xp-8 rti advanced system control processor
DESCRIPTION
XP-8 RTI Advanced System Control Processor. Key Features: -(8) MPIO (Multi-purpose Input Output) ports -(8) Bi-directional RS-232 ports -(8) Sense inputs -(8) Programmable relay/voltage trigger outputs -Real time astronomical clock for time, day of week, - PowerPoint PPT PresentationTRANSCRIPT
XP-8
RTI Advanced System ControlProcessor
Key Features:
-(8) MPIO (Multi-purpose Input Output) ports
-(8) Bi-directional RS-232 ports
-(8) Sense inputs
-(8) Programmable relay/voltage trigger outputs
-Real time astronomical clock for time, day of week, and interval based functions
-Rack mountable
-Non volatile Flash memory
SD/MM Memory Card Slot
Reset Button Menu Button
Cursor Control Buttons
IR Output Adjustment Controls Display Backlight Button
USB Programming Port
Bi-directional RS-232 Ports Sense Inputs
Relay/Trigger Outputs USB RTI COM Port
MPIO Ports (IR out, RS-232, Sync in) IR Connections
Ethernet Expansion Port
MPIO’s (Multi Purpose Input/Output ports)
-Each MPIO can directly drive up to 4 IR Emitters-Direct injection of IR to rear panel of devices-Use with Video Sync or Voltage Sense modules-Use for RS-232 communication with CM-232 module
RS-232 Ports
-Category 5 with RJ-45 termination (568b)-(8) RJ-45 to DB-9 adapters included-Bi-directional RS-232 capable
Sense Inputs
-Sense contact closure-Sense voltage trigger-Upon sensing, events can be automatically triggered from the XP-8
Relay/Trigger Outputs
-Configure as contact closure or voltage trigger-5 or 12 +VDC, 100mA current capability-Normally open or normally closed-When configured as a trigger, A= +VDC, B= GROUND
Infrared Terminals
-Terminal: +12VDCUsed to power external IR or RF receivers
-Terminal: GNDGround reference for any device connected to any terminal (SIGNAL IN, +12VDC, HIGH OUT)
-Terminal: SIGNAL INIR or RF system trigger code input
-Terminal: HIGH OUT200mA IR output to power an external connecting block or IR blaster
Ethernet Port
RJ-45 port allows connection to LAN to download systemfiles to the XP-8
USB Ports (rear)
Host ports for external devices (future use)
RTI COM Port
RJ-45 port allows connection to a Zigbee transceiver (ZM-24) module, supporting full two-way communicationwith compatible RTI handheld controllers
Expansion Port
RJ-45 port provides a connection for IR signals for a CB-4connecting block, or RS-485 serial communication within-wall controllers, or expansion devices like the RCM-12
MENU -Delivers the main menu if unlocked, the unlock screen if XP-8 is locked
SEL -Selects menu/function
EXIT -Navigate back 1 level (function to menu, or menu to previous menu)
CURSOR Keys -Navigate the selected menu options
Display
- Sensing status of VPS-1/SPS-1 power sync modules- Status of each “Sense” input- Current state (open, closed) of each relay- Current firmware date/version- Time/date- On-screen diagnostics
XP-8 Processing Rules
-XP-8 will send standalone IR codes in the order they are received from the controllers
-6 macro engines allow for the execution of up to six macros simultaneously
-Once an IR command begins, it runs to completion
-If a macro sends an IR code, it will wait at that step until the IR generator is free
-Once a macro begins to transmit IR codes, that macro engine has exclusive use of the IR generator until it sends an instruction OTHER than IR (flag test, relay, delaying, etc.)