task description
Post on 06-Apr-2018
213 Views
Preview:
TRANSCRIPT
-
8/3/2019 Task Description
1/3
TASK DESCRIPTION
1. Dry Ice Limitation- To count the limitation of dry ice bring by an aircraft especially MASkargo newarriving A330-200f. This limitation is for safety to the passenger and aircraft
itself. This is because if too many dry ice bought by an air craft , if unexpectaccident or incidence happen, it may give big impact to aircraft especially pax
aircraft which bring passengger .
2. DGR statistics for Tran-shipment
-This is ongoing project,which every day transshipment depart in Kuala Lumpur
International Airport Advance Cargo Centre ( KLIA ACC) must be check for
dangerous good to be record. By this way, we can know what dangerous good
through KLIA, then the record of dangerous good must be send to Department of
Civil Aviation (DCA). Dangerous good classed in few classes which follow their type
and their level of dangerous which have declared by IATA. The classes of dangerousgoods are as follow :
Class 1 - Explosive
Class 2 - Gases
Class 3 - Flammable Liquids
Class 4 - Flammable Solids,
Class 5 - Oxidizing Substances and Organic Peroxide
Class 6 - Toxic and Infectious Substances
Class 7 Radioactive Substances
Class 8 - Corrosives
Class 9 - Miscellaneous Dangerous Goods
These dangerous goods have their UN number which this UN number will classified
their category and level of dangerous. Dangerous goods also must follow the
packing instruction provided by IATA to increase their safety while flying in height
sky which have a lot of bad consumption like depress, shaking, and so on which give
high impact to that dangerous goods to react. The tight instruction of packaging andpacking the dangerous goods must be follow in order to prevent danger to the
aircraft, environment, and passenger on board especially.
2. Periodical Inspection & review of checklist- Inspection is a one step to make sure safety is always in standard level or
maintain. So periodical inspection must be held, this is a way to maintain
the safety in work place especially in area of ACC which have a lot of
-
8/3/2019 Task Description
2/3
unexpect accident and incident. So, before it happen, the preventive step
must be held, prevent is better than cure. Periodical inspection normallyheld in every 3 month in each place. The inspection include in ware house
area, personal preventive equipment, airside, in the office, cold room and
so on.
4. ICIX card distribution and data update- ICIX is stand for I see I act, this is a form of reporting unsafe act/ unsafe
condition/ hazards. This form is distribute to all place of strategic locations
in ACC, which make easier to staff or people to make report if they saw the
situation we they thing can give danger to other people. After filling the form,
they must send to the personal incharge at safety department to entry the
data and send directly to the reponsible party which will take action of that
reported matter.
5. Statistics of DG- Every month, the statistics of dangerous good must be prepair. This report
is combination of 3 area which are import, export and transshipment. This
statistics of dangerous good is separate by carrier, destination and origin,
and so on.
6. Safety enforcement- Safety department also responsible to the safety of the worker in all area in
ACC, so to make sure all safety rule and regulation follow by them, theenforcement is need, especially in warehouse which it surround with over
weight and over size cargo, which if not have any preventive step maybe give
bad impact to the work and business. The safety enforcement focus to thepersons and environment which give effect to the worker in order to do their
job. For example, persons who want enter the warehouse must wearing
reflection jacket and safety boot, because in the ware house they are many
consumption to the person to get accident. By wearing safety boot can
prevent our toe and feet from any over weight cargo and by wearing
reflection jacket can notice folklift driver that have other persons in their
way. For somebody who breaking the safety rules may issues RM50 of
summon and if frequent happen, the pass will be take for temporary periods.
7. Preparing report of meeting ( IMS meeting)- IMS or intergrated management system, is a combination of 3 system which
are ISO 9001 for quality management system, ISO 14001 for environmentalmanagement system and OHSAS 18001 is for occupational safety and health
management system. This meeting is to update the situation happen and
planning for next year event.
8. Event assistant
-
8/3/2019 Task Description
3/3
- Helping any work need in the event, mostly a camera man, runner and so on.
9. Preparing monthly report for vendor mishandling- This report is for vendor mishandling, which in this report show theirquality of works, charges pending if they have any mishaling and error made
and so on
10.Prepare report for undeclared DG- Dangerous good which through KLIA ACC must be declare, if any
dangerous good are not declared, we must take notice about that and
need to record in the other report form.
11.Prepare report for oversize and over weight DG- sometimes some dangerous goods bought by aircraft is over weight and notfollow the rules, so we must take note about this. This is because some
dangerous good need to follow the weight regulation. If over the limit, it may
give hazard to the aircraft carried if it react.
12.Prepare safety and IMS course participants info to HR certificate give.- every course attend by attendant must take their information. This is for
prepairing the certificate of attendance. This certificate is the prove for themthat they have certified that course.
13.Prepare station operational Quality & Safety audit into audit master list.- MASkargo have 10 station operational abroad, these stations must alsofollow the quality & safety in order to standardize the quality of service by
company.
top related