tems panic handles - prlglass.com configurations_lo res.pdf · prl glass systems inc. phone:...

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

PL100A PL101A PL102A

PRL GLASS SYSTEMSPANIC HANDLES

FOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS

PRL GLASS SYSTEMS

2

PANIC HANDLECONFIGURATIONS

PRL Glass systems inc.251 Mason way

City of industry, CA. 91746Phone: 800-433-7044

Fax: 626-968-9256www.prlglass.com

Leading the Industry in Proven Custom Archi-tectural Glass and Metal Door Hardware.

PRL is now offering 2 NEW completely revo-lutionary, adaptable glass door panic systems.

PL 100 PL 110. Glass Door Panic System

Both Series of Panic Door Systems accentuate glass entrance doors with its contemporary, minimal 1-1/4” tubular housing to accom-modate over 100 precision and manufactured fitting components engineered and mechani-cally synchronized for a safe panic function.Many door style configurations that include narrow full frame entrances and custom ap-plications are available, choose from a wide range of contemporary exterior pulls and adaptable handles, custom TVS header, an electric strike can also be utilized with this glass panic door system and work in conjunc-tion with a remote key less application, please consult PRL for details.

PANIC HANDLESFOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS

The PL 100 panic door device can also be dogged by sliding a pin located below the cylinder hous-ing which allows the panic system to remain in an open position giv-ing free access during business hours. An electric strike can also be utilized with this glass panic door system and work in conjunction with a remote key less application.

Note: PRL manufactures two types of glass door panic systems; PL 100 for top latch and PL 110 for floor latch-ing panic device applications. State and Local building codes may require top latch for A.D.A. compliance.

•Thresholds are recommended on floor strike system as floor mounted strikes can be a tripping hazard.

PL110 is a contemporary panic door handle design primarily for glass door entrance systems - panics can be manufactured to be installed on wood and aluminum doors as well, please consult factory for specifica-tions. The slim 1 1/4” diameter interior panic bar system conceals the latching mechanism allowing minimal unin-terrupted view on 1/2” or 3/4” glass.

The PL 110 panic door device can also be dogged by sliding a pin located below the cylinder housing which al-lows the panic system to remain in an open position giving free access during business hours. An electric strike can also be utilized with this glass panic door system and work in conjunction with a remote key less application.

Note: State and Local building codes may require top latch for A.D.A. com-pliance. Please see PRL Glass Door Panic System PL 100 Series for all your top latching panic device applications.

•Thresholds are recommended on floor strike system as floor mount-ed strikes can be a tripping hazard.

3

PRL GLASS SYSTEMSPANIC HANDLECONFIGURATIONS

PRL Glass systems inc.251 Mason way

City of industry, CA. 91746Phone: 800-433-7044

Fax: 626-968-9256www.prlglass.com

PANIC HANDLESFOR TEMPERED GLASS, FULL FRAME AND WOOD DOORS

Handle A Handle B Handle C Handle D Handle E Handle F Handle G Handle H

Handle J Handle J-S Handle K Handle K-S Handle L Handle L-S Handle M Handle M-S

PRL GLASS SYSTEMS

4

CONFIGURATIONS

PRL Glass systems inc.251 Mason way

City of industry, CA. 91746Phone: 800-433-7044

Fax: 626-968-9256www.prlglass.com

ARCHITECTURAL HANDLE

Handle N Handle P Handle X Handle Y

Keyed access device

Push indicator“A” style exterior pull

PLDBL100A

PLDB100A

5

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

USPL100A PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.

PLDB100A DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100A see illustration

PLDH100A DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.

PLEZ100A ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.

4-1/8

Keyed access device

Push indicator“A” style exterior pull

PRL GLASS SYSTEMS

6

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

US

Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle

Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:

•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware

•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation

The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use

SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )

Stainless steel tubing with 0.083” wall thickness ( 2 mm )

1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )

Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated

Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*

*Consult factory for fabrication

Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted

Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”

PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing

Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”

Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL

1.3 million tested by Architectural testing

PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths

Electric strike

Manual strike

Cylinder housing

PL100Apanichandle

PLDH100Adummyhandle

PL100Apanichandle

Blind fastener

PLDB100AdeadbolthandleWith keyedcylinders

10-1/2”

Retainer plate

PLEZ100Aelectronicegresshandle

36” to 42” refer to

Local code

Keyed access device

Push indicator“A” style exterior pull

7

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

US

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

US

Keyed access device

Push indicator“D” style exterior pull

PLDBL100D

PLDB100D

PRL GLASS SYSTEMS

8

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

USPL100D PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.

PLDB100D DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systems.

PLDH100D DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.

PLEZ100D ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.

4-1/8

Keyed access device

Push indicator“D” style exterior pull

9

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

US

Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle

Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:

•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware

•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation

The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use

SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )

Stainless steel tubing with 0.083” wall thickness ( 2 mm )

1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )

Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated

Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*

*Consult factory for fabrication

Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted

Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”

PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing

Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”

Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL

1.3 million tested by Architectural testing

PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths

Electric strike

Manual strike

Cylinder housing

PL100Dpanichandle

PLDH100Ddummyhandle

PL100Dpanichandle

PLDB100DdeadbolthandleWith keyedcylinders

10-1/2”

Retainer plate

PLEZ100Delectronicegresshandle

36” to 42” refer to

Local code

Keyed access device

Push indicator“D” style exterior pull

PRL GLASS SYSTEMS

10

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

US

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

US

Keyed access device

Push indicator

PLDBL100F

PLDB100F

“F” style exterior pull

11

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

USPL100F PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.

PLDB100F DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100F see illustration

PLDH100F DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.

PLEZ100F ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.

4-1/8

Push indicator

“F” style exterior pull

PRL GLASS SYSTEMS

12

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

US

Exception Maximum height for 1/2” glass doors is 108” tall when using “F” style exterior handle

Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:

•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware

•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation

The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use

SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )

Stainless steel tubing with 0.083” wall thickness ( 2 mm )

1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )

Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated

Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*

*Consult factory for fabrication

Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted

Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”

PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing

Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”

Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL

1.3 million tested by Architectural testing

PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths

Electric strike

Manual strike

Cylinder housing

PL100Fpanichandle

PLDH100Fdummyhandle

PL100Fpanichandle

Blind fastener

PLDB100FdeadbolthandleWith keyedcylinders

10-1/2”

PLEZ100Felectronicegresshandle

36” to 42” refer to

Local code

Keyed access device

Push indicator

“F” style exterior pull

13

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

US

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

US

Keyed access device

Push indicator

“J” style exterior pull

PLDBL100J

PLDB100J

PRL GLASS SYSTEMS

14

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

USPL100J PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.

PLDB100J DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100J see illustration

PLDH100A DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.

PLEZ100J ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.

4-1/8

Push indicator

“J” style exterior pull

SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )

Stainless steel tubing with 0.083” wall thickness ( 2 mm )

1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )

Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated

Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*

*Consult factory for fabrication

Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted

Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”

PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing

Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”

Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL

1.3 million tested by Architectural testing

PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths

15

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

US

Exception Maximum height for 1/2’ glass doors is 108” tall when using “F” style exterior handle

Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:

•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware

•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation

The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use

Electric strike

Manual strike

Cylinder housing

PL100Jpanichandle

PLDH100Jdummyhandle

PL100Jpanichandle

Standoff

PLDB100JdeadbolthandleWith keyedcylinders

10-1/2”

Retainer plate

PLEZ100Jelectronicegresshandle

36” to 42” refer to

Local code

10-1/2”

36” to 42” refer to

Local code

Push indicator

“J” style exterior pull

PRL GLASS SYSTEMS

16

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

US

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

US

Keyed access device

Push indicator

“JS” style exterior pull

PLDBL100JS

PLDB100JS

17

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

USPL100JS PANIC EXIT DEVICEThe operating system mechanism concealed within the vertical tubing retracts the latch bolt when the interior actuation bar is pushed.Optionally, an exterior keyed access device can be installed to allow entry. A dogging feature defeats locking action during business hours. Electronic strikes are available for use with our Panic Handles, providing many secured entry options.

PLDB100JS DEADBOLT LOCKThe Deadbolt handle is offered with keyed cylinders on both the interior and exterior sides of the door, or with a thumb turn on the interior. An optional top latch bolt will permit the use of electronic strikes for controlled entry systemspart # example = PLDBL100J see illustration

PLDH100JS DUMMY HANDLEThese fixed handles are designed to match the appearance of Panic, Deadbolt, and Electronic Egress Handles, and are made from the same high quality materials.

PLEZ100JS ELECTRONIC EGRESSThe touch bar is an electronic exit device that does not require any special tools or knowledge to activate the lock. The simple act of touching the bar/handle (even through gloves or clothing) activates an electronic sensor which immediately releases the lock. No pressure is required for this use which provides superior egress safety for frail or disabled persons.

4-1/8

Push indicator

“JS” style exterior pull

SPECIFICATIONMaterial: 1-1/4” diameter ( 32mm )

Stainless steel tubing with 0.083” wall thickness ( 2 mm )

1-1/4” diameter ( 32mm )260 Brass tubingwith 0.083” wall thickness ( 2 mm )

Glass Thickness: 1/2” ( 12mm ), 3/4” ( 19mm ) and upmonolithic or laminated

Aluminum Door: 1-3/4” up to 2-1/4” thick*Wood Doors: 1-3/4” up to 4” thick*

*Consult factory for fabrication

Finishes: #4 Brushed s.s. / US32D#8 Polished s.s. / US32Satin Brass / US4Polished Brass/US3US10B per specificationCustom Painted

Door heights: Exterior application1/2” Glass thickness PL100A 8’-0”3/4” Glass thickness PL100A 9’-0”1/2” Glass thickness PL100D 8’-6”

PL100F10: 3/4” Glass thicknesswith full top and bottom railsMax. Height = 10’-0”Tested by architectural testing

Interior application1/2” Glass thickness PL100A 8’-6”3/4” Glass thickness PL100A 9’-0”

Certification: ANSI/BHMA A156.3 - 2008 Grade 1Cycle: 500,000 Max Approved By UL

1.3 million tested by Architectural testing

PL-100 Panics device and PLDB deadboltsare all furnished with removable coreCustom collars are available to accommodate cylinders with different lengths

PRL GLASS SYSTEMS

18

Architectural Hardware

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

US

Exception Maximum height for 1/2’ glass doors is 108” tall when using “F” style exterior handle

Increased sizes make the door assemblies heavier and more flexible.Therefore, the following guidelines should be considered:

•Wind load, stack action and ventilation loads•Mounting conditions of doors to building structure•Panic devices, Deadbolt locks or other hardware

•Overhead closer or floor closer characteristics•Heavy usage and frequency of operation•Comfortable feel and ease of door operation

The architect’s structural engineer should be consulted to assure that the door design is correct to the intended use

Electric strike

Manual strike

Cylinder housing

PL100JSpanichandle

PLDH100JSdummyhandle

PL100JSpanichandle

Standoff

PLDB100JSdeadbolthandleWith keyedcylinders

Retainer plate

PLEZ100JSelectronicegresshandle

10-1/2”

36” to 42” refer to

Local code

10-1/2”

36” to 42” refer to

Local code

Push indicator

“JS” style exterior pull

19

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

Architectural Hardware

US

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

US

PRL GLASS SYSTEMS

20

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100A

21

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100B

8

PRL GLASS SYSTEMS

22

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100C

23

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100D

PRL GLASS SYSTEMS

24

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

10 1/2

8

PL100E

25

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100F

36-42

10 1/2

10

PRL GLASS SYSTEMS

26

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100FADA The PL100FADA panic handle is designed to meet ADA compliance. The exterior handle measures 10” from bottom of door to bottom of exterior handle.

27

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100F10 The PL100F10 is a heavy duty panic handle designed for over sized doors up to 120” tall by using 3/4” tempered glass and a full height “F” exterior handle UL Approved and tested by Architectural testing

36-42

10 1/2

PRL GLASS SYSTEMS

28

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL100G

8

29

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100H

36-42

10 1/2

8

PRL GLASS SYSTEMS

30

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100J

36-42

10 1/2

31

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100JS

36-42

10 1/2

PRL GLASS SYSTEMS

32

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100M

36-42

10 1/2

8

33

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100MS

36-42

10 1/2

8

PRL GLASS SYSTEMS

34

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100X

36-42

10 1/2

8

35

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100Z

36-42

10 1/2

PRL GLASS SYSTEMS

36

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100A

37

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100B

PRL GLASS SYSTEMS

38

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100C

39

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100D

PRL GLASS SYSTEMS

40

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100E

41

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100F

PRL GLASS SYSTEMS

42

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100FADA

43

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100F10 The PL100F10 is a heavy duty panic handle designed for over sized doors up to 120” tall by using 3/4” tempered glass and a full height “F” exterior handle UL Approved and tested by Architectural testing

PRL GLASS SYSTEMS

44

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100G

45

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100H

PRL GLASS SYSTEMS

46

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100J

47

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100JS

PRL GLASS SYSTEMS

48

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100M

49

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100MS

PRL GLASS SYSTEMS

50

PL100 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100X

51

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL100 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL100Z

PRL GLASS SYSTEMS

52

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Panic HandlesFor Tempered Glass Doors

53

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110A

PRL GLASS SYSTEMS

54

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

10 1/2

PL110B

55

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110C

PRL GLASS SYSTEMS

56

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

10 1/2

PL110D

57

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110E

PRL GLASS SYSTEMS

58

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110F

59

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

10 1/2

PL110G

PRL GLASS SYSTEMS

60

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

10 1/2

PL110H

61

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

10 1/2

PL110J

PRL GLASS SYSTEMS

62

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

10 1/2

PL110JS

63

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110K

PRL GLASS SYSTEMS

64

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110KS

65

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110L

PRL GLASS SYSTEMS

66

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110LS

67

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

10 1/2

PL110M

PRL GLASS SYSTEMS

68

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

10 1/2

PL110MS

69

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110N

PRL GLASS SYSTEMS

70

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110P

71

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

18 1/2

10 1/2

PL110X

PRL GLASS SYSTEMS

72

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

8

PL110Y

73

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

36-42

10 1/2

PL110Z

PRL GLASS SYSTEMS

74

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110A

75

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110B

PRL GLASS SYSTEMS

76

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110C

77

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110D

PRL GLASS SYSTEMS

78

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110E

79

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110F

PRL GLASS SYSTEMS

80

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110G

81

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110H

PRL GLASS SYSTEMS

82

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110J

83

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110JS

PRL GLASS SYSTEMS

84

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110K

85

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110KS

PRL GLASS SYSTEMS

86

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110L

87

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110LS

PRL GLASS SYSTEMS

88

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110M

89

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110MS

PRL GLASS SYSTEMS

90

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110N

91

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110P

PRL GLASS SYSTEMS

92

PL110 PANIC HANDLECONFIGURATIONS

Architectural handlesPRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.com

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110X

93

PRL GLASS SYSTEMS

PRL Glass systems inc. Phone: 800-433-7044 Fax: 626-968-9256 www.prlglass.comArchitectural handles

PL110 PANIC HANDLECONFIGURATIONS

Finish

#4 brushed stainless steel

#8 polished stainless steel

Satin brass

Polished brass

us10b

Custom painted

The following list of mortise cylinders will work with PRL Panics and Deadbolts

Schlage RusswinCorbinSargent

YaleBest

Lori

20-001#0 1/2”5253411E641152218

MFR. NO. NOMINAL LENGTH

CAM NO.

1-1/8”

1-1/8”1-1/8”

1-1/8”

1-1/8”1-1/8”1-1/8”

B502-191#1#1X130001EC41161 (std.)4400-00-3002

Removable core mortise cylinders and thumb-turns will function properly when fitted with one of the listed straight cams. Custom cylinder collars are available to accommodate cylinder lengths exceeding 1-1/8”

PL110Y