annexure a : approved torenvironmentclearance.nic.in/writereaddata/online/... ·...
TRANSCRIPT
ANNEXURE A : APPROVED ToR
No.IA-J-11011/523/2017-IA-II(I)
Goverment of India
Minister of Enviroment,Forest and Climate Change
Impact Assessment Division
***
Indira Paryavaran Bhavan,
Vayu Wing,3rd Floor,Aliganj,
Jor Bagh Road,New Delhi-110003
04 Mar 2018
To,
M/s SUN PETROCHEMICALS PRIVATE LIMITED
17/B, Mahal Industrial Estate, Mahakali Caves Road,
Mumbai (Suburban)-400093
Maharashtra
Tel.No.22-66455925; Email:[email protected]
Sir/Madam,
This has reference to the proposal submitted in the Ministry of Environment, Forest
and Climate Change to prescribe the Terms of Reference (TOR) for undertaking detailed EIA
study for the purpose of obtaining Environmental Clearance in accordance with the provisions of
the EIA Notification, 2006. For this purpose, the proponent had submitted online information in the
prescribed format (Form-1 ) along with a Pre-feasibility Report. The details of the proposal are
given below:
1. Proposal No.: IA/GJ/IND2/69768/2017
2. Name of the Proposal:
Exploration and Development of drilling wells in
the existing PML area (PML12.7 sq.km) of
Modhera Field at Village Matresan, Tehsil
Becharaji, District Mehsana, Gujarat
3. Category of the Proposal: Industrial Projects - 2
4. Project/Activity applied for: 1(b) Offshore and onshore oil and gas
exploration, development & production
5. Date of submission for TOR: 30 Jan 2018
In this regard, under the provisions of the EIA Notification 2006 as amended, the Standard TOR
for the purpose of preparing environment impact assessment report and environment
management plan for obtaining prior environment clearance is prescribed with public consultation
as follows:
STANDARD TERMS OF REFERENCE (TOR) FOR EIA/EMP REPORT FOR PROJECTS/ACTIVITIES REQUIRING ENVIRONMENT CLEARANCE
1(b):STANDARD TERMS OF REFERENCE FOR CONDUCTING
ENVIRONMENT IMPACT ASSESSMENT STUDY FOR OFFSHORE AND ONSHORE OIL AND GAS EXPLORATION, DEVELOPMENT AND PRODUCTION PROJECTS AND INFORMATION TO BE INCLUDED IN EIA/EMP REPORT
B . STANDARD TOR FOR ONSHORE OIL AND GAS EXPLORATION, DEVELOPMENT
& PRODUCTION
1. Executive summary of a project.
2. Project description, project objectives and project benefits.
3. Cost of project and period of completion.
4. Site details within 1 km of the each proposed well, any habitation, any other installation/activity, flora and fauna, approachability to site, other activities including agriculture/land, satellite imagery for 10 km area. All the geological details shall be mentioned in the Topo sheet of 1:40000 scale, superimposing the well locations and other structures of the projects. Topography of the project site.
5. Details of sensitive areas such as National Park, Wildlife sanctuary and any other eco-sensitive area alongwith map indicating distance.
6. Approval for the forest land from the State/Central Govt. under Forest (Conservation) Act, 1980, if applicable.
7. Recommendation of SCZMA/CRZ clearance as per CRZ Notification dated 6th January, 2011 ( if applicable).
8. Distance from nearby critically/severely polluted area as per Notification, if applicable. Status of moratorium imposed on the area.
9. Does proposal involve rehabilitation and resettlement? If yes, details thereof.
10. Environmental considerations in the selection of the drilling locations for which environmental clearance is being sought. Present any analysis suggested for minimizing the foot print giving details of drilling and development options considered.
11. Baseline data collection for air, water and soil for one season leaving the monsoon season in an area of 10 km radius with centre of Oil Field as its centre covering the area of all proposed drilling wells.
12. Climatology and Meteorology including wind speed, wind direction, temperature rainfall relative humidity etc.
13. Details of Ambient Air Quality monitoring at 8 locations for PM2.5, PM10, SO2, NOx, CO, VOCs, Methane and non-methane HC.
14. Soil sample analysis (physical and chemical properties) at the areas located at 5 locations.
15. Ground and surface water quality in the vicinity of the proposed wells site.
1
STANDARD TERMS OF REFERENCE (TOR) FOR EIA/EMP REPORT FOR PROJECTS/ ACTIVITIES REQUIRING ENVIRONMENT CLEARANCE
16. Measurement of Noise levels within 1 km radius of the proposed wells.
17. Vegetation and land use; flora/fauna in the block area with details of endangered species, if any.
18. Incremental GLC as a result of DG set operation, flaring etc.
19. Potential environmental impact envisaged during various stages of project activities such as site activation, development, operation/ maintenance and decommissioning.
20. Actual source of water and 'Permission' for the drawl of water from the Competent Authority. Detailed water balance, wastewater generation and discharge.
21. Noise abatement measures and measures to minimize disturbance due to light and visual intrusions.
22. Details on wastewater generation, treatment and utilization /discharge for produced water/ formation water, cooling waters, other wastewaters, etc. duringallprojectphases.
23. Details on solid waste management for drill cuttings, drilling mud and oil sludge, produced sand, radio activematerials, other hazardous materials, etc. including its disposal options during all project phases.
24. Disposal of spent oil and lube.
25. Storage of chemicals and diesel at site. Hazardous material usage, storage and accounting.
26. Commitment for the use of water based mud (WBM) only
27. Oil spill emergency plans for recovery/ reclamation.
28. H2S emissions control.
29. Produced oil/gas handling, processing and storage/transportation.
30. Details of control of air, water and noise pollution during production phase.
31. Measures to protect ground water and shallow aquifers from contamination.
32. Whether any burn pits being utilised for well test operations.
33. Risk assessment and disaster management plan for independent reviews of well designed construction etc. for prevention of blow out. Blowout preventer installation.
34. Environmental management plan.
35. Total capital and recurring cost for environmental control measures.
36. Emergency preparedness plan.
37. Decommissioning and restoration plans.
38. Documentary proof of membership of common disposal facilities, if any.
39. Details of environmental and safety related documentation within the company including documentation and proposed occupational health and safety Surveillance Safety Programme for all personnel at site. This shall also include monitoring programme for the environmental.
40. A copy of Corporate Environment Policy of the company as per the Ministry's O.M. No. J-11013/ 41/2006-IA.II(I) dated 26th April, 2011 available on the Ministry's website.
41. Any litigation pending against the project and or any direction/order passed by any court of law against the project. If so details thereof.
***
2
ANNEXURE B : PRODUCTION SHARING CONTRACT
ANNEXURE C : PETROLEUM MINING LEASE
ANNEXURE D : ENVIRONMENTAL CLEARANCE GRANTED IN 2010
ANNEXURE E : TRANSFER OF ENVIRONMENTAL CLEARANCE
ANNEXURE F : TRANSFER LETTER ISSUED BY MoPNG FOR ASSIGNMENT OF EXPLORATION PRODUCTION DEVELOPMENT AND SALE OF PRODUCTS
ANNEXURE G : QCI/NABET CERTIFICATE OF CONSULTANT
ANNEXURE H : NABL CERTIFICATE OF LAB
.s\'lu;'/zffi2,, ffi>K
lT6BL
National Accreditation Board forTesting and Galibration Laboratories(A Constituent Board of Quality Council of lndia) Q
QCI
CERTIFICATE OF ACCREDITATION
MANTEC ENVIRONMENTAL LABORATORY
has been assessed and accredited in accordance with the standard
IS0IEC 17025:2005
"General Requirements for tk Competence of Testing & Calibration Laboratoriesrl
for its facilities at
D-36, Sector-06, Noida, Gautam Budh Nagar, Uttar Pradesh
in the field of
TESTING
Certificate Number TC-6440 (in tieu of T-1477)
Issue Date LLrcgDOtT Valid Until LOT1DOL1
This certificate remains valid for the Scope of Accreditation as specified in the annexure subject tocontinued satisfactory compliance to the above standard & the relevant requirements of NABL.
(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)
Signed for and on behalf of NABL
AJ-yt-N. VenkateswaranProgram Director
Anil Relia
Chief Executive Officer8907 6970 100030000603
n68t
s'lV;',.ilffi''i"-ffi,,S..
National Accreditation Board forTesting and Galibration Laboratories(A Constituent Board of Quality Council of lndia)
SCOPE OF ACCREDITATION
u,rtffi%,
QCI
Laboratory
Accreditation Standard
Certificate Number
Validity
Mantec Environmental Laboratory, D-36, Sector-06, Noida, GautamBudh Nagar, Uttar Pradesh
ISO/IEC 17025:2005
TC-6440 (n tieu of T-1417)
1 1.09.2017 to 1 0.09.201 9
Page 1 of4
Last Amended on 17.10.2017
Specific TestPerformed
Test Method Specificationagainst which tests are
Can d 6 6f T6-siffi a, i----- i
Limits of Detection i
CHEMICAL TESTING
4*Rozina
ConvenorN. VenkateswaranProgram Director
Product / Materialof Test
l. ATMOSPHERIC POLLUTION
1. Ambient Air Respirable ParticulateMatter/ PM 10
CPCB/NAAQMS/2512003-O4/JULY/|S 5182 (Part 23)
05 pg/m"to 1000
Suspended ParticulateMatter
lS 5182 (Part 4):2005 05 pg/m'to1000 pg/m
Sulphur Dioxide lS 5182 (Parl2\:2001 04 uq/m'to 1050 uq/m'Nitrogen Dioxide lS 5182 (Part 6): 2006 06 pg/m'to 750 pg/m'Ammonia CPCB Guidelines,Vol-1
(May 2011y MEL/SOP /lssue No. 01 & lssue Date18_10.2014
I [ii7m31dT6od lrsiin3-
Ozone lS 5182 (Part 9)Chemical Method
10 pg/m'to 2000 pg/m"
Carbon Mono-oxide NDIR Method lS 5182(Part 10): 1999 (RA 2003)
0 to 200 ppm
Particulate Matter 2.5 CPCB Guidelines,Vol-l (May 2011)
03 pg/m'to1000;lg/m'
2. Ambient Noise Noise Levels Leq lS 9876:1981 34 dB(A) to 134 dB(A)
ll. WATER
1. Drinking Water,Surface Water,Ground Water
pH lS 3025 (Part I 1): 1983(RA 2012)
4 to 10
Conductivity lS 3025 (Part 14): 1984(RA 2013)
2 pmhos/cm to
?_oQQ uronq{cmAlkalinity lS 3025 (Part 23): 1986
(RA 2014)I mgilto 1000 mg/l
Chloride lS 3025 (Part 32): 1988(RA 2014)
2 mgll to 1500 mg/l
;t.
National Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of lndia)
SCOPE OF ACCREDITATION
Mantec Environmental Laboratory, D-36, Sector-06, Noida, GautamBudh Nagar, Uttar Pradesh
,r'-ffi.i-:; o"+3
QCI
Laboratory
Accreditation Standard
Certificate Number
Validity
ISO/IEC 17025:2005
TC-6440 fin tieu of T-1417)
11.09.2017 to 1 0.09.201 9
Page 2 of 4
Last Amended on 17.10.2017
Test Method Specificationagainst which tests are
Range of Testing /Limits of Detection
Product / Materialof Test
Total Hardness lS 3025 (Part21): 2009(RA 2014)
1 mg/lto'!000 mg/l
Total Dissolved Solid lS 3025 (Part 15): 1984(RA 2014)
1 mg/lto 5000 mg/l
Sodium lS 3025 (Part 45): 1993(RA 2014) FlamePhotometer
1 to 50 mg/l
Potassium lS 3025 (Part 45): 1993Flame Photometer(RA 2014)
1 mg/lto 50 mg/l
Sulphate lS 3025 (Part 24): 1986(RA 2014)
1 mg/lto100 mg/l
Phosphate lS 3025 (Part-31):1988(RA 2014)
0.1 mg/lto 50 mg/l
Nitrogen lS 3025 (Part 34):1988(RA 2014)
1 mg/lto 50 mg/l
Temperature'C lS 3025 (Part 9): 1984(RA 2006)
Ambient to 50
Dissolved Oxygen lS 3025 (Part 38): 1989(RA 2014)
0.1 to't0 mg/l
Colour lS 3025 (Part 4): 1883(RA 2012)
1 Hazen to 5000 Hazen
Turbidity lS 3025 (Part 10): 1984(RA 2014)
1 NTU to 1000 NTU
Calcium lS 3025 (Part 40): 1991(RA ?q:LO
1 mg/lto 1000 mg/l
Magnesium lS 3025 (Part 46): '1994
(RA 2014)1 mg/lto 1000 mg/l
Nitrite Nitrogen(NOr-N)
lS 3025 (Part 34): 1988(RA 2009)
0.01 mg/lto 2000 mg/l
Colour lS 3025 (Part 4): 1983(RA 201 2)
l Hazen to 500 Hazen
Turbidity lS 3025 (Part 10): 1984(RA 2014)
1 NTU to lOOO NTU
,r'/,'v<-P-
naGonvenor
N. VenkateswaranProgram Director
ir. Specific TestPerformed
s'lV;'zilffi'.i,m,,s.
National Accreditation Board forTesting and Galibration Laboratories(A Constituent Board of Quality Council of lndia)
SCOPE OF ACCREDITATION
Mantec Environmental Laboratory, D-36, Sector-06, Noida, GautamBudh Nagar, Uttar Pradesh
Laboratory
Accreditation Standard
Certificate Number
Validity
ISO/IEC 17025:2005
TC-6440 (n tieu of r-1417)
11.09.2017 to 1 0.09.2019
Page 3 of 4
Last Amended on 17.10.2017
l/!/<-VN. VenkateswaranProgram Director
dna
Convenor
Product / Materialof Test
Test Method Specificationagainst which tests are
Range of Testing /Limits of Detection
Calcium lS 3025 (Part 4): 1991(RA 2014)
1 mg/lto 1000 mg/l
Magnesium lS 3025 (Part 46): 1994(RA 2014)
1 mg/lto 1000 mg/l
Free ResidualChlorine lS 3025 (Part 26): 1988 Q.l rnsl!tpl9_ru11Anionic detergents Annex K of
ls 13428 (RA 2014)0.05 mg/l to 50 mg/l
Fluoride lS 3025 (Part 60): 2008(RA 2013)
0.02 mg/lto 20 mg/l
Silica lS 3025 (Part 35): 1988(RA 2014)
0.1 mg/lto 50 mg/l
Boron lS 3025 (Part 57): 2005(RA 2010)
0.02 mg/lto 10 mg/l
Phenolic Compounds 1992lS 3025 (Part 43): 0.00'1 mg/lto 50 mg/l
Manganese lS 3025 (Part 59): 2006(RA 2012)
0.01 mg/lto 20 mg/l
Hexavalent Chromium lS 3025 (Part 52): 2003(RA 2014)
0.01 mg/lto 10 mg/l
Mercury lS 3025 (Part 48): 1994(RA 2014)
0.01 mg/lto 10 mg/l
lron lS 3025 (Part 53): 2003(RA 2014)
0.01 mg/lto 20 mg/l
2. Waste Water pH lS 3025 (Part-1 1 ): 1983(RA 2012)
2to 12
Alkalinity lS 3025 (Part 23):1986(RA 2014)
'l mg/lto 1000 mg/l
Total Dissolved Solid lS 3025 (Part 15):1984(RA 2014)
1 mg/lto 5000 mg/l
Chemical OxygenDemand
lS 3025 (Part 58): 2006(RA 2012)
50 mg/lto 5000 mg/l
Sodium lS 3025 (Part 45): 1993(RA 2014) FlamePhotometer
1 mg/lto 100 mg/l
il. Specific TestPerformed
s.\'lV7z;\\V':,ffir,.i,mN.National Accreditation Board forTesting and Calibration Laboratories(A Constituent Board of Quality Council of lndia)
,ffi8=,.M€QCI
SCOPE OF ACCREDITATION
Laboratory
Accreditation Standard
Certificate Number
Validity
Mantec Environmental Laboratory,Budh Nagar, Uttar Pradesh
ISO/IEC 17025:2005
TC-6440 fin tieu of T-1417)
11.09.2017 to 1 0.09.2019
D-36, Sector-06, Noida, Gautam
Page 4 of 4
Last Amended on 17.10.2017
ConvenorN. VenkateswaranProgram Director
Specific Test i Test Method SpecificationPerformed i against which tests are
Range of Testing /Limits of Detection
Potassium lS 3025 (Part 45): 1993(RA 2014) FlamePhotometer
1 mg/lto 100 mg/l
Sulphate lS 3025 (Part 24): 1986(RA 2014)
1 mg/lto 100 mg/l
Phosphate lS 3025 (Part 31): 1988(RA 2014)
0.1 mg/lto 25 mg/l
Nitrate lS 3025 (Part 34): 1988(RA 2014)
1 mg/lto 100 mg/l
.-A-s-Lditv-------- lS 3025 (Part.22\:2003 1 mq/lto 100 mo/lTemperature'C lS 3025 (Part 9): 1984
(RA 2006)Ambient to 60
Dissolved Oxygen lS 3025 (Part 38): 1989(RA 2014)
0.1 mg/lto10 mg/l
Biochemical OxygenDemand
lS 3025 (Part 44): 1993(RA 2014)
3 mg/l to 1000 mg/l
Oil & Grease lS 3025 (Part 39): 2003 0.4 ms/lto 100 mq/lTotal Suspended Solid lS 3025 (Part 17):2006 2.0 msll to 300 mo/lCalcium lS 3025 (Part 40): 2003 1 ms/lto 1000 ms/lNitrite Nitrogen(NO,-N)
lS 3025 (Part 34): 2009 0.01 mg/lto 200 mg/l
Ammonia (as TotalAmmonia-N)
lS 3025 (Part 34): 2009 0.2 mgil to100 mg/l
Silica lS 3025 (Part 35): 2003 0.01 mg/lto '100 mg/lBoron !9 QQ?9 (Pert 57): 2005 0.02 mg/lto10 mg/lPhenolic Compounds lS 3025 (Part 43): 2003 0.1 mg/lto 50 mg/lHexavalent Chromium !S QQls (Part 52): 2003 0.01 mg/lto 25 mg/lMercury lS 3025 (Part 4B): 2003 0.001 mq/lto 20 mo/llron lS 3025 (Part 53) 0.01 mq/lto 50 mq/l
ir. Product / Materialof Test
ANNEXURE I : MoEF ACCREDITATION CERTIFICATE OF LAB