team: fibrex waterproofing coating. introduction the astm standard defines it is a treatment of a...
Post on 31-Dec-2015
214 Views
Preview:
TRANSCRIPT
TEAM: FIBREX
Waterproofing Coating
Introduction The ASTM Standard defines it is a
treatment of a surface to prevent the passage of water under hydrostatic pressure.
Waterproofing with FIBREX
We produce excellent quality and durable elastomeric polymer modified waterproofing compound for providing external water proofing against moisture. As such, the range is highly utilized for water reservoirs, swimming pools as well as balconies. Our elastomeric polymer modified waterproofing compound is available for the clients at the market leading prices.
Features:
Two-component compound
Flexible waterproofing coating
Good elasticity for free movements
Shows impermeability under positive & negative loads
Waterproofing Products
FIBLASTIC-PUFIBLASTIC PLASTERFIBWEATHERFIBSILICON-(WB/SB)
FIBLASTIC-PU
Polyurethane Aliphatic Liquid Applied Membrane
Description: -One component reactive liquid applied
elastomeric membrane which can be sprayed or hand applied.
Tensile Strength : >2.0 Mpa.Elongation : >350%Shore Hardness : (A):81Peel Adhesion : 1.5 Mpa.Crack Birding : 2mm
FIBLASTIC-PU
Coverage: -1.9kg /m2 for 1mm thickness.
Features:- Single Component Slip Resistance UV & weather resistance No pre-striping of existing cracks required Excellent wear resistance Vapour Permeable membrane
FIBLASTIC PLASTER
Elastomeric Waterproofing CoatingDescription: -
Fiblastic Plaster is ready to use 2-component plaster based on cement with carefully graded aggregates in combination with selected admixtures & synthetic resins.
Coverage: -2.5kg /m2 for 1.5mm thickness.
FIBLASTIC PLASTER
Features:- It can bridge Hair Cracks Good elasticity takes care of expansion,
contraction & other movements. It is impermeable under positive & negative
load
FIBWAETHER
Liquid Applied Waterproofing MembraneDescription: -
Fibweather is a unique elastomeric high build coating based on a revolutionary acrylic polymer with quick-set capabilities to resist premature moisture attack. It provides durability, low temperature flexibility, excellent resistance to weathering and dirt pick-up.
Coverage: -400 gram /m2 for 200 micron
thickness.
FIBWAETHER
Features:- It provide a highly elastic, seamless film over
metal, built-up roofing, new urethane foam & Concrete.
Heat Resistant & UV resistant. Protects against mild acid & alkali fumes and
most airborne chemicals.
FIBSILICON-(WB & SB)
Colorless Water Repellent Surface TreatmentWB- Water BasedSB- Solvent Based
Description: -FIBSILICON is a liquid compound
which penetrates the pores of treated materials & provides a durable, invisible & highly effective water repellent film.
Coverage: -1 liter 5-6/m2 depend on the porosity
on the floor.
Application
STEP 1Remove dust, oil, remainders by using grinders and fresh water only. All substrate must be sound & clean
STEP 2Presence of holes to be cleaned & damped
STEP 3Filling of Holes with FIBPLUG.
STEP 4Honeycombing may be found by concrete pouring or pumping..
STEP 5Fill the honeycombing
STEP 6Damaged concrete
Application
STEP 7Fill the damaged area depending on the depth.
STEP 8Joint treatment – a joint between Vertical wall and ground must be Treated
STEP 9After surface treatment surface is ready for the application of the recommend product. Products will apply as per their recommend methodology.
top related