tools bosch delphi and more back-leak control2020/03/05 · for all type of common rail injectors...
Post on 21-Jan-2021
15 Views
Preview:
TRANSCRIPT
1
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
BACK-LEAK CONTROL
AZ0134-10CRM KIT OF BURETTE TO CHECK BACK -
LEAK
Kit of 6 Burettes traditonal plus nr. 6 burettes for Mercedes to
check the back leak directly from the engine.
For all type of common rail injectors (Bosch, Delphi,
Siemens/VDO and Denso)
FOR MORE BACK LEAK CONNECTION PLEASE SEE THE DEDICATED
CHAPTER IN THIS CATALOGUE.
AZ0134-12CR KIT OF BURETTE TO CHECK BACK LEAK
+ BACK LEAK CONNECTIONS
Kit of 6 Burettes traditonal plus nr. 6 burettes for Mercedes to
check the back leak directly from the engine.
For all type of common rail injectors (Bosch, Delphi,
Siemens/VDO and Denso)
Plus connections for common rial injectors Bosch, Delphi
Siemens/VDO and Denso.
AZ0134-10KIT KIT OF BACK-LEAK CONNECTORS
Connections for common rial injectors Bosch, Delphi
Siemens/VDO and Denso.
2
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
PULLERS
AC0800-KIT KIT OF TOOLS TO UNBLOCK THE NOZZLEHOLDERS CR BOSCH
Kit of tools to unblock the common rail injectors directly into the engine.
To use when the injector is completly blocked in the engine. The kit consists of nr. 3 wrench-clamp for the
following injectors:
AC0800-CR Bosch PSA
AC0800-CR1 Bosch Mercedes
AC0800-CR2 Bosch Fiat
AC0800-CR WRENCH-CLAMP FOR INJECTOR PSA
To use with polygonal wrench or socket wrench 36mm.
Once the injector is unlocked use one of our pullers AE0400-CR or
AE0226-00 to remove it. If the nozzle-nut remains inside the engine use
our kit AE0271-CR.
AC0800-CR1 WRENCH-CLAMP FOR INJECTOR MERCEDES
To use with polygonal wrench or socket wrench 36mm.
Once the injector is unlocked use one of our pullers AE0400-CR or
AE0226-00 to remove it. If the nozzle-nut remains inside the engine use
our kit AE0271-CR.
AC0800-CR2 WRENCH-CLAMP FOR INJECTOR FIAT
To use with polygonal wrench or socket wrench 36mm.
Once the injector is unlocked use one of our pullers AE0400-CR or
AE0226-00 to remove it. If the nozzle-nut remains inside the engine use
our kit AE0271-CR.
3
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
4
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLERS
AE0226-00AE0400-CR
TOOLS BOSCH – DELPHI and MORE
AE0271-CR PULLER FOR INJECTOR NUT – INSIDE THE ENGINE -
Kit composed of:
Nr. 2 taps
Nr. 1 extension
When the injectors are blocked inside the engine, often happens that the injector-nut remains inside the
engine. Our AE0271-CR permits to remove it.
Little instructions:
Use the tap marked 02 and create a thread inside the nut stucked in the engine, therafter use the tap marked
01 and thread again tring to go in deep.
Assemble the extension, from the side with thread 16x1.5, inside the injector nut and screw on the opposite
side (with thread 14x1.5) one sliding hammer and extract the nut. We suggest to use our sliding hammers
AE0226-00 and/or AE0400-CR.
5
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLERS
AE0401-CR01 ANGLE CONNECTION
For puller AE0400-CR
Connection for vertical extraction
AE0401-CR02 ANGLE CONNECTION
For puller AE0400-CR
Connection for vertical extraction
AE0401-CR03 ANGLE CONNECTION
For puller AE0400-CR
Connection for vertical extraction
TOOLS BOSCH – DELPHI and MORE
AE0400-CR PULLER FOR COMMON RAIL INJECTOR
Universal puller to extract all kind of injectors, from traditional ones to common rail Bosch, Delphi, Siemens
and Denso
It permits to extract the injectors working outside the vehicle, outside of the engine compartment.
It has been designed to extract the injectors placed in restricted area.
It is possible to see how the puller works on YOUTUBE digiting FILMAE0400
6
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLERS
AE0500-CR PULLER FOR COMMON RAIL INJECTIORS WITH HYDRAULIC PUMP
Complete tool kit to pull out injectors from the engine
The kit consists of a fixing-part adjustable specifically designed.
With pneumatic hydraulic pump.
TOOLS BOSCH – DELPHI and MORE
7
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLERS
AE0247-04 PULLER FOR BOSCH CR INJECTOR
Thread 27x1mm.
To use with AE0226-00
AE0247-04A PULLER FOR INTERNAL-FIXING OF CR
INJECTORS BOSCH.
Thread 17x1mm.
To use with AE0226-00
AE0226-00 SLIDING HAMMER Lenght: 340 mm
AE0226-01 SLIDING HAMMER Lenght: 480 mm
AE0247-14 DOUBLE PULLER FOR COMMON RAIL INJECTORS
BOSCH.
Inner thread 17x1mm (our AE0247-04A)
Outer thread 20x1mm.
TOOLS BOSCH – DELPHI and MORE
8
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AE0247-02 PULLER FOR IVECO TECTOR
AE0247-02C PULLER FOR MERCEDES
AE0247-01 PULLER FOR MERCEDES –NUDE-
Similar: 0.986.612.728
To use with AE0226-00
AE0247-07 PULLER FOR SPRINTER
TOOLS BOSCH – DELPHI and MORE
9
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AE0247-11 PULLER FOR FIAT ULISSE – PEOGEOT 807
CITROEN EVASION.
AE0247-12 PULLER FOR DELPHI INJ. ON REXTON 2.7
TOOLS BOSCH – DELPHI and MORE
AE0247-20 PULLER FOR DELPHI INJECTORS
Puller for injectors Delphi on Mercedes (2.1 CDI) and Hyundai (1.5)
Engine code: OM651 – EMBR – EJBR – EJDR
Also for injectors Delphi Piezo.
AE0247-21 PULLER FOR INJECTORS ENGINE VM
Puller for injectors on engine VM
For injectors VM code: VM 15062044
10
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
COMPARATOR BEARING and VICE
AAZ006-KIT COMPARATOR BEARING FOR COMMON RAIL
INJECTORS – WITH DIGITAL TOUSANDTH
COMPARATOR
Comparator bearing with 2 fixing part for common rail nozzleholders (17 and
19mm) with digital millesimal comparator
AAZ006-CR COMPARATOR BEARING FOR COMMON RAIL
INJECTORS – WITHOUT DIGITAL TOUSANDTH
COMPARATOR
Comparator bearing with 2 fixing part for common rail nozzleholders (17 and
19mm) without digital millesimal comparator
AZ0352-CR SWIVEL PRESS TO REPAIR COMMON RAIL INJ.
Similar: 0.986.610.130
To use on vice AA2919-01 or AZ0134-0A
AZ0352-CR-LIGHT SWIVEL PRESS TO REPAIR COMMON RAIL
INJ - WITHOUT COMPARATOR BEARING.
Similar: AZ0134-BN100
To use on vice AA2919-01 or AZ0134-0A
AAZ006-MIL MILLESIMAL DIGITAL COMPARATOR
Stroke from 0 to 15mm
TOOLS BOSCH – DELPHI and MORE
11
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0062-00 BOX WITH PLATE TO MOVE INJECTORS
Plastic box with pierced plate to transport in safety injectors and unit-
injectors (without damaging the pulverizers)
AB0129-CR UNIVERSAL CLAMP FOR COMMON RAIL
Clamp to use with vice – Universal -
AA2919-01 BASE FOR SWIVEL VICE
AZ0134-0A BASE FOR SWIVEL VICE
TOOLS BOSCH – DELPHI and MORE
12
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0356-CR SHAPED TRAY WITH 6 SPACES
Inox shaped tray with nr. 6 numbered spaces to dismantle injectors.
TOOLS BOSCH – DELPHI and MORE
AZ0355-CR SWIVEL PLATE MULTI-INJECTORS
Swivel plate to fix maximum 4 injectors (CRI – CRIN) at the same time. The plate rotates 180° degrees and
it can be fixed in every position.
The plate can be fixed on a traditonal vice or on our vice AA2919-00.
To work fast and with more comfort we suggest also our shaped plate AZ0356-CR.
Designed with support of an italian diesel specialist.
13
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0313-CR + AZ0313-CELL
Tools to dismantle and assembly of common rail injectors and unit-injectors
Similar: 0.986.613.400 – 0.986.613.500 – 0.986.612.997
TOOLS BOSCH – DELPHI and MORE
14
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AZ0313-CR TOOL TO DISMANTLE AND ASSEMBLE COMMON
NOZZLEHOLDERS AND UNIT-INJECTOR.
Similar: 0.986.613.400 and 0.986.613.500
AZ0313-CELL FORCE PICK UP WITH DIGITAL FORCE INDICATOR
Similar: 0.986.612.997
Measure: from 0 to 2500 kg (25000 Newton)
AZ0313-CR500 PLATE TO TRASFORM THE TOOL ORIGINAL
BOSCH 0.986.613.400 IN COMMON RAIL
Similar: 0.986.613.500
These plates, AZ0313-CR500, are included in our tool AZ0313-CR. The
code AZ0313-CR500 is sold also individually.
AZ0313-CRKIT KIT OF 3 PLATES FOR UNIT-INJECTOR
The kit is composed with:
AZ0313-CR04 – For Truck
AZ0313-CR428 – Similar: 0.986.913.428 – VW 1°-2° Serie
AZ0313-CR429 – Similar: 0.986.613.429 – VW 3° Serie
The plates are sold also individually
AZ0313-DISC KIT 3 GRADUATED DISCS
Kit of 3 graduated discs with 3 different diameters
Degree: from 0 to 180
These discs, AZ0313-DISC, are included in our tool AZ0313-CR. The code
AZ0313-DISC is sold also individually.
15
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AZ0313-CR01 PULVERIZER FIXING BUSH 7 MM.
To fix the tip of the pulverizer of common rail injectors and unit-injector
VW of 7 mm.
The code, AZ0313-CR01, is included in our tool AZ0313-CR. The code
AZ0313-CR01 is sold also individually.
AZ0313-CR02 PULVERIZER FIXING BUSH 9 MM.
To fix the tip of the pulverizer of common rail injectors and unit-injectors
VW of 9 mm.
The code, AZ0313-CR02, is included in our tool AZ0313-CR. The code
AZ0313-CR02 is sold also individually.
AZ0313-CR417 PULVERIZER FIXING BUSH 7 MM WITH STEP.
To fix the tip of the pulverizer of unit-injector VW of 7 mm with step.
Similar: 0.986.613.417
The code, AZ0313-CR4171, is included in our tool AZ0313-CR. The code
AZ0313-CR417 is sold also individually.
AZ0313-KIT KIT OF PULVERIZER FIXING BUSHES
Kit of 3 pulverizer fixing bushes for common rail injectors and unit-injectors
of 7mm – 7 mm with step– 9 mm.
The kit includes the following codes: AZ0313-CR01 + AZ0313-CR417 +
AZ0313-CR02.
The code, AZ0313-KIT, is included in our tool AZ0313-CR. The code
AZ0313-KIT is sold also individually.
AZ0313-CR427 ELASTIC CAPSULE – PICK UP SPRING
Elastic capsule – pressure 700 Nm – 70 Kg.
Similiar: 0.986.613.427
16
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TORQUE WRENCHES
AC0516-CR TORQUE WRENCH
Connection: 14x18mm
Nm: from 20 to 100 Nm
AC0516-CR1 TORQUE WRENCH
Connection: 9x12mm
Nm: from 4 to 20 Nm
AC0516-3S DIGITAL TORQUE WRENCH
On the display you see the screw up parameters (Nm and degrees)
Connection: 9x12mm
Made in Italy
Sold with:
AC0516-27 – flat wrench 27mm engage connection 9x12
AC0516-CR3 – ratchet wrench with conn. 9x12
AC0516-CR3 RATCHET WRENCH
Engage connection: 9x12mm
Connection ½”
AC0516-CR2 RATCHET WRENCH
Engage connection: 14x18mm
Connection: ½”
TOOLS BOSCH – DELPHI and MORE
17
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AC0516-CR4 ADAPTOR FOR TORQUE WRENCH
Connection: 14X18 (F) – 9X12(M)
To convert the connection of torque wrench from 9X12 to 14x18
WRENCHES CONNECTION 9X12mm
AC0516-27 FLAT WRENCH 27MM
Connection: 9x12mm
Wrench dimension: 27mm
AC0516-25 FLAT WRENCH 25MM
Connection: 9x12mm
Wrench dimension: 25mm
AC0516-29 FLAT WRENCH 29MM
Connection: 9x12mm
Wrench dimension: 29mm
AC0516-30 FLAT WRENCH 30MM
Connection: 9x12mm
Wrench dimension: 30mm
TOOLS BOSCH – DELPHI and MORE
TORQUE WRENCHES
18
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
POLYGONAL WRENCH CONNECTION 9 X 12
AC0516-14 Wrench of 14
AC0516-15 Wrench of 15
AC0516-17 Wrench of 17
AC0516-19 Wrench of 19 To dismantle VDO injector’s nut
WRENCH CONNECTION 14X18mm
FLAT WRENCH CONNECTION 14 X 18
AC0516-CR22 Wrench of 22
AC0516-CR25 Wrench of 25
AC0516-CR27 Wrench of 27
AC0516-CR29 Wrench of 29
AC0516-CR30 Wrench of 30
AC0516-CR36 Wrench of 36 To dismantle sensor on VDO pumps
TOOLS BOSCH – DELPHI and MORE
19
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0061-CR COMPLET TOOL KIT TO DISMANTLE BOSCH INJECTORS CRI+CRIN
Similar: 0.986.613.650 + 0.986.613.669
Our tool-kit is composed of all the tools you need to dismantle and to assemble common rail injectors Bosch
CRI & CRIN.
The AZ0061-CR tool kit contains all the tools of AZ0018-CRI and AZ0060-CRIN (see next pages) but
without AB0122-01, AB0122-02, AB0122-03.
AZ0061-CR LIST OF THE TOOLS INSIDE AZ0061-CR:
AC0500-00 AC0483-12TX
AC0501-00 AC0483-10TX
AAZ034-24-1 AAZ034-699
AZ0044-01 AC0498-00
AC0483-0N AC0509-00
AAZ034-623 AAZ034-646
AAZ034-626 AAZ034-648
AAZ034-667 AAZ034-408
AAZ034-668 AAZ034-619
AAZ034-618 AAZ034-640
AAZ034-613 AAZ034-682
AAZ034-616 AAZ034-628
TOOLS BOSCH – DELPHI and MORE
20
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0018-CRI COMPLETE TOOL KIT TO DISMANTLE BOSCH INJECTORS CRI
Similar: 0.986.613.650
Our tool-kit is composed of all the tools you need to dismantle and to assemble common rail injectors Bosch
CRI.
List of the tools inside AZ0018-CRI:
AB0122-01 CLAMP
Wrench dimension: 11-12-13-19mm
In tool-box AZ0018-CRI – Sold also individually
AB0122-02 CLAMP
Wrench dimension: 14-16-20mm
In tool-box AZ0018-CRI – Sold also individually
AB0122-03 CLAMP
Wrench dimension: 15-17-18-22mm
In tool-box AZ0018-CRI – Sold also individually
TOOLS BOSCH – DELPHI and MORE
21
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AC0500-00 DISMANTLE WRENCH FOR SOLENOID
Hexagon 29mm
Similar 0.986.613.633
In tool-box AZ0018-CRI – Sold also individually
AC0501-00 DISMANTLE WRENCH FOR SOLENOID
Hexagon 30mm
Similar 0.986.613.638
In tool-box AZ0018-CRI – Sold also individually
AAZ034-24-1 ANTIMAGNETIC PLIERS WITH INVERSE OPENING
In tool-box AZ0018-CRI – Sold also individually
TOOLS BOSCH – DELPHI and MORE
AZ0044-01 FIBER RING PULLER
In tool kit AZ0018-CRI and AZ0044-00 – Sold also individually
AC0483-0N DOUBLE-WRENCH FOR INTERNAL RING-NUT
Hexagon 10mm – Hole 6.5mm
Hexagon 10mm – Hole 7,5mm
Similar 0.986.613.630
In tool kit AZ0018-CRI – Sold also individually
AAZ034-623 PULLER FOR BAR AND VALVE
Thread: 15mm
Similar 0.986.613.623
In tool kit AZ0018-CRI – Sold also individually
AAZ034-626 PULLER FOR BAR AND VALVE
Thread: 17mm
Similar 0.986.613.626
In tool kit AZ0018-CRI – Sold also individually
22
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AAZ034-667 THREAD PROTECTION WITH SUPPORT BASE
Thread: 15mm
Similar 0.986.613.667
In tool kit AZ0018-CRI – Sold also individually
AAZ034-668 THREAD PROTECTION WITH SUPPORT BASE
Thread: 17mm
Similar 0.986.613.668
In tool AZ0018-CRI – Sold also individually
AAZ034-619 PULLER AND INSERTER FOR SOLENOID SEEGER
Similar 0.986.613.619
In tool kit AZ0018-CRI – Sold also individually
AAZ034-618 INSERTER FOR SOLENOID OR
Similar 0.986.613.618
In tool kit AZ0018-CRI – Sold also individually
AAZ034-640 FIBER RING POSITIONING TOOL
Similar 0.986.613.640
In tool kit AZ0018-CRI – Sold also individually
23
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AAZ034-613 INSERTER OF THE VALVE
Similar 0.986.613.613
In tool kit AZ0018-CRI – Sold also individually
AAZ034-682 TOOL TO REPAIR THE THREAD OF HIGH-
PRESSURE IN-LET CONNECTION
Similar 0.986.613.682
In tool kit AZ0018-CRI – Sold also individually
24
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0060-CRIN COMPLET TOOL KIT TO DISMANTLE BOSCH INJECTORS CRIN
Similar: 0.986.613.699
Our tool-kit is composed of all the tools you need to dismantle and to assemble common rail injectors Bosch
CRIN.
List of the tools inside AZ0060-CRIN:
TOOLS BOSCH – DELPHI and MORE
AAZ034-628 PULLER FOR BAR AND VALVE
Thread: 19mm
Similar 0.986.613.628 –
In tool kit AZ0060-CRIN. Sold also individually
AAZ034-616 INSERTER FOR SOLENOID SEEGER
Similar 0.986.613.616
In tool kit AZ0060-CRIN. Sold also individually
25
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AC0483-12TX WRENCH FOR INTERNAL RIGN-NUT 12 TORX
Torx
Similar 0.986.613.631
In tool kit AZ0060-CRIN. Sold also individually
AC0483-10TX WRENCH FOR INTERNAL RING-NUT 10 TORX
Torx
Similar 0.986.613.632
In tool kit AZ0060-CRIN. Sold also individually
AAZ034-669 THREAD PROTECTION WITH SUPPORT BASE
Thread 19mm
Similar 0.986.613.669
In tool kit AZ0060-CRIN. Sold also individually
AC0498-00 DISMANTLE WRENCH FOR TECTOR SOLENOID
Wrench dimension: 28mm 12 sides
Similar 0.986.613.184
In tool kit AZ0060-CRIN. Sold also individually
AC0509-00 DISMANTLE WRENCH FOR MAN SOLENOID
Wrench dimension: 27mm 12 sides
Similar 0.986.613.185
In tool kit AZ0060-CRIN. Sold also individually
26
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AAZ034-408 TOOL TO MEASURE THE ANGLE
Similar 0.986.612.408
In tool kit AZ0060-CRIN. Sold also individually
AAZ034-646 FIBER RING POSITIONING TOOL
Similar 0.986.613.646
In tool kit AZ0060-CRIN. Sold also individually
AAZ034-648 FIBER RING POSITIONING TOOL
Similar 0.986.613.648
In tool kit AZ0060-CRIN. Sold also individually
27
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
WRENCHES
AZ0501-CR25 FLAT WRENCH 25mm – with connection ½"
AZ0501-CR14 FLAT WRENCH 14mm – with connection ½"
AZ0501-CR15 FLAT WRENCH 15mm – with connection ½"
AZ0501-CR17 FLAT WRENCH 17mm – with connection ½"
AZ0501-CR19 FLAT WRENCH 19mm – with connection ½"
AZ0501-CR24 FLAT WRENCH 24mm – with connection ½"
AZ0501-CR26 FLAT WRENCH 26mm – with connection ½"
AZ0501-CR27 FLAT WRENCH 27mm – with connection ½"
AZ0501-CR29 FLAT WRENCH 29mm – with connection ½"
AZ0501-CR30 FLAT WRENCH 30mm – with connection ½"
AZ0501-CR32 FLAT WRENCH 32mm – with connection ½"
AZ0501-CR36 FLAT WRENCH 36mm – with connection ½"
TOOLS BOSCH – DELPHI and MORE
AZ0501-CR KIT OF 6 OPEN WRENCHES TO DISMOUNT CR
INJECTORS
Wrench dimensions: 15, 17, 19, 27, 29 and 30mm.
Each single wrench is also sold individually with code:
AZ0501-CR15; AZ0501-CR17; AZ0501-CR19; AZ0501-CR27; AZ0501-
CR29; AZ0501-CR30.
28
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AC0483-12TX WRENCH FOR INTERNAL RIGN-NUT 12 TORX
Torx
Similar 0.986.613.631
In tool kit AZ0060-CRIN. Sold also individually
AC0483-10TX WRENCH FOR INTERNAL RING-NUT 10 TORX
Torx
Similar 0.986.613.632
In tool kit AZ0060-CRIN. Sold also individually
AC0483-0N DOUBLE-WRENCH FOR INTERNAL RING-NUT
Hexagon 10mm – Hole 6.5mm
Hexagon 10mm – Hole 7,5mm
Similar 0.986.613.630
In tool kit AZ0018-CRI – Sold also individually
AC0498-00 DISMANTLE WRENCH FOR TECTOR SOLENOID
Wrench dimension: 28mm 12 sides
Similar 0.986.613.184
In tool kit AZ0060-CRIN. Sold also individually
AC0509-00 DISMANTLE WRENCH FOR MAN SOLENOID
Wrench dimension: 27mm 12 sides
Similar 0.986.613.185
In tool kit AZ0060-CRIN. Sold also individually
AC0491-00 WRENCH TO DISMANTLE DELPHI INJECTORS
Wrench dimension: 21mm
29
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PLIERS FOR OUTER O-RINGS OF INJECTORS
TOOLS BOSCH – DELPHI and MORE
AC0499-00 WRENCH WITH 3 PINS TO OPEN INTERNAL
RING-NUT OF RAIL DELPHI
AAZ034-33 PLIERS FOR OUTER O-RINGS ON CRIN INJECTORS
AAZ034-50 KIT OF 3 PLIERS FOR OUTER O-RINGS OF
INJECTORS
30
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
WRENCH TO DISMANTLE NOZZLE-NUT
AC0506-00 WRENCH X NUT – OCTAGONAL 17,5mm
For Daily 0.45.110.273
AC0506-16 WRENCH X NUT – OCTAGONAL 16mm
AC0515-00 WRENCH X NUT – OCTAGONAL 17mm
AC0506-01 WRENCH X NUT – OCTAGONAL 15mm
Per iniettori Bosch montati su BMW, es. 0.445.110.613
AC0506-09 WRENCH X NUT – 9 SIDES -
For VDO injectors
TOOLS BOSCH – DELPHI and MORE
AC0506-KIT KIT OF 4 WRENCHES TO OPEN THE PULVERIZER
NUT OF CR INJECTORS
AC0506-14 internal hexagon 14mm for Nippodenso
AC0506-15 internal hexagon 15mm Similar 0.986.610.151
AC0506-17 internal hexagon 17mm Similar 0.986.610.152
AC0506-19 internal hexagon 19mm Similar 0.986.610.153
To be used with open wrench AZ0501-CR27with engage-connection for
torque wrench.
Each single wrench is also sold individually.
31
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
OPENCLOSE
TOOLS BOSCH – DELPHI and MORE
AC0516-CR28 TOOTHED WRENCH OF 28MM
Star: 28 Measure engage connection: 14x18mm
Similar: 0.986.613.238
AC0516-CR32 TOOTHED WRENCH OF 32MM
Star: 32 Measure engage connection: 14x18mm
Similar: 0.986.613.238
AC0522-CR
Wrench to dismantle the bobbin of injector common rail «american» model with engage connection for
torque wrench.
Diam.: 30mm – 12 sides.
Engage connection: 14x18mm.
For injectors: 0.445.120.027 – 0.445.120.042 – 0.445.120.082
0.986.435.504 – 0.986.435.520 – 0.986.435.521
Similar: Bosch 0.986.610.384
32
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
DELPHI SMART INJECTOR
AZ0309-23 CLAMP TO FIX SMART INJECTOR DELPHI
- ON MERCEDES -
You can use it as a standard CRIN or with cam-box and its Delphi electronic
Unit pump (EUP).
(BEBJ1A00001)
TOOLS BOSCH – DELPHI and MORE
AC0551-00 WRENCH FOR NUT OF SMART INJECTOR DELPHI
Wrench to open the nut of injector Delphi Smart Injector
To open the nut without hexangons and holes
(BEBJ1A00001)
AZ0309-13 CLAMP TO FIX SMART INJECTOR DELPHI
You can use it as a standard CRIN or with cam-box and its Delphi electronic
Unit pump (EUP).
(BEBJ1A00001)
33
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLER X VALVE-SET
TOOLS BOSCH – DELPHI and MORE
AE0280-CR PULLER FOR VALVE-SET (VALVE GROUP) FOR CR
INJECTORS – CRI -
It permits to extract the valve set without dismounting the pulverizer side.
AE0281-CR PULLER FOR VALVE-SET (VALVE GROUP) FOR CR
INJECTORS –CRIN-
It permits to extract the valve set without dismounting the pulverizer
side.
PULLER X SOLENOID-BUSH
AE0285-CR PULLER FOR BOBBIN BUSH OF CR INJECTOR
BOSCH
Only for CRI 2.1
34
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PULLER + INSERTER FOR FIBER RING
AZ0044-00 KIT WITH PULLER AND INSERTER FOR FIBER-RING
AAZ034-640 FIBER RING POSITIONING TOOL
Similar 0.986.613.640
In tool kit AZ0018-CRI – Sold also individually
TOOLS BOSCH – DELPHI and MORE
AAZ034-646 FIBER RING POSITIONING TOOL
Similar 0.986.613.646
In tool kit AZ0060-CRIN. Sold also individually
AAZ034-648 FIBER RING POSITIONING TOOL
Similar 0.986.613.648
In tool kit AZ0060-CRIN. Sold also individually
35
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
MAINTENANCE «BALL-SEAT»
AZ0040-00 LAPPING TOOL KIT FOR BALL-SEAT OF COMMON RAIL INJECTORS BOSCH
The tool kit AZ0040-00 consists of the following tools:
Nr. 1 AC0483-0N Double-wrench to dismantle internal-ring nut of Bosch inj. CR –
Hole 6,5mm and 7,5mm.
Nr. 2 LAPPATORI One lapping tool to hone and the other one to polish
Nr. 1 GUIDE
Nr. 1 AZ0040-0A Abrasive paste grain 600
Nr. 1 AZ0040-0F Chrome paste to polish
TOOLS BOSCH – DELPHI and MORE
AZ0040-EL ELECTRICAL LAPPING-TOOL
Electrical tool to lap and polish the ball-seat of common rail injectors
Bosch.
36
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
MAINTENANCE «BALL-SEAT»
AZ0156-KIT KIT OF PASTES TO LAP COMPOSED OF 3 DIFFERENT GRAINS AND ONE
CHROME-PASTE.
• Lapping paste Grain 400 Micron AZ0156-400
• Lapping paste Grain 600 Micron AZ0156-600
• Lapping paste Grain 800 Micron AZ0156-800
• Chrome-paste AZ0156-CROM
Lapping paste must be used to rough-cut, to hone; the chrome to polish.
All different pastes are sold also individually.
TOOLS BOSCH – DELPHI and MORE
AZ0156-09 SYRINGE OF DIAMOND LAPPING PASTE
Syringe of DIAMOND lapping paste.
Grain 800
Finish 3 MICRON
Quantity: 20ml.
37
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AZ0503-04CR LENT ENLARGEMENT WITH LAMP WITH 6 LED
AZ0134-MO-01 GRINDING WHEEL IN SOFT CLOTH
To use on every grindmachine.
AZ0503-03 LENT STRONG ENLARGEMENT X10 WITH LAMP
AAZ034-24 PLIERS KIT IN INOX ANTI-MAGNETIC
AZ0134-MO-02 ABRASIVE PASTE TO POLISH THE HOLDING
BALL VALVE
To be used with grinding wheel in soft cloth (AZ0134-M0-01).
38
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
ENGINE CLEANING
TOOLS BOSCH – DELPHI and MORE
AAZ100-00 HOLDING-BALL VALVE POWER- TESTER
The kit AAZ100-00 includes nr. 1 vacuum tester (AAZ007-09N) and nr. 1
special cylindrical support (AAZ034-29).
The kit checks the power of the holding-ball valve to keep the vacuum in
the common rail Bosch injectors.
AAZ034-29 CYLINDRICAL SUPPORT FOR HOLDING-BALL
VALVE
Cylindrical support with calibrated hole to check the vacuum capacity of the
valves of common rail Bosch injectors.
The AAZ034-29 is included in kit AAZ100-00. Sold also individually
AAZ007-09N PRESSURE AND VACUUM TESTER
Pressure test till 4 bar
Vaccum test till -1bar
The code AAZ034-09N is included in kit AAZ100-00. Sold also
individually
AZ0050-00 TUBE-BRUSHES KIT
Kit of 36 tube-brushes to clean engine-head, nozzleholder’s seat and plug
seat.
Nr. 12 in copper diam. from 8 to 19 mm
Nr. 12 in steel diam. from 8 to 19mm
Nr. 12 in nylon diam. from 8 to 19mm
39
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AZ0037-01
Reamers kit for cleaning the internal seat of the common rail nozzleholder inside the engine. The kit is
composed of the following reamers:
AZ0037-17 Flat reamer diam. 17 for nozzleholders Delphi.
AZ0037-19 Flat reamer diam. 19 for nozzleholders Bosch.
AZ0037-21 Conical reamer diam. 21 for nozzleholders Bosch.
AZ0037-19A Flat reamer diam. 19 with step for nozzleholders
Bosch mounted on Mercedes (Sprinter).
40
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
AZ0037-15 Flat reamer diam. 15 for nozzleholders Bosch Piezo. Mounted
on Audi A6, BMW 330 and Audi A4 2000 tdi.
AZ0037-16 Conical reamer diam. 19 for nozzleholders Iveco Daily.
AZ0037-18 Conical reamer diam. 18 for unit-injectors Volkswagen
Audi.
AZ0037-21A Flat reamer diam. 21 for nozzleholders Tector and Man.
AZ0037-02
Reamers kit for cleaning the internal seat of the common rail nozzleholder and unit injector inside the
engine. The kit is composed of the following reamers:
41
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
BOSCH SPARE PARTS
BK0025-CR KIT 50 BALLS SIMILAR: F00VC05001 DIAM 1.34MM
BK0025-CRBH KIT 50 BALLS ORIGINAL BOSCH F00VC05001
BK0045-CR KIT 50 BALLS SIMILAR: F00VC05008 DIAM 1.34MM
BK0045-CRBH KIT 50 BALLS ORIGINAL BOSCH F00VC05008
BK0046-CR KIT 50 BALLS SIMILAR: F00VC05009 DIAM 1.50MM
BK0046-CRBH KIT 50 BALLS ORIGINAL BOSCH F00VC05009
- BALLS IN CERAMIC -
BK0047-CR KIT 50 BALLS SIMILAR: F00VC05009 DIAM 1.50MM
- BALLS IN IRON -
BK0024-CR KIT OF SPARE PARTS FOR C.R INJECTORS
BK0034-CR KIT FIBER RING (BK0026-CR) +
OIL SEAL (BK0027-CR) SIMILAR: F00VC99002
BK0034-CRBH KIT FIBER RING + OIL SEAL
ORIGINAL BOSCH F00VC99002
BK0028-CR KIT 20 FIBER RINGS (BK0026-CR) + 50 BALLS
(BK0025-CR)
BK0029-CR SOLENOID SPRING HOLDER FOR CR BOSCH INJ.
BK0026-CR FIBER RING
TOOLS BOSCH – DELPHI and MORE
42
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
COPPER WASHERS KIT
1) AZ0023-CR1 Measure : 7.3 x 13.6 x 2mm KIA
2) AZ0023-CR2 Measure : 7.3 x 13.6 x 3mm KIA
Washers, as photo on the left, of the following dimensions:
3) AZ0023-CR3 Measure : 7.5 x 16.5 x 2mm SPRINTER
4) AZ0023-CR4 Measure : 7.5 x 15.5 x 1mm ROVER - MAN
5) AZ0023-CR5 Measure : 7.5 x 15 x 1.5mm ULYSSE
6) AZ0023-CR6 Measure : 7.5 x 13.5x 1.5mm FOCUS
7) AZ0023-CR7 Measure : 7.5 x 13 x 1.5mm DEUTZ
8) AZ0023-CR8 Measure : 7.5 x 15 x 3mm SCENIC
9) AZ0023-CR9 Measure : 7.5 x 15.5 x 1.5mm LAND ROVER
10) AZ0023-CR10 Measure : 7.5 x 15.5 x 2.5mm FIESTA
TOOLS BOSCH – DELPHI and MORE
AZ0023-CR it is a box with copper washers that are placed internal to the engine, at the base of the common
rail nozzleholders or injector-pumps.
The tool kit is composed of 19 different type of washers (50 pieces for each kind of washer) and back leak
connections with 1 and 2 out.
43
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
11) AZ0023-CR11 MAZDA
12) AZ0023-CR12 Measure : 8 x 15.45 x 2mm CON GRADITO / WITH STEP
13) AZ0023-CR13 Measure : 7.5 x 15 x 2mm CON TACCHE INTERNE - IVECO – FORD –
BMW - MAN
14) AZ0023-CR14 Measure : 7.5 x 15 x 1.5mm CON TACCHE INTERNE - IVECO – FORD
– BMW - MAN
15) AZ0023-CR15 Measure : 7.5 x 13 x 2.5mm CON TACCHE INTERNE MEGANE
16) AZ0023-CR16 Measure : 7 x 15 x 1.5mm WITH STEP MERCEDES
17) AZ0023-CR17 Measure : 8 x 15 x 1.5mm CON TACCHE INTERNE BOMBATE
FIAT – SIEMENS/VDO
18) AZ0023-CR18 Measure : 6 x 10 x 1mm STEEL
19) AZ0023-CR19 Injector base washer in BRASS VOLKSWAGEN
20) AZ0023-CR20 Injector base ring VOLKSWAGEN
21) AZ0023-CR22
Clips22) AAZ034-26
1 way connection
23) AAZ034-26T
2 ways connection
TOOLS BOSCH – DELPHI and MORE
44
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
INJECTOR BASE WASHERS
All the different type of washers in our box-kit AZ0023-CR and AZ0024-CR are sold also individually.
Minumum of order nr. 50 pieces of each kind of washer.
AZ0024-CR KIT OF WASHERS LIGHT VERSION
Injectors base washers kit LIGHT version; it has the same codes of our box-
kit AZ0023-CR but with a less quantity of washers.
The list of codes is the same as AZ0023-CR
OTHER MEASURES:
AZ0023-CR26
Rosetta basamento iniettori in rame - Injector base washer in copper
Similar VDO: X11-800-002-004Z
AZ0023-CR27
Rosetta basamento iniettori in rame- Injector base washer in copper
Similar VDO: X11-800-002-003Z
AZ0023-CR28
Rosetta basamento iniettori in rame - Injector base washer in copper
Similar VDO: X11-800-002-002Z
AZ0023-CR29
Rosetta basamento iniettori in rame - Injector base washer in copper
Similar VDO: X11-800-002-001Z
AZ0023-CR25
Rosetta basamento iniettori in rame - Injector base washer in copper
7 x 13,7 x 1,8mm FORD
TOOLS BOSCH – DELPHI and MORE
45
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0023-CR30
Rosetta base iniettori in ALLUMINIO - Injector base washer in ALUMINIUM
20 x 14 x 1,5mm
AZ0023-CR31
Rosetta basamento iniettori in rame - Injector base washer in copper
14 x 10 x 0,80mm
AZ0023-CR32
Rosetta basamento iniettori in rame - Injector base washer in copper
15 x 7 x 1mm Nissan 16635-J20000S
AZ0023-CR33
Rosetta basamento iniettori in rame - Injector base washer in copper
15 x 8 x 1mm
AZ0023-CR34
Rosetta basamento iniettori in rame - Injector base washer in copper
20 x 14 x 1,5mm Bosch: 2.916.710.610
AZ0023-CR35
Rosetta basamento iniettori in rame - Injector base washer in copper
20 x 15 x 1,5mm
AZ0023-CR36
Rosetta basamento iniettori in rame - Injector base washer in copper
18 x 14 x 1,5mm Bosch: 2.916.710.609
AZ0023-CR37
Rosetta basamento iniettori in rame - Injector base washer in copper
16 x 12 x 1,5mm
AZ0023-CR38
Rosetta basamento iniettori in rame - Injector base washer in copper
14 x 10 x 1,5mm
TOOLS BOSCH – DELPHI and MORE
INJECTOR BASE WASHERS
46
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0023-CR40
Rosetta basamento iniettori in rame - Injector base washer in copper
34 x 28 x 1,5mm
BK0052-23
Rosetta basamento iniettori in rame - Injector base washer in copper
Similar Denso: 11176-30011 16,30 x 7,30 x 2,00mm
AZ0023-CR39
Rosetta basamento iniettori in rame - Injector base washer in copper
12 x 8 x 1,50mm
BK0052-24
Rosetta basamento iniettori - Injector base washer
Diam: 16mm Thickness: 2,00mm
Similar Denso: 11176-30010
BK0052-25
Rosetta basamento iniettori - Injector base washer
Similar Denso: 11176-26030
BK0052-26
Rosetta basamento iniettori - Injector base washer
Similar Denso: 11176-26020
BK0052-27
Rosetta base iniettori in ALLUMINIO - Injector base washer in ALUMINIUM
Denso-Isuzo 16 x 7,4 x 1,5mm
AZ0155-05 PASTE TO BLOCK INJECTEUR NUT
Peculiar past to use while blocking the injector nut to protect the thread.
TOOLS BOSCH – DELPHI and MORE
INJECTOR BASE WASHERS
47
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
Sirini Code Bosch Codes injector
Codice Sirini Codici Bosch Iniettore
BK0046-C0019 F 00R C00 019BK0046-C0249 F 00R C00 249
BK0046-J0005 F 00R J00 005 0 445 120 002BK0046-J0218 F 00R J00 218 0 445 120 003 – 0 445 120 004BK0046-J0298 F 00R J00 298
BK0046-J0339 F 00R J00 339 0 445 120 007 – 0 445 120 032 – 0 445 120 0320 445 120 079 – 0 445 120 103
BK0046-J0375 F 00R J00 375 0 445 120 006
BK0046-J0399 F 00R J00 399 0 445 120 009 – 0 445 120 010 – 0 445 120 014 0 445 120 015 – 0 445 120 019 – 0 445 120 020 0 445 120 084 – 0 445 120 085
BK0046-J0420 F 00R J00 420 0 445 120 011
BK0046-J0447 F 00R J00 447 0 445 120 012 – 0 445 120 013 – 0 445 120 016 0 445 120 017 – 0 445 120 043 – 0 445 120 077 0 445 120 089
BK0046-J0527 F 00R J00 527
BK0046-J0585 F 00R J00 585
BK0046-J0751 F 00R J00 751
BK0046-J0834 F 00R J00 834 0 445 120 025
BK0046-J0992 F 00R J00 992BK0046-J0995 F 00R J00 995 0 445 120 031BK0046-J1003 F 00R J01 003
BK0046-J1052 F 00R J01 052 0 445 120 028 – 0 445 120 069
BK0046-J1099 F 00R J01 099
BK0046-J1129 F 00R J01 129 0 445 120 029 – 0 445 120 038 – 0 445 120 094
BK0046-J1159 F 00R J01 159 0 445 120 024 – 0 445 120 026 – 0 445 120 027- 0 445 120 044 – 0 445 120 045 – 0 445 120 053
BK0046-J1176 F 00R J01 176 0 445 120 036 – 0 445 120 119
BK0046-J1189 F 00R J01 189BK0046-J1218 F 00R J01 218 0 445 120 030 – 0 445 120 061 – 0 445 120 100
BK0046-J1222 F 00R J01 222 0 445 120 033 – 0 445 120 034 – 0 445 120 051 0 445 120 052 – 0 445 120 096
BK0046-J1278 F 00R J01 278 0 445 120 054 – 0 445 120 057 – 0 445 120 075BK0046-J1326 F 00R J01 326
BK0046-J1329 F 00R J01 329 0 445 120 042BK0046-J1334 F 00R J01 334 0 445 120 047- 0 445 120 091 – 0 445 120 093BK0046-J1428 F 00R J01 428 0 445 120 048 – 0 445 120 049 – 0 445 120 090BK0046-J1451 F 00R J01 451 0 445 120 064 – 0 445 120 065 – 0 445 120 074 - 0 445 120
136 – 0 445 120 137 – 0 445 120 138 - 0 445 120 139BK0046-J1479 F 00R J01 479 0 445 120 066 – 0 445 120 067BK0046-J1508 F 00R J01 508BK0046-J1522 F 00R J01 522 0 445 120 062BK0046-J1533 F 00R J01 533 0 445 120 063BK0046-J1565 F 00R J01 565BK0046-J1657 F 00R J01 657 0 445 120 078 – 0 445 120 124BK0046-J1692 F 00R J01 692 0 445 120 081 – 0 445 120 107 – 0 445 120 129 0 445 120
130 – 0 445 120 149 – 0445 120 150 0 445 120 153 – 0 445 120 163
48
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
BK0046-J1428 F 00R J01 428 0 445 120 048 – 0 445 120 049 – 0 445 120 090BK0046-J1704 F 00R J01 704 0 445 120 083 – 0 445 120 110 – 0 445 120 111 0 445 120
141 – 0 445 120 156 – 0 445 120 164 0 445 120 165BK0046-J1714 F 00R J01 714 0 445 120 071 – 0 445 120 161 – 0 445 120 177 0 445 120
184 – 0 445 120 185 – 0 445 120 187 0 445 120 188 – 0 445 120 193 – 0 445 120 204
BK0046-J1727 F 00R J01 727 0 445 120 086 – 0 445 120 087 – 0 445 120 088 0 445 120 127 – 0 445 120 166
BK0046-J1747 F 00R J01 747 0 445 120 082BK0046-J1819 F 00R J01 819 0 445 120 092 – 0 445 120 157BK0046-J1683 F 00R J01 683 0 445 120 080BK0046-J1865 F 00R J01 865 0 445 120 098 – 0 445 120 099 – 0 445 120 147 - 0 445 120
148BK0046-J1895 F 00R J01 895 0 445 120 012 – 0 445 120 013 – 0 445 120 016 0 445 120
017 – 0 445 120 043 – 0 445 120 077 0 445 120 089
BK0046-J1924 F 00R J01 924 0 445 120 102BK0046-J1941 F 00R J01 941 0 445 120 029 – 0 445 120 037 – 0 445 120 070 0 445 120
097 – 0 445 120 112 – 0 445 120 115 0 445 120 120 – 0 445 120 121 – 0 445 120 122 0 445 120 125 – 0 445 120 133 – 0 445 120 140 0 445 120 144 – 0 445 120 159
BK0046-J1945 F 00R J01 945 0 445 120 046 – 0 445 120 113 – 0 445 120 114BK0046-J2004 F 00R J02 004 0 445 120 071 – 0 445 120 161 – 0 445 120 177 0 445 120
184 – 0 445 120 185BK0046-J2005 F 00R J02 005 0 445 120 008BK0046-J2012 F 00R J02 012 0 445 120 116 – 0 445 120 135 – 0 445 120 168BK0046-J2016 F 00R J02 016BK0046-J2035 F 00R J02 035 0 445 120 117 – 0 445 120 145 – 0 445 120 146 0 445 120
158 – 0 445 120 160 – 0 445 120 192 0 445 120 215BK0046-J2044 F 00R J02 044 0 445 120 118 – 0 445 120 143 – 0 445 120 155BK0046-J2056 F 00R J02 056 0 445 120 106 – 0 445 120 142BK0046-J2067 F 00R J02 067 0 445 120 043 – 0 445 120 077 – 0 445 120 089BK0046-J2073 F 00R J02 073 0 445 120 128 – 0 445 120 131 – 0 445 120 196BK0046-J2079 F 00R J02 079BK0046-J2103 F 00R J02 103 0 445 120 134BK0046-J2122 F 00R J02 122BK0046-J2130 F 00R J02 130 0 445 120 059 – 0 445 120 060 – 0 445 120 123 0 445 120
132 – 0 445 120 151 – 0 445 120 152BK0046-J2213 F 00R J02 213 0 445 120 040 – 0 445 120 041BK0046-J2235 F 00R J02 235 0 445 120 101BK0046-J2246 F 00R J02 246 0 445 120 073BK0046-J2266 F 00R J02 266 0 445 120 126BK0046-J2278 F 00R J02 278 0 445 120 058 – 0 445 120 109BK0046-J2304 F 00R J02 304BK0046-J2377 F 00R J02 377 0 445 120 167BK0046-J2386 F 00R J02 386 0 445 120 072 – 0 445 120 076BK0046-J2397 F 00R J02 397 0 445 120 095
49
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
BK0046-J2410 F 00R J02 410 0 445 120 179 – 0 445 120 180 – 0 445 120 197 0 445 120 201 – 0 445 120 202 – 0 445 120 220 0 445120 229
BK0046-J2429 F 00R J02 429 0 445 120 178BK0046-J2449 F 00R J02 449 0 445 120 162 – 0 445 120 186BK0046-J2453 F 00R J02 453BK0046-J2454 F 00R J02 454 0 445 120 025BK0046-J2466 F 00R J02 466 0 445 120 030 – 0 445 120 061 – 0 445 120 100 0 445 120
217 – 0 445 120 218 – 0 445 120 219BK0046-J2472 F 00R J02 472 0 445 120 182 – 0 445 120 183BK0046-J2492 F 00R J02 492BK0046-J2506 F 00R J02 506 0 445 120 181 – 0 445 120 199BK0046-J2561 F 00R J02 561 0 445 120 203BK0046-C1001 F 00V C01 001 0 445 110 003 – 0 445 110 004 – 0 445 110 005 0 445 110
006 – 0 445 110 009 – 0 445 110 110 0 445 110 011 – 0 445 110 012 – 0 445 110 014 0 445 110 015 – 0 445 110 024 – 0 445 110 025 0 445 110 034 – 0 445 110 035 – 0 445 110 045 0 445 110 046 – 0 445 110 069 – 0 445 110 070 0 445 110 071 – 0 445 110 072 – 0 445 110 073 0 445 110 074 – 0 445 110 093 – 0 445 110 094
BK0046-C1003 F 00V C01 003 0 445 110 008 – 0 445 110 020 – 0 445 110 044 0 445 110 062
BK0046-C1004 F 00V C01 004 0 445 110 028 – 0 445 110 029 – 0 445 110 030BK0046-C1005 F 00V C01 005 0 445 110 020 – 0 445 110 056 – 0 445 110 086 0 445 110
146BK0046-C1006 F 00V C01 006 0 445 110 017 – 0 445 110 018 – 0 445 110 042 0 445 110
043BK0046-C1007 F 00V C01 007 0 445 110 022 – 0 445 110 023BK0046-C1009 F 00V C01 009BK0046-C1010 F 00V C01 010BK0046-C1011 F 00V C01 011 0 445 110 038 – 0 445 110 063
BK0046-C1012 F 00V C01 012 0 445 110 052 – 0 445 110 053 – 0 445 110 060 0 445 110 061
BK0046-C1013 F 00V C01 013 0 445 110 057BK0046-C1014 F 00V C01 014 0 445 110 058BK0046-C1015 F 00V C01 015 0 445 110 059BK0046-C1016 F 00V C01 016 0 445 110 001 – 0 445 110 002BK0046-C1017 F 00V C01 017 0 445 110 065 – 0 445 110 066BK0046-C1018 F 00V C01 018BK0046-C1020 F 00V C01 020 0 445 110 068 – 0 445 110 088BK0046-C1022 F 00V C01 022 0 445 110 084 – 0 445 110 087 – 0 445 110 102 0 445 110
141 – 0 445 110 184 BK0046-C1023 F 00V C01 023 0 445 110 081 – 0 445 110 125 – 0 445 110 231 0 445 110
336 – 0 445 110 337BK0046-C1024 F 00V C01 024 0 445 110 089 – 0 445 110 090 – 0 445 110 097 0 445 110
098 - 0 445 110 115 – 0 445 110 116 BK0046-C1033 F 00V C01 033 0 445 110 091 – 0 445 110 092 – 0 445 110 185 0 445 110
186 – 0 445 110 279 – 0 445 110 283 0 445 110 306BK0046-C1034 F 00V C01 034 0 445 110 109 – 0 445 110 110 – 0 445 110 127 0 445 110
144 – 0 445 110 145 – 0 445 110 160 0 445 110 178
50
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
BK0046-C1035 F 00V C01 035 0 445 110 113 – 0 445 110 114BK0046-C1036 F 00V C01 036 0 445 110 111
BK0046-C1037 F 00V C01 037 0 445 110 112 – 0 445 110 187BK0046-C1038 F 00V C01 038 0 445 110 083BK0046-C1040 F 00V C01 040BK0046-C1042 F 00V C01 042 0 445 110 019BK0046-C1043 F 00V C01 043 0 445 110 047 – 0 445 110 048 – 0 445 110 049 0 445 110
130 – 0 445 110 266BK0046-C1044 F 00V C01 044 0 445 110 064 – 0 445 110 101 – 0 445 110 126 0 445 110
290
BK0046-C1045 F 00V C01 045 0 445 110 095 – 0 445 110 096 – 0 445 110 099 0 445 110 100 – 0 445 110 103 – 0 445 110 104 0 445 110 105 – 0 445 110 106 – 0 445 110 107 0 445 110 108 – 0 445 110 120 – 0 445 110 121 0 445 110 151 – 0 445 110 152 – 0 445 110 170 0 445 110 171
BK0046-C1046 F 00V C01 046 0 445 110 119BK0046-C1050 F 00V C01 050 0 445 110 173 – 0 445 110 221BK0046-C1051 F 00V C01 051 0 445 110 181 – 0 445 110 182 – 0 445 110 189 0 445 110
190 – 0 445 110 199 – 0 445 110 200 0 445 110 201 – 0 445 110 202 – 0 445 110 205 0 445 110 206 – 0 445 110 207 – 0 445 110 208 0 445 110 224 – 0 445 110 225
BK0046-C1052 F 00V C01 052 0 445 110 036BK0046-C1053 F 00V C01 053 0 445 110 076 – 0 445 110 240BK0046-C1054 F 00V C01 054 0 445 110 195 – 0 445 110 196 – 0 445 110 197 0 445 110
198 – 0 445 110 203 – 0 445 110 204BK0046-C1055 F 00V C01 055 0 445 110 222 – 0 445 110 223BK0046-C1057 F 00V C01 057 0 445 110 031BK0046-C1200 F 00V C01 200BK0046-C1300 F 00V C01 300BK0046-C1301 F 00V C01 301 0 445 110 077 – 0 445 110 078 – 0 445 110 349 0 445 110
350BK0046-C1303 F 00V C01 303 0 445 110 075 – 0 445 110 135BK0046-C1304 F 00V C01 304 0 445 110 080
BK0046-C1305 F 00V C01 305 0 445 110 082BK0046-C1306 F 00V C01 306 0 445 110 085 – 0 445 110 142 – 0 445 110 143 0 445 110
153 – 0 445 110 154 – 0 445 110 214 0 445 110 215BK0046-C1307 F 00V C01 307BK0046-C1309 F 00V C01 309 0 445 110 054 – 0 445 110 055 – 0 445 110 123 0 445 110
124 – 0 445 110 128 – 0 445 110 129BK0046-C1310 F 00V C01 310 0 445 110 122 – 0 445 110 131
BK0046-C1311 F 00V C01 311 0 445 110 132 – 0 445 110 133 – 0 445 110 157 0 445 110 158
BK0046-C1312 F 00V C01 312 0 445 110 134 – 0 445 110 229BK0046-C1313 F 00V C01 313 0 445 110 118 – 0 445 110 174 – 0 445 110 175
51
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
BK0046-C1315 F 00V C01 315 0 445 110 136 – 0 445 110 188 – 0 445 110 220 0 445 110 239 – 0 445 110 259 – 0 445 110 271 0 445 110 282 – 0 445 110 285
BK0046-C1317 F 00V C01 317 0 445 110 150 – 0 445 110 228 – 0 445 110 230BK0046-C1318 F 00V C01 318 0 445 110 149 – 0 445 110 164BK0046-C1319 F 00V C01 319BK0046-C1320 F 00V C01 320 0 445 110 159BK0046-C1321 F 00V C01 321 0 445 110 165BK0046-C1322 F 00V C01 322BK0046-C1323 F 00V C01 323 0 445 110 166 – 0 445 110 167BK0046-C1324 F 00V C01 324 0 445 110 162 – 0 445 110 163 – 0 445 110 193 0 445 110
194 – 0 445 110 294 – 0 445 110 295BK0046-C1325 F 00V C01 325 0 445 110 172 – 0 445 110 236 – 0 445 110 296BK0046-C1327 F 00V C01 327
BK0046-C1328 F 00V C01 328 0 445 110 137 – 0 445 110 138 – 0 445 110 139 0 445 110 140 – 0 445 110 155 – 0 445 110 156 0 445 110 176 – 0 445 110 177 – 0 445 110 179 0 445 110 180 – 0 445 110 191 – 0 445 110 192 0 445 110 234 – 0 445 110 235 – 0 445 110 263 0 445 110 264
BK0046-C1329 F 00V C01 329 0 445 110 168 – 0 445 110 169 – 0 445 110 284 0 445 110 315
BK0046-C1330 F 00V C01 330 0 445 110 210 – 0 445 110 211BK0046-C1331 F 00V C01 331 0 445 110 209 – 0 445 110 212 – 0 445 110 216 0 445 110
219 – 0 445 110 301BK0046-C1332 F 00V C01 332 0 445 110 217BK0046-C1333 F 00V C01 333 0 445 110 218 – 0 445 110 286
BK0046-C1334 F 00V C01 334 0 445 110 183 – 0 445 110 260 – 0 445 110 309 0 445 110 310 – 0 445 110 316 – 0 445 110 322 0 445 110 331
BK0046-C1336 F 00V C01 336 0 445 110 213 – 0 445 110 243 – 0 445 110 287 0 445 110 391
BK0046-C1338 F 00V C01 338 0 445 110 247 – 0 445 110 248 – 0 445 110 273BK0046-C1340 F 00V C01 340 0 445 110 227 - 0 445 110 262 BK0046-C1341 F 00V C01 341 0 445 110 237 – 0 445 110 238BK0046-C1342 F 00V C01 342 0 445 110 252BK0046-C1344 F 00V C01 344 0 445 110 244 – 0 445 110 276BK0046-C1345 F 00V C01 345 0 445 110 251BK0046-C1346 F 00V C01 346 0 445 110 253 – 0 445 110 254 – 0 445 110 257 0 445 110
258 – 0 445 110 269 – 0 445 110 270 0 445 110 329 – 0 445 110 339
BK0046-C1347 F 00V C01 347 0 445 110 255 – 0 445 110 256 – 0 445 110 319 0 445 110 320
BK0046-C1348 F 00V C01 348 0 445 110 261BK0046-C1351 F 00V C01 351 0 445 110 267 – 0 445 110 268BK0046-C1352 F 00V C01 352 0 445 110 274 – 0 445 110 275 – 0 445 110 277 0 445 110
278BK0046-C1353 F 00V C01 353 0 445 110 265BK0046-C1354 F 00V C01 354 0 445 110 281 – 0 445 110 297
BK0046-C1355 F 00V C01 355 0 445 110 280 – 0 445 110 328BK0046-C1356 F 00V C01 356 0 445 110 307
52
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GRUPPI VALVOLA – VALVE SET
BK0046-C1357 F 00V C01 357 0 445 110 289BK0046-C1358 F 00V C01 358 0 445 110 291 – 0 445 110 358 – 0 445 110 359 0 445 110
366 – 0 445 110 367 – 0 445 110 386 0 445 110 396BK0046-C1359 F 00V C01 359 0 445 110 293 – 0 445 110 305 – 0 445 110 313 0 445 110
332 – 0 445 110 335 – 0 445 110 343 0 445 110 344 – 0 445 110 345 – 0 445 110 346 0 445 110 347 – 0 445 110 355 – 0 445 110 357 0 445 110 364 – 0 445 110 365 – 0 445 110 379 0 445 110 380 – 0 445 110 392 – 0 445 110 394 0 445 110 395
BK0046-C1360 F 00V C01 360 0 445 110 299 – 0 445 110 300 – 0 445 110 308 0 445 110 327
BK0046-C1361 F 00V C01 361 0 445 110 288
BK0046-C1362 F 00V C01 362 0 445 110 302 – 0 445 110 303BK0046-C1363 F 00V C01 363 0 445 110 304 – 0 445 110 317 - 0 445 110 348 0 445 110
370BK0046-C1364 F 00V C01 364 0 445 110 311BK0046-C1365 F 00V C01 365 0 445 110 312 – 0 445 110 356BK0046-C1366 F 00V C01 366 0 445 110 298BK0046-C1367 F 00V C01 367 0 445 110 318 – 0 445 110 361 – 0 445 110 384 0 445 110
385BK0046-C1368 F 00V C01 368 0 445 110 321 – 0 445 110 389 – 0 445 110 390BK0046-C1369 F 00V C01 369 0 445 110 325 – 0 445 110 326
BK0046-C1370 F 00V C01 370 0 445 110 323 – 0 445 110 324BK0046-C1371 F 00V C01 371 0 445 110 333 – 0 445 110 334 – 0 445 110 360 0 445 110
372 – 0 445 110 383BK0046-C1372 F 00V C01 372 0 445 110 339 – 0 445 110 340BK0046-C1373 F 00V C01 373 0 445 110 341 – 0 445 110 393BK0046-C1374 F 00V C01 374 0 445 110 342
BK0046-C1375 F 00V C01 375BK0046-C1376 F 00V C01 376 0 445 110 338BK0046-C1377 F 00V C01 377 0 445 110 362 – 0 445 110 363BK0046-C1378 F 00V C01 378 0 445 110 377 – 0 445 110 378BK0046-C1379 F 00V C01 379 0 445 110 354BK0046-C1380 F 00V C01 380 0 445 110 375BK0046-C1381 F 00V C01 381 0 445 110 373 – 0 445 110 374
BK0046-C1382 F 00V C01 382 0 445 110 371
BK0046-C1383 F 00V C01 383 0 445 110 376
BK0046-C1384 F 00V C01 384 0 445 110 381
BK0046-C1385 F 00V C01 385 0 445 110 352 – 0 445 110 353
BK0046-C1386 F 00V C01 386 0 445 110 387 – 0 445 110 388
ATTENTION: our valve-set are checked one by one with the most
advanced technologies.
53
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TO FIX INJECTORS ON THE TEST BENCH
AAZ034-09 QUICK CONNECTION diam. 7mm - Universal
AAZ034-09A QUICK CONNECTION diam. 9mm - Universal
AZ0815-00 QUICK CONNECTION 7MM WITH «L» SHAPE 1/8
FEMALE
AZ0815-CR9 QUICK CONNECTION 9MM WITH «L» SHAPE 1/8
FEMALE
AZ0815-01 QUICK CONNECTION 7MM WITH «L» SHAPE 1/8
MALE
AAZ034-09L QUICK CONNECTION 7MM WITH «L» SHAPE FOR
COMMON RAIL INJECTORS
AAZ034-09S QUICK CONNECTION 7MM WITH «L» SHAPE FOR
COMMON RAIL INJECTORS VDO
TOOLS BOSCH – DELPHI and MORE
54
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AZ0150-815F QUICK CONNECTION ISO 1/8 FEMALE X
BOSCH EPS 815
AZ0150-815M QUICK CONNECTION ISO 1/8 MALE X
BOSCH EPS 815
AZ0150-06 QUICK CONNECTION ISO «L» SHAPED
1/8 MALE X 1/8 FEMALE
TOOLS BOSCH – DELPHI and MORE
TO FIX INJECTORS ON THE TEST BENCH
55
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
GLASS KIT FOR COMMON RAIL SIMULATORS
AAZ038-BIC7AAZ038-BIC9
AAZ038-AD7AAZ038-AD9
AAZ038-21AAZ038-BASE
AAZ038-17
AAZ038-19
TOOLS BOSCH – DELPHI and MORE
TO FIX INJECTORS ON THE TEST BENCH
Our glasses permit to visualize the spray of common rail injectors and can be mounted on every kind of test
bench and simulator. They must be fixed directly on the injectors.
Orders codes:
AAZ038-BASE Kit BASE to assemble nr. 1 glass on nr. 1 injector
AAZ038-BASE-KIT Kit BASE complete to fix nr. 4 glasses on nr. 4 injectors
AAZ038-EX Kit exclusive COMPLETE to fix on test bench nr. 1 injector. The kit
is composed of nr. 2 glass in plexiglass with glass-bush with nr. 2
adaptors for pulverizer 7 and 9mm (AAZ038-AD7 – AAZ038-AD9)
AAZ038-BIC7 nr. 1 glass in plexiglas with glass-bush with nr. 1 adaptor x pulverizer of
7mm (AAZ038-AD7)
AAZ038-BIC9 nr. 1 glass in plexiglas with glass-bush with nr. 1 adaptor x pulverizer of
9mm (AAZ038-AD9)
AAZ038-AD7 adaptor x glass for pulverizer of 7mm
AAZ038-AD9 adaptor x glass for pulverizer of 9 mm
AAZ038-17 inner reduction in pvc of 17 for AAZ038-BIC7 – AAZ038-BIC9
AAZ038-19 inner reduction in pvc of 19 for AAZ038-BIC7 – AAZ038-BIC9
AAZ038-21 inner reduction in pvc of 21 for AAZ038-BIC7 – AAZ038-BIC9
56
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
TOOLS BOSCH – DELPHI and MORE
GLASS KIT FOR COMMON RAIL SIMULATORS
AAZ038-EX
NR. 1 glass in plexiglas with glass-bush with nr. 1 adaptor for pulverizer of
7mm (AAZ038-BIC7)
NR. 1 glass in plexiglas with glass-bush with nr. 1 adaptor for pulverizer of
9mm (AAZ038-BIC9)
NR. 3 inner reductions of 17, 19 and 21
(AAZ038-17 – AAZ038-19 – AAZ038-21)
AAZ038-BASE-KIT
Kit to fix nr. 4 glasses for CR injectors
Nr. 4 plexiglas glasses with glass-bushes with its adaptors and reductions
AAZ034-SUP
Stand kit to fix on test bench common rail injectors. (without plexiglass
glasses).
AAZ034-EX
Stand kit to fix on test bench common rail injectors complete with 4
plexiglas glasses with glass-bushes.
TO FIX INJECTORS ON THE TEST BENCH
57
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AAZ708-CR FIXING-PLATE KIT FOR INJECTORS ON TEST BENCH BOSCH EPS708 – CRI -
Kit of 4 fixing-plate to assemble easily the injectors CRI on test bench EPS708
Nr. 1 fixing-plate diam. 17mm
Nr. 1 fixing-plate diam. 19mm
Nr. 1 fixing-plate diam. 20mm
Nr. 1 fixing-plate diam. 21mm
All the fixing-plates are sold also individually
TO FIX INJECTORS ON TEST BENCH EPS708
AAZ708-CR17 FIXING-PLATE X INJECTOR DIAM. 17mm
Nr. 1 piece
AAZ708-CR19 FIXING-PLATE X INJECTOR DIAM. 19mm
Nr. 1 piece
AAZ708-CR20 FIXING-PLATE X INJECTOR DIAM. 20mm
Nr. 1 piece
AAZ708-CR21 FIXING-PLATE X INJECTOR DIAM. 21mm
Nr. 1 piece
TOOLS BOSCH – DELPHI and MORE
58
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
AAZ708-CR30 FIXING-PLATE X INJECTOR FOR TEST BENCH
BOSCH EPS 708 – CRIN -
Fixing-plate to assemble easily the injectors CRI on test bench EPS708
Nr. 1 fixing-plate diam. 30mm
EXAMPLE OF ASSEMBLY OF COMMON RAIL INJECTORS ON EPS 708 WITH
SYSTEM BOSCH AND SYSTEM SIRINI
TOOLS BOSCH – DELPHI and MORE
TO FIX INJECTORS ON TEST BENCH EPS708
59
All rights reserved to: SIRINI Srl – Via Lombardia 17 - 20010 Arluno – Milano – Italy
Tel. +39 02 90376944 – Fax: 02 903 76514 e.mail: info@sirini.it - Sirini is an Original Trade Mark
PIPE IN RILSAN
TOOLS BOSCH – DELPHI and MORE
AAT099-CR2 DOUBLE RILSAN PIPE
To connect common rail injector at the test bench
Pipe composed of nr. 2 pipes, one red and one black
Lenght:1,30 mt
AAT099-CR RILSAN PIPE
To connect common rail injector at the test bench
Lenght: 2 mt
AAT099-CR8 MULTI-RILSAN PIPE
To connect common rail injector at the test bench
Pipe composed of nr. 8 pipes of differents colors
Lenght: 1,50 mt
AAT4004-23 SPECIAL PIPE TYGOON
Internal diam: 3,2mm External diam: 6,0mm
Sold in meters
AAT4006-23 SPECIAL PIPE TYGOON
Internal diam: 4,8mm External diam: 8,0mm
Sold in meters
AAT4008-23 SPECIAL PIPE TYGOON
Internal diam: 8,00mm External diam: 10,0mm
Sold in meters
top related