vectorizing in inkscape - cutterpros.com€¦ · inkscape , start in section 1. if using an image...

VectorizingVectorizing in in InkscapeInkscape

For For SigncutSigncut

11--1 1 VectorizingVectorizing

�� Start with a nonStart with a non--vectorizedvectorized image.image.

�� If using an image created in If using an image created in

InkscapeInkscape, start in Section 1., start in Section 1.

�� If using an image on your computer, If using an image on your computer,

skip to Section 2 (Page 8).skip to Section 2 (Page 8).

11--1 Image in 1 Image in InkscapeInkscape

�� Highlight the entire image by dragging your Highlight the entire image by dragging your mouse around the borders, or hitting CTRL:A on mouse around the borders, or hitting CTRL:A on your keyboard.your keyboard.

11--2 Image in 2 Image in InkscapeInkscape

�� Go to the Edit Go to the Edit MenuMenu

�� Select: Select: ““Make a Make a Bitmap CopyBitmap Copy””

11--3 Image in 3 Image in InkscapeInkscape

�� The image should now have just one box The image should now have just one box

around the entire image. around the entire image.

Before After

11--4 Image in 4 Image in InkscapeInkscape

�� Click and drag the new image to the side.Click and drag the new image to the side.

�� The old image will be underneath the new The old image will be underneath the new image. image.

11--5 Image in 5 Image in InkscapeInkscape

�� Highlight the Highlight the old image and old image and delete it. delete it.

�� There should There should now just be now just be one image on one image on the screen. the screen.

22--1 1 VectorizingVectorizing

�� Select the image.Select the image.

�� There should be a There should be a

box with arrows box with arrows

surrounding it once surrounding it once

selected.selected.

�� Do not select any Do not select any

text during this text during this

process.process.

22--2 2 VectorizingVectorizing

�� Click the Path Click the Path menu.menu.

�� Select Select ‘‘Trace Trace BitmapBitmap’’

22--3 3 VectorizingVectorizing

� In the following screen you are mainly going to use ‘Brightness Cutoff’but other options are also available.

� Uncheck ‘Smooth’

� Uncheck ‘Stack Scans’

� Check ‘Remove Background’

22--4 4 VectorizingVectorizing

�� Click Click ‘‘UpdateUpdate’’ to see the results. to see the results.

�� If the desired results are not acquired, click the other optionsIf the desired results are not acquired, click the other options to see to see different views. different views.

�� Once the desired results are acquired, click Once the desired results are acquired, click ‘‘OKOK’’..

�� Click the Click the ‘‘XX’’ to close the screen.to close the screen.

Brightness Cutoff Edge Detection

22--5 5 VectorizingVectorizing

�� The The vectorizedvectorized

image will show up image will show up

directly on top of directly on top of

the original image. the original image.

22--6 6 VectorizingVectorizing

�� Click the image and drag it to the side.Click the image and drag it to the side.

�� Two images should now be visible.Two images should now be visible.

22--7 7 VectorizingVectorizing

�� Click the old image Click the old image and delete it.and delete it.

�� There should now There should now be just one image be just one image on the screen.on the screen.

�� This image is This image is vectorizedvectorized and and ready to cut!ready to cut!

22--8 Saving & Cutting8 Saving & Cutting

�� To save the image, To save the image,

go to File: Save As.go to File: Save As.

22--9 Saving & Cutting9 Saving & Cutting

�� Browse to the folder to save the file in.Browse to the folder to save the file in.

�� Name the file at the top of the page. Be sure the file name has Name the file at the top of the page. Be sure the file name has no spaces. The file no spaces. The file may not open correctly in may not open correctly in SigncutSigncut if spaces are in the file name. if spaces are in the file name.

�� Save it as an .Save it as an .epseps file on the bottom. file on the bottom.

22--10 Saving & Cutting10 Saving & Cutting

�� Check all boxes on Check all boxes on this page and click this page and click OK.OK.

�� If the image will If the image will need future need future editing, save as an editing, save as an ..svgsvg file also.file also.

22--11 Saving & Cutting11 Saving & Cutting

�� To send the file to To send the file to

SigncutSigncut, click , click

‘‘Effects: Export: Effects: Export:

Send to Send to SigncutSigncut’’

�� If Export is not If Export is not

available, see next available, see next

page.page.

22--12 Saving & Cutting12 Saving & Cutting

�� Open Open SigncutSigncut..

�� Click the Folder icon on the top left corner Click the Folder icon on the top left corner

of the screen. of the screen.

22--13 Saving & Cutting13 Saving & Cutting

�� Browse for the folder where the file is saved.Browse for the folder where the file is saved.

�� Click the file, and click Open.Click the file, and click Open.

22--14 Saving & Cutting14 Saving & Cutting

�� The image is now on The image is now on SigncutSigncut and ready to and ready to cut. cut.

The EndThe EndPlease review our tutorials for more information on particular Please review our tutorials for more information on particular

features.features.

http://http://www.cutterpros.comwww.cutterpros.com/downloads/downloads for further information. for further information. To speak with a technician, submit a ticket at To speak with a technician, submit a ticket at

http://http://www.cutterpros.comwww.cutterpros.com/support//support/ or call 888or call 888--828828--8776 x2278776 x227

CutterPros.comCutterPros.com/Hahn Ventures LLC/Hahn Ventures LLC is NOT liable for any software/attachments/instructions/downloadis NOT liable for any software/attachments/instructions/download links/content links/content contained in this presentation. Use the contents of this presentcontained in this presentation. Use the contents of this presentation AT YOUR OWN RISK. ation AT YOUR OWN RISK. CutterPros.comCutterPros.com/Hahn /Hahn Ventures LLCVentures LLC is NOT responsible for any damages incurred to your computer haris NOT responsible for any damages incurred to your computer hardware/software or any possible dware/software or any possible viruses/Trojans/malware or any other type of damaging programs tviruses/Trojans/malware or any other type of damaging programs that may be contained in the links and/or hat may be contained in the links and/or attachments. It is your responsibility to verify the contents beattachments. It is your responsibility to verify the contents before using any of the information contained in this fore using any of the information contained in this presentation. By using the contents in this email you agree to hpresentation. By using the contents in this email you agree to hold old CutterPros.comCutterPros.com/Hahn Ventures LLC/Hahn Ventures LLC harmless of all harmless of all liability and damages. You liability and damages. You agree that you are totally responsible for what you put on your agree that you are totally responsible for what you put on your computer, software you computer, software you install on your computer and install on your computer and files you download to your computer.files you download to your computer.