stratix 8000™ and 8300™ - elmark · their reference architecture model is a ... the stratix...
Post on 27-Jul-2018
223 Views
Preview:
TRANSCRIPT
Stratix 8000™ and 8300™
Industrial Ethernet Switches
The Rockwell Automation Stratix 8000/8300 industrial Ethernet switch
line with Cisco technology is the fi rst of its kind. This modular managed
switch line uses the current Cisco Catalyst switch architecture and
feature set, along with powerful confi guration tools, helping to provide
secure integration with the enterprise network using tools familiar to IT
professionals. At the same time, it allows easy setup and diagnostics from
within the Rockwell Automation Integration Architecture using tools
familiar to manufacturing professionals.
The Stratix 8000 is a Layer 2 switch. The Stratix 8300 embodies the same
capabilities as the Stratix 8000, but is a Layer 3 switch that supports
routing between Subnets and VLANs.
Copper, fi ber, SFP and Power over Ethernet expansion modules can all
be added to a Stratix 8000/8300 system. Copper and Fiber expansion
modules can be combined to provide additional copper and fi ber ports on
your system. SFP expansion modules can add up to 12 fi ber ports with the
ability to mix and match multi-mode and single mode SFPs. Power over
Ethernet (PoE) modules pass electrical power along with data on Ethernet
cabling. This allows a single cable to provide both data connection and
electrical power to devices such as wireless access points – reducing
wiring and improving the ability to turn devices on/off for power savings
and added security.
• Layer 3 routing
• Power over Ethernet expansion
modules helps reduce wiring cost
• Management and diagnostics within
both IT and controls environment
• Removable CompactFlash stores
confi guration for easy device
replacement
• Default confi gurations for industrial
automation and EtherNet/IP devices
(Global and Smartports)
• EtherNet/IP interface to the
Integrated Architecture®
• RSLogix™ 5000 for confi guration via
Add-on Profi les
• Predefi ned Logix tags for diagnostics
• FactoryTalk® View Faceplates for status
monitoring and alarming
• Secure integration with enterprise
network
• Cisco internet operating system (IOS)
• Common confi guration tools; command
line interface (CLI), Cisco network
assistant (CNA) and Device Manager
(see Figure 2)
Kevin Seeley, ITS Manager at Kimberly-Clark Corporation
believes “the partnership between
Rockwell Automation and Cisco Systems
is the fi rst step in helping address needed
industry standards and best practices.
Their reference architecture model is a
foundational building block for delivering
security and reliability for the interconnect-
ed manufacturing and corporate systems
worlds. Companies will be looking to
Rockwell Automation and Cisco Systems
over the coming months to continue the
momentum in developing and leading the
market in establishing a common set of
standards and best practices for the
manufacturing infrastructure environment.”
Environmental Certifi cations Dimensions
Base Modules
1783-MS06T 6 port Layer 2 managed Power Input: 24/48 VDC
Operating Temp: -40 ºC to 60 ºC
Enclosure Rating: IP20
Operating Shock: 20g
Vibration: 2g@10-50 OHz
Humidity: 5-95% Condensing
Fanless Operation
Class 1 Div 2
c-UL-us
CE
C-Tick
Ex
EtherNet/IP
Marine*
147 mm H, 152 mm W,112 mm D1783-MS10T 10 port Layer 2 managed
1783-RMS06T 6 port Layer 3 managed
1783-RMS10T 10 port Layer 3 managed
Expansion Modules
1783-MX08T 8 port copper 147 mm H, 97 mm W,112 mm D1783-MX08F 8 port fi ber
Fiber Optic Uplink (SFPs)
1783-SFP100FX 100 Base-FX Multimode Transceiver
1783-SFP100LX 100 Base-LX Multimode Transceiver
1783-SFP1GSX 1000 Base-SX Multimode Transceiver
1783-SFP1GLX 1000 Base-LX Multimode Transceiver
Publication ENET–PP002C–EN-P – April 2014 Copyright ©2014 Rockwell Automation, Inc. All Rights Reserved. Printed in USA.Supersedes Publication ENET–PP002B–EN-P – January 2010
Allen-Bradley, FactoryTalk, Integrated Architecture, Listen.Think.Solve., RSLogix , Stratix 8000 and Stratix 8300 are trademarks of Rockwell Automation Inc.Trademarks not belonging to Rockwell Automation are property of their respective companies.
Base Modules(6 port or 10 port)
Figure 1: The Stratix 8000 and Stratix 8300 product line off ers
premier integration into the Integrated Architecture via an
RSLogix 5000 Add-on Profi le.
Figure 2: The Cisco Network Assistant (CAN) is applicable to both
IT and control system personnel and provides both switch
confi guration and network management assistance. Additionally,
IT can manage the Stratix 8000 and Stratix 8300 switches using
the Cisco Command Line Interface (CLI) and Device Manager.
Specifi cations
*For specifi c Marine agency compliance http://www.rockwellautomation.com/products/certifi cation More detailed information is available in the Stratix 8000 Installation Manual Publication 1783-IN005D-EN-P
Layer 3 Routing
As the evolution of Ethernet on the plant fl oor continues to
grow exponentially with new applications such as motion,
safety and I/O, IP traffi c has increased signifi cantly and proper
segmentation to the network is becoming more important.
VLANs become a best practice to segment networks by function
rather than location in the plant. The Stratix 8300 with Layer 3
functionality provides communications between the segmented
networks for better performance and better security.
Proper segmentation allows users to:
• Avoid the high cost of expanding plant networks when increasing production by adding new machines
• Improve performance compared to software-based routers
• Protect against broadcast noice while allowing workstations access to the required resources
Power OverEthernet Module
Dual Purpose Uplink Ports10/100/1000
Copper or Fiber Optic Uplink SFP
Data Ports10/100 Copper
8 Extended Data Ports
10/100 Copper
8 Extended Data Ports
100 Base-FX
4 Port PoE or PoE+ Plus 4 Port
10/100 Copper
Expansion Modules(8 port or 10 port) (8 port Fiber)
top related