retro series cove™ rj & cove™ lg - dekkocove™ rj and cove™ lg’s intentional designs...
Post on 06-Mar-2021
1 Views
Preview:
TRANSCRIPT
Cove™ RJ and Cove™ LG’s intentional designs accommodate furniture manufacturer cutout sizes: 2.0” x 6.75” and 2.5” x 6.0” for universal retrofit opportunities. With DaisyLink™ abilities, you gain seamless enhancements while magnifying power supply within your applications. From a single infeed, multiple units connect in any arrangement using the modular 4 wire 2 circuit electrical system.
M O D U L A R C O N N E C T I O N S
C O V E ™ R J & C O V E ™ L G DAISYLINK™
R E T R O S E R I E S
FIT
TO DESIGN.
DESIGN E D TO FIT.
F E A T U R E S :
Mounting Capabilities
Bezel /In-Surface
Applications
Ancillary Furniture
Work Surfaces
Training Tables
Soft-Sided Seating
Standard Finishes*
Silver Pearl
Black
Gloss White
Brushed Aluminum
10 Mountain View Drive l Shelton, CT 06484 l P: 203.924.6617 l dekkopower.com
*Interested in our specialty finishes? Contact us for details.
C O V E ™ R J & L G S E R I E S - D A I S Y L I N K
Mounting capabilities and series dimensions on following page...
DAISYLINK™ COMPONENTSRefer to Daisylink™ components page in ordering information for details
U N I V E R S A L S P E C I F I C A T I O N S :
• 15A/120V AC Spill-Resistant Receptacles
• 2.1A/5V Shared; Dual USB Charging Ports
• Used with 4 Wire 2 Circuit Starter and Interconnecting Cables
(Purchased Separately)
• Hardwire Starter & Interconnecting Cable Lengths:
Minimum 12” - 180” Maximum (Specify in 1” Increments)
• Circuit 1 and 2 Options - Link Up-to 40 Receptacles Across 2
Circuits (US Only)
• Clamp and Screw Mounting Capabilities (Screw-Mount
Configurations Available Upon Request)
• ETL Listed for US and Canada
C O V E R J & R J 2 S P E C I F I C A T I O N S :
• Data Knockout(s) - Keystone Data Options Available;
(Purchased Separately)
• Fits Table Thicknesses :
• Cove RJ - 0.25” - 1.25”
• Cove RJ2 - 0.25” - 1.50”
• Fits Table Cutout: 2.0” x 6.75”
• Optional Mounting Bracket for Surface Thicknesses
Up-to 1.50”
C O V E L G S P E C I F I C A T I O N S :
• Fits Table Thicknesses: 0.25” - 1.50”
• Fits Table Cutout: 2.50”- 2.75” x 6.0”
COVE™ LGCOVE™ RJ2 (DATA JACKS NOT INCLUDED)
COVE™ RJ2
COVE™ LG
COVE™ RJ
10 Mountain View Drive l Shelton, CT 06484 l P: 203.924.6617 l dekkopower.com
M O U N T I N G C A P A B I L I T I E S
Ordering information on following page...
P R O D U C T D I M E N S I O N S
CLAMP-MOUNT BRACKETS ARE NOT SHOWN IN LINE ART DIAGRAMS
CLAMP-MOUNT | POWER, USB & DATA | POWER & USB
NOTE - FOR ALL UNITS SHOWN BELOW:
UNIT WIDTH = 1.80”UNIT DEPTH = 3.12”
FACEPLATE WIDTH = 2.50”
Clamp-Mount (Featured to the right) -
• Intended Applications: desks, benches, tables; ide-al for surfaces that provide access to back of unit
• Tool-free installation: unit is fastened to furniture from the rear by tightening the thumbscrews
Screw-Mount (Featured to the left) -
• Intended Applications: soft sided seating, lounge furniture, support columns; ideal for surfaces where there is limited, or no access to back of unit
• Installation - requires tools: screws (not included) are installed from the front of the unit, through the faceplate, fastening the Cove™ to the furniture
COVE RJ:
2 RECEPTACLES
1 DUAL USB PORT
1 DATA KNOCKOUT
COVE LG:
2 RECEPTACLES
1 DUAL USB PORT
COVE RJ2:
2 RECEPTACLES
1 DUAL USB PORT
2 DATA KNOCKOUTS
10 Mountain View Drive l Shelton, CT 06484 l P: 203.924.6617 l dekkopower.com
S E L E C T Y O U R P O W E R : C H O O S E Y O U R F I N I S H :
2 1 1
2 1 2
2 1 -
COVE™ RJ CLAMP-MOUNT | POWER, USB & DATA | CIRCUIT 1
COVE™ RJ2 CLAMP-MOUNT | POWER, USB & DATA | CIRCUIT 1
COVE™ LG CLAMP-MOUNT | POWER & USB | CIRCUIT 1
COV-RJ-2U-4-1-S
COV-RJ2-2U-4-1-S
COV-LG-2U-4-1-S
COV-RJ-2U-4-1-B
COV-RJ2-2U-4-1-B
COV-LG-2U-4-1-B
COV-RJ-2U-41-GW
COV-RJ2-2U-41-GW
COV-LG-2U-4-1-GW
COV-RJ-2U-41-AL
COV-RJ2-2U-41-AL
COV-LG-2U-4-1-AL
Change 4-1 to 4-2 in part number to specify circuit 2 configurationsScrew-mount configurations available upon reQuest - contact us for more detailsdata knockout options purchased separatelyCall for pricing
DaisyLink™ components on following page...
O R D E R I N G I N F O R M A T I O N
D A I S Y L I N K ™ C O N F I G U R A T I O N S
powerReceptacles
dual usb ports
dataknockout Silver Pearl Black Gloss White
B r u s h e d Aluminum
PART NUMBER
COV-1.5-BRKT• Optional mounting bracket for table thicknesses up-to 1.50”, Black Finish (For Cove RJ Only)
M O U N T I N G A C C E S S O R I E S :
FINISHDESCRIPTION
PART NUMBERFINISHDESCRIPTION
Black
S E L E C T Y O U R D A T A K N O C K O U T O P T I O N S :
Additional data options available Please contact our knowledgeable customer service team for more details
Black
Black
BlackWhite
RJ45-B
HDMI-KEY-B
USB-20AA-B-72K USB-20AA-W-72K
A. RJ45 cat 6 punch down data jack; Siemon™ brand
B. HDMI keystone jack, female/female
C. USB 2.0 Type-A keystone, female/female
A. B. C.
10 Mountain View Drive l Shelton, CT 06484 l P: 203.924.6617 l dekkopower.com
SS-COVRJLGDAISYLINK REV-C
D A I S Y L I N K ™ C O M P O N E N T S
S E L E C T Y O U R S T A R T E R I N F E E D O P T I O N :
A. Hardwired multi-circuit starter infeed with female DaisyLink™ connector; hardwires into electrical junction box *Specify in increments of 1” Cable Lengths in Part Number
B. Molded 3-prong plug single-circuit starter power Infeed with female DaisyLink™ connector; plugs directly into wall or floor outlet
C. Quick Disconnect multi-circuit wall/floor insert with male DaisyLink™ connector; wires into junction box to accept female DaisyLink™ interconnecting cable (To be used with 42 FF-XXX interconnecting cable - see below)
12” Min - 180” Max
72”
Black
LENGTH/FINISHDESCRIPTION PART NUMBER
42 SB2-XXX*
42 20AP1-72”
42 QD INSERT
To learn how to configure and assemble a 4 wire 2 circuit system, see daisylink™ system literature for details - or contact our knowledgeable customer service team for additional support
C H O O S E Y O U R I N T E R C O N N E C T I N G C A B L E S :
D. Female/Female Interconnecting Cable *Specify in increments of 1” Cable Lengths in Part Number
E. Female/Male Interconnecting Cable *Specify in increments of 1” Cable Lengths in Part Number
F. T-Connector used to branch cabling in different directions; 2 male and 1 female endings
G. Nylon Black Cable Covers - Add “B” to cabling part number
Black
Black
12” Min - 180” Max
12”Min - 180” Max
42 FF-XXX*
42 FM-XXX*
DaisyT
Cable Covers ”B”
LENGTH/FINISHDESCRIPTION PART NUMBER
O R D E R I N G I N F O R M A T I O N ( C O N T )
A. B. C.
D. E. F. G.
top related