www.apmwiremeshmachine.com. hebei metal enterprise co., ltd. formerly known as anping yilian wire...
TRANSCRIPT
www.apmwiremeshmachine.com
Wire Drawing Machine
Welcome to visit our factory
www.apmwiremeshmachine.com
Hebei Metal Enterprise Co., Ltd. Formerly known as Anping Yilian Wire Mesh Machinery Factory .Yilian was established in 1995 by Mr. Duan. Our Machine won high praise all over China and ourfactory begin to think about entering into the international market.
In 2003,with the police of “Going out ” ,wire mesh exporting also reaches its climax!, in 2004, aftera series of founds, equipment's, workers etc. investments, Hebei Metal Enterprise Co., Ltd was established and started the exporting of wire mesh machinery worldwide. Till 2012,Metal has developed into a company with 3 engineers, 70production line workers, 25 production assembly workers, 5 after-sale maintenance personals.
With International quality management system certificate ISO9001: 2008 and CE certificate provident and our professional quality control worker’s effort, our products have been exported to morethan 30 countries and regions, such as the United States, canada, Russia, Uzbekistan, Azerbaijan,Turkey, Iran India, Brazil, Pakistan, Saudi Arabia, Jordan etc.
Our factory is about 300 km away from Beijing and Tianjin, and you are welcomed to visit our factory anytime.
About us
www.apmwiremeshmachine.com
Through Wire Drawing Die
Drawing
Take Down Wire
Wire
WirePointer
Rust
Productive progress
Removal
1
2
3
4
5
6
www.apmwiremeshmachine.com
Type 650 500 400 350Wire Dia. (mm) ﹥ф12 ﹥ф10 ﹥ф8 ﹥ф6.5
Coiling Block Outside Dia. (mm) ф600 ф500 ф400 ф350
Speed (Turn/Minute) 25 25 25 25
Motor (Kw) 22 17 13 10Voltage (V) 380 380 380 380
Weight (Kg) 2300 1300 1100 850
1.Power : With Jiang Sheng motor, low energy consumption, good stability and adopt to long hours work need.
2.Speed control system: GB horizontal Reducer, operation is convenient and more Safety.
3.Structure: Integrated design and no need to install ,There will not break wire and stable quality.
4. Control: With the world's most state-of-the-art electronic control system, can be Evitable overload, under load, lack of phase, short circuit, overheat protection.
5.Traction roll: with special high-strength wire drawing machine and cold-rolled ribbed steel bar production line the traction reel.
Horizontal Type Wire Drawing Machine
www.apmwiremeshmachine.com
Coiling Block No. 5 4 3
Coiling Block Outside Dia. (mm) 300/550 300/550 300/550
Max. Inlet Wire Dia.(mm) 6.5 6.5 6.5
Min. Outlet Wire Dia.( (mm) 2 3.8-2 2
Molds (Piece) 5 4 3
Speed (m/min) 216 120-160 120-160
Motor (KW) 37.5 44kw 34.5
Lubrication Method Drawing Powder
Wheel Type Wire Drawing Machine
This machine is suitable drawing wire like low/high carbon wire, copper wire, aluminum wire etc.
The finish wire is mainly used for weaving, construction, galvanized, and can also supply water tank wire drawing machine to drawing thin wire.
Transmission system: the machine by multiple reel separately with horizontal engine with V-belt drive.
Drawing process at once, so the production of high-efficiency, low-cost, simple operation and management. In order to meet the needs of users.
Our factory can be equipped with a single, or even two, even three, even five whole composed.
www.apmwiremeshmachine.com
Type WT - X WT - Z
Max. Inlet Wire Dia.(mm) 2.0 0.70
Min. Outlet Wire Dia. (mm) 0.65 0.13
Coiling Block Outside Dia. (mm) 280-600 160-180
Speed (Turn/Minute) 276-380 460
Motor (Kw) 13.2 3
Molds (Piece) 10-13 22
Lubrication Method Water Water
Water Tank Wire Drawing Machine
WT - X WT - Z
This machine is suitable drawing wire like low/high carbon wire, copper wire, aluminum wire etc.
Drawing die immersed in the saponification solution direct cooling; V-belt drive with a combination of dedicated gearbox or gear, control sub-ordinary control, frequency control, soft start control.
Put into low-cost, small footprint, reduces operator (single).
www.apmwiremeshmachine.com
Type LW1-8/600 LW1-10/560 LW1-9/450
Coiling Block Outside Dia. (mm) 600(650) 560 450
Max. Inlet Wire Dia.(mm) 6.5-8 6.5 3.6
Min. Outlet Wire Dia.( (mm) 2.0-3.0 1.8 1.1
Speed (m/Minute) 300 400 400Motor (Kw) 15-11 11-7.5 7.5Weight (Kg) 3000 2500 2000
Outsize (mm) 2000×1200×2650 1700×1100×2495 1520×820×2250
Pulley Type Wire Mesh Machine
The machine consists of multiple stand-alone drawing cans with PLC program control, inverter frequency control.
The machine can be drawing low/high carbon wire, aluminum wire, copper wire and other metal wire.
This machine mainly composed of reel device bridge device, drawing die box pulley device, cooling device, protective cover and rack structural components.
With ZG45 tungsten carbide brushed reel surface do mirror polished, not only hard wear and does not damage the wire surface.
www.apmwiremeshmachine.com
Butt welding machine Point rolling machineElectric Control box
Auxiliary Machine
www.apmwiremeshmachine.com
Wire Drawing Machine
Welcome to visit our factory
Hebei Metal Enterprise Co.,LtdTel: +86-311-66792197 Fax: +86-311-66792192Email: [email protected] [email protected]:www.apmwiremesh.com