anping no.1 welded mesh factory
TRANSCRIPT
Anping No.1 Welded Mesh Factory
Anping No.1 Welded Mesh Panels Factory which is located in "Chinese Mesh and Netting County"—Anping which is professionally engaged in the production and sale of all kinds of meshes and nettings. Our corporation has gotten the believes and supports of clients at home and abroad since it was founded over ten years ago ."Providing the fine mesh and netting, creating the famous brand of the line" is our invariable aim.
Our company has owned all kinds of weaving netting machines of over 160 sets and staff members of over 100 at present and developed metal wire mesh products of "NO.1" brand series through the management and development of many years.
We have become the famous brand of Chinese metal wire mesh and one of the largest exporters in Chinese mesh and netting circle . Our products sell well to more than 30 provinces in China and also export to Europe, America, East Asia, South Asia, Middle East and Africa etc more than 20 countries and regions.
Our company is mainly engaged in the production and sale of mesh and netting products including the General Welded Wire Mesh Panels, Reinforcing Mesh, Floor Heating Mesh, PVC
Coated Welded Mesh Panel, Stainless Steel Wire Mesh Panels, Galvanized Wire Mesh Panels, Wire Fence Panels, PVC Coated Welded Mesh and Stainless Steel Welded Mesh. We'll build and develop the co-operation relations of new and old friends at home and abroad continuously for " No.1 Welded Mesh Panels" being deeply remembered by users by our multifunction and all-sided service system.
You may refer to the introduction of the following about the main item and the detailed data of products.
Contact Us
ADD: 10 Chengming Street, Hengshui, Hebei, China.
TEL: +86 318 57865437
E-MAIL: [email protected]
URL: Http://Www.Weldedwiremeshpanel.Com
3D Panel
3D panel, a new wire mesh product, is mainly used in
construction. High tensile and easy installation make 3d wire mesh panels become very popular
according to our construction customers both at home and abroad.
3d Panel, also called double layer Welded Wire Panel, joins two pieces of welded wire panel together
through welding method. The side panel mesh is commonly 2" opening with 11 or 12 gauge wire,
surface with galvanized wire panel or hot dip galvanized wire panel. Inserted EPS size is 2", 2.5" and 4".
Components of the installed panel include:
Foam core for insulation.
Wire mesh on inside and outside.
Welded truss of wire cross pieces.
Sprayed concrete on both sides ("shotcrete").
Benefits of 3D Panel: Thermal Insulation, Fireproofing, Moisture proofing , Soundproofing, Lightweight ,
Economical Efficiency , Shortening of Construction Time.
3D panel uses: These panels are 4 feet wide and come in almost any length. They can be used for the
walls, roof, floor, and so on.
Wire Fence Panel
Wire Fence Panel can be made
of superior quality welded mesh, electro galvanized, hot-dipped galvanized or plastic coated. It is also
supplied in plain steel without galvanizing to save cost.
The wire fabric is made up of steel wires arranged in parallel fashion in two orthogonal directions, with
the points of contact being welded between the wires by electrical welding process (spot welding) by
welding machine.
The raw material for the manufacture of panels is the wire through cold rolling or by wire drawing using
the hot-rolled wire produced in the steelworks.
Wire Fence Panel have the features of corrosion resistance, aging resistance, sunlight resistance and
weather resistance.
The Panels are determined by several data:
Wire Diameter;
Surface Treatment;
Tensile Breaking Strength;
Elongation;
Panel Length and Width
Some Standard Panel Sizes:
1.5mm Wire Diameter, 1/2" X 1/2" Mesh Opening;
2mm Wire Diameter, 1" X 1" Mesh Opening;
3mm Wire Diameter, 1" X 1" Mesh Opening;
3mm Wire Diameter, 1-1/4" X 1-1/4" Mesh Opening;
4mm Wire Diameter, 1-1/2" X 1-1/2" Mesh Opening;
2mm Wire Diameter, 2" X 2" Mesh Opening;
3mm Wire Diameter, 2" X 2" Mesh Opening;
4mm Wire Diameter, 2" X 2" Mesh Opening;
5mm Wire Diameter, 2" X 2" Mesh Opening;
6mm Wire Diameter, 4" X 2" Mesh Opening;
Special sizes can be custom made.
Applications: Welded steel bar grating panels are widely used in construction reinforcement, the ground
for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
Wire Fence Panel are utilized as guards in buildings and factories, as animal enclosure and fence in
agriculture; it is also used in horticulture industry as tree guards, plant protection.
Reinforcing Mesh
Reinforcing Mesh is used for the reinforcement of concrete, is manufactured to SANS 1024:2006 and to other international standard specifications.
Features
o Reinforcing Mesh mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction and concrete surface beds. Other designed applications include: Retaining and shear wallso Beams and columnso Concrete paving overlayso Precast concrete elementso Buildings project o Swimming pool and gunite construction
Reinforcing Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements
Reinforcing Mesh reinforcement considerably reduces construction time SANS 1024:2006 designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape codes. (The reference is the nominal mass of the fabric in kg/m2 x 100). The cold-rolled deformed wire used in welded mesh fabric has a characteristic strength (0.2% proof stress) a minimum of 485MPa compared to 450MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of up to 8%.
Important design criteria
Placing of FabricIn order to obtain the best results when using fabric reinforcement, special care must be taken to ensure that the mesh is positioned and maintained at the correct depth after the concrete pour. This can be done by using stools or plastic or
concrete spacers. Another option is to place
the fabric on poured concrete that has been leveled to the desired reinforcement depth. After placing the mesh the concrete can be topped up to the specified overall slab thickness.Ideally fabric must be located 50mm from the top of the slab and where bottom steel is required,, it must also be supported 50mm above the substrate.
Lapping of Fabric MatsIt is recommended that in calculating the lap requirement for surface bed welded mesh fabric reinforcement that the formula shall be 25 x diameter + 150mm or 300mm, whichever is the greatest.
QualityThe Reinforcing Mesh is manufactured under strict quality controls with all standards conforming to SANS 1024:2006 standard specifications and tolerances and carries the certification mark.
Fabric
Mesh Size Nominal
Pitch of wireWire Sizes
Cross Sectional
area/m width
Nominalmass/m2
Ref No.
Main mm
Cross mm
Main mm
Cross mm
Main mm
Cross mm
KgSupplied
inSquare MeshFabric
888 200 200 12 12 566 566 8.88 Sheetsonly
6m x 2.4m746 200 200 11 11 475 475 7.46617 200 200 10 10 393 393 6.17
500 200 200 9 9 318 318 5.00395 200 200 8 8 251 251 3.95311 200 200 7.1 7.1 198 198 3.11245 200 200 6.3 6.3 156 156 2.45193 200 200 5.6 5.6 123 123 1.93 Sheets or
rolls100 200 200 4 4 63 63 1.00Design MeshFabric
1085 100 200 12 8 1131 251 10.85
Sheets only
6m x 2.4m
943 100 200 11 8 951 251 9.43772 100 200 10 7.1 786 198 7.72655 100 200 9 7.1 636 198 6.55517 100 200 8 6.3 503 156 5.17433 100 200 7.1 6.3 396 156 4.33341 100 200 6.3 5.6 312 123 3.41289 100 200 5.6 5.6 246 123 2.89
LongitudinalMesh Fabric
278 100 300 6.3 4 312 42 2.78 Sheets only
6m x 2.4m226 100 300 5.6 4 246 42 2.26
133 100 300 4 4 126 42 1.33 Sheets or rolls
60m x 2.4m
Special Mesh
200 100 100 4 4 126 126 2.00
156 100 100 3.55 3.55 99 99 1.56
Structural fabric reinforcement design dataCross sectional areas at various spacing mm2/m, mass at various spacing kg/m2
DIAmm
Areamm2
Masskg/m
Wire Spacing mm
50 75 100 125 150 175 200 225 250 275 300 DIA
12113.11 2262 1508 1131 905 754 646 566 503 452 411 377
12 0.888 17.76 11.84 8.88 7.1 5.92 5.07 4.44 3.95 3.55 3.23 2.96
1195.05 1901 1267 950 760 634 583 475 422 380 346 317
11 0.746 14.92 9.95 7.46 5.97 4.97 4.26 3.73 3.32 2.98 2.71 2.49
1078.55 1571 1047 786 628 524 449 393 349 314 286 262
10 0.617 12.34 8.23 6.17 4.94 4.11 3.53 3.09 2.74 2.47 2.24 2.06
963.63 1273 848 636 509 424 364 318 283 255 231 212
9 0.500 9.99 6.67 4.99 3.99 3.33 2.86 2.5 2.22 2.00 1.82 1.67
850.27 1005 670 503 402 335 287 251 223 201 183 168
8 0.395 7.9 5.27 3.95 3.16 2.63 2.26 1.98 1.76 1.58 1.44 1.32
7.1 39.6 792 528 396 317 264 226 198 176 158 144 132 7.1
0.311 6.22 4.15 3.11 2.49 2.07 1.78 1.56 1.38 1.24 1.13 1.04
6.331.18 624 416 312 249 208 178 156 139 125 113 104
6.3 0.245 4.9 3.27 2.45 1.96 1.63 1.40 1.23 1.09 0.98 0.89 0.82
5.624.63 493 328 246 197 164 141 123 109 99 90 82
5.6 0.193 3.86 2.57 1.93 1.54 1.29 1.11 0.97 0.86 0.78 0.71 0.64
412.57 251 168 126 101 84 72 63 56 50 46 42
4 0.099 1.98 1.33 1 0.8 0.67 0.57 0.5 0.44 0.4 0.36 0.33
Welding Bird Cages
We can serve variety of Live Animal Traps for the majority of customers. Include bird cage, dog cage,
and the other animal cages. You definitely want to find a
comfortable environment for your pet. We can design the cage according to the pet feather or size even
feeding.
Bird cages made of welded wire have flat form, uniform opening and beautiful outlook. It is used for
fencing birds and small animals, etc.
Welding Wire bird cages Materials:
* Galvanized iron;
* Plastic coated;
* Stainless Steel.
Sizes and treatment: According to your specific requirements
Can provide three ranges sizes:
* Small size: 18L x 24W x 18H inches
* Medium size: Medium sized birds need cages that are a very minimum of 24L x 24W x 24H with bar
spacing between .50 to .75 inch.
* Large size: Minimum birdcage size of 36L x 36W x 48H with 1 to 1.5-inch spacing between the bars.
Notes: L-length, W-width, H-high.
Welded Gabion Mesh
Our factory also can provide a variety of types welded gabion mesh. Gabion is an element in the form
of blocks made of steel wire mesh, welded or woven, having hexagonal opening, square or rectangular
openings. Welded gabion meshes are in the shape of block or regular cube size.
These special wire bins are made of robust wire, filled with the vibrations at the quarry and transport are
accompanied by the lifting straps.
Welded Gabion meshes forms:
It includes welded gabion box, welded gabion basket, mattress, and the others. They are mainly used in
building blocks of gravity walls, soil retaining wall, gravity wall and reinforced structures.
This mesh Specific Applications:
* Strengthening the slopes;
* Gabion retaining walls used for their flexibility, robustness and high drainage capacity;
* Geotechnical condition assembling;
* The expansion or construction of roads on the slopes;
* Construction of railway embankments;
* Rivers banks protecting;
* Other places.
Surface Treatment: Galvanized welded wire, Stainless Steel Wire Mesh
Welded gabion mesh common Specifications:
Welded gabion mesh
Specification in Meters Diaphragms Capacity cu. meters
0.5 x 0.5 x 0.5 0 1.125
1 x 0.5 x 0.5 0 1.25
1 x 1 x 0.5 0 .5
1 x 1 x 1 0 1
1.5 x .5 x .5 0 1.325
1.5 x 1 x .5 0 1.75
1.5 x 1 x 1 0 1.5
2 x 0.5 x 0.5 1 1.5
2 x 1 x 0.5 1 1
2 x 1 x 1 1 2
3 x 2 x 0.3 (Mattress) 3 1.8
Sets of gabion steps 1m or 2m wide
Specific specifications can be made for your requirements.