and its brandartemis-ioe.eu/events/presentations/nesem_2012...bodywork: external/internal panels,...
TRANSCRIPT
October 6, 2012 By PLC 1
…… and its Brand
StyleYacht DesignCity Cars Power Trains
the products
…. means
The new Electrical City Car
The new City Car has been presented on december 2010 At Ara Pacis Museum
Dany project Started in the 2008 as for the intention of S. Maccagnani to develop mple and at the same time prestigious city car, capable to reach easily all the point city, including limited traffic areas.
ally the Dany project was developed with the support of Picchio, experienced pany on definition of car structure and dynamics.
the Design and esthetical matters was involved in the project the “Italia Design” by erano.
e 2011 the project has been collected to Belumbury in all its parts. Mechanical, etical and Electrical subject are now fully own by Belumbury, managed together in technical solution.
e 2011 a collaboration with the Bologna University has been established for the ization of the Power Train system. The project is now successfully completed and y for production.
• DANY is a four wheel motorcycle• Homologated as L7E category • Electrical or Thermal propulsion
• The electrical version offers:
– 180Km of autonomy in standard urban drive mode– About 2.8€ for one Battery Charge 180Km– 90km/h max Speed– 10Kwatt asynchronous engine– Full HVAC system (Heating, Ventilation and Air Conditioning)– 8 or 4 hour charging Battery time
Electrical traction group: AC asynchronous three-phase, high efficiencyPosition : Rear, ahead of rear axleContinuous power (at rev/min): 10 kW (at max. 7800 min-1)Maximum torque (at start): 130 N/mEngine controller: Inverter type (field-oriented), with three modes: ECO – RACE –HILL HOLDERTransmission: Single ratio reduction (10:1) and homokinetic axle shafts , on rearwheels
Batteries group: Li-ion, with iron phosphate (Li-FePO4)Capacity: Nr. 32 cells, 160Ah eachTotal nominal voltage: 107 VTotal Energy: 16.3 kWhCharge/discharge cycles: 2000Mass /volume: 179 kgManagement system: BMS with charge-discharge parameters control and integralbatteries protectionPlug-in battery charger: Integrated into BMS max. 2,4 kW (standard domestic energy supply 220 V, 3 KW); Complete charge time: 8 hoursmaxOptional battery charger : integrated to the BMS, max 4,8 KW
Maximum slop: More than 30%, including Hill-Holder functionalities.
Vehicle body: Structure: Space frame with metal tubes, three modulesMaterial: High tensile steelSafety structure: Frontal crash-box
Bodywork: External/internal panels, plastics madeMaterial: ABS-PMMA thermoformed, various composite materialsNumber of doors /seats: 3 / 4
Dimensions and weight: Length 3185 mm, Width 1613 mm, Heigth 1484 mmPitch/track: 2270 mm / 1370 mmWeight in running configuration: 750 kg (with batteries, without driver)Max weigth:1200 kg
Performances: Max speed: 92 km/hAutonomy: Up to 190 km (at urban speed), over 140 km (on highway, ECO mode)Cost per kilometer: 0,015 €/km (urban) approx 2.8€ for 180Km.
Road homologation: Quadricycle (category L7e transport of persons and goods)
Inter long shaft spaceto improve confort
sive crash boxcrease safety
High streaching volumein the rear side to increase
boomp protectionh
Four seat withinlittle more then 3
metres
With, in mind
Safety first
er Train System specification:
nal Current: In=130 [ARMS]oad Current x2.5 Iovl=330[ARMS], nal Torque: Tn=34 [Nm]oad Torque x2.5: Tovl=115 [Nm], pari a 3.38xTnnal Speed: nn=2650 [rpm]Speed: nMAX=7200 [rpm]Power at max speed: PnMAX=10300 [W]netizing Current: Id=76 [ARMS]nal Battery Voltage: VDCR=104 [V]ry Reference Voltage at 10kW VDC_10kW=99 [V]
er Train Control efficiency diagram
Power dissipation comparison between
an standard asynchronous motor and the Dany one
Efficency Comparision
he next short FutureM1 Model – samples should be ready at the end of OctoberIntegration and optimization of the PWT finalized to other applications like motocycle, multimotor cars, etc…Electric Break system to include ABS and ESP improving autonomy – (multi motors PWT)Solar cell to increase autonomy.Multi‐Function Unit (MFU) to control and better govern the entire car systemStandard production site definition for easily replication close the market local scenarios.
se refer to the Belumbury site for any more details, including order applications.
www.belumbury.it