rs485-can mcon-232 integration module mcon-232 ......to the can ampio smart home standard. it is a...

General featuresMCON-232 module is a component of the Ampio Smart Home systemand is designed to convert the transmission from devicesequipped with RS232 port to CAN-Bus standard.

Module is controlled via CAN-Bus. Required voltage to power the module is 11-16V DC.

The device is equipped with RS232 connector, CAN bus connector,and two LED indicators, green and red.

The green LED indicates the status of CAN communication

one regular flash every 1 sec. - CAN-Bus communication in order two regular flashes every 1 sec. - module is not receiving information from other SmartHome modules three regular flashes every 1 sec. - module cannot send information to CAN-Bus

The red LED indicates transmission via RS232 port.

The module provides integration of any device equipped with RS232serial port with the Ampio Smart Home system. These include air conditioning units, recuperators, home audio systems, TV, home alarms etc.

SoftwareIts multi-functionality is the reason why MCON-232 module is one of very few devices which do not update automatically. Software is uploaded manually by choosing correct program file.

Dedicated software is identified by its filename with the syntaxmostly compatible with naming standards assumed for updatesof Ampio Smart Home devices. The only difference is that last twodigits of the software version specify its purpose.

The filename template interpretation is as follows:: ampio_TXXX_PYYY_SZZZTT.amp

XXX device type, 25 for MCON devices;YYY hardware version;ZZZ software version;TT software purpose.

Symbol Description

TEST Software for testing the device

INTEGRA Integration with Satel Integra alarm system

UNI-ONEWAY Oneway integrations, sending any commands

SPECIAL Software made for specific integrations

List of aviable softwares for different values

Technical dataPower supply voltage

11-16V DC

Current consumption 50 mA

Communication connector RS232

Dimensionswidth 35 mmheigth 120 mmdepth 65 mm

maximal 400 mA quiescent

MCON-232RS232-CAN Integration Module

ver 1.7, 27.08.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.

www.ampio.pl

MODULE DESCRIPTION

MCON-232RS232-CAN Integration Module

90

12

0 35

55

,75

90

51

65

CANLOW

CANHI

+12V DC

GND+

RS232

MODULE MCON-232CAN - RS232

TX GNDRX

GND

RX

TX1

5

6

9

SideMCON232

DB-9 plug connected to

the integrated device

INTEGRATED DEVICEin the case of devices verifying the DSR signal,

such as a SATEL INTEGRA, you need to make

an additional jumper marked in red in the picture

ATTENTION:

ver 1.7, 27.08.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.

www.ampio.pl

Dimensions expressed in mm

MODULE DIMENSIONS

CANLOW

CANHI

+12V DC

GND+

RS232

MODULE MCON-232CAN - RS232

TX GNDRX

GN

D

+1

2V

CA

N L

ow

CA

N H

igh

9

8

7

6

5

4

3

2

1

5

4

3

2

1

9

8

7

6

Pinout of individual pins

of the RS-232 connector

RS-232DB-9 connector

of integrated device

CAN Network 4

* Pin and short circuit is only required on certain devices1, 4 6

MCON-232RS232-CAN Integration Module

ver 1.7, 27.08.2020 Copyright © 2020 Ampio Sp. z o.o. All rights reserved. This document is not intended for reproduction or distribution.

www.ampio.pl

CONNECTION DIAGRAM