sl17176a andy replacement blade match guide · andy aluminum handled snips replacement blade guide...

Andy Aluminum Handled Snips Replacement Blade Guide

12-in. Pattern CuttingLight Gray Frame: Slim Contour Styling with Large Loops3-in. Inset Steel BladesFlat Ground EdgesExtended Tips

Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.

M12N M12NG USE:M12NRB

12-in. Combination CuttingDark Gray Frame: Slim Contour Styling with Large Loops3-in. Inset Steel Blades:Bevel Ground EdgesExtended Tips

Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.

MC12N MC12NG USE:MC12NRB

12-in. Pattern CuttingLight Gray Frame: Rounded Contour Styling and Loops3-in. Inset Steel BladesFlat Ground Edges

12-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-in. Inset Steel Blades:Bevel Ground Edges

12-in. Pattern CuttingMetallic Gray Frame: Rounded Contour Styling and Loops3-in. RIVETED Inset Steel Blades: Flat Ground Edges

12-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-in. RIVETED Inset Steel Blades: Bevel Ground Edges

4 Screws supplied with these blades.

4 Screws supplied with these blades.

Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.

Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.

M12A

MC12A

M12

MC12

Gripped

Gripped

ORIGINAL

ORIGINAL

USE:M12ARB

USE:MC12ARB

USE:M12RB

USE:MC12RB

Malco Products, SBC | Annandale, Minnesota, U.S.A. | www.malcotools.com | ©2017U.S. 320-274-7387 - 800-328-3530 | Canada: 320-274-2376 - 800-219-1085 | International: 01-320-274-2376

SL17176A

14-in. Pattern CuttingLight Gray Frame: Slim Contour Styling with Large Loops3-1/4-in. Inset Steel Blades:Flat Ground Edges

Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.

M14N USE:M14NRB

14-in. Combination CuttingDark Gray Frame: Slim Contour Styling with Large Loops3-1/4 in. Inset Steel Blades:Bevel Ground Edges

Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.

MC14N USE:MC14NRB

14-in. Pattern CuttingLight Gray Frame: Rounded Contour Styling and Loops3-1/4 in. Inset Steel Blades:Flat Ground Edges

14-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-1/4 in. Inset Steel Blades:Bevel Ground Edges

14-in. Pattern CuttingMetallic Gray Frame: Rounded Contour Styling and Loops3-1/4 in. RIVETED Inset Steel Blades: Flat Ground Edges

14-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-1/4 in. RIVETED Inset Steel Blades: Bevel Ground Edges

4 Screws supplied with these blades.

4 Screws supplied with these blades.

Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.

Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.

M14A

MC14A

M14

MC14

ORIGINAL

ORIGINAL

USE:M14ARB

USE:MC14ARB

USE:M14RB

USE:MC14RB