xp-8 rti advanced system control processor
Post on 15-Jan-2016
30 Views
Preview:
DESCRIPTION
TRANSCRIPT
XP-8
RTI Advanced System ControlProcessor
Key Features:
-(8) MPIO (Multi-purpose Input Output) ports
-(8) Bi-directional RS-232 ports
-(8) Sense inputs
-(8) Programmable relay/voltage trigger outputs
-Real time astronomical clock for time, day of week, and interval based functions
-Rack mountable
-Non volatile Flash memory
SD/MM Memory Card Slot
Reset Button Menu Button
Cursor Control Buttons
IR Output Adjustment Controls Display Backlight Button
USB Programming Port
Bi-directional RS-232 Ports Sense Inputs
Relay/Trigger Outputs USB RTI COM Port
MPIO Ports (IR out, RS-232, Sync in) IR Connections
Ethernet Expansion Port
MPIO’s (Multi Purpose Input/Output ports)
-Each MPIO can directly drive up to 4 IR Emitters-Direct injection of IR to rear panel of devices-Use with Video Sync or Voltage Sense modules-Use for RS-232 communication with CM-232 module
RS-232 Ports
-Category 5 with RJ-45 termination (568b)-(8) RJ-45 to DB-9 adapters included-Bi-directional RS-232 capable
Sense Inputs
-Sense contact closure-Sense voltage trigger-Upon sensing, events can be automatically triggered from the XP-8
Relay/Trigger Outputs
-Configure as contact closure or voltage trigger-5 or 12 +VDC, 100mA current capability-Normally open or normally closed-When configured as a trigger, A= +VDC, B= GROUND
Infrared Terminals
-Terminal: +12VDCUsed to power external IR or RF receivers
-Terminal: GNDGround reference for any device connected to any terminal (SIGNAL IN, +12VDC, HIGH OUT)
-Terminal: SIGNAL INIR or RF system trigger code input
-Terminal: HIGH OUT200mA IR output to power an external connecting block or IR blaster
Ethernet Port
RJ-45 port allows connection to LAN to download systemfiles to the XP-8
USB Ports (rear)
Host ports for external devices (future use)
RTI COM Port
RJ-45 port allows connection to a Zigbee transceiver (ZM-24) module, supporting full two-way communicationwith compatible RTI handheld controllers
Expansion Port
RJ-45 port provides a connection for IR signals for a CB-4connecting block, or RS-485 serial communication within-wall controllers, or expansion devices like the RCM-12
MENU -Delivers the main menu if unlocked, the unlock screen if XP-8 is locked
SEL -Selects menu/function
EXIT -Navigate back 1 level (function to menu, or menu to previous menu)
CURSOR Keys -Navigate the selected menu options
Display
- Sensing status of VPS-1/SPS-1 power sync modules- Status of each “Sense” input- Current state (open, closed) of each relay- Current firmware date/version- Time/date- On-screen diagnostics
XP-8 Processing Rules
-XP-8 will send standalone IR codes in the order they are received from the controllers
-6 macro engines allow for the execution of up to six macros simultaneously
-Once an IR command begins, it runs to completion
-If a macro sends an IR code, it will wait at that step until the IR generator is free
-Once a macro begins to transmit IR codes, that macro engine has exclusive use of the IR generator until it sends an instruction OTHER than IR (flag test, relay, delaying, etc.)
top related