applications scion...4 scion xb 2004-2007 dash disassembly 99-8209 1. pull outward on the (3)...
TRANSCRIPT
-
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APPLICATIONS
1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-8209
REV.
3/2
1/12
Scion
•DINradioprovisionwithpocket•ISOmountradioprovisionwithpocket
WIRING & ANTENNA CONNECTIONS(soldseparately)Wireharness:70-1761Toyotaharness1987-upAntennaadapter:Notrequired
•Panelremovaltool•Phillipsscrewdriver•Socketwrench
C
D E
A B
•A)Radiohousing•B)Bracketset1•C)Bracketset2•D)ISOSnap-inbrackets•E)Trimplate
TOOLS REQUIRED
KIT FEATURES
KIT COMPONENTS
99-8209
xA 2004-2006xB 2004-uptC 2005-2010xD 2008-up
-
Table of Contents
Dash Disassembly
– ScionxA2004-2006.......................................................................................................3
– ScionxB2004-2007.......................................................................................................4
– ScionxB2008-up...........................................................................................................5
– SciontC2005-2010........................................................................................................6
– ScionxD2008-up...........................................................................................................7
Kit Assembly
– DINradioprovisionwithpocket.......................................................................................8
– ISOmountradioprovisionwithpocket............................................................................9
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
99-8209
CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
Note: Refer to the instructions included with the aftermarket radio.
-
1. Pulloutwardonthe(3)climatecontrolknobsandremove.(FigureA)
2. Remove(2)Phillipsscrewsfrombehindtheoutertwoclimateknobs.(FigureB)
3. Unsnapandremovethetrimpiecesoneachsideoftheclimatecontrol/ashtray/pocketassembly.(FigureC)
4. Remove(2)Phillipsscrewsfromthebottomoftheclimatecontrol/radiotrimpanelandunsnapandremovetheentirepanel.(FigureD)
5. Remove(4)10mmboltssecuringtheradio.Unplugandremovetheradio.(FigureE)
Continue to kit assembly
3
Scion xA 2004-2006
Dash Disassembly 99-8209
OFF
HI
(Figure C)
OFF
HI
(Figure D)
(Figure E)
(Figure B)
OFF
HI
(Figure A)
OFF
HI
-
4
Scion xB 2004-2007
Dash Disassembly 99-8209
1. Pulloutwardonthe(3)climatecontrolknobsandremove.(FigureA)
2. Remove(2)Phillipsscrewsfrombehindtheouter(2)knobs.(FigureB)
3. Unsnapandremovetheentirepanelsurroundingtheclimatecontrolsandtheradio.(FigureC)
4. Remove(4)10mmboltssecuringtheradio.Unplugandremovetheradio.
Continue to kit assembly
OFF
HI
OFF
HI
OFF
HI
(Figure A)
(Figure B)
(Figure C)
-
5
Scion xB 2008-up
Dash Disassembly 99-8209
1. UnclipandremovethetrimpanelaroundtheradioincludingtheA/Cvents.(FigureA)
2. Unclipandremovethetrimpanelatthebottomedgeofthedashcavity.(FigureA)
3. Remove(4)10mmboltssecuring theradio.Unplugandremovetheradio.(FigureB)
Continue to kit assembly(Figure A)
(Figure B)
-
6
Scion tC 2005-2010
Dash Disassembly 99-8209
1. Unsnaptrimfromaroundshifter,notnecessarytocompletelyremove.(FigureA)
2. Unsnapandremovepanelfromaroundradio, includingclimatecontrolsandradiodoor.(FigureB)
3. Remove(2)10mmnutsfromthetopmountinglocationsand(2)Phillipsscrewsfromthebottommountinglocationstoremovetheradio.(FigureC)
Continue to kit assembly(Figure A)
(Figure B)
(Figure C)
-
7
Scion xD 2008-up
Dash Disassembly 99-8209
1. Unclipradiotrimpanel.Unplugandremovepanel.(FigureA)
2. Remove(4)Phillipsscrewssecuringtheradio. Unplugandremoveradio. (FigureB)
3. Removefactorybracketsfromradio.Retainbracketsforuseduringkitassembly.(FigureC)
Continue to kit assembly
(Figure A)
(Figure B)
(Figure C)
-
8
DIN radio provision with pocket
Kit Assembly 99-8209
1. SlidetheMountingBracketsontothesidesoftheRadioHousinguntilthesideclipsengage.(FigureA)
Note: Use Bracket Set 1 for xA, xB, and tC. Use Bracket Set 2 for the 2008 xB and xD.
2. ForBracketSet1cutandremoveallmountingtabsexceptthetabsbeingusedforyourapplication.(FigureB)
Note:Tabs are marked xA, xB and tC. For Bracket Set 2 skip to step 3.
3. SlidetheDINcageintotheRadiohousingandsecurebybendingthemetallockingtabsoutward.(FigureC)
4. Slidetheaftermarketradiointothecageuntilitsnapsintoplace.(FigureD)
5. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegative batteryterminalandtesttheunitforproperoperation.
6. Reassembledashinreverseorderofdisassembly.
(Figure B)
(Figure C)
(Figure D)
(Figure A)
side clips
Bracket Set 1
-
9
ISO mount radio provision with pocket
Kit Assembly 99-8209
1. SlidetheMountingBracketsontothesidesoftheRadioHousinguntilthesideclipsengage.(FigureA)
Note: Use Bracket Set 1 for xA, xB, and tC Use Bracket Set 2 for the 2008 xB and xD.
2. ForBracketSet1cutandremoveallmountingtabsexceptthetabsbeingusedforyourapplication.(FigureB)
Note:Tabs are marked xA, xB and tC. For Bracket Set 2 skip to step 3.
3. MounttheISOBracketstotheradiousingthescrewssuppliedwiththeradio.(FigureC)
4. Slidetheaftermarketradiointothecageuntilitsnapsintoplace.(FigureD)
5. SnaptheTrimPlateontothefrontoftheRadioHousing.(FigureD)
6. Locatethefactorywiringharnessinthedash.MetrarecommendsusingthepropermatingadapterfromMetraorAXXESS.Re-connectthenegative batteryterminalandtesttheunitforproperoperation.
7. Reassembledashinreverseorderofdisassembly.
(Figure B)
(Figure C)
(Figure D)
(Figure A)
side clips
Bracket Set 1
-
Notes
-
Notes
-
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932 metraonline.com
INSTALLATION INSTRUCTIONS FOR PART 99-8209
REV.
3/2
1/12
-
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
APLICACIONES
1-800-221-0932 metraonline.com
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8209
REV.
3/2
1/12
Scion
•ProvisiónderadioDINconbolsillo•ProvisiónderadiodemontajeISOconbolsillo
CABLEADO Y CONEXIONES DE ANTENA(sevendenporseparado)Arnésdecableado:70-1761-ArnésToyota1987ymásrecientesAdaptadordeantena:Noserequiere
•Herramientaderemocióndepanel•DestornilladorPhillips•Herramientatomadecorriente
C
D E
A B
•A)Carcasadelradio•B)Conjuntodesoportes1•C)Conjuntodesoportes2 •D)SoportesapresiónISO•E)Placademoldura
HERRAMIENTAS REQUERIDAS
CARACTERÍSTICAS DEL KIT
COMPONENTES DEL KIT
99-8209
xA 2004-2006xB 2004ymastC 2005-2010xD 2008ymas
-
Indice
Desmontaje del tablero
– ScionxA2004-2006.......................................................................................................3
– ScionxB2004-2007.......................................................................................................4
– ScionxB2008ymásrecientes.......................................................................................5
– SciontC2005-2010........................................................................................................6
– ScionxD2008ymásrecientes.......................................................................................7
Ensamble del kit
– ProvisiónderadioDINconbolsillo...................................................................................8
– ProvisiónderadiodemontajeISOconbolsillo.................................................................9
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
99-8209
PRECAUCIÓN: Metra recomienda desconectar el terminal negativo de la batería antes de comenzar cualquier instalación. Todos los accesorios, interruptores y, especialmente, las luces indicadoras de airbag deben estar enchufados antes de volver a conectar la batería o comenzar el ciclo de ignición.
Nota: Remítase a las instrucciones incluidas con el radio de posventa.
Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP).
EL CONOCIMIENTO ES PODERMejoresushabilidadesdeinstalaciónyfabricacióninscribiéndoseenlaescueladedispositivoselectrónicosmóvilesmásreconocidayrespetadadenuestraindustria.Regístreseenwww.installerinstitute.comollameal800-354-6782paraobtenermásinformaciónyavancehaciaunfuturomejor.
-
1. Jalehaciaafueralas(3)perillasdecontroldeclimayquítelas.(FiguraA)
2. Quitelos(2)tornillosPhillipsdelapartedeatrásdelasdosperillasexterioresdelclima.(FiguraB)
3. Suelteapresiónyquitelaspiezasdemolduradecadaladodelensambledelcontroldeclima/cenicero/bolsillo.(FiguraC)
4. Quitelos(2)tornillosPhillipsdelaparteinferiordelpaneldelcontroldeclima/radioyluegosuelteapresiónyquitetodoelpanel.(FiguraD)
5. Quitelos(4)pernosde10mmquesostienenelradio.Desconecteyquiteelradio.(FiguraE)
Continuará al ensamble del kit
3
Scion xA 2004-2006
Desmontaje del tablero 99-8209
OFF
HI
(Figura C)
OFF
HI
(Figura D)
(Figura E)
(Figura B)
OFF
HI
(Figura A)
OFF
HI
-
4
Scion xB 2004-2007
Desmontaje del tablero 99-8209
1. Jalehaciaafueralas(3)perillasdecontroldeclimayquítelas.(FiguraA)
2. Quitelos(2)tornillosPhillipsdelapartedeatrásdelasperillasexteriores(2).(FiguraB)
3. Suelteapresiónyquitetodoelpanelquerodeaelradioyloscontrolesdelclimayaireacondicionado.(FiguraC)
4. Quitelos(4)pernosde10mmquesostienenelradio.Desconecteyquiteelradio.
Continuará al ensamble del kit
OFF
HI
OFF
HI
OFF
HI
(Figura A)
(Figura B)
(Figura C)
-
5
Scion xB 2008 y más recientes
Desmontaje del tablero 99-8209
1. Desengancheyquiteelpaneldemolduraquerodeaelradio,incluyendolasrejillasdelaireacondicionado.(FiguraA)
2. Desengancheyquiteelpaneldemolduradelbordeinferiordelacavidaddeltablero.(FiguraA)
3. Quitelos(4)pernosde10mmquesostienenelradio.Desconecteyquiteelradio.(FiguraB)
Continuará al ensamble del kit (Figura A)
(Figura B)
-
6
Scion tC 2005-2010
Desmontaje del tablero 99-8209
1. Suelteapresiónlamolduraquerodealapalancadevelocidades(noesnecesarioquitarlaporcompleto).(FiguraA)
2. Suelteapresiónyquiteelpanelquerodeaelradio,incluyendoloscontrolesdelclimaylapuertadelradio.(FiguraB)
3. Quite(2)tuercasde10mmdelasubicacionessuperioresdemontajey(2)tornillosPhillipsdelasubicacionesinferioresdemontajeyquiteelradio.(FiguraC)
Continuará al ensamble del kit
(Figura A)
(Figura B)
(Figura C)
-
7
Scion xD 2008 y más recientes
Desmontaje del tablero 99-8209
1. Desengancheelpaneldemolduradelradio.Desconecteyretireelpanel. (FiguraA)
2. Retirelos(4)tornillosPhillipsquesostienenelradio.Desconecteyretireelradio.(FiguraB)
3. Quitelossoportesdefábricadelradio.Guardelossoportesparausarlosalensamblarelkit.(FiguraC)
Continuará al ensamble del kit(Figura A)
(Figura B)
(Figura C)
-
8
Provisión de radio DIN con bolsillo
Ensamble del kit 99-8209
1. Deslicelossoportesdemontajesobrelosladosdelacarcasadel radiohastaqueseenganchenlosganchoslaterales. (FiguraA)
Nota: Use el conjunto de soportes 1 para xA, xB y tC. Use el conjunto de soportes 2 para el xB y xD 2008 y más recientes.
2. Paraelconjuntodesoportes 1,corteyquitetodaslaspestañasdemontaje,exceptolaspestañasqueseusenparasuaplicación.(FiguraB)
Nota:Las pestañas están marcadas xA, xB y tC. Para el conjunto de soportes 2, pase al paso 3.
3. DeslicelarejaDINenlacarcasadelradioysujételadoblandohaciaafueralaspestañasdemetal.(FiguraC)
4. Desliceelradiodemercadosecundarioenlarejahastaqueentreapresión.(FiguraD)
5. Ubiqueelarnésdelcableadodefábricaeneltablero.MetrarecomiendausareladaptadordeacoplamientoadecuadodeMetraoAXXESS.Vuelvaaconectarelterminalnegativodelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.
6. Vuelvaamontareltableroenformainversaaldesmontaje.
(Figura B)
(Figura C)
(Figura D)
(Figura A)
soportes 1
ganchos laterales
-
9
Provisión de radio de montaje ISOcon bolsillo
Ensamble del kit 99-8209
1. Deslicelossoportesdemontajesobrelosladosdelacarcasadel radiohastaqueseenganchenlosganchoslaterales. (FiguraA)
Nota: Use el conjunto de soportes 1 para xA, xB y tC. Use el conjunto de soportes 2 para el xB y xD 2008 y más recientes.
2. Paraelconjuntodesoportes 1,corteyquitetodaslaspestañasdemontaje,exceptolaspestañasqueseusenparasuaplicación.(FiguraB)
Nota:Las pestañas están marcadas xA, xB y tC. Para el conjunto de soportes 2, pase al paso 3.
3. MontelossoportesISOenelradioconlostornillosquevienenconelradio.(FiguraC)
4. Desliceelradioenlacarcasahastaqueentreapresión.(FiguraD)
5. Coloqueapresiónlaplacadelamolduraalfrentedelacarcasadelradio.(FiguraD)
6. Ubiqueelarnésdelcableadodefábricaeneltablero.MetrarecomiendausareladaptadordeacoplamientoadecuadodeMetraoAXXESS.Vuelvaaconectarelterminalnegativodelabateríaypruebelaunidadparaverificarquefuncionecorrectamente.
7. Vuelvaamontareltableroenformainversaaldesmontaje.
(Figura B)
(Figura C)
(Figura D)
(Figura A)
soportes 1
ganchos laterales
-
Notas
-
Notas
-
METRA. THE WORLD’S BEST KITS.™
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION 1-800-221-0932 metraonline.com
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-8209
REV.
3/2
1/12