architectural railing system - trexcommercial.com · architectural railing system 7008 northland...
TRANSCRIPT
DOT™Architectural Railing System
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercialproducts.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
The Dot series most distinguishable feature is its unobtrusive circular glass mounts attached to our trapezoidal posts. Both handrail and top rail choices have multiple rail standoff options creating more flexibility for your design.electrical conduit would accommodate the custom railing design.
Dot™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercialproducts.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Mounting Options
As an alternative to the standard top mount base plate option there are 3 standard options for side mounting. The rectangular base plate side mount is a clean mounting option. The node style side mount option gives a minimalistic installation look. The oval side mount base plate provides a linearly compact look.
Rectangle Base Plate
Node Mount
Oval Base Plate
AR-BPL-03-316
AR-SLD-01-316
AR-SLD-01-316
AR-SLD-01-316
AR-SLD-01-316
AR-SLD-01-316
AR-BPL-04-316
AR-SMT-316
AR-SMT-316
AR-SMT-316
Dot™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercialproducts.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Configuration Options
There are two standard configuration choices. • Handrail configuration has the glass at 42” and a handrail at 36”• Top rail configuration with the top rail at 42” Other options can be achieved. Contact your Trex Commercial Products representative for more information.
Tech Specifications
Material: Stainless Steel (suitable for interior and exterior applications)
Height: 42” or Custom
Standard spacing : 4’ On Center
Mount Type: Top or Fascia (3 standard options)
Top Rail/Handrail: 1.5” Diameter (#4 Finish)
Post Finish: 180 Grit Straight-line
Component Finish: 42 RA Max (Directional)
Infill options: Glass: 9/16” laminated glass – Standard (Multiple Glass Configurations Available)
ASTM STDS: A240/A240M/A554/A555/A666 (Stainless), C1048-12 (Glass),
F837-08 & F2281-04 (S/S Hardware)
Dot™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercialproducts.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Handrail Configuration
Top Rail Configuration
Handrail/Top Rail Splice
#10-24 X 1” LOWHEAD SHCS
#10-24 X 1” LOWHEAD SHCS
4’ MAX C-C
4’ MAX C-C
3’-6”
3’-6”
4”MIN
4”MIN
3’- 0”
3”
3”
3/4” X 2” STAINLESSSTEEL TRAPEZOID POST
3/4” X 2” STAINLESSSTEEL TRAPEZOID POST
5” X 6” X 5/8” STAINLESSSTEEL BASEPLATE
5” X 6” X 5/8” STAINLESSSTEEL BASEPLATE
1 1/2” O.D. STAINLESSSTEEL HANDRAIL
1 1/2” O.D. STAINLESSSTEEL HANDRAIL
DOT SERIES HANDRAILSTAND-OFF
DOT SERIES HANDRAIL STAND-OFF
9/16” LAMINATED GLASS – STANDARD
(MULTIPLE GLASS CONFIGURATIONS
AVAILABLE)
9/16” LAMINATED GLASS – STANDARD
(MULTIPLE GLASS CONFIGURATIONS
AVAILABLE)
DOT SERIES GLASSSTAND-OFF
DOT SERIES GLASSSTAND-OFF
HAIRLINE JOINT
INTERNAL SPLICE-LOCKINTERNAL EPOXY
SPLICE SLEEVE
1 1/2" x 11 GA. S.S. TUBEHAIRLINE JOINT
3/8”-16 X 1”SET SCREW (2X)
Epoxy Splice Splice Lock
Dot™ Series
7008 Northland Drive, Suite 150 Minneapolis, Minnesota 55428 p: 1-877-215-7245 w: trexcommercialproducts.com
© 2017 Trex Commercial Products, Inc. All rights reserved. Trex® is a federally registered trademark of Trex Company, Inc., Winchester, Virginia
Attachment Slide Infill Bracket Standoff
Top Mount Rectangular Base Plate Fascia Mount Rectangular Base Plate
Fascia Mount Node Mount Fascia Mount Oval Base Plate
Notes:Handrails can be mounted to concrete or steel. Anchor size/Type may vary due to field conditions.
3/8” X 4 3/8” HILTI HIT-Z-R RODW/ 3/8” S/S NYLOCK NUTAND HILTI HY200 EPOXY(2 3/8” MIN. EMBED.)
3/8” X 4 3/8” HILTI HIT-Z-R RODW/ 3/8” S/S NYLOCK NUTAND HILTI HY200 EPOXY(2 3/8” MIN. EMBED.)
3/8” X 4 3/8” HILTI HIT-Z-R RODW/ 3/8” S/S NYLOCK NUTAND HILTI HY200 EPOXY(2 3/8” MIN. EMBED.)
3/8” X 4 3/8” HILTI HIT-Z-R RODW/ 3/8” S/S NYLOCK NUTAND HILTI HY200 EPOXY(2 3/8” MIN. EMBED.)