arion games free miniatures
DESCRIPTION
MiniaturesTRANSCRIPT
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY INSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONS
AG00AG00AG00AG000000 ———— FREE MINIATURESFREE MINIATURESFREE MINIATURESFREE MINIATURES These miniatures are supplied in two forms. One page contains all of the Flat / A-frame miniatures, and the other two pages have the triagonal miniatures on them. These can be assembled into three different forms, and full instructions are given below.
Print out as many pages as you need of your preferred type, preferably on 160gsm card, cut, glue and use.
Credits: Produced by Graham Bottley Created using the Poser 6 program from Curious Labs. Models used mainly from DAZ3D. (www.daz3d.com). The Darcassian is from X2000, Textures from Daz3D and John Malis.
FlatFlatFlatFlat Miniatures Miniatures Miniatures Miniatures 1 Cut out the flat miniatures, including the
hatched base panels:
2 Gently score along the short horizontal
lines with a blunt blade. 3 Fold the miniature along the score lines
so that it looks like this:
4 Apply paper glue to the insides of the
figure panels. 5 Press glued panel together and ensure
they stick. Use a paper clip or hold for a minute if necessary.
6 Apply glue to the reverse of the hatched
panel. Press panel against base of miniature.
7 Use a paper clip to keep the miniature
closed until the glue is dry.
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY INSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONS
Triagonal MiniaturesTriagonal MiniaturesTriagonal MiniaturesTriagonal Miniatures 1 Cut the triagonal miniatures out so that
the blank panels are to the right of the three filled panels.
2 Using a blunt blade, gently score along
all of the upright lines. 3 Fold along all of the score marks so that
the miniature looks like this:
4 Apply paper glue to the outside of the
blank panel. Press to the inside of the first filled panel.
5 Use a paper clip to keep the miniature
closed until the glue is dry.
AAAA----Frame MiniaturesFrame MiniaturesFrame MiniaturesFrame Miniatures 1 Cut out the flat miniatures, cutting off
the hatched base panels:
2 Gently score along the short horizontal
lines with a blunt blade. 3 Fold the miniature along the score lines
so that it looks like this:
4 Apply paper glue to the blank base flap. 5 Press glued panel to the back of the name
panel. 6 Use a paper clip to keep the miniature
closed until the glue is dry.
ASSEMBLY ASSEMBLY ASSEMBLY ASSEMBLY INSTRUCTIONSINSTRUCTIONSINSTRUCTIONSINSTRUCTIONS
Topped Topped Topped Topped Triagonal MiniaturesTriagonal MiniaturesTriagonal MiniaturesTriagonal Miniatures 1 Cut the topped triagonal miniatures out
so that the blank panels are to the right of the three filled panels.
2 Using a blunt blade, gently score along
all of the fold lines. 3 Fold along all of the score marks so that
the miniature looks like this:
4 Apply paper glue to the outside of the
small blank panel. Press to the inside of the first filled panel.
5 Use a paper clip to keep the miniature
closed until the glue is dry.
6 Apply paper glue to the outside of the
two top flaps and press them against the inside of the upright panels.
7 Apply pressure to the flaps from the
inside until the glue is dry enough to hold the miniature together.
