an industrial visit to parsoli motor works pvt. ltd....
TRANSCRIPT
An Industrial visit to Parsoli Motor Works Pvt. Ltd. BMW
7th August, 2015 Ahmedabad
An industrial visit to Parsoli Motor Works Pvt. Ltd. BMW was organized by the students’
club SAE LDCE of L. D. College of Engineering, Ahmedabad. In which 17 students from the
institute and 9 core team members were present at the workshop along with three faculty
advisors, Prof M.A. Shaikh, Prof. D.J.Parmar and Prof. V.R.Patel from the institute. The visit
was coordinated by the core team member Saurabh Trivedi. Mr. Akshat Shukla, General
Manager Sales, Parsoli Motors and Mr. Mrudul Kothari, Workshop Manager, BMW
workshop helped the students to make this visit possible.
All the students and the faculties gathered at the workshop at 11 a.m. They were warmly
welcomed by the BMW representatives. Firstly a brief introduction about BMW group and the
workshop was given by Mr. Akshat Shukla and Mr. Mrudul Kothari. From that the students and
the faculties came to know what BMW group is. Safety is the main consideration of the BMW
products. After that there was a Question Answer session in which the students as well as the
Faculties asked different questions they had regarding the workshop and the products of BMW.
After that the students and the respected Faculties were taken inside the workshop guided
by the representatives accompanied by the workshop team. The workshop was neat, well
managed and disciplined. Different tasks were allotted to different members. There were separate
areas allocated for specific tasks like wheel alignment, brake test, paint job, engine testing etc.
All the tasks were done in very systematic way. The staff was very humble and helpful. When a
car comes for anything, the general inspection is done and after that it is sent to the specific area
where it is checked and serviced very nicely. After all the testing and checking the car is sent
back to the customers. Safety is very important in any big workshop like this. All the people out
there worked with all the safety equipments. The students were advised not to take picture inside
the workshop. The students were taken to each and every section of the workshop and were
shown and given brief information about every job done there.
Then the Students and the faculties were welcomed to the Showroom of BMW at
Sanand- Gandhinagar Highway. The showroom was very elegant and very impressive. As
BMW is one of the most loved brands all over the world, everyone eagerly waited to see the cars
out there. The main attraction of the Showroom was the most loved car the “BMW i8”. The
students as well as the faculties took photos there and it was a very happy moment for all of the
people present there.
After that a small Memento-frame was given to Mr. Akshat Shukla, General Manager Sales,
Parsoli Motors by SAE LDCE for making the visit possible and to create a better relation in
future.
And the visit ended with the group photo session of the students and the respected faculty
advisors present at the Parsoli Motor Works Pvt. Ltd. BMW. All the students and the faculties
were thankful to BMW to provide their valuable time to arrange the visit.
LEARNING BY DOING
Visitor List
Sr No. Name Contact No. Email_id
First Year 2019 Batch
1 Sandip Chotaliya 8866696777 [email protected]
2 Patel Vikas 9427279945 [email protected]
3 Patel Dhruv 9408013920 [email protected]
4 Patel Saumil 9737821252 [email protected]
5 Padiya Mayand 7572913101 [email protected]
6 Mulchandani Harsh 7801967773 [email protected]
7 Khandivar Chirag 8141025725 [email protected]
8 Akshay Rana 9574367167 [email protected]
9 Jay Talreja 8469914449 [email protected]
10 Shani Prajapati 8758178757 [email protected]
11 Agam Shah 8511795370 [email protected]
12 Anshul Khandelwal 8460448367 [email protected]
13 Puthawala Aftab 8460104220 [email protected]
14 Jaydip Bhesaniya 7359430418 [email protected]
15 Mohit Jogi 7359468136 [email protected]
16 Patel Jitendra 7359385829 [email protected]
17 Darpan Topiya ~ ~
SAE LDCE Core Team
18 kishan thakkar 9724087799 [email protected]
19 saurabh jariwala 9737925697 [email protected]
20 kaushal parmar 8238263719 [email protected]
21 rihen shah 8866100921 [email protected]
22 ankit prajapati 9586010879 [email protected]
23 saurabh trivedi 7359933049 [email protected]
24 devak bhradwaj 9428113959 [email protected]
25 unmit parmar 9601764727 [email protected]
26 Riddhi Patel 8866281823 [email protected]
Faculties
27 M A Shaikh 9904518032 [email protected]
28 D J Parmar ~ [email protected]
29 V R Patel ~ [email protected]
Report Prepared By: Unmit Parmar, SAE LDCE Student Vice President.
MECHANICAL AND AUTOMOBILE ENGINEERING DEPARTMENT L.D.COLLEGE OF ENGINEERING-AHMEDABAD-15
Report on Seminar on Robotics & Intelligent Systems
By
Edubotix Innovations Ahmedabad
At LD College Of Engineering, Ahmedabad
Edubotix Innovations conducted a successful seminar on
Robotics & Intelligent Systems on 10th September
2015.Duration for the seminar was 2 Hours.
Total 100 students from Automobile and Mechanical branch
actively participated and shown enthusiasm.
Edubotix Innovations Team conducted the seminar and Ms.
Shivani Tak gave insight about latest trends in Robotics Industry
and how it is changing the conventional method of doing a task.
Importance, applications and scope of Artificial Intelligence and
Machine Vision were discussed during the session. Some
important and successful case studies were discussed with
students and how robotics has come up with solutions to
industries such as Thermal plants and space were
discussed.Future possibilities for building career in the field of
robotics and automation were discussed.
Shivani Tak and her team thanked the Head of Automobile and
Mechanical Department, LD College of Engineering for giving
them opportunity to interact with wonderful students and
making seminar successful.
MECHANICAL AND AUTOMOBILE ENGINEERING DEPARTMENT L.D.COLLEGE OF ENGINEERING-AHMEDABAD-15
Report on Seminar on Solidworks
By
Solidworks Authorized Training Center,
Edubotix Innovations, Ahmedabad
At LD College Of Engineering, Ahmedabad
Solidworks Authorized Training Center in association with Edubotix
Innovations and Engineering Technique conducted a successful
seminar on SOLIDWORKS & ITS SCOPE on 9th September
2015.Duration for the seminar was 2 Hours.
Total 120 students from Automobile and Mechanical branch actively
participated and shown enthusiasm.
Solidworks-ATC (Edubotix Innovations) Team conducted the seminar
and Mr. Swapnil Jhadav and Mr. Rudresh Vyas gave Solidworks world
insight to students and its importance and scope were discussed with
students along with demonstration of software.
Objective of the seminar was to spread awareness about the latest
technology and designing trends in market and how solidworks is
used in different industries and because of its unique features how it
is the most user friendly software.
Digital Manufacturing technology and its use in market was
discussed. Brief discussion was done about how Computer aided
designing, machining and 3D printing is taking over the conventional
method of manufacturing; thus increasing the production like never
before.
Shivani Tak and her team thanked the Head Of Automobile and
Mechanical Department, LD College of Engineering for giving them
the opportunity to interact with wonderful students and making the
seminar successful.
SAE LDCE ORIENTATION 14th August, 2015 AHMEDABAD SAE LDCE ORIENTATION programme, which is organized by club members
every year for fresher students to get familiar with the club and its activities. This year also
orientation programme was organized on 14th august in room no. 605, mechanical
department.
On the day
of orientation, Students
from 1st year of automobile
and mechanical department
came at 1 pm. After they all
got their sits, Unmit Parmar,
vice president congratulated
and welcomed them by
short speech. Afterwards he
described club in brief and
all about activities and goal
and he invited Rihen Shah,
President of club, to join the
stage. He described them
about organization, club
history and told them about past activities and achievements.
Chintan Agrawal, student from 2nd year and membership chairperson of club, he described
about membership process and also included
last year competition Elite GO-Karting, in
which team asphalt aces had took part. He
told the whole journey from team registration
to the final race day. He told them about how
they struggled in last day of competition
because of lake of time.
After this short presentation Ketan Bhavsar,
student from 2nd year automobile, came and
told students about other activities and competitions of club. He included EGVC-Eco Green
Vehicle Challenge, which was organized by collegiate club itself. In which students from
undergraduate engineering course supposed to make team and make over hybrid vehicle
with human power. Afterwards he described about BAJA STUDENT INDIA and SAE BAJA,
event organized by SAE INDIA. The whole history and process was described by Ankit
Prajapati. Ketan told them about SAE SUPRA, FORMULA DESIGN CHALANGE, SAE ECCO
KART, SAE AERO DESIGN and other visits, internships organized by club.
And then turned for Kishan Thakkar, team
member of GT Motorsports, A university
team presented about his team and event.
He was told them about his journey from
GO-Kart team to the university team and
described about whole process of making
student level formula car to the students.
There was again one
presentation by Rihen Shah, and topic was
process team formation, designing of
vehicle as per requirement, department
allocation, virtual preparation and
presentation, manufacturing process and about different events on the site like technical
inspection, break test, acceleration and final endurance.
At the last Ankit Prajapati, Team captain of LDCE Motorsports, team of SAE
BAJA and BAJA STUDENT INDIA 2016 came to stage and told about what is Baja?, What they
do?, How Baja vehicle is different than other? Etc. He also told about some basic process of
event and its importance etc.
At the end of the programme Pro. M A Shaikh, Senior faculty of SAE CLUB LDCE
came to the stage and congratulated students and appreciate them to join the club and
continue the legacy. The programme was completed by thanking ceremony given by Prof.
D.U.Panchal.
LEARNING BY DOING
Present Students List Sr No Name Semester Branch
1 Jaydip Bhesaniya 1 auto 2 Raval Bhavin 1 auto
3 Patel Kishan 1 auto
4 Chudasama Viral 1 auto
5 Vaghela Piyush 1 auto
6 Patani Manoj 1 auto
7 Amin Digan 1 auto
8 Panchal Prakash 1 auto
9 Padia Mayand 1 auto
10 Aagan Shah 1 auto
11 Mohit Jogi 1 auto
12 Aftab Puthawala 1 auto
13 Jethva Siddharth 1 auto
14 Bhogayata Hriday 1 auto
15 Sagar Varvariya 1 auto
16 Alvi Sajid 1 auto
17 Jay Talreja 1 auto
18 Yash Daruwala 1 auto
19 Keval Ghoghari 1 auto 20 Keval Rathod 1 auto
21 Prajapati Dinesh 1 auto
22 Solanki Jignesh 1 auto
23 Noeal Patel 1 auto
24 Khandival Chirag 1 auto
25 Hadiya Jaydeep 1 auto
26 Rathva Hitesh 1 auto
27 Vanand Jaydeep 1 auto
28 Sharma Jayesh 1 auto
29 Desai Divyadatt 1 auto
30 Patel Het 1 auto
31 Hardik Tejani 3 auto
32 Chandrakant Shunga 3 auto
33 Patel Vikalp 3 auto
34 Parmar Karan 3 auto
35 Patel Chintan 3 auto
36 Bhavsar Devang 3 auto
37 Jaydeep Rana 3 auto
38 Lakum Rakshit 3 auto 39 Dhyavarkonda Manoj 3 auto
40 Virgamia Vishnu 3 auto
41 Kalashva Dashrath 3 auto
42 Vijay Sondagar 3 auto
43 Bamaniya Sanjay 3 auto
44 Chavda Ronak 3 auto
45 Vaidhya Ronak 3 auto
46 Shivam Gupta 3 auto
47 Jaydeep Vanol 3 auto
48 Chaudhary Vinay 3 auto
49 Vaghela Pradipsinh 3 auto
50 Nirav Mulani 5 auto
51 Piyush Sen 7 auto
52 Tank Milan 1 mech
53 Prajapati Kush 1 mech
54 Tarun Prajapati 1 mech
55 Patel Divyesh 1 mech
56 Jaydeep Sarvarkar 1 mech
57 Dhakre Urjeet 1 mech
58 Patel Meet 1 mech
59 Dodiya Vinit 1 mech
60 Parmar Ronak 1 mech
61 Nisarg Ranpura 1 mech
62 Nakum Haresh 1 mech
63 Sankliya Jagat 1 mech
64 Jaiswal Jay 1 mech
65 Rushit Makwana 1 mech
66 Chaudhary Chirag 1 mech
67 Dodiya Yuvraj 1 mech
68 Prajapti Sarjak 1 mech
69 Parmar Yash 1 mech
70 Vaishnav Keval 1 mech
71 Dave Ujaval 1 mech
72 Parmar Parimal 1 mech
73 Patel Ujjaval 1 mech
74 Mistry Dharmik 1 mech
75 Chavda Praksh 1 mech
76 Makwana Akshay 1 mech
77 Balgamiya Vikash 1 mech
78 Shah Dip 1 mech
79 Modi Harshil 1 mech
80 Mayur Suthar 1 mech
81 Jani Ronit 1 mech
82 Vasava Erick 1 mech
83 Patel Krunal 1 mech
84 Aanand Panchal 1 mech
85 Manik Koul 1 mech
86 Karova Prathmesh 1 mech
87 Bamaniya Chirag 1 mech
88 Kher Mayur 1 mech
89 Solanki Divya 1 mech
90 Gohel Umesh 1 mech
91 Raval Dharmesh 1 mech
92 Asari Rohit 1 mech
93 Aditya Yadav 1 mech
94 Katariya Sanjay 1 mech
95 Baldania Aakash 3 mech
96 Nave Shashish 3 mech
97 Parmar Deepak 3 mech
98 Nilkanth Panchal 3 mech
99 Gadhavi Krunal 3 mech
100 Prajapti Hardik 3 mech
101 Upadhyay Utkarsh 3 mech
102 Patel Rishabh 3 mech
103 Gamit Imonvel 3 mech
104 Bhavatra Ashok 3 mech
105 Makwana Rutvij 3 mech
106 Engineer Mahek 3 mech
107 Jigar Chauhan 3 mech
108 Smit Chauhan 3 mech
109 Patel Meet 3 mech
110 Prajapati Mahesh 3 mech
111 Prajapati Vikash 3 mech
112 Rana Rupesh 3 mech
113 Talaviya Pragnesh 3 mech
114 Sheth Viren 3 mech
115 Rohit Chirag 3 mech
116 Nainuji Dhaval 3 mech
117 Gusai Dhavl 5 mech
118 Kevadiya Urvish 1 text
119 Gujarati Vivek 1 text
120 Golakia Archit 1 text
121 Pancholi Abhilash 1 environment
122 Prajapati Pritesh 1 ec
123 Asodiya Ronak 1 ec
124 Gamit Divyesh 1 ec
125 Pachasara Dipesh 1 ec
126 Rana Parth 1 ec
127 Dhaval Parmar 3 ic
128 Ahir Nishant 3 ic
Sae Ldce Volunteers
129 Kishan Thakkar 3 auto
130 Parth Panchal 3 auto
131 Chintan Agrawal 3 auto
132 Ketan Bhavsar 3 auto
133 Makvana Rushi 3 auto
134 Panchal Khusal 3 auto
135 Saurabh Jariwala 3 auto
136 Darshan Chavda 5 auto
137 Pratik Valani 5 auto
138 Jigar Rakholiya 5 auto
139 Gohil Aakash 5 auto
140 Hardik Thummer 5 auto
141 Satish Hapani 5 auto
142 Patel Piyush 5 auto
143 Trivedi Saurabh 5 auto
144 Unmit Parmar 5 auto
145 Hardik Gevariya 5 auto
146 Bhuva Jaydeep 5 auto
147 Ankit Prajapati 7 auto
148 Kaushal Parmar 7 auto
149 Bhavesh Sitlani 7 auto
150 Rihen Shah 7 auto
151 Mevada Jaimin 7 auto
152 Otiya Parth 7 auto
Report Prepared By: Saurabh Jariwala, SAE LDCE Membership Committee Member
S.T. WORKSHOP VISIT 10th AUGUST,2015 AHMEDABAD.
SAE LDCE organises different educational visits to different automotive organizations like ARAI,
BMW workshop visit, S.T. Workshop visit etc. This month we organized one day visit to GSRTC
Workshop, Naroda for 1st and 2nd year students under consideration club core members Kishan
Thakkar, Saurabh Jariwala, Ankit Prajapati and Chintan Agrawal.
On 10th August, Monday SAE CLUB LDCE had organized a visit to GSRTC workshop, which is situated
at Naroda. Students from 1st and 2nd year automobile and mechanical engineering department were
gathered at 10:30am. First they visited Engine shop, in which they learned about boring of cylinder,
some machining processes, engine general services, valve mechanism and timings, assembly of
different part etc. 1st year students, who were new in this field, they learned about basic engine
components and their working.
After learning about engine, they moved to Diesel injecting machine. One worker was
operating that machine who described the whole process. They learned about different type of
pumping system like centrifugal and reciprocating pumping system too.
Then students went to fabrication
shop. There were many bus roll cages which
were not in use then. On that they learned
about different part of bus chassis and
mounting of different components. At the
same place students learned about box type
steering system.
At the end of the visit, all the
students and core member SAE LDCE were
visited the Paint shop. There were bodies
ready to go to the assembly shop and many
of remaining were in the way of painting. In last they took a selfie in bus as a memorable moments.
At the end students thanked to the workshop authorities and workers for giving them
permission to visit and to help them to learning new things about present systems in automobile
world.
LEARNING BY DOING
Present Students List
Sr. No. NAME Roll No. CONTACT NO. SEMESTER
1 Mangukiya Yash Pravinbhai 102028 8905719259 SEM 1
2 Baranda Chirag 102055 9601454482 SEM 1
3 Darpan Topiya 102011 8000931508 SEM 1
4 Aagam Shah 102014 8511795370 SEM 1
5 Chotaliya Sandip R. 102036 8866696777 SEM 1
6 Jaydip Bhesaniya 102013 7359430418 SEM 1
7 Mohit Jogi 102043 7359468136 SEM 1
8 Makwana Rushi Bharatkumar 302031 9687906006 SEM 3
9 Parth Panchal 302037 9904847248 SEM 3
10 Hardik Tejani 303001 9016151700 SEM 3
11 Panchal Kushal J 302036 9099046996 SEM 3
12 Darpan Topiya 102011 8000931508 SEM 1
13 Jaydeep Vanol 302025 7359302979 SEM 3
14 Vadgama Keval Vinodbhai 302054 9725648903 SEM 3
15 Khuman Shaishav Mavjibhai 302028 8460680961 SEM 3
16 Chavda Parth Ashawinbhai 302039 8460111034 SEM 3
17 Bhavsar Nishitkumar Shivabhai 302010 9662991268 SEM 3
18 Agotariya Dinakarkumar J 302001 9426641757 SEM 3
19 Bhagirathkumar Mandani 302032 9978808765 SEM 3
20 Gamit Alpesh 302018 9979524363 SEM 3
21 Sanjay Bamaniya 302006 9662274298 SEM 3
22 Valand Jaydeep Natavarlal 302056 8690464081 SEM 3
23 Rathod Pareshkumar Vinubhai 302050 8487926300 SEM 3
24 Talreja Jay 102001 8469914449 SEM 1
25 Chudasama Viral 102044 9429977610 SEM 1
26 Shani Prajapati 102014 8511795370 SEM 1
27 Anshul Khandelwal 102015 8460448367 SEM 1
28 Shani Prajapati 102039 8758178757 SEM 1
29 Alvi Sajid Anwarbhai 102006 8128261189 SEM 1
30 Prajapati Shani Vinayakbhai 102039 8758178757 SEM 1
31 Jayvallabh Gorasiya 102024 9825185904 SEM 1
32 Padia Mayand Janakkumar 102061 7572913101 SEM 1
33 Shivam Gupta 302021 7046768026 SEM 3
34 Ankit Vora 302057 9033601808 SEM 3
35 Parth Bhalala 302108 8140053077 SEM 3
36 Ankit Vora 302157 9033601808 SEM 3
37 Vicky Vora 302058 +91 74 05 060508 SEM 3
38 Ketan Bhavsar 302009 9714779901 SEM 3
39 Chirag Khandivar 102003 8141025725 SEM 1
40 Kishan Thakkar 302029 9724087799 SEM 3
41 Shivam Gupta 302021 7046768026 SEM 3
42 Vaidya Ronak Rajeahbhai 302055 8460145025 SEM 3
43 Chavda Bhavinkumar Bhimabhai 302013 8140403281 SEM 3
44 Chintan Agrawal ~ 9714562679 SEM 3
45 Saurabh Jariwala ~ 9737925697 SEM 3
46 Ankit Prajapati 702140 9586010879 SEM 7
47 Rihen Shah 702133 8866100921 SEM 7
Report prepared by : Saurabh Jariwala, SAE LDCE Membership Committee Member
Workshop Preparation
20th August ,2015 Ahmedabad.
Every year students from LD College of Engineering participates in different events. This year
team of 25 students from Automobile department is participating SAE BAJA 2016 and Baja
Student India 2016. In which team have design, analysis and fabricate their off road vehicle.
For which they required a workshop and nowadays college workshop is in development
state. So students have to arrange as per their own requirement. For which college is
supporting them on every stage.
For development of their workshop students has done all the thing from
paper work to market and hard work. They took permissions from college faculties to use
college properties . College had granted permission for using Smithy Lab as workshop.
College also supported for flooring facilities in lab. Students also arranged for electrician for
workshop facilities like welding, cutting, lighting facilities and etc. College supported them
for tools and other peripherals like fans, tube lights, three phase wires etc from electric
store of college. Pro. B C Khatri Sir supported them for most of the things. After that all
students managed to clean the workshop and made it as per their requirement. It took half
month for being ready for work.
On 19th August Monday, there was opening ceremony for BAJA Student’s new
workshop. At that day Head of Mechanical department Dr. G H Uppadhyay, Head of
Automobile department Dr. R J Jani , Pro. B C Khatri and Pro. M A Sheikh was present on the
site. Uppadhyay Sir and Jani sir cut the reborn and enlighten a candle in the corner of
workshop and made the workshop open for work for students. At the end of the ceremony
Students celebrated their work by sweets.
LEARNING BY DOING
Report Prepared by : Saurabh Jariwala, SAE LDCE Membership Committee Member