andrew hbx6516dsvtm

2
HBX-6516DS-VTM DualPol® Teletilt® Antenna, 1710–2170 MHz, 65° horizontal beamwidth, RET compatible l Superior azimuth tracking and pattern symmetry to minimize any sector overlap l Field adjustable electrical tilt l Rugged, reliable design with excellent passive intermodulation suppression l Fully compatible with Andrew Teletilt® remote control system Electrical Specifications Frequency Band, MHz 1710–1880 1850–1990 1920–2170 Gain, dBi 17.7 18.0 18.0 Beamwidth, Horizontal, degrees 65 65 65 Beamwidth, Vertical, degrees 7.5 7.0 6.5 Beam Tilt, degrees 0–10 0–10 0–10 USLS, typical, dB 18 18 18 FronttoBack Ratio at 180°, dB 30 30 30 Isolation, dB 30 30 30 VSWR | Return Loss, dB 1.4:1 | 15.6 1.4:1 | 15.6 1.4:1 | 15.6 PIM, 3rd Order, 2 x 20 W, dBc 153 153 153 Input Power per Port, maximum, watts 350 350 350 Polarization ±45° ±45° ±45° Impedance 50 ohm 50 ohm 50 ohm Lightning Protection dc Ground dc Ground dc Ground Mechanical Specifications Color | Radome Material Light gray | PVC, UV resistant Connector Interface | Location | Quantity 716 DIN Female | Bottom | 2 Wind Loading, maximum 256.8 N @ 150 km/h 57.7 lbf @ 150 km/h Wind Speed, maximum 241.0 km/h | 149.8 mph Dimensions Depth 83.0 mm | 3.3 in Length 1306.00 mm | 51.42 in Width 166.00 mm | 6.54 in Net Weight 4.70 kg | 10.36 lb Remote Electrical Tilt (RET) Information Model with Factory Installed AISG 1.1 Actuator HBX6516DSR2M Model with Factory Installed AISG 2.0 Actuator HBX6516DSA1M Regulatory Compliance/Certifications Agency Classification RoHS 2002/95/EC Compliant by Exemption China RoHS SJ/T 113642006 Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system Product Specifications ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012 page 1 of 2 April 27, 2012

Upload: ridwan-crra

Post on 08-Nov-2014

55 views

Category:

Documents


5 download

TRANSCRIPT

Page 1: Andrew Hbx6516dsvtm

 

HBX-6516DS-VTM DualPol® Teletilt® Antenna, 1710–2170 MHz, 65° horizontal beamwidth, RET compatible  

l Superior azimuth tracking and pattern symmetry to minimize any sector overlap 

l Field adjustable electrical tilt 

l Rugged, reliable design with excellent passive intermodulation suppression 

l Fully compatible with Andrew Teletilt® remote control system 

Electrical SpecificationsFrequency Band, MHz 1710–1880 1850–1990 1920–2170Gain, dBi 17.7 18.0 18.0Beamwidth, Horizontal, degrees 65 65 65Beamwidth, Vertical, degrees 7.5 7.0 6.5Beam Tilt, degrees 0–10 0–10 0–10USLS, typical, dB 18 18 18Front­to­Back Ratio at 180°, dB 30 30 30Isolation, dB 30 30 30VSWR | Return Loss, dB 1.4:1 | 15.6 1.4:1 | 15.6 1.4:1 | 15.6PIM, 3rd Order, 2 x 20 W, dBc ­153 ­153 ­153Input Power per Port, maximum, watts 350 350 350Polarization   ±45° ±45° ±45°Impedance   50 ohm 50 ohm 50 ohmLightning Protection   dc Ground dc Ground dc Ground

Mechanical Specif ications Color | Radome Material  Light gray | PVC, UV resistant 

Connector Interface | Location | Quantity  7­16 DIN Female | Bottom | 2 

Wind Loading, maximum  256.8 N @ 150 km/h57.7 lbf @ 150 km/h 

Wind Speed, maximum  241.0 km/h   |   149.8 mph 

  

Dimens ions Depth  83.0 mm   |   3.3 in 

Length  1306.00 mm   |   51.42 in 

Width  166.00 mm   |   6.54 in 

Net Weight  4.70 kg   |   10.36 lb 

  

Remote E lec t r ical T i l t (RET) In format ion Model with Factory Installed AISG 1.1 Actuator HBX­6516DS­R2M 

Model with Factory Installed AISG 2.0 Actuator HBX­6516DS­A1M 

Regulatory Compliance/Cert i f icat ionsAgency ClassificationRoHS 2002/95/EC Compliant by ExemptionChina RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV)ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system

Product Specifications

©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

page 1 of 2April 27, 2012

Page 2: Andrew Hbx6516dsvtm

   

Inc luded Produc ts

602030A — Downtilt Mounting Kit for 2.4 ­ 4.5 in (60 ­ 114 mm) OD round members 

Product SpecificationsHBX-6516DS-VTM

©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012

page 2 of 2April 27, 2012