ventilator simulation
Post on 23-Oct-2014
122 Views
Preview:
TRANSCRIPT
Choose Type of Patient: Head Injury drop-down list box
Alarms: - - -Volume A/C
0 0 ### NO% bpm sec L
FIO2 Rate Ti Vte
0 0 ### 56cmH2O cmH2O cmH2O mL/cmH2O
Ppeak Pplat Pmean Cstat
0 ###:### 0 ###L/min I:E cmH2O b2/min/L
PIFR MIP f/Vt
0 0.00 0 0 ***Rate Volume Peak Flow Insp Pause Pressure
Support
Settings
35 -0.20 3.0 -2.0 30.0 -15High Rate Low Vte High Vte Low Ve High Ve Low Ppeak
Please ignore this section
Head Injury ARDS S.A.CO2 #VALUE! #VALUE! #VALUE!O2 - no Peep X #VALUE! X
Peep #VALUE!Compliance 56 16 49Resistance 5 9 55SaO2 - Display 100%98%,99% 50
© 2009 - Ventilator Simulator "ASMSA"David R. Gibson Productions - All rights reserved.Please see disclaimer on "Instructions" tab below. Instructions Tab
Alarms: = Auto set = User set
90%-97% 5050%-89% 50
Types:Head InjuryARDSStatus Asthmaticus
_
- - - ver 3.1
Current ABG
pH ######L/m
PCO2 ###Total Ve
5PaO2 X
RpeakHCO3- 24
0 100%cmH2O BE ###PEEP
0 0 0Sens PEEP FIO2
40 -3 20High Ppeak Low PEEP Apnea
SaO2
© 2009 - Ventilator Simulator "ASMSA"David R. Gibson Productions - All rights reserved.Please see disclaimer on "Instructions" tab below.
Choose Type of Patient: ARDS drop-down list box
Alarms: #DIV/0!Pressure A/C
0 0 0.00 ###% bpm sec L
FIO2 Rate Ti Vte
### *** ### 18cmH2O cmH2O cmH2O mL/cmH2O
Ppeak Pplat Pmean Cstat
0 ###:### 0 ###L/min I:E cmH2O b2/min/L
PIFR MIP f/Vt
#DIV/0!
0 0 0.00Rate Insp I-time
Press
Settings
35 -0.20 3.0 -2.0 30.0 ###High Rate Low Vte High Vte Low Ve High Ve Low Ppeak
Please ignore this section
Head Injury ARDSCO2 #DIV/0! #DIV/0! Interval time #DIV/0!O2 - no Peep X #DIV/0! E-time #DIV/0!
Peep #DIV/0! Alveolar air #DIV/0!Compliance 55 18Resistance 5 6SaO2 - Display #DIV/0!98%,99% #DIV/0!
© 2009 - Ventilator Simulator "ASMSA"David R. Gibson Productions - All rights reserved.Please see disclaimer on "Instructions" tab below. Instructions Tab
Alarms: = Auto set = User set
Version Log:
2.0 Orig version, volume vent2.1 Errors corrected3.0 Pressure control, Status Asthmaticus added3.1 I:E Ratio calculation fixed
90%-97% #DIV/0!50%-89% #DIV/0!
TypesHead InjuryARDSStatus Asthmaticus
Version Log:
2.0 Orig version, volume vent2.1 Errors corrected3.0 Pressure control, Status Asthmaticus added3.1 I:E Ratio calculation fixed
#DIV/0!
#DIV/0! Ver. 3.0
Current ABG
pH #DIV/0!###L/m
PCO2 #DIV/0!Total Ve
6PaO2 #DIV/0!
RpeakHCO3- 24
### #DIV/0!cmH2O BE #DIV/0!PEEP
0 0 0PEEP Sens FIO2
40 -3 20High Ppeak Low PEEP Apnea
SaO2
© 2009 - Ventilator Simulator "ASMSA"David R. Gibson Productions - All rights reserved.Please see disclaimer on "Instructions" tab below.
Version Log:
2.0 Orig version, volume vent2.1 Errors corrected3.0 Pressure control, Status Asthmaticus added3.1 I:E Ratio calculation fixed
Version Log:
2.0 Orig version, volume vent2.1 Errors corrected3.0 Pressure control, Status Asthmaticus added3.1 I:E Ratio calculation fixed
Circled Values can be changed
Monitored Parameters can not be changed
Compliance Resistance
Total Rate I-timeexhaled Volume
Minute Volume
PIP Plateau
Monitored Parameters can not be changed
Observe how ventilator changes affect the ABG
values.
Disclaimer:This simulator is for training purposes only. Not to be used for clinical decision making.
The design of this simulator is not meant to endorse any particular product, nor is it sponsored by any product or manufacturer.
top related