegateT. Tahara, DelegateM. Gold, Contributing MemberW. S. Jacobs, Contributing MemberK. Mokhtarian, ContributingMember

C. C. Neely, Contributing MemberA. Selz, Contributing MemberK. K. Tam, Contributing Member

Subgroup on Design (BPV VIII)

D. A. Swanson, ChairJ. C. Sowinski, Vice ChairM. Faulkner, SecretaryG. Aurioles, Sr.S. R. BabkaO. A. BarskyR. J. BasileM. R. BreachF. L. BrownD. ChandiramaniB. F. HantzC. E. HinnantC. S. HinsonM. H. JawadD. L. KurleM. D. LowerR. W. MikitkaU. R. Miller

T. P. PastorM. D. RanaG. B. Rawls, Jr.S. C. RobertsC. D. RoderyD. SrnicJ. VattappillyR. A. WhippleK. XuK. Oyamada, DelegateM. E. Papponetti, DelegateW. S. Jacobs, Contributing MemberP. K. Lam, Contributing MemberK. Mokhtarian, ContributingMember

A. Selz, Contributing MemberS. C. Shah, Contributing MemberK. K. Tam, Contributing Member

Working Group on Design-By-Analysis (BPV III)

B. F. Hantz, ChairT. W. Norton, SecretaryR. G. BrownD. DeweesR. D. DixonZ. GuC. E. HinnantR. JainM. H. Jawad

S. KrishnamurthyA. MannG. A. MillerC. NadarajahM. D. RanaT. G. SeippM. A. ShahS. TeradaD. Arnett, Contributing Member

Subgroup on Fabrication and Inspection (BPV VIII)

C. D. Rodery, ChairJ. P. Swezy, Jr., Vice ChairB. R. Morelock, SecretaryL. F. CampbellD. I. MorrisO. MuletM. J. PischkeM. J. RiceB. F. Shelley

P. L. Sturgill

E. A. Whittle

K. Oyamada, Delegate

W. J. Bees, Contributing Member

W. S. Jacobs, Contributing Member

J. Lee, Contributing Member

R. Uebel, Contributing Member

E. Upitis, Contributing Member

Subgroup on General Requirements (BPV VIII)

M. D. Lower, ChairJ. P. Glaspie, Vice ChairF. L. Richter, SecretaryR. J. BasileV. BogosianD. T. DavisD. B. DeMichaelM. FaulkenerL. E. Hayden, Jr.K. T. Lau

A. S. OlivaresT. P. PastorS. C. RobertsJ. C. SowinskiP. SperanzaD. B. StewartD. A. SwansonR. UebelK. Oyamada, DelegateC. C. Neely, Contributing Member

Task Group on U-2(g) (BPV VIII)

S. R. BabkaR. J. BasileD. K. ChandiramaniR. MahadeenU. R. MillerT. W. NortonT. P. Pastor

R. F. Reedy, Sr.S. C. RobertsM. A. Shah, Jr.D. SrnicD. A. SwansonR. UebelK. K. Tam, Contributing Member

Subgroup on Heat Transfer Equipment (BPV VIII)

G. Aurioles, Sr., ChairP. Matkovics, SecretaryD. AngstadtS. R. BabkaM. BahadoriJ. H. BarbeeO. A. BarskyI. G. CampbellA. ChaudouetM. D. ClarkS. JeyakumarG. G. KarcherD. L. KurleB. J. Lerch

R. MahadeenS. MayeuxU. R. MillerT. W. NortonK. OyamadaD. SrnicA. M. VoytkoR. P. WibergF. E. Jehrio, Contributing MemberJ. Mauritz, Contributing MemberF. Osweiller, Contributing MemberR. Tiwari, Contributing MemberS. Yokell, Contributing MemberS. M. Caldwell, Honorary Member

Task Group on Plate Heat Exchangers (BPV VIII)

M. J. Pischke, ChairS. R. BabkaS. FlynnJ. F. GrubbF. HamtakJ. E. Lane

R. MahadeenP. MetkovicsD. I. MorrisC. M. RomeroE. SoltowD. Srnic

xxii

Subgroup on High Pressure Vessels (BPV VIII)

D. T. Peters, ChairR. D. Dixon, Vice ChairR. T. Hallman, Vice ChairA. P. Maslowski, Staff SecretaryL. P. AntalffyR. C. BielP. N. ChakuR. CordesL. FridlundD. M. FryerA. H. HonzaJ. A. KappJ. KeltjensA. K. KhareN. McKieS. C. Mordre

G. T. NelsonE. A. RodriguezE. D. RollK. C. Simpson, Jr.D. L. StangF. W. TatarS. TeradaJ. L. TraudR. WinkK.-J. YoungK. Oyamada, DelegateR. M. Hoshman, ContributingMember

G. J. Mraz, Contributing MemberD. J. Burns, Honorary MemberE. H. Perez, Honorary Member

Subgroup on Materials (BPV VIII)

J. F. Grubb, ChairJ. Cameron, Vice ChairP. G. Wittenbach, SecretaryA. Di RienzoJ. D. FritzM. KatcherM. KowalczykW. M. LundyJ. PensoD. W. Rahoi

R. C. Sutherlin

E. Upitis

K. Xu

K. Oyamada, Delegate

G. S. Dixit, Contributing Member

M. Gold, Contributing Member

J. A. McMaster, ContributingMember

E. G. Nisbett, Contributing Member

Subgroup on Toughness (BPV II & BPV VIII)

D. L. Kurle, ChairK. Xu, Vice ChairR. J. BasileW. S. JacobsM. D. RanaF. L. RichterK. SubramanianD. A. Swanson

J. P. Swezy, Jr.

E. Upitis

J. Vattappilly

K. Oyamada, Delegate

K. Mokhtarian, ContributingMember

C. C. Neely, Contributing Member

Subgroup on Graphite Pressure Equipment (BPV VIII)

E. Soltow, ChairG. C. BechererT. F. BonnF. L. Brown

M. R. MinickA. A. StupicaA. Viet

Italy International Working Group (BPV VIII)

G. Pontiggia, ChairA. Veroni, SecretaryB. G. AlboraliP. AngeliniR. BoattiA. CamanniP. ContiP. L. DinelliF. FincoL. GaetaniA. Ghidini

M. Guglielmetti

P. Mantovani

M. Maroni

M. Massobrio

L. Moracchioli

L. Possenti

C. Sangaletti

A. Teli

I. Venier

G. Gobbi, Contributing Member

Special Working Group on Bolted Flanged Joints (BPV VIII)

R. W. Mikitka, ChairG. D. BibelW. BrownH. ChenW. J. Koves

M. MorishitaJ. R. PayneG. B. Rawls, Jr.M. S. Shelton

Working Group on Design (BPV VIII Div. 3)

J. Keltjens, ChairC. Becht VR. C. BielR. CordesR. D. DixonL. FridlundR. T. HallmanG. M. MitalS. C. MordreG. T. NelsonD. T. PetersE. D. Roll

K. C. SimpsonD. L. StangK. SubramanianS. TeradaJ. L. TraudR. WinkY. XuF. Kirkemo, Contributing MemberD. J. Burns, Honorary MemberD. M. Fryer, Honorary MemberG. J. Mraz, Honorary MemberE. H. Perez, Honorary Member

Working Group on Materials (BPV VIII Div. 3)

F. W. Tatar, ChairL. P. AntalffyP. N. Chaku

J. A. KappA. K. Khare

Task Group on Impulsively Loaded Vessels (BPV VIII)

E. A. Rodriguez, ChairP. O. Leslie, SecretaryG. A. AntakiJ. K. AsahinaD. D. BarkerA. M. ClaytonJ. E. Didlake, Jr.T. A. DuffeyB. L. HaroldsenK. HayashiD. HildingK. W. KingR. Kitamura

R. A. Leishear

R. E. Nickell

F. Ohlson

C. Romero

N. Rushton

J. H. Stofleth

Q. Dong, Contributing Member

H.-P. Schildberg, ContributingMember

J. E. Shepherd, ContributingMember

M. Yip, Contributing Member

Subgroup on Interpretations (BPV VIII)

U. R. Miller, ChairT. Schellens, Staff SecretaryG. Aurioles, Sr.R. J. BasileJ. CameronR. D. DixonJ. F. GrubbD. L. KurleM. D. LowerR. Mahadeen

D. T. Peters

S. C. Roberts

C. D. Rodery

D. B. Stewart

P. L. Sturgill

D. A. Swanson

J. P. Swezy, Jr.

J. Vattappilly

T. P. Pastor, Contributing Member

xxiii

COMMITTEE ON WELDING, BRAZING, AND FUSING (BPV IX)

W. J. Sperko, ChairD. A. Bowers, Vice ChairS. J. Rossi, Staff SecretaryM. BernasekM. L. CarpenterJ. G. FeldsteinP. D. FlennerS. E. GingrichR. M. JesseeJ. S. LeeW. M. LundyT. MelfiW. F. Newell, Jr.A. S. OlivaresD. K. PeetzM. J. PischkeM. J. Rice

M. B. SimsM. J. StankoP. L. SturgillJ. P. Swezy, Jr.P. L. Van FossonR. R. YoungA. Roza, DelegateR. K. Brown, Jr., ContributingMember

M. Consonni, Contributing MemberS. A. Jones, Contributing MemberS. Raghunathan, ContributingMember

W. D. Doty, Honorary MemberB. R. Newmark, Honorary MemberS. D. Reynolds, Jr., HonoraryMember

Subgroup on Brazing (BPV IX)

M. J. Pischke, ChairE. W. BeckmanL. F. CampbellM. L. Carpenter

A. F. GarbolevskyA. R. NyweningJ. P. Swezy, Jr.

Subgroup on General Requirements (BPV IX)

P. L. Sturgill, ChairE. W. BeckmanJ. P. BellG. ChandlerP. R. EvansA. HowardR. M. Jessee

A. S. OlivaresD. K. PeetzH. B. PorterK. R. WillensE. W. WoelfelE. Molina, DelegateB. R. Newmark, Honorary Member

Subgroup on Materials (BPV IX)

M. Bernasek, ChairT. AndersonJ. L. ArnoldM. L. CarpenterE. CutlipS. S. FioreS. E. GingrichL. HarbisonR. M. Jessee

C. C. KimT. MelfiM. J. PischkeC. E. SainzW. J. SperkoM. J. StankoP. L. SturgillR. R. YoungV. G. V. Giunto, Delegate

Subgroup on Performance Qualification (BPV IX)

D. A. Bowers, ChairM. J. Rice, SecretaryM. A. BoringR. B. CorbitP. D. FlennerK. L. Hayes

J. S. Lee

W. M. Lundy

T. Melfi

E. G. Reichelt

M. B. Sims

Subgroup on Plastic Fusing (BPV IX)

M. L. Carpenter, ChairD. BurwellJ. M. CraigM. GhahremaniK. L. HayesR. M. JesseeJ. Johnston, Jr.E. W. McElroyJ. E. O’SullivanE. G. ReicheltM. J. Rice

S. Schuessler

P. L. Sturgill

J. P. Swezy, Jr.

M. Troughton

E. W. Woelfel

J. Wright

J. C. Minichiello, ContributingMember

C. W. Rowley, ContributingMember

Subgroup on Procedure Qualification (BPV IX)

D. A. Bowers, ChairM. J. Rice, SecretaryM. BernasekM. A. BoringL. HarbisonW. M. LundyW. F. Newell, Jr.S. Raghunathan

M. B. SimsW. J. SperkoS. A. SpragueJ. P. Swezy, Jr.P. L. Van FossonT. C. WiesnerD. Chandiramani, ContributingMember

COMMITTEE ON FIBER-REINFORCED PLASTIC PRESSURE VESSELS(BPV X)

D. Eisberg, ChairB. F. Shelley, Vice ChairP. D. Stumpf, Staff SecretaryF. L. BrownJ. L. BustillosT. W. CowleyI. L. DinovoT. J. FowlerM. R. GormanB. HebbD. H. Hodgkinson

L. E. Hunt

D. L. Keeler

B. M. Linnemann

N. L. Newhouse

D. J. Painter

G. Ramirez

J. R. Richter

F. W. Van Name

D. O. Yancey, Jr.

P. H. Ziehl

COMMITTEE ON NUCLEAR INSERVICE INSPECTION (BPV XI)

G. C. Park, ChairR. W. Swayne, Vice ChairR. A. Yonekawa, Vice ChairR. L. Crane, Staff SecretaryJ. M. AgoldV. L. ArmentroutJ. F. BallW. H. BamfordT. L. ChanR. C. CipollaD. D. DavisG. H. DeBooR. L. DyleE. V. Farrell, Jr.E. L. FarrowE. B. GerlachR. E. GimpleT. J. GriesbachD. O. HenryR. D. KerrS. D. KulatD. W. LamondD. R. Lee

G. A. LofthusE. J. MaloneyJ. E. O’SullivanR. K. RhyneD. A. ScarthF. J. Schaaf, Jr.J. C. Spanner, Jr.G. L. StevensD. E. WaskeyJ. G. WeicksT. YuharaH. D. Chung, DelegateC. Ye, DelegateB. R. Newton, Contributing MemberR. A. West, Contributing MemberJ. Hakii, AlternateJ. T. Lindberg, AlternateC. J. Wirtz, AlternateC. D. Cowfer, Honorary MemberF. E. Gregor, Honorary MemberO. F. Hedden, Honorary MemberP. C. Riccardella, Honorary Member

xxiv

Executive Committee (BPV XI)

R. A. Yonekawa, ChairG. C. Park, Vice ChairR. L. Crane, Staff SecretaryW. H. BamfordR. L. DyleM. J. FerlisiE. B. GerlachR. E. Gimple

S. D. Kulat

J. T. Lindberg

W. E. Norris

R. K. Rhyne

J. C. Spanner, Jr.

G. L. Stevens

R. W. Swayne

China International Working Group (BPV XI)

J. H. Liu, ChairY. Nie, Vice ChairC. Ye, Vice ChairM. W. Zhou, SecretaryJ. CaiD. X. ChenH. ChenH. D. ChenY. B. GuoY. HouP. F. HuD. M. KangX. Y. LiangZ. X. LiangS. X. Lin

L. Q. LiuY. LiuW. N. PeiC. L. PengG. X. TangQ. WangQ. W. WangZ. S. WangF. XuZ. Y. XuQ. YinK. ZhangY. ZhangZ. M. ZhongL. L. Zou

Germany International Working Group (BPV XI)

C. A. Spletter, SecretaryH.-R. BathB. HoffmannU. Jendrich

H. SchauX. SchulerJ. Wendt

Subgroup on Evaluation Standards (SG-ES) (BPV XI)

W. H. Bamford, ChairG. L. Stevens, SecretaryH. D. ChungR. C. CipollaG. H. DeBooR. L. DyleB. R. GantaT. J. GriesbachK. HasegawaK. HojoD. N. HopkinsK. Koyama

D. R. LeeY. LiR. O. McGillH. S. MehtaK. MiyazakiR. PaceJ. C. PoehlerS. RanganathD. A. ScarthT. V. VoK. R. WichmanS. X. Xu

Task Group on Evaluation of Beyond Design Basis Events (SG-ES)(BPV XI)

R. Pace, ChairK. E. Woods, SecretaryG. AntakiP. R. DonavinR. G. GiladaT. J. GriesbachH. L. GustinM. Hayashi

K. HojoS. A. KleinsmithH. S. MehtaD. V. SommervilleT. V. VoK. R. WichmanG. M. WilkowskiT. Weaver, Contributing Member

Working Group on Flaw Evaluation (SG-ES) (BPV XI)

R. C. Cipolla, ChairW. H. BamfordM. L. BensonB. BezensekH. D. ChungG. H. DeBooC. M. FaidyB. R. GantaR. G. GiladaH. L. GustinF. D. HayesP. H. HoangK. HojoD. N. HopkinsY. KimK. KoyamaV. LacroixD. R. Lee

Y. LiH. S. MehtaG. A. A. MiessiK. MiyazakiR. K. QashuS. RanganathH. RathbunP. J. RushD. A. ScarthW. L. ServerD.-J. ShimA. UdyawarT. V. VoB. WasilukK. R. WichmanG. M. WilkowskiD. L. Rudland, Alternate

Task Group on Evaluation Procedures for Degraded Buried Pipe(WG-PFE) (BPV XI)

R. O. McGill, ChairS. X. Xu, SecretaryG. AntakiR. C. CipollaG. H. DeBooK. HasegawaK. M. Hoffman

G. A. A. Miessi

M. Moenssens

D. P. Munson

R. Pace

P. J. Rush

D. A. Scarth

Working Group on Operating Plant Criteria (SG-ES) (BPV XI)

T. J. Griesbach, ChairV. Marthandam, SecretaryK. R. BakerW. H. BamfordH. BehnkeT. L. DicksonR. L. DyleA. E. FreedS. R. GosselinM. HayashiS. A. KleinsmithH. S. MehtaA. D. Odell

R. PaceN. A. PalmJ. C. PoehlerS. RanganathW. L. ServerD. V. SommervilleC. A. TomesA. UdyawarT. V. VoD. P. WeaklandK. E. WoodsT. Hardin, Alternate

Working Group on Pipe Flaw Evaluation (SG-ES) (BPV XI)

D. A. Scarth, ChairG. M. Wilkowski, SecretaryW. H. BamfordH. D. ChungR. C. CipollaN. G. CofieJ. M. DavisG. H. DeBooC. M. FaidyB. R. GantaS. R. GosselinL. F. GoyetteC. E. Guzman-LeongK. HasegawaP. H. HoangK. HojoD. N. HopkinsE. J. Houston

K. KashimaY. LiR. O. McGillH. S. MehtaG. A. A. MiessiK. MiyazakiS. H. PelletH. RathbunD. L. RudlandP. J. RushD.-J. ShimA. UdyawarT. V. VoB. WasilukS. X. XuA. Alleshwaram, AlternateM. L. Benson, Alternate

xxv

Subgroup on Nondestructive Examination (SG-NDE) (BPV XI)

J. C. Spanner, Jr., ChairD. R. Cordes, SecretaryD. AlleyT. L. ChanC. B. CheezemF. E. DohmenD. O. Henry

J. T. LindbergG. A. LofthusG. R. PerkinsS. A. SaboF. J. Schaaf, Jr.R. V. SwainC. J. Wirtz

Working Group on Personnel Qualification and Surface Visual andEddy Current Examination (SG-NDE) (BPV XI)

J. T. Lindberg, ChairJ. E. Aycock, SecretaryS. E. CumblidgeA. DiazN. FarenbaughD. O. Henry

J. W. HoufJ. C. Spanner, Jr.J. T. TimmM. C. WeatherlyM. L. WhytsellC. J. Wirtz

Working Group on Procedure Qualification and VolumetricExamination (SG-NDE) (BPV XI)

G. A. Lofthus, ChairG. R. Perkins, SecretaryM. T. AndersonM. BrileyC. B. CheezemA. D. ChockieD. R. CordesM. DennisS. R. Doctor

F. E. DohmenK. J. HackerD. B. KingD. A. KullC. A. NoveS. A. SaboR. V. SwainS. J. ToddD. K. Zimmerman

Subgroup on Repair/Replacement Activities (SG-RRA) (BPV XI)

E. B. Gerlach, ChairE. V. Farrell, Jr., SecretaryJ. F. BallS. B. BrownR. E. CantrellR. ClowP. D. FisherR. E. GimpleD. R. GrahamR. A. HermannK. J. KarwoskiR. D. Kerr

S. L. McCracken

B. R. Newton

J. E. O'Sullivan

S. Schuessler

R. R. Stevenson

R. W. Swayne

D. L. Tilly

D. E. Waskey

J. G. Weicks

R. A. Yonekawa

E. G. Reichelt, Alternate

Working Group on Welding and Special Repair Processes (SG-RRA)(BPV XI)

D. E. Waskey, ChairD. J. Tilly, SecretaryR. E. CantrellS. J. FindlanP. D. FisherM. L. HallR. A. HermannK. J. Karwoski

C. C. Kim

S. L. McCracken

D. B. Meredith

B. R. Newton

J. E. O'Sullivan

R. E. Smith

J. G. Weicks

Working Group on Nonmetals Repair/Replacement Activities(SG-RRA) (BPV XI)

J. E. O'Sullivan, ChairS. Schuessler, SecretaryM. T. AudrainJ. Johnston, Jr.T. M. Musto

S. PattersonB. B. RajiF. J. Schaaf, Jr.Z. J. Zhou

Task Group on Repair by Carbon Fiber Composites(WGN-MRR) (BPV XI)

J. E. O'Sullivan, ChairJ. W. CollinsM. GollietL. S. GordonT. JimenezG. M. LupiaM. P. Marohl

R. P. OjdrovicD. PegueroA. PridmoreB. B. RajiC. W. RowleyV. RoyJ. Wen

Working Group on Design and Programs (SG-RRA) (BPV XI)

R. Clow, ChairA. B. Meichler, SecretaryO. BhattyS. B. BrownJ. W. CollinsL. R. CorrR. R. CroftE. V. Farrell, Jr.E. B. Gerlach

D. R. Graham

G. F. Harttraft

T. E. Hiss

H. Malikowski

M. A. Pyne

R. R. Stevenson

R. W. Swayne

R. A. Yonekawa

Subgroup on Water-Cooled Systems (SG-WCS) (BPV XI)

S. D. Kulat, ChairN. A. Palm, SecretaryJ. M. AgoldV. L. ArmentroutJ. M. BoughmanS. T. ChesworthA. D. CinsonD. D. DavisH. Q. DoE. L. Farrow

M. J. Ferlisi

P. J. Hennessey

D. W. Lamond

A. McNeill III

T. Nomura

G. C. Park

J. E. Staffiera

H. M. Stephens, Jr.

R. Turner

Task Group on High Strength Nickel Alloys Issues (SG-WCS) (BPV XI)

R. L. Dyle, ChairB. L. Montgomery, SecretaryW. H. BamfordP. R. DonavinR. E. GimpleR. HardiesK. KoyamaM. LashleyH. Malikowski

S. E. Marlette

G. C. Park

J. M. Shuping

J. C. Spanner, Jr.

K. B. Stuckey

E. J. Sullivan, Jr.

B. C. Thomas

D. P. Weakland

Working Group on Containment (SG-WCS) (BPV XI)

J. E. Staffiera, ChairH. M. Stephens, Jr., SecretaryP. S. GhosalH. T. HillR. D. HoughB. LehmanJ. A. Munshi

D. J. Naus

A. A. Reyes-Cruz

E. A. Rodriguez

M. Sircar

S. G. Brown, Alternate

T. J. Herrity, Alternate

xxvi

Working Group on Inspection of Systems and Components(SG-WCS) (BPV XI)

J. M. Agold, ChairN. Granback, SecretaryR. W. BlydeC. Cueto-FelguerosoR. E. DayH. Q. DoM. J. FerlisiK. W. Hall

K. M. Hoffman

S. D. Kulat

A. Lee

T. Nomura

J. C. Nygaard

R. Rishel

G. J. Navratil, Alternate

Task Group on Optimization of Ultrasonic Evaluation Requirements(WG-ISC) (BPV XI)

M. J. Ferlisi, ChairK. W. HallD. O. HenryK. M. Hoffman

B. L. MontgomeryG. J. NavratilM. OrihuelaJ. C. Poehler

Working Group on Pressure Testing (SG-WCS) (BPV XI)

D. W. Lamond, ChairJ. M. Boughman, SecretaryD. AlleyY.-K. ChungJ. A. Doughty

R. E. HallA. E. KeyserJ. K. McClanahanB. L. MontgomeryS. A. Norman

Task Group on Buried Components Inspection and Testing(WG-PT) (BPV XI)

D. W. Lamond, ChairJ. M. Boughman, SecretaryM. Moenssens, SecretaryC. BlackwelderG. C. CokerR. E. DayR. Hardies

T. Ivy

A. Lee

G. M. Lupia

J. Ossmann

M. A. Richter

D. Smith

Working Group on Risk-Informed Activities (SG-WCS) (BPV XI)

M. A. Pyne, ChairS. T. Chesworth, SecretaryJ. M. AgoldC. Cueto-FelguerosoH. Q. DoR. FougerousseM. R. GraybealR. HaesslerJ. HakiiK. W. Hall

K. M. Hoffman

S. D. Kulat

D. W. Lamond

R. K. Mattu

A. McNeill III

P. J. O’ReganN. A. Palm

D. Vetter

J. C. Younger

Special Working Group on Editing and Review (BPV XI)

R. W. Swayne, ChairC. E. MoyerK. R. Rao

J. E. StaffieraD. J. TillyC. J. Wirtz

Special Working Group on Nuclear Plant Aging Management(BPV XI)

B. R. Snyder, ChairA. B. Meichler, SecretaryT. M. AnselmiS. AsadaD. V. BurgessY.-K. ChungD. D. DavisR. L. Dyle

A. L. Hiser, Jr.R. E. NickellK. SakamotoW. L. ServerR. L. TurnerG. G. YoungZ. ZhongM. Srinivasan, Alternate

Working Group on General Requirements (BPV XI)

R. K. Rhyne, ChairE. J. Maloney, SecretaryJ. F. BallT. L. ChanE. L. Farrow

P. J. HennesseyK. M. HermanR. K. MattuC. E. MoyerR. L. Williams

Special Working Group on Reliability and Integrity ManagementProgram (BPV XI)

F. J. Schaaf, Jr., ChairA. T. Roberts III, SecretaryN. BroomS. R. DoctorJ. FletcherS. R. GosselinN. GranbackJ. GrimmA. B. Hull

D. M. JonesA. L. KrinzmanD. R. LeeR. K. MillerM. N. MitchellR. MorrillT. RoneyR. W. SwayneS. Takaya

JSME/ASME Joint Task Group for System-Based Code (SWG-RIM)(BPV XI)

T. Asayama, ChairK. DozakiM. R. GraybealM. HayashiY. Kamishima

H. MachidaM. MorishitaF. J. Schaaf, Jr.S. TakayaD. Watanabe

COMMITTEE ON TRANSPORT TANKS (BPV XII)

M. D. Rana, ChairN. J. Paulick, Vice ChairT. Schellens, Staff SecretaryA. N. AntoniouP. ChilukuriW. L. GarfieldG. G. KarcherM. Pitts

T. A. RogersS. StaniszewskiA. P. VargheseM. R. WardJ. A. Byers, Contributing MemberR. Meyers, Contributing MemberM. D. Pham, Contributing MemberA. Selz, Contributing Member

Subgroup on Design and Materials (BPV XII)

A. P. Varghese, ChairR. C. Sallash, SecretaryD. K. ChandiramaniP. ChilukuriG. G. KarcherS. L. McWilliamsN. J. PaulickM. D. Rana

T. A. Rogers

A. Selz

M. R. Ward

K. Xu

J. Zheng, Corresponding Member

T. Hitchcock, Contributing Member

M. D. Pham, Contributing Member

xxvii

Subgroup on Fabrication, Inspection, and Continued Service(BPV XII)

M. Pitts, ChairP. Chilukuri, SecretaryW. L. GarfieldD. HayworthK. ManskerG. McRaeO. MuletT. A. RogersM. Rudek

R. C. SallashS. StaniszewskiS. E. Benet, Contributing MemberJ. A. Byers, Contributing MemberA. S. Olivares, ContributingMember

L. H. Strouse, Contributing MemberS. V. Voorhees, ContributingMember

Subgroup on General Requirements (BPV XII)

S. Staniszewski, ChairA. N. AntoniouJ. L. FreilerW. L. GarfieldO. MuletB. Pittel

M. Pitts

T. Rummel

R. C. Sallash

K. L. Gilmore, Contributing Member

L. H. Strouse, Contributing Member

Subgroup on Nonmandatory Appendices (BPV XII)

N. J. Paulick, ChairS. Staniszewski, SecretaryP. ChilukuriD. HayworthK. ManskerS. L. McWilliamsM. PittsT. A. RogersR. C. SallashD. G. Shelton

M. R. WardS. E. Benet, Contributing MemberD. D. Brusewitz, ContributingMember

J. L. Conley, Contributing MemberT. Eubanks, Contributing MemberT. Hitchcock, Contributing MemberA. Selz, Contributing MemberA. P. Varghese, ContributingMember

COMMITTEE ON BOILER AND PRESSURE VESSEL CONFORMITYASSESSMENT (CBPVCA)

P. D. Edwards, ChairL. E. McDonald, Vice ChairK. I. Baron, Staff SecretaryM. Vazquez, Staff SecretaryS. W. CameronJ. P. ChicoineD. C. CookM. A. DeVriesT. E. HansenK. T. LauD. MillerB. R. MorelockJ. D. O'LearyG. ScribnerB. C. TurczynskiD. E. TuttleE. A. WhittleR. V. WielgoszinskiP. Williams

D. Cheetham, Contributing MemberV. Bogosian, AlternateJ. B. Carr, AlternateJ. W. Dickson, AlternateM. B. Doherty, AlternateJ. M. Downs, AlternateB. J. Hackett, AlternateB. L. Krasiun, AlternateP. F. Martin, AlternateK. McPhie, AlternateM. R. Minick, AlternateI. Powell, AlternateR. Pulliam, AlternateR. Rockwood, AlternateR. D. Troutt, AlternateR. Uebel, AlternateJ. A. West, AlternateD. A. Wright, AlternateA. J. Spencer, Honorary Member

COMMITTEE ON NUCLEAR CERTIFICATION (CNC)

R. R. Stevenson, ChairJ. DeKleine, Vice ChairE. Suarez, Staff SecretaryG. GobbiS. M. GoodwinJ. W. HighlandsK. A. HuberJ. C. KraneM. A. LockwoodR. P. McIntyreM. R. MinickL. M. PlanteH. B. PrasseT. E. QuakaC. T. SmithD. M. VickeryC. S. Withers

S. YangS. F. Harrison, ContributingMember

S. Andrews, AlternateV. Bogosian, AlternateP. J. Coco, AlternateP. D. Edwards, AlternateD. P. Gobbi, AlternateK. M. Hottle, AlternateK. A. Kavanagh, AlternateB. G. Kovarik, AlternateM. A. Martin, AlternateM. Paris, AlternateA. Torosyan, AlternateE. A. Whittle, AlternateH. L. Wiger, Alternate

Subcommittee on Safety Valve Requirements (SC-SVR)

D. B. DeMichael, ChairJ. F. Ball, Vice ChairC. E. O’Brien, Staff SecretaryJ. BurgessS. CammeresiJ. A. CoxR. J. DoellingJ. P. Glaspie

S. F. Harrison, Jr.W. F. HartD. MillerB. K. NutterT. PatelZ. WangJ. A. WestR. D. Danzy, Contributing Member

Subgroup on Design (SC-SVR)

D. Miller, ChairC. E. BeairJ. A. ConleyR. J. Doelling

T. PatelJ. A. WestR. D. Danzy, Contributing Member

Subgroup on General Requirements (SC-SVR)

J. F. Ball, ChairG. BrazierJ. BurgessD. B. DeMichael

S. T. FrenchJ. P. GlaspieB. PittelD. E. Tuttle

Subgroup on Testing (SC-SVR)

J. A. Cox, ChairT. BeirneJ. E. BrittS. CammeresiJ. W. DicksonG. D. Goodson

W. F. Hart

B. K. Nutter

C. Sharpe

Z. Wang

A. Wilson

U.S. Technical Advisory Group ISO/TC 185 Safety Relief Valves

T. J. Bevilacqua, ChairC. E. O’Brien, Staff SecretaryJ. F. BallG. Brazier

D. B. DeMichaelD. MillerB. K. NutterJ. A. West

xxviii

ð15Þ AWS PERSONNELOfficers of AWS Committees

(Cooperating in the Development of the Specifications Herein)

As of January 8, 2015

A5 COMMITTEE ON FILLER METALS AND ALLIED MATERIALS

H. D. Wehr, ChairJ. J. DeLoach, Jr., 1st Vice ChairR. D. Fuchs, 2nd Vice ChairR. K. Gupta, SecretaryT. AndersonJ. C. BundyJ. L. CaronG. L. ChouinardD. D. CrockettR. V. DeckerD. M. FedorJ. G. FeldsteinD. A. FinkG. L. FrankeR. M. HensonS. D. KiserP. J. KonkolD. J. KoteckiL. G. KvidahlA. Y. LauJ. S. Lee

J. R. LoganT. MelfiM. T. MerloK. M. Merlo-JosephB. MosierA. K. MukherjeeT. C. MyersB. A. PletcherJ. D. PrasterK. C. PrudenK. RoossinckK. SampathF. A. SchweighardtW. S. SeveranceM. F. SinfieldD. SinghP. E. StauntonR. C. SutherlinR. A. SwainJ. Zhang

A5X EXECUTIVE SUBCOMMITTEE

H. D. Wehr, ChairJ. J. DeLoach, Jr., 1st Vice ChairR. D. Fuchs, 2nd Vice ChairR. K. Gupta, SecretaryJ. G. Feldstein

D. A. FinkD. J. KoteckiJ. S. LeeR. MenonR. A. Swain

A5A SUBCOMMITTEE ON CARBON AND LOW ALLOY STEELELECTRODES AND RODS FOR SHIELDED METAL ARC AND OXYFUEL

GAS WELDING

G. L. Franke, ChairR. A. Swain, Vice ChairR. K. Gupta, SecretaryR. V. DeckerJ. J. DeLoach, Jr.K. K. GuptaM. James

S. J. KnostmanD. J. KoteckiA. Y. LauT. C. MyersP. K. SalvesenK. SampathM. S. Sierdzinski

A5B SUBCOMMITTEE ON CARBON AND LOW ALLOY STEELELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING

T. Melfi, ChairR. K. Gupta, SecretaryH. BeckS. FrancisR. D. FuchsD. J. KoteckiM. T. Merlo

D. W. Meyer

T. C. Myers

P. J. Nicklas

A. K. Singh

R. D. Strugar

R. A. Swain

A5C SUBCOMMITTEE ON ALUMINUM ALLOY FILLER METALS

T. Anderson, ChairR. K. Gupta, SecretaryP. BerubeB. C. BoehringerW. D. EnglandG. F. Hofmann

M. James

S. E. Pollard

W. J. Sperko

L. T. Vernam

J. Zhang

A5D SUBCOMMITTEE ON STAINLESS STEEL FILLER METALS

D. J. Kotecki, ChairF. B. Lake, Vice ChairR. K. Gupta, SecretaryR. V. DeckerD. A. DelSignoreJ. G. FeldsteinR. D. FuchsM. JamesS. R. Jana

S. J. KnostmanW. P. KoegelG. A. KuriskyM. T. MerloS. J. MerrickR. A. SwainG. P. VillemezH. D. WehrJ. M. Zawodny

A5E SUBCOMMITTEE ON NICKEL AND NICKEL ALLOY FILLERMETALS

R. D. Fuchs, ChairS. D. Kiser, Vice ChairR. K. Gupta, SecretaryG. J. BruckJ. CaronM. L. CarusoG. S. ClarkJ. J. DeLoach, Jr.S. R. JanaD. D. Kiilunen

D. J. KoteckiG. A. KuriskyF. B. LakeJ. S. LeeJ. R. LoganR. A. MillerB. A. PletcherR. A. SwainH. D. WehrY. Yokota

A5F SUBCOMMITTEE ON COPPER AND COPPER ALLOY FILLERMETALS

K. Roossinck, ChairR. K. Gupta, SecretaryP. W. FischerJ. P. Hunt

D. J. JossickJ. TurriffH. D. Wehr

A5G SUBCOMMITTEE ON HARD SURFACING FILLER METALS

G. L. Chouinard, ChairR. K. Gupta, SecretaryT. A. BarnhartF. BroshjeitJ. Dezelle

W. E. LayoP. F. MendezJ. G. PostleV. B. Rajan

xxix

A5H SUBCOMMITTEE ON FILLERMETALS AND FLUXES FOR BRAZING

R. M Henson, ChairC. F. Darling, Vice ChairS. Borrero, SecretaryR. K. Gupta, Co-SecretaryK. AllenJ. J. BassindaleD. E. BudingerW. M. CoughlanR. P. DettyW. J. EngeronM. T. GrahamT. P. Hirthe

J. LongabuccoW. MigliettiT. OyamaM. J. PohlmanT. C. ProfughiS. S. RajanJ. P. SandsM. E. ScruggsA. E. ShapiroC. M. VolpeR. R. XuH. Zhao

A5I SUBCOMMITTEE ON TUNGSTEN ELECTRODES

W. S. Severance, ChairR. K. Gupta, SecretaryS. G. CaldwellS. S. DelmoreA. Endemann

S. FyffeP. M. GallagherM. E. GedgaudasR. A. SwainL. T. Van Boxtel

A5J SUBCOMMITTEE ON ELECTRODES AND RODS FOR WELDINGCAST IRON

S. D. Kiser, ChairR. K. Gupta, SecretaryR. A. Bishel

R. A. BusheyT. J. Eckardt

A5K SUBCOMMITTEE ON TITANIUM AND ZIRCONIUM FILLERMETALS

R. C. Sutherlin, ChairJ. Molin, SecretaryV. Perez, Co-SecretaryS. S. Delmore

B. KruegerK. T. TranG. E. Trepus

A5L SUBCOMMITTEE ON MAGNESIUM ALLOY FILLER METALS

R. K. Gupta, Secretary

A5M SUBCOMMITTEE ON CARBON AND LOW ALLOY STEELELECTRODES FOR FLUX CORED ARC WELDING

D. D. Crockett, ChairM. T. Merlo-Joseph, Vice ChairR. K. Gupta, SecretaryJ. C. BundyJ. J. DeLoach, Jr.G. L. FrankeD. W. HaynieS. R. JanaD. J. Kotecki

L. L. Kuiper

A. Y. Lau

K. M. Merlo-Joseph

T. C. Myers

J. S. Ogborn

B. A. Pletcher

M. F. Sinfield

R. A. Swain

A5N SUBCOMMITTEE ON CONSUMABLE INSERTS

H. D. Wehr, ChairW. J. Sperko, Vice ChairR. K. Gupta, Secretary

J. J. DeLoach, Jr.W. F. Newell, Jr.C. D. Sierra

A5O SUBCOMMITTEE ON CARBON AND LOW ALLOY STEELELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING

J. C. Bundy, ChairM. T. Merlo, Vice ChairR. K. Gupta, SecretaryD. D. CrockettR. V. DeckerJ. J. DeLoach, Jr.R. J. Fox

P. J. KonkolL. L. KuiperT. C. MyersV. B. RajanK. SampathR. D. StrugarD. A. Wright

A5P SUBCOMMITTEE ON CARBON AND LOW ALLOY STEELELECTRODES FOR ELECTROSLAG AND ELECTROGAS WELDING

J. S. Lee, ChairR. K. Gupta, SecretaryD. R. BajekJ. H. DevletianD. A. Fink

D. J. KoteckiD. C. PhillipsB. A. PletcherR. B. Turpin

A5S SUBCOMMITTEE ON GASES FOR GAS SHIELDED ARC WELDINGAND CUTTING

F. A. Schweighardt, ChairJ. M. Zawodny, Vice ChairR. K. Gupta, SecretaryE. Colvin

B. C. GeorgeD. B. LeturnoM. M. Skiles

A5T SUBCOMMITTEE ON FILLER METAL PROCUREMENTGUIDELINES

T. Melfi, ChairH. D. Wehr, Vice ChairR. K. Gupta, SecretaryT. A. DavenportR. V. DeckerD. A. Fink

S. J. KnostmanJ. S. LeeM. T. MerloP. K. SalvesenK. SampathR. A. Swain

A5W SUBCOMMITTEE ON MOISTURE AND HYDROGEN

D. M. Fedor, ChairJ. M. Blackburn, Vice ChairR. K. Gupta, SecretaryJ. D. FarrenD. A. FinkR. J. FoxG. L. Franke

J. L. KalpJ. KeeganD. J. KoteckiJ. S. LeeK. M. Merlo-JosephM. S. SierdzinskiM. F. Sinfield

xxx

ð15Þ PREFACE

On January 3, 1919, ASME participated with several other organizations in a meeting to discuss the continuation ofwartime research in welding. Out of that meeting, the American Welding Society was established and since that timethere has been a constant and interwoven record of development by the American Welding Society and The AmericanSociety of Mechanical Engineers of the techniques of welding. Through all of these great years of growth, many of theleaders in the field of engineering had the common interest of pressure equipment design and manufacture and the de-velopment of welding as a powerful tool in that manufacture. The evolution of this cooperative effort is contained inProfessor A. M. Greene’s “History of the ASME Boiler Code,” which was published as a series of articles in MechanicalEngineering from July 1952 through August 1953 and is now available from ASME in a special bound edition. The fol-lowing quotation from this history based on the minutes of the Committee notes the cooperative nature of the work donein the area of welding.

“During 1919, a number of cases involving welding were referred by the Boiler Code Committee to the Subcommittee onWelding.

“As the National Welding Council was to be discontinued, a new organization was to be formed to be known as the Amer-ican Welding Society with which the American Bureau of Welding was to be affiliated. This was to be a body representingthe entire industry and would eliminate commercial aspects, undertake research and standardization, and act as a judicialbody providing a medium for advancing the science and art of welding.”

In 1935 the AWS-ASTM Joint Committee on Filler Metal was organized to provide standard specifications for weldingrods, electrodes, filler metals, and fluxes for this developing U.S. industry.

In 1969 these two sponsors agreed to dissolve this joint activity and to permit the American Welding Society to as-sume sole responsibility for the family of welding rods, electrodes, filler metal, and flux specifications then in being.

In 1992, the ASME Board of Pressure Technology Codes and Standards endorsed the use of materials produced toother than AWS specifications. It is the intent of ASME to follow its procedures and practices currently in use to imple-ment the adoption of material specifications of AWS and other recognized national or international organizations.

Section II, Part C contains material specifications, most of which are identical to corresponding specifications pub-lished by AWS and other recognized national or international organizations. All adopted specifications are either repro-duced in the Code, where permission to do so has been obtained from the originating organization, or so referenced, andinformation about how to obtain them from the originating organization is provided. The ASME Committee reviews allmaterial specifications submitted to it and if it is felt that there is any need to adapt them for Code purposes, revisionsare made to them. However, there is constant liaison between ASME and AWS and other recognized national or inter-national organizations, and there will be continuing effort to see that the specifications as produced by AWS and otherrecognized national or international organizations and those printed in the ASME Code are identical.

To assure that there will be a clear understanding on the part of the users of Section II, ASME publishes both the iden-tical specifications and those amended for Code usage in three parts every 2 years.

The ASME Boiler and Pressure Vessel Code has been adopted into law by 50 states and many municipalities in theUnited States and by all of the Canadian provinces.

xxxi

GUIDELINE ON THE APPROVAL OF NEWWELDING AND BRAZINGMATERIAL CLASSIFICATIONS UNDER THE ASME BOILER AND

PRESSURE VESSEL CODE

Code Policy. It is the policy of the ASME Boiler and Pressure Vessel Committee to adopt for inclusion in Section II, PartC, only such specifications as have been adopted by the American Welding Society (AWS), and by other recognized na-tional or international organizations.It is expected that requests for Code approval will normally be for welding and brazing materials (hereafter termed

“consumables”) for which there is a recognized national or international specification. For consumables made to a re-cognized national or international specification other than those of the AWS, the inquirer shall give notice to the stan-dards developing organization that a request has been made to ASME for adoption of their specification under the ASMECode, and shall request that the organization to grant ASME permission to reprint the standard. For other consumables,a request shall be made to the AWS, or a recognized national or international organization, to develop a specification thatcan be presented to the Code Committee.It is the policy of the ASME Boiler and Pressure Vessel Committee to consider requests to adopt new consumables for

use by boiler, pressure vessel, or nuclear power plant component Manufacturers or end users. Further, such requestsshould be for consumables for which there is a reasonable expectation of use in a boiler, pressure vessel, or nuclearpower plant component constructed to the rules of one of the Sections of this Code.Application. The inquirer shall identify to the Committee all product forms, size ranges, and specifications for which

incorporation is desired, and state whether or not the consumable is covered by patents, whether or not it is licensed,and if licensed, any limitations on its manufacture.Weldability/Brazability. The inquirer shall furnish complete data on procedure qualification tests made in accor-

dance with the requirements of Section IX. Such tests shall be made over the full range of base metal thickness in whichthe consumable is to be used. Pertinent information on deposited metal, such as effects from postweld heat treatment,susceptibility to air hardening, effects of joining processes, expected notch toughness values, and the amount of experi-ence in use of the consumable shall be given.Physical Changes. For new consumables, it is important to know the structural stability characteristics and the de-

gree of retention of properties with exposure at temperature. The influence of welding or brazing and thermal treatmentoperations on the mechanical properties, ductility, and microstructure of the deposited metal are important, particularlywhere degradation in properties may occur. Where particular temperature ranges of exposure or heat treatment, cool-ing rates, combinations of mechanical working and thermal treatments, fabrication practices, exposure to particular en-vironments, etc., cause significant changes in the mechanical properties, microstructure, resistance to brittle fracture,etc., it is of prime importance to call attention to those conditions that should be avoided in service or in manufactureof parts or vessels using the consumable.Requests for Additional Data. The Committee may request additional data, including data on properties or depos-

ited metal behavior not explicitly treated in the construction Code in which adoption is desired.Code Case. The Code Committee will consider the issuance of an ASME Code Case, to be effective for a period of three

years, permitting the treatment of a new welding or brazing material under an existing ASME Section IX grouping forqualification purposes, provided that the following conditions are met:(a) The inquirer provides evidence that a request for coverage of the consumable in a specification has been made to

the AWS or a recognized national or international organization;(b) the consumable is commercially available and can be purchased within the proposed specification requirements;(c) the inquirer shows that there will be a reasonable demand for the consumable by industry and that there exists an

urgency for approval by means of a Code Case;(d) the request for approval of the consumable shall clearly describe it in specification form, including applicable items

as scope, process, manufacture, conditions for delivery, heat treatment, chemical and tensile requirements, testing spe-cifications and requirements, workmanship, finish, marking, inspection, and rejection;(e) all other requirements identified previously under Code Policy and Application apply; and(f) the inquirer shall furnish the Code Committee with all the data specified in this Guideline.

xxxii

Requirements for Requests for ASME Acceptance of Welding and Brazing Material Specifications to Recog-nized National or International Standards Other Than the AWS. The Committee will consider only requests in ac-cordance with the Boiler and Pressure Vessel Committee Operating and Administrative Procedures, OP-8.6 (Englishlanguage: U.S. or SI/metric units). The Committee will consider accepting specifications of recognized national or inter-national organizations in accordance with OP-8.6 such as, but not limited to, AWS, CSA, CEN, DIN, and JIS. Consumablespecifications of other than national or international organizations, such as those of consumable producers and suppli-ers, will not be considered for acceptance.

Requirements for Recognized National or International Specifications. Acceptable consumable specifications willbe identified by date or edition. Approved edition(s) will be stated in the subtitle of the ASME specification. Minimumrequirements that must be contained in a consumable specification for which acceptance is being requested include suchitems as name of national or international organization, scope, reference documents, process, manufacture, conditionsfor delivery, heat treatment, chemical and tensile requirements, testing specifications and requirements, workmanship,finish, marking, inspection, and rejection.

Publication of Recognized National or International Specifications. Specifications for which ASME has not beengiven permission to publish by the originating organization will be referenced on a cover sheet in appropriate Appen-dices in Section II, Part C, along with information xxix on where to obtain a copy of those documents. Documents that arereferenced in non-AWS consumable specifications will not be published by ASME. However, information on where toobtain a copy of those documents will be maintained in Section II, Part C. Additions and exceptions to the consumablespecification will be noted in the subtitle of the specification.

NewWelding and Brazing Materials Checklist. To assist inquirers desiring Code coverage for new consumables, orextending coverage of existing consumables, the Committee has developed the following checklist of items that ought tobe addressed by each inquiry. The Committee reserves the right to request additional data and application informationwhen considering new consumables.

(a) Has a qualified inquirer request been provided?(b) Has a request for either revision to existing Code requirements or for a Code Case been defined?(c) Has a letter to the AWS been submitted requesting coverage of the new consumable in a specification, and has a

copy been submitted to the Committee? Alternatively, is this consumable already covered by a specification issued by arecognized national or international organization, and has an English language version been provided?

(d) Has the Construction Code and Division coverage been identified?(e) Have mechanical property data been submitted (ultimate tensile strength, yield strength, reduction of area, and

elongation) for each intended joining process?(f) Have toughness considerations required by the Construction Code been defined and has appropriate data been

submitted?(g) Have joining requirements been defined and has procedure qualification test data been submitted?(h) Has influence of fabrication practices on deposited metal properties been defined?

xxxiii

SUMMARY OF CHANGES

After publication of the 2015 Edition, Errata to the BPV Code may be posted on the ASMEWeb site to provide correctionsto incorrectly published items, or to correct typographical or grammatical errors in the BPV Code. Such Errata shall beused on the date posted.

Information regarding Special Notices and Errata is published by ASME at http://go.asme.org/BPVCerrata.

Changes given below are identified on the pages by a margin note, (15), placed next to the affected area.

The Record Numbers listed below are explained in more detail in “List of Changes in Record Number Order” followingthis Summary of Changes.

Page Location Change (Record Number)

v List of Sections Revised

vii Foreword (1) Revised(2) New footnote added by errata (13-860)

x Submittal of TechnicalInquiries to the Boilerand Pressure VesselStandards Committees

In last line of 6(a), URL revised

xii Personnel Updated

xxix AWS Personnel Updated

xxxi Preface Penultimate paragraph editorially revised

1 SFA-5.01M/SFA-5.01 Revised in its entirety (13-1736)

33 SFA-5.1/SFA-5.1M Revised in its entirety (13-348)

101 SFA-5.4/SFA-5.4M Revised in its entirety (13-349)

139 SFA-5.5/SFA-5.5M Revised in its entirety (14-1412)

269 SFA-5.9/SFA-5.9M Revised in its entirety (13-350)

327 SFA-5.11/SFA-5.11M Revised in its entirety (13-1047)

441 SFA-5.16/SFA-5.16M Revised in its entirety (13-1046)

565 SFA-5.22/SFA-5.22M Revised in its entirety (13-351)

787 SFA-5.30/SFA-5.30M In Table 2, for AWS Classification IN504, entry under V corrected byerrata (13-1065)

839 SFA-5.34/SFA-5.34M Revised in its entirety (13-1655)

xxxiv

LIST OF CHANGES IN RECORD NUMBER ORDER

Record Number Change

13-348 Adopted AWS A5.1/A5.1M:2012, “Specification for Carbon Steel Electrodes for Shielded MetalArc Welding" as SFA-5.1/SFA-5.1M.

13-349 Adopted AWS A5.4/A5.4M:2012, "Specification for Stainless Steel Electrodes for Shielded MetalArc Welding" as SFA-5.4/SFA-5.4M.

13-350 Adopted AWS A5.9/A5.9M:2012, "Specification for Bare Stainless Steel Welding Electrodes andRods" as SFA-5.9/SFA-5.9M.

13-351 Adopted AWS A5.22/A5.22M:2012, "Specification for Stainless Steel Flux Cored and MetalCored Welding Electrodes and Rods" as SFA-5.22/SFA-5.22M.

13-860 In the Foreword, the subtitle has been deleted and replaced with an ANSI disclaimer as foot-note.

13-1046 Adopted AWS A5.16/A5.16M:2013 (ISO 24034:2010 MOD), "Specification for Titanium andTitanium-Alloy Welding Electrodes and Rods" as SFA-5.16/SFA-5.16M.

13-1047 Adopted AWS A5.11/A5.11M:2010, "Specification for Nickel and Nickel-Alloy Welding Elec-trodes for Shielded Metal Arc Welding" as SFA-5.11/SFA-5.11M.

13-1065 Errata correction. See Summary of Changes for details.13-1655 Adopted AWS A5.34/A5.34M:2013, "Specification for Nickel-Alloy Electrodes for Flux Cored

Arc Welding" as SFA-5.34/SFA-5.34M.13-1736 Adopted AWS A5.01M/A5.01:2013 (ISO 14344:2010 MOD), "Welding Consumables— Procure-

ment of Filler Materials and Fluxes" as SFA-5.01M/SFA-5.01.14-1412 Adopted AWS A5.5/A5.5M:2014, “Specification for Low-Alloy Steel Electrodes for Shielded Me-

tal Arc Welding” as SFA-5.5/SFA-5.5M.

xxxv

CROSS-REFERENCING AND STYLISTIC CHANGES IN THE BOILERAND PRESSURE VESSEL CODE

There have been structural and stylistic changes to BPVC, starting with the 2011 Addenda, that should be noted to aidnavigating the contents. The following is an overview of the changes:

Subparagraph Breakdowns/Nested Lists Hierarchy

• First-level breakdowns are designated as (a), (b), (c), etc., as in the past.• Second-level breakdowns are designated as (1), (2), (3), etc., as in the past.• Third-level breakdowns are now designated as (-a), (-b), (-c), etc.• Fourth-level breakdowns are now designated as (-1), (-2), (-3), etc.• Fifth-level breakdowns are now designated as (+a), (+b), (+c), etc.• Sixth-level breakdowns are now designated as (+1), (+2), etc.

Footnotes

With the exception of those included in the front matter (roman-numbered pages), all footnotes are treated as end-notes. The endnotes are referenced in numeric order and appear at the end of each BPVC section/subsection.

Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees

Submittal of Technical Inquiries to the Boiler and Pressure Vessel Standards Committees has been moved to the frontmatter. This information now appears in all Boiler Code Sections (except for Code Case books).

Cross-References

It is our intention to establish cross-reference link functionality in the current edition and moving forward. To facil-itate this, cross-reference style has changed. Cross-references within a subsection or subarticle will not include the des-ignator/identifier of that subsection/subarticle. Examples follow:• (Sub-)Paragraph Cross-References. The cross-references to subparagraph breakdowns will follow the hierarchy of

the designators under which the breakdown appears.– If subparagraph (-a) appears in X.1(c)(1) and is referenced in X.1(c)(1), it will be referenced as (-a).– If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.1(c)(2), it will be referenced as (1)(-a).– If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.1(e)(1), it will be referenced as (c)(1)(-a).– If subparagraph (-a) appears in X.1(c)(1) but is referenced in X.2(c)(2), it will be referenced as X.1(c)(1)(-a).

• Equation Cross-References. The cross-references to equations will follow the same logic. For example, if eq. (1) ap-pears in X.1(a)(1) but is referenced in X.1(b), it will be referenced as eq. (a)(1)(1). If eq. (1) appears in X.1(a)(1) butis referenced in a different subsection/subarticle/paragraph, it will be referenced as eq. X.1(a)(1)(1).

xxxvi

ð15Þ

WELDING CONSUMABLES — PROCUREMENT OFFILLER MATERIALS AND FLUXES

SFA-5.01M/SFA-5.01

(Identical with AWS Specification A5.01M/A5.01:2013 (ISO 14344:2010 MOD). In case of dispute,the original AWS text applies.)

ASME BPVC.II.C-2015 SFA-5.01M/SFA-5.01

1

ASME BPVC.II.C-2015SFA-5.01M/SFA-5.01

2

Welding Consumables—Procurementof Filler Materials and Fluxes

1 Scope

This standard identifies various information necessary for communication between a purchaser and asupplier of welding consumables. This standard, together with an AWS, ISO, or other recognized weldingconsumable standard, provides a method for preparing those specific details needed for welding consumableprocurement which consist of the following:

a) the welding consumable classification (selected from the pertinent AWS, ISO, or other applicablewelding consumable standard);

b) the lot class (selected from Clause 4 of this standard);

c) the testing schedule (selected from Clause 5 of this standard).

Selection of the specific welding consumable classification, lot class and testing schedule will depend uponthe requirements of the application for which the welding consumable is being procured.

2 Normative References

The following normative documents contain provisions which, through references in this text, constituteprovisions of this standard. For dated references, subsequent amendments to, or revisions of, any of thesepublications do not apply. However, parties to agreements based on this standard are encouraged toinvestigate the possibility of applying the most recent editions of the normative documents indicated below.For undated references, the latest editions of the normative documents referred to apply. Members of ISOand IEC maintain registers of currently valid International Standards.

2.1 The following AWS standards1 are referenced in the mandatory section of this document.

AWS A3.0 M/A3.0, Standard Welding Terms and Definitions, Including Terms for Adhesive Bonding, Brazing,Soldering, Thermal Cutting, and Thermal Spraying

AWS A5.02/A5.02M, Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes

2.2 The following ASTM standard2 is referenced in the mandatory section of this document:

ASTM E29, Standard Practice for Using Significant Digits in Test Data to Determine Conformance withSpecifications

2.3 The following ISO standard3 is referenced in the mandatory section of this document.

ISO 544, Welding Consumables — Technical Delivery Conditions for Welding Filler Materials — Type ofProduct, Dimensions, Tolerances and Markings

1 AWS standards are published by the American Welding Society, 8669 NW 36 St, # 130, Miami, FL 33166.2 ASTM standards are published by ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428.3 ISO standards are published by the International Organization for Standardization, 1 rue de Varembé, Case postale 56,CH-1211 Geneva 20, Switzerland.