wiswis m. mehdi ouaret président de l’association +33(0)605759512 contact@wis-france.fr

WISM. Mehdi Ouaret

Président de l’association+33(0)605759512www.wis-france.fr

contact@wis-france.fr

ShopMill with DMG MORI SEIKI Machines

Example 1: Longitudinal guide

Learning objectivesThis section will explain the first steps to create a workpiece in detail. You will learn how to...● create and manage programs;● call tools and perform a cutter radius compensation;● enter traversing paths;● create drill holes and handle position repetitions.

Example 2: Injection mold

Learning objectivesIn this section you will learn the following new functions. You will learn how to...● specify straight lines and circular paths using polar coordinates;● create rectangular pockets;● apply circular pockets to position patterns.

Example 3: Mold plate

Learning objectivesIn this section you will learn the following new functions, in particular the contour calculator.You will learn how to...● mill open contours;● remove contour pockets from the solid, machine residual material and finish;● apply machining methods on several planes;● take into account obstacles.

Example 4: Lever

Learning objectivesIn this section you will learn the following new functions. You will learn how to...● perform face milling;● create edges (auxiliary pockets) for removing material from the solid around islands;● create and copy circular islands;● work with the work step editor and machine islands;● perform deep-hole drilling, helix milling, boring and thread milling;● program contours using polar coordinates (version 6.4 and higher).

Example 5: Flange

Learning objectivesIn this chapter you will learn how to ...● create a subroutine;● mirror work steps;● chamfer any contours, and● create longitudinal and circular grooves.