thermal insulation solutions_a

April 12, 2023

Presentation on Thermal Insulation

PRS Solutions Private Limited. All rights reserved. April 12, 2023

April 12, 2023 2 PRS Solutions Private Limited. All rights reserved.

Sequence of Presentation

• Introduction of the company• Our thermal insulation range• PRSS – your right partner

2

April 12, 2023 3 PRS Permacel Private Limited. All rights reserved.

PRS Solutions Private Limited• Started business in the early

sixties as the `PERMACEL’ division of Johnson & Johnson.

• JNJ divested Permacel to PRS group in August 1999.

• PRSS started as an export arm for PRSP

• Largest, State of Art manufacturing facility in the industry in India.

April 12, 2023 4 PRS Solutions Private Limited. All rights reserved.

Our Manufacturing Facility

Our range of thermal insulation products

• Products– P-501 & P-501K– P-504T – P-538 / P-539HT : Gentherm &

Gentherm HT– P-520-20

Locogard

• A special fibre mat covered from top using special coated fabric & from other sides using high temperature resistant fabric.

• The assembly is duly stitched using high temperature resistant thread.

• Requisite fasteners are attached for ease of fixing.

• It is offered in kit form as per the drawings.

Salient Features

• Avg. Thickness (mm) 20 - 30

• Limiting oxygen index LOI > 50% as tested in accordance with IS:13501

• Flame Resistant: Passes Class ‘A’ as per Appendix 8 of UIC-564-2 OR

• Visibility Deterioration: Passes Class ‘A’ as per Appendix 15 of UIC-564-2 OR

• Toxicity < 0.2 Units as per NCD: 1409

• Insulation Property = 120 deg c Maximum*

* Temperature of cold face, when hot face temperature is 600 Degree C.

P-501K Locogard on Diesel Engine

Locogard

P504T- Salient Features

• A special fibre mat covered from all sides with an aluminised glass fabric and the duly sealed with an aluminised glass cloth tape.– Avg. Thickness (mm) 25 + 5– Insulation Property* ( O C) 70

Maximum* Temperature of cold face, when hot face temperature is 450

Degree C using one layer.

– Fire resistance Passes UL-94 test at V-0 level.

Gengard on Tube Mould

Tube Mould - Fully insulated

P504T

P-504T for plastic industry

April 12, 2023 12 PRS Solutions Private Limited. All rights reserved

P-504T for plastic industry

April 12, 2023 13 PRS Solutions Private Limited. All rights reserved

P-504T for pipe insulation

April 12, 2023 14 PRS Solutions Private Limited. All rights reserved.

P-504T for pipe insulation

April 12, 2023 15 PRS Solutions Private Limited. All rights reserved.

P-504T for turbine insulation

April 12, 2023 16 PRS Solutions Private Limited. All rights reserved.

P-538 HT- salient features

Gentherm Series P 538 A / P539

• A special fibre mat covered from bottom with high strength high temperature enduring fabric & from top with super soft low emissive aluminised reinforced high temperature enduring fabric.

– Avg. Thickness (mm) 50 + 5

– Insulation Property* ( OC) 60 Maximum

* Temperature of cold face, when hot face temperature is 450 Degree C

using one layer.

– Suitable for -30 to +530 OC Temperature Continuous

– Fire resistance Passes UL-94 test at V-0 level.

Insulation on DG Sets P-538 HT & P-504T

Insulation on DG Sets : 2000KVA P-539

Turbine Insulation - P539

12 April 2023 PRS Permacel Private Limited. All rights reserved. 20

P-520-20 salient features

Supertherm P 520-20

• A special insulation mat duly enveloped with high strength high temperature enduring fabric.

– Suitable for -30 to +650 OC Temperature

Continuous

– Fire resistance Passes UL-94 test at V-0 level

– Insulation effectiveness : surface temperature

expected at NMT(Not more than) 100°C with hot

objects at NMT 800°C at a distance of NLT(not

less than) 15”

April 12, 2023 21 PRS Solutions Private Limited. All rights reserved.

P-520-20 in a steel plant

April 12, 2023 22 PRS Solutions Private Limited. All rights reserved.

PRS Solutions – right partner• Oldest , trusted ,ethical and most

experienced company in this industry in India• Ability to provide END to END solutions • New state of the art manufacturing facility

with all the necessary approvals• Preferred thermal insulation material vendors

to DG set manufacturers, Tyre industry, Plastic industry, power plant’s(Nuclear also) in India

• DSIR approved R&D lab – only one in India• Excellent track record of innovations – with

over 25 patents• Privately held with the backing of a 150 year

business group backing

April 12, 2023 24 PRS Solutions Private Limited. All rights reserved.

Thank You