sl17176a andy replacement blade match guide · andy aluminum handled snips replacement blade guide...
TRANSCRIPT
Andy Aluminum Handled Snips Replacement Blade Guide
12-in. Pattern CuttingLight Gray Frame: Slim Contour Styling with Large Loops3-in. Inset Steel BladesFlat Ground EdgesExtended Tips
Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.
M12N M12NG USE:M12NRB
12-in. Combination CuttingDark Gray Frame: Slim Contour Styling with Large Loops3-in. Inset Steel Blades:Bevel Ground EdgesExtended Tips
Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.
MC12N MC12NG USE:MC12NRB
12-in. Pattern CuttingLight Gray Frame: Rounded Contour Styling and Loops3-in. Inset Steel BladesFlat Ground Edges
12-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-in. Inset Steel Blades:Bevel Ground Edges
12-in. Pattern CuttingMetallic Gray Frame: Rounded Contour Styling and Loops3-in. RIVETED Inset Steel Blades: Flat Ground Edges
12-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-in. RIVETED Inset Steel Blades: Bevel Ground Edges
4 Screws supplied with these blades.
4 Screws supplied with these blades.
Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.
Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.
M12A
MC12A
M12
MC12
Gripped
Gripped
ORIGINAL
ORIGINAL
USE:M12ARB
USE:MC12ARB
USE:M12RB
USE:MC12RB
Malco Products, SBC | Annandale, Minnesota, U.S.A. | www.malcotools.com | ©2017U.S. 320-274-7387 - 800-328-3530 | Canada: 320-274-2376 - 800-219-1085 | International: 01-320-274-2376
SL17176A
14-in. Pattern CuttingLight Gray Frame: Slim Contour Styling with Large Loops3-1/4-in. Inset Steel Blades:Flat Ground Edges
Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.
M14N USE:M14NRB
14-in. Combination CuttingDark Gray Frame: Slim Contour Styling with Large Loops3-1/4 in. Inset Steel Blades:Bevel Ground Edges
Pressure Fit Blades Uses existing pivot bolt. No new fasteners needed.
MC14N USE:MC14NRB
14-in. Pattern CuttingLight Gray Frame: Rounded Contour Styling and Loops3-1/4 in. Inset Steel Blades:Flat Ground Edges
14-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-1/4 in. Inset Steel Blades:Bevel Ground Edges
14-in. Pattern CuttingMetallic Gray Frame: Rounded Contour Styling and Loops3-1/4 in. RIVETED Inset Steel Blades: Flat Ground Edges
14-in. Combination CuttingDark Gray Frame: Rounded Contour Styling and Loops3-1/4 in. RIVETED Inset Steel Blades: Bevel Ground Edges
4 Screws supplied with these blades.
4 Screws supplied with these blades.
Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.
Supplied with 4 Screws and Barrel Nuts to replace original rivet fasteners.
M14A
MC14A
M14
MC14
ORIGINAL
ORIGINAL
USE:M14ARB
USE:MC14ARB
USE:M14RB
USE:MC14RB