thermal insulation technology

Lightweight thermal insulating mortar 21 April 2010

THERMAL

INSULATION

TECHNOLOGY


Politerm: a successful transfer of theory to practical

Superlight inert made of EPS vergin beads preadditivated with EIA (Edilteco Insulating Additive)

Suitable for the preparation of lightweight – thermal insulating mortars

To be mixed with cement and water,NO SAND REQUIRED Preadditivated at the factory =constancy of use and final results


Perfect mixing with the water binder Homogeneous distribution within the mixture Light: just as low as from 200 kg/m3! High thermal insulation: λ = 0,067 W/Mk Perfect pumping capacities Prevention of the polystyrene beads from

floating.

Politerm: a successful transfer of theory to practical

POLITERM INTERMEDIATE LAYERAND PIANO ZERO (230)

POLITERM ROOFINGAND FCA (215)

TECHNICALDATA SHEET

MANUALOF USE


Politerm applications

Thermal insulation on roofs

Thermal insulation in attics

Thermal insulation and lightening on floors

single-layer

Thermal insulation and lightening and levelling on floors

intermediate layer

under screed

Thermal insulation for basements

-single-layer -

intermediate layer under screed



Thermal insulation,

lightening and gradient

formation on terraces

single-layer



Thermal insulation,

lightening and gradient

formation on terraces

Intermediate layer under

screed



Thermal insulation, lightening and

gradient formation on flat roofs

under waterproofing layer



Thermal insulation, lightening and

levelling intermediate layer under floor heating system


Politerm applications Thermal insulation, lightening

and levelling

on vaulted floors


Politerm: preparation

+

+

POLITERM

CEMENT

CLEANWATER

POLITERMTHE LIGHTWEIGHT THERMAL INSULATING MORTARNO SAND IN THE MIXTURE


Cement mixer (*)

(*): 200 litres packaging recommended

Truck mixer (**)

Politerm: preparation

(**): 500 litres packaging recommended


Politerm equipment POLITERM MACHINEPOLITERM MACHINE

Suitable for mixing and pumping of lightweight mortars

Capacity: 10-12 m3 /h of mortar Tank: 1000 lt Pumping distance: 120 m

horizontally and >30 m vertically Electrical power 7,5 kW – 380 V Weight: 800 kg

Other versions:- With automatic dosage of water- Diesel engine

HIGH PRODUCTIVITY !HIGH PRODUCTIVITY ! TECHNICALDATA SHEET


Politerm equipmentISOLCAP MACHINEISOLCAP MACHINE

Suitable for lightweight mortars and selflevelling mortars

Capacity: 3 m3 /hour of mortar Tank: 260 lt Pumping distance: 50 m

horizontally and 25 m vertically Electrical power 6 kW – 380 V Weight: 128 kg

VERSATILE AND PORTABLE !VERSATILE AND PORTABLE ! TECHNICALDATA SHEET


Politerm equipmentPOLITERM PUMPPOLITERM PUMP

Suitable for pumping of premix lightweight mortars

Capacity: 500 litre/minute Tank: 200 lt Pumping distance: 120 m horizontally

and 60 m vertically Electrical power: 7,5 kW – 380-220 V Weight: 300-350 kg

POWERFUL AND RELIABLE !POWERFUL AND RELIABLE !TECHNICALDATA SHEET


Politerm equipmentPOLITERM BLOW READY MIXPOLITERM BLOW READY MIX

Suitable for blowing of Politerm into the truck mixer

Capacity: 750 litre/minute Tank: 760 lt Pumping at 4 m high Electrical power: 0,75 kW – 380 V Weight: 300 kg

PRACTICAL AND QUICK !PRACTICAL AND QUICK !


Politerm based Readymix products

VERTICAL WALLSAND CEILING

HORIZONTAL INSULATIONAND LIGHTENING


Readymix: vertical walls and ceilingsISOLTECOISOLTECO Lightweight and Highly thermal insulating

plaster Composition: EPS virgin beads and

special additives λ = 0,058 W/m°K Density: 150 kg /m3

Compressive resistance: 1,07 N/mm2

μ = 12,67 Sound insultaion: 7dB at 6 cm thickness Application: with plastering machine

TECHNICALDATA SHEET

MANUALOF USE


4. Thermal insulation in-between walls5. Internal thermal insulation

1. Thermal insulation on ceiling2. External thermal insulation3. Elimination of thermal bridges

ISOLTECOISOLTECOSUITABLE FOR THE INSULATION OF:

1.CEILING2.EXTERNAL WALLS3.ELIMINATION OF THERMAL BRIDGES4.IN-BETWEEN WALLS*5.INTERNAL WALLS

*ISOLTECO WALL (0,42 N/mm2)

Readymix: vertical walls and ceilings


ISOLSANISOLSAN Dehumidifying plaster, lightweight and

with high thermal insulating properties Composition: EPS virgin beads and

special additives λ = 0,068 W/m°K Density: 230 kg /m3

Compressive resistance: 1,28N/mm2

μ = 9,0 Bag: 60 lt yeld Application: with plastering machine


TECHNICALDATA SHEET

MANUALOF USE(Isolteco)


1. Thermal insulation on ceiling2. External thermal insulation3. Elimination of thermal bridges

5. Internal thermal insulation

ISOLSANISOLSANSUITABLE FOR THE INSULATION OF:

1.CEILING2.EXTERNAL WALLS3.ELIMINATION OF THERMAL BRIDGES5. INTERNAL WALLS



Isolteco (Isolsan): preparation

+

ISOLTECO(ISOLSAN)

CLEANWATER

THERMAL INSULATING PLASTER

ISOLTECO (44 e 440)


Isolteco (Isolsan): preparation

CEMENT MIXER

MIXING(Manual application)

MIXING AND PUMPING(mechanical application)

PLASTERING MACHINE

HELICOIDALFULL BLADE

30 LTROTOR-

STATOR


Readymix: horizontal insulation and lightening


Thermal insulation on roofLightweight single layer screed with slope creation

Lightweight single layer screed for terraces and balcony

Lightweight, thermal insulating underfloor layer

Lightweight thermal insulating layer on wood slab

Lightweight thermal insulating layer under heating floors

Lightweight thermal insulating single layer for cercamic screed

Levelling and lightweight filling for thermal insulation of vaults ceilings



ISOLCAP ISOLCAPFEIN

ISOLCAPSPEED

ISOLCAPXX

ISOLCAPMAX

Feature

Underscreed layer

Single layer screed Fast drying Reinforced with polypropilene fibres for improved mechanical resistance

High compression resistance

Density 250 kg/m3 300 kg/m3 400 kg/m3 500 kg/m3 800 kg/m3

Thermal conductivity

0,067 W/m°K 0,087 W/m°K 0,095 W/m°K 0,104 W/m°K 0,176 W/m°K

Compressive strenght

0,83 N/mm2 1,61 N/mm2 1,48 N/mm2 2,24 N/mm2 4 N/mm2

μ 11,5 12 21,04 21,04 -

NOTE: directapplication of

ceramic tile= 96 hwooden floor=7 days

ceramic tile= 24 hwooden floor=48 h





POLITERM: SUMMARY OF MAIN ADVANTAGES

Using a higher performance material means obtain savings in terms of: Material consumption Weight Space (reduced thickness) Time

Furthermore, due to its lightness, it contributes to considerably reduce the earthquake effect at the buildings


We warmly Thank You

for your attention

Grazie

THERMAL

INSULATION

TECHNOLOGIES

thermal insulation technology

Documents