vhdl coding in xilinx

Post on 11-May-2015

2.747 Views

Category:

Self Improvement

2 Downloads

Preview:

Click to see full reader

DESCRIPTION

Basic steps to write a VHDL code in Xilinx ISE environment. Step-by-step picture is also shown to get the clear view of the process.

TRANSCRIPT

Following are the steps for writing and simulating VHDL code in Xilinx ISE environment.

1) Create New project from File Menu.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

2) Give the file name

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

3) Select options as shown below:

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

4) Press ‘Next’ two times in the follow-up windows and then ‘Finish’ at last.

5) Select New Source by clicking on project in sources window as shown below:

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

6) Select VHDL Module and name the file. Then click Next

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

7) Give port declarations as we do in entity. Then click Next. And then Finish.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

8) VHDL Code is presented on the screen. Now we just have to write the code in architecture.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

9) Select New Source by clicking on project in sources and then select Test Bench Waveform and name the file. Then Click Next two times and then Finish.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

10) A new window appears as shown below. For combinational circuits select combinatorial clock.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

11) Set the input waveforms by clicking on the waveform at different time intervals.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

12) Select Behavioural Simulation from sources window.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

13) Under Processes window simulate the file.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

14) The output simulations is observed at last.

Compiled By: Naveen KumarEmail: chd.naveen@gmail.com

Info-techgeek.blogspot.in

top related